Pull memblock fix from Mike Rapoport:
"memblock: always release pages to the buddy allocator in
memblock_free_late()
If CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled, memblock_free_pages()
only releases pages to the buddy allocator if they are not in the
deferred range. This is correct for free pages (as defined by
for_each_free_mem_pfn_range_in_zone()) because free pages in the
deferred range will be initialized and released as part of the
deferred init process.
memblock_free_pages() is called by memblock_free_late(), which is used
to free reserved ranges after memblock_free_all() has run. All pages
in reserved ranges have been initialized at that point, and
accordingly, those pages are not touched by the deferred init process.
This means that currently, if the pages that memblock_free_late()
intends to release are in the deferred range, they will never be
released to the buddy allocator. They will forever be reserved.
In addition, memblock_free_pages() calls kmsan_memblock_free_pages(),
which is also correct for free pages but is not correct for reserved
pages. KMSAN metadata for reserved pages is initialized by
kmsan_init_shadow(), which runs shortly before memblock_free_all().
For both of these reasons, memblock_free_pages() should only be called
for free pages, and memblock_free_late() should call
__free_pages_core() directly instead.
One case where this issue can occur in the wild is EFI boot on x86_64.
The x86 EFI code reserves all EFI boot services memory ranges via
memblock_reserve() and frees them later via memblock_free_late()
(efi_reserve_boot_services() and efi_free_boot_services(),
respectively).
If any of those ranges happens to fall within the deferred init range,
the pages will not be released and that memory will be unavailable.
For example, on an Amazon EC2 t3.micro VM (1 GB) booting via EFI:
v6.2-rc2:
Node 0, zone DMA
spanned 4095
present 3999
managed 3840
Node 0, zone DMA32
spanned 246652
present 245868
managed 178867
v6.2-rc2 + patch:
Node 0, zone DMA
spanned 4095
present 3999
managed 3840
Node 0, zone DMA32
spanned 246652
present 245868
managed 222816 # +43,949 pages"
* tag 'fixes-2023-01-14' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
mm: Always release pages to the buddy allocator in memblock_free_late().
Pull networking fixes from Paolo Abeni:
"Including fixes from rxrpc.
The rxrpc changes are noticeable large: to address a recent regression
has been necessary completing the threaded refactor.
Current release - regressions:
- rxrpc:
- only disconnect calls in the I/O thread
- move client call connection to the I/O thread
- fix incoming call setup race
- eth: mlx5:
- restore pkt rate policing support
- fix memory leak on updating vport counters
Previous releases - regressions:
- gro: take care of DODGY packets
- ipv6: deduct extension header length in rawv6_push_pending_frames
- tipc: fix unexpected link reset due to discovery messages
Previous releases - always broken:
- sched: disallow noqueue for qdisc classes
- eth: ice: fix potential memory leak in ice_gnss_tty_write()
- eth: ixgbe: fix pci device refcount leak
- eth: mlx5:
- fix command stats access after free
- fix macsec possible null dereference when updating MAC security
entity (SecY)"
* tag 'net-6.2-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits)
r8152: add vendor/device ID pair for Microsoft Devkit
net: stmmac: add aux timestamps fifo clearance wait
bnxt: make sure we return pages to the pool
net: hns3: fix wrong use of rss size during VF rss config
ipv6: raw: Deduct extension header length in rawv6_push_pending_frames
net: lan966x: check for ptp to be enabled in lan966x_ptp_deinit()
net: sched: disallow noqueue for qdisc classes
iavf/iavf_main: actually log ->src mask when talking about it
igc: Fix PPS delta between two synchronized end-points
ixgbe: fix pci device refcount leak
octeontx2-pf: Fix resource leakage in VF driver unbind
selftests/net: l2_tos_ttl_inherit.sh: Ensure environment cleanup on failure.
selftests/net: l2_tos_ttl_inherit.sh: Run tests in their own netns.
selftests/net: l2_tos_ttl_inherit.sh: Set IPv6 addresses with "nodad".
net/mlx5e: Fix macsec possible null dereference when updating MAC security entity (SecY)
net/mlx5e: Fix macsec ssci attribute handling in offload path
net/mlx5: E-switch, Coverity: overlapping copy
net/mlx5e: Don't support encap rules with gbp option
net/mlx5: Fix ptp max frequency adjustment range
net/mlx5e: Fix memory leak on updating vport counters
...
Use 'set -e' and an exit handler to stop the script if a command fails
and ensure the test environment is cleaned up in any case. Also, handle
the case where the script is interrupted by SIGINT.
The only command that's expected to fail is 'wait $ping_pid', since
it's killed by the script. Handle this case with '|| true' to make it
play well with 'set -e'.
Finally, return the Kselftest SKIP code (4) when the script breaks
because of an environment problem or a command line failure. The 0 and
1 return codes should now reliably indicate that all tests have been
run (0: all tests run and passed, 1: all tests run but at least one
failed, 4: test script didn't run completely).
Fixes: b690842d12 ("selftests/net: test l2 tunnel TOS/TTL inheriting")
Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This selftest currently runs half in the current namespace and half in
a netns of its own. Therefore, the test can fail if the current
namespace is already configured with incompatible parameters (for
example if it already has a veth0 interface).
Adapt the script to put both ends of the veth pair in their own netns.
Now veth0 is created in NS0 instead of the current namespace, while
veth1 is set up in NS1 (instead of the 'testing' netns).
The user visible netns names are randomised to minimise the risk of
conflicts with already existing namespaces. The cleanup() function
doesn't need to remove the virtual interface anymore: deleting NS0 and
NS1 automatically removes the virtual interfaces they contained.
We can remove $ns, which was only used to run ip commands in the
'testing' netns (let's use the builtin "-netns" option instead).
However, we still need a similar functionality as ping and tcpdump
now need to run in NS0. So we now have $RUN_NS0 for that.
Fixes: b690842d12 ("selftests/net: test l2 tunnel TOS/TTL inheriting")
Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The ping command can run before DAD completes. In that case, ping may
fail and break the selftest.
We don't need DAD here since we're working on isolated device pairs.
Fixes: b690842d12 ("selftests/net: test l2 tunnel TOS/TTL inheriting")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Adjust size parameter in connect() to match the type of the parameter, to
fix "No such file or directory" error in selftests/net/af_unix/
test_oob_unix.c:127.
The existing code happens to work provided that the autogenerated pathname
is shorter than sizeof (struct sockaddr), which is why it hasn't been
noticed earlier.
Visible from the trace excerpt:
bind(3, {sa_family=AF_UNIX, sun_path="unix_oob_453059"}, 110) = 0
clone(child_stack=NULL, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x7fa6a6577a10) = 453060
[pid <child>] connect(6, {sa_family=AF_UNIX, sun_path="unix_oob_45305"}, 16) = -1 ENOENT (No such file or directory)
BUG: The filename is trimmed to sizeof (struct sockaddr).
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Cc: Florian Westphal <fw@strlen.de>
Reviewed-by: Florian Westphal <fw@strlen.de>
Fixes: 314001f0bf ("af_unix: Add OOB support")
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled, memblock_free_pages()
only releases pages to the buddy allocator if they are not in the
deferred range. This is correct for free pages (as defined by
for_each_free_mem_pfn_range_in_zone()) because free pages in the
deferred range will be initialized and released as part of the deferred
init process. memblock_free_pages() is called by memblock_free_late(),
which is used to free reserved ranges after memblock_free_all() has
run. All pages in reserved ranges have been initialized at that point,
and accordingly, those pages are not touched by the deferred init
process. This means that currently, if the pages that
memblock_free_late() intends to release are in the deferred range, they
will never be released to the buddy allocator. They will forever be
reserved.
In addition, memblock_free_pages() calls kmsan_memblock_free_pages(),
which is also correct for free pages but is not correct for reserved
pages. KMSAN metadata for reserved pages is initialized by
kmsan_init_shadow(), which runs shortly before memblock_free_all().
For both of these reasons, memblock_free_pages() should only be called
for free pages, and memblock_free_late() should call __free_pages_core()
directly instead.
One case where this issue can occur in the wild is EFI boot on
x86_64. The x86 EFI code reserves all EFI boot services memory ranges
via memblock_reserve() and frees them later via memblock_free_late()
(efi_reserve_boot_services() and efi_free_boot_services(),
respectively). If any of those ranges happens to fall within the
deferred init range, the pages will not be released and that memory will
be unavailable.
For example, on an Amazon EC2 t3.micro VM (1 GB) booting via EFI:
v6.2-rc2:
# grep -E 'Node|spanned|present|managed' /proc/zoneinfo
Node 0, zone DMA
spanned 4095
present 3999
managed 3840
Node 0, zone DMA32
spanned 246652
present 245868
managed 178867
v6.2-rc2 + patch:
# grep -E 'Node|spanned|present|managed' /proc/zoneinfo
Node 0, zone DMA
spanned 4095
present 3999
managed 3840
Node 0, zone DMA32
spanned 246652
present 245868
managed 222816 # +43,949 pages
Fixes: 3a80a7fa79 ("mm: meminit: initialise a subset of struct pages if CONFIG_DEFERRED_STRUCT_PAGE_INIT is set")
Signed-off-by: Aaron Thompson <dev@aaront.org>
Link: https://lore.kernel.org/r/01010185892de53e-e379acfb-7044-4b24-b30a-e2657c1ba989-000000@us-west-2.amazonses.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Pull memblock fixes from Mike Rapoport:
"Small fixes in kernel-doc and tests:
- Fix kernel-doc for memblock_phys_free() to use correct names for
the counterpart allocation methods
- Fix compilation error in memblock tests"
* tag 'fixes-2023-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: Fix doc for memblock_phys_free
memblock tests: Fix compilation error.
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, wifi, and netfilter.
Current release - regressions:
- bpf: fix nullness propagation for reg to reg comparisons, avoid
null-deref
- inet: control sockets should not use current thread task_frag
- bpf: always use maximal size for copy_array()
- eth: bnxt_en: don't link netdev to a devlink port for VFs
Current release - new code bugs:
- rxrpc: fix a couple of potential use-after-frees
- netfilter: conntrack: fix IPv6 exthdr error check
- wifi: iwlwifi: fw: skip PPAG for JF, avoid FW crashes
- eth: dsa: qca8k: various fixes for the in-band register access
- eth: nfp: fix schedule in atomic context when sync mc address
- eth: renesas: rswitch: fix getting mac address from device tree
- mobile: ipa: use proper endpoint mask for suspend
Previous releases - regressions:
- tcp: add TIME_WAIT sockets in bhash2, fix regression caught by
Jiri / python tests
- net: tc: don't intepret cls results when asked to drop, fix
oob-access
- vrf: determine the dst using the original ifindex for multicast
- eth: bnxt_en:
- fix XDP RX path if BPF adjusted packet length
- fix HDS (header placement) and jumbo thresholds for RX packets
- eth: ice: xsk: do not use xdp_return_frame() on tx_buf->raw_buf,
avoid memory corruptions
Previous releases - always broken:
- ulp: prevent ULP without clone op from entering the LISTEN status
- veth: fix race with AF_XDP exposing old or uninitialized
descriptors
- bpf:
- pull before calling skb_postpull_rcsum() (fix checksum support
and avoid a WARN())
- fix panic due to wrong pageattr of im->image (when livepatch and
kretfunc coexist)
- keep a reference to the mm, in case the task is dead
- mptcp: fix deadlock in fastopen error path
- netfilter:
- nf_tables: perform type checking for existing sets
- nf_tables: honor set timeout and garbage collection updates
- ipset: fix hash:net,port,net hang with /0 subnet
- ipset: avoid hung task warning when adding/deleting entries
- selftests: net:
- fix cmsg_so_mark.sh test hang on non-x86 systems
- fix the arp_ndisc_evict_nocarrier test for IPv6
- usb: rndis_host: secure rndis_query check against int overflow
- eth: r8169: fix dmar pte write access during suspend/resume with
WOL
- eth: lan966x: fix configuration of the PCS
- eth: sparx5: fix reading of the MAC address
- eth: qed: allow sleep in qed_mcp_trace_dump()
- eth: hns3:
- fix interrupts re-initialization after VF FLR
- fix handling of promisc when MAC addr table gets full
- refine the handling for VF heartbeat
- eth: mlx5:
- properly handle ingress QinQ-tagged packets on VST
- fix io_eq_size and event_eq_size params validation on big endian
- fix RoCE setting at HCA level if not supported at all
- don't turn CQE compression on by default for IPoIB
- eth: ena:
- fix toeplitz initial hash key value
- account for the number of XDP-processed bytes in interface stats
- fix rx_copybreak value update
Misc:
- ethtool: harden phy stat handling against buggy drivers
- docs: netdev: convert maintainer's doc from FAQ to a normal
document"
* tag 'net-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (112 commits)
caif: fix memory leak in cfctrl_linkup_request()
inet: control sockets should not use current thread task_frag
net/ulp: prevent ULP without clone op from entering the LISTEN status
qed: allow sleep in qed_mcp_trace_dump()
MAINTAINERS: Update maintainers for ptp_vmw driver
usb: rndis_host: Secure rndis_query check against int overflow
net: dpaa: Fix dtsec check for PCS availability
octeontx2-pf: Fix lmtst ID used in aura free
drivers/net/bonding/bond_3ad: return when there's no aggregator
netfilter: ipset: Rework long task execution when adding/deleting entries
netfilter: ipset: fix hash:net,port,net hang with /0 subnet
net: sparx5: Fix reading of the MAC address
vxlan: Fix memory leaks in error path
net: sched: htb: fix htb_classify() kernel-doc
net: sched: cbq: dont intepret cls results when asked to drop
net: sched: atm: dont intepret cls results when asked to drop
dt-bindings: net: marvell,orion-mdio: Fix examples
dt-bindings: net: sun8i-emac: Add phy-supply property
net: ipa: use proper endpoint mask for suspend
selftests: net: return non-zero for failures reported in arp_ndisc_evict_nocarrier
...
Alexei Starovoitov says:
====================
bpf 2023-01-04
We've added 5 non-merge commits during the last 8 day(s) which contain
a total of 5 files changed, 112 insertions(+), 18 deletions(-).
The main changes are:
1) Always use maximal size for copy_array in the verifier to fix
KASAN tracking, from Kees.
2) Fix bpf task iterator walking through dead tasks, from Kui-Feng.
3) Make sure livepatch and bpf fexit can coexist, from Chuang.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Always use maximal size for copy_array()
selftests/bpf: add a test for iter/task_vma for short-lived processes
bpf: keep a reference to the mm, in case the task is dead.
selftests/bpf: Temporarily disable part of btf_dump:var_data test.
bpf: Fix panic due to wrong pageattr of im->image
====================
Link: https://lore.kernel.org/r/20230104215500.79435-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit cf4694be2b ("tools: Add atomic_test_and_set_bit()") changed
tools/arch/x86/include/asm/atomic.h to include <asm/asm.h>, which causes
'make -C tools/testing/memblock' to fail with:
In file included from ../../include/asm/atomic.h:6,
from ../../include/linux/atomic.h:5,
from ./linux/mmzone.h:5,
from ../../include/linux/mm.h:5,
from ../../include/linux/pfn.h:5,
from ./linux/memory_hotplug.h:6,
from ./linux/init.h:7,
from ./linux/memblock.h:11,
from tests/common.h:8,
from tests/basic_api.h:5,
from main.c:2:
../../include/asm/../../arch/x86/include/asm/atomic.h:11:10: fatal error: asm/asm.h: No such file or directory
11 | #include <asm/asm.h>
| ^~~~~~~~~~~
Create a symlink to asm/asm.h in the same manner as the existing one to
asm/cmpxchg.h.
Signed-off-by: Aaron Thompson <dev@aaront.org>
Link: https://lore.kernel.org/r/010101857c402765-96e2dbc6-b82b-47e2-a437-4834dbe0b96b-000000@us-west-2.amazonses.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Return non-zero return value if there is any failure reported in this
script during the test. Otherwise it can only reflect the status of
the last command.
Fixes: f86ca07eb5 ("selftests: net: add arp_ndisc_evict_nocarrier")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The cleanup_v6() will cause the arp_ndisc_evict_nocarrier script exit
with 255 (No such file or directory), even the tests are good:
# selftests: net: arp_ndisc_evict_nocarrier.sh
# run arp_evict_nocarrier=1 test
# RTNETLINK answers: File exists
# ok
# run arp_evict_nocarrier=0 test
# RTNETLINK answers: File exists
# ok
# run all.arp_evict_nocarrier=0 test
# RTNETLINK answers: File exists
# ok
# run ndisc_evict_nocarrier=1 test
# ok
# run ndisc_evict_nocarrier=0 test
# ok
# run all.ndisc_evict_nocarrier=0 test
# ok
not ok 1 selftests: net: arp_ndisc_evict_nocarrier.sh # exit=255
This is because it's trying to modify the parameter for ipv4 instead.
Also, tests for ipv6 (run_ndisc_evict_nocarrier_enabled() and
run_ndisc_evict_nocarrier_disabled() are working on veth1, reflect
this fact in cleanup_v6().
Fixes: f86ca07eb5 ("selftests: net: add arp_ndisc_evict_nocarrier")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
bhash2 split the bind() validation logic into wildcard and non-wildcard
cases. Let's add a test to catch future regression.
Before the previous patch:
# ./bind_timewait
TAP version 13
1..2
# Starting 2 tests from 3 test cases.
# RUN bind_timewait.localhost.1 ...
# bind_timewait.c:87:1:Expected ret (0) == -1 (-1)
# 1: Test terminated by assertion
# FAIL bind_timewait.localhost.1
not ok 1 bind_timewait.localhost.1
# RUN bind_timewait.addrany.1 ...
# OK bind_timewait.addrany.1
ok 2 bind_timewait.addrany.1
# FAILED: 1 / 2 tests passed.
# Totals: pass:1 fail:1 xfail:0 xpass:0 skip:0 error:0
After:
# ./bind_timewait
TAP version 13
1..2
# Starting 2 tests from 3 test cases.
# RUN bind_timewait.localhost.1 ...
# OK bind_timewait.localhost.1
ok 1 bind_timewait.localhost.1
# RUN bind_timewait.addrany.1 ...
# OK bind_timewait.addrany.1
ok 2 bind_timewait.addrany.1
# PASSED: 2 / 2 tests passed.
# Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
x86:
* Change tdp_mmu to a read-only parameter
* Separate TDP and shadow MMU page fault paths
* Enable Hyper-V invariant TSC control
selftests:
* Use TAP interface for kvm_binary_stats_test and tsc_msrs_test
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a test for the newly introduced Hyper-V invariant TSC control feature:
- HV_X64_MSR_TSC_INVARIANT_CONTROL is not available without
HV_ACCESS_TSC_INVARIANT CPUID bit set and available with it.
- BIT(0) of HV_X64_MSR_TSC_INVARIANT_CONTROL controls the filtering of
architectural invariant TSC (CPUID.80000007H:EDX[8]) bit.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221013095849.705943-8-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Enhance 'hyperv_features' selftest by adding a check that KVM
preserves values written to PV MSRs. Two MSRs are, however, 'special':
- HV_X64_MSR_EOI as it is a 'write-only' MSR,
- HV_X64_MSR_RESET as it always reads as '0'.
The later doesn't require any special handling right now because the
test never writes anything besides '0' to the MSR, leave a TODO node
about the fact.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221013095849.705943-7-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It may not be clear what 'msr->available' means. The test actually
checks that accessing the particular MSR doesn't cause #GP, rename
the variable accordingly.
While on it, use 'true'/'false' instead of '1'/'0' for 'write'/
'fault_expected' as these are boolean.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221013095849.705943-5-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The kvm_binary_stats_test test currently does not have any output (unless
one of the TEST_ASSERT statement fails), so it's hard to say for a user
how far it did proceed already. Thus let's make this a little bit more
user-friendly and include some TAP output via the kselftest.h interface.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Message-Id: <20221004093131.40392-2-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When a task iterator traverses vma(s), it is possible task->mm might
become invalid in the middle of traversal and this may cause kernel
misbehave (e.g., crash)
This test case creates iterators repeatedly and forks short-lived
processes in the background to detect this bug. The test will last
for 3 seconds to get the chance to trigger the issue.
Signed-off-by: Kui-Feng Lee <kuifeng@meta.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221216221855.4122288-3-kuifeng@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit 7443b296e6 ("x86/percpu: Move cpu_number next to current_task")
moved global per_cpu variable 'cpu_number' into pcpu_hot structure.
Therefore this part of var_data test is no longer valid.
Disable it until better solution is found.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
x86:
* several fixes to nested VMX execution controls
* fixes and clarification to the documentation for Xen emulation
* do not unnecessarily release a pmu event with zero period
* MMU fixes
* fix Coverity warning in kvm_hv_flush_tlb()
selftests:
* fixes for the ucall mechanism in selftests
* other fixes mostly related to compilation with clang
Commit 8fda37cf3d ("KVM: selftests: Stuff RAX/RCX with 'safe' values
in vmmcall()/vmcall()", 2022-11-21) broke the svm_nested_soft_inject_test
because it placed a "pop rbp" instruction after vmmcall. While this is
correct and mimics what is done in the VMX case, this particular test
expects a ud2 instruction right after the vmmcall, so that it can skip
over it in the L1 part of the test.
Inline a suitably-modified version of vmmcall() to restore the
functionality of the test.
Fixes: 8fda37cf3d ("KVM: selftests: Stuff RAX/RCX with 'safe' values in vmmcall()/vmcall()"
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20221130181147.9911-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
While KVM_XEN_EVTCHN_RESET is usually called with no vCPUs running,
if that happened it could cause a deadlock. This is due to
kvm_xen_eventfd_reset() doing a synchronize_srcu() inside
a kvm->lock critical section.
To avoid this, first collect all the evtchnfd objects in an
array and free all of them once the kvm->lock critical section
is over and th SRCU grace period has expired.
Reported-by: Michal Luczaj <mhal@rbox.co>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The loop marks vaddr as mapped after incrementing it by page size,
thereby marking the *next* page as mapped. Set the bit in vpages_mapped
first instead.
Fixes: 56fc773203 ("KVM: selftests: Fill in vm->vpages_mapped bitmap in virt_map() too")
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Message-Id: <20221209015307.1781352-4-oliver.upton@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Currently the ucall MMIO hole is placed immediately after slot0, which
is a relatively safe address in the PA space. However, it is possible
that the same address has already been used for something else (like the
guest program image) in the VA space. At least in my own testing,
building the vgic_irq test with clang leads to the MMIO hole appearing
underneath gicv3_ops.
Stop identity mapping the MMIO hole and instead find an unused VA to map
to it. Yet another subtle detail of the KVM selftests library is that
virt_pg_map() does not update vm->vpages_mapped. Switch over to
virt_map() instead to guarantee that the chosen VA isn't to something
else.
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Message-Id: <20221209015307.1781352-6-oliver.upton@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Explain the meaning of the bit manipulations of vm_vaddr_populate_bitmap.
These correspond to the "canonical addresses" of x86 and other
architectures, but that is not obvious.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use a magic value to signal a ucall_alloc() failure instead of simply
doing GUEST_ASSERT(). GUEST_ASSERT() relies on ucall_alloc() and so a
failure puts the guest into an infinite loop.
Use -1 as the magic value, as a real ucall struct should never wrap.
Reported-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Disable gnu-variable-sized-type-not-at-end so that tests and libraries
can create overlays of variable sized arrays at the end of structs when
using a fixed number of entries, e.g. to get/set a single MSR.
It's possible to fudge around the warning, e.g. by defining a custom
struct that hardcodes the number of entries, but that is a burden for
both developers and readers of the code.
lib/x86_64/processor.c:664:19: warning: field 'header' with variable sized type 'struct kvm_msrs'
not at the end of a struct or class is a GNU extension [-Wgnu-variable-sized-type-not-at-end]
struct kvm_msrs header;
^
lib/x86_64/processor.c:772:19: warning: field 'header' with variable sized type 'struct kvm_msrs'
not at the end of a struct or class is a GNU extension [-Wgnu-variable-sized-type-not-at-end]
struct kvm_msrs header;
^
lib/x86_64/processor.c:787:19: warning: field 'header' with variable sized type 'struct kvm_msrs'
not at the end of a struct or class is a GNU extension [-Wgnu-variable-sized-type-not-at-end]
struct kvm_msrs header;
^
3 warnings generated.
x86_64/hyperv_tlb_flush.c:54:18: warning: field 'hv_vp_set' with variable sized type 'struct hv_vpset'
not at the end of a struct or class is a GNU extension [-Wgnu-variable-sized-type-not-at-end]
struct hv_vpset hv_vp_set;
^
1 warning generated.
x86_64/xen_shinfo_test.c:137:25: warning: field 'info' with variable sized type 'struct kvm_irq_routing'
not at the end of a struct or class is a GNU extension [-Wgnu-variable-sized-type-not-at-end]
struct kvm_irq_routing info;
^
1 warning generated.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221213001653.3852042-12-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Include lib.mk before consuming $(CC) and document that lib.mk overwrites
$(CC) unless make was invoked with -e or $(CC) was specified after make
(which makes the environment override the Makefile). Including lib.mk
after using it for probing, e.g. for -no-pie, can lead to weirdness.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221213001653.3852042-11-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Explicitly disable the compiler's builtin memcmp(), memcpy(), and
memset(). Because only lib/string_override.c is built with -ffreestanding,
the compiler reserves the right to do what it wants and can try to link the
non-freestanding code to its own crud.
/usr/bin/x86_64-linux-gnu-ld: /lib/x86_64-linux-gnu/libc.a(memcmp.o): in function `memcmp_ifunc':
(.text+0x0): multiple definition of `memcmp'; tools/testing/selftests/kvm/lib/string_override.o:
tools/testing/selftests/kvm/lib/string_override.c:15: first defined here
clang: error: linker command failed with exit code 1 (use -v to see invocation)
Fixes: 6b6f71484b ("KVM: selftests: Implement memcmp(), memcpy(), and memset() for guest use")
Reported-by: Aaron Lewis <aaronlewis@google.com>
Reported-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221213001653.3852042-10-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Probe -no-pie with the actual set of CFLAGS used to compile the tests,
clang whines about -no-pie being unused if the tests are compiled with
-static.
clang: warning: argument unused during compilation: '-no-pie'
[-Wunused-command-line-argument]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221213001653.3852042-9-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make the main() functions in the probing code proper prototypes so that
compiling the probing code with more strict flags won't generate false
negatives.
<stdin>:1:5: error: function declaration isn’t a prototype [-Werror=strict-prototypes]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221213001653.3852042-8-seanjc@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rename UNAME_M to ARCH_DIR and explicitly set it directly for x86. At
this point, the name of the arch directory really doesn't have anything
to do with `uname -m`, and UNAME_M is unnecessarily confusing given that
its purpose is purely to identify the arch specific directory.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221213001653.3852042-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix a == vs. = typo in kvm_get_cpu_address_width() that results in
@pa_bits being left unset if the CPU doesn't support enumerating its
MAX_PHY_ADDR. Flagged by clang's unusued-value warning.
lib/x86_64/processor.c:1034:51: warning: expression result unused [-Wunused-value]
*pa_bits == kvm_cpu_has(X86_FEATURE_PAE) ? 36 : 32;
Fixes: 3bd396353d ("KVM: selftests: Add X86_FEATURE_PAE and use it calc "fallback" MAXPHYADDR")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20221213001653.3852042-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use pattern matching to exclude everything except .c, .h, .S, and .sh
files from Git. Manually adding every test target has an absurd
maintenance cost, is comically error prone, and leads to bikeshedding
over whether or not the targets should be listed in alphabetical order.
Deliberately do not include the one-off assets, e.g. config, settings,
.gitignore itself, etc as Git doesn't ignore files that are already in
the repository. Adding the one-off assets won't prevent mistakes where
developers forget to --force add files that don't match the "allowed".
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221213001653.3852042-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
