Instead of requiring the test cases specifying both the length and
expected output, take the length from the expected output.
Tests that expect the output be truncated are changed to specify
the un-truncated output.
Change the strncmp() to a memcmp() with an extra check that the
output is actually terminated.
Append a '+' to the printed output (after the final ") when the output
is truncated.
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260302101815.3043-6-david.laight.linux@gmail.com
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Implement u[64]to[ah]_r() using a common function that uses multiply
by reciprocal to generate the least significant digit first and then
reverses the string.
On 32bit this is five multiplies (with 64bit product) for each output
digit. I think the old utoa_r() always did 36 multiplies and a lot
of subtracts - so this is likely faster even for 32bit values.
Definitely better for 64bit values (especially small ones).
Clearly shifts are faster for base 16, but reversing the output buffer
makes a big difference.
Sharing the code reduces the footprint (unless gcc decides to constant
fold the functions).
Definitely helps vfprintf() where the constants get loaded and a single
call is done.
Also makes it cheap to add octal support to vfprintf for completeness.
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Link: https://patch.msgid.link/20260223101735.2922-3-david.laight.linux@gmail.com
Acked-by: Willy Tarreau <w@1wt.eu>
[Thomas: skip int128 multiplication on SPARC and clang]
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Many systems don't have strlcpy() or strlcat() and readdir_r() is
deprecated. This makes the tests fail to build with the host headers.
Disable the 'directories' test and define strlcpy(), strlcat() and
readdir_r() using #defines so that the code compiles.
Fixes: 6fe8360b16 ("selftests/nolibc: also test libc-test through regular selftest framework")
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Link: https://patch.msgid.link/20260223101735.2922-4-david.laight.linux@gmail.com
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
fwrite() modifying errno is non-standard.
Only validate this behavior on those libc implementations which
implement it.
Fixes: a5f00be9b3 ("tools/nolibc: Add a simple test for writing to a FILE and reading it back")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
The naming convention of the my_syscallX() macros is a bit unfortunate.
They may conflict with application code and the name is very generic.
Switch to __nolibc_syscallX(). The leading underscores place the symbols
in the implementation-defined namespace, avoiding conflicting names.
It is also clearer that these are non-standard extensions from nolibc.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260223-nolibc-namespacing-v1-1-52574ffebb2c@weissschuh.net
Pull rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Pass '-Zunstable-options' flag required by the future Rust 1.95.0
- Fix 'objtool' warning for Rust 1.84.0
'kernel' crate:
- 'irq' module: add missing bound detected by the future Rust 1.95.0
- 'list' module: add missing 'unsafe' blocks and placeholder safety
comments to macros (an issue for future callers within the crate)
'pin-init' crate:
- Clean Clippy warning that changed behavior in the future Rust
1.95.0"
* tag 'rust-fixes-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: list: Add unsafe blocks for container_of and safety comments
rust: pin-init: replace clippy `expect` with `allow`
rust: irq: add `'static` bounds to irq callbacks
objtool/rust: add one more `noreturn` Rust function
rust: kbuild: pass `-Zunstable-options` for Rust 1.95.0
Pull perf tools updates from Arnaldo Carvalho de Melo:
- Introduce 'perf sched stats' tool with record/report/diff workflows
using schedstat counters
- Add a faster libdw based addr2line implementation and allow selecting
it or its alternatives via 'perf config addr2line.style='
- Data-type profiling fixes and improvements including the ability to
select fields using 'perf report''s -F/-fields, e.g.:
'perf report --fields overhead,type'
- Add 'perf test' regression tests for Data-type profiling with C and
Rust workloads
- Fix srcline printing with inlines in callchains, make sure this has
coverage in 'perf test'
- Fix printing of leaf IP in LBR callchains
- Fix display of metrics without sufficient permission in 'perf stat'
- Print all machines in 'perf kvm report -vvv', not just the host
- Switch from SHA-1 to BLAKE2s for build ID generation, remove SHA-1
code
- Fix 'perf report's histogram entry collapsing with '-F' option
- Use system's cacheline size instead of a hardcoded value in 'perf
report'
- Allow filtering conversion by time range in 'perf data'
- Cover conversion to CTF using 'perf data' in 'perf test'
- Address newer glibc const-correctness (-Werror=discarded-qualifiers)
issues
- Fixes and improvements for ARM's CoreSight support, simplify ARM SPE
event config in 'perf mem', update docs for 'perf c2c' including the
ARM events it can be used with
- Build support for generating metrics from arch specific python
script, add extra AMD, Intel, ARM64 metrics using it
- Add AMD Zen 6 events and metrics
- Add JSON file with OpenHW Risc-V CVA6 hardware counters
- Add 'perf kvm' stats live testing
- Add more 'perf stat' tests to 'perf test'
- Fix segfault in `perf lock contention -b/--use-bpf`
- Fix various 'perf test' cases for s390
- Build system cleanups, bump minimum shellcheck version to 0.7.2
- Support building the capstone based annotation routines as a plugin
- Allow passing extra Clang flags via EXTRA_BPF_FLAGS
* tag 'perf-tools-for-v7.0-1-2026-02-21' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (255 commits)
perf test script: Add python script testing support
perf test script: Add perl script testing support
perf script: Allow the generated script to be a path
perf test: perf data --to-ctf testing
perf test: Test pipe mode with data conversion --to-json
perf json: Pipe mode --to-ctf support
perf json: Pipe mode --to-json support
perf check: Add libbabeltrace to the listed features
perf build: Allow passing extra Clang flags via EXTRA_BPF_FLAGS
perf test data_type_profiling.sh: Skip just the Rust tests if code_with_type workload is missing
tools build: Fix feature test for rust compiler
perf libunwind: Fix calls to thread__e_machine()
perf stat: Add no-affinity flag
perf evlist: Reduce affinity use and move into iterator, fix no affinity
perf evlist: Missing TPEBS close in evlist__close()
perf evlist: Special map propagation for tool events that read on 1 CPU
perf stat-shadow: In prepare_metric fix guard on reading NULL perf_stat_evsel
Revert "perf tool_pmu: More accurately set the cpus for tool events"
tools build: Emit dependencies file for test-rust.bin
tools build: Make test-rust.bin be removed by the 'clean' target
...
Pull sched_ext fixes from Tejun Heo:
- Various bug fixes for the example schedulers and selftests
* tag 'sched_ext-for-7.0-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
tools/sched_ext: fix getopt not re-parsed on restart
tools/sched_ext: scx_userland: fix data races on shared counters
tools/sched_ext: scx_pair: fix stride == 0 crash on single-CPU systems
tools/sched_ext: scx_central: fix CPU_SET and skeleton leak on early exit
tools/sched_ext: scx_userland: fix stale data on restart
tools/sched_ext: scx_flatcg: fix potential stack overflow from VLA in fcg_read_stats
selftests/sched_ext: Fix rt_stall flaky failure
tools/sched_ext: scx_userland: fix restart and stats thread lifecycle bugs
tools/sched_ext: scx_central: fix sched_setaffinity() call with the set size
tools/sched_ext: scx_flatcg: zero-initialize stats counter array
After goto restart, optind retains its advanced position from the
previous getopt loop, causing getopt() to immediately return -1.
This silently drops all command-line options on the restarted skeleton.
Reset optind to 1 at the restart label so options are re-parsed.
Affected schedulers: scx_simple, scx_central, scx_flatcg, scx_pair,
scx_sdt, scx_cpu0.
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The stats thread reads nr_vruntime_enqueues, nr_vruntime_dispatches,
nr_vruntime_failed, and nr_curr_enqueued concurrently with the main
thread writing them, with no synchronization.
Use __atomic builtins with relaxed ordering for all accesses to these
counters to eliminate the data races.
Only display accuracy is affected, not scheduling correctness.
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Including fixes from Netfilter.
Current release - new code bugs:
- net: fix backlog_unlock_irq_restore() vs CONFIG_PREEMPT_RT
- eth: mlx5e: XSK, Fix unintended ICOSQ change
- phy_port: correctly recompute the port's linkmodes
- vsock: prevent child netns mode switch from local to global
- couple of kconfig fixes for new symbols
Previous releases - regressions:
- nfc: nci: fix false-positive parameter validation for packet data
- net: do not delay zero-copy skbs in skb_attempt_defer_free()
Previous releases - always broken:
- mctp: ensure our nlmsg responses to user space are zero-initialised
- ipv6: ioam: fix heap buffer overflow in __ioam6_fill_trace_data()
- fixes for ICMP rate limiting
Misc:
- intel: fix PCI device ID conflict between i40e and ipw2200"
* tag 'net-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits)
net: nfc: nci: Fix parameter validation for packet data
net/mlx5e: Use unsigned for mlx5e_get_max_num_channels
net/mlx5e: Fix deadlocks between devlink and netdev instance locks
net/mlx5e: MACsec, add ASO poll loop in macsec_aso_set_arm_event
net/mlx5: Fix misidentification of write combining CQE during poll loop
net/mlx5e: Fix misidentification of ASO CQE during poll loop
net/mlx5: Fix multiport device check over light SFs
bonding: alb: fix UAF in rlb_arp_recv during bond up/down
bnge: fix reserving resources from FW
eth: fbnic: Advertise supported XDP features.
rds: tcp: fix uninit-value in __inet_bind
net/rds: Fix NULL pointer dereference in rds_tcp_accept_one
octeontx2-af: Fix default entries mcam entry action
net/mlx5e: XSK, Fix unintended ICOSQ change
ipv6: icmp: icmpv6_xrlim_allow() optimization if net.ipv6.icmp.ratelimit is zero
ipv4: icmp: icmpv4_xrlim_allow() optimization if net.ipv4.icmp_ratelimit is zero
ipv6: icmp: remove obsolete code in icmpv6_xrlim_allow()
inet: move icmp_global_{credit,stamp} to a separate cache line
icmp: prevent possible overflow in icmp_global_allow()
selftests/net: packetdrill: add ipv4-mapped-ipv6 tests
...
Pull bpf fixes from Alexei Starovoitov:
- Fix invalid write loop logic in libbpf's bpf_linker__add_buf() (Amery
Hung)
- Fix a potential use-after-free of BTF object (Anton Protopopov)
- Add feature detection to libbpf and avoid moving arena global
variables on older kernels (Emil Tsalapatis)
- Remove extern declaration of bpf_stream_vprintk() from libbpf headers
(Ihor Solodrai)
- Fix truncated netlink dumps in bpftool (Jakub Kicinski)
- Fix map_kptr grace period wait in bpf selftests (Kumar Kartikeya
Dwivedi)
- Remove hexdump dependency while building bpf selftests (Matthieu
Baerts)
- Complete fsession support in BPF trampolines on riscv (Menglong Dong)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Remove hexdump dependency
libbpf: Remove extern declaration of bpf_stream_vprintk()
selftests/bpf: Use vmlinux.h in test_xdp_meta
bpftool: Fix truncated netlink dumps
libbpf: Delay feature gate check until object prepare time
libbpf: Do not use PROG_TYPE_TRACEPOINT program for feature gating
bpf: Add a map/btf from a fd array more consistently
selftests/bpf: Fix map_kptr grace period wait
selftests/bpf: enable fsession_test on riscv64
selftests/bpf: Adjust selftest due to function rename
bpf, riscv: add fsession support for trampolines
bpf: Fix a potential use-after-free of BTF object
bpf, riscv: introduce emit_store_stack_imm64() for trampoline
libbpf: Fix invalid write loop logic in bpf_linker__add_buf()
libbpf: Add gating for arena globals relocation feature
Pull more non-MM updates from Andrew Morton:
- "two fixes in kho_populate()" fixes a couple of not-major issues in
the kexec handover code (Ran Xiaokai)
- misc singletons
* tag 'mm-nonmm-stable-2026-02-18-19-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
lib/group_cpus: handle const qualifier from clusters allocation type
kho: remove unnecessary WARN_ON(err) in kho_populate()
kho: fix missing early_memunmap() call in kho_populate()
scripts/gdb: implement x86_page_ops in mm.py
objpool: fix the overestimation of object pooling metadata size
selftests/memfd: use IPC semaphore instead of SIGSTOP/SIGCONT
delayacct: fix build regression on accounting tool
Pull more MM updates from Andrew Morton:
- "mm/vmscan: fix demotion targets checks in reclaim/demotion" fixes a
couple of issues in the demotion code - pages were failed demotion
and were finding themselves demoted into disallowed nodes (Bing Jiao)
- "Remove XA_ZERO from error recovery of dup_mmap()" fixes a rare
mapledtree race and performs a number of cleanups (Liam Howlett)
- "mm: add bitmap VMA flag helpers and convert all mmap_prepare to use
them" implements a lot of cleanups following on from the conversion
of the VMA flags into a bitmap (Lorenzo Stoakes)
- "support batch checking of references and unmapping for large folios"
implements batching to greatly improve the performance of reclaiming
clean file-backed large folios (Baolin Wang)
- "selftests/mm: add memory failure selftests" does as claimed (Miaohe
Lin)
* tag 'mm-stable-2026-02-18-19-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (36 commits)
mm/page_alloc: clear page->private in free_pages_prepare()
selftests/mm: add memory failure dirty pagecache test
selftests/mm: add memory failure clean pagecache test
selftests/mm: add memory failure anonymous page test
mm: rmap: support batched unmapping for file large folios
arm64: mm: implement the architecture-specific clear_flush_young_ptes()
arm64: mm: support batch clearing of the young flag for large folios
arm64: mm: factor out the address and ptep alignment into a new helper
mm: rmap: support batched checks of the references for large folios
tools/testing/vma: add VMA userland tests for VMA flag functions
tools/testing/vma: separate out vma_internal.h into logical headers
tools/testing/vma: separate VMA userland tests into separate files
mm: make vm_area_desc utilise vma_flags_t only
mm: update all remaining mmap_prepare users to use vma_flags_t
mm: update shmem_[kernel]_file_*() functions to use vma_flags_t
mm: update secretmem to use VMA flags on mmap_prepare
mm: update hugetlbfs to use VMA flags on mmap_prepare
mm: add basic VMA flag operation helper functions
tools: bitmap: add missing bitmap_[subset(), andnot()]
mm: add mk_vma_flags() bitmap flag macro helper
...
The verification signature header generation requires converting a
binary certificate to a C array. Previously this only worked with xxd,
and a switch to hexdump has been done in commit b640d556a2
("selftests/bpf: Remove xxd util dependency").
hexdump is a more common utility program, yet it might not be installed
by default. When it is not installed, BPF selftests build without
errors, but tests_progs is unusable: it exits with the 255 code and
without any error messages. When manually reproducing the issue, it is
not too hard to find out that the generated verification_cert.h file is
incorrect, but that's time consuming. When digging the BPF selftests
build logs, this line can be seen amongst thousands others, but ignored:
/bin/sh: 2: hexdump: not found
Here, od is used instead of hexdump. od is coming from the coreutils
package, and this new od command produces the same output when using od
from GNU coreutils, uutils, and even busybox. This is more portable, and
it produces a similar results to what was done before with hexdump:
there is an extra comma at the end instead of trailing whitespaces,
but the C code is not impacted.
Fixes: b640d556a2 ("selftests/bpf: Remove xxd util dependency")
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/r/20260218-bpf-sft-hexdump-od-v2-1-2f9b3ee5ab86@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull Kbuild fixes from Nathan Chancellor:
- Ensure tools/objtool is cleaned by 'make clean' and 'make mrproper'
- Fix test program for CONFIG_CC_CAN_LINK to avoid a warning, which is
made fatal by -Werror
- Drop explicit LZMA parallel compression in scripts/make_fit.py
- Several fixes for commit 62089b8048 ("kbuild: rpm-pkg: Generate
debuginfo package manually")
* tag 'kbuild-fixes-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: rpm-pkg: Disable automatic requires for manual debuginfo package
kbuild: rpm-pkg: Fix manual debuginfo generation when using .src.rpm
kernel: rpm-pkg: Restore find-debuginfo.sh approach to -debuginfo package
kbuild: rpm-pkg: Restrict manual debug package creation
scripts/make_fit.py: Drop explicit LZMA parallel compression
kbuild: Fix CC_CAN_LINK detection
kbuild: Add objtool to top-level clean target
Pull turbostat fix from Len Brown:
"Fix a recent AMD regression due to errant code cleanup"
* tag 'turbostat-2026.02.14-AMD-RAPL-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: Fix AMD RAPL regression
nr_cpu_ids / 2 produces stride 0 on a single-CPU system, which later
causes SCX_BUG_ON(i == j) to fire. Validate stride after option
parsing to also catch invalid user-supplied values via -S.
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Use CPU_SET_S() instead of CPU_SET() on the dynamically allocated
cpuset to avoid a potential out-of-bounds write when nr_cpu_ids
exceeds CPU_SETSIZE.
Also destroy the skeleton before returning on invalid central CPU ID
to prevent a resource leak.
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
turbostat.c:8688: rapl_perf_init: Assertion `next_domain < num_domains' failed.
Two recent cleanup patches that were not supposed to change anything
broke the core_id code needed for AMD RAPL initialization:
commit 070e92361e ("tools/power turbostat: Enhance HT enumeration")
commit ddf60e38ca ("tools/power turbostat: Simplify global core_id calculation")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Len Brown <len.brown@intel.com>
Since we started running selftests in NIPA we have been seeing
tc_actions.sh generate a soft lockup warning on ~20% of the runs.
On the pre-netdev foundation setup it was actually a missed irq
splat from the console. Now it's either that or a lockup.
I initially suspected a socket locking issue since the test
is exercising local loopback with act_mirred.
After hours of staring at this I noticed in strace that ncat
when -o $file is specified _both_ saves the output to the file
and still prints it to stdout. Because the file being sent
is constructed with:
dd conv=sparse status=none if=/dev/zero bs=1M count=2 of=$mirred
^^^^^^^^^
the data printed is all \0. Most terminals don't display nul
characters (and neither does vng output capture save them).
But QEMU's serial console still has to poke them thru which
is very slow and causes the lockup (if the file is >600kB).
Replace the '-o $file' with '> $file'. This speeds the test up
from 2m20s to 18s on debug kernels, and prevents the warnings.
Fixes: ca22da2fbd ("act_mirred: use the backlog for nested calls to mirred ingress")
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260214035159.2119699-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Netlink requires that the recv buffer used during dumps is at least
min(PAGE_SIZE, 8k) (see the man page). Otherwise the messages will
get truncated. Make sure bpftool follows this requirement, avoid
missing information on systems with large pages.
Acked-by: Quentin Monnet <qmo@kernel.org>
Fixes: 7084566a23 ("tools/bpftool: Remove libbpf_internal.h usage in bpftool")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20260217194150.734701-1-kuba@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull turbostat updates from Len Brown:
- Add L2 statistics columns for recent Intel processors:
L2MRPS = L2 Cache M-References Per Second
L2%hit = L2 Cache Hit %
- Sort work and output by cpu# rather than core#
- Minor features and fixes
* tag 'turbostat-2026.02.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (23 commits)
tools/power turbostat: version 2026.02.14
tools/power turbostat: Fix and document --header_iterations
tools/power turbostat: Use strtoul() for iteration parsing
tools/power turbostat: Favor cpu# over core#
tools/power turbostat: Expunge logical_cpu_id
tools/power turbostat: Enhance HT enumeration
tools/power turbostat: Simplify global core_id calculation
tools/power turbostat: Unify even/odd/average counter referencing
tools/power turbostat: Allocate average counters dynamically
tools/power turbostat: Delete core_data.core_id
tools/power turbostat: Rename physical_core_id to core_id
tools/power turbostat: Cleanup package_id
tools/power turbostat: Cleanup internal use of "base_cpu"
tools/power turbostat: Add L2 cache statistics
tools/power turbostat: Remove redundant newlines from err(3) strings
tools/power turbostat: Allow more use of is_hybrid flag
tools/power turbostat: Rename "LLCkRPS" column to "LLCMRPS"
tools/power turbostat.8: Document the "--force" option
tools/power turbostat: Harden against unexpected values
tools/power turbostat: Dump hypervisor name
...
Commit 728ff16791 ("libbpf: Add gating for arena globals relocation feature")
adds a feature gate check that loads a map and BPF program to
test the running kernel supports large direct offsets for LDIMM64
instructions. This check is currently used to calculate arena symbol
offsets during bpf_object__collect_relos, itself called by
bpf_object_open.
However, the program calling bpf_object_open may not have the permissions to
load maps and programs. This is the case with the BPF selftests, where
bpftool is invoked at compilation time during skeleton generation. This
causes errors as the feature gate unexpectedly fails with -EPERM.
Avoid this by moving all the use of the FEAT_LDIMM64_FULL_RANGE_OFF feature gate
to BPF object preparation time instead.
Fixes: 728ff16791 ("libbpf: Add gating for arena globals relocation feature")
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260217204345.548648-3-emil@etsalapatis.com
Commit 728ff16791 uses a PROG_TYPE_TRACEPOINT BPF test program to
check whether the running kernel supports large LDIMM64 offsets. The
feature gate incorrectly assumes that the program will fail at
verification time with one of two messages, depending on whether the
feature is supported by the running kernel. However,
PROG_TYPE_TRACEPOINT programs may fail to load before verification even
starts, e.g., if the shell does not have the appropriate capabilities.
Use a BPF_PROG_TYPE_SOCKET_FILTER program for the feature gate instead.
Also fix two minor issues. First, ensure the log buffer for the test is
initialized: Failing program load before verification led to libbpf dumping
uninitialized data to stdout. Also, ensure that close() is only called
for program_fd in the probe if the program load actually succeeded. The
call was currently failing silently with -EBADF most of the time.
Fixes: 728ff16791 ("libbpf: Add gating for arena globals relocation feature")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260217204345.548648-2-emil@etsalapatis.com
Pull USB / Thunderbolt updates from Greg KH:
"Here is the "big" set of USB and Thunderbolt driver updates for
7.0-rc1. Overall more lines were removed than added, thanks to
dropping the obsolete isp1362 USB host controller driver, always a
nice change.
Other than that, nothing major happening here, highlights are:
- lots of dwc3 driver updates and new hardware support added
- usb gadget function driver updates
- usb phy driver updates
- typec driver updates and additions
- USB rust binding updates for syntax and formatting changes
- more usb serial device ids added
- other smaller USB core and driver updates and additions
All of these have been in linux-next for a long time, with no reported
problems"
* tag 'usb-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (77 commits)
usb: typec: ucsi: Add Thunderbolt alternate mode support
usb: typec: hd3ss3220: Check if regulator needs to be switched
usb: phy: tegra: parametrize PORTSC1 register offset
usb: phy: tegra: parametrize HSIC PTS value
usb: phy: tegra: return error value from utmi_wait_register
usb: phy: tegra: cosmetic fixes
dt-bindings: usb: renesas,usbhs: Add RZ/G3E SoC support
usb: dwc2: fix resume failure if dr_mode is host
usb: cdns3: fix role switching during resume
usb: dwc3: gadget: Move vbus draw to workqueue context
USB: serial: option: add Telit FN920C04 RNDIS compositions
usb: dwc3: Log dwc3 address in traces
usb: gadget: tegra-xudc: Add handling for BLCG_COREPLL_PWRDN
usb: phy: tegra: add HSIC support
usb: phy: tegra: use phy type directly
usb: typec: ucsi: Enforce mode selection for cros_ec_ucsi
usb: typec: ucsi: Support mode selection to activate altmodes
usb: typec: Introduce mode_selection bit
usb: typec: Implement mode selection
usb: typec: Expose alternate mode priority via sysfs
...
The tests use the tc pedit action to modify the IPv4 source address
("pedit ex munge ip src set"), but the IP header checksum is not
recalculated after the modification. As a result, the modified packet
fails sanity checks in br_netfilter after bridging and is dropped,
which causes the test to fail.
Fix this by ensuring net.bridge.bridge-nf-call-iptables is set to 0
during the test execution. This prevents the bridge from passing
L2 traffic to netfilter, bypassing the checksum validation that
causes the test failure.
Fixes: 92ad382894 ("selftests: forwarding: Add a test for pedit munge SIP and DIP")
Fixes: 226657ba23 ("selftests: forwarding: Add a forwarding test for pedit munge dsfield")
Signed-off-by: Aleksei Oladko <aleksey.oladko@virtuozzo.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260213131907.43351-4-aleksey.oladko@virtuozzo.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The test generates VXLAN traffic using mausezahn, where the encapsulated
inner IPv6 packet has an incorrect payload length set in the IPv6 header.
After VXLAN decapsulation, such packets do not pass sanity checks in
br_netfilter and are dropped, which causes the test to fail.
Fix this by setting the correct IPv6 payload length for the encapsulated
packet generated by mausezahn, so that the packet is accepted
by br_netfilter.
tools/testing/selftests/net/forwarding/vxlan_bridge_1d_ipv6.sh
lines 698-706
)"00:03:"$( : Payload length
)"3a:"$( : Next header
)"04:"$( : Hop limit
)"$saddr:"$( : IP saddr
)"$daddr:"$( : IP daddr
)"80:"$( : ICMPv6.type
)"00:"$( : ICMPv6.code
)"00:"$( : ICMPv6.checksum
)
Data after IPv6 header:
• 80: — 1 byte (ICMPv6 type)
• 00: — 1 byte (ICMPv6 code)
• 00: — 1 byte (ICMPv6 checksum, truncated)
Total: 3 bytes → 00:03 is correct. The old value 00:08 did not match
the actual payload size.
Fixes: b07e9957f2 ("selftests: forwarding: Add VxLAN tests with a VLAN-unaware bridge for IPv6")
Signed-off-by: Aleksei Oladko <aleksey.oladko@virtuozzo.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260213131907.43351-3-aleksey.oladko@virtuozzo.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The test generates VXLAN traffic using mausezahn, where the encapsulated
inner IPv4 packet contains a zero IP header checksum. After VXLAN
decapsulation, such packets do not pass sanity checks in br_netfilter
and are dropped, which causes the test to fail.
Fix this by calculating and setting a valid IPv4 header checksum for the
encapsulated packet generated by mausezahn, so that the packet is accepted
by br_netfilter. Fixed by using the payload_template_calc_checksum() /
payload_template_expand_checksum() helpers that are only available
in v6.3 and newer kernels.
Fixes: a0b61f3d8e ("selftests: forwarding: vxlan_bridge_1d: Add an ECN decap test")
Signed-off-by: Aleksei Oladko <aleksey.oladko@virtuozzo.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260213131907.43351-2-aleksey.oladko@virtuozzo.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add check_rx_hds test that verifies header/data split works across
payload sizes. The test sweeps payload sizes from 1 byte to 8KB, if any
data propagates up to userspace as SCM_DEVMEM_LINEAR, then the test
fails. This shows that regardless of payload size, ncdevmem's
configuration of hds-thresh to 0 is respected.
Add -L (--fail-on-linear) flag to ncdevmem that causes the receiver to
fail if any SCM_DEVMEM_LINEAR cmsg is received.
Use socat option for fixed block sizing and tcp nodelay to disable
nagle's algo to avoid buffering.
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260211-fbnic-tcp-hds-fixes-v1-4-55d050e6f606@meta.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reset all counters, tasks and vruntime_head list on restart.
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
fcg_read_stats() had a VLA allocating 21 * nr_cpus * 8 bytes on the
stack, risking stack overflow on large CPU counts (nr_cpus can be up
to 512).
Fix by using a single heap allocation with the correct size, reusing
it across all stat indices, and freeing it at the end.
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull documentation fixes from Jonathan Corbet:
"A handful of small, late-arriving documentation fixes"
* tag 'docs-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux:
docs: toshiba_haps: fix grammar error in SSD warning
Docs/mm: fix typos and grammar in page_tables.rst
Docs/core-api: fix typos in rbtree.rst
docs: clarify wording in programming-language.rst
docs: process: maintainer-pgp-guide: update kernel.org docs link
docs: kdoc_parser: allow __exit in function prototypes
Pull LoongArch updates from Huacai Chen:
- Select HAVE_CMPXCHG_{LOCAL,DOUBLE}
- Add 128-bit atomic cmpxchg support
- Add HOTPLUG_SMT implementation
- Wire up memfd_secret system call
- Fix boot errors and unwind errors for KASAN
- Use BPF prog pack allocator and add BPF arena support
- Update dts files to add nand controllers
- Some bug fixes and other small changes
* tag 'loongarch-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: dts: loongson-2k1000: Add nand controller support
LoongArch: dts: loongson-2k0500: Add nand controller support
LoongArch: BPF: Implement bpf_addr_space_cast instruction
LoongArch: BPF: Implement PROBE_MEM32 pseudo instructions
LoongArch: BPF: Use BPF prog pack allocator
LoongArch: Use IS_ERR_PCPU() macro for KGDB
LoongArch: Rework KASAN initialization for PTW-enabled systems
LoongArch: Disable instrumentation for setup_ptwalker()
LoongArch: Remove some extern variables in source files
LoongArch: Guard percpu handler under !CONFIG_PREEMPT_RT
LoongArch: Handle percpu handler address for ORC unwinder
LoongArch: Use %px to print unmodified unwinding address
LoongArch: Prefer top-down allocation after arch_mem_init()
LoongArch: Add HOTPLUG_SMT implementation
LoongArch: Make cpumask_of_node() robust against NUMA_NO_NODE
LoongArch: Wire up memfd_secret system call
LoongArch: Replace seq_printf() with seq_puts() for simple strings
LoongArch: Add 128-bit atomic cmpxchg support
LoongArch: Add detection for SC.Q support
LoongArch: Select HAVE_CMPXCHG_LOCAL in Kconfig
Pull memblock updates from Mike Rapoport:
- update tools/include/linux/mm.h to fix memblock tests compilation
- drop redundant struct page* parameter from memblock_free_pages() and
get struct page from the pfn
- add underflow detection for size calculation in memtest and warn
about underflow when VM_DEBUG is enabled
* tag 'memblock-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
mm/memtest: add underflow detection for size calculation
memblock: drop redundant 'struct page *' argument from memblock_free_pages()
memblock test: include <linux/sizes.h> from tools mm.h stub
Pull bootconfig updates from Masami Hiramatsu:
- Update the bootconfig parser to stop searching for a value when it
encounters a newline character
- Update the tests for bootconfig parser to ensure the good examples to
be parsed correctly by comparing the expected results
* tag 'bootconfig-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
bootconfig: Check the parsed output of the good examples
bootconfig: Terminate value search if it hits a newline
Pull x86 platform driver updates from Ilpo Järvinen:
"Highlights:
- amd/pmf:
- Avoid overwriting BIOS input values when events occur rapidly
- Fix PMF driver issues related to S4 (in part on crypto/ccp side)
- Add NPU metrics API (for accel side consumers)
- Allow disabling Smart PC function through a module parameter
- asus-wmi & HID/asus:
- Unification of backlight control (replaces quirks)
- Support multiple interfaces for controlling keyboard/RGB brightness
- Simplify init sequence
- hp-wmi:
- Add manual fan control for Victus S models
- Add fan mode keep-alive
- Fix platform profile values for Omen 16-wf1xxx
- Add EC offset to get the thermal profile
- intel/pmc: Show substate residencies also for non-primary PMCs
- intel/ISST:
- Store and restore data for all domains
- Write interface improvements
- lenovo-wmi:
- Support multiple Capability Data
- Add HWMON reporting and tuning support
- mellanox/mlx-platform: Add HI173 & HI174 support
- surface/aggregator_registry: Add Surface Pro 11 (QCOM)
- thinkpad_acpi: Add support for HW damage detection capability
- uniwill: Implement cTGP setting
- wmi:
- Introduce marshalling support
- Convert a few drivers to use the new buffer-based WMI API
- tools/power/x86/intel-speed-select: Allow read operations for non-root
- Miscellaneous cleanups / refactoring / improvements"
* tag 'platform-drivers-x86-v7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (68 commits)
platform/x86: lenovo-wmi-{capdata,other}: Fix HWMON channel visibility
platform/x86: hp-wmi: Add EC offsets to read Victus S thermal profile
platform: mellanox: mlx-platform: Add support DGX flavor of next-generation 800GB/s ethernet switch.
platform: mellanox: mlx-platform: Add support for new Nvidia DGX system based on class VMOD0010
HID: asus: add support for the asus-wmi brightness handler
platform/x86: asus-wmi: add keyboard brightness event handler
platform/x86: asus-wmi: remove unused keyboard backlight quirk
HID: asus: listen to the asus-wmi brightness device instead of creating one
platform/x86: asus-wmi: Add support for multiple kbd led handlers
HID: asus: early return for ROG devices
HID: asus: move vendor initialization to probe
HID: asus: fortify keyboard handshake
HID: asus: use same report_id in response
HID: asus: initialize additional endpoints only for certain devices
HID: asus: simplify RGB init sequence
platform/wmi: string-kunit: Add missing oversized string test case
platform/x86/amd/pmf: Added a module parameter to disable the Smart PC function
platform/x86/uniwill: Implement cTGP setting
platform/x86: uniwill-laptop: Introduce device descriptor system
platform/x86/amd: Use scope-based cleanup for wbrf_record()
...
Commit c27cea4416 ("rcu: Re-implement RCU Tasks Trace in terms of SRCU-fast")
broke map_kptr selftest since it removed the function we were kprobing.
Use a new kfunc that invokes call_rcu_tasks_trace and sets a program
provided pointer to an integer to 1. Technically this can be unsafe if
the memory being written to from the callback disappears, but this is
just for usage in a test where we ensure we spin until we see the value
to be set to 1, so it's ok.
Reported-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Fixes: c27cea4416 ("rcu: Re-implement RCU Tasks Trace in terms of SRCU-fast")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260211185747.3630539-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
