__igc_resume() calls netif_device_attach() only inside the
netif_running() branch, so an interface that was down during suspend
is never re-attached on resume. It then stays in the not-present state
that __igc_shutdown() set via netif_device_detach(): ethtool reports
ENODEV and every attempt to bring the interface up fails the
netif_device_present() check in __dev_open() with -ENODEV, silently,
since __igc_resume() returns 0. Only reloading the driver recovers the
device.
This is easy to hit in practice because NetworkManager brings managed
interfaces down before sleep unless Wake-on-LAN is configured, making
the adapter unusable after every suspend/resume cycle with WoL
disabled.
Re-attach the netdev on every successful resume, as igb and e1000e do.
Fixes: 6f31d6b643 ("igc: Refactor runtime power management flow")
Cc: stable@vger.kernel.org
Signed-off-by: Philipp David <pd-lkml@3b.pm>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20260804222205.1580328-11-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ipheth_sndbulk_callback() re-arms the carrier-check work on any
non-zero URB status:
else
schedule_delayed_work(&dev->carrier_work, 0);
Nothing ties that to the interface being up, so the work can be armed
again after ipheth_close() has already drained it, and stay armed
until the netdev whose private area embeds it is freed.
On unplug with a TX URB in flight, ipheth_disconnect() drains the work
through unregister_netdev() -> ipheth_close() ->
cancel_delayed_work_sync() and only then calls ipheth_kill_urbs().
usb_kill_urb() completes the in-flight TX URB with -ENOENT, so
ipheth_sndbulk_callback() runs after the drain and re-arms
carrier_work.
The same completion also re-arms the work if the interface is only
brought down while a TX URB is in flight, and
ipheth_carrier_check_work() then keeps re-queueing itself once a
second. unregister_netdev() does not call ipheth_close() for an
already-down interface, so nothing drains it on the later unplug
either.
In both cases free_netdev() frees the netdev while carrier_work is
still pending, and ipheth_carrier_check_work() dereferences freed
memory.
Tie the work to the interface state instead of chasing the completion:
disable it in ipheth_close() and enable it in ipheth_open(), so a
schedule_delayed_work() from the URB completion is a no-op whenever
the interface is not up. disable_delayed_work_sync() also waits for a
running instance, so it fully replaces the cancel_delayed_work_sync()
it takes the place of. The work starts out disabled in ipheth_probe()
so the enable/disable counts balance from the first open.
Reproduced under KASAN on linux-next (next-20260731) with dummy_hcd and
raw-gadget standing in for the device, driving the second path above (the
interface is already down, so unregister_netdev() does not call
ipheth_close()): 15 of 15 unpatched boots report a slab-use-after-free in
__run_timers(), freed by ipheth_disconnect() and re-armed from
ipheth_sndbulk_callback() via queue_delayed_work_on(). The
same trigger on a kernel differing only by this patch reports 0 of 15,
and the carrier check still functions across open/close cycles.
The reproducer needs an attached USB device that stops draining bulk OUT,
plus a link down and unplug, driven as root. It is not a privilege
boundary crossing and no exploit primitive was developed.
Found by 0sec (https://0sec.ai).
Fixes: bb1b40c7cb ("usbnet: ipheth: prevent TX queue timeouts when device not ready")
Cc: stable@vger.kernel.org
Signed-off-by: Doruk Tan Ozturk <doruk@0sec.ai>
Link: https://patch.msgid.link/20260802120602.42595-1-doruk@0sec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tbnet_tear_down() stops both rings and frees their frame buffers before
calling tb_xdomain_disable_paths(). tb_ring_stop() zeroes the ring's
descriptor base and tbnet_free_buffers() unmaps and frees the pages the
frames sit in, so by the time __tb_path_deactivate_hop() polls the hop's
'pending' bit, anything still in flight has nowhere to drain to.
The teardown sequence has been in this order since the driver was added.
The setup path has not: commit ff7cd07f30 ("net: thunderbolt: Enable
DMA paths only after rings are enabled") moved the path enable to the end
of tbnet_connected_work() and documented why:
/* Both logins successful so enable the rings, high-speed DMA
* paths and start the network device queue.
*
* Note we enable the DMA paths last to make sure we have primed
* the Rx ring before any incoming packets are allowed to
* arrive.
*/
Teardown was never updated to match, so the rings and the paths now come
down in the same order they go up instead of in reverse.
On an ASMedia ASM4242 host router the 'pending' bit then never clears:
every teardown burns the full 500 ms timeout and
__tb_path_deactivate_hop() returns -ETIMEDOUT. Raising the timeout to
5 s does not help, so the hop is not slow to drain, it never drains
at all.
The failure is invisible above the thunderbolt core.
__tb_path_deactivate_hops() is void and only calls tb_port_warn();
tb_path_deactivate(), tb_tunnel_deactivate() and
__tb_disconnect_xdomain_paths() are void as well, and
tb_disconnect_xdomain_paths() ends in an unconditional "return 0". So
tb_xdomain_disable_paths() reports success and the netdev_warn() below
it never fires. Repeated teardowns eventually take the XDomain control
channel down, after which the peer node is gone and only a power cycle
brings the controller back.
Deactivating the paths first fixes it. Measured with kretprobes on a
stock v6.17 tree with no other patches applied, on a link that was up
and had just carried traffic:
before: __tb_path_deactivate_hop() returns 0 for the first hop, then
-ETIMEDOUT for the second 500335 us later
after: 0 for both, 525 us apart
Alternating the two orderings ABBA over three load levels, four
teardowns per arm: every teardown failed before the change (21 of 21
that ran), none failed after (0 of 24). The before arms ran short
because the link died partway through. The same split shows up when
the interface is enslaved to a bond instead of just brought down, which
is how I ran into this in the first place. Throughput and latency after
the change are unchanged.
Hosts whose routers drain the hop despite the stale descriptor base see
no functional difference, since the paths end up deactivated either way.
Fixes: e69b6c02b4 ("net: Add support for networking over Thunderbolt cable")
Signed-off-by: Fan XinRan <shinjiangjiang@gmail.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://patch.msgid.link/20260803-b4-tbnet-teardown-v2-1-27de6a13ca2d@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In function otx2_get_egress_burst_cfg, when the parameter `burst` is
255 and the max mantissa is 255 (0xFFULL), `burst_exp` is set to
`ilog2(255) - 1`, which equals 6.
This results in an unsigned wrap-around when calculating
`(1ULL << (*burst_exp - 7))`, since `*burst_exp - 7` becomes -1,
which makes the shift operand 0xFFFFFFFF. This value is greater than
the width of the left operand.
According to standard 6.5.7 p.3:
"The type of the result is that of the promoted left operand.
If the value of the right operand is negative or is greater than
or equal to the width of the promoted left operand, the behavior
is undefined."
Fix the off-by-one boundary condition.
Add a WARN_ON(*burst_exp < 7) before the else branch as an
explicit safeguard. This ensures that if max_mantissa ever changes
in a way that reintroduces this condition, it will be immediately
caught at runtime rather than silently triggering UB.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: e638a83f16 ("octeontx2-pf: TC_MATCHALL egress ratelimiting offload")
Signed-off-by: Sergey V. Frolov <Sergey.V.Frolov@kaspersky.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Sunil Goutham <sgoutham@marvell.com>
Link: https://patch.msgid.link/20260804120446.1955448-1-Sergey.V.Frolov@kaspersky.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
MTK_GPHY_LED_TX_BLINK_SET and MTK_2P5GPHY_LED_TX_BLINK_SET are built
from the RX blink bits instead of the TX ones, so both TX masks are
identical to their RX counterparts. The TX bits they should be using,
MTK_PHY_LED_BLINK_{10,100,1000,2500}TX, are otherwise only referenced
by the per-speed branch of mtk_phy_led_hw_ctrl_set().
A TX trigger selected without a link trigger therefore programs the RX
blink bits, and the LED blinks on received traffic. The masks are also
used to decode the blink register in mtk_phy_led_hw_ctrl_get(), which
as a result cannot tell the two triggers apart: an RX-only
configuration reads back as RX and TX, and a TX-only configuration
reads back as neither.
Fixes: 7f9c320c98 ("net: phy: mediatek: Move LED helper functions into mtk phy lib")
Cc: stable@vger.kernel.org
Signed-off-by: Ahmed Naseef <naseefkm@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260804113511.3371248-1-naseefkm@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The commit 4f61f133f3 ("net: tap: NULL pointer derefence in
dev_parse_header_protocol when skb->dev is null") fixed a crash in
tap_get_user() by assigning skb->dev before calling tun_vnet_hdr_to_skb().
This is required because virtio_net_hdr_to_skb() may invoke
dev_parse_header_protocol(), which dereferences skb->dev. Without the
assignment, a NULL pointer dereference can occur.
However, tap_get_user_xdp() still parses the virtio-net header before
assigning skb->dev. When the vhost TX path passes an XDP buffer containing
a GSO virtio-net header but the protocol is set to zero on purpose,
tun_vnet_hdr_to_skb() can reach dev_parse_header_protocol() while skb->dev
is still NULL, resulting in a crash.
Fix this by looking up the tap device and assigning skb->dev before calling
tun_vnet_hdr_to_skb(), matching the ordering already used in
tap_get_user(). Preserve the existing RCU read-side critical section across
dev_queue_xmit().
Fixes: 924a9bc362 ("net: check if protocol extracted by virtio_net_hdr_set_proto is correct")
Cc: stable@vger.kernel.org
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20260802224612.264563-1-dongli.zhang@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The existing driver logic is always turning on PTP_CLK_REQ_PPS
regardless of the "on" parameter passed to bnxt_ptp_enable().
During shutdown, PTP_CLK_REQ_PPS may be turned off and this
bug will do the opposite and may trigger a PCIe PTM request TLP.
On some systems this can trigger a PCIe AER.
Fix it by properly configuring PTP_CLK_REQ_PPS based on the "on"
parameter.
Fixes: 9e518f2580 ("bnxt_en: 1PPS functions to configure TSIO pins")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Keegan Freyhof <keegan.freyhof@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260731190937.807270-6-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
EOP (End of frame padding) on the AGG ring may cause overlapping of
zero padding at the end of one segment with the next segment's data.
If Relaxed Ordering (RO) is enabled, the zero padding may overwrite
valid data in the next segment and corrupt the data. Older chips
(P5 and older) do not automatically disable RO when EOP is enabled.
On some ARM systems, data corruption was reported on 57508 (P5)
chips with RO enabled.
Always disable EOP on all chips on the AGG rings when TPA is enabled
to fix the data corruption.
Fixes: bfcd8d791e ("bnxt_en: Add fast path logic for TPA on 57500 chips.")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260731190937.807270-5-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Each VNIC has a default RX ring. The purpose of the default RX ring
is to provide a destination for any packets that cannot be parsed by
the RSS logic. Up until now, the default RX ring is always Ring 0.
We neglected to take care of this default RX ring when adding the
queue restart feature. If ring 0 (default ring) is re-started, it
may now have a new FW ring ID after freeing the old one and
allocating a new one. The VNIC now may have a stale default ring
and it may generate an internal exception. This exception may
appear in dmesg:
FW reported unknown error type 10
The best way to resolve this issue is to use a more appropriate
ring for the default ring instead of always ring 0. Ring 0 may not
even be in the RSS table, especially on a new RSS context.
This patch adds the logic to determine and store the proper default
RX ring for a VNIC. For an RSS VNIC, the default ring is the lowest
ring number in the RSS table. The next patch will add proper logic
to update the VNIC if the default ring changes after queue restart.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Shravya KN <shravya.k-n@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260731190937.807270-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5e_queue_start() deactivates and re-activates all channels but closes
only the queue being restarted. mlx5e_activate_txqsq() then
unconditionally calls netdev_tx_reset_queue(), zeroing the BQL counters
of channels that kept their in-flight TX WQEs. The next completion then
over-charges and trips the BUG_ON() in dql_completed():
kernel BUG at lib/dynamic_queue_limits.c:99!
RIP: 0010:dql_completed+0x23d/0x280
Call Trace:
<IRQ>
mlx5e_poll_tx_cq+0x668/0xa60
mlx5e_napi_poll+0x5b/0x7b0
net_rx_action+0x15a/0x580
Reset BQL only when the SQ has no bytes in flight (sq->cc == sq->pc).
In the case that reset is skipped, the outstanding WQEs will eventually
complete and rebalance the dql. The dql->limit is carried across the
reset.
Fixes: b2588ea40e ("net/mlx5e: Implement queue mgmt ops and single channel swap")
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260803-mlx5-bql-v3-1-a30d4c66fe1d@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bnge_fix_rings_count() returns 0 on success or a negative errno on failure
However, bnge_adjust_rings() stores its return value in a u16 variable,
causing negative error codes such as -ENOMEM to be converted to a large
positive value.
Use an int for the return code variable so that error values are
preserved and propagated correctly.
Fixes: 627c67f038 ("bng_en: Add resource management support")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Link: https://patch.msgid.link/20260801100923.1498570-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
aq_ring_rx_deinit() only walks [sw_head, sw_tail), the region posted to
hardware. Since the page reuse strategy was added, a cleaned RX buffer
keeps its page (and its DMA mapping) in the ring for reuse, and refill
is batched: aq_ring_rx_fill() returns early until AQ_CFG_RX_REFILL_THRES
slots are free. Slots that were consumed but not yet reposted therefore
sit in the complementary [sw_tail, sw_head) gap with a live page, and
the deinit walk never visits them: up to a refill batch worth of pages
and DMA mappings leak on every interface down.
Walk the whole ring instead and release whatever is still there. Also
bail out if the buffer ring is already gone: a partial
aq_ptp_ring_alloc() failure frees the ring but leaves aq_nic set, so
aq_ptp_ring_deinit() still gets here on the unwind path.
Cc: stable@vger.kernel.org # v5.2+
Fixes: 46f4c29d9d ("net: aquantia: optimize rx performance by page reuse strategy")
Reviewed-by: Sukhdeep Singh <sukhdeeps@marvell.com>
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Acked-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/tencent_607CBA8237DA438E36B844318B21538DE008@qq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
aq_vec_deinit() drains the TX rings with a single aq_ring_tx_clean()
call, which frees at most AQ_CFG_TX_CLEAN_BUDGET (256) descriptors and
stops at hw_head, which no longer moves once aq_vec_stop() has stopped
the hardware and NAPI. Completed descriptors beyond the budget and
everything still posted in [hw_head, sw_tail) keep their skb or
xdp_frame when the interface goes down: aq_vec_ring_free() then frees
the buffer ring and the references are lost for good.
Today this is a silent memory leak on every interface down under
TX/XDP_TX load. With the conversion of the RX path to page_pool posted
for net-next it becomes much more visible: XDP_TX frames carry fragment
references on the RX ring's page_pool, so a single stranded frame keeps
the pool's inflight count above zero forever. page_pool_destroy() then
never completes, the pool is leaked together with its pages, and
"page_pool_release_retry() stalled pool shutdown" is warned every 60
seconds from that point on, on every ifdown, XDP detach or ring resize
under XDP_TX load.
Bring back aq_ring_tx_deinit() as it was before the removal and use it
for teardown again, with one extension: TX rings can hold xdp_frames
nowadays, so release those too. They are returned with
xdp_return_frame() since this runs in process context.
Fixes: eb36bedf28 ("net: aquantia: remove function aq_ring_tx_deinit")
Cc: stable@vger.kernel.org # v4.11+
Reviewed-by: Sukhdeep Singh <sukhdeeps@marvell.com>
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Acked-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/tencent_EEDC35FAF2750A3A6A0B39BAE0E2C484860A@qq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since the referenced commit, changing the MTU on a running interface no
longer disconnects and reconnects the PHY; __stmmac_release() merely
stops phylink, which also suspends the PHY (BMCR power-down) when WoL
is not enabled. __stmmac_open() then performs the DMA software reset in
stmmac_hw_setup() before phylink_start() resumes the PHY again.
IEEE 802.3 22.2.4.1.5 allows a PHY to stop its receive clock while
powered down, and stmmac requires a running receive clock for the DMA
software reset to complete (the phylink config sets mac_requires_rxc).
On such setups, e.g. the RK3566-based Home Assistant Green with an
RTL8211F-VD PHY in RGMII mode, any runtime MTU change now times out and
leaves the interface dead:
rk_gmac-dwmac fe010000.ethernet end0: Failed to reset the dma
rk_gmac-dwmac fe010000.ethernet end0: stmmac_hw_setup: DMA engine initialization failed
rk_gmac-dwmac fe010000.ethernet end0: __stmmac_open: Hw setup failed
rk_gmac-dwmac fe010000.ethernet end0: failed reopening the interface after MTU change
In the field this is triggered by NetworkManager applying an MTU while
activating the connection, breaking networking entirely. The same
regression has also been reported on i.MX8MP and reproduced on SoCFPGA
based systems.
Resume the PHY in __stmmac_open() before the hardware setup, making it
the counterpart of the phylink_stop() in __stmmac_release(), like
stmmac_resume() already does for the same reason. phylink_start() also
resumes the PHY, but only after stmmac_hw_setup(), and it cannot be
moved before the hardware setup since it may bring the link up
immediately from a workqueue, racing with the initialization (see the
comment in stmmac_resume()). For the regular ndo_open path the PHY has
just been attached and is not suspended, in which case
phylink_prepare_resume() does nothing.
Fixes: db299a0c09 ("net: stmmac: move PHY handling out of __stmmac_open()/release()")
Link: https://github.com/home-assistant/operating-system/issues/4858
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260803095156.132827-1-stefan@agner.ch
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Antonio Quartulli says:
====================
Included fixes:
* use rcu_dereference_bh() instead of rcu_access_pointer() where the
pointer is actually dereferenced
* ensure TCP global variables are initialized before they can be
accessed via netlink (e.g. when attaching a TCP socket)
* actually disable IPv4 redirects on multipeer interfaces (the
previous attempt was a no-op and did not survive netns moves)
* hash a floated peer by its transport identity only, consistently
with the add and lookup paths
* zero the sockaddr padding before learning a floated endpoint so it
does not leak into the by_transp_addr hash key
* ensure the socket is owned by ovpn before dereferencing
sk_user_data
* rehash a peer in the by_transp_addr table when its remote endpoint
is updated via CMD_PEER_SET
* avoid re-adding to the hashtables a peer that was concurrently
removed (use-after-free)
* limit keepalive values to one day to avoid overflowing the
delayed-work delay on 32-bit systems
* add the missing rtnl_link_ops->get_size callback so link messages
account for the nested mode attribute
* tag 'ovpn-net-20260730' of https://github.com/OpenVPN/ovpn-net-next:
ovpn: fix incorrect use of rcu_access_pointer()
ovpn: ensure TCP vars are initialized first
ovpn: disable IPv4 redirects on MP interfaces
ovpn: hash floated peer by transport identity only
ovpn: zero-initialize sockaddr before learning a floated endpoint
ovpn: ensure socket is owned by ovpn before deref sk_user_data
ovpn: rehash peer in by_transp_addr table on CMD_PEER_SET
ovpn: skip rehash for peers already removed from by_id
ovpn: limit keepalive values to one day
ovpn: add missing rtnl_link_ops->get_size callback
====================
Link: https://patch.msgid.link/20260730094624.4102963-1-antonio@openvpn.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If allocation of auxr_dev fails during auxiliary device setup, the error
path calls auxiliary_device_uninit(), which eventually invokes
bnge_aux_dev_release().
The release callback unconditionally dereferences aux_priv->auxr_dev->pdev
to retrieve the parent bnge_dev. Since auxr_dev has not yet been allocated
on this failure path, the dereference results in a NULL pointer exception
Retrieve the parent bnge_dev from the auxiliary device's parent instead of
auxr_dev, and free auxr_dev only when it was successfully allocated. This
allows the release callback to correctly clean up partially initialized
auxiliary devices.
Fixes: 8ac050ec3b ("bng_en: Add RoCE aux device support")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Link: https://patch.msgid.link/20260731192301.1427645-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the interface has NETIF_F_SG enabled and skb_linearize() fails in
ax88179_tx_fixup(), the function returns NULL without freeing the skb.
usbnet_start_xmit() treats a NULL return from tx_fixup() as a drop
(info->flags does not set FLAG_MULTI_PACKET for this driver), jumping
to the "drop" label where it does `if (skb) dev_kfree_skb_any(skb)`.
Because tx_fixup() returned NULL, the local skb variable in
usbnet_start_xmit() is NULL, so the original skb is never freed — a
memory leak on every TX frame whose linearization fails (i.e. under
memory pressure).
Free the skb before returning, matching the error handling already used
for the pskb_expand_head() failure path in the same function.
Fixes: 16b1c4e01c ("net: usb: ax88179_178a: add TSO feature")
Cc: stable@vger.kernel.org
Signed-off-by: Yi Cong <yicong@kylinos.cn>
Link: https://patch.msgid.link/20260729030436.3420477-1-cong.yi@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The zero-copy path validates TX metadata while obtaining the descriptor
context, then reads it again later when preparing the hardware request.
User space can change the metadata between those operations and bypass the
original validation.
Validate the metadata in xsk_tx_metadata_request() and use the resulting
flags snapshot for every feature check. Read request fields once so all
zero-copy drivers process only values observed after successful
validation.
Fixes: ca4419f15a ("xsk: Add launch time hardware offload support to XDP Tx metadata")
Cc: Cen Zhang (Microsoft) <blbllhy@gmail.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260727161959.885642-7-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Completion handling needs to know whether a timestamp was requested when
the metadata was processed. Let xsk_tx_metadata_request() update the
caller's metadata pointer so that decision can be carried forward without
rereading user-controlled flags.
This only changes the interface; behavior remains unchanged.
Fixes: ca4419f15a ("xsk: Add launch time hardware offload support to XDP Tx metadata")
Cc: Cen Zhang (Microsoft) <blbllhy@gmail.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260727161959.885642-3-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a small memory leak in bnxt_queue_mem_alloc:
when bnxt_alloc_rx_agg_bmap() succeeds
but bnxt_alloc_one_tpa_info() later fails,
the rx_agg_bmap allocated by bnxt_alloc_rx_agg_bmap()
is not freed in the fallthrough cleanup cases.
Free the rx_agg_bmap in the err_free_rx_agg_ring case
and initialize clone->rx_agg_bmap = NULL earlier in the function
to allow for safe fallthrough.
Fixes: bd649c5cc9 ("bnxt_en: handle tpa_info in queue API implementation")
Signed-off-by: Will Chen <will.chen.tty@gmail.com>
Reviewed-by: Joe Damato <joe@dama.to>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260729220132.1256924-1-will.chen.tty@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When host is powered off, firmware does not send vhca_state event
for every probed host SF on the DPU because it may have deployed
thousands of SFs to the host. Instead it sends a function changed
event. Currently, only VFs handle this event. This commit extends
support to SFs.
When DPU user deactivates[1] SFs, mlx5 expects vhca_state event
and leaves the SF in dangling state[2].
When DPU user deletes[3] SFs, mlx5 also expects vhca_state event
and destroys the SF resources[4].
Fix it by changing SF to the right state and freeing SF resources
when the function changed event is received.
When this event is received, driver checks all SF states.
- If state is in_use, change it to active.
- If state is teardown_request, change it to allocated.
And SF hardware table entry is freed if it is pending for delete.
[1]
# devlink port function set en3f0c1pf0sf0 state inactive
[2]
# devlink port function set en3f0c1pf0sf0 state active
Error: mlx5_core: SF is inactivated but it is still attached.
kernel answers: Device or resource busy
[3]
# devlink port show
pci/0000:03:00.0/229376: type eth netdev en3f0c1pf0sf0 \
flavour pcisf controller 1 pfnum 0 sfnum 0 splittable false
function:
hw_addr 00:00:00:00:00:00 state active opstate attached \
roce enable trust off max_uc_macs 4096 max_io_eqs 8
# devlink port del en3f0c1pf0sf0
[4]
# devlink port add pci/0000:03:00.0 flavour pcisf pfnum 0 sfnum 0 \
controller 1
Error: mlx5_core: SF already exist. Choose different sfnum.
kernel answers: File exists
Fixes: 6a32732174 ("net/mlx5: SF, Port function state change support")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260729071622.2423270-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
hix5hd2_dev_remove() calls netif_napi_del() before unregister_netdev().
This is not needed because free_netdev() deletes all NAPI instances
attached to the net_device.
Remove the redundant call and let the networking core tear down the NAPI
instance during unregister_netdev(). The probe error path still keeps its
explicit netif_napi_del(), because the device has not been registered
there.
Fixes: 57c5bc9ad7 ("net: hisilicon: add hix5hd2 mac driver")
Signed-off-by: Jiawen Liu <1298662399@qq.com>
Link: https://patch.msgid.link/tencent_5FFD37A252B4FEA6A80AD25B17C8E904F005@qq.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pdsc_check_pci_health() queues pci_reset_work when it sees a broken PCI
connection, and nothing cancels it. When the PCI core starts AER
recovery, pdsc_pci_error_detected() runs pdsc_reset_prepare() and
recovers the device, but a pci_reset_work queued just before is left
pending. If it runs after recovery released the device lock, it resets a
device the driver now considers healthy, bouncing the link for no reason.
Cancel pci_reset_work in pdsc_pci_error_detected() after
pdsc_reset_prepare(), which has already stopped the health thread so it
cannot requeue the work. cancel_work_sync() is safe under the device
lock here because pdsc_pci_reset_thread() uses pci_try_reset_function(),
which returns instead of blocking on the lock. Only PFs initialize
pci_reset_work, so guard the cancel with !is_virtfn.
Fixes: 81665adf25 ("pds_core: Fix pdsc_check_pci_health function to use work thread")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260714180223.1642792-2-nikhil.rao%40amd.com?part=1
Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260727170030.361116-1-nikhil.rao@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit d9407ff118 ("pds_core: Prevent health thread from running
during reset/remove") stops the health thread with cancel_work_sync()
before a reset, but a devcmd timeout during pdsc_fw_down() re-queues
health_work, so pdsc_health_thread() runs again mid-reset and double
allocates the core DMA queues via pdsc_fw_up().
Only the reset path is affected: on remove PDSC_S_STOPPING_DRIVER gates
the health thread and the workqueue is destroyed.
Use disable_work_sync() to cancel health_work and block further
queue_work() on it, and enable_work() in pdsc_restart_health_thread() to
re-allow it after the reset.
disable_work_sync() keeps a disable depth, so every disable must be
matched by one enable. pdsc_reset_prepare() stops the health thread and
pdsc_reset_done() restarts it. On the AER path pdsc_pci_error_detected()
calls pdsc_reset_prepare(), then pdsc_pci_error_resume() re-inits via
pci_reset_function_locked() (pds_core has no .slot_reset handler), which
runs the pair again - stopping the thread twice but restarting it once.
Gate the disable and enable on a health_stopped flag so each fires at
most once per stopped/running transition.
Fixes: d9407ff118 ("pds_core: Prevent health thread from running during reset/remove")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260629200358.2626129-1-nikhil.rao%40amd.com?part=2
Signed-off-by: Nikhil P. Rao <nikhil.rao@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260727164548.359562-1-nikhil.rao@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case __mlx5e_add_fdb_flow() fails in lower levels, the flow is
deleted via mlx5e_tc_del_flow(), and mlx5e_tc_del_flow() is acquiring
ESW devcom lock without condition. In addition, in case of peer_flow,
__mlx5e_add_fdb_flow() is called while holding ESW devcom comp lock.
This results in an AA deadlock.
To fix this, introduce a new PEER flag that is set on flows created as
peer flows (the duplicate flows on peer devices), and check it in
mlx5e_tc_del_flow() before acquiring ESW devcom lock.
Lockdep splat:
============================================
WARNING: possible recursive locking detected
============================================
Possible unsafe locking scenario:
CPU0
----
lock(&comp->lock_key#2);
lock(&comp->lock_key#2);
*** DEADLOCK ***
Call Trace:
<TASK>
dump_stack_lvl+0x69/0xa0
print_deadlock_bug.cold+0xbd/0xca
__lock_acquire+0x1671/0x2ec0
lock_acquire+0x10e/0x2e0
down_read+0x95/0x430
mlx5_devcom_for_each_peer_begin+0x4e/0xe0 [mlx5_core]
mlx5e_tc_del_flow+0x11d/0xa70 [mlx5_core]
mlx5e_flow_put+0x99/0x100 [mlx5_core]
__mlx5e_add_fdb_flow+0x409/0xf00 [mlx5_core]
mlx5e_configure_flower+0x2a86/0x4100 [mlx5_core]
mlx5e_rep_setup_tc_cls_flower+0x12f/0x1b0 [mlx5_core]
mlx5e_rep_setup_tc_cb+0x153/0x750 [mlx5_core]
tc_setup_cb_add+0x1dc/0x470
fl_change+0x2f4d/0x626d [cls_flower]
tc_new_tfilter+0x79b/0x2310
rtnetlink_rcv_msg+0x778/0xad0
do_syscall_64+0x70/0x960
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
Fixes: 04de7dda73 ("net/mlx5e: Infrastructure for duplicated offloading of TC flows")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260728044338.2271143-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
enic_remove() cancels the reset and change_mtu_work items but does not
cancel tx_hang_reset. A TX timeout that fires while the device is being
removed can schedule enic_tx_hang_reset() so that it runs after
free_netdev(), resulting in a use-after-free.
cancel_work_sync() alone is not sufficient here: the still-live watchdog
and notify paths can re-schedule these work items in the window between
the cancel and unregister_netdev(). Use disable_work_sync(), which
cancels the work and blocks any subsequent schedule_work() from
requeuing it, and apply it to the reset and change_mtu_work items as
well so the same requeue race is closed for all teardown work.
Fixes: 937317c7c1 ("enic: do hang reset only in case of tx timeout")
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Link: https://patch.msgid.link/20260728062730.2394873-1-satishkh@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bond_alb_monitor() reads primary_is_promisc under RCU, then drops RCU and
takes RTNL via rtnl_trylock() before undoing the promiscuity it set on the
active slave. In that window the active slave can change under RTNL
(RTM_DELLINK -> __bond_release_one() -> bond_alb_handle_active_change()),
which already drops the promiscuity and clears primary_is_promisc. The
monitor still acts on the stale decision: if the slave was removed with no
failover, curr_active_slave is now NULL and the deref faults; if it failed
over, the stale dev_set_promiscuity(-1) underflows the new slave's
promiscuity counter and pins it in IFF_PROMISC.
Oops: general protection fault, probably for non-canonical address ...
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
Workqueue: b42 bond_alb_monitor
RIP: 0010:bond_alb_monitor (drivers/net/bonding/bond_alb.c:1600)
process_one_work (kernel/workqueue.c:3322)
worker_thread (kernel/workqueue.c:3486)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
Kernel panic - not syncing: Fatal exception
Re-check primary_is_promisc (and curr_active_slave) after taking RTNL so
the monitor only undoes an increment it still owns. The other bonding
monitors already re-read state under RTNL in their commit phase
(bond_miimon_commit/bond_ab_arp_commit); bond_alb_monitor() was the only
one acting on the pre-trylock decision.
Fixes: d0e81b7e22 ("bonding: Acquire correct locks in alb for promisc change")
Reported-by: AutonomousCodeSecurity@microsoft.com
Signed-off-by: Xiang Mei (Microsoft) <xmei5@asu.edu>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Link: https://patch.msgid.link/20260725233930.2957317-1-xmei5@asu.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit a8065af334.
Per the USB4 spec, a Transmit Descriptor Ring with E2E flow control
disabled does not require any credits to be available before the Host
Interface Adapter Layer transmits a tunneled packet from it. Once E2E is
enabled on that ring the controller must first obtain end-to-end
credits.
The ASMedia ASM4242 USB4 host router (PCI 1b21:2425) never delivers
those credits. The controller does accept the configuration: reading the
ring OPTIONS register back right after tb_ring_start() returns exactly
what was written, including RING_FLAG_E2E_FLOW_CONTROL (bit 28) and the
E2E HopID field. No credit ever arrives though, so the Tx ring's
hardware consumer index never advances and the link carries no traffic
at all.
Measured on two hosts connected point to point, onboard ASM4242 on MSI
X870E and X870, v6.17, stock drivers/net/thunderbolt/main.c with only
this revert applied on top:
before: 100% packet loss to the peer; thunderbolt0 is up and the
XDomain handshake completes ("new host found"), but iperf3
fails with "No route to host" once the neighbour entry
expires
after: 0% packet loss, 0.28 ms RTT; iperf3 4.21 Gb/s one way and
5.17 Gb/s the other (5 runs each, stddev <= 0.02), 1
retransmit in 10 s
An instrumented build additionally showed a frozen-Tx-consumer watchdog
firing ~30k times in a 10 s window before this change.
Rx-side E2E is not touched by this revert, so peers that do return
credits keep receive-side flow control.
ASMedia does not look like an isolated case. The out-of-tree
thunderbolt-ibverbs project disables native E2E on AMD NHI by default,
noting that "Strix Halo has reproduced TX completion wedges with
multiple native E2E rings active" -- the same failure mode, on a
different vendor. Since the driver has no way to tell in advance which
host router returns the credits, going back to the previous behaviour
looks safer than adding a quirk per affected part; Tx-side E2E can be
reintroduced as an opt-in for controllers that are known to implement
the credit return.
Note that the reverted commit was not fixing a reported problem, it was
derived from the spec wording alone, so this revert is not expected to
regress a known workload. Cc'ing the original author in case there was
one.
Fixes: a8065af334 ("net: thunderbolt: Enable end-to-end flow control also in transmit")
Cc: zhangjianrong <zhangjianrong5@huawei.com>
Signed-off-by: Fan Ye <fy15309206903@gmail.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://patch.msgid.link/20260727123002.25225-1-fy15309206903@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After setting a 100G optical port to 40G via ethtool and reloading
the driver, the port remains at 40G instead of reverting to the
firmware default speed of 100G.
The commit referenced in Fixes: added two overwrites in
hclge_init_ae_dev() for non-copper media, so that optical ports
connected to forced-mode remotes inherit the firmware-preset
autoneg and speed instead of the hardcoded defaults:
req_autoneg = mac.autoneg
req_speed = mac.speed (when autoneg disabled)
The autoneg overwrite keeps existing behavior:
hclge_set_autoneg_speed_dup() already uses mac.autoneg (not
req_autoneg) since it was introduced, so autoneg inheritance from
firmware was already in place. This part is kept.
The speed overwrite, however, introduces the residue: mac.speed
reflects whatever was last programmed into the MAC, and after unload
firmware does not restore the MAC speed to the flash default. So if
the user changed speed via ethtool in a prior load, mac.speed still
carries that value on reload and req_speed inherits it.
Fix by dropping the req_speed overwrite only. req_speed keeps the
firmware default value set in hclge_configure() (cfg.default_speed),
so a reload reverts the speed to default, matching the expectation
that a driver reload resets link configuration.
Trade-off: on optical ports whose firmware default speed does not
match a forced-mode remote, reload now drops the link and the user
must re-apply ethtool configuration. This is acceptable: a driver
reload is expected to reset link configuration, not to inherit
runtime state from before unload. The autoneg inheritance is left
in place as established behavior; changing it is out of scope for
this patch and would itself be a user-perceivable behavior change.
Fixes: d9d349c4e8 ("net: hns3: differentiate autoneg default values between copper and fiber")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260724093036.426631-1-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A TX timeout on a qede NIC that has VXLAN/GENEVE tunnel ports
configured wedges the rtnetlink control plane of the whole machine:
NETDEV WATCHDOG: ens6f1 (qede): transmit queue 2 timed out 10226 ms
[qede_tx_timeout:586(ens6f1)]TX timeout on queue 2!
[qede_recovery_handler:2665(ens6f0)]Starting a recovery process
The recovery path deadlocks on the driver's own mutex:
qede_sp_task
rtnl_lock()
mutex_lock(&edev->qede_lock) <- taken
qede_recovery_handler
qede_load
udp_tunnel_nic_reset_ntf
__udp_tunnel_nic_device_sync
info->sync_table == qede_udp_tunnel_sync
mutex_lock(&edev->qede_lock) <- same task: deadlock
The mutex is not recursive, so the kworker blocks on itself with
rtnl_lock held, and neither lock is ever released. Every task that
calls rtnl_lock() afterwards (ip, ovs-vswitchd, lldpad, IPv6
addrconf, sshd) blocks forever while the node still answers ping.
In a vmcore from an affected production node rtnl_mutex.owner
decodes to the very kworker blocked at the innermost mutex_lock()
above.
Re-sync the tunnel ports from qede_sp_task() after the internal lock
is dropped, still under rtnl_lock as the udp_tunnel API requires.
This mirrors qede_open(), which calls udp_tunnel_nic_reset_ntf()
under rtnl without the internal lock.
qede_recovery_handler() now returns whether it has successfully
reloaded an open device, and the caller re-syncs the ports only in
that case. This keeps the old gating exactly: a device that was down
or a failed recovery returns false, as those paths never reached the
udp_tunnel_nic_reset_ntf() call before either.
This was the only user of the qede_lock()/qede_unlock() helpers, so
remove them.
Fixes: 8cd160a294 ("qede: convert to new udp_tunnel_nic infra")
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Andrew Lunn <andrew+netdev@lunn.ch>
CC: "David S. Miller" <davem@davemloft.net>
CC: Eric Dumazet <edumazet@google.com>
CC: Jakub Kicinski <kuba@kernel.org>
CC: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260726104311.1782900-1-den@openvz.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Marc Kleine-Budde says:
====================
pull-request: can 2026-07-29
this is a pull request of 20 patches for net/main.
The first 2 patches fix problems in the CAN J1939 protocol and are by
Tetsuo Handa and Oleksij Rempel.
The next 2 patches fix problems in the CAN ISOTP protocol and are by
Oliver Hartkopp and Minhong He.
Avi Weiss contributes contributed 4 fixes for the ctucanfd, Pengpeng
Hou's patch adds a missing MODULE_DEVICE_TABLE.
The patches for the peak_usb driver are contributed by James Gao,
Maoyi Xie, Maoyi Xie and add sanity checks for the USB bulk data
parsing and fix a double free.
2 fixes for the kvaser_usb driver are provided by Abdun Nihaal and
Pengpeng Hou, a mem leak is fixed and sanity checks for the USB bulk
data parsing.
Tu Nguyen's patch for the rcar_canfd driver fixes the initializing
flow.
Pengpeng Hou contributes a patch for the softing driver to validate
the firmware record spans.
Lucas Martins Alves's patch for the c_can driver keeps the controller
in init mode until configuration is complete.
A patch by my add missing URB resubmission on skb allocation failure
to the gs_usb driver.
Guangshuo Li's patch for the etas_es58x driver fixes a RX buffer leak.
The last patch is by Pengpeng Hou and adds sanity checks to the USB
bulk data parsing of the ems_usb driver.
linux-can-fixes-for-7.2-20260729
* tag 'linux-can-fixes-for-7.2-20260729' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: ems_usb: validate CPC message lengths
can: etas_es58x: es58x_read_bulk_callback(): fix RX buffer leak on URB resubmit failure
can: gs_usb: gs_usb_receive_bulk_callback(): resubmit URB on skb allocation failure
can: c_can: c_can_chip_config(): keep controller in init mode until bittiming is configured
can: softing: fw_parse(): validate firmware record spans
can: rcar_canfd: change the initializing flow for clocks and resets
can: kvaser_usb_leaf: kvaser_usb_leaf_wait_cmd(): validate received command extents
can: kvaser_usb: kvaser_usb_hydra_get_busparams(): fix memory leak in kvaser_usb_hydra_get_busparams()
can: peak_usb: validate uCAN receive record lengths
can: peak_usb: peak_usb_start(): fix double free of transfer buffer on URB submit error
can: peak_usb: add bounds check for USB channel index
can: ctucanfd: add missing MODULE_DEVICE_TABLE()
can: ctucanfd: use self-test mode for PRESUME_ACK
can: ctucanfd: handle bus error interrupts
can: ctucanfd: mark error-active controller status valid
can: ctucanfd: unmap BAR0 using base address
can: isotp: check register_netdevice_notifier() error in module init
can: isotp: fix timer drain order, wakeup handling and tx_gen ordering
can: j1939: transport: j1939_session_fresh_new(): initialize receive buffer
can: j1939: use netdevice_tracker for j1939_{priv,session,ecu} tracking
====================
Link: https://patch.msgid.link/20260729102802.505168-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When TX VLAN hardware offload is disabled, VLAN tags are embedded in
the packet payload (software VLAN). Previously, the driver failed to
set the WX_TX_FLAGS_SW_VLAN flag for these packets during transmission.
This missing flag caused the txgbe FDIR ATR logic to fall through to the
default hash calculation path. This resulted in asymmetric hash values
for Tx and Rx flows, preventing return packets from being steered to the
same queue as the transmit packets.
Fix this by detecting software VLANs via eth_type_vlan(skb->protocol)
and setting WX_TX_FLAGS_SW_VLAN. This ensures the ATR feature selects
the correct hashing algorithm to maintain Tx/Rx queue symmetry.
Fixes: b501d261a5 ("net: txgbe: add FDIR ATR support")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/0879DA38A8E32701+20260724074657.10773-1-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
rcu_access_pointer() should only be used to test the value of a pointer,
not to dereference it. As it's in a spin_lock_bh() critical section, use
rcu_dereference_bh() instead, avoiding an extra rcu_read_lock().
Fixes: f6226ae7a0 ("ovpn: introduce the ovpn_socket object")
Signed-off-by: Qingfang Deng <qingfang.deng@linux.dev>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Netlink calls may access TCP global vars (i.e. when attaching
a TCP socket), therefore we need to make sure the
latters are initialized beforehand.
For this reason move the global TCP initialization at the top
of the module init function.
Fixes: 11851cbd60 ("ovpn: implement TCP transport")
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
ovpn_mp_alloc() tried to disable SEND_REDIRECTS on a multipeer
interface, but it runs from ovpn_net_init() (->ndo_init), which
register_netdevice() invokes before the NETDEV_REGISTER notifier
chain. The IPv4 in_device is only created when that notifier reaches
inetdev_event() -> inetdev_init(), so __in_dev_get_rtnl() always
returned NULL at ndo_init time and the whole redirect-disabling block
(both the per-device and the per-netns IPV4_DEVCONF_ALL write) was
dead. MP interfaces therefore kept emitting ICMP redirects.
Disabling redirects only once is not enough either: the IPv4
in_device is destroyed and recreated when the interface is moved to a
different network namespace (NETDEV_UNREGISTER/NETDEV_REGISTER), and
the newly created in_device inherits the destination namespace
defaults, silently re-enabling SEND_REDIRECTS.
Disable redirects from ovpn_net_open() (->ndo_open) instead: it runs
every time the interface is brought up, including after the in_device
has been recreated, so the setting is always re-applied. This mirrors
what wireguard does in wg_open(). RTNL is held on the ndo_open() path,
so __in_dev_get_rtnl() is safe.
Fixes: 05003b408c ("ovpn: implement multi-peer support")
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
The by_transp_addr table is keyed on the peer's remote transport
address, but the float rehash hashed bind->remote directly, while the
two other sites that touch the table build a clean key first:
ovpn_peer_add_mp() and the lookup in ovpn_peer_get_by_transp_addr()
both hash a sockaddr holding only family/address/port.
For a link-local IPv6 peer, bind->remote carries sin6_scope_id (set
from ipv6_iface_scope_id() when the endpoint is learned), and that
field is folded into the jhash() over sizeof(struct sockaddr_in6).
The lookup never sets sin6_scope_id, so after such a peer floats it is
rehashed into a scope_id-dependent bucket that lookups (scope_id 0)
never visit, making the peer unreachable through the by_transp_addr
fallback. ovpn_peer_transp_match() only compares address and port, so
the hash was keying on a field the match ignores.
sin6_scope_id must stay in bind->remote because the TX path uses it as
flowi6_oif, so it cannot just be cleared there. Instead build the hash
key from family/address/port only, exactly like ovpn_peer_add_mp() and
the lookup, so all three sites agree on the bucket.
Fixes: f0281c1d37 ("ovpn: add support for updating local or remote UDP endpoint")
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
ovpn_peer_endpoints_update() builds the new remote endpoint in an
on-stack struct sockaddr_storage that is left uninitialized. For IPv4
only sin_family/sin_addr/sin_port are written, leaving the 8-byte
sin_zero padding as stack garbage (for IPv6, sin6_flowinfo is left
uninitialized likewise).
ovpn_peer_reset_sockaddr() -> ovpn_bind_from_sockaddr() then memcpy()s
sizeof(struct sockaddr_in)/sizeof(struct sockaddr_in6) bytes - padding
included - into bind->remote. That buffer is later hashed with jhash()
over the same length to place the peer in the by_transp_addr table, so
the garbage padding lands the floated peer in an essentially random
bucket. Lockless lookups in ovpn_peer_get_by_transp_addr() build their
key from a zero-initialized sockaddr_storage, compute a different bucket
and fail to find the peer.
This is also a plain use of uninitialized stack memory in jhash().
Build the floated endpoint with a designated initializer so the
padding (sin_zero for IPv4, sin6_flowinfo for IPv6) is zeroed as part
of the assignment. This keeps the padding out of the by_transp_addr
hash key without memset-ing the whole sockaddr_storage on every
received packet.
Fixes: f0281c1d37 ("ovpn: add support for updating local or remote UDP endpoint")
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Some subsystems, like BPF SOCKMAP, set sk_user_data without
actually setting the encap_type.
For this reason, we must make sure that the type is the
one ovpn expects before dereferencing sk_user_data.
Failing to do so may lead to out-of-bounds reads.
Fixes: f6226ae7a0 ("ovpn: introduce the ovpn_socket object")
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
When userspace updates a peer's remote endpoint via OVPN_CMD_PEER_SET,
ovpn_nl_peer_modify() installs a new ovpn_bind through
ovpn_peer_reset_sockaddr(), but ovpn_nl_peer_set_doit() only calls
ovpn_peer_hash_vpn_ip() to refresh the VPN-IP hashtables. The peer is
left in the bucket of peers->by_transp_addr corresponding to its old
remote address.
As a consequence, datagrams arriving at the UDP RX path from the newly
configured remote hash to a different slot and the lockless lookup in
ovpn_peer_get_by_transp_addr() (called from ovpn_udp_encap_recv()) does
not find the peer, until either a float event or a peer re-add fixes
the bucket.
Introduce ovpn_peer_hash_transp_addr() (modeled after
ovpn_peer_hash_vpn_ip()) and invoke it from ovpn_nl_peer_set_doit()
whenever the request carried a new remote address. The helper bails
out in P2P mode and on peers without a bind (TCP), and relies on
hlist_nulls_del_init_rcu()'s pprev==NULL short-circuit to handle the
case of an entry not currently linked in the table.
Fixes: 1d36a36f6d ("ovpn: implement peer add/get/dump/delete via netlink")
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
ovpn_nl_peer_set_doit() resolves the target peer via
ovpn_peer_get_by_id() before taking ovpn->lock. In the window between
the lookup (which only takes a refcount) and the subsequent
spin_lock_bh(&ovpn->lock), a concurrent OVPN_CMD_PEER_DEL, keepalive
expiry, or socket teardown can take ovpn->lock first, run
ovpn_peer_remove() to unhash the peer from all four tables (by_id,
by_vpn_addr4/6, by_transp_addr) and release the lock. set_doit then
acquires ovpn->lock and calls ovpn_peer_hash_vpn_ip(), which
re-inserts the now-removed peer back into the rehashing tables.
The same race affects the float path: ovpn_peer_endpoints_update()
holds only a refcount and acquires ovpn->lock very late (after async
AEAD decrypt and a netlink notification), then rehashes the peer
in the by_transp_addr table.
The resurrected peer becomes reachable again from the RX lookup
(ovpn_peer_get_by_transp_addr) and the TX VPN-IP lookup, even though
userspace believes it is gone. Once the data-path refcount drops the
peer is freed via call_rcu while the hash entries embedded in it
remain linked, opening a UAF window.
Bail out of the rehash when hash_entry_id is unhashed, mirroring
the sentinel already used by ovpn_peer_remove() to detect the
already-removed state. The check is safe under ovpn->lock, which
serializes every mutation of hash_entry_id, and is a no-op for the
add path because ovpn_peer_add_mp() inserts hash_entry_id before
calling ovpn_peer_hash_vpn_ip().
Fixes: 1d36a36f6d ("ovpn: implement peer add/get/dump/delete via netlink")
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Large keepalive values can overflow the delayed-work delay on 32-bit
systems, causing the keepalive worker to be repeatedly scheduled.
A correct configuration should not require such large keepalive values,
and an upper limit of one day is already generous and unnecessary in
practice. Limit both the keepalive interval and timeout to 86400 seconds.
Signed-off-by: Marco Baffo <marco@mandelbit.com>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
