mirrors/linux
2
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git synced 2026-05-14 17:06:24 -04:00
Code Issues Packages Projects Releases Wiki Activity
1,367,697 Commits 1 Branch 930 Tags
4fa93223e03eea3243db83786f556b6c1494de3e
Commit Graph

1367697 Commits

This Branch
This Branch
All Branches
Author SHA1 Message Date
Nuno Sá
adf4932bc9 dt-bindings: mfd: adp5585: add properties for input events 
Add properties related to input events. These devices can act as
keyboards and can support events either via a keymap Matrix or through
GPIs. Note that the device needs to be an interrupt controller for GPIs
based events.

We specifically need a property specifying the pins used by the keymap
matrix since these devices have no requirement for rows and columns to be
contiguous without holes which is enforced by the standard input
properties.

Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-11-b1fcfe9e9826@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
 2025-07-01 21:50:51 +01:00
Nuno Sá
75024f97e8 pwm: adp5585: add support for adp5589 
Add support for the adp5589 I/O expander. From a PWM point of view it is
pretty similar to adp5585. Main difference is the address
of registers meaningful for configuring the PWM.

Acked-by: Uwe Kleine-König <ukleinek@kernel.org>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-10-b1fcfe9e9826@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
 2025-07-01 21:50:51 +01:00
Nuno Sá
9f425bf713 gpio: adp5585: add support for the adp5589 expander 
Support the adp5589 I/O expander which supports up to 19 pins. We need
to add a chip_info based struct since accessing register "banks"
and "bits" differs between devices.

Also some register addresses are different.

While at it move ADP558X_GPIO_MAX defines to the main header file and
rename them. That information will be needed by the top level device in
a following change.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-9-b1fcfe9e9826@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
 2025-07-01 21:50:51 +01:00
Nuno Sá
7077fb501b mfd: adp5585: Add a per chip reg struture 
There are some differences in the register map between the devices.
Hence, add a register structure per device. This will be needed in
following patches.

On top of that adp5585_fill_regmap_config() is renamed and reworked so
that the current struct adp5585_info act as template (they indeed
contain all the different data between variants) which can then be
complemented depending on the device (as identified by the id register).
This is done like this since a lot of the data is pretty much the same
between variants of the same device.

Reviewed-by: Lee Jones <lee@kernel.org>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-8-b1fcfe9e9826@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
 2025-07-01 21:50:51 +01:00
Nuno Sá
0190a72f28 mfd: adp5585: Add support for adp5589 
The ADP5589 is a 19 I/O port expander with built-in keypad matrix decoder,
programmable logic, reset generator, and PWM generator.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-7-b1fcfe9e9826@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
 2025-07-01 21:50:51 +01:00
Nuno Sá
1a4eabf662 mfd: adp5585: Refactor how regmap defaults are handled 
The only thing changing between variants is the regmap default
registers. Hence, instead of having a regmap configuration for every
variant (duplicating lots of fields), add a chip info type of structure
with a regmap ID to identify which defaults to use and populate
regmap_config at runtime given a template plus the id. Also note that
between variants, the defaults can be the same which means the chip info
structure can be used in more than one compatible.

This will also make it simpler adding new chips with more variants.

Also note that the chip info structures are deliberately not const as
they will also contain lots of members that are the same between the
different devices variants and so we will fill those at runtime.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-6-b1fcfe9e9826@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
 2025-07-01 21:50:50 +01:00
Nuno Sá
e65e2b0d0f dt-bindings: mfd: adp5585: document adp5589 I/O expander 
The ADP5589 is a 19 I/O port expander with built-in keypad matrix decoder,
programmable logic, reset generator, and PWM generator.

We can't really have adp5589 devices fallback to adp5585 (which have
less pins) because there are some significant differences in the register
map.

Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-5-b1fcfe9e9826@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
 2025-07-01 21:50:50 +01:00
Nuno Sá
e6545bdb1b mfd: adp5585: Make use of MFD_CELL_NAME() 
Use the helper macro. No functional change intended...

Whilst we're at it, now seems like a good time to update the Copyright.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-4-b1fcfe9e9826@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
 2025-07-01 21:50:50 +01:00
Nuno Sá
e551760164 mfd: adp5585: Enable oscillator during probe 
Make sure to enable the oscillator in the top device. This will allow to
not control this in the child PWM device as that would not work with
future support for keyboard matrix where the oscillator needs to be
always enabled (and so cannot be disabled by disabling PWM).

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Uwe Kleine-König <ukleinek@kernel.org>
Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-3-b1fcfe9e9826@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
 2025-07-01 21:50:50 +01:00
Nuno Sá
175f199085 mfd: adp5585: Only add devices given in FW 
Not all devices (features) of the adp5585 device are mandatory to be
used in all platforms. Hence, check what's given in FW and dynamically
create the mfd_cell array to be given to devm_mfd_add_devices().

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-2-b1fcfe9e9826@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
 2025-07-01 21:50:50 +01:00
Nuno Sá
09d55a54b4 dt-bindings: mfd: adp5585: ease on the required properties 
It is not mandatory to use all the capabilities of the device. One can
very well only use it as a gpio controller without the PWM support. This
will be even more evident when support for the matrix keymap is added.
Hence drop the requirements for PWM and GPIO.

Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20250701-dev-adp5589-fw-v7-1-b1fcfe9e9826@analog.com
Signed-off-by: Lee Jones <lee@kernel.org>
 2025-07-01 21:50:50 +01:00
Bartosz Golaszewski
26981e8906 gpio: make gpiod_is_equal() arguments stricter 
It makes no sense for a GPIO descriptor comparator to return true when
the arguments passed to it are NULL or IS_ERR(). Let's validate both and
return false unless both are valid GPIO descriptors.

Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/all/Z_aFBfjb17JxOwyk@black.fi.intel.com/
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Link: https://lore.kernel.org/r/20250620-gpiod-is-equal-improv-v1-2-a75060505d2c@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
 2025-06-30 08:58:26 +02:00
Bartosz Golaszewski
08ad63bbd6 gpio: constify arguments of gpiod_is_equal() 
This function is not meant to modify the GPIO descriptors in any way so
we can safely constify both arguments.

Link: https://lore.kernel.org/r/20250620-gpiod-is-equal-improv-v1-1-a75060505d2c@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
 2025-06-30 08:58:26 +02:00
Geert Uytterhoeven
3315e39e56 gpio: rcar: Use new line value setter callbacks 
struct gpio_chip now has callbacks for setting line values that return
integers, so they can indicate failures.  Convert the driver to using
them.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/f09a0481fc0ddafb9aa05d903fbb42ef52332c03.1750838486.git.geert+renesas@glider.be
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
 2025-06-26 10:52:04 +02:00
Geert Uytterhoeven
28a9ab01f6 gpio: rcar: Remove checks for empty bankmasks 
The GPIO core never passes empty bankmasks to the callbacks for handling
multiple signals at once.  Remove the superfluous checks, and refactor
the code.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/29fb200d3f92e79cdd5ce4048d2847c265f337b4.1750838486.git.geert+renesas@glider.be
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
 2025-06-26 10:52:04 +02:00
Bartosz Golaszewski
23b33cf124 gpio: clps711x: drop unneeded platform_set_drvdata() 
There's no corresponding platform_get_drvdata() used in this module or
the higher-level gpio-mmio. Let's remove the unneeded call to
platform_set_drvdata().

Link: https://lore.kernel.org/r/20250618074653.25555-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
 2025-06-25 09:53:51 +02:00
Bartosz Golaszewski
cb908f3699 gpio: sa1100: use new GPIO line value setter callbacks 
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.

Link: https://lore.kernel.org/r/20250619-gpiochip-set-rv-gpio-v2-12-74abf689fbd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
 2025-06-23 09:25:46 +02:00
Bartosz Golaszewski
d68ddf651d gpio: rtd: use new GPIO line value setter callbacks 
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.

Link: https://lore.kernel.org/r/20250619-gpiochip-set-rv-gpio-v2-11-74abf689fbd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
 2025-06-23 09:25:46 +02:00
Bartosz Golaszewski
6731ad96e8 gpio: rockchip: use new GPIO line value setter callbacks 
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.

Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250619-gpiochip-set-rv-gpio-v2-10-74abf689fbd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
 2025-06-23 09:25:46 +02:00
Bartosz Golaszewski
76033f1f92 gpio: rdc321x: use new GPIO line value setter callbacks 
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.

Link: https://lore.kernel.org/r/20250619-gpiochip-set-rv-gpio-v2-8-74abf689fbd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
 2025-06-23 09:25:46 +02:00
Bartosz Golaszewski
309ea58111 gpio: rc5t583: use new GPIO line value setter callbacks 
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.

Link: https://lore.kernel.org/r/20250619-gpiochip-set-rv-gpio-v2-7-74abf689fbd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
 2025-06-23 09:25:46 +02:00
Bartosz Golaszewski
f1ff31c8ef gpio: pxa: use new GPIO line value setter callbacks 
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.

Link: https://lore.kernel.org/r/20250619-gpiochip-set-rv-gpio-v2-6-74abf689fbd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
 2025-06-23 09:25:46 +02:00
Bartosz Golaszewski
fecdef830c gpio: pmic-eic-sprd: drop unneeded .set() callback 
The lines on this chip are input-only. GPIO core can handle the missing
.set() callback so there's no need to implement a dummy here. Drop it.

Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250619-gpiochip-set-rv-gpio-v2-5-74abf689fbd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
 2025-06-23 09:25:46 +02:00
Bartosz Golaszewski
201e0f24a5 gpio: pl061: use new GPIO line value setter callbacks 
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250619-gpiochip-set-rv-gpio-v2-4-74abf689fbd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
 2025-06-23 09:25:46 +02:00
Bartosz Golaszewski
74260fb09c gpio: pch: use new GPIO line value setter callbacks 
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.

Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20250619-gpiochip-set-rv-gpio-v2-3-74abf689fbd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
 2025-06-23 09:25:46 +02:00
Bartosz Golaszewski
4027438be8 gpio: pcf857x: use new GPIO line value setter callbacks 
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.

Link: https://lore.kernel.org/r/20250619-gpiochip-set-rv-gpio-v2-2-74abf689fbd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
 2025-06-23 09:25:46 +02:00
Bartosz Golaszewski
40b71f1171 gpio: pca9570: use new GPIO line value setter callbacks 
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.

Link: https://lore.kernel.org/r/20250619-gpiochip-set-rv-gpio-v2-1-74abf689fbd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
 2025-06-23 09:25:45 +02:00
Daniel Sullivan
a0cfbc67d7 gpio: ts5500: use new GPIO line value setter callbacks 
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.

Signed-off-by: Daniel Sullivan <danieljsullivan7@gmail.com>
Link: https://lore.kernel.org/r/aFdKce3Go9iF4A6m@danv-Standard-PC-Q35-ICH9-2009
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
 2025-06-23 09:17:44 +02:00
Antonio Quartulli
e6bb78570f gpio: sysfs: fix use-after-free in error path 
When invoking device_create_with_groups(), its return value is stored
in `data->cdev_base`. However, in case of faiure, `data` is first freed
and then derefernced in order to return `data->cdev_base`.

Fix the use-after-free by extracting the error code before free'ing
`data`.

Fixes: fd19792851 ("gpio: sysfs: remove the mockdev pointer from struct gpio_device")
Addresses-Coverity-ID: 1644512 ("Memory - illegal accesses  (USE_AFTER_FREE)")
Signed-off-by: Antonio Quartulli <antonio@mandelbit.com>
Link: https://lore.kernel.org/r/20250622220221.28025-1-antonio@mandelbit.com
[Bartosz: added Fixes: tag, tweaked commit message]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
 2025-06-23 09:14:15 +02:00
Bartosz Golaszewski
fd19792851 gpio: sysfs: remove the mockdev pointer from struct gpio_device 
The usage of the mockdev pointer in struct gpio_device is limited to the
GPIO sysfs code. There's no reason to keep it in this top-level
structure. Create a separate structure containing the reference to the
GPIO device and the dummy class device that will be passed to
device_create_with_groups(). The !gdev->mockdev checks can be removed as
long as we make sure that all operations on the GPIO class are protected
with the sysfs lock.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250610-gpio-sysfs-chip-export-v1-6-a8c7aa4478b1@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
 2025-06-20 09:29:15 +02:00
Bartosz Golaszewski
982ec96c38 gpio: sysfs: remove unneeded headers 
No symbols from the linux/idr.h or linux/spinlock.h headers are used in
this file so remove them. We also don't technically need linux/list.h
currently but one of the follow-up commits will start using it so let's
leave it.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250610-gpio-sysfs-chip-export-v1-5-a8c7aa4478b1@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
 2025-06-20 09:29:14 +02:00
Bartosz Golaszewski
dc665b5248 gpio: sysfs: refactor the coding style 
Update the code to be more consistent with the rest of the codebase.
Mostly correctly align line-breaks, remove unneeded tabs, stray newlines
& spaces and tweak the comment style.

No functional change.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250610-gpio-sysfs-chip-export-v1-4-a8c7aa4478b1@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
 2025-06-20 09:29:14 +02:00
Bartosz Golaszewski
e1f02b40a7 gpio: sysfs: call mutex_destroy() in gpiod_unexport() 
While not critical, it's useful to have the corresponding call to
mutex_destroy() whenever we use mutex_init(). Add the call right before
kfreeing the GPIO data.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250610-gpio-sysfs-chip-export-v1-3-a8c7aa4478b1@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
 2025-06-20 09:29:14 +02:00
Bartosz Golaszewski
1ae8603074 Documentation: gpio: document the active_low field in the sysfs ABI 
Exported GPIO lines also have the active_low attribute which is not
documented. Add a short mention for it.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250610-gpio-sysfs-chip-export-v1-2-a8c7aa4478b1@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
 2025-06-20 09:29:14 +02:00
Bartosz Golaszewski
5ed0d32805 Documentation: gpio: undocument removed behavior 
Since commit 700cdf7ed0 ("gpio: sysfs: make the sysfs export behavior
consistent"), named GPIO lines are no longer exported in sysfs as links
named after the them. Drop the misleading bit from the ABI docs.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250610-gpio-sysfs-chip-export-v1-1-a8c7aa4478b1@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
 2025-06-20 09:29:14 +02:00
Bartosz Golaszewski
9da895e970 platform: cznic: use new GPIO line value setter callbacks 
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.

Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20250610-gpiochip-set-rv-platform-cznic-v1-1-30afd2444756@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
 2025-06-19 09:15:05 +02:00
Bartosz Golaszewski
cbb887a76b gpio: mmio: don't use legacy GPIO chip setters 
We've converted this driver to using the new GPIO line value setters but
missed the instances where the legacy callback is accessed directly using
the function pointer. This will lead to a NULL-pointer dereference as
this pointer is no longer populated. The issue needs fixing locally as
well as in the already converted previously users of gpio-mmio.

Fixes: b908d35d00 ("gpio: mmio: use new GPIO line value setter callbacks")
Reported-by: Klara Modin <klarasmodin@gmail.com>
Closes: https://lore.kernel.org/all/2rw2sncevdiyirpdovotztlg77apcq2btzytuv5jnm55aqhlne@swtts3hl53tw/
Tested-by: Klara Modin <klarasmodin@gmail.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250618-gpio-mmio-fix-setter-v1-2-2578ffb77019@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
 2025-06-19 09:13:44 +02:00
Bartosz Golaszewski
1fd7d21095 gpio: npcm-sgpio: don't use legacy GPIO chip setters 
We've converted this driver to using the new GPIO line value setters but
missed the instance where the legacy callback is accessed directly using
the function pointer. This will lead to a NULL-pointer dereference as
this pointer is no longer populated. Fix it.

Fixes: 0e1a8930c9 ("gpio: npcm-sgpio: use new GPIO line value setter callbacks")
Link: https://lore.kernel.org/r/20250618-gpio-mmio-fix-setter-v1-1-2578ffb77019@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
 2025-06-19 09:13:44 +02:00
Bartosz Golaszewski
0a00514881 Merge tag 'gpio-mmio-bgpiof-no-input-flag-for-v6.17' into gpio/for-next 
Immutable tag for the pinctrl tree to pull from

Add the BGPIOF_NO_INPUT to the gpio-mmio API.
 2025-06-19 09:10:20 +02:00
Clément Le Goffic
deefc70834 gpio: mmio: add BGPIOF_NO_INPUT flag for GPO gpiochip 
When using bgpio_init with a gpiochip acting as a GPO (output only), the
gpiochip ops `direction_input` was set to `bgpio_simple_dir_in` by
default but we have no input ability.

Adding this flag allows to set a valid ops for the `direction_output`
ops without setting a valid ops for `direction_input` by default.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Clément Le Goffic <clement.legoffic@foss.st.com>
Link: https://lore.kernel.org/r/20250613-hdp-upstream-v5-1-6fd6f0dc527c@foss.st.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
 2025-06-19 09:05:33 +02:00
Sakari Ailus
cd4da713f9 Documentation: PM: *_autosuspend() functions update last busy time 
Document that the *_autosuspend() variants of the Runtime PM functions
update the last busy timestamp.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20250616061212.2286741-7-sakari.ailus@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2025-06-18 21:41:08 +02:00
Sakari Ailus
18c1fe53d1 PM: runtime: Mark last busy stamp in pm_request_autosuspend() 
Set device's last busy timestamp to current time in
pm_request_autosuspend().

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20250616061212.2286741-6-sakari.ailus@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2025-06-18 21:41:08 +02:00
Sakari Ailus
08071e64cb PM: runtime: Mark last busy stamp in pm_runtime_autosuspend() 
Set device's last busy timestamp to current time in
pm_runtime_autosuspend().

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20250616061212.2286741-5-sakari.ailus@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2025-06-18 21:41:08 +02:00
Sakari Ailus
e24e0630b5 PM: runtime: Mark last busy stamp in pm_runtime_put_sync_autosuspend() 
Set device's last busy timestamp to current time in
pm_runtime_put_sync_autosuspend().

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20250616061212.2286741-4-sakari.ailus@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2025-06-18 21:41:08 +02:00
Sakari Ailus
b3db492e83 PM: runtime: Mark last busy stamp in pm_runtime_put_autosuspend() 
Set device's last busy timestamp to current time in
pm_runtime_put_autosuspend(). Callers wishing not to do that will need to
use __pm_runtime_put_autosuspend().

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20250616061212.2286741-3-sakari.ailus@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2025-06-18 21:41:08 +02:00
Sakari Ailus
271ff96d60 PM: runtime: Document return values of suspend-related API functions 
Document return values for device suspend and idle related API
functions.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://patch.msgid.link/20250616061212.2286741-2-sakari.ailus@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
 2025-06-18 21:41:08 +02:00
Rob Herring (Arm)
7b20980ffc dt-bindings: gpio: arm,pl061: Drop interrupt properties as required 
It is possible that the PL061 doesn't have any interrupt connected and
can't be an interrupt provider, so drop the interrupt properties as
required.

The LG LG131x SoCs are one example of this.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250609220900.3035642-1-robh@kernel.org
[Bartosz: g/pl011/pl061/]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
 2025-06-18 12:21:31 +02:00
Bartosz Golaszewski
f3763403a6 gpio: palmas: use new GPIO line value setter callbacks 
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.

Link: https://lore.kernel.org/r/20250610-gpiochip-set-rv-gpio-v1-12-3a9a3c1472ff@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
 2025-06-17 11:09:31 +02:00
Bartosz Golaszewski
57065d62e6 gpio: omap: use new GPIO line value setter callbacks 
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.

Link: https://lore.kernel.org/r/20250610-gpiochip-set-rv-gpio-v1-11-3a9a3c1472ff@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
 2025-06-17 11:09:31 +02:00
Bartosz Golaszewski
f026145614 gpio: octeon: use new GPIO line value setter callbacks 
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.

Link: https://lore.kernel.org/r/20250610-gpiochip-set-rv-gpio-v1-10-3a9a3c1472ff@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
 2025-06-17 11:09:31 +02:00