Pull networking changes from Jakub Kicinski:
"WiFi 7 and sendpage changes are the biggest pieces of work for this
release. The latter will definitely require fixes but I think that we
got it to a reasonable point.
Core:
- Rework the sendpage & splice implementations
Instead of feeding data into sockets page by page extend sendmsg
handlers to support taking a reference on the data, controlled by a
new flag called MSG_SPLICE_PAGES
Rework the handling of unexpected-end-of-file to invoke an
additional callback instead of trying to predict what the right
combination of MORE/NOTLAST flags is
Remove the MSG_SENDPAGE_NOTLAST flag completely
- Implement SCM_PIDFD, a new type of CMSG type analogous to
SCM_CREDENTIALS, but it contains pidfd instead of plain pid
- Enable socket busy polling with CONFIG_RT
- Improve reliability and efficiency of reporting for ref_tracker
- Auto-generate a user space C library for various Netlink families
Protocols:
- Allow TCP to shrink the advertised window when necessary, prevent
sk_rcvbuf auto-tuning from growing the window all the way up to
tcp_rmem[2]
- Use per-VMA locking for "page-flipping" TCP receive zerocopy
- Prepare TCP for device-to-device data transfers, by making sure
that payloads are always attached to skbs as page frags
- Make the backoff time for the first N TCP SYN retransmissions
linear. Exponential backoff is unnecessarily conservative
- Create a new MPTCP getsockopt to retrieve all info
(MPTCP_FULL_INFO)
- Avoid waking up applications using TLS sockets until we have a full
record
- Allow using kernel memory for protocol ioctl callbacks, paving the
way to issuing ioctls over io_uring
- Add nolocalbypass option to VxLAN, forcing packets to be fully
encapsulated even if they are destined for a local IP address
- Make TCPv4 use consistent hash in TIME_WAIT and SYN_RECV. Ensure
in-kernel ECMP implementation (e.g. Open vSwitch) select the same
link for all packets. Support L4 symmetric hashing in Open vSwitch
- PPPoE: make number of hash bits configurable
- Allow DNS to be overwritten by DHCPACK in the in-kernel DHCP client
(ipconfig)
- Add layer 2 miss indication and filtering, allowing higher layers
(e.g. ACL filters) to make forwarding decisions based on whether
packet matched forwarding state in lower devices (bridge)
- Support matching on Connectivity Fault Management (CFM) packets
- Hide the "link becomes ready" IPv6 messages by demoting their
printk level to debug
- HSR: don't enable promiscuous mode if device offloads the proto
- Support active scanning in IEEE 802.15.4
- Continue work on Multi-Link Operation for WiFi 7
BPF:
- Add precision propagation for subprogs and callbacks. This allows
maintaining verification efficiency when subprograms are used, or
in fact passing the verifier at all for complex programs,
especially those using open-coded iterators
- Improve BPF's {g,s}setsockopt() length handling. Previously BPF
assumed the length is always equal to the amount of written data.
But some protos allow passing a NULL buffer to discover what the
output buffer *should* be, without writing anything
- Accept dynptr memory as memory arguments passed to helpers
- Add routing table ID to bpf_fib_lookup BPF helper
- Support O_PATH FDs in BPF_OBJ_PIN and BPF_OBJ_GET commands
- Drop bpf_capable() check in BPF_MAP_FREEZE command (used to mark
maps as read-only)
- Show target_{obj,btf}_id in tracing link fdinfo
- Addition of several new kfuncs (most of the names are
self-explanatory):
- Add a set of new dynptr kfuncs: bpf_dynptr_adjust(),
bpf_dynptr_is_null(), bpf_dynptr_is_rdonly(), bpf_dynptr_size()
and bpf_dynptr_clone().
- bpf_task_under_cgroup()
- bpf_sock_destroy() - force closing sockets
- bpf_cpumask_first_and(), rework bpf_cpumask_any*() kfuncs
Netfilter:
- Relax set/map validation checks in nf_tables. Allow checking
presence of an entry in a map without using the value
- Increase ip_vs_conn_tab_bits range for 64BIT builds
- Allow updating size of a set
- Improve NAT tuple selection when connection is closing
Driver API:
- Integrate netdev with LED subsystem, to allow configuring HW
"offloaded" blinking of LEDs based on link state and activity
(i.e. packets coming in and out)
- Support configuring rate selection pins of SFP modules
- Factor Clause 73 auto-negotiation code out of the drivers, provide
common helper routines
- Add more fool-proof helpers for managing lifetime of MDIO devices
associated with the PCS layer
- Allow drivers to report advanced statistics related to Time Aware
scheduler offload (taprio)
- Allow opting out of VF statistics in link dump, to allow more VFs
to fit into the message
- Split devlink instance and devlink port operations
New hardware / drivers:
- Ethernet:
- Synopsys EMAC4 IP support (stmmac)
- Marvell 88E6361 8 port (5x1GE + 3x2.5GE) switches
- Marvell 88E6250 7 port switches
- Microchip LAN8650/1 Rev.B0 PHYs
- MediaTek MT7981/MT7988 built-in 1GE PHY driver
- WiFi:
- Realtek RTL8192FU, 2.4 GHz, b/g/n mode, 2T2R, 300 Mbps
- Realtek RTL8723DS (SDIO variant)
- Realtek RTL8851BE
- CAN:
- Fintek F81604
Drivers:
- Ethernet NICs:
- Intel (100G, ice):
- support dynamic interrupt allocation
- use meta data match instead of VF MAC addr on slow-path
- nVidia/Mellanox:
- extend link aggregation to handle 4, rather than just 2 ports
- spawn sub-functions without any features by default
- OcteonTX2:
- support HTB (Tx scheduling/QoS) offload
- make RSS hash generation configurable
- support selecting Rx queue using TC filters
- Wangxun (ngbe/txgbe):
- add basic Tx/Rx packet offloads
- add phylink support (SFP/PCS control)
- Freescale/NXP (enetc):
- report TAPRIO packet statistics
- Solarflare/AMD:
- support matching on IP ToS and UDP source port of outer
header
- VxLAN and GENEVE tunnel encapsulation over IPv4 or IPv6
- add devlink dev info support for EF10
- Virtual NICs:
- Microsoft vNIC:
- size the Rx indirection table based on requested
configuration
- support VLAN tagging
- Amazon vNIC:
- try to reuse Rx buffers if not fully consumed, useful for ARM
servers running with 16kB pages
- Google vNIC:
- support TCP segmentation of >64kB frames
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- enable USXGMII (88E6191X)
- Microchip:
- lan966x: add support for Egress Stage 0 ACL engine
- lan966x: support mapping packet priority to internal switch
priority (based on PCP or DSCP)
- Ethernet PHYs:
- Broadcom PHYs:
- support for Wake-on-LAN for BCM54210E/B50212E
- report LPI counter
- Microsemi PHYs: support RGMII delay configuration (VSC85xx)
- Micrel PHYs: receive timestamp in the frame (LAN8841)
- Realtek PHYs: support optional external PHY clock
- Altera TSE PCS: merge the driver into Lynx PCS which it is a
variant of
- CAN: Kvaser PCIEcan:
- support packet timestamping
- WiFi:
- Intel (iwlwifi):
- major update for new firmware and Multi-Link Operation (MLO)
- configuration rework to drop test devices and split the
different families
- support for segmented PNVM images and power tables
- new vendor entries for PPAG (platform antenna gain) feature
- Qualcomm 802.11ax (ath11k):
- Multiple Basic Service Set Identifier (MBSSID) and Enhanced
MBSSID Advertisement (EMA) support in AP mode
- support factory test mode
- RealTek (rtw89):
- add RSSI based antenna diversity
- support U-NII-4 channels on 5 GHz band
- RealTek (rtl8xxxu):
- AP mode support for 8188f
- support USB RX aggregation for the newer chips"
* tag 'net-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1602 commits)
net: scm: introduce and use scm_recv_unix helper
af_unix: Skip SCM_PIDFD if scm->pid is NULL.
net: lan743x: Simplify comparison
netlink: Add __sock_i_ino() for __netlink_diag_dump().
net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addresses
Revert "af_unix: Call scm_recv() only after scm_set_cred()."
phylink: ReST-ify the phylink_pcs_neg_mode() kdoc
libceph: Partially revert changes to support MSG_SPLICE_PAGES
net: phy: mscc: fix packet loss due to RGMII delays
net: mana: use vmalloc_array and vcalloc
net: enetc: use vmalloc_array and vcalloc
ionic: use vmalloc_array and vcalloc
pds_core: use vmalloc_array and vcalloc
gve: use vmalloc_array and vcalloc
octeon_ep: use vmalloc_array and vcalloc
net: usb: qmi_wwan: add u-blox 0x1312 composition
perf trace: fix MSG_SPLICE_PAGES build error
ipvlan: Fix return value of ipvlan_queue_xmit()
netfilter: nf_tables: fix underflow in chain reference counter
netfilter: nf_tables: unbind non-anonymous set if rule construction fails
...
Pull mm updates from Andrew Morton:
- Yosry Ahmed brought back some cgroup v1 stats in OOM logs
- Yosry has also eliminated cgroup's atomic rstat flushing
- Nhat Pham adds the new cachestat() syscall. It provides userspace
with the ability to query pagecache status - a similar concept to
mincore() but more powerful and with improved usability
- Mel Gorman provides more optimizations for compaction, reducing the
prevalence of page rescanning
- Lorenzo Stoakes has done some maintanance work on the
get_user_pages() interface
- Liam Howlett continues with cleanups and maintenance work to the
maple tree code. Peng Zhang also does some work on maple tree
- Johannes Weiner has done some cleanup work on the compaction code
- David Hildenbrand has contributed additional selftests for
get_user_pages()
- Thomas Gleixner has contributed some maintenance and optimization
work for the vmalloc code
- Baolin Wang has provided some compaction cleanups,
- SeongJae Park continues maintenance work on the DAMON code
- Huang Ying has done some maintenance on the swap code's usage of
device refcounting
- Christoph Hellwig has some cleanups for the filemap/directio code
- Ryan Roberts provides two patch series which yield some
rationalization of the kernel's access to pte entries - use the
provided APIs rather than open-coding accesses
- Lorenzo Stoakes has some fixes to the interaction between pagecache
and directio access to file mappings
- John Hubbard has a series of fixes to the MM selftesting code
- ZhangPeng continues the folio conversion campaign
- Hugh Dickins has been working on the pagetable handling code, mainly
with a view to reducing the load on the mmap_lock
- Catalin Marinas has reduced the arm64 kmalloc() minimum alignment
from 128 to 8
- Domenico Cerasuolo has improved the zswap reclaim mechanism by
reorganizing the LRU management
- Matthew Wilcox provides some fixups to make gfs2 work better with the
buffer_head code
- Vishal Moola also has done some folio conversion work
- Matthew Wilcox has removed the remnants of the pagevec code - their
functionality is migrated over to struct folio_batch
* tag 'mm-stable-2023-06-24-19-15' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (380 commits)
mm/hugetlb: remove hugetlb_set_page_subpool()
mm: nommu: correct the range of mmap_sem_read_lock in task_mem()
hugetlb: revert use of page_cache_next_miss()
Revert "page cache: fix page_cache_next/prev_miss off by one"
mm/vmscan: fix root proactive reclaim unthrottling unbalanced node
mm: memcg: rename and document global_reclaim()
mm: kill [add|del]_page_to_lru_list()
mm: compaction: convert to use a folio in isolate_migratepages_block()
mm: zswap: fix double invalidate with exclusive loads
mm: remove unnecessary pagevec includes
mm: remove references to pagevec
mm: rename invalidate_mapping_pagevec to mapping_try_invalidate
mm: remove struct pagevec
net: convert sunrpc from pagevec to folio_batch
i915: convert i915_gpu_error to use a folio_batch
pagevec: rename fbatch_count()
mm: remove check_move_unevictable_pages()
drm: convert drm_gem_put_pages() to use a folio_batch
i915: convert shmem_sg_free_table() to use a folio_batch
scatterlist: add sg_set_folio()
...
Pull arm64 documentation move from Jonathan Corbet:
"Move the arm64 architecture documentation under Documentation/arch/.
This brings some order to the documentation directory, declutters the
top-level directory, and makes the documentation organization more
closely match that of the source"
* tag 'docs-arm64-move' of git://git.lwn.net/linux:
perf arm-spe: Fix a dangling Documentation/arm64 reference
mm: Fix a dangling Documentation/arm64 reference
arm64: Fix dangling references to Documentation/arm64
dt-bindings: fix dangling Documentation/arm64 reference
docs: arm64: Move arm64 documentation under Documentation/arch/
Pull cgroup updates from Tejun Heo:
- Whenever cpuset needs to rebuild sched_domain, it walked all tasks
looking for DEADLINE tasks as they need to be accounted on the new
domain. Walking all tasks can be expensive and there may not be any
DEADLINE tasks at all. Task iteration is now omitted if there are no
DEADLINE tasks
- Fixes DEADLINE bandwidth misaccounting after task migration failures
- When no controller is enabled, -Wstringop-overflow warning is
triggered. The fix patch added an early exit which is too eager and
got reverted for now. Will fix later
- Everything else is minor cleanups
* tag 'cgroup-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
Revert "cgroup: Avoid -Wstringop-overflow warnings"
cgroup/misc: Expose misc.current on cgroup v2 root
cgroup: Avoid -Wstringop-overflow warnings
cgroup: remove obsolete comment on cgroup_on_dfl()
cgroup: remove unused task_cgroup_path()
cgroup/cpuset: remove unneeded header files
cgroup: make cgroup_is_threaded() and cgroup_is_thread_root() static
rdmacg: fix kernel-doc warnings in rdmacg
cgroup: Replace the css_set call with cgroup_get
cgroup: remove unused macro for_each_e_css()
cgroup: Update out-of-date comment in cgroup_migrate()
cgroup: Replace all non-returning strlcpy with strscpy
cgroup/cpuset: remove unneeded header files
cgroup/cpuset: Free DL BW in case can_attach() fails
sched/deadline: Create DL BW alloc, free & check overflow interface
cgroup/cpuset: Iterate only if DEADLINE tasks are present
sched/cpuset: Keep track of SCHED_DEADLINE task in cpusets
sched/cpuset: Bring back cpuset_mutex
cgroup/cpuset: Rename functions dealing with DEADLINE accounting
Pull workqueue updates from Tejun Heo:
- Concurrency-managed per-cpu work items that hog CPUs and delay the
execution of other work items are now automatically detected and
excluded from concurrency management. Reporting on such work items
can also be enabled through a config option.
- Added tools/workqueue/wq_monitor.py which improves visibility into
workqueue usages and behaviors.
- Arnd's minimal fix for gcc-13 enum warning on 32bit compiles,
superseded by commit afa4bb778e in mainline.
* tag 'wq-for-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Disable per-cpu CPU hog detection when wq_cpu_intensive_thresh_us is 0
workqueue: Fix WARN_ON_ONCE() triggers in worker_enter_idle()
workqueue: fix enum type for gcc-13
workqueue: Track and monitor per-workqueue CPU time usage
workqueue: Report work funcs that trigger automatic CPU_INTENSIVE mechanism
workqueue: Automatically mark CPU-hogging work items CPU_INTENSIVE
workqueue: Improve locking rule description for worker fields
workqueue: Move worker_set/clr_flags() upwards
workqueue: Re-order struct worker fields
workqueue: Add pwq->stats[] and a monitoring script
Further upgrade queue_work_on() comment
Pull objtool updates from Ingo Molar:
"Build footprint & performance improvements:
- Reduce memory usage with CONFIG_DEBUG_INFO=y
In the worst case of an allyesconfig+CONFIG_DEBUG_INFO=y kernel,
DWARF creates almost 200 million relocations, ballooning objtool's
peak heap usage to 53GB. These patches reduce that to 25GB.
On a distro-type kernel with kernel IBT enabled, they reduce
objtool's peak heap usage from 4.2GB to 2.8GB.
These changes also improve the runtime significantly.
Debuggability improvements:
- Add the unwind_debug command-line option, for more extend unwinding
debugging output
- Limit unreachable warnings to once per function
- Add verbose option for disassembling affected functions
- Include backtrace in verbose mode
- Detect missing __noreturn annotations
- Ignore exc_double_fault() __noreturn warnings
- Remove superfluous global_noreturns entries
- Move noreturn function list to separate file
- Add __kunit_abort() to noreturns
Unwinder improvements:
- Allow stack operations in UNWIND_HINT_UNDEFINED regions
- drm/vmwgfx: Add unwind hints around RBP clobber
Cleanups:
- Move the x86 entry thunk restore code into thunk functions
- x86/unwind/orc: Use swap() instead of open coding it
- Remove unnecessary/unused variables
Fixes for modern stack canary handling"
* tag 'objtool-core-2023-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
x86/orc: Make the is_callthunk() definition depend on CONFIG_BPF_JIT=y
objtool: Skip reading DWARF section data
objtool: Free insns when done
objtool: Get rid of reloc->rel[a]
objtool: Shrink elf hash nodes
objtool: Shrink reloc->sym_reloc_entry
objtool: Get rid of reloc->jump_table_start
objtool: Get rid of reloc->addend
objtool: Get rid of reloc->type
objtool: Get rid of reloc->offset
objtool: Get rid of reloc->idx
objtool: Get rid of reloc->list
objtool: Allocate relocs in advance for new rela sections
objtool: Add for_each_reloc()
objtool: Don't free memory in elf_close()
objtool: Keep GElf_Rel[a] structs synced
objtool: Add elf_create_section_pair()
objtool: Add mark_sec_changed()
objtool: Fix reloc_hash size
objtool: Consolidate rel/rela handling
...
Pull x86 mtrr updates from Borislav Petkov:
"A serious scrubbing of the MTRR code including adding a new map
mechanism in order to look up the memory type of a region easily.
Also address memory range lookup issues like returning an invalid
memory type. Furthermore, this handles the decoupling of PAT from MTRR
more naturally.
All work by Juergen Gross"
* tag 'x86_mtrr_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/xen: Set default memory type for PV guests to WB
x86/mtrr: Unify debugging printing
x86/mtrr: Remove unused code
x86/mm: Only check uniform after calling mtrr_type_lookup()
x86/mtrr: Don't let mtrr_type_lookup() return MTRR_TYPE_INVALID
x86/mtrr: Use new cache_map in mtrr_type_lookup()
x86/mtrr: Add mtrr=debug command line option
x86/mtrr: Construct a memory map with cache modes
x86/mtrr: Add get_effective_type() service function
x86/mtrr: Allocate mtrr_value array dynamically
x86/mtrr: Move 32-bit code from mtrr.c to legacy.c
x86/mtrr: Have only one set_mtrr() variant
x86/mtrr: Replace vendor tests in MTRR code
x86/xen: Set MTRR state when running as Xen PV initial domain
x86/hyperv: Set MTRR state when running as SEV-SNP Hyper-V guest
x86/mtrr: Support setting MTRR state for software defined MTRRs
x86/mtrr: Replace size_or_mask and size_and_mask with a much easier concept
x86/mtrr: Remove physical address size calculation
Pull documentation updates from Jonathan Corbet:
"It's been a relatively calm cycle in docsland. We do have:
- Some initial page-table documentation from Linus (the other Linus)
- Regression-handling documentation improvements from Thorsten
- Addition of kerneldoc documentation for the ERR_PTR() and related
macros from James Seo
... and the usual collection of fixes and updates"
* tag 'docs-6.5' of git://git.lwn.net/linux:
docs: consolidate storage interfaces
Documentation: update git configuration for Link: tag
Documentation: KVM: make corrections to vcpu-requests.rst
Documentation: KVM: make corrections to ppc-pv.rst
Documentation: KVM: make corrections to locking.rst
Documentation: KVM: make corrections to halt-polling.rst
Documentation: virt: correct location of haltpoll module params
Documentation/mm: Initial page table documentation
docs: crypto: async-tx-api: fix typo in struct name
docs/doc-guide: Clarify how to write tables
docs: handling-regressions: rework section about fixing procedures
docs: process: fix a typoed cross-reference
docs: submitting-patches: Discuss interleaved replies
MAINTAINERS: direct process doc changes to a dedicated ML
Documentation: core-api: Add error pointer functions to kernel-api
err.h: Add missing kerneldocs for error pointer functions
Documentation: conf.py: Add __force to c_id_attributes
docs: clarify KVM related kernel parameters' descriptions
docs: consolidate human interface subsystems
docs: admin-guide: Add information about intel_pstate active mode
Pull RCU updates from Paul McKenney:
"Documentation updates
Miscellaneous fixes, perhaps most notably:
- Remove RCU_NONIDLE(). The new visibility of most of the idle loop
to RCU has obsoleted this API.
- Make the RCU_SOFTIRQ callback-invocation time limit also apply to
the rcuc kthreads that invoke callbacks for CONFIG_PREEMPT_RT.
- Add a jiffies-based callback-invocation time limit to handle
long-running callbacks. (The local_clock() function is only invoked
once per 32 callbacks due to its high overhead.)
- Stop rcu_tasks_invoke_cbs() from using never-onlined CPUs, which
fixes a bug that can occur on systems with non-contiguous CPU
numbering.
kvfree_rcu updates:
- Eliminate the single-argument variant of k[v]free_rcu() now that
all uses have been converted to k[v]free_rcu_mightsleep().
- Add WARN_ON_ONCE() checks for k[v]free_rcu*() freeing callbacks too
soon. Yes, this is closing the barn door after the horse has
escaped, but Murphy says that there will be more horses.
Callback-offloading updates:
- Fix a number of bugs involving the shrinker and lazy callbacks.
Tasks RCU updates
Torture-test updates"
* tag 'rcu.2023.06.22a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (32 commits)
torture: Remove duplicated argument -enable-kvm for ppc64
doc/rcutorture: Add description of rcutorture.stall_cpu_block
rcu/rcuscale: Stop kfree_scale_thread thread(s) after unloading rcuscale
rcu/rcuscale: Move rcu_scale_*() after kfree_scale_cleanup()
rcutorture: Correct name of use_softirq module parameter
locktorture: Add long_hold to adjust lock-hold delays
rcu/nocb: Make shrinker iterate only over NOCB CPUs
rcu-tasks: Stop rcu_tasks_invoke_cbs() from using never-onlined CPUs
rcu: Make rcu_cpu_starting() rely on interrupts being disabled
rcu: Mark rcu_cpu_kthread() accesses to ->rcu_cpu_has_work
rcu: Mark additional concurrent load from ->cpu_no_qs.b.exp
rcu: Employ jiffies-based backstop to callback time limit
rcu: Check callback-invocation time limit for rcuc kthreads
rcu: Remove RCU_NONIDLE()
rcu: Add more RCU files to kernel-api.rst
rcu-tasks: Clarify the cblist_init_generic() function's pr_info() output
rcu-tasks: Avoid pr_info() with spin lock in cblist_init_generic()
rcu/nocb: Recheck lazy callbacks under the ->nocb_lock from shrinker
rcu/nocb: Fix shrinker race against callback enqueuer
rcu/nocb: Protect lazy shrinker against concurrent (de-)offloading
...
Pull arm64 updates from Catalin Marinas:
"Notable features are user-space support for the memcpy/memset
instructions and the permission indirection extension.
- Support for the Armv8.9 Permission Indirection Extensions. While
this feature doesn't add new functionality, it enables future
support for Guarded Control Stacks (GCS) and Permission Overlays
- User-space support for the Armv8.8 memcpy/memset instructions
- arm64 perf: support the HiSilicon SoC uncore PMU, Arm CMN sysfs
identifier, support for the NXP i.MX9 SoC DDRC PMU, fixes and
cleanups
- Removal of superfluous ISBs on context switch (following
retrospective architecture tightening)
- Decode the ISS2 register during faults for additional information
to help with debugging
- KPTI clean-up/simplification of the trampoline exit code
- Addressing several -Wmissing-prototype warnings
- Kselftest improvements for signal handling and ptrace
- Fix TPIDR2_EL0 restoring on sigreturn
- Clean-up, robustness improvements of the module allocation code
- More sysreg conversions to the automatic register/bitfields
generation
- CPU capabilities handling cleanup
- Arm documentation updates: ACPI, ptdump"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (124 commits)
kselftest/arm64: Add a test case for TPIDR2 restore
arm64/signal: Restore TPIDR2 register rather than memory state
arm64: alternatives: make clean_dcache_range_nopatch() noinstr-safe
Documentation/arm64: Add ptdump documentation
arm64: hibernate: remove WARN_ON in save_processor_state
kselftest/arm64: Log signal code and address for unexpected signals
docs: perf: Fix warning from 'make htmldocs' in hisi-pmu.rst
arm64/fpsimd: Exit streaming mode when flushing tasks
docs: perf: Add new description for HiSilicon UC PMU
drivers/perf: hisi: Add support for HiSilicon UC PMU driver
drivers/perf: hisi: Add support for HiSilicon H60PA and PAv3 PMU driver
perf: arm_cspmu: Add missing MODULE_DEVICE_TABLE
perf/arm-cmn: Add sysfs identifier
perf/arm-cmn: Revamp model detection
perf/arm_dmc620: Add cpumask
arm64: mm: fix VA-range sanity check
arm64/mm: remove now-superfluous ISBs from TTBR writes
Documentation/arm64: Update ACPI tables from BBR
Documentation/arm64: Update references in arm-acpi
Documentation/arm64: Update ARM and arch reference
...
Pull SMP updates from Thomas Gleixner:
"A large update for SMP management:
- Parallel CPU bringup
The reason why people are interested in parallel bringup is to
shorten the (kexec) reboot time of cloud servers to reduce the
downtime of the VM tenants.
The current fully serialized bringup does the following per AP:
1) Prepare callbacks (allocate, intialize, create threads)
2) Kick the AP alive (e.g. INIT/SIPI on x86)
3) Wait for the AP to report alive state
4) Let the AP continue through the atomic bringup
5) Let the AP run the threaded bringup to full online state
There are two significant delays:
#3 The time for an AP to report alive state in start_secondary()
on x86 has been measured in the range between 350us and 3.5ms
depending on vendor and CPU type, BIOS microcode size etc.
#4 The atomic bringup does the microcode update. This has been
measured to take up to ~8ms on the primary threads depending
on the microcode patch size to apply.
On a two socket SKL server with 56 cores (112 threads) the boot CPU
spends on current mainline about 800ms busy waiting for the APs to
come up and apply microcode. That's more than 80% of the actual
onlining procedure.
This can be reduced significantly by splitting the bringup
mechanism into two parts:
1) Run the prepare callbacks and kick the AP alive for each AP
which needs to be brought up.
The APs wake up, do their firmware initialization and run the
low level kernel startup code including microcode loading in
parallel up to the first synchronization point. (#1 and #2
above)
2) Run the rest of the bringup code strictly serialized per CPU
(#3 - #5 above) as it's done today.
Parallelizing that stage of the CPU bringup might be possible
in theory, but it's questionable whether required surgery
would be justified for a pretty small gain.
If the system is large enough the first AP is already waiting at
the first synchronization point when the boot CPU finished the
wake-up of the last AP. That reduces the AP bringup time on that
SKL from ~800ms to ~80ms, i.e. by a factor ~10x.
The actual gain varies wildly depending on the system, CPU,
microcode patch size and other factors. There are some
opportunities to reduce the overhead further, but that needs some
deep surgery in the x86 CPU bringup code.
For now this is only enabled on x86, but the core functionality
obviously works for all SMP capable architectures.
- Enhancements for SMP function call tracing so it is possible to
locate the scheduling and the actual execution points. That allows
to measure IPI delivery time precisely"
* tag 'smp-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits)
trace,smp: Add tracepoints for scheduling remotelly called functions
trace,smp: Add tracepoints around remotelly called functions
MAINTAINERS: Add CPU HOTPLUG entry
x86/smpboot: Fix the parallel bringup decision
x86/realmode: Make stack lock work in trampoline_compat()
x86/smp: Initialize cpu_primary_thread_mask late
cpu/hotplug: Fix off by one in cpuhp_bringup_mask()
x86/apic: Fix use of X{,2}APIC_ENABLE in asm with older binutils
x86/smpboot/64: Implement arch_cpuhp_init_parallel_bringup() and enable it
x86/smpboot: Support parallel startup of secondary CPUs
x86/smpboot: Implement a bit spinlock to protect the realmode stack
x86/apic: Save the APIC virtual base address
cpu/hotplug: Allow "parallel" bringup up to CPUHP_BP_KICK_AP_STATE
x86/apic: Provide cpu_primary_thread mask
x86/smpboot: Enable split CPU startup
cpu/hotplug: Provide a split up CPUHP_BRINGUP mechanism
cpu/hotplug: Reset task stack state in _cpu_up()
cpu/hotplug: Remove unused state functions
riscv: Switch to hotplug core state synchronization
parisc: Switch to hotplug core state synchronization
...
Pull block updates from Jens Axboe:
- NVMe pull request via Keith:
- Various cleanups all around (Irvin, Chaitanya, Christophe)
- Better struct packing (Christophe JAILLET)
- Reduce controller error logs for optional commands (Keith)
- Support for >=64KiB block sizes (Daniel Gomez)
- Fabrics fixes and code organization (Max, Chaitanya, Daniel
Wagner)
- bcache updates via Coly:
- Fix a race at init time (Mingzhe Zou)
- Misc fixes and cleanups (Andrea, Thomas, Zheng, Ye)
- use page pinning in the block layer for dio (David)
- convert old block dio code to page pinning (David, Christoph)
- cleanups for pktcdvd (Andy)
- cleanups for rnbd (Guoqing)
- use the unchecked __bio_add_page() for the initial single page
additions (Johannes)
- fix overflows in the Amiga partition handling code (Michael)
- improve mq-deadline zoned device support (Bart)
- keep passthrough requests out of the IO schedulers (Christoph, Ming)
- improve support for flush requests, making them less special to deal
with (Christoph)
- add bdev holder ops and shutdown methods (Christoph)
- fix the name_to_dev_t() situation and use cases (Christoph)
- decouple the block open flags from fmode_t (Christoph)
- ublk updates and cleanups, including adding user copy support (Ming)
- BFQ sanity checking (Bart)
- convert brd from radix to xarray (Pankaj)
- constify various structures (Thomas, Ivan)
- more fine grained persistent reservation ioctl capability checks
(Jingbo)
- misc fixes and cleanups (Arnd, Azeem, Demi, Ed, Hengqi, Hou, Jan,
Jordy, Li, Min, Yu, Zhong, Waiman)
* tag 'for-6.5/block-2023-06-23' of git://git.kernel.dk/linux: (266 commits)
scsi/sg: don't grab scsi host module reference
ext4: Fix warning in blkdev_put()
block: don't return -EINVAL for not found names in devt_from_devname
cdrom: Fix spectre-v1 gadget
block: Improve kernel-doc headers
blk-mq: don't insert passthrough request into sw queue
bsg: make bsg_class a static const structure
ublk: make ublk_chr_class a static const structure
aoe: make aoe_class a static const structure
block/rnbd: make all 'class' structures const
block: fix the exclusive open mask in disk_scan_partitions
block: add overflow checks for Amiga partition support
block: change all __u32 annotations to __be32 in affs_hardblocks.h
block: fix signed int overflow in Amiga partition support
block: add capacity validation in bdev_add_partition()
block: fine-granular CAP_SYS_ADMIN for Persistent Reservation
block: disallow Persistent Reservation on partitions
reiserfs: fix blkdev_put() warning from release_journal_dev()
block: fix wrong mode for blkdev_get_by_dev() from disk_scan_partitions()
block: document the holder argument to blkdev_get_by_path
...
* arm64/for-next/perf:
docs: perf: Fix warning from 'make htmldocs' in hisi-pmu.rst
docs: perf: Add new description for HiSilicon UC PMU
drivers/perf: hisi: Add support for HiSilicon UC PMU driver
drivers/perf: hisi: Add support for HiSilicon H60PA and PAv3 PMU driver
perf: arm_cspmu: Add missing MODULE_DEVICE_TABLE
perf/arm-cmn: Add sysfs identifier
perf/arm-cmn: Revamp model detection
perf/arm_dmc620: Add cpumask
dt-bindings: perf: fsl-imx-ddr: Add i.MX93 compatible
drivers/perf: imx_ddr: Add support for NXP i.MX9 SoC DDRC PMU driver
perf/arm_cspmu: Decouple APMT dependency
perf/arm_cspmu: Clean up ACPI dependency
ACPI/APMT: Don't register invalid resource
perf/arm_cspmu: Fix event attribute type
perf: arm_cspmu: Set irq affinitiy only if overflow interrupt is used
drivers/perf: hisi: Don't migrate perf to the CPU going to teardown
drivers/perf: apple_m1: Force 63bit counters for M2 CPUs
perf/arm-cmn: Fix DTC reset
perf: qcom_l2_pmu: Make l2_cache_pmu_probe_cluster() more robust
perf/arm-cci: Slightly optimize cci_pmu_sync_counters()
* for-next/kpti:
: Simplify KPTI trampoline exit code
arm64: entry: Simplify tramp_alias macro and tramp_exit routine
arm64: entry: Preserve/restore X29 even for compat tasks
* for-next/missing-proto-warn:
: Address -Wmissing-prototype warnings
arm64: add alt_cb_patch_nops prototype
arm64: move early_brk64 prototype to header
arm64: signal: include asm/exception.h
arm64: kaslr: add kaslr_early_init() declaration
arm64: flush: include linux/libnvdimm.h
arm64: module-plts: inline linux/moduleloader.h
arm64: hide unused is_valid_bugaddr()
arm64: efi: add efi_handle_corrupted_x18 prototype
arm64: cpuidle: fix #ifdef for acpi functions
arm64: kvm: add prototypes for functions called in asm
arm64: spectre: provide prototypes for internal functions
arm64: move cpu_suspend_set_dbg_restorer() prototype to header
arm64: avoid prototype warnings for syscalls
arm64: add scs_patch_vmlinux prototype
arm64: xor-neon: mark xor_arm64_neon_*() static
* for-next/iss2-decode:
: Add decode of ISS2 to data abort reports
arm64/esr: Add decode of ISS2 to data abort reporting
arm64/esr: Use GENMASK() for the ISS mask
* for-next/kselftest:
: Various arm64 kselftest improvements
kselftest/arm64: Log signal code and address for unexpected signals
kselftest/arm64: Add a smoke test for ptracing hardware break/watch points
* for-next/misc:
: Miscellaneous patches
arm64: alternatives: make clean_dcache_range_nopatch() noinstr-safe
arm64: hibernate: remove WARN_ON in save_processor_state
arm64/fpsimd: Exit streaming mode when flushing tasks
arm64: mm: fix VA-range sanity check
arm64/mm: remove now-superfluous ISBs from TTBR writes
arm64: consolidate rox page protection logic
arm64: set __exception_irq_entry with __irq_entry as a default
arm64: syscall: unmask DAIF for tracing status
arm64: lockdep: enable checks for held locks when returning to userspace
arm64/cpucaps: increase string width to properly format cpucaps.h
arm64/cpufeature: Use helper for ECV CNTPOFF cpufeature
* for-next/feat_mops:
: Support for ARMv8.8 memcpy instructions in userspace
kselftest/arm64: add MOPS to hwcap test
arm64: mops: allow disabling MOPS from the kernel command line
arm64: mops: detect and enable FEAT_MOPS
arm64: mops: handle single stepping after MOPS exception
arm64: mops: handle MOPS exceptions
KVM: arm64: hide MOPS from guests
arm64: mops: don't disable host MOPS instructions from EL2
arm64: mops: document boot requirements for MOPS
KVM: arm64: switch HCRX_EL2 between host and guest
arm64: cpufeature: detect FEAT_HCX
KVM: arm64: initialize HCRX_EL2
* for-next/module-alloc:
: Make the arm64 module allocation code more robust (clean-up, VA range expansion)
arm64: module: rework module VA range selection
arm64: module: mandate MODULE_PLTS
arm64: module: move module randomization to module.c
arm64: kaslr: split kaslr/module initialization
arm64: kasan: remove !KASAN_VMALLOC remnants
arm64: module: remove old !KASAN_VMALLOC logic
* for-next/sysreg: (21 commits)
: More sysreg conversions to automatic generation
arm64/sysreg: Convert TRBIDR_EL1 register to automatic generation
arm64/sysreg: Convert TRBTRG_EL1 register to automatic generation
arm64/sysreg: Convert TRBMAR_EL1 register to automatic generation
arm64/sysreg: Convert TRBSR_EL1 register to automatic generation
arm64/sysreg: Convert TRBBASER_EL1 register to automatic generation
arm64/sysreg: Convert TRBPTR_EL1 register to automatic generation
arm64/sysreg: Convert TRBLIMITR_EL1 register to automatic generation
arm64/sysreg: Rename TRBIDR_EL1 fields per auto-gen tools format
arm64/sysreg: Rename TRBTRG_EL1 fields per auto-gen tools format
arm64/sysreg: Rename TRBMAR_EL1 fields per auto-gen tools format
arm64/sysreg: Rename TRBSR_EL1 fields per auto-gen tools format
arm64/sysreg: Rename TRBBASER_EL1 fields per auto-gen tools format
arm64/sysreg: Rename TRBPTR_EL1 fields per auto-gen tools format
arm64/sysreg: Rename TRBLIMITR_EL1 fields per auto-gen tools format
arm64/sysreg: Convert OSECCR_EL1 to automatic generation
arm64/sysreg: Convert OSDTRTX_EL1 to automatic generation
arm64/sysreg: Convert OSDTRRX_EL1 to automatic generation
arm64/sysreg: Convert OSLAR_EL1 to automatic generation
arm64/sysreg: Standardise naming of bitfield constants in OSL[AS]R_EL1
arm64/sysreg: Convert MDSCR_EL1 to automatic register generation
...
* for-next/cpucap:
: arm64 cpucap clean-up
arm64: cpufeature: fold cpus_set_cap() into update_cpu_capabilities()
arm64: cpufeature: use cpucap naming
arm64: alternatives: use cpucap naming
arm64: standardise cpucap bitmap names
* for-next/acpi:
: Various arm64-related ACPI patches
ACPI: bus: Consolidate all arm specific initialisation into acpi_arm_init()
* for-next/kdump:
: Simplify the crashkernel reservation behaviour of crashkernel=X,high on arm64
arm64: add kdump.rst into index.rst
Documentation: add kdump.rst to present crashkernel reservation on arm64
arm64: kdump: simplify the reservation behaviour of crashkernel=,high
* for-next/acpi-doc:
: Update ACPI documentation for Arm systems
Documentation/arm64: Update ACPI tables from BBR
Documentation/arm64: Update references in arm-acpi
Documentation/arm64: Update ARM and arch reference
* for-next/doc:
: arm64 documentation updates
Documentation/arm64: Add ptdump documentation
* for-next/tpidr2-fix:
: Fix the TPIDR2_EL0 register restoring on sigreturn
kselftest/arm64: Add a test case for TPIDR2 restore
arm64/signal: Restore TPIDR2 register rather than memory state
Hello,
This patch is to expose misc.current on cgroup v2 root for tracking
how much of the resource has been consumed in total on the system.
Most of the cloud infrastucture use cgroup to fetch the host
information for scheduling purpose.
Currently, the misc controller can be used by Intel TDX HKIDs and
AMD SEV ASIDs, which are both used for creating encrypted VMs.
Intel TDX and AMD SEV are mostly be used by the cloud providers
for providing confidential VMs.
In actual use of a server, these confidential VMs may be launched
in different ways. For the cloud solution, there are kubvirt and
coco (tracked by kubepods.slice); on host, they can be booted
directly through qemu by end user (tracked by user.slice), etc.
In this complex environment, when wanting to know how many resource
is used in total it has to iterate through all existing slices to
get the value of each misc.current and add them up to calculate
the total number of consumed keys.
So exposing misc.current to root cgroup tends to give much easier
when calculates how much resource has been used in total, which
helps to schedule and count resources for the cloud infrastucture.
Signed-off-by: LeiZhou-97 <lei.zhou@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Architecture-specific documentation is being moved into Documentation/arch/
as a way of cleaning up the top-level documentation directory and making
the docs hierarchy more closely match the source hierarchy. Move
Documentation/arm64 into arch/ (along with the Chinese equvalent
translations) and fix up documentation references.
Cc: Will Deacon <will@kernel.org>
Cc: Alex Shi <alexs@kernel.org>
Cc: Hu Haowen <src.res@email.cn>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Yantengsi <siyanteng@loongson.cn>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The recommended ways for getting DAMON monitoring results are using
tried_regions sysfs directory for partial snapshot of the results, and
DAMON tracepoint for full record of the results. However, the
tried_regions sysfs directory usage has not sufficiently updated on some
sections of the DAMON usage document. Update those.
Link: https://lkml.kernel.org/r/20230616191742.87531-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Building the 'htmldocs' target results in the following warning when
processing 'hisi-pmu.rst':
| Documentation/admin-guide/perf/hisi-pmu.rst:107: ERROR: Unexpected indentation.
Fix the warning by converting all of the register bitfield lists into
proper bulleted lists and adjusting the indentation of the wrapping line
accordingly. At the same time, use an enumerated list to describe the
new PMUv2 functions.
Fixes: ea8d1c062a ("docs: perf: Add new description for HiSilicon UC PMU")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Will Deacon <will@kernel.org>
This patch is similar to commit 8e20d4b332 ("mm/memcontrol: export
memcg->watermark via sysfs for v2 memcg"), but exports the swap counter's
watermark.
We allocate jobs to our compute farm using heuristics determined by memory
and swap usage from previous jobs. Tracking the peak swap usage for new
jobs is important for determining when jobs are exceeding their expected
bounds, or when our baseline metrics are getting outdated.
Our toolset was written to use the "memory.memsw.max_usage_in_bytes" file
in cgroups v1, and altering it to poll cgroups v2's "memory.swap.current"
would give less accurate results as well as add complication to the code.
Having this watermark exposed in sysfs is much preferred.
Link: https://lkml.kernel.org/r/20230524181734.125696-1-lars@pixar.com
Signed-off-by: Lars R. Damerow <lars@pixar.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull cgroup fixes from Tejun Heo:
- Fix css_set reference leaks on fork failures
- Fix CPU hotplug locking in cgroup_transfer_tasks() which is used by
cgroup1 cpuset
- Doc update
* tag 'cgroup-for-6.4-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Documentation: Clarify usage of memory limits
cgroup: always put cset in cgroup_css_set_put_fork
cgroup: fix missing cpus_read_{lock,unlock}() in cgroup_transfer_tasks()
Since commit a78418e6a0 ("block: Always initialize bio IO priority on
submit"), bio->bi_ioprio will never be IOPRIO_CLASS_NONE when calling
blkcg_set_ioprio(), so there will be no way to promote the io-priority
of one cgroup to IOPRIO_CLASS_RT, because bi_ioprio will always be
greater than or equals to IOPRIO_CLASS_RT.
It seems possible to call blkcg_set_ioprio() first then try to
initialize bi_ioprio later in bio_set_ioprio(), but this doesn't work
for bio in which bi_ioprio is already initialized (e.g., direct-io), so
introduce a new promote-to-rt policy to promote the iopriority of bio to
IOPRIO_CLASS_RT if the ioprio is not already RT.
For none-to-rt policy, although it doesn't work now, but considering
that its purpose was also to override the io-priority to RT and allowing
for a smoother transition, just keep it and treat it as an alias of
the promote-to-rt policy.
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20230428074404.280532-1-houtao@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The existing documentation refers to memory.high as the "main mechanism
to control memory usage." This seems incorrect to me - memory.high can
result in reclaim pressure which simply leads to stalls unless some
external component observes and actions on it (e.g. systemd-oomd can be
used for this purpose). While this is feasible, users are unaware of
this interaction and are led to believe that memory.high alone is an
effective mechanism for limiting memory.
The documentation should recommend the use of memory.max as the
effective way to enforce memory limits - it triggers reclaim and results
in OOM kills by itself.
Signed-off-by: Dan Schatzberg <schatzberg.dan@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Chris Down <chris@chrisdown.name>
Signed-off-by: Tejun Heo <tj@kernel.org>
name_to_dev_t has a very misleading name, that doesn't make clear
it should only be used by the early init code, and also has a bad
calling convention that doesn't allow returning different kinds of
errors. Rename it to early_lookup_bdev to make the use case clear,
and return an errno, where -EINVAL means the string could not be
parsed, and -ENODEV means it the string was valid, but there was
no device found for it.
Also stub out the whole call for !CONFIG_BLOCK as all the non-block
root cases are always covered in the caller.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230531125535.676098-14-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The net.core.txrehash documentation mentions this knob is for listening
sockets only, while sk_rethink_txhash can be called on SYN and RTO
retransmits on all TCP sockets.
Remove the listening socket part.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The fs/cifs directory has moved to fs/smb/client, correct mentions
of this in Documentation and comments.
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The descriptions of certain KVM related kernel parameters can be
confusing. They state "Disable ...," which may make people think that
setting them to 1 will disable the associated feature when in fact the
opposite is true.
This commit addresses this issue by revising the descriptions of these
parameters by using "Control..." rather than "Enable/Disable...".
1==enabled or 0==disabled can be communicated by the description of
default value such as "1 (enabled)" or "0 (disabled)".
Also update the description of KVM's default value for kvm-intel.nested
as it is enabled by default.
Signed-off-by: Yan-Jie Wang <yanjiewtw@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20230503081530.19956-1-yanjiewtw@gmail.com
Information about intel_pstate active mode is added in the doc.
This operation mode could be used to set on the hardware when it's
not activated. Status of the mode could be checked from sysfs file
i.e., /sys/devices/system/cpu/intel_pstate/status.
The information is already available in cpu-freq/intel-pstate.txt
documentation.
Signed-off-by: Natesh Sharma <nsharma@redhat.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
[jc: reformatted for width ]
Link: https://lore.kernel.org/r/20230427083706.49882-1-nsharma@redhat.com
Workqueue now automatically marks per-cpu work items that hog CPU for too
long as CPU_INTENSIVE, which excludes them from concurrency management and
prevents stalling other concurrency-managed work items. If a work function
keeps running over the thershold, it likely needs to be switched to use an
unbound workqueue.
This patch adds a debug mechanism which tracks the work functions which
trigger the automatic CPU_INTENSIVE mechanism and report them using
pr_warn() with exponential backoff.
v3: Documentation update.
v2: Drop bouncing to kthread_worker for printing messages. It was to avoid
introducing circular locking dependency through printk but not effective
as it still had pool lock -> wci_lock -> printk -> pool lock loop. Let's
just print directly using printk_deferred().
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
If a per-cpu work item hogs the CPU, it can prevent other work items from
starting through concurrency management. A per-cpu workqueue which intends
to host such CPU-hogging work items can choose to not participate in
concurrency management by setting %WQ_CPU_INTENSIVE; however, this can be
error-prone and difficult to debug when missed.
This patch adds an automatic CPU usage based detection. If a
concurrency-managed work item consumes more CPU time than the threshold
(10ms by default) continuously without intervening sleeps, wq_worker_tick()
which is called from scheduler_tick() will detect the condition and
automatically mark it CPU_INTENSIVE.
The mechanism isn't foolproof:
* Detection depends on tick hitting the work item. Getting preempted at the
right timings may allow a violating work item to evade detection at least
temporarily.
* nohz_full CPUs may not be running ticks and thus can fail detection.
* Even when detection is working, the 10ms detection delays can add up if
many CPU-hogging work items are queued at the same time.
However, in vast majority of cases, this should be able to detect violations
reliably and provide reasonable protection with a small increase in code
complexity.
If some work items trigger this condition repeatedly, the bigger problem
likely is the CPU being saturated with such per-cpu work items and the
solution would be making them UNBOUND. The next patch will add a debug
mechanism to help spot such cases.
v4: Documentation for workqueue.cpu_intensive_thresh_us added to
kernel-parameters.txt.
v3: Switch to use wq_worker_tick() instead of hooking into preemptions as
suggested by Peter.
v2: Lai pointed out that wq_worker_stopping() also needs to be called from
preemption and rtlock paths and an earlier patch was updated
accordingly. This patch adds a comment describing the risk of infinte
recursions and how they're avoided.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
* improve the short description of localmodconfig in the step-by-step
guide while fixing its broken first sentence
* briefly mention immutable Linux distributions
* use '--shallow-exclude=v6.0' throughout the document
* instead of "git reset --hard; git checkout ..." use "git checkout
--force ..." in the step-by-step guide: this matches the TLDR and is
one command less to execute. This led to a few small adjustments to
the text and the flow in the surrounding area.
* fix two thinkos in the section explaining full git clones
Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info>
Link: https://lore.kernel.org/r/6f4684b9a5d11d3adb04e0af3cfc60db8b28eeb2.1684140700.git.linux@leemhuis.info
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
If you build a kernel with CONFIG_PREEMPTION=n and CONFIG_PREEMPT_COUNT=y,
then run the rcutorture tests specifying stalls as follows:
runqemu kvm slirp nographic qemuparams="-m 1024 -smp 4" \
bootparams="console=ttyS0 rcutorture.stall_cpu=30 \
rcutorture.stall_no_softlockup=1 rcutorture.stall_cpu_block=1" -d
The tests will produce the following splat:
[ 10.841071] rcu-torture: rcu_torture_stall begin CPU stall
[ 10.841073] rcu_torture_stall start on CPU 3.
[ 10.841077] BUG: scheduling while atomic: rcu_torture_sta/66/0x0000000
....
[ 10.841108] Call Trace:
[ 10.841110] <TASK>
[ 10.841112] dump_stack_lvl+0x64/0xb0
[ 10.841118] dump_stack+0x10/0x20
[ 10.841121] __schedule_bug+0x8b/0xb0
[ 10.841126] __schedule+0x2172/0x2940
[ 10.841157] schedule+0x9b/0x150
[ 10.841160] schedule_timeout+0x2e8/0x4f0
[ 10.841192] schedule_timeout_uninterruptible+0x47/0x50
[ 10.841195] rcu_torture_stall+0x2e8/0x300
[ 10.841199] kthread+0x175/0x1a0
[ 10.841206] ret_from_fork+0x2c/0x50
This is because the rcutorture.stall_cpu_block=1 module parameter causes
rcu_torture_stall() to invoke schedule_timeout_uninterruptible() within
an RCU read-side critical section. This in turn results in a quiescent
state (which prevents the stall) and a sleep in an atomic context (which
produces the above splat).
Although this code is operating as designed, the design has proven to
be counterintuitive to many. This commit therefore updates the description
in kernel-parameters.txt accordingly.
[ paulmck: Apply Joel Fernandes feedback. ]
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
There is often significant latency in the early stages of CPU bringup, and
time is wasted by waking each CPU (e.g. with SIPI/INIT/INIT on x86) and
then waiting for it to respond before moving on to the next.
Allow a platform to enable parallel setup which brings all to be onlined
CPUs up to the CPUHP_BP_KICK_AP state. While this state advancement on the
control CPU (BP) is single-threaded the important part is the last state
CPUHP_BP_KICK_AP which wakes the to be onlined CPUs up.
This allows the CPUs to run up to the first sychronization point
cpuhp_ap_sync_alive() where they wait for the control CPU to release them
one by one for the full onlining procedure.
This parallelism depends on the CPU hotplug core sync mechanism which
ensures that the parallel brought up CPUs wait for release before touching
any state which would make the CPU visible to anything outside the hotplug
control mechanism.
To handle the SMT constraints of X86 correctly the bringup happens in two
iterations when CONFIG_HOTPLUG_SMT is enabled. The control CPU brings up
the primary SMT threads of each core first, which can load the microcode
without the need to rendevouz with the thread siblings. Once that's
completed it brings up the secondary SMT threads.
Co-developed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Helge Deller <deller@gmx.de> # parisc
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> # Steam Deck
Link: https://lore.kernel.org/r/20230512205257.240231377@linutronix.de
This was introduced together with commit e1c467e690 ("x86, hotplug: Wake
up CPU0 via NMI instead of INIT, SIPI, SIPI") to eventually support
physical hotplug of CPU0:
"We'll change this code in the future to wake up hard offlined CPU0 if
real platform and request are available."
11 years later this has not happened and physical hotplug is not officially
supported. Remove the cruft.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Helge Deller <deller@gmx.de> # parisc
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com> # Steam Deck
Link: https://lore.kernel.org/r/20230512205255.715707999@linutronix.de
This commit adds kernel-parameters.txt documentation for the
rcutree.rcu_resched_ns module parameter.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
