This driver uses the legacy gpiolib interfaces to get gpio
numbers from platform data. There are no in-tree users of
this driver, so nothing defines the platform data.
Add a dependency on GPIOLIB_LEGACY for the moment to avoid the build
failure, and make sure the sound driver does not get built without the
mfd portion either pass that dependency along.
Alternatively, we could remove the mfd driver along with the backlight
and regulator portions.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250808151822.536879-15-arnd@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
This driver uses the legacy gpiolib interfaces to get gpio
numbers from platform data:
drivers/mfd/si476x-i2c.c: In function 'si476x_core_start':
drivers/mfd/si476x-i2c.c:133:21: error: implicit declaration of function 'gpio_is_valid'; did you mean 'uuid_is_valid'? [-Werror=implicit-function-declaration]
133 | if (gpio_is_valid(core->gpio_reset))
There are no in-tree users of this driver, so nothing defines
the platform data.
Add a dependency on GPIOLIB_LEGACY for the moment to avoid the build
failure, and make sure the sound driver does not get built without the
mfd portion either pass that dependency along.
Alternatively, we could remove the mfd driver along with the radio and
sound portions.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202507231653.UFlH2dMO-lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250808151822.536879-14-arnd@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Move several embedded controller bindings (like ChromeOS EC, Gateworks
System Controller and Kontron sl28cpld Board Management) to new
subdirectory "embedded-controller" matching their purpose.
An embedded controller (EC) is a discrete component that contains a
microcontroller (i.e. a small CPU running a small firmware without
operating system) mounted into a larger computer system running
a fully fledged operating system that needs to utilize the embedded
controller as part of its operation.
So far the EC bindings were split between "mfd" and "platform"
directory. MFD name comes from Linux, not hardware, and "platform" is a
bit too generic.
Rename Gateworks GSC and Huawei Gaokun filenames to match compatible, as
preferred for bindings.
Acked-by: Michael Walle <mwalle@kernel.org> # for sl28cpld
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://lore.kernel.org/r/20250825081201.9775-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
The ASpeed lpc-snoop nodes have a "clocks" property which isn't
documented. It looks like all the LPC child devices have the same clock
source. Perhaps it is the parent device that should have the clock, but
it's too late for that. The driver for lpc-snoop requires a clock to be
present.
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20250807132909.3291770-1-robh@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
clang-21 warns about one uninitialized variable getting dereferenced
in madera_dev_init:
drivers/mfd/madera-core.c:739:10: error: variable 'mfd_devs' is uninitialized when used here [-Werror,-Wuninitialized]
739 | mfd_devs, n_devs,
| ^~~~~~~~
drivers/mfd/madera-core.c:459:33: note: initialize the variable 'mfd_devs' to silence this warning
459 | const struct mfd_cell *mfd_devs;
| ^
| = NULL
The code is actually correct here because n_devs is only nonzero
when mfd_devs is a valid pointer, but this is impossible for the
compiler to see reliably.
Change the logic to check for the pointer as well, to make this easier
for the compiler to follow.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20250807071932.4085458-1-arnd@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
When `devm_add_action_or_reset()` fails, it is due to a failed memory
allocation and will thus return `-ENOMEM`. `dev_err_probe()` doesn't do
anything when error is `-ENOMEM`. Therefore, remove the useless call to
`dev_err_probe()` when `devm_add_action_or_reset()` fails, and just
return the value instead.
Signed-off-by: Waqar Hameed <waqar.hameed@axis.com>
Reviewed-by: Sven Peter <sven@kernel.org>
Link: https://lore.kernel.org/r/pnd8qjym7td.a.out@axis.com
Signed-off-by: Lee Jones <lee@kernel.org>
We observed the initial probe of the da9063 failing in
da9063_get_device_type in about 30% of boots on a Xilinx ZynqMP based
board. The problem originates in da9063_i2c_blockreg_read, which uses
a single bus transaction to turn the register page and then read a
register. On the bus, this should translate to a write to register 0,
followed by a read to the target register, separated by a repeated
start. However, we found that after the write to register 0, the
controller sometimes continues directly with the register address of
the read request, without sending the chip address or a repeated start
in between, which makes the read request invalid.
To fix this, separate turning the page and reading the register into
two separate transactions. This brings the initialization code in line
with the rest of the driver, which uses register maps (which to my
knowledge do not use repeated starts after turning the page). This has
been included in our kernel for several months and was recently
included in a shipped product. For us, it reliably fixes the issue,
and we have not observed any new issues.
While the underlying problem is probably with the i2c controller or
its driver, I still propose a change here in the interest of
robustness: First, I'm not sure this issue can be fixed on the
controller side, since there are other issues related to repeated
start which can't (AR# 60695, AR# 61664). Second, similar problems
might exist with other controllers.
Signed-off-by: Jens Kehne <jens.kehne@agilent.com>
Link: https://lore.kernel.org/r/20250804133754.3496718-1-jens.kehne@agilent.com
Signed-off-by: Lee Jones <lee@kernel.org>
Testing has shown that reading multiple registers at once (for 10-bit
ADC values) does not work. Set the use_single_read regmap_config flag
to make regmap split these for us.
This should fix temperature opregion accesses done by
drivers/acpi/pmic/intel_pmic_chtdc_ti.c and is also necessary for
the upcoming drivers for the ADC and battery MFD cells.
Fixes: 6bac0606fd ("mfd: Add support for Cherry Trail Dollar Cove TI PMIC")
Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250804133240.312383-1-hansg@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
guard() makes sure that the mutex gets unlocked when the function returns
and thus removes the need for unlock gotos or similar mechanisms and
therefore allows for a simpler function structure.
So convert the qnap_mcu_exec function to use it.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250804130726.3180806-4-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>
Relying on other components to include those basic types is unreliable
and may cause compile errors like:
../include/linux/mfd/qnap-mcu.h:13:9: error: unknown type name ‘u32’
13 | u32 baud_rate;
| ^~~
../include/linux/mfd/qnap-mcu.h:17:9: error: unknown type name ‘bool’
17 | bool usb_led;
| ^~~~
So make sure, the types used in the header are available.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250804130726.3180806-2-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>
Add the TS233 compatible and affiliated driver data to qnap-mcu.
The TS233 is mostly similar to the TS433, except not having any of the
PCIe components, so there are only 2 drives.
The fan pwm-limits from the vendor-configuration also are the same
as for the ts433 variant.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250730173423.1878599-3-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>
The QIXIS FPGA found on Layerscape boards such as LX2160AQDS, LS1028AQDS
etc deals with power-on-reset timing, muxing etc. Use the simple-mfd-i2c
as its core driver by adding its compatible string (already found in
some dt files). By using the simple-mfd-i2c driver, any child device
will have access to the i2c regmap created by it.
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20250707153120.1371719-1-ioana.ciornei@nxp.com
Signed-off-by: Lee Jones <lee@kernel.org>
Pull nolibc updates from Thomas Weißschuh:
"Only small bugfixes and cleanups"
* tag 'nolibc-20250928-for-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc:
tools/nolibc: add stdbool.h to nolibc includes
tools/nolibc: make time_t robust if __kernel_old_time_t is missing in host headers
selftests/nolibc: remove outdated comment about construct order
selftests/nolibc: fix EXPECT_NZ macro
tools/nolibc: drop wait4() support
kselftest/arm64: tpidr2: Switch to waitpid() over wait4()
tools/nolibc: fold llseek fallback into lseek()
tools/nolibc: remove __nolibc_enosys() fallback from fork functions
tools/nolibc: remove __nolibc_enosys() fallback from dup2()
tools/nolibc: remove __nolibc_enosys() fallback from *at() functions
tools/nolibc: remove __nolibc_enosys() fallback from time64-related functions
tools/nolibc: use tabs instead of spaces for indentation
tools/nolibc: avoid error in dup2() if old fd equals new fd
selftests/nolibc: always compile the kernel with GCC
selftests/nolibc: don't pass CC to toplevel Makefile
selftests/nolibc: deduplicate invocations of toplevel Makefile
selftests/nolibc: be more specific about variables affecting nolibc-test
tools/nolibc: fix error return value of clock_nanosleep()
Pull rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Derive 'Zeroable' for all structs and unions generated by 'bindgen'
where possible and corresponding cleanups. To do so, add the
'pin-init' crate as a dependency to 'bindings' and 'uapi'.
It also includes its first use in the 'cpufreq' module, with more
to come in the next cycle.
- Add warning to the 'rustdoc' target to detect broken 'srctree/'
links and fix existing cases.
- Remove support for unused (since v6.16) host '#[test]'s,
simplifying the 'rusttest' target. Tests should generally run
within KUnit.
'kernel' crate:
- Add 'ptr' module with a new 'Alignment' type, which is always a
power of two and is used to validate that a given value is a valid
alignment and to perform masking and alignment operations:
// Checked at build time.
assert_eq!(Alignment:🆕:<16>().as_usize(), 16);
// Checked at runtime.
assert_eq!(Alignment::new_checked(15), None);
assert_eq!(Alignment::of::<u8>().log2(), 0);
assert_eq!(0x25u8.align_down(Alignment:🆕:<0x10>()), 0x20);
assert_eq!(0x5u8.align_up(Alignment:🆕:<0x10>()), Some(0x10));
assert_eq!(u8::MAX.align_up(Alignment:🆕:<0x10>()), None);
It also includes its first use in Nova.
- Add 'core::mem::{align,size}_of{,_val}' to the prelude, matching
Rust 1.80.0.
- Keep going with the steps on our migration to the standard library
'core::ffi::CStr' type (use 'kernel::{fmt, prelude::fmt!}' and use
upstream method names).
- 'error' module: improve 'Error::from_errno' and 'to_result'
documentation, including examples/tests.
- 'sync' module: extend 'aref' submodule documentation now that it
exists, and more updates to complete the ongoing move of 'ARef' and
'AlwaysRefCounted' to 'sync::aref'.
- 'list' module: add an example/test for 'ListLinksSelfPtr' usage.
- 'alloc' module:
- Implement 'Box::pin_slice()', which constructs a pinned slice of
elements.
- Provide information about the minimum alignment guarantees of
'Kmalloc', 'Vmalloc' and 'KVmalloc'.
- Take minimum alignment guarantees of allocators for
'ForeignOwnable' into account.
- Remove the 'allocator_test' (including 'Cmalloc').
- Add doctest for 'Vec::as_slice()'.
- Constify various methods.
- 'time' module:
- Add methods on 'HrTimer' that can only be called with exclusive
access to an unarmed timer, or from timer callback context.
- Add arithmetic operations to 'Instant' and 'Delta'.
- Add a few convenience and access methods to 'HrTimer' and
'Instant'.
'macros' crate:
- Reduce collections in 'quote!' macro.
And a few other cleanups and improvements"
* tag 'rust-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (58 commits)
gpu: nova-core: use Alignment for alignment-related operations
rust: add `Alignment` type
rust: macros: reduce collections in `quote!` macro
rust: acpi: use `core::ffi::CStr` method names
rust: of: use `core::ffi::CStr` method names
rust: net: use `core::ffi::CStr` method names
rust: miscdevice: use `core::ffi::CStr` method names
rust: kunit: use `core::ffi::CStr` method names
rust: firmware: use `core::ffi::CStr` method names
rust: drm: use `core::ffi::CStr` method names
rust: cpufreq: use `core::ffi::CStr` method names
rust: configfs: use `core::ffi::CStr` method names
rust: auxiliary: use `core::ffi::CStr` method names
drm/panic: use `core::ffi::CStr` method names
rust: device: use `kernel::{fmt,prelude::fmt!}`
rust: sync: use `kernel::{fmt,prelude::fmt!}`
rust: seq_file: use `kernel::{fmt,prelude::fmt!}`
rust: kunit: use `kernel::{fmt,prelude::fmt!}`
rust: file: use `kernel::{fmt,prelude::fmt!}`
rust: device: use `kernel::{fmt,prelude::fmt!}`
...
Pull bpf updates from Alexei Starovoitov:
- Support pulling non-linear xdp data with bpf_xdp_pull_data() kfunc
(Amery Hung)
Applied as a stable branch in bpf-next and net-next trees.
- Support reading skb metadata via bpf_dynptr (Jakub Sitnicki)
Also a stable branch in bpf-next and net-next trees.
- Enforce expected_attach_type for tailcall compatibility (Daniel
Borkmann)
- Replace path-sensitive with path-insensitive live stack analysis in
the verifier (Eduard Zingerman)
This is a significant change in the verification logic. More details,
motivation, long term plans are in the cover letter/merge commit.
- Support signed BPF programs (KP Singh)
This is another major feature that took years to materialize.
Algorithm details are in the cover letter/marge commit
- Add support for may_goto instruction to s390 JIT (Ilya Leoshkevich)
- Add support for may_goto instruction to arm64 JIT (Puranjay Mohan)
- Fix USDT SIB argument handling in libbpf (Jiawei Zhao)
- Allow uprobe-bpf program to change context registers (Jiri Olsa)
- Support signed loads from BPF arena (Kumar Kartikeya Dwivedi and
Puranjay Mohan)
- Allow access to union arguments in tracing programs (Leon Hwang)
- Optimize rcu_read_lock() + migrate_disable() combination where it's
used in BPF subsystem (Menglong Dong)
- Introduce bpf_task_work_schedule*() kfuncs to schedule deferred
execution of BPF callback in the context of a specific task using the
kernel’s task_work infrastructure (Mykyta Yatsenko)
- Enforce RCU protection for KF_RCU_PROTECTED kfuncs (Kumar Kartikeya
Dwivedi)
- Add stress test for rqspinlock in NMI (Kumar Kartikeya Dwivedi)
- Improve the precision of tnum multiplier verifier operation
(Nandakumar Edamana)
- Use tnums to improve is_branch_taken() logic (Paul Chaignon)
- Add support for atomic operations in arena in riscv JIT (Pu Lehui)
- Report arena faults to BPF error stream (Puranjay Mohan)
- Search for tracefs at /sys/kernel/tracing first in bpftool (Quentin
Monnet)
- Add bpf_strcasecmp() kfunc (Rong Tao)
- Support lookup_and_delete_elem command in BPF_MAP_STACK_TRACE (Tao
Chen)
* tag 'bpf-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (197 commits)
libbpf: Replace AF_ALG with open coded SHA-256
selftests/bpf: Add stress test for rqspinlock in NMI
selftests/bpf: Add test case for different expected_attach_type
bpf: Enforce expected_attach_type for tailcall compatibility
bpftool: Remove duplicate string.h header
bpf: Remove duplicate crypto/sha2.h header
libbpf: Fix error when st-prefix_ops and ops from differ btf
selftests/bpf: Test changing packet data from kfunc
selftests/bpf: Add stacktrace map lookup_and_delete_elem test case
selftests/bpf: Refactor stacktrace_map case with skeleton
bpf: Add lookup_and_delete_elem for BPF_MAP_STACK_TRACE
selftests/bpf: Fix flaky bpf_cookie selftest
selftests/bpf: Test changing packet data from global functions with a kfunc
bpf: Emit struct bpf_xdp_sock type in vmlinux BTF
selftests/bpf: Task_work selftest cleanup fixes
MAINTAINERS: Delete inactive maintainers from AF_XDP
bpf: Mark kfuncs as __noclone
selftests/bpf: Add kprobe multi write ctx attach test
selftests/bpf: Add kprobe write ctx attach test
selftests/bpf: Add uprobe context ip register change test
...
Pull VDSO updates from Thomas Gleixner:
- Further consolidation of the VDSO infrastructure and the common data
store
- Simplification of the related Kconfig logic
- Improve the VDSO selftest suite
* tag 'timers-vdso-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests: vDSO: Drop vdso_test_clock_getres
selftests: vDSO: vdso_test_abi: Add tests for clock_gettime64()
selftests: vDSO: vdso_test_abi: Test CPUTIME clocks
selftests: vDSO: vdso_test_abi: Use explicit indices for name array
selftests: vDSO: vdso_test_abi: Drop clock availability tests
selftests: vDSO: vdso_test_abi: Use ksft_finished()
selftests: vDSO: vdso_test_abi: Correctly skip whole test with missing vDSO
selftests: vDSO: Fix -Wunitialized in powerpc VDSO_CALL() wrapper
vdso: Add struct __kernel_old_timeval forward declaration to gettime.h
vdso: Gate VDSO_GETRANDOM behind HAVE_GENERIC_VDSO
vdso: Drop Kconfig GENERIC_VDSO_TIME_NS
vdso: Drop Kconfig GENERIC_VDSO_DATA_STORE
vdso: Drop kconfig GENERIC_COMPAT_VDSO
vdso: Drop kconfig GENERIC_VDSO_32
riscv: vdso: Untangle Kconfig logic
time: Build generic update_vsyscall() only with generic time vDSO
vdso/gettimeofday: Remove !CONFIG_TIME_NS stubs
vdso: Move ENABLE_COMPAT_VDSO from core to arm64
ARM: VDSO: Remove cntvct_ok global variable
vdso/datastore: Gate time data behind CONFIG_GENERIC_GETTIMEOFDAY
Pull clocksource updates from Thomas Gleixner:
- Further preparations for modular clocksource/event drivers
- The usual device tree updates to support new chip variants and the
related changes to thise drivers
- Avoid a 64-bit division in the TEGRA186 driver, which caused a build
fail on 32-bit machines.
- Small fixes, improvements and cleanups all over the place
* tag 'timers-clocksource-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
dt-bindings: timer: exynos4210-mct: Add compatible for ARTPEC-9 SoC
clocksource/drivers/sh_cmt: Split start/stop of clock source and events
clocksource/drivers/clps711x: Fix resource leaks in error paths
clocksource/drivers/arm_global_timer: Add auto-detection for initial prescaler values
clocksource/drivers/ingenic-sysost: Convert from round_rate() to determine_rate()
clocksource/drivers/timer-tegra186: Don't print superfluous errors
clocksource/drivers/timer-rtl-otto: Simplify documentation
clocksource/drivers/timer-rtl-otto: Do not interfere with interrupts
clocksource/drivers/timer-rtl-otto: Drop set_counter function
clocksource/drivers/timer-rtl-otto: Work around dying timers
clocksource/drivers/timer-ti-dm : Capture functionality for OMAP DM timer
clocksource/drivers/arm_arch_timer_mmio: Add MMIO clocksource
clocksource/drivers/arm_arch_timer_mmio: Switch over to standalone driver
clocksource/drivers/arm_arch_timer: Add standalone MMIO driver
ACPI: GTDT: Generate platform devices for MMIO timers
clocksource/drivers/nxp-pit: Add NXP Automotive s32g2 / s32g3 support
dt: bindings: fsl,vf610-pit: Add compatible for s32g2 and s32g3
clocksource/drivers/vf-pit: Rename the VF PIT to NXP PIT
clocksource/drivers/vf-pit: Unify the function name for irq ack
clocksource/drivers/vf-pit: Consolidate calls to pit_*_disable/enable
...
Pull timer core updates from Thomas Gleixner:
- Address the inconsistent shutdown sequence of per CPU clockevents on
CPU hotplug, which only removed it from the core but failed to invoke
the actual device driver shutdown callback. This kept the timer
active, which prevented power savings and caused pointless noise in
virtualization.
- Encapsulate the open coded access to the hrtimer clock base, which is
a private implementation detail, so that the implementation can be
changed without breaking a lot of usage sites.
- Enhance the debug output of the clocksource watchdog to provide
better information for analysis.
- The usual set of cleanups and enhancements all over the place
* tag 'timers-core-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time: Fix spelling mistakes in comments
clocksource: Print durations for sync check unconditionally
LoongArch: Remove clockevents shutdown call on offlining
tick: Do not set device to detached state in tick_shutdown()
hrtimer: Reorder branches in hrtimer_clockid_to_base()
hrtimer: Remove hrtimer_clock_base:: Get_time
hrtimer: Use hrtimer_cb_get_time() helper
media: pwm-ir-tx: Avoid direct access to hrtimer clockbase
ALSA: hrtimer: Avoid direct access to hrtimer clockbase
lib: test_objpool: Avoid direct access to hrtimer clockbase
sched/core: Avoid direct access to hrtimer clockbase
timers/itimer: Avoid direct access to hrtimer clockbase
posix-timers: Avoid direct access to hrtimer clockbase
jiffies: Remove obsolete SHIFTED_HZ comment
Pull futex updates from Thomas Gleixner:
"A set of updates for futexes and related selftests:
- Plug the ptrace_may_access() race against a concurrent exec() which
allows to pass the check before the target's process transition in
exec() by taking a read lock on signal->ext_update_lock.
- A large set of cleanups and enhancement to the futex selftests. The
bulk of changes is the conversion to the kselftest harness"
* tag 'locking-futex-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
selftest/futex: Fix spelling mistake "boundarie" -> "boundary"
selftests/futex: Remove logging.h file
selftests/futex: Drop logging.h include from futex_numa
selftests/futex: Refactor futex_numa_mpol with kselftest_harness.h
selftests/futex: Refactor futex_priv_hash with kselftest_harness.h
selftests/futex: Refactor futex_waitv with kselftest_harness.h
selftests/futex: Refactor futex_requeue with kselftest_harness.h
selftests/futex: Refactor futex_wait with kselftest_harness.h
selftests/futex: Refactor futex_wait_private_mapped_file with kselftest_harness.h
selftests/futex: Refactor futex_wait_unitialized_heap with kselftest_harness.h
selftests/futex: Refactor futex_wait_wouldblock with kselftest_harness.h
selftests/futex: Refactor futex_wait_timeout with kselftest_harness.h
selftests/futex: Refactor futex_requeue_pi_signal_restart with kselftest_harness.h
selftests/futex: Refactor futex_requeue_pi_mismatched_ops with kselftest_harness.h
selftests/futex: Refactor futex_requeue_pi with kselftest_harness.h
selftests: kselftest: Create ksft_print_dbg_msg()
futex: Don't leak robust_list pointer on exec race
selftest/futex: Compile also with libnuma < 2.0.16
selftest/futex: Reintroduce "Memory out of range" numa_mpol's subtest
selftest/futex: Make the error check more precise for futex_numa_mpol
...
Pull smp doc fixlet from Thomas Gleixner:
"An update of the stale smp_call_function_many() documentation to bring
it back in sync with the actual implementation"
* tag 'smp-core-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
smp: Fix up and expand the smp_call_function_many() kerneldoc
Pull irq chip driver updates from Thomas Gleixner:
- Use the startup/shutdown callbacks for the PCI/MSI per device
interrupt domains.
This allows us to initialize the RISCV PLIC interrupt hierarchy
correctly and provides a mechanism to decouple the masking and
unmasking during run-time from the expensive PCI mask and unmask when
the underlying MSI provider implementation allows the interrupt to be
masked.
- Initialize the RISCV PLIC MSI interrupt hierarchy correctly so that
the affinity assignment works correctly by switching it over to the
startup/shutdown scheme
- Allow MSI providers to opt out from masking a PCI/MSI interrupt at
the PCI device during operation when the provider can mask the
interrupt at the underlying interrupt chip. This reduces the overhead
in scenarios where disable_irq()/enable_irq() is utilized frequently
by a driver.
The PCI/MSI device level [un]masking is only required on startup and
shutdown in this case.
- Remove the conditional mask/unmask logic in the PCI/MSI layer as this
is now handled unconditionally.
- Replace the hardcoded interrupt routing in the Loongson EIOINTC
interrupt driver to respect the firmware settings and spread them out
to different CPU interrupt inputs so that the demultiplexing handler
only needs to read only a single 64-bit status register instead of
four, which significantly reduces the overhead in VMs as the status
register access causes a VM exit.
- Add support for the new AST2700 SCU interrupt controllers
- Use the legacy interrupt domain setup for the Loongson PCH-LPC
interrupt controller, which resembles the x86 legacy PIC setup and
has the same hardcoded legacy requirements.
- The usual set of cleanups, fixes and improvements all over the place
* tag 'irq-drivers-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
irqchip/loongson-pch-lpc: Use legacy domain for PCH-LPC IRQ controller
PCI/MSI: Remove the conditional parent [un]mask logic
irqchip/msi-lib: Honor the MSI_FLAG_PCI_MSI_MASK_PARENT flag
irqchip/aspeed-scu-ic: Add support for AST2700 SCU interrupt controllers
dt-bindings: interrupt-controller: aspeed: Add AST2700 SCU IC compatibles
dt-bindings: mfd: aspeed: Add AST2700 SCU compatibles
irqchip/aspeed-scu-ic: Refactor driver to support variant-based initialization
irqchip/gic-v5: Fix error handling in gicv5_its_irq_domain_alloc()
irqchip/gic-v5: Fix loop in gicv5_its_create_itt_two_level() cleanup path
irqchip/gic-v5: Delete a stray tab
irqchip/sg2042-msi: Set irq type according to DT configuration
riscv: sophgo: dts: sg2044: Change msi irq type to IRQ_TYPE_EDGE_RISING
riscv: sophgo: dts: sg2042: Change msi irq type to IRQ_TYPE_EDGE_RISING
irqchip/gic-v2m: Handle Multiple MSI base IRQ Alignment
irqchip/renesas-rzg2l: Remove dev_err_probe() if error is -ENOMEM
irqchip: Use int type to store negative error codes
irqchip/gic-v5: Remove the redundant ITS cache invalidation
PCI/MSI: Check MSI_FLAG_PCI_MSI_MASK_PARENT in cond_[startup|shutdown]_parent()
irqchip/loongson-eiointc: Add multiple interrupt pin routing support
irqchip/loongson-eiointc: Route interrupt parsed from bios table
...
Pull irq core updates from Thomas Gleixner:
"A set of updates for the interrupt core subsystem:
- Introduce irq_chip_[startup|shutdown]_parent() to prepare for
addressing a few short comings in the PCI/MSI interrupt subsystem.
It allows to utilize the interrupt chip startup/shutdown callbacks
for initializing the interrupt chip hierarchy properly on certain
RISCV implementations and provides a mechanism to reduce the
overhead of masking and unmasking PCI/MSI interrupts during
operation when the underlying MSI provider can mask the interrupt.
The actual usage comes with the interrupt driver pull request.
- Add generic error handling for devm_request_*_irq()
This allows to remove the zoo of random error printk's all over the
usage sites.
- Add a mechanism to warn about long-running interrupt handlers
Long running interrupt handlers can introduce latencies and
tracking them down is a tedious task. The tracking has to be
enabled with a threshold on the kernel command line and utilizes a
static branch to remove the overhead when disabled.
- Update and extend the selftests which validate the CPU hotplug
interrupt migration logic
- Allow dropping the per CPU softirq lock on PREEMPT_RT kernels,
which causes contention and latencies all over the place.
The serialization requirements have been pushed down into the
actual affected usage sites already.
- The usual small cleanups and improvements"
* tag 'irq-core-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
softirq: Allow to drop the softirq-BKL lock on PREEMPT_RT
softirq: Provide a handshake for canceling tasklets via polling
genirq/test: Ensure CPU 1 is online for hotplug test
genirq/test: Drop CONFIG_GENERIC_IRQ_MIGRATION assumptions
genirq/test: Depend on SPARSE_IRQ
genirq/test: Fail early if interrupt request fails
genirq/test: Factor out fake-virq setup
genirq/test: Select IRQ_DOMAIN
genirq/test: Fix depth tests on architectures with NOREQUEST by default.
genirq: Add support for warning on long-running interrupt handlers
genirq/devres: Add error handling in devm_request_*_irq()
genirq: Add irq_chip_(startup/shutdown)_parent()
genirq: Remove GENERIC_IRQ_LEGACY
Pull rseq updates from Thomas Gleixner:
"Two fixes for RSEQ:
- Protect the event mask modification against the membarrier() IPI as
otherwise the RmW operation is unprotected and events might be lost
- Fix the weak symbol reference in rseq selftests
The current weak RSEQ symbols definitions which were added to allow
static linkage are not working correctly as they effectively
re-define the glibc symbols leading to multiple versions of the
symbols when compiled with -fno-common.
Mark them as 'extern' to convert them from weak symbol definitions
to weak symbol references. That works with static and dynamic
linkage independent of -fcommon and -fno-common"
* tag 'core-rseq-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rseq/selftests: Use weak symbol reference, not definition, to link with glibc
rseq: Protect event mask against membarrier IPI
Pull TIF bit unification updates from Thomas Gleixner:
"A set of changes to consolidate the generic TIF (thread info flag)
bits accross architectures.
All architectures define the same set of generic TIF bits. This makes
it pointlessly hard to add a new generic TIF bit or to change an
existing one.
Provide a generic variant and convert the architectures which utilize
the generic entry code over to use it. The TIF space is divided into
16 generic bits and 16 architecture specific bits, which turned out to
provide enough space on both sides"
* tag 'core-core-2025-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
LoongArch: Fix bitflag conflict for TIF_FIXADE
riscv: Use generic TIF bits
loongarch: Use generic TIF bits
s390/entry: Remove unused TIF flags
s390: Use generic TIF bits
x86: Use generic TIF bits
asm-generic: Provide generic TIF infrastructure
Pull x86 SEV and apic updates from Borislav Petkov:
- Add functionality to provide runtime firmware updates for the non-x86
parts of an AMD platform like the security processor (ASP) firmware,
modules etc, for example. The intent being that these updates are
interim, live fixups before a proper BIOS update can be attempted
- Add guest support for AMD's Secure AVIC feature which gives encrypted
guests the needed protection against a malicious hypervisor
generating unexpected interrupts and injecting them into such guest,
thus interfering with its operation in an unexpected and negative
manner.
The advantage of this scheme is that the guest determines which
interrupts and when to accept them vs leaving that to the benevolence
(or not) of the hypervisor
- Strictly separate the startup code from the rest of the kernel where
former is executed from the initial 1:1 mapping of memory.
The problem was that the toolchain-generated version of the code was
being executed from a different mapping of memory than what was
"assumed" during code generation, needing an ever-growing pile of
fixups for absolute memory references which are invalid in the early,
1:1 memory mapping during boot.
The major advantage of this is that there's no need to check the 1:1
mapping portion of the code for absolute relocations anymore and get
rid of the RIP_REL_REF() macro sprinkling all over the place.
For more info, see Ard's very detailed writeup on this [1]
- The usual cleanups and fixes
Link: https://lore.kernel.org/r/CAMj1kXEzKEuePEiHB%2BHxvfQbFz0sTiHdn4B%2B%2BzVBJ2mhkPkQ4Q@mail.gmail.com [1]
* tag 'x86_apic_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (49 commits)
x86/boot: Drop erroneous __init annotation from early_set_pages_state()
crypto: ccp - Add AMD Seamless Firmware Servicing (SFS) driver
crypto: ccp - Add new HV-Fixed page allocation/free API
x86/sev: Add new dump_rmp parameter to snp_leak_pages() API
x86/startup/sev: Document the CPUID flow in the boot #VC handler
objtool: Ignore __pi___cfi_ prefixed symbols
x86/sev: Zap snp_abort()
x86/apic/savic: Do not use snp_abort()
x86/boot: Get rid of the .head.text section
x86/boot: Move startup code out of __head section
efistub/x86: Remap inittext read-execute when needed
x86/boot: Create a confined code area for startup code
x86/kbuild: Incorporate boot/startup/ via Kbuild makefile
x86/boot: Revert "Reject absolute references in .head.text"
x86/boot: Check startup code for absence of absolute relocations
objtool: Add action to check for absence of absolute relocations
x86/sev: Export startup routines for later use
x86/sev: Move __sev_[get|put]_ghcb() into separate noinstr object
x86/sev: Provide PIC aliases for SEV related data objects
x86/boot: Provide PIC aliases for 5-level paging related constants
...
Pull x86 resource control updates from Borislav Petkov:
"Add support on AMD for assigning QoS bandwidth counters to resources
(RMIDs) with the ability for those resources to be tracked by the
counters as long as they're assigned to them.
Previously, due to hw limitations, bandwidth counts from untracked
resources would get lost when those resources are not tracked.
Refactor the code and user interfaces to be able to also support
other, similar features on ARM, for example"
* tag 'x86_cache_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (35 commits)
fs/resctrl: Fix counter auto-assignment on mkdir with mbm_event enabled
MAINTAINERS: resctrl: Add myself as reviewer
x86/resctrl: Configure mbm_event mode if supported
fs/resctrl: Introduce the interface to switch between monitor modes
fs/resctrl: Disable BMEC event configuration when mbm_event mode is enabled
fs/resctrl: Introduce the interface to modify assignments in a group
fs/resctrl: Introduce mbm_L3_assignments to list assignments in a group
fs/resctrl: Auto assign counters on mkdir and clean up on group removal
fs/resctrl: Introduce mbm_assign_on_mkdir to enable assignments on mkdir
fs/resctrl: Provide interface to update the event configurations
fs/resctrl: Add event configuration directory under info/L3_MON/
fs/resctrl: Support counter read/reset with mbm_event assignment mode
x86/resctrl: Implement resctrl_arch_reset_cntr() and resctrl_arch_cntr_read()
x86/resctrl: Refactor resctrl_arch_rmid_read()
fs/resctrl: Introduce counter ID read, reset calls in mbm_event mode
fs/resctrl: Pass struct rdtgroup instead of individual members
fs/resctrl: Add the functionality to unassign MBM events
fs/resctrl: Add the functionality to assign MBM events
x86,fs/resctrl: Implement resctrl_arch_config_cntr() to assign a counter with ABMC
fs/resctrl: Introduce event configuration field in struct mon_evt
...
Pull x86 cpuid updates from Borislav Petkov:
- Make UMIP instruction detection more robust
- Correct and cleanup AMD CPU topology detection; document the relevant
CPUID leaves topology parsing precedence on AMD
- Add support for running the kernel as guest on FreeBSD's Bhyve
hypervisor
- Cleanups and improvements
* tag 'x86_cpu_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/umip: Fix decoding of register forms of 0F 01 (SGDT and SIDT aliases)
x86/umip: Check that the instruction opcode is at least two bytes
Documentation/x86/topology: Detail CPUID leaves used for topology enumeration
x86/cpu/topology: Define AMD64_CPUID_EXT_FEAT MSR
x86/cpu/topology: Check for X86_FEATURE_XTOPOLOGY instead of passing has_xtopology
x86/cpu/cacheinfo: Simplify cacheinfo_amd_init_llc_id() using _cpuid4_info
x86/cpu: Rename and move CPU model entry for Diamond Rapids
x86/cpu: Detect FreeBSD Bhyve hypervisor
Pull x86 mitigation updates from Borislav Petkov:
- Add VMSCAPE to the attack vector controls infrastructure
- A bunch of the usual cleanups and fixlets, some of them resulting
from fuzzing the different mitigation options
* tag 'x86_bugs_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Report correct retbleed mitigation status
x86/bugs: Fix reporting of LFENCE retpoline
x86/bugs: Fix spectre_v2 forcing
x86/bugs: Remove uses of cpu_mitigations_off()
x86/bugs: Simplify SSB cmdline parsing
x86/bugs: Use early_param() for spectre_v2
x86/bugs: Use early_param() for spectre_v2_user
x86/bugs: Add attack vector controls for VMSCAPE
x86/its: Move ITS indirect branch thunks to .text..__x86.indirect_thunk
Pull x86 RAS updates from Borislav Petkov:
- Unify and refactor the MCA arch side and better separate code
- Cleanup and simplify the AMD RAS side, unify code, drop unused stuff
* tag 'ras_core_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce: Add a clear_bank() helper
x86/mce: Move machine_check_poll() status checks to helper functions
x86/mce: Separate global and per-CPU quirks
x86/mce: Do 'UNKNOWN' vendor check early
x86/mce: Define BSP-only SMCA init
x86/mce: Define BSP-only init
x86/mce: Set CR4.MCE last during init
x86/mce: Remove __mcheck_cpu_init_early()
x86/mce: Cleanup bank processing on init
x86/mce/amd: Put list_head in threshold_bank
x86/mce/amd: Remove smca_banks_map
x86/mce/amd: Remove return value for mce_threshold_{create,remove}_device()
x86/mce/amd: Rename threshold restart function
Pull x86 microcode loading updates from Borislav Petkov:
- Add infrastructure to be able to debug the microcode loader in a guest
- Refresh Intel old microcode revisions
* tag 'x86_microcode_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode: Add microcode loader debugging functionality
x86/microcode: Add microcode= cmdline parsing
x86/microcode/intel: Refresh the revisions that determine old_microcode
Pull x86 asm update from Borislav Petkov:
- Fix RDPID's output operand size in inline asm and use the insn
mnemonic because the minimum binutils version supports it
* tag 'x86_asm_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vdso: Fix output operand size of RDPID
