Goal here is cut over to gpusvm and remove xe_hmm, relying instead on
common code. The core facilities we need are get_pages(), unmap_pages()
and free_pages() for a given useptr range, plus a vm level notifier
lock, which is now provided by gpusvm.
v2:
- Reuse the same SVM vm struct we use for full SVM, that way we can
use the same lock (Matt B & Himal)
v3:
- Re-use svm_init/fini for userptr.
v4:
- Allow building xe without userptr if we are missing DRM_GPUSVM
config. (Matt B)
- Always make .read_only match xe_vma_read_only() for the ctx. (Dafna)
v5:
- Fix missing conversion with CONFIG_DRM_XE_USERPTR_INVAL_INJECT
v6:
- Convert the new user in xe_vm_madise.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Dafna Hirschfeld <dafna.hirschfeld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250828142430.615826-17-matthew.auld@intel.com
Most H2G messages are FAST_REQ which means no synchronous response is
expected. The messages are sent as fire-and-forget with no tracking.
However, errors can still be returned when something goes unexpectedly
wrong. That leads to confusion due to not being able to match up the
error response to the originating H2G.
So add support for tracking the FAST_REQ H2Gs and matching up an error
response to its originator. This is only enabled in XE_DEBUG builds
given that such errors should never happen in a working system and
there is an overhead for the tracking.
Further, if XE_DEBUG_GUC is enabled then even more memory and time is
used to record the call stack of each H2G and report that with the
error. That makes it much easier to work out where a specific H2G came
from if there are multiple code paths that can send it.
v2: Some re-wording of comments and prints, more consistent use of #if
vs stub functions - review feedback from Daniele & Michal).
v3: Split config change to separate patch, improve a debug print
(review feedback from Michal).
v4: Bunch of minor tweaks (review feedback from Michal).
Original-i915-code: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://lore.kernel.org/r/20250512215324.1457009-5-John.C.Harrison@Intel.com
When the driver is built-in but the tests are in loadable modules,
the helpers don't actually get put into the driver:
ERROR: modpost: "xe_kunit_helper_alloc_xe_device" [drivers/gpu/drm/xe/tests/xe_test.ko] undefined!
Change the Makefile to ensure they are always part of the driver
even when the rest of the kunit tests are in loadable modules.
Fixes: 5095d13d75 ("drm/xe/kunit: Define helper functions to allocate fake xe device")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226124736.1272949-1-arnd@kernel.org
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Add some basic unit tests for rtp. This is intended to prove the
functionality of the rtp itself, like coalescing entries, rejecting
non-disjoint values, etc.
Contrary to the other tests in xe, this is a unit test to test the
sw-side only, so it can be executed on any machine - it doesn't interact
with the real hardware. Running it produces the following output:
$ ./tools/testing/kunit/kunit.py run --raw_output-kunit \
--kunitconfig drivers/gpu/drm/xe/.kunitconfig xe_rtp
...
[01:26:27] Starting KUnit Kernel (1/1)...
KTAP version 1
1..1
KTAP version 1
# Subtest: xe_rtp
1..1
KTAP version 1
# Subtest: xe_rtp_process_tests
ok 1 coalesce-same-reg
ok 2 no-match-no-add
ok 3 no-match-no-add-multiple-rules
ok 4 two-regs-two-entries
ok 5 clr-one-set-other
ok 6 set-field
[drm:xe_reg_sr_add] *ERROR* Discarding save-restore reg 0001 (clear: 00000001, set: 00000001, masked: no): ret=-22
ok 7 conflict-duplicate
[drm:xe_reg_sr_add] *ERROR* Discarding save-restore reg 0001 (clear: 00000003, set: 00000000, masked: no): ret=-22
ok 8 conflict-not-disjoint
[drm:xe_reg_sr_add] *ERROR* Discarding save-restore reg 0001 (clear: 00000002, set: 00000002, masked: no): ret=-22
[drm:xe_reg_sr_add] *ERROR* Discarding save-restore reg 0001 (clear: 00000001, set: 00000001, masked: yes): ret=-22
ok 9 conflict-reg-type
# xe_rtp_process_tests: pass:9 fail:0 skip:0 total:9
ok 1 xe_rtp_process_tests
# Totals: pass:9 fail:0 skip:0 total:9
ok 1 xe_rtp
...
Note that the ERRORs in the kernel log are expected since it's testing
incompatible entries.
v2:
- Use parameterized table for tests (Michał Winiarski)
- Move everything to the xe_rtp_test.ko and only add a few exports to the
right namespace
- Add more tests to cover FIELD_SET, CLR, partially true rules, etc
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Maarten Lankhorst<maarten.lankhorst@linux.intel.com> # v1
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://lore.kernel.org/r/20230401085151.1786204-7-lucas.demarchi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Xe, is a new driver for Intel GPUs that supports both integrated and
discrete platforms starting with Tiger Lake (first Intel Xe Architecture).
The code is at a stage where it is already functional and has experimental
support for multiple platforms starting from Tiger Lake, with initial
support implemented in Mesa (for Iris and Anv, our OpenGL and Vulkan
drivers), as well as in NEO (for OpenCL and Level0).
The new Xe driver leverages a lot from i915.
As for display, the intent is to share the display code with the i915
driver so that there is maximum reuse there. But it is not added
in this patch.
This initial work is a collaboration of many people and unfortunately
the big squashed patch won't fully honor the proper credits. But let's
get some git quick stats so we can at least try to preserve some of the
credits:
Co-developed-by: Matthew Brost <matthew.brost@intel.com>
Co-developed-by: Matthew Auld <matthew.auld@intel.com>
Co-developed-by: Matt Roper <matthew.d.roper@intel.com>
Co-developed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Co-developed-by: Francois Dugast <francois.dugast@intel.com>
Co-developed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Co-developed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Co-developed-by: Philippe Lecluse <philippe.lecluse@intel.com>
Co-developed-by: Nirmoy Das <nirmoy.das@intel.com>
Co-developed-by: Jani Nikula <jani.nikula@intel.com>
Co-developed-by: José Roberto de Souza <jose.souza@intel.com>
Co-developed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Co-developed-by: Dave Airlie <airlied@redhat.com>
Co-developed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Co-developed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Co-developed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
