Currently preempt_count() is always a non-negative int on all archs
(PREEMPT_NEED_RESCHED archs will mask out the MSB when returning
preempt_count()), hence the checking in __cant_migrate() is in fact just
checking whether preempt_count() is 0 or not. In a future change, we are
going to use all the 32 bits of preempt_count(), which would make
negative int values possible from preempt_count(). Therefore convert the
"> 0" comparison into a zero check to prepare for the future change.
No functional changes are intended.
Signed-off-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260804161447.84806-10-boqun@kernel.org
The semantics of various IRQ disabling guards match what
*_irq_{disable,enable}() provide, i.e. the interrupt disabling is
properly nested, therefore it's OK to switch to use
*_irq_{disable,enable}() primitives.
[boqun: Adjust the user-side changes in do_sched_cfs_*_timer() provided
by Peter and Lyude]
Signed-off-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260804161447.84806-8-boqun@kernel.org
While making changes to the refcounted interrupt patch series, at some
point on my local branch I broke something and ended up writing some kunit
tests for testing refcounted interrupts as a result. So, let's include
these tests now that we have refcounted interrupts.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260804161447.84806-7-boqun@kernel.org
Currently the nested interrupt disabling and enabling is represented by
_irqsave() and _irqrestore() APIs, which are relatively unsafe, for
example:
<interrupts are enabled as beginning>
spin_lock_irqsave(l1, flag1);
spin_lock_irqsave(l2, flag2);
spin_unlock_irqrestore(l1, flags1);
<l2 is still held but interrupts are enabled>
// accesses to interrupt-disable protected data will cause races
This is even easier to trigger with guard facilities:
unsigned long flag2;
scoped_guard(spin_lock_irqsave, l1) {
spin_lock_irqsave(l2, flag2);
}
// l2 locked but interrupts are enabled.
spin_unlock_irqrestore(l2, flag2);
(Hand-to-hand locking critical sections are not uncommon for a
fine-grained lock design)
And because of this unsafety, Rust cannot easily wrap the
interrupt-disabling locks in a safe API, which complicates the design.
To resolve this, introduce a new set of interrupt disabling APIs:
* local_interrupt_disable();
* local_interrupt_enable();
They work like local_irq_save() and local_irq_restore() except that 1)
the outermost local_interrupt_disable() call saves the interrupt state
into a per-CPU variable, so that the outermost local_interrupt_enable()
can restore the state, and 2) a per-CPU counter is added to record the
nest level of these calls, so that interrupts are not accidentally
enabled inside the outermost critical section.
Also add the corresponding spin_lock primitives: spin_lock_irq_disable()
and spin_unlock_irq_enable(), as a result, code as follows:
spin_lock_irq_disable(l1);
spin_lock_irq_disable(l2);
spin_unlock_irq_enable(l1);
// Interrupts are still disabled.
spin_unlock_irq_enable(l2);
doesn't have the issue that interrupts are accidentally enabled.
This also makes the wrapper of interrupt-disabling locks on Rust easier
to design.
[boqun: Apply Peter's feedback and fix spell errors reported by Ingo]
[boqun: Address the duplicate spin_acquire() spotted by sashiko]
Co-developed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Boqun Feng <boqun@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260804182657.87716-1-boqun@kernel.org
queued_spin_unlock() gates its contended_release trace call behind a
static branch, so a NOP sits on the unlock path even while the
tracepoint is disabled. Removing that requires replacing the unlock
implementation only while contended_release is enabled, which needs a
callback when the tracepoint is toggled.
Convert contended_release to TRACE_EVENT_FN() and add weak no-op
arch_contended_release_trace_reg()/arch_contended_release_trace_unreg()
hooks.
The default hooks are empty, so this is a no-op until an architecture
overrides them.
No functional change intended.
Signed-off-by: Dmitry Ilvokhin <d@ilvokhin.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juergen Gross <jgross@suse.com>
Link: https://patch.msgid.link/1c2fcccfb584c075c02890c484f22c76a1948bf1.1785778551.git.d@ilvokhin.com
Unlike mutex and rw_semaphore, qspinlock has no owner field, so "perf
lock contention --lock-owner" cannot attribute a contended spinlock to
its holder. The waiter-side contention_begin event records that a
spinlock is contended, but not by whom. Firing contended_release in the
holder's context at unlock is the only way to capture the holder of a
contended spinlock.
Combine the contention check, trace call and release in an out-of-line
queued_spin_release_traced() so the compiler need not preserve the lock
pointer in a callee-saved register across the call.
The check in queued_spin_unlock() is paid on every unlock, even while
the tracepoint is disabled: a static-branch NOP on x86_64, and a few
more instructions to manage a stack frame elsewhere. Gate it behind
CONFIG_QUEUED_SPINLOCKS_TRACE_CONTENDED_RELEASE (default n) so nobody
pays for a tracepoint they do not use. Sleeping locks fire
contended_release regardless.
On x86 this generic path is used only with PARAVIRT_SPINLOCKS=n (e.g.
defconfig). PARAVIRT_SPINLOCKS=y kernels keep the paravirt static_call
unlock and are wired up separately.
All below are with the QUEUED_SPINLOCKS_TRACE_CONTENDED_RELEASE option
enabled.
_raw_spin_unlock(), x86_64 defconfig, GCC 11, tracepoint compiled in but
disabled. The unlock is the single 'movb'. The only instruction added to
the executed path is the 2-byte static-branch NOP. The CALL to the
traced helper and the JMP back are emitted out of line and are reached
only once the static branch is patched on:
endbr64 ; 4 bytes
xchg %ax,%ax ; 2 static-branch NOP
; (added)
movb $0x0,(%rdi) ; 3 unlock (single store)
A: decl %gs:__preempt_count ; 7
je B ; 2
jmp __x86_return_thunk ; 5
call queued_spin_release_traced ; 5 out of line, reached
; only when the
; tracepoint is on
jmp A ; 2 (added)
B: call __SCT__preempt_schedule ; 5
jmp __x86_return_thunk ; 5
Baseline is the same stream without the NOP and the out-of-line
CALL/JMP: 31 bytes vs 40 (+9 bytes).
Binary size impact on x86_64, defconfig: +680 bytes (+0.00%), since all
standard configs out-of-line unlock. Architectures with inlined unlock
(s390 (always), csky and loongarch (both when !PREEMPTION)) will see a
bigger increase in binary size.
On the same path (x86_64, PARAVIRT_SPINLOCKS=n) with the tracepoint
disabled, a _raw_spin_unlock()-heavy nginx workload [1] shows no
measurable difference between baseline and patched kernels in
throughput, latency, cycles, instructions, IPC, or L1 instruction-cache
misses (kernel and total): all deltas stay within run-to-run noise.
Unlike x86, on arm64 the frame setup code (STP, MOV and LDP) lands on
the executed path in addition to static-branch NOP. Binary size impact
on arm64, defconfig: +932 bytes (+0.00%).
The _raw_spin_unlock()-heavy nginx workload reflects the larger hot
path: L1 instruction-cache misses rise ~1.4% (kernel and total) and
instruction count ~0.4%, consistent with the per-unlock frame.
cpu_cycles, throughput and latency show no measurable change and are
within run-to-run noise.
Architectures with fully custom qspinlock implementations (e.g.
PowerPC) are not covered by this change.
[1]: https://lore.kernel.org/all/aiphFXe_TPNPxZ_n@shell.ilvokhin.com/
Signed-off-by: Dmitry Ilvokhin <d@ilvokhin.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juergen Gross <jgross@suse.com>
Link: https://patch.msgid.link/0d998e22a0c595f670cfc6725bb683323aced5cb.1785778551.git.d@ilvokhin.com
futex_private_hash_put() drops the reference to fph before evaluating
fph->mm for wake_up_var(). futex_ref_put() enables preemption again before
returning. If that put drops the final reference and the task is preempted,
another task can pivot to the replacement hash and free the old hash after
an RCU grace period. The first task then reads fph->mm from the freed
allocation when it resumes.
KASAN reports a slab-use-after-free in futex_private_hash_put(), with the
read at offset 24 in a freed kmalloc-512 allocation. The allocation and
free stacks point to futex_hash_allocate() and the RCU free path,
respectively.
Load the mm pointer while the fph reference is still held and pass the
saved value to wake_up_var(). wake_up_var() uses the pointer as a waitqueue
key and does not dereference the mm through it.
Fixes: bd54df5ea7 ("futex: Allow to resize the private local hash")
Signed-off-by: Felix Hoffmann <f3lix.dev@gmx.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260731155024.1150011-1-f3lix.dev@gmx.de
KCSAN reports a data race between readers_active_check() and a
concurrently executing reader:
BUG: KCSAN: data-race in readers_active_check / percpu_down_write
race at unknown origin, with read to 0xffff9f3eb5bf5f30 of 4 bytes
by task 1271 on cpu 14:
readers_active_check+0x...
percpu_down_write+0x152/0x1f0
value changed: 0xfffffff9 -> 0xfffffff8
readers_active_check() calls per_cpu_sum(*sem->read_count), which
iterates over all CPUs and reads each CPU's per-CPU read_count
variable. Concurrently, a reader on a remote CPU is modifying its own
CPU's read_count via this_cpu_inc() / this_cpu_dec() as it enters and
exits the critical section. These are plain reads and writes to the
same per-CPU storage, hence KCSAN flags a data race.
This race is benign. readers_active_check() is called from the
percpu_down_write() wait loop (rcuwait_wait_event) after sem->block is
already set. At this point:
- New readers must immediately back out (they see block set, decrement
their counter, and wake the writer), so counters can only decrease.
- If the sum catches a reader's increment before its decrement,
readers_active_check() sees a non-zero sum and returns false. The
writer merely iterates the wait loop again -- a harmless retry.
- A false zero (observing sum == 0 while a reader is still active)
cannot happen: per_cpu_sum() reads each CPU's counter, and each
per-CPU int read is atomic on all architectures, so an active
reader's counter is always seen as non-zero.
Annotate the read with data_race() to suppress the KCSAN warning and
document the intentional nature of this unlocked access.
Signed-off-by: Sun Shaojie <sunshaojie@kylinos.cn>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260623104132.505117-1-sunshaojie@kylinos.cn
register_lock_class() can return NULL when the lock class pool is
exhausted, graph_lock() fails, or key validation fails. However,
__lock_set_class() uses the return value directly in pointer arithmetic
without a NULL check:
class = register_lock_class(lock, subclass, 0);
hlock->class_idx = class - lock_classes;
If class is NULL, this computes a wild offset that corrupts
hlock->class_idx. The subsequent reacquire_held_locks() call will
invoke hlock_class() with this corrupted index, leading to a NULL or
out-of-bounds pointer dereference.
Add the missing NULL check, consistent with how __lock_acquire() already
handles this case at the same call site.
Fixes: 64aa348edc ("lockdep: lock_set_subclass - reset a held lock's subclass")
Signed-off-by: Naveen Kumar Chaudhary <naveen.osdev@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Waiman Long <longman@redhat.com>
Reviewed-by: Dmitry Ilvokhin <d@ilvokhin.com>
Link: https://patch.msgid.link/h2kfw43n4527x6mgi2lwpz2rieqnfzgictpv4wr5nyfjkc47co@2r5vz4uz44db
The futex address must be naturally aligned and this is checked via
"address % size" where `address' is the supplied address and `size' is
the expected size of futex. It is guaranteed that `size' is power of two
but the compiler does not see it and creates here a `div' operation
(x86, arm, gcc-15).
We can take advantage of the pow2 property and rewrite it as
"address & (size-1)".
As per testing, the command
|perf bench futex hash -f 1 -b 16384 -t 1 -r 30
improved from
| [thread 0] futex: 0x5619f931f740 [ 7001583 ops/sec ]
to
| [thread 0] futex: 0x55da173e5740 [ 7376137 ops/sec ]
or by 5.3%
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260701161736.xYYizA0e@linutronix.de
Runtime constify the read-only after init data __futex_shift(shift_32),
__futex_mask(mask_32), and __futex_queues(ptr) used in __futex_hash()
hot path to avoid referencing global variable.
This also allows __futex_queues to be allocated dynamically to
"nr_node_ids" slots instead of reserving config dependent MAX_NUMNODES
(1 << CONFIG_NODES_SHIFT) worth of slots upfront.
Runtime constants are initialized before their first access and
runtime_const_init() provides necessary barrier to ensure subsequent
accesses are not reordered against their initialization.
No functional changes intended.
perf bench futex on a 3rd Gen EPYC (2 x 64C/128T):
+----------------+-----------+-----------+-----------+--------------+
| Benchmark | Kernel 1 | Kernel 2 | Unit | % Improvement|
| | (avg/5) | (avg/5) | | (K2 vs K1) |
+----------------+-----------+-----------+-----------+--------------+
| Wake-parallel | 0.01614 | 0.00456 | ms | +71.75% |
| Requeue | 0.26394 | 0.24644 | ms | +6.63% |
| Lock-pi | 34.0 | 57.2 | ops/sec | +68.24% |
+----------------+-----------+-----------+-----------+--------------+
Performance testing on a 144-thread Intel(R) Xeon(R) CPU E7-8890 v3 (4 NUMA nodes):
+-------------------------------------------------------------+
| perf bench futex hash -b 0 |
+----------------------+------------+------------+------------+
| Configuration | As-is | Patched | Delta |
+----------------------+------------+------------+------------+
| 1 thread, 1 futex | 6,449,632 | 6,532,004 | +1.28% |
| 144 threads, 1024 fx | 2,111,486 | 2,139,685 | +1.34% |
+----------------------+------------+------------+------------+i
[ prateek: Dynamically allocate __futex_queues, mark the global data
__ro_after_init since they are constified after futex_init(). ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> # MAX_NUMNODES bloat
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Charlie Jenkins <thecharlesjenkins@gmail.com>
Tested-by: Charlie Jenkins <thecharlesjenkins@gmail.com>
Link: https://patch.msgid.link/20260227161841.GH606826@noisy.programming.kicks-ass.net
Link: https://patch.msgid.link/20260728052540.4728-9-kprateek.nayak@amd.com
Background:
==========
Currently lockdep does not print out the held locks of non-current
tasks that are running on some other CPU, due to the fact that
the held locks array is in flux and may be unreliable to print.
Syzkaller on the other hand found it that the analysis of locking
bugs is easier if we print this information too, because the
more locking information the merrier. In particular races are
bound to have multiple tasks running on different CPUs, and
the exclusion of their held locks information is unnecessarily
limiting.
So while it's still true that printing out their held locks
array is racy, it's not as bad as it seems.
There's 16 internal callers to lockdep_print_held_locks():
- 14 callers call it with the current task, which should be
safe out of box.
- 1 caller, debug_show_all_locks(), calls it with RCU held,
which should guarantee that 'p' cannot go away under us.
- 1 caller, debug_show_held_locks(), exposes the internal API
with the constraint that it should only be called by drivers
or platform code if the task isn't actively running - we can
assume that if it nevertheless does, it will be Their Problem™.
As for held locks being changed from under debug_show_held_locks(),
while the task cannot go away, so the held-locks array itself is
safe (although potentially non-stable), AFAICS the worst-case race
can be garbage printed out by print_lock(), not any actual crashes.
In particular:
unsigned int class_idx = hlock->class_idx;
may be stale (belong to a lock that already got released on another
CPU), but it should still be a valid class index bound by
MAX_LOCKDEP_KEYS, and thus the lock_classes_in_use bitmap use
should be safe.
The other two accesses are ::acquire_ip and ::instance:
printk(KERN_CONT "%px", hlock->instance);
print_lock_name(hlock, lock);
printk(KERN_CONT ", at: %pS\n", (void *)hlock->acquire_ip);
But both are printed out as pointers, so no risk of dereference
of a dangling pointer. We may print a garbage pointer.
Also note that the check itself doesn't protect debug_show_held_locks()
from printing garbage, as there's nothing that keeps a task from
becoming runnable a nanosecond after we've run the task_is_running()
check. In fact I'd argue that it's better to make this function
*more* racy, for the simple robustness reason that we absolutely
do not want it to crash even in the racy case.
TL;DR: it should be fine to print the held locks of running
tasks too, as long as we print out the information as well
that a task is running, so that users are aware of any
racy output.
Implementation:
==============
Implement that change.
Also re-flow the function and streamline the printout into
a single statement for all cases, which changes
the 'no locks held by' / '%d lock[s] held by' phrasing that had a
dependency on English spelling of plurals, to a uniform:
locks held by bash/1234: %d
Which spells correctly for 0, 1 and higher values, and should also
be easier to parse both for humans and for scripts.
Finally, print out the last CPU a task has ran on. This is very
useful information for races and for locking bugs in particular.
This basically extends the 'on CPU#%d' message we print for
running tasks to all tasks we print.
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Suggested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Boqun Feng <boqun@kernel.org>
Cc: Gary Guo <gary@garyguo.net>
Cc: Mark Brown <broonie@kernel.org>
Cc: Theodore Tso <tytso@mit.edu>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Waiman Long <longman@redhat.com>
Link: https://patch.msgid.link/akoeSIQGwqd9cZwd@gmail.com
Pull perf events fixes from Ingo Molnar:
- Fix a perf_event_attr::remove_on_exec bug for group events
(Taeyang Lee)
- Fix uprobes CALL emulation interaction with shadow stacks, and
add a testcase for this (David Windsor)
- Fix uprobes unregister bug (Jiri Olsa)
* tag 'perf-urgent-2026-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
uprobes/x86: Use proper mm_struct in __in_uprobe_trampoline
selftests/x86: Add shadow stack uprobe CALL test
x86/uprobes: Keep shadow stack in sync for emulated CALLs
perf/core: Detach event groups during remove_on_exec
Pull futex fix from Ingo Molnar:
- Fix a futex-requeue deadlock detection regression (Thomas Gleixner)
* tag 'locking-urgent-2026-07-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex/requeue: Revert "Prevent NULL pointer dereference in remove_waiter() on self-deadlock""
Pull BPF fixes from Daniel Borkmann:
- Initialize task local storage before fork bails out to free the task
(Jann Horn)
- Fix insn_aux_data leak on verifier error path (KaFai Wan)
- Reject BPF inode storage map creation when BPF LSM is uninitialized
(Matt Bobrowski)
- Mask pseudo pointer values in verifier logs when pointer leaks are
not allowed (Nuoqi Gui)
- Harden BPF JIT against spraying via IBPB flush (Pawan Gupta)
- Reject a skb-modifying SK_SKB stream parser since the latter is only
meant to measure the next message (Sechang Lim)
- Fix bpf_refcount_acquire to reject refcounted allocation arguments
with a non-zero fixed offset (Yiyang Chen)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Prefer dirty packs for eBPF allocations
bpf: Prefer packs that won't trigger an IBPB flush on allocation
bpf: Skip redundant IBPB in pack allocator
bpf: Restrict JIT predictor flush to cBPF
x86/bugs: Enable IBPB flush on BPF JIT allocation
bpf: Support for hardening against JIT spraying
bpf: Reject BPF_MAP_TYPE_INODE_STORAGE creation if BPF LSM is uninitialized
bpf,fork: wipe ->bpf_storage before bailouts that access it
bpf: Fix insn_aux_data leak on verifier err_free_env path
selftests/bpf: Cover pseudo-BTF ksym log masking
bpf: Mask pseudo pointer values in verifier logs
selftests/bpf: Cover refcount acquire node offsets
bpf: Reject offset refcount acquire arguments
selftests/bpf: test rejection of a packet-modifying SK_SKB stream parser
bpf, sockmap: reject a packet-modifying SK_SKB stream parser
selftests/bpf: don't modify the skb in the strparser parser prog
The commit cited below should not have been merged. It attemted to fix an
existing problem ansd thereby introduced new problems by keeping the
pi_state in state Q_REQUEUE_PI_IN_PROGRESS and leaking it.
Based on the commit description the intention was to handle the case
when task_blocks_on_rt_mutex() returns -EDEADLK and the following
remove_waiter() dereferences the NULL pointer in waiter->task.
That is already handled by Davidlohr in commit 40a25d59e8
("locking/rtmutex: Skip remove_waiter() when waiter is not enqueued") and
requires no further acting.
Revert the commit breaking the "waiter == owner" case again.
Fixes: 74e144274a ("futex/requeue: Prevent NULL pointer dereference in remove_waiter() on self-deadlock")
Reported-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260701131150.0Ijhq4Dw@linutronix.de
Closes: https://lore.kernel.org/all/20260629020049.2082397-1-michael.bommarito@gmail.com
perf_event_remove_on_exec() removes events by calling
perf_event_exit_event(). For top-level events, this removes the event from
the context with DETACH_EXIT only.
This can leave inconsistent group state when a removed event is a group
leader and the group contains siblings without remove_on_exec. If the group
was active, the surviving siblings can remain active and attached to the
removed leader's sibling list, but are no longer represented by a valid
group leader on the PMU context active lists.
A later close of the removed leader uses DETACH_GROUP and can promote the
still-active siblings from this stale group state. The next schedule-in can
then add an already-linked active_list entry again, corrupting the PMU
context active list.
With DEBUG_LIST enabled, this is caught as a list_add double-add in
merge_sched_in().
Fix this by detaching group relationships when remove_on_exec removes an
event. This preserves the existing task-exit and revoke behavior, while
ensuring surviving siblings are ungrouped before the removed event leaves
the context.
Fixes: 2e498d0a74 ("perf: Add support for event removal on exec")
Signed-off-by: Taeyang Lee <0wn@theori.io>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/ai65GgZcC0LAlWLG@Taeyangs-MacBook-Pro.local
The pack allocator only flushes predictors when reusing a dirty pack for
cBPF, eBPF allocations never trigger a flush. Currently, eBPF picks the
first free pack, which could be a clean pack. As an optimization, leaving
a clean pack for cBPF can avoid flushes.
Prefer dirty packs for eBPF and keep clean packs free for cBPF. This
mirrors the existing cBPF preference for clean packs: each program kind
prefers the pack that avoids an extra flush, and falls back to the other
kind only when no preferred pack has room. eBPF reuse of a dirty pack is
harmless since eBPF being privileged does not flush.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Currently BPF pack allocator picks the chunks from the first available
pack. While this is okay, it naturally leads to more frequent flushes
when there are multiple packs in the system that weren't used since the
last flush.
As an optimization prefer allocating the new programs from packs that
are unused since last flush. When all packs are dirty, allocation forces
a flush and marks all packs clean.
Below are some future optimizations ideas:
1. Currently, the "dirty" tracking is only done at the pack-level.
Flush frequency can further be reduced with chunk-level tracking.
This requires a new bitmap per-pack to track the dirty state.
2. IBPB flush is done on all CPUs, even if only a single CPU ran the
BPF program. On a system with hundreds of CPUs this could be a
major bottleneck forcing hundreds of IPIs to deliver the flush.
The solution is to track the CPUs where a BPF program ran, and
issue IBPB only on those CPUs.
3. Avoid IBPB when flush is already done at other sources (e.g.
context switch).
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
bpf_prog_pack_alloc() issues IBPB on all CPUs on every cBPF allocation,
even when reusing chunks from an existing pack where no new memory was
touched since the last IBPB.
Since IBPB on all CPUs is heavy, Dave Hansen suggested to track allocation
since last IBPB, and only issue IBPB at reuse for the chunks that have not
seen an IBPB since they were last freed.
Track per-pack whether an IBPB is needed via arch_flush_needed. Set it when
allocating a chunk, reset on IBPB flush. On reuse, conditionally issue the
flush. Since IBPB invalidates all BTB entries, clear the flag on all packs
after flushing.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Currently predictor flush on memory reuse is done for all BPF JIT
allocations, but only cBPF programs can be loaded by an unprivileged user.
eBPF is privileged by default, and flushing predictors for all CPUs on
every eBPF reuse penalizes the common case for no security benefit.
eBPF allocations can be frequent on busy systems, only flush predictors
for cBPF programs. Trampoline and dispatcher allocations also skip the
flush as they are eBPF-only.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The BPF JIT allocator packs many small programs into larger executable
allocations and reuses space within those allocations as programs are
loaded and freed. When fresh code is written into space that a previous
program occupied, an indirect jump into the new program can reuse a branch
prediction left behind by the old one.
Flush the indirect branch predictors before reusing JIT memory so that
indirect jumps into a newly written program don't reuse predictions from an
old program that occupied the same space.
Introduce bpf_arch_pred_flush_enabled static key and bpf_arch_pred_flush
static call for flushing the branch predictors on JIT memory reuse.
Architectures that need a flush, can update it to a predictor flush
function. By default, its a NOP and does not emit any CALL.
Allocations larger than a pack are not covered by this flush. That is safe
because cBPF programs (the unprivileged attack surface) are bounded well
below a pack size. Issue a warning if this assumption is ever violated
while the flush is active.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Pull probes fixes from Masami Hiramatsu:
"fprobe fixes and spelling typos:
- Fix NULL pointer dereference in fprobe_fgraph_entry(). Prevent
general protection faults by checking shadow-stack reservation
bounds. Skip mid-flight registered fprobes that were not counted
during sizing.
eprobe: fix string pointer extraction
- Correct the casting of string pointers read from the ringbuffer to
prevent truncation of base event pointer variables when
dereferencing FILTER_PTR_STRING fields.
tracing/probes: clean up argument parsing and BTF helper logic
- Make the $ prefix mandatory for comm access: Require the $ prefix
for special fetcharg variables like $comm and $COMM, preventing
naming conflicts with regular BTF-based event fields.
- Fix double addition of offset for @+FOFFSET: Clear the temporary
offset variable after setting the FETCH_OP_FOFFS instruction to
avoid applying the offset multiple times.
- Remove WARN_ON_ONCE from parse_btf_arg: Prevent triggering a kernel
warning via user-space input when creating a kprobe event on a raw
address.
- Fix typo in a log message: Correct a spelling error ("$-valiable")
in trace probe log messages.
samples/trace_events: improve error checking
- Validate the thread pointer returned from kthread_run() in the
trace events sample code to properly handle thread creation
failures"
* tag 'probes-fixes-v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/probes: Make the $ prefix mandatory for comm access
tracing/fprobe: Fix NULL pointer dereference in fprobe_fgraph_entry()
tracing/probes: Fix double addition of offset for @+FOFFSET
tracing: eprobe: read the complete FILTER_PTR_STRING pointer
tracing/events: Fix to check the simple_tsk_fn creation
tracing/probes: Remove WARN_ON_ONCE from parse_btf_arg
tracing: probes: fix typo in a log message
fprobe_fgraph_entry() sizes a shadow-stack reservation in one walk of
the per-ip fprobe list and fills it in a second walk, both under
rcu_read_lock() only. A fprobe registered on an already-live ip can
become visible between the two walks, so the fill walk processes an
exit_handler the sizing walk did not count and used runs past
reserved_words. If the sizing walk counted nothing, fgraph_data is NULL
and the first write_fprobe_header() faults:
Oops: general protection fault, probably for non-canonical address ...
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:fprobe_fgraph_entry+0xa38/0xf10 kernel/trace/fprobe.c:167
Call Trace:
<TASK>
function_graph_enter_regs+0x44c/0xa10 kernel/trace/fgraph.c:677
ftrace_graph_func+0xc5/0x140 arch/x86/kernel/ftrace.c:671
__kernel_text_address+0x9/0x40 kernel/extable.c:78
arch_stack_walk+0x117/0x170 arch/x86/kernel/stacktrace.c:26
kmem_cache_free+0x188/0x580 mm/slub.c:6378
tcp_data_queue+0x18d/0x6550 net/ipv4/tcp_input.c:5590
[...]
</TASK>
The list cannot be frozen across the two walks, so skip a node that does
not fit the reservation and count it as missed.
Link: https://lore.kernel.org/all/20260619184425.3824774-1-rhkrqnwk98@gmail.com/
Fixes: 4346ba1604 ("fprobe: Rewrite fprobe on function-graph tracer")
Signed-off-by: Sechang Lim <rhkrqnwk98@gmail.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
For a char * element in an event, the FILTER_PTR_STRING filter type is
used. When the event occurs, a pointer is stored in the ringbuffer.
If an eprobe references such a char * element of a "base event", the
stored pointer is truncated when it's read from the ringbuffer.
$ cd /sys/kernel/tracing
$ echo 'e rcu.rcu_utilization $s:x64 $s:string' > dynamic_events
$ echo 1 > tracing_on
$ echo 1 > events/eprobes/enable
$ sleep 1
$ echo 0 > events/eprobes/enable
$ cat trace
<idle>-0 ...: (rcu.rcu_utilization) arg1=0x4f arg2=(fault)
<idle>-0 ...: (rcu.rcu_utilization) arg1=0x2 arg2=(fault)
The problem is in get_event_field
val = (unsigned long)(*(char *)addr);
addr points to the position in the ringbuffer where the pointer was
stored. The assignment reads only the lowest byte of the pointer.
Fix the cast to read the whole pointer. The output of the test above
is now
<idle>-0 ... arg1=0xffffffff81c7d3f3 arg2="Start scheduler-tick"
<idle>-0 ... arg1=0xffffffff81c57340 arg2="End scheduler-tick"
Link: https://lore.kernel.org/all/20260620145339.3234726-1-martin@kaiser.cx/
Fixes: f04dec9346 ("tracing/eprobes: Fix reading of string fields")
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
When CONFIG_BPF_LSM=y is set, BPF inode storage maps
(BPF_MAP_TYPE_INODE_STORAGE) are compiled into the kernel. However,
if the BPF LSM is not explicitly enabled at boot time (e.g. omitted
from the "lsm=" boot parameter), lsm_prepare() is never executed for
the BPF LSM.
Consequently, the BPF inode security blob offset
(bpf_lsm_blob_sizes.lbs_inode) is never initialized and remains at
its default compiled size of 8 bytes instead of being updated to a
valid offset past the reserved struct rcu_head (typically 16 bytes
or more).
When a privileged user creates and updates a BPF_MAP_TYPE_INODE_STORAGE
map, bpf_inode() evaluates inode->i_security + 8. This erroneously
aliases the struct rcu_head.func callback pointer at the beginning
of the inode->i_security blob. During subsequent map element cleanup
or inode destruction, writing NULL to owner_storage clears the queued
RCU callback pointer. When rcu_do_batch() later executes the queued
callback, it attempts an instruction fetch at address 0x0, triggering
an immediate kernel panic.
Fix this by introducing a global bpf_lsm_initialized boolean flag
marked with __ro_after_init. Set this flag to true inside bpf_lsm_init()
when the LSM framework successfully registers the BPF LSM. Gate map
allocation in inode_storage_map_alloc() on this flag, returning
-EOPNOTSUPP if the BPF LSM is in turn uninitialized.
This fail-fast approach prevents userspace from allocating inode
storage maps when the supporting BPF LSM infrastructure is absent,
avoiding zombie map states.
Fixes: 8ea636848a ("bpf: Implement bpf_local_storage for inodes")
Reported-by: oxsignal <awo@kakao.com>
Signed-off-by: Matt Bobrowski <mattbobrowski@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Link: https://lore.kernel.org/bpf/20260628201103.3624525-1-mattbobrowski@google.com
Currently, copy_process() can bail out to free_task() before p->bpf_storage
has been initialized, with this call graph (shown here for the
!CONFIG_MEMCG case):
copy_process
dup_task_struct
arch_dup_task_struct
[copies the entire task_struct, including ->bpf_storage member]
[RLIMIT_NPROC check fails]
delayed_free_task
free_task
bpf_task_storage_free
rcu_dereference(task->bpf_storage)
bpf_local_storage_destroy
In this case, the nascent task's ->bpf_storage member that
bpf_local_storage_destroy() operates on is a plain copy of the parent's
->bpf_storage pointer, not a real initialized pointer.
This leads to badness (kernel hangs, UAF).
This is reachable as long as the process calling fork() has been inserted
into a task storage map.
Cc: stable@kernel.org
Fixes: a10787e6d5 ("bpf: Enable task local storage for tracing programs")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Pull power management fixes from Rafael Wysocki:
"These fix the schedutil cpufreq governor and drop a bogus warning
from the cpuidle core:
- Remove a misguided warning along with an inaccurate comment
next to it from the cpuidle core (Rafael Wysocki)
- Clear need_freq_update as appropriate in the .adjust_perf()
path of the schedutil cpufreq governor to avoid calling
cpufreq_driver_adjust_perf() unnecessarily on every scheduler
utilization update (Zhongqiu Han)"
* tag 'pm-7.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle: Allow exit latency to exceed target residency
cpufreq: schedutil: Fix uncleared need_freq_update on the .adjust_perf() path
When bpf_check() allocates env->insn_aux_data successfully but later
fails to allocate env->succ, it jumps directly to err_free_env.
The existing vfree(env->insn_aux_data) sits before the err_free_env
label, so that direct jump bypasses it and leaks insn_aux_data.
Move vfree(env->insn_aux_data) into err_free_env so all early and late
exit paths release it consistently.
Fixes: 2f69c56854 ("bpf: make bpf_insn_successors to return a pointer")
Signed-off-by: KaFai Wan <kafai.wan@linux.dev>
Reviewed-by: Anton Protopopov <a.s.protopopov@gmail.com>
Link: https://lore.kernel.org/r/20260624123536.114757-1-kafai.wan@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
print_bpf_insn() masks ldimm64 immediates for pointer-bearing pseudo
sources when pointer leaks are not allowed, but the mask only covers
BPF_PSEUDO_MAP_FD and BPF_PSEUDO_MAP_VALUE.
BPF_PSEUDO_MAP_IDX, BPF_PSEUDO_MAP_IDX_VALUE, and BPF_PSEUDO_BTF_ID can
also be resolved to kernel pointer values before the verifier log prints
the instruction. Include them in the existing pointer classification so
the log prints 0x0 instead of the rewritten address.
Fixes: 4976b718c3 ("bpf: Introduce pseudo_btf_id")
Fixes: 387544bfa2 ("bpf: Introduce fd_idx")
Signed-off-by: Nuoqi Gui <gnq25@mails.tsinghua.edu.cn>
Link: https://lore.kernel.org/r/20260623-f01-13-pseudo-btf-id-cap-bpf-v2-1-a190ebb8f3e2@mails.tsinghua.edu.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
bpf_refcount_acquire() increments the refcount at the caller-supplied
pointer plus the refcount field offset, then returns the caller-supplied
pointer unchanged.
The verifier records the return value as a base pointer to the refcounted
object.
bpf_list_pop_front() and bpf_rbtree_remove() can return embedded
graph-node pointers as PTR_TO_BTF_ID | MEM_ALLOC with a fixed offset equal
to the node field offset. Passing such a pointer directly to
bpf_refcount_acquire() currently passes the refcounted-kptr type check.
That makes the runtime operation start from base + node_off while the
verifier models the returned pointer as the object base.
Require refcount-acquire arguments to have zero fixed offset by carrying
the requirement through check_func_arg_reg_off() to __check_ptr_off_reg().
Programs can still acquire a refcount from a graph-node-derived pointer
after normalizing it with container_of().
Fixes: 7c50b1cb76 ("bpf: Add bpf_refcount_acquire kfunc")
Signed-off-by: Yiyang Chen <chenyy23@mails.tsinghua.edu.cn>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/2f894647f56f71838fdddeb97a3e057ed35ea92e.1782192383.git.chenyy23@mails.tsinghua.edu.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull block fixes from Jens Axboe:
- blk-cgroup locking rework and fixes:
- fix a use-after-free in __blkcg_rstat_flush()
- defer freeing policy data until after an RCU grace period
- defer the blkcg css_put until the blkg is unlinked from
the queue
- unwind the queue_lock nesting under RCU / blkcg->lock
across the lookup, create, associate and destroy paths
- NVMe fixes via Keith:
- Fix a crash and memory leak during invalid cdev teardown,
and related cdev cleanups (Maurizio, John)
- nvmet fixes: handle TCP_CLOSING in the tcp state_change
handler, reject short AUTH_RECEIVE buffers, handle inline
data with a nonzero offset in rdma, fix an sq refcount leak,
and allocate ana_state with the port (Maurizio, Michael,
Bryam, Wentao, Rosen)
- nvme-fc fix to not cancel requests on an IO target before it
is initialized (Mohamed)
- nvme-apple fix to prevent shared tags across queues on Apple
A11 (Nick)
- Various smaller fixes and cleanups (John)
- MD fixes via Yu Kuai:
- raid1/raid10 fixes for writes_pending and barrier reference
leaks on write and discard failures, plus REQ_NOWAIT handling
fixes (Abd-Alrhman)
- raid5 discard accounting and validation, and a batch of fixes
for stripe batch races (Yu Kuai, Chen)
- Protect raid1 head_position during read balancing (Chen)
- block bio-integrity fixes: correct an error injection static key
decrement, fix GFP flag confusion in bio_integrity_alloc_buf(), and
handle REQ_OP_ZONE_APPEND in __bio_integrity_action() (Christoph)
- Fixes for bio_iov_iter_bounce_write(): revert the iov_iter after a
short copy, and respect the iov_iter nofault flag (Qu)
- Invalidate the cached plug timestamp after a task switch, and clear
PF_BLOCK_TS in copy_process() (Usama)
- Fix the IORING_URING_CMD_REISSUE flags check in blkdev_uring_cmd()
(Yitang)
- Remove a redundant plug in __submit_bio() (Wen)
- Don't warn when reclassifying a busy socket lock in nbd (Deepanshu)
* tag 'block-7.2-20260625' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (45 commits)
block: handle REQ_OP_ZONE_APPEND in __bio_integrity_action
block: fix GFP_ flags confusion in bio_integrity_alloc_buf
block, bfq: don't grab queue_lock to initialize bfq
mm/page_io: don't nest queue_lock under rcu in bio_associate_blkg_from_page()
blk-cgroup: don't nest queue_lock under blkcg->lock in blkcg_destroy_blkgs()
blk-cgroup: don't nest queue_lock under rcu in bio_associate_blkg()
blk-cgroup: don't nest queue_lock under rcu in blkg_lookup_create()
blk-cgroup: don't nest queue_lock under rcu in blkcg_print_blkgs()
blk-cgroup: delay freeing policy data after rcu grace period
blk-cgroup: protect iterating blkgs with blkcg->lock in blkcg_print_stat()
md/raid5: avoid R5_Overlap races while breaking stripe batches
md/raid5: use stripe state snapshot in break_stripe_batch_list()
blk-cgroup: defer blkcg css_put until blkg is unlinked from queue
blk-cgroup: fix UAF in __blkcg_rstat_flush()
block, bfq: protect async queue reset with blkcg locks
nbd: don't warn when reclassifying a busy socket lock
block: fix incorrect error injection static key decrement
md/raid5: let stripe batch bm_seq comparison wrap-safe
md/raid1: protect head_position for read balance
md/raid1: free r1_bio when REQ_NOWAIT is set and read would block on retry
...
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Remove MPS/MRRS Kconfig settings (CONFIG_PCIE_BUS_*) that worked
around a WiFi device defect; use a quirk or boot-time
"pci=pcie_bus_tune_*" kernel parameter instead (Bjorn Helgaas)
- Always lift 2.5GT/s restriction in PCIe failed link retraining to
avoid clamping a link to 2.5GT/s after hot-plug changes the device
(Maciej W. Rozycki)
- Request bus reassignment when not probe-only to fix an enumeration
regression on Marvell CN106XX and possibly other DT-based systems
(Ratheesh Kannoth)
- Fix procfs race between pci_proc_init() and pci_bus_add_device()
that resulted in 'proc_dir_entry ... already registered' warnings
and pointer corruption (Krzysztof Wilczyński)
- Fix sysfs race that causes 'duplicate filename' warnings and boot
panics by converting PCI resource files to static attributes
(Krzysztof Wilczyński)
- Expose sysfs 'resourceN_resize' attributes only on platforms with
PCI mmap (Krzysztof Wilczyński)
- Require CAP_SYS_ADMIN to write to sysfs 'resourceN_resize'
attributes (Krzysztof Wilczyński)
- Add security_locked_down(LOCKDOWN_PCI_ACCESS) to alpha PCI resource
mmap path to match the generic path (Krzysztof Wilczyński)
- Use kstrtobool() to parse the 'rom' attribute input to avoid the
unexpected behavior of enabling the ROM when writing '0' with no
trailing newline (Krzysztof Wilczyński)
Resource management:
- Improve resource claim logging for debuggability (Ilpo Järvinen)
- Clean up several uses of const parameters (Ilpo Järvinen)
- Check option ROM header signatures and lengths before accessing to
avoid page faults and alignment faults (Guixin Liu)
ASPM:
- Don't reconfigure ASPM when entering low-power D-state; only do it
when returning back to D0 (Carlos Bilbao)
Power management:
- During suspend, set power state to 'unknown' for all devices, not
just those with drivers (Lukas Wunner)
- Skip restoring Resizable BARs and VF Resizable BARs if device
doesn't respond to config reads, to avoid invalid array accesses
(Marco Nenciarini)
- Add pci_suspend_retains_context() so drivers can tell whether
devices retain internal state across suspend/resume, since some
platforms reset devices on suspend; use this in nvme to avoid
issues on Qcom RCs (Manivannan Sadhasivam)
Power control:
- Only to power on/off devices that actually support power control to
avoid poking at incompatible devices mentioned in DT (Manivannan
Sadhasivam)
Virtualization and resets:
- Log device readiness timeouts as errors, not warnings, because the
device is likely unusable in this case (Bjorn Helgaas)
- Wait for device readiness after soft reset (D3hot ->
D0uninitialized transition), when the device may respond with
Request Retry Status (RRS) if it needs more time to initialize
(Bjorn Helgaas)
- Drop unnecessary retries when restoring BARs because resets should
now already include all required delays (Lukas Wunner)
- Avoid FLR for MediaTek MT7925 WiFi, where FLR fails after a VM
terminates uncleanly (Jose Ignacio Tornos Martinez)
- Avoid SBR for Qualcomm WCN6855/WCN7850 WiFi, SDX62/SDX65 modems,
which seem not to support it correctly (Jose Ignacio Tornos
Martinez)
Peer-to-peer DMA:
- Prevent P2PDMA as well as CPU access to non-mappable BARs, e.g.,
s390 ISM BARs (Matt Evans)
- Add Intel QAT, DSA, IAA devices to whitelist (Lukas Wunner)
Endpoint framework:
- Add endpoint controller APIs for use by function drivers to
discover auxiliary blocks like DMA engines (Koichiro Den)
- Remember DesignWare eDMA engine base/size and expose them via the
EPC aux-resource API (Koichiro Den)
- Add endpoint embedded doorbell fallback, used if MSI allocation
fails (Koichiro Den)
- Validate BAR index and remove dead BAR read in endpoint doorbell
test (Carlos Bilbao)
- Unwind MSI/MSI-X vectors if NTB initialization fails part-way
through (Koichiro Den)
- Cache sleepable pci_irq_vector() value at ISR setup to avoid
calling it from hardirq context (Koichiro Den)
- Call sleepable pci_epc_raise_irq() from a work item instead of
atomic context, e.g., when setting bits in NTB peer doorbells in
the ntb_peer_db_set() path (Koichiro Den)
- Report 0-based vNTB doorbell vector to account for link event 0 and
historically skipped slot 1 (Koichiro Den)
- Prevent configfs writes to vNTB db_count and other values that are
already in use after EPC attach (Koichiro Den)
- Account for vNTB db_valid reserved slots (link event 0 and
historically skipped slot 1) so they don't appear as valid
doorbells (Koichiro Den)
- Implement vNTB .db_vector_count()/mask() for doorbells so clients
can use multiple vectors and avoid thundering herds (Koichiro Den)
- Report 0-based NTB doorbell vector to account for link event 0 and
historically skipped slot 1 (Koichiro Den)
- Fix doorbell bitmask and IRQ vector handling to clear only
specified bits, use the correct vector for non-contiguous Linux IRQ
numbers, and validate incoming vectors (Koichiro Den)
- Implement NTB .db_vector_count()/mask() for doorbells so clients
can use multiple vectors (Koichiro Den)
Native PCIe controller infrastructure:
- Add pci_host_common_link_train_delay() for the mandatory delay
after > 5GT/s Link training completes and use it for cadence HPA,
j721e, LGA; dwc; aardvark, mediatek-gen3, rzg3s (Hans Zhang)
- Protect root bus removal with rescan lock in altera, brcmstb,
cadence, dwc, iproc, mediatek, plda, rockchip to prevent
use-after-free or crashes when racing with sysfs rescan or hotplug
(Hans Zhang)
- Add pci_host_common_parse_ports() for use by any native driver to
parse Root Port properties (per-Link features like width, speed,
PHY, power and reset control, etc should be described in Root Port
stanzas, not the host bridge; currently only reset GPIOs
implemented) (Sherry Sun)
New native PCIe controller drivers:
- Add DT binding and driver for UltraRISC DP1000 PCIe controller
(Xincheng Zhang, Jia Wang)
Altera PCIe controller driver:
- Do not dispose of the parent IRQ mapping, which belongs to the
parent interrupt controller (Mahesh Vaidya)
- Fix chained IRQ handler ordering issue and resource leaks on probe
failure (Mahesh Vaidya)
AMD MDB PCIe controller driver:
- Assert PERST# on shutdown so any connected Endpoints are held in
reset during shutdown (Sai Krishna Musham)
Amlogic Meson PCIe controller driver:
- Propagate devm_add_action_or_reset() failure to fix probe error
path (Shuvam Pandey)
- Add .remove() callback to deinitialize the host bridge and power
off the PHY (Shuvam Pandey)
Broadcom iProc PCIe controller driver:
- Restore .map_irq() assignment; its removal broke INTx on the iproc
platform bus driver (Mark Tomlinson)
Broadcom STB PCIe controller driver:
- No change, but products using certain WiFi devices may be affected
by removal of CONFIG_PCIE_BUS_* (see above)
Freescale i.MX6 PCIe controller driver:
- Move IMX6SX_GPR12_PCIE_TEST_POWERDOWN handling into the core reset
functions (Richard Zhu)
- Assert PERST# before enabling regulators to ensure that even if
power is enabled, endpoint stays inactive until REFCLK is stable
(Sherry Sun)
- Parse reset properties in Root Port nodes (falling back to host
bridge) to help support Key E connectors and the pwrctrl framework
(Sherry Sun)
- Configure i.MX95 REF_USE_PAD before PHY reset (Richard Zhu)
- Assert i.MX95 ref_clk_en after reference clock stabilizes (Richard
Zhu)
- Integrate new pwrctrl API for DTs with Root Port-level power
supplies (Sherry Sun)
Intel Gateway PCIe controller driver:
- Enable clock before PHY init for correct ordering (Florian Eckert)
- Add .start_link() callback so the driver works again (Florian
Eckert)
- Stop overwriting the ATU base address discovered by
dw_pcie_get_resources() (Florian Eckert)
- Add DT 'atu' region since this is hardware-specific, and fall back
to driver default if lacking (Florian Eckert)
Loongson PCIe controller driver:
- Ignore downstream devices only on internal bridges to avoid
Loongson hardware issue (Rong Zhang)
- Quirk old Loongson-3C6000 bridges that advertise incorrect
supported link speeds (Ziyao Li)
Marvell MVEBU PCIe controller driver:
- Use fixed-width interrupt masks to avoid truncation in 64-bit
builds (Rosen Penev)
MediaTek PCIe controller driver:
- Use FIELD_PREP() to fix incorrect operator precedence in
PCIE_FTS_NUM_L0 (Li RongQing)
- Fix IRQ domain leak when port fails to enable (Manivannan
Sadhasivam)
- Use actual physical address for MSI message address instead of
virt_to_phys() (Manivannan Sadhasivam)
- Add EcoNet EN7528 to DT binding (Caleb James DeLisle)
MediaTek PCIe Gen3 controller driver:
- Deassert PCIE_PHY_RSTB so REFCLK is stable for at least 100ms
(PCIE_T_PVPERL_MS) before deasserting PERST# (Jian Yang)
- Add .shutdown() to assert PERST# before powering down device (Jian
Yang)
- Do full device power down on removal, including asserting PERST#,
when removing driver (Chen-Yu Tsai)
- Fix a 'failed to create pwrctrl devices' error message that was
inadvertently skipped (Chen-Yu Tsai)
NVIDIA Tegra194 PCIe controller driver:
- Program the DesignWare PORT_AFR L1 entrance latency based on the
'aspm-l1-entry-delay-ns' DT property (Manikanta Maddireddy)
Qualcomm PCIe controller driver:
- Add Eliza SoC compatible in DT binding (Krishna Chaitanya Chundru)
- Set max OPP during resume so DBI register accesses don't fail with
NoC errors (Qiang Yu)
- Add pci_host_common_d3cold_possible() to determine whether
downstream devices are already in D3hot and wakeup-enabled devices
are capable of generating PME from D3cold (Krishna Chaitanya
Chundru)
- Add .get_ltssm() callback to get the LTSSM status without DBI,
since DBI may be inaccessible after PME_Turn_Off (Krishna Chaitanya
Chundru)
- Power down PHY via PARF_PHY_CTRL before disabling rails/clocks to
avoid power leakage (Krishna Chaitanya Chundru)
- Decide whether suspend should put the link in L2 and power down
using pci_host_common_d3cold_possible() instead of checking whether
ASPM L1 is enabled (Krishna Chaitanya Chundru)
- Add qcom D3cold support to tear down interconnect bandwidth and OPP
votes (Krishna Chaitanya Chundru)
- Handle unsupported mixed PERST#/PHY DT configurations, e.g., PHY in
RP node while PERST# is in the RC node, but warn about the DT issue
(Qiang Yu)
- Program T_POWER_ON based on DT 't-power-on-us' property in case
hardware advertises incorrect values (Krishna Chaitanya Chundru)
- Disable ASPM L0s for SA8775P (Shawn Guo)
- Initialize DWC MSI lock for firmware-managed ECAM hosts, which
don't use the dw_pcie_host_init() path that initializes the lock
(Yadu M G)
Renesas RZ/G3S PCIe controller driver:
- Add RZ/V2N DT support (Lad Prabhakar)
SOPHGO PCIe controller driver:
- Add 'dma-coherent' DT property for sg2042-pcie driver (Han Gao)
Synopsys DesignWare PCIe controller driver:
- Apply ECRC TLP Digest workaround for all DesignWare cores prior to
5.10a, not just 4.90a and 5.00a (Manikanta Maddireddy)
- Use common struct dw_pcie 'mode' rather than duplicating it in
artpec6, dra7xx, dwc-pcie, and keembay driver structs (Hans Zhang)
- Use DEFINE_SHOW_ATTRIBUTE for ltssm_status debugfs to reduce
boilerplate and fix a seq_file memory leak by including a
.release() callback (Hans Zhang)
- Fix a signedness bug in fault injection test code (Dan Carpenter)
- Avoid NULL pointer dereference when tearing down debugfs for
controller that lacks RAS DES capability (Shuvam Pandey)
MicroSemi Switchtec management driver:
- Add Gen6 Device IDs (Ben Reed)
Miscellaneous:
- Remove unused gpio.h include from amd-mdb, designware-plat, fu740,
visconti drivers (Andy Shevchenko)
- Fix typos in documentation (josh ziegler)
- Use FIELD_MODIFY() instead of open-coding it (Hans Zhang)"
* tag 'pci-v7.2-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (168 commits)
PCI/sysfs: Use kstrtobool() to parse the ROM attribute input
PCI/sysfs: Limit BAR resize attribute scope to platforms with PCI mmap
PCI/sysfs: Remove pci_create_legacy_files() and pci_sysfs_init()
PCI/sysfs: Convert legacy I/O and memory attributes to static definitions
PCI/sysfs: Add __weak pci_legacy_has_sparse() helper
alpha/PCI: Compute legacy size in pci_mmap_legacy_page_range()
PCI: Add macros for legacy I/O and memory address space sizes
PCI/sysfs: Remove pci_{create,remove}_sysfs_dev_files()
alpha/PCI: Convert resource files to static attributes
alpha/PCI: Add static PCI resource attribute macros
alpha/PCI: Remove WARN from __pci_mmap_fits() and __legacy_mmap_fits()
alpha/PCI: Fix __pci_mmap_fits() overflow for zero-length BARs
alpha/PCI: Use PCI resource accessor macros
alpha/PCI: Use BAR index in sysfs attr->private instead of resource pointer
alpha/PCI: Add security_locked_down() check to pci_mmap_resource()
PCI/sysfs: Limit pci_sysfs_init() late_initcall compile scope
PCI/sysfs: Add stubs for pci_{create,remove}_sysfs_dev_files()
PCI/sysfs: Warn about BAR resize failure in __resource_resize_store()
PCI/sysfs: Convert PCI resource files to static attributes
PCI/proc: Fix race between pci_proc_init() and pci_bus_add_device()
...
Pull misc timer fixes from Ingo Molnar:
- Fix timekeeping locking order bug in the timekeeping init code
(Mikhail Gavrilov)
- Fix u64 multiplication bug in the posix-cpu-timers code on 32-bit
kernels (Zhan Xusheng)
- Fix macro name in comment block (Ethan Nelson-Moore)
- Fix off-by-one bug in the compat settimeofday() usecs validation code
(Wang Yan)
* tag 'timers-urgent-2026-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Fix off-by-one in compat settimeofday() usec validation
hrtimer: Correct CONFIG_NO_HZ_COMMON macro name in comment
posix-cpu-timers: Use u64 multiplication in update_rlimit_cpu()
timekeeping: Register default clocksource before taking tk_core.lock
Pull misc CPU hotplug fixes from Ingo Molnar:
- Fix CPU hotplug error handling rollback bug (Bradley Morgan)
- Fix possible output OOB write bug in the sysfs hotplug states
printing code (Bradley Morgan)
* tag 'smp-urgent-2026-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu: hotplug: Bound hotplug states sysfs output
cpu: hotplug: Preserve per instance callback errors
Pull locking fix from Ingo Molnar:
- Fix the incorrect RCU protection in rt_spin_unlock() (Thomas
Gleixner)
* tag 'locking-urgent-2026-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rt: Fix the incorrect RCU protection in rt_spin_unlock()
Pull misc core fixes from Ingo Molnar:
- Fix an MM-CID race that can cause an OOB write (Rik van Riel)
- Fix a debugobjects OOM handling race (Thomas Gleixner)
* tag 'core-urgent-2026-06-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
debugobjects: Plug race against a concurrent OOM disable
sched/mmcid: Fix OOB clear_bit when CID is MM_CID_UNSET in fixup path
Pull sched_ext tree reorg from Tejun Heo:
"Pure source reorganization with no functional change:
- the kernel/sched/ext* files move into a new kernel/sched/ext/
subdirectory
- the headers and sources are made self-contained so editor tooling
can parse each file on its own"
* tag 'sched_ext-for-7.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Move shared helpers from ext.c into internal.h and cid.h
sched_ext: Make kernel/sched/ext/ sources self-contained for clangd
sched_ext: Move sources under kernel/sched/ext/
BPF LSM programs can currently attach to xfrm_decode_session(). That
hook may return an error, but security_skb_classify_flow() calls it
from a void path and triggers BUG_ON() if an error is returned.
Disable BPF attachment to the hook to prevent a BPF LSM program from
turning packet classification into a full panic.
Fixes: 9e4e01dfd3 ("bpf: lsm: Implement attach, detach and execution")
Signed-off-by: Bradley Morgan <include@grrlz.net>
Link: https://lore.kernel.org/r/20260619130305.27779-1-include@grrlz.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
