User gets notification for every engine error report, but he still
lacks the exact engine information. Hence, we allow user to query
for the exact engine reported an error.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Kalle Valo says:
====================
wireless-next patches for v6.7
The first pull request for v6.7, with both stack and driver changes.
We have a big change how locking is handled in cfg80211 and mac80211
which removes several locks and hopefully simplifies the locking
overall. In drivers rtw89 got MCC support and smaller features to
other active drivers but nothing out of ordinary.
Major changes:
cfg80211
- remove wdev mutex, use the wiphy mutex instead
- annotate iftype_data pointer with sparse
- first kunit tests, for element defrag
- remove unused scan_width support
mac80211
- major locking rework, remove several locks like sta_mtx, key_mtx
etc. and use the wiphy mutex instead
- remove unused shifted rate support
- support antenna control in frame injection (requires driver support)
- convert RX_DROP_UNUSABLE to more detailed reason codes
rtw89
- TDMA-based multi-channel concurrency (MCC) support
iwlwifi
- support set_antenna() operation
- support frame injection antenna control
ath12k
- WCN7850: enable 320 MHz channels in 6 GHz band
- WCN7850: hardware rfkill support
- WCN7850: enable IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS to make scan faster
ath11k
- add chip id board name while searching board-2.bin
* tag 'wireless-next-2023-10-06' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (272 commits)
wifi: rtlwifi: remove unreachable code in rtl92d_dm_check_edca_turbo()
wifi: rtw89: debug: txpwr table supports Wi-Fi 7 chips
wifi: rtw89: debug: show txpwr table according to chip gen
wifi: rtw89: phy: set TX power RU limit according to chip gen
wifi: rtw89: phy: set TX power limit according to chip gen
wifi: rtw89: phy: set TX power offset according to chip gen
wifi: rtw89: phy: set TX power by rate according to chip gen
wifi: rtw89: mac: get TX power control register according to chip gen
wifi: rtlwifi: use unsigned long for rtl_bssid_entry timestamp
wifi: rtlwifi: fix EDCA limit set by BT coexistence
wifi: rt2x00: fix MT7620 low RSSI issue
wifi: rtw89: refine bandwidth 160MHz uplink OFDMA performance
wifi: rtw89: refine uplink trigger based control mechanism
wifi: rtw89: 8851b: update TX power tables to R34
wifi: rtw89: 8852b: update TX power tables to R35
wifi: rtw89: 8852c: update TX power tables to R67
wifi: rtw89: regd: configure Thailand in regulation type
wifi: mac80211: add back SPDX identifier
wifi: mac80211: fix ieee80211_drop_unencrypted_mgmt return type/value
wifi: rtlwifi: cleanup few rtlxxxx_set_hw_reg() routines
...
====================
Link: https://lore.kernel.org/r/87jzrz6bvw.fsf@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Defining a prctl flag as an int is a footgun because on a 64 bit machine
and with a variadic implementation of prctl (like in musl and glibc), when
used directly as a prctl argument, it can get casted to long with garbage
upper bits which would result in unexpected behaviors.
This patch changes the constant to an unsigned long to eliminate that
possibilities. This does not break UAPI.
I think that a stable backport would be "nice to have": to reduce the
chances that users build binaries that could end up with garbage bits in
their MDWE prctl arguments. We are not aware of anyone having yet
encountered this corner case with MDWE prctls but a backport would reduce
the likelihood it happens, since this sort of issues has happened with
other prctls. But If this is perceived as a backporting burden, I suppose
we could also live without a stable backport.
Link: https://lkml.kernel.org/r/20230828150858.393570-5-revest@chromium.org
Fixes: b507808ebc ("mm: implement memory-deny-write-execute as a prctl")
Signed-off-by: Florent Revest <revest@chromium.org>
Suggested-by: Alexey Izbyshev <izbyshev@ispras.ru>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ayush Jain <ayush.jain3@amd.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Joey Gouly <joey.gouly@arm.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Szabolcs Nagy <Szabolcs.Nagy@arm.com>
Cc: Topi Miettinen <toiwoton@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
commit c35559f94e ("x86/shstk: Introduce map_shadow_stack syscall")
recently added support for map_shadow_stack() but it is limited to x86
only for now. There is a possibility that other architectures (namely,
arm64 and RISC-V), that are implementing equivalent support for shadow
stacks, might need to add support for it.
Independent of that, reserving arch-specific syscall numbers in the
syscall tables of all architectures is good practice and would help
avoid future conflicts. map_shadow_stack() is marked as a conditional
syscall in sys_ni.c. Adding it to the syscall tables of other
architectures is harmless and would return ENOSYS when exercised.
Note, map_shadow_stack() was assigned #453 during the merge process
since #452 was taken by fchmodat2().
For Powerpc, map it to sys_ni_syscall() as is the norm for Powerpc
syscall tables.
For Alpha, map_shadow_stack() takes up #563 as Alpha still diverges from
the common syscall numbering system in the other architectures.
Link: https://lore.kernel.org/lkml/20230515212255.GA562920@debug.ba.rivosinc.com/
Link: https://lore.kernel.org/lkml/b402b80b-a7c6-4ef0-b977-c0f5f582b78a@sirena.org.uk/
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Resolve several conflicts, mostly between changes/fixes in
wireless and the locking rework in wireless-next. One of
the conflicts actually shows a bug in wireless that we'll
want to fix separately.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Before Google adopted FQ for its production servers,
we had to ensure AF4 packets would get a higher share
than BE1 ones.
As discussed this week in Netconf 2023 in Paris, it is time
to upstream this for public use.
After this patch FQ can replace pfifo_fast, with the following
differences :
- FQ uses WRR instead of strict prio, to avoid starvation of
low priority packets.
- We make sure each band/prio tracks its own usage against sch->limit.
This was done to make sure flood of low priority packets would not
prevent AF4 packets to be queued. Contributed by Willem.
- priomap can be changed, if needed (default value are the ones
coming from pfifo_fast).
In this patch, we set default band weights so that :
- high prio (band=0) packets get 90% of the bandwidth
if they compete with low prio (band=2) packets.
- high prio packets get 75% of the bandwidth
if they compete with medium prio (band=1) packets.
Following patch in this series adds the possibility to tune
the per-band weights.
As we added many fields in 'struct fq_sched_data', we had
to make sure to have the first cache line read-mostly, and
avoid wasting precious cache lines.
More optimizations are possible but will be sent separately.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Dave Taht <dave.taht@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This series from Patrisious extends mlx5 to support IPsec packet offload
in multiport devices (MPV, see [1] for more details).
These devices have single flow steering logic and two netdev interfaces,
which require extra logic to manage IPsec configurations as they performed
on netdevs.
Thanks
[1] https://lore.kernel.org/linux-rdma/20180104152544.28919-1-leon@kernel.org/
Link: https://lore.kernel.org/all/20231002083832.19746-1-leon@kernel.org
Signed-of-by: Leon Romanovsky <leon@kernel.org>
* mlx5-next: (576 commits)
net/mlx5: Handle IPsec steering upon master unbind/bind
net/mlx5: Configure IPsec steering for ingress RoCEv2 MPV traffic
net/mlx5: Configure IPsec steering for egress RoCEv2 MPV traffic
net/mlx5: Add create alias flow table function to ipsec roce
net/mlx5: Implement alias object allow and create functions
net/mlx5: Add alias flow table bits
net/mlx5: Store devcom pointer inside IPsec RoCE
net/mlx5: Register mlx5e priv to devcom in MPV mode
RDMA/mlx5: Send events from IB driver about device affiliation state
net/mlx5: Introduce ifc bits for migration in a chunk mode
Linux 6.6-rc3
...
While the Feature ID range is well defined and pretty large, it isn't
inconceivable that the architecture will eventually grow some other
ranges that will need to similarly be described to userspace.
Add a VM ioctl to allow userspace to get writable masks for feature ID
registers in below system register space:
op0 = 3, op1 = {0, 1, 3}, CRn = 0, CRm = {0 - 7}, op2 = {0 - 7}
This is used to support mix-and-match userspace and kernels for writable
ID registers, where userspace may want to know upfront whether it can
actually tweak the contents of an idreg or not.
Add a new capability (KVM_CAP_ARM_SUPPORTED_FEATURE_ID_RANGES) that
returns a bitmap of the valid ranges, which can subsequently be
retrieved, one at a time by setting the index of the set bit as the
range identifier.
Suggested-by: Marc Zyngier <maz@kernel.org>
Suggested-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Jing Zhang <jingzhangos@google.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20231003230408.3405722-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
There are several scenarios that have come up where having a user_event
persist even if the process that registered it exits. The main one is
having a daemon create events on bootup that shouldn't get deleted if
the daemon has to exit or reload. Another is within OpenTelemetry
exporters, they wish to potentially check if a user_event exists on the
system to determine if exporting the data out should occur. The
user_event in this case must exist even in the absence of the owning
process running (such as the above daemon case).
Expose the previously internal flag USER_EVENT_REG_PERSIST to user
processes. Upon register or delete of events with this flag, ensure the
user is perfmon_capable to prevent random user processes with access to
tracefs from creating events that persist after exit.
Link: https://lkml.kernel.org/r/20230912180704.1284-2-beaub@linux.microsoft.com
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Report the maximum number of IBs that can be pushed with a single
DRM_IOCTL_NOUVEAU_EXEC through DRM_IOCTL_NOUVEAU_GETPARAM.
While the maximum number of IBs per ring might vary between chipsets,
the kernel will make sure that userspace can only push a fraction of the
maximum number of IBs per ring per job, such that we avoid a situation
where there's only a single job occupying the ring, which could
potentially lead to the ring run dry.
Using DRM_IOCTL_NOUVEAU_GETPARAM to report the maximum number of IBs
that can be pushed with a single DRM_IOCTL_NOUVEAU_EXEC implies that
all channels of a given device have the same ring size.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231002135008.10651-3-dakr@redhat.com
commit 'be65de6b03aa ("fs: Remove dcookies support")' removed the
syscall definition for lookup_dcookie. However, syscall tables still
point to the old sys_lookup_dcookie() definition. Update syscall tables
of all architectures to directly point to sys_ni_syscall() instead.
Signed-off-by: Sohil Mehta <sohil.mehta@intel.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Namhyung Kim <namhyung@kernel.org> # for perf
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Both glibc and musl define 'struct sched_param' in sched.h, while kernel
has it in uapi/linux/sched/types.h, making it cumbersome to use
sched_getattr(2) or sched_setattr(2) from userspace.
For example, something like this:
#include <sched.h>
#include <linux/sched/types.h>
struct sched_attr sa;
will result in "error: redefinition of ‘struct sched_param’" (note the
code doesn't need sched_param at all -- it needs struct sched_attr
plus some stuff from sched.h).
The situation is, glibc is not going to provide a wrapper for
sched_{get,set}attr, thus the need to include linux/sched_types.h
directly, which leads to the above problem.
Thus, the userspace is left with a few sub-par choices when it wants to
use e.g. sched_setattr(2), such as maintaining a copy of struct
sched_attr definition, or using some other ugly tricks.
OTOH, 'struct sched_param' is well known, defined in POSIX, and it won't
be ever changed (as that would break backward compatibility).
So, while 'struct sched_param' is indeed part of the kernel uapi,
exposing it the way it's done now creates an issue, and hiding it
(like this patch does) fixes that issue, hopefully without creating
another one: common userspace software rely on libc headers, and as
for "special" software (like libc), it looks like glibc and musl
do not rely on kernel headers for 'struct sched_param' definition
(but let's Cc their mailing lists in case it's otherwise).
The alternative to this patch would be to move struct sched_attr to,
say, linux/sched.h, or linux/sched/attr.h (the new file).
Oh, and here is the previous attempt to fix the issue:
https://lore.kernel.org/all/20200528135552.GA87103@google.com/
While I support Linus arguments, the issue is still here
and needs to be fixed.
[ mingo: Linus is right, this shouldn't be needed - but on the other
hand I agree that this header is not really helpful to
user-space as-is. So let's pretend that
<uapi/linux/sched/types.h> is only about sched_attr, and
call this commit a workaround for user-space breakage
that it in reality is ... Also, remove the Fixes tag. ]
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230808030357.1213829-1-kolyshkin@gmail.com
Compared with normal doorbell, using record doorbell can shorten the
process of ringing the doorbell and reduce the latency.
Add a flag HNS_ROCE_CAP_FLAG_SRQ_RECORD_DB to allow FW to
enable/disable SRQ record doorbell.
If the flag above is set, allocate the dma buffer for SRQ record
doorbell and write the buffer address into SRQC during SRQ creation.
For userspace SRQ, add a flag HNS_ROCE_RSP_SRQ_CAP_RECORD_DB to notify
userspace whether the SRQ record doorbell is enabled.
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20230926130026.583088-1-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Add LoongArch KVM related header files, including kvm.h, kvm_host.h and
kvm_types.h. All of those are about LoongArch virtualization features
and kvm interfaces.
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Tested-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Tianrui Zhao <zhaotianrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
TCQ_F_CAN_BYPASS can be used by few qdiscs.
Idea is that if we queue a packet to an empty qdisc,
following dequeue() would pick it immediately.
FQ can not use the generic TCQ_F_CAN_BYPASS code,
because some additional checks need to be performed.
This patch adds a similar fast path to FQ.
Most of the time, qdisc is not throttled,
and many packets can avoid bringing/touching
at least four cache lines, and consuming 128bytes
of memory to store the state of a flow.
After this patch, netperf can send UDP packets about 13 % faster,
and pktgen goes 30 % faster (when FQ is in the way), on a fast NIC.
TCP traffic is also improved, thanks to a reduction of cache line misses.
I have measured a 5 % increase of throughput on a tcp_rr intensive workload.
tc -s -d qd sh dev eth1
...
qdisc fq 8004: parent 1:2 limit 10000p flow_limit 100p buckets 1024
orphan_mask 1023 quantum 3028b initial_quantum 15140b low_rate_threshold 550Kbit
refill_delay 40ms timer_slack 10us horizon 10s horizon_drop
Sent 5646784384 bytes 1985161 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
flows 122 (inactive 122 throttled 0)
gc 0 highprio 0 fastpath 659990 throttled 27762 latency 8.57us
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds support for IORING_OP_FUTEX_WAITV, which allows registering a
notification for a number of futexes at once. If one of the futexes are
woken, then the request will complete with the index of the futex that got
woken as the result. This is identical to what the normal vectored futex
waitv operation does.
Use like IORING_OP_FUTEX_WAIT, except sqe->addr must now contain a
pointer to a struct futex_waitv array, and sqe->off must now contain the
number of elements in that array. As flags are passed in the futex_vector
array, and likewise for the value and futex address(es), sqe->addr2
and sqe->addr3 are also reserved for IORING_OP_FUTEX_WAITV.
For cancelations, FUTEX_WAITV does not rely on the futex_unqueue()
return value as we're dealing with multiple futexes. Instead, a separate
per io_uring request atomic is used to claim ownership of the request.
Waiting on N futexes could be done with IORING_OP_FUTEX_WAIT as well,
but that punts a lot of the work to the application:
1) Application would need to submit N IORING_OP_FUTEX_WAIT requests,
rather than just a single IORING_OP_FUTEX_WAITV.
2) When one futex is woken, application would need to cancel the
remaining N-1 requests that didn't trigger.
While this is of course doable, having a single vectored futex wait
makes for much simpler application code.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add support for FUTEX_WAKE/WAIT primitives.
IORING_OP_FUTEX_WAKE is mix of FUTEX_WAKE and FUTEX_WAKE_BITSET, as
it does support passing in a bitset.
Similary, IORING_OP_FUTEX_WAIT is a mix of FUTEX_WAIT and
FUTEX_WAIT_BITSET.
For both of them, they are using the futex2 interface.
FUTEX_WAKE is straight forward, as those can always be done directly from
the io_uring submission without needing async handling. For FUTEX_WAIT,
things are a bit more complicated. If the futex isn't ready, then we
rely on a callback via futex_queue->wake() when someone wakes up the
futex. From that calback, we queue up task_work with the original task,
which will post a CQE and wake it, if necessary.
Cancelations are supported, both from the application point-of-view,
but also to be able to cancel pending waits if the ring exits before
all events have occurred. The return value of futex_unqueue() is used
to gate who wins the potential race between cancelation and futex
wakeups. Whomever gets a 'ret == 1' return from that claims ownership
of the io_uring futex request.
This is just the barebones wait/wake support. PI or REQUEUE support is
not added at this point, unclear if we might look into that later.
Likewise, explicit timeouts are not supported either. It is expected
that users that need timeouts would do so via the usual io_uring
mechanism to do that using linked timeouts.
The SQE format is as follows:
`addr` Address of futex
`fd` futex2(2) FUTEX2_* flags
`futex_flags` io_uring specific command flags. None valid now.
`addr2` Value of futex
`addr3` Mask to wake/wait
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
drm-misc-next for v6.7-rc1:
UAPI Changes:
- drm_file owner is now updated during use, in the case of a drm fd
opened by the display server for a client, the correct owner is
displayed.
- Qaic gains support for the QAIC_DETACH_SLICE_BO ioctl to allow bo
recycling.
Cross-subsystem Changes:
- Disable boot logo for au1200fb, mmpfb and unexport logo helpers.
Only fbcon should manage display of logo.
- Update freescale in MAINTAINERS.
- Add some bridge files to bridge in MAINTAINERS.
- Update gma500 driver repo in MAINTAINERS to point to drm-misc.
Core Changes:
- Move size computations to drm buddy allocator.
- Make drm_atomic_helper_shutdown(NULL) a nop.
- Assorted small fixes in drm_debugfs, DP-MST payload addition error handling.
- Fix DRM_BRIDGE_ATTACH_NO_CONNECTOR handling.
- Handle bad (h/v)sync_end in EDID by clipping to htotal.
- Build GPUVM as a module.
Driver Changes:
- Simple drivers don't need to cache prepared result.
- Call drm_atomic_helper_shutdown() in shutdown/unbind for a whole lot
more drm drivers.
- Assorted small fixes in amdgpu, ssd130x, bridge/it6621, accel/qaic,
nouveau, tc358768.
- Add NV12 for komeda writeback.
- Add arbitration lost event to synopsis/dw-hdmi-cec.
- Speed up s/r in nouveau by not restoring some big bo's.
- Assorted nouveau display rework in preparation for GSP-RM,
especially related to how the modeset sequence works and
the DP sequence in relation to link training.
- Update anx7816 panel.
- Support NVSYNC and NHSYNC in tegra.
- Allow multiple power domains in simple driver.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f1fae5eb-25b8-192a-9a53-215e1184ce81@linux.intel.com
The memory layout of struct vfio_device_ioeventfd is
architecture-dependent due to a u64 field and a struct size that is not
a multiple of 8 bytes:
- On x86_64 the struct size is padded to a multiple of 8 bytes.
- On x32 the struct size is only a multiple of 4 bytes, not 8.
- Other architectures may vary.
Use __aligned_u64 to make memory layout consistent. This reduces the
chance that 32-bit userspace on a 64-bit kernel breakage.
This patch increases the struct size on x32 but this is safe because of
the struct's argsz field. The kernel may grow the struct as long as it
still supports smaller argsz values from userspace (e.g. applications
compiled against older kernel headers).
The code that uses struct vfio_device_ioeventfd already works correctly
when the struct size grows, so only the struct definition needs to be
changed.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20230918205617.1478722-4-stefanha@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The memory layout of struct vfio_device_gfx_plane_info is
architecture-dependent due to a u64 field and a struct size that is not
a multiple of 8 bytes:
- On x86_64 the struct size is padded to a multiple of 8 bytes.
- On x32 the struct size is only a multiple of 4 bytes, not 8.
- Other architectures may vary.
Use __aligned_u64 to make memory layout consistent. This reduces the
chance of 32-bit userspace on a 64-bit kernel breakage.
This patch increases the struct size on x32 but this is safe because of
the struct's argsz field. The kernel may grow the struct as long as it
still supports smaller argsz values from userspace (e.g. applications
compiled against older kernel headers).
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20230918205617.1478722-3-stefanha@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
u64 alignment behaves differently depending on the architecture and so
<uapi/linux/types.h> offers __aligned_u64 to achieve consistent behavior
in kernel<->userspace ABIs.
There are structs in <uapi/linux/vfio.h> that can trivially be updated
to __aligned_u64 because the struct sizes are multiples of 8 bytes.
There is no change in memory layout on any CPU architecture and
therefore this change is safe.
The commits that follow this one handle the trickier cases where
explanation about ABI breakage is necessary.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20230918205617.1478722-2-stefanha@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Pull in locking/core from the tip tree, to get the futex2 dependencies
from Peter Zijlstra.
* 'locking/core' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
locking/ww_mutex/test: Make sure we bail out instead of livelock
locking/ww_mutex/test: Fix potential workqueue corruption
locking/ww_mutex/test: Use prng instead of rng to avoid hangs at bootup
futex: Add sys_futex_requeue()
futex: Add flags2 argument to futex_requeue()
futex: Propagate flags into get_futex_key()
futex: Add sys_futex_wait()
futex: FLAGS_STRICT
futex: Add sys_futex_wake()
futex: Validate futex value against futex size
futex: Flag conversion
futex: Extend the FUTEX2 flags
futex: Clarify FUTEX2 flags
asm-generic: ticket-lock: Optimize arch_spin_value_unlocked()
futex/pi: Fix recursive rt_mutex waiter state
locking/rtmutex: Add a lockdep assert to catch potential nested blocking
locking/rtmutex: Use rt_mutex specific scheduler helpers
sched: Provide rt_mutex specific scheduler helpers
sched: Extract __schedule_loop()
locking/rtmutex: Avoid unconditional slowpath for DEBUG_RT_MUTEXES
...
* for-6.7/io_uring:
io_uring: cancelable uring_cmd
io_uring: retain top 8bits of uring_cmd flags for kernel internal use
io_uring: add IORING_OP_WAITID support
exit: add internal include file with helpers
exit: add kernel_waitid_prepare() helper
exit: move core of do_wait() into helper
exit: abstract out should_wake helper for child_wait_callback()
io_uring/rw: add support for IORING_OP_READ_MULTISHOT
io_uring/rw: mark readv/writev as vectored in the opcode definition
io_uring/rw: split io_read() into a helper
Retain top 8bits of uring_cmd flags for kernel internal use, so that we
can move IORING_URING_CMD_POLLED out of uapi header.
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Create controls for Nuvoton NPCM video driver to support setting
capture mode of Video Capture/Differentiation (VCD) engine and getting
the count of HEXTILE rectangles that is compressed by Encoding
Compression Engine (ECE).
Signed-off-by: Marvin Lin <milkfafa@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add a control base for Nuvoton NPCM driver controls, and reserve 16
controls.
Signed-off-by: Marvin Lin <milkfafa@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add HEXTILE compressed format which is defined in Remote Framebuffer
Protocol (RFC 6143, chapter 7.7.4 Hextile Encoding) and is used by
Encoding Compression Engine (ECE) present on Nuvoton NPCM SoCs.
Signed-off-by: Marvin Lin <milkfafa@gmail.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Until now, fscrypt has always used the filesystem block size as the
granularity of file contents encryption. Two scenarios have come up
where a sub-block granularity of contents encryption would be useful:
1. Inline crypto hardware that only supports a crypto data unit size
that is less than the filesystem block size.
2. Support for direct I/O at a granularity less than the filesystem
block size, for example at the block device's logical block size in
order to match the traditional direct I/O alignment requirement.
(1) first came up with older eMMC inline crypto hardware that only
supports a crypto data unit size of 512 bytes. That specific case
ultimately went away because all systems with that hardware continued
using out of tree code and never actually upgraded to the upstream
inline crypto framework. But, now it's coming back in a new way: some
current UFS controllers only support a data unit size of 4096 bytes, and
there is a proposal to increase the filesystem block size to 16K.
(2) was discussed as a "nice to have" feature, though not essential,
when support for direct I/O on encrypted files was being upstreamed.
Still, the fact that this feature has come up several times does suggest
it would be wise to have available. Therefore, this patch implements it
by using one of the reserved bytes in fscrypt_policy_v2 to allow users
to select a sub-block data unit size. Supported data unit sizes are
powers of 2 between 512 and the filesystem block size, inclusively.
Support is implemented for both the FS-layer and inline crypto cases.
This patch focuses on the basic support for sub-block data units. Some
things are out of scope for this patch but may be addressed later:
- Supporting sub-block data units in combination with
FSCRYPT_POLICY_FLAG_IV_INO_LBLK_64, in most cases. Unfortunately this
combination usually causes data unit indices to exceed 32 bits, and
thus fscrypt_supported_policy() correctly disallows it. The users who
potentially need this combination are using f2fs. To support it, f2fs
would need to provide an option to slightly reduce its max file size.
- Supporting sub-block data units in combination with
FSCRYPT_POLICY_FLAG_IV_INO_LBLK_32. This has the same problem
described above, but also it will need special code to make DUN
wraparound still happen on a FS block boundary.
- Supporting use case (2) mentioned above. The encrypted direct I/O
code will need to stop requiring and assuming FS block alignment.
This won't be hard, but it belongs in a separate patch.
- Supporting this feature on filesystems other than ext4 and f2fs.
(Filesystems declare support for it via their fscrypt_operations.)
On UBIFS, sub-block data units don't make sense because UBIFS encrypts
variable-length blocks as a result of compression. CephFS could
support it, but a bit more work would be needed to make the
fscrypt_*_block_inplace functions play nicely with sub-block data
units. I don't think there's a use case for this on CephFS anyway.
Link: https://lore.kernel.org/r/20230925055451.59499-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Add missed value to kprobe attached through perf link info to
hold the stats of missed kprobe handler execution.
The kprobe's missed counter gets incremented when kprobe handler
is not executed due to another kprobe running on the same cpu.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230920213145.1941596-4-jolsa@kernel.org
The deta angle and deta velocity channels were added in parallel with
color temperature and chromacity so this merge had to assign a
consistent order. I put the color related ones second.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
