mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2025-12-28 07:54:36 -05:00
4e87ff59cebb53d3ce1333245e64ab7d51ebf118
13229 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
da96801729 |
Merge tag 'regulator-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"The main updates for this release are around monitoring of regulators,
largely for error handling purposes. We allow the stream of regulator
events to be seen by userspace as netlink events and allow system
integrators to describe individual regulators as system critical with
information on how long the system is expected to last on error. The
system level error handling is very much about best effort problem
mitigation rather than providing something fully robust, the initial
drive was to provide a mechanism for trying to avoid initiating any
new writes to flash once we notice the power going out.
Otherwise it's very quiet, mainly several new Qualcomm devices.
- Support for marking regulators as system critical and providing
information on how long the system might last with those regulators
in a failure state, hooked into the existing critical shutdown
error handling.
- Optional support for generating netlink events for events, there
are use cases for system monitoring UIs and error handling.
- A command line option to leave unused controllable regulators
enabled, useful for debugging. We already only disable regulators
we were explicitly given permission to control.
- Support for Quacomm MP5496, PM8010 and PM8937"
* tag 'regulator-v6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (31 commits)
regulator: event: Ensure atomicity for sequence number
uapi: regulator: Fix typo
regulator: Reuse LINEAR_RANGE() in REGULATOR_LINEAR_RANGE()
dt-bindings: regulator: qcom,usb-vbus-regulator: clean up example
regulator: qcom_smd: Add LDO5 MP5496 regulator
regulator: qcom-rpmh: add support for pm8010 regulators
regulator: dt-bindings: qcom,rpmh: add compatible for pm8010
regulator: qcom-rpmh: extend to support multiple linear voltage ranges
regulator: wm8350: Convert to platform remove callback returning void
regulator: virtual: Convert to platform remove callback returning void
regulator: userspace-consumer: Convert to platform remove callback returning void
regulator: uniphier: Convert to platform remove callback returning void
regulator: stm32-vrefbuf: Convert to platform remove callback returning void
regulator: db8500-prcmu: Convert to platform remove callback returning void
regulator: bd9571mwv: Convert to platform remove callback returning void
regulator: arizona-ldo1: Convert to platform remove callback returning void
regulator: event: Add regulator netlink event support
regulator: event: Add regulator netlink event support
regulator: stpmic1: Fix kernel-doc notation warnings
regulator: palmas: remove redundant initialization of pointer pdata
...
|
||
|
Linus Torvalds
|
063a7ce32d |
Merge tag 'lsm-pr-20240105' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull security module updates from Paul Moore: - Add three new syscalls: lsm_list_modules(), lsm_get_self_attr(), and lsm_set_self_attr(). The first syscall simply lists the LSMs enabled, while the second and third get and set the current process' LSM attributes. Yes, these syscalls may provide similar functionality to what can be found under /proc or /sys, but they were designed to support multiple, simultaneaous (stacked) LSMs from the start as opposed to the current /proc based solutions which were created at a time when only one LSM was allowed to be active at a given time. We have spent considerable time discussing ways to extend the existing /proc interfaces to support multiple, simultaneaous LSMs and even our best ideas have been far too ugly to support as a kernel API; after +20 years in the kernel, I felt the LSM layer had established itself enough to justify a handful of syscalls. Support amongst the individual LSM developers has been nearly unanimous, with a single objection coming from Tetsuo (TOMOYO) as he is worried that the LSM_ID_XXX token concept will make it more difficult for out-of-tree LSMs to survive. Several members of the LSM community have demonstrated the ability for out-of-tree LSMs to continue to exist by picking high/unused LSM_ID values as well as pointing out that many kernel APIs rely on integer identifiers, e.g. syscalls (!), but unfortunately Tetsuo's objections remain. My personal opinion is that while I have no interest in penalizing out-of-tree LSMs, I'm not going to penalize in-tree development to support out-of-tree development, and I view this as a necessary step forward to support the push for expanded LSM stacking and reduce our reliance on /proc and /sys which has occassionally been problematic for some container users. Finally, we have included the linux-api folks on (all?) recent revisions of the patchset and addressed all of their concerns. - Add a new security_file_ioctl_compat() LSM hook to handle the 32-bit ioctls on 64-bit systems problem. This patch includes support for all of the existing LSMs which provide ioctl hooks, although it turns out only SELinux actually cares about the individual ioctls. It is worth noting that while Casey (Smack) and Tetsuo (TOMOYO) did not give explicit ACKs to this patch, they did both indicate they are okay with the changes. - Fix a potential memory leak in the CALIPSO code when IPv6 is disabled at boot. While it's good that we are fixing this, I doubt this is something users are seeing in the wild as you need to both disable IPv6 and then attempt to configure IPv6 labeled networking via NetLabel/CALIPSO; that just doesn't make much sense. Normally this would go through netdev, but Jakub asked me to take this patch and of all the trees I maintain, the LSM tree seemed like the best fit. - Update the LSM MAINTAINERS entry with additional information about our process docs, patchwork, bug reporting, etc. I also noticed that the Lockdown LSM is missing a dedicated MAINTAINERS entry so I've added that to the pull request. I've been working with one of the major Lockdown authors/contributors to see if they are willing to step up and assume a Lockdown maintainer role; hopefully that will happen soon, but in the meantime I'll continue to look after it. - Add a handful of mailmap entries for Serge Hallyn and myself. * tag 'lsm-pr-20240105' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: (27 commits) lsm: new security_file_ioctl_compat() hook lsm: Add a __counted_by() annotation to lsm_ctx.ctx calipso: fix memory leak in netlbl_calipso_add_pass() selftests: remove the LSM_ID_IMA check in lsm/lsm_list_modules_test MAINTAINERS: add an entry for the lockdown LSM MAINTAINERS: update the LSM entry mailmap: add entries for Serge Hallyn's dead accounts mailmap: update/replace my old email addresses lsm: mark the lsm_id variables are marked as static lsm: convert security_setselfattr() to use memdup_user() lsm: align based on pointer length in lsm_fill_user_ctx() lsm: consolidate buffer size handling into lsm_fill_user_ctx() lsm: correct error codes in security_getselfattr() lsm: cleanup the size counters in security_getselfattr() lsm: don't yet account for IMA in LSM_CONFIG_COUNT calculation lsm: drop LSM_ID_IMA LSM: selftests for Linux Security Module syscalls SELinux: Add selfattr hooks AppArmor: Add selfattr hooks Smack: implement setselfattr and getselfattr hooks ... |
||
|
Linus Torvalds
|
9f2a635235 |
Merge tag 'mm-nonmm-stable-2024-01-09-10-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"Quite a lot of kexec work this time around. Many singleton patches in
many places. The notable patch series are:
- nilfs2 folio conversion from Matthew Wilcox in 'nilfs2: Folio
conversions for file paths'.
- Additional nilfs2 folio conversion from Ryusuke Konishi in 'nilfs2:
Folio conversions for directory paths'.
- IA64 remnant removal in Heiko Carstens's 'Remove unused code after
IA-64 removal'.
- Arnd Bergmann has enabled the -Wmissing-prototypes warning
everywhere in 'Treewide: enable -Wmissing-prototypes'. This had
some followup fixes:
- Nathan Chancellor has cleaned up the hexagon build in the series
'hexagon: Fix up instances of -Wmissing-prototypes'.
- Nathan also addressed some s390 warnings in 's390: A couple of
fixes for -Wmissing-prototypes'.
- Arnd Bergmann addresses the same warnings for MIPS in his series
'mips: address -Wmissing-prototypes warnings'.
- Baoquan He has made kexec_file operate in a top-down-fitting manner
similar to kexec_load in the series 'kexec_file: Load kernel at top
of system RAM if required'
- Baoquan He has also added the self-explanatory 'kexec_file: print
out debugging message if required'.
- Some checkstack maintenance work from Tiezhu Yang in the series
'Modify some code about checkstack'.
- Douglas Anderson has disentangled the watchdog code's logging when
multiple reports are occurring simultaneously. The series is
'watchdog: Better handling of concurrent lockups'.
- Yuntao Wang has contributed some maintenance work on the crash code
in 'crash: Some cleanups and fixes'"
* tag 'mm-nonmm-stable-2024-01-09-10-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (157 commits)
crash_core: fix and simplify the logic of crash_exclude_mem_range()
x86/crash: use SZ_1M macro instead of hardcoded value
x86/crash: remove the unused image parameter from prepare_elf_headers()
kdump: remove redundant DEFAULT_CRASH_KERNEL_LOW_SIZE
scripts/decode_stacktrace.sh: strip unexpected CR from lines
watchdog: if panicking and we dumped everything, don't re-enable dumping
watchdog/hardlockup: use printk_cpu_sync_get_irqsave() to serialize reporting
watchdog/softlockup: use printk_cpu_sync_get_irqsave() to serialize reporting
watchdog/hardlockup: adopt softlockup logic avoiding double-dumps
kexec_core: fix the assignment to kimage->control_page
x86/kexec: fix incorrect end address passed to kernel_ident_mapping_init()
lib/trace_readwrite.c:: replace asm-generic/io with linux/io
nilfs2: cpfile: fix some kernel-doc warnings
stacktrace: fix kernel-doc typo
scripts/checkstack.pl: fix no space expression between sp and offset
x86/kexec: fix incorrect argument passed to kexec_dprintk()
x86/kexec: use pr_err() instead of kexec_dprintk() when an error occurs
nilfs2: add missing set_freezable() for freezable kthread
kernel: relay: remove relay_file_splice_read dead code, doesn't work
docs: submit-checklist: remove all of "make namespacecheck"
...
|
||
|
Linus Torvalds
|
fb46e22a9e |
Merge tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Peng Zhang has done some mapletree maintainance work in the series
'maple_tree: add mt_free_one() and mt_attr() helpers'
'Some cleanups of maple tree'
- In the series 'mm: use memmap_on_memory semantics for dax/kmem'
Vishal Verma has altered the interworking between memory-hotplug
and dax/kmem so that newly added 'device memory' can more easily
have its memmap placed within that newly added memory.
- Matthew Wilcox continues folio-related work (including a few fixes)
in the patch series
'Add folio_zero_tail() and folio_fill_tail()'
'Make folio_start_writeback return void'
'Fix fault handler's handling of poisoned tail pages'
'Convert aops->error_remove_page to ->error_remove_folio'
'Finish two folio conversions'
'More swap folio conversions'
- Kefeng Wang has also contributed folio-related work in the series
'mm: cleanup and use more folio in page fault'
- Jim Cromie has improved the kmemleak reporting output in the series
'tweak kmemleak report format'.
- In the series 'stackdepot: allow evicting stack traces' Andrey
Konovalov to permits clients (in this case KASAN) to cause eviction
of no longer needed stack traces.
- Charan Teja Kalla has fixed some accounting issues in the page
allocator's atomic reserve calculations in the series 'mm:
page_alloc: fixes for high atomic reserve caluculations'.
- Dmitry Rokosov has added to the samples/ dorectory some sample code
for a userspace memcg event listener application. See the series
'samples: introduce cgroup events listeners'.
- Some mapletree maintanance work from Liam Howlett in the series
'maple_tree: iterator state changes'.
- Nhat Pham has improved zswap's approach to writeback in the series
'workload-specific and memory pressure-driven zswap writeback'.
- DAMON/DAMOS feature and maintenance work from SeongJae Park in the
series
'mm/damon: let users feed and tame/auto-tune DAMOS'
'selftests/damon: add Python-written DAMON functionality tests'
'mm/damon: misc updates for 6.8'
- Yosry Ahmed has improved memcg's stats flushing in the series 'mm:
memcg: subtree stats flushing and thresholds'.
- In the series 'Multi-size THP for anonymous memory' Ryan Roberts
has added a runtime opt-in feature to transparent hugepages which
improves performance by allocating larger chunks of memory during
anonymous page faults.
- Matthew Wilcox has also contributed some cleanup and maintenance
work against eh buffer_head code int he series 'More buffer_head
cleanups'.
- Suren Baghdasaryan has done work on Andrea Arcangeli's series
'userfaultfd move option'. UFFDIO_MOVE permits userspace heap
compaction algorithms to move userspace's pages around rather than
UFFDIO_COPY'a alloc/copy/free.
- Stefan Roesch has developed a 'KSM Advisor', in the series 'mm/ksm:
Add ksm advisor'. This is a governor which tunes KSM's scanning
aggressiveness in response to userspace's current needs.
- Chengming Zhou has optimized zswap's temporary working memory use
in the series 'mm/zswap: dstmem reuse optimizations and cleanups'.
- Matthew Wilcox has performed some maintenance work on the writeback
code, both code and within filesystems. The series is 'Clean up the
writeback paths'.
- Andrey Konovalov has optimized KASAN's handling of alloc and free
stack traces for secondary-level allocators, in the series 'kasan:
save mempool stack traces'.
- Andrey also performed some KASAN maintenance work in the series
'kasan: assorted clean-ups'.
- David Hildenbrand has gone to town on the rmap code. Cleanups, more
pte batching, folio conversions and more. See the series 'mm/rmap:
interface overhaul'.
- Kinsey Ho has contributed some maintenance work on the MGLRU code
in the series 'mm/mglru: Kconfig cleanup'.
- Matthew Wilcox has contributed lruvec page accounting code cleanups
in the series 'Remove some lruvec page accounting functions'"
* tag 'mm-stable-2024-01-08-15-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (361 commits)
mm, treewide: rename MAX_ORDER to MAX_PAGE_ORDER
mm, treewide: introduce NR_PAGE_ORDERS
selftests/mm: add separate UFFDIO_MOVE test for PMD splitting
selftests/mm: skip test if application doesn't has root privileges
selftests/mm: conform test to TAP format output
selftests: mm: hugepage-mmap: conform to TAP format output
selftests/mm: gup_test: conform test to TAP format output
mm/selftests: hugepage-mremap: conform test to TAP format output
mm/vmstat: move pgdemote_* out of CONFIG_NUMA_BALANCING
mm: zsmalloc: return -ENOSPC rather than -EINVAL in zs_malloc while size is too large
mm/memcontrol: remove __mod_lruvec_page_state()
mm/khugepaged: use a folio more in collapse_file()
slub: use a folio in __kmalloc_large_node
slub: use folio APIs in free_large_kmalloc()
slub: use alloc_pages_node() in alloc_slab_page()
mm: remove inc/dec lruvec page state functions
mm: ratelimit stat flush from workingset shrinker
kasan: stop leaking stack trace handles
mm/mglru: remove CONFIG_TRANSPARENT_HUGEPAGE
mm/mglru: add dummy pmd_dirty()
...
|
||
|
Linus Torvalds
|
aac4de465a |
Merge tag 'perf-core-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance events updates from Ingo Molnar: - Add branch stack counters ABI extension to better capture the growing amount of information the PMU exposes via branch stack sampling. There's matching tooling support. - Fix race when creating the nr_addr_filters sysfs file - Add Intel Sierra Forest and Grand Ridge intel/cstate PMU support - Add Intel Granite Rapids, Sierra Forest and Grand Ridge uncore PMU support - Misc cleanups & fixes * tag 'perf-core-2024-01-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel/uncore: Factor out topology_gidnid_map() perf/x86/intel/uncore: Fix NULL pointer dereference issue in upi_fill_topology() perf/x86/amd: Reject branch stack for IBS events perf/x86/intel/uncore: Support Sierra Forest and Grand Ridge perf/x86/intel/uncore: Support IIO free-running counters on GNR perf/x86/intel/uncore: Support Granite Rapids perf/x86/uncore: Use u64 to replace unsigned for the uncore offsets array perf/x86/intel/uncore: Generic uncore_get_uncores and MMIO format of SPR perf: Fix the nr_addr_filters fix perf/x86/intel/cstate: Add Grand Ridge support perf/x86/intel/cstate: Add Sierra Forest support x86/smp: Export symbol cpu_clustergroup_mask() perf/x86/intel/cstate: Cleanup duplicate attr_groups perf/core: Fix narrow startup race when creating the perf nr_addr_filters sysfs file perf/x86/intel: Support branch counters logging perf/x86/intel: Reorganize attrs and is_visible perf: Add branch_sample_call_stack perf/x86: Add PERF_X86_EVENT_NEEDS_BRANCH_STACK flag perf: Add branch stack counters |
||
|
Linus Torvalds
|
8c9440fea7 |
Merge tag 'vfs-6.8.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount updates from Christian Brauner:
"This contains the work to retrieve detailed information about mounts
via two new system calls. This is hopefully the beginning of the end
of the saga that started with fsinfo() years ago.
The LWN articles in [1] and [2] can serve as a summary so we can avoid
rehashing everything here.
At LSFMM in May 2022 we got into a room and agreed on what we want to
do about fsinfo(). Basically, split it into pieces. This is the first
part of that agreement. Specifically, it is concerned with retrieving
information about mounts. So this only concerns the mount information
retrieval, not the mount table change notification, or the extended
filesystem specific mount option work. That is separate work.
Currently mounts have a 32bit id. Mount ids are already in heavy use
by libmount and other low-level userspace but they can't be relied
upon because they're recycled very quickly. We agreed that mounts
should carry a unique 64bit id by which they can be referenced
directly. This is now implemented as part of this work.
The new 64bit mount id is exposed in statx() through the new
STATX_MNT_ID_UNIQUE flag. If the flag isn't raised the old mount id is
returned. If it is raised and the kernel supports the new 64bit mount
id the flag is raised in the result mask and the new 64bit mount id is
returned. New and old mount ids do not overlap so they cannot be
conflated.
Two new system calls are introduced that operate on the 64bit mount
id: statmount() and listmount(). A summary of the api and usage can be
found on LWN as well (cf. [3]) but of course, I'll provide a summary
here as well.
Both system calls rely on struct mnt_id_req. Which is the request
struct used to pass the 64bit mount id identifying the mount to
operate on. It is extensible to allow for the addition of new
parameters and for future use in other apis that make use of mount
ids.
statmount() mimicks the semantics of statx() and exposes a set flags
that userspace may raise in mnt_id_req to request specific information
to be retrieved. A statmount() call returns a struct statmount filled
in with information about the requested mount. Supported requests are
indicated by raising the request flag passed in struct mnt_id_req in
the @mask argument in struct statmount.
Currently we do support:
- STATMOUNT_SB_BASIC:
Basic filesystem info
- STATMOUNT_MNT_BASIC
Mount information (mount id, parent mount id, mount attributes etc)
- STATMOUNT_PROPAGATE_FROM
Propagation from what mount in current namespace
- STATMOUNT_MNT_ROOT
Path of the root of the mount (e.g., mount --bind /bla /mnt returns /bla)
- STATMOUNT_MNT_POINT
Path of the mount point (e.g., mount --bind /bla /mnt returns /mnt)
- STATMOUNT_FS_TYPE
Name of the filesystem type as the magic number isn't enough due to submounts
The string options STATMOUNT_MNT_{ROOT,POINT} and STATMOUNT_FS_TYPE
are appended to the end of the struct. Userspace can use the offsets
in @fs_type, @mnt_root, and @mnt_point to reference those strings
easily.
The struct statmount reserves quite a bit of space currently for
future extensibility. This isn't really a problem and if this bothers
us we can just send a follow-up pull request during this cycle.
listmount() is given a 64bit mount id via mnt_id_req just as
statmount(). It takes a buffer and a size to return an array of the
64bit ids of the child mounts of the requested mount. Userspace can
thus choose to either retrieve child mounts for a mount in batches or
iterate through the child mounts. For most use-cases it will be
sufficient to just leave space for a few child mounts. But for big
mount tables having an iterator is really helpful. Iterating through a
mount table works by setting @param in mnt_id_req to the mount id of
the last child mount retrieved in the previous listmount() call"
Link: https://lwn.net/Articles/934469 [1]
Link: https://lwn.net/Articles/829212 [2]
Link: https://lwn.net/Articles/950569 [3]
* tag 'vfs-6.8.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
add selftest for statmount/listmount
fs: keep struct mnt_id_req extensible
wire up syscalls for statmount/listmount
add listmount(2) syscall
statmount: simplify string option retrieval
statmount: simplify numeric option retrieval
add statmount(2) syscall
namespace: extract show_path() helper
mounts: keep list of mounts in an rbtree
add unique mount ID
|
||
|
Naresh Solanki
|
51088e5cc2 |
uapi: regulator: Fix typo
Fix minor typo. Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com> Link: https://msgid.link/r/20240104101315.521301-1-naresh.solanki@9elements.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Andrea Arcangeli
|
adef440691 |
userfaultfd: UFFDIO_MOVE uABI
Implement the uABI of UFFDIO_MOVE ioctl. UFFDIO_COPY performs ~20% better than UFFDIO_MOVE when the application needs pages to be allocated [1]. However, with UFFDIO_MOVE, if pages are available (in userspace) for recycling, as is usually the case in heap compaction algorithms, then we can avoid the page allocation and memcpy (done by UFFDIO_COPY). Also, since the pages are recycled in the userspace, we avoid the need to release (via madvise) the pages back to the kernel [2]. We see over 40% reduction (on a Google pixel 6 device) in the compacting thread's completion time by using UFFDIO_MOVE vs. UFFDIO_COPY. This was measured using a benchmark that emulates a heap compaction implementation using userfaultfd (to allow concurrent accesses by application threads). More details of the usecase are explained in [2]. Furthermore, UFFDIO_MOVE enables moving swapped-out pages without touching them within the same vma. Today, it can only be done by mremap, however it forces splitting the vma. [1] https://lore.kernel.org/all/1425575884-2574-1-git-send-email-aarcange@redhat.com/ [2] https://lore.kernel.org/linux-mm/CA+EESO4uO84SSnBhArH4HvLNhaUQ5nZKNKXqxRCyjniNVjp0Aw@mail.gmail.com/ Update for the ioctl_userfaultfd(2) manpage: UFFDIO_MOVE (Since Linux xxx) Move a continuous memory chunk into the userfault registered range and optionally wake up the blocked thread. The source and destination addresses and the number of bytes to move are specified by the src, dst, and len fields of the uffdio_move structure pointed to by argp: struct uffdio_move { __u64 dst; /* Destination of move */ __u64 src; /* Source of move */ __u64 len; /* Number of bytes to move */ __u64 mode; /* Flags controlling behavior of move */ __s64 move; /* Number of bytes moved, or negated error */ }; The following value may be bitwise ORed in mode to change the behavior of the UFFDIO_MOVE operation: UFFDIO_MOVE_MODE_DONTWAKE Do not wake up the thread that waits for page-fault resolution UFFDIO_MOVE_MODE_ALLOW_SRC_HOLES Allow holes in the source virtual range that is being moved. When not specified, the holes will result in ENOENT error. When specified, the holes will be accounted as successfully moved memory. This is mostly useful to move hugepage aligned virtual regions without knowing if there are transparent hugepages in the regions or not, but preventing the risk of having to split the hugepage during the operation. The move field is used by the kernel to return the number of bytes that was actually moved, or an error (a negated errno- style value). If the value returned in move doesn't match the value that was specified in len, the operation fails with the error EAGAIN. The move field is output-only; it is not read by the UFFDIO_MOVE operation. The operation may fail for various reasons. Usually, remapping of pages that are not exclusive to the given process fail; once KSM might deduplicate pages or fork() COW-shares pages during fork() with child processes, they are no longer exclusive. Further, the kernel might only perform lightweight checks for detecting whether the pages are exclusive, and return -EBUSY in case that check fails. To make the operation more likely to succeed, KSM should be disabled, fork() should be avoided or MADV_DONTFORK should be configured for the source VMA before fork(). This ioctl(2) operation returns 0 on success. In this case, the entire area was moved. On error, -1 is returned and errno is set to indicate the error. Possible errors include: EAGAIN The number of bytes moved (i.e., the value returned in the move field) does not equal the value that was specified in the len field. EINVAL Either dst or len was not a multiple of the system page size, or the range specified by src and len or dst and len was invalid. EINVAL An invalid bit was specified in the mode field. ENOENT The source virtual memory range has unmapped holes and UFFDIO_MOVE_MODE_ALLOW_SRC_HOLES is not set. EEXIST The destination virtual memory range is fully or partially mapped. EBUSY The pages in the source virtual memory range are either pinned or not exclusive to the process. The kernel might only perform lightweight checks for detecting whether the pages are exclusive. To make the operation more likely to succeed, KSM should be disabled, fork() should be avoided or MADV_DONTFORK should be configured for the source virtual memory area before fork(). ENOMEM Allocating memory needed for the operation failed. ESRCH The target process has exited at the time of a UFFDIO_MOVE operation. Link: https://lkml.kernel.org/r/20231206103702.3873743-3-surenb@google.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Brian Geffon <bgeffon@google.com> Cc: Christian Brauner <brauner@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jann Horn <jannh@google.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport (IBM) <rppt@kernel.org> Cc: Nicolas Geoffray <ngeoffray@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Shuah Khan <shuah@kernel.org> Cc: ZhangPeng <zhangpeng362@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Mark Brown
|
ea67677dbb |
lsm: Add a __counted_by() annotation to lsm_ctx.ctx
The ctx in struct lsm_ctx is an array of size ctx_len, tell the compiler about this using __counted_by() where supported to improve the ability to detect overflow issues. Reported-by: Aishwarya TCV <aishwarya.tcv@arm.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Paul Moore <paul@paul-moore.com> |
||
|
Baoquan He
|
cbc2fe9d9c |
kexec_file: add kexec_file flag to control debug printing
Patch series "kexec_file: print out debugging message if required", v4. Currently, specifying '-d' on kexec command will print a lot of debugging informationabout kexec/kdump loading with kexec_load interface. However, kexec_file_load prints nothing even though '-d' is specified. It's very inconvenient to debug or analyze the kexec/kdump loading when something wrong happened with kexec/kdump itself or develper want to check the kexec/kdump loading. In this patchset, a kexec_file flag is KEXEC_FILE_DEBUG added and checked in code. If it's passed in, debugging message of kexec_file code will be printed out and can be seen from console and dmesg. Otherwise, the debugging message is printed like beofre when pr_debug() is taken. Note: **** ===== 1) The code in kexec-tools utility also need be changed to support passing KEXEC_FILE_DEBUG to kernel when 'kexec -s -d' is specified. The patch link is here: ========= [PATCH] kexec_file: add kexec_file flag to support debug printing http://lists.infradead.org/pipermail/kexec/2023-November/028505.html 2) s390 also has kexec_file code, while I am not sure what debugging information is necessary. So leave it to s390 developer. Test: **** ==== Testing was done in v1 on x86_64 and arm64. For v4, tested on x86_64 again. And on x86_64, the printed messages look like below: -------------------------------------------------------------- kexec measurement buffer for the loaded kernel at 0x207fffe000. Loaded purgatory at 0x207fff9000 Loaded boot_param, command line and misc at 0x207fff3000 bufsz=0x1180 memsz=0x1180 Loaded 64bit kernel at 0x207c000000 bufsz=0xc88200 memsz=0x3c4a000 Loaded initrd at 0x2079e79000 bufsz=0x2186280 memsz=0x2186280 Final command line is: root=/dev/mapper/fedora_intel--knightslanding--lb--02-root ro rd.lvm.lv=fedora_intel-knightslanding-lb-02/root console=ttyS0,115200N81 crashkernel=256M E820 memmap: 0000000000000000-000000000009a3ff (1) 000000000009a400-000000000009ffff (2) 00000000000e0000-00000000000fffff (2) 0000000000100000-000000006ff83fff (1) 000000006ff84000-000000007ac50fff (2) ...... 000000207fff6150-000000207fff615f (128) 000000207fff6160-000000207fff714f (1) 000000207fff7150-000000207fff715f (128) 000000207fff7160-000000207fff814f (1) 000000207fff8150-000000207fff815f (128) 000000207fff8160-000000207fffffff (1) nr_segments = 5 segment[0]: buf=0x000000004e5ece74 bufsz=0x211 mem=0x207fffe000 memsz=0x1000 segment[1]: buf=0x000000009e871498 bufsz=0x4000 mem=0x207fff9000 memsz=0x5000 segment[2]: buf=0x00000000d879f1fe bufsz=0x1180 mem=0x207fff3000 memsz=0x2000 segment[3]: buf=0x000000001101cd86 bufsz=0xc88200 mem=0x207c000000 memsz=0x3c4a000 segment[4]: buf=0x00000000c6e38ac7 bufsz=0x2186280 mem=0x2079e79000 memsz=0x2187000 kexec_file_load: type:0, start:0x207fff91a0 head:0x109e004002 flags:0x8 --------------------------------------------------------------------------- This patch (of 7): When specifying 'kexec -c -d', kexec_load interface will print loading information, e.g the regions where kernel/initrd/purgatory/cmdline are put, the memmap passed to 2nd kernel taken as system RAM ranges, and printing all contents of struct kexec_segment, etc. These are very helpful for analyzing or positioning what's happening when kexec/kdump itself failed. The debugging printing for kexec_load interface is made in user space utility kexec-tools. Whereas, with kexec_file_load interface, 'kexec -s -d' print nothing. Because kexec_file code is mostly implemented in kernel space, and the debugging printing functionality is missed. It's not convenient when debugging kexec/kdump loading and jumping with kexec_file_load interface. Now add KEXEC_FILE_DEBUG to kexec_file flag to control the debugging message printing. And add global variable kexec_file_dbg_print and macro kexec_dprintk() to facilitate the printing. This is a preparation, later kexec_dprintk() will be used to replace the existing pr_debug(). Once 'kexec -s -d' is specified, it will print out kexec/kdump loading information. If '-d' is not specified, it regresses to pr_debug(). Link: https://lkml.kernel.org/r/20231213055747.61826-1-bhe@redhat.com Link: https://lkml.kernel.org/r/20231213055747.61826-2-bhe@redhat.com Signed-off-by: Baoquan He <bhe@redhat.com> Cc: Conor Dooley <conor@kernel.org> Cc: Joe Perches <joe@perches.com> Cc: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Christian Brauner
|
35e27a5744 |
fs: keep struct mnt_id_req extensible
Make it extensible so that we have the liberty to reuse it in future mount-id based apis. Treat zero size as the first published struct. Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Miklos Szeredi
|
d8b0f54650 |
wire up syscalls for statmount/listmount
Wire up all archs. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Link: https://lore.kernel.org/r/20231025140205.3586473-7-mszeredi@redhat.com Reviewed-by: Ian Kent <raven@themaw.net> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Miklos Szeredi
|
b4c2bea8ce |
add listmount(2) syscall
Add way to query the children of a particular mount. This is a more flexible way to iterate the mount tree than having to parse /proc/self/mountinfo. Lookup the mount by the new 64bit mount ID. If a mount needs to be queried based on path, then statx(2) can be used to first query the mount ID belonging to the path. Return an array of new (64bit) mount ID's. Without privileges only mounts are listed which are reachable from the task's root. Folded into this patch are several later improvements. Keeping them separate would make the history pointlessly confusing: * Recursive listing of mounts is the default now (cf. [1]). * Remove explicit LISTMOUNT_UNREACHABLE flag (cf. [1]) and fail if mount is unreachable from current root. This also makes permission checking consistent with statmount() (cf. [3]). * Start listing mounts in unique mount ID order (cf. [2]) to allow continuing listmount() from a midpoint. * Allow to continue listmount(). The @request_mask parameter is renamed and to @param to be usable by both statmount() and listmount(). If @param is set to a mount id then listmount() will continue listing mounts from that id on. This allows listing mounts in multiple listmount invocations without having to resize the buffer. If @param is zero then the listing starts from the beginning (cf. [4]). * Don't return EOVERFLOW, instead return the buffer size which allows to detect a full buffer as well (cf. [4]). Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Link: https://lore.kernel.org/r/20231025140205.3586473-6-mszeredi@redhat.com Reviewed-by: Ian Kent <raven@themaw.net> Link: https://lore.kernel.org/r/20231128160337.29094-2-mszeredi@redhat.com [1] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-3-mszeredi@redhat.com [2] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-4-mszeredi@redhat.com [3] (folded) Link: https://lore.kernel.org/r/20231128160337.29094-5-mszeredi@redhat.com [4] (folded) [Christian Brauner <brauner@kernel.org>: various smaller fixes] Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Miklos Szeredi
|
46eae99ef7 |
add statmount(2) syscall
Add a way to query attributes of a single mount instead of having to parse the complete /proc/$PID/mountinfo, which might be huge. Lookup the mount the new 64bit mount ID. If a mount needs to be queried based on path, then statx(2) can be used to first query the mount ID belonging to the path. Design is based on a suggestion by Linus: "So I'd suggest something that is very much like "statfsat()", which gets a buffer and a length, and returns an extended "struct statfs" *AND* just a string description at the end." The interface closely mimics that of statx. Handle ASCII attributes by appending after the end of the structure (as per above suggestion). Pointers to strings are stored in u64 members to make the structure the same regardless of pointer size. Strings are nul terminated. Link: https://lore.kernel.org/all/CAHk-=wh5YifP7hzKSbwJj94+DZ2czjrZsczy6GBimiogZws=rg@mail.gmail.com/ Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Link: https://lore.kernel.org/r/20231025140205.3586473-5-mszeredi@redhat.com Reviewed-by: Ian Kent <raven@themaw.net> [Christian Brauner <brauner@kernel.org>: various minor changes] Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Andrei Vagin
|
e6a9a2cbc1 |
fs/proc/task_mmu: report SOFT_DIRTY bits through the PAGEMAP_SCAN ioctl
The PAGEMAP_SCAN ioctl returns information regarding page table entries. It is more efficient compared to reading pagemap files. CRIU can start to utilize this ioctl, but it needs info about soft-dirty bits to track memory changes. We are aware of a new method for tracking memory changes implemented in the PAGEMAP_SCAN ioctl. For CRIU, the primary advantage of this method is its usability by unprivileged users. However, it is not feasible to transparently replace the soft-dirty tracker with the new one. The main problem here is userfault descriptors that have to be preserved between pre-dump iterations. It means criu continues supporting the soft-dirty method to avoid breakage for current users. The new method will be implemented as a separate feature. [avagin@google.com: update tools/include/uapi/linux/fs.h] Link: https://lkml.kernel.org/r/20231107164139.576046-1-avagin@google.com Link: https://lkml.kernel.org/r/20231106220959.296568-1-avagin@google.com Signed-off-by: Andrei Vagin <avagin@google.com> Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Naresh Solanki
|
16e5ac127d |
regulator: event: Add regulator netlink event support
This commit introduces netlink event support to the regulator subsystem. Changes: - Introduce event.c and regnl.h for netlink event handling. - Implement reg_generate_netlink_event to broadcast regulator events. - Update Makefile to include the new event.c file. Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com> Link: https://lore.kernel.org/r/20231205105207.1262928-1-naresh.solanki@9elements.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Tyler Fanelli
|
c55e0a55b1 |
fuse: Rename DIRECT_IO_RELAX to DIRECT_IO_ALLOW_MMAP
Although DIRECT_IO_RELAX's initial usage is to allow shared mmap, its
description indicates a purpose of reducing memory footprint. This
may imply that it could be further used to relax other DIRECT_IO
operations in the future.
Replace it with a flag DIRECT_IO_ALLOW_MMAP which does only one thing,
allow shared mmap of DIRECT_IO files while still bypassing the cache
on regular reads and writes.
[Miklos] Also Keep DIRECT_IO_RELAX definition for backward compatibility.
Signed-off-by: Tyler Fanelli <tfanelli@redhat.com>
Fixes:
|
||
|
Linus Torvalds
|
994d5c58e5 |
Merge tag 'hardening-v6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook: - struct_group: propagate attributes to top-level union (Dmitry Antipov) - gcc-plugins: randstruct: Update code comment in relayout_struct (Gustavo A. R. Silva) - MAINTAINERS: refresh LLVM support (Nick Desaulniers) * tag 'hardening-v6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: gcc-plugins: randstruct: Update code comment in relayout_struct() uapi: propagate __struct_group() attributes to the container union MAINTAINERS: refresh LLVM support |
||
|
Linus Torvalds
|
d095b18f3e |
Merge tag 'media/v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab. * tag 'media/v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: pci: mgb4: add COMMON_CLK dependency media: v4l2-subdev: Fix a 64bit bug media: mgb4: Added support for T200 card variant media: vsp1: Remove unbalanced .s_stream(0) calls |
||
|
Dmitry Antipov
|
4e86f32a13 |
uapi: propagate __struct_group() attributes to the container union
Recently the kernel test robot has reported an ARM-specific BUILD_BUG_ON()
in an old and unmaintained wil6210 wireless driver. The problem comes from
the structure packing rules of old ARM ABI ('-mabi=apcs-gnu'). For example,
the following structure is packed to 18 bytes instead of 16:
struct poorly_packed {
unsigned int a;
unsigned int b;
unsigned short c;
union {
struct {
unsigned short d;
unsigned int e;
} __attribute__((packed));
struct {
unsigned short d;
unsigned int e;
} __attribute__((packed)) inner;
};
} __attribute__((packed));
To fit it into 16 bytes, it's required to add packed attribute to the
container union as well:
struct poorly_packed {
unsigned int a;
unsigned int b;
unsigned short c;
union {
struct {
unsigned short d;
unsigned int e;
} __attribute__((packed));
struct {
unsigned short d;
unsigned int e;
} __attribute__((packed)) inner;
} __attribute__((packed));
} __attribute__((packed));
Thanks to Andrew Pinski of GCC team for sorting the things out at
https://gcc.gnu.org/pipermail/gcc/2023-November/242888.html.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311150821.cI4yciFE-lkp@intel.com
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://lore.kernel.org/r/20231120110607.98956-1-dmantipov@yandex.ru
Fixes:
|
||
|
Linus Torvalds
|
fa2b906f51 |
Merge tag 'vfs-6.7-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Avoid calling back into LSMs from vfs_getattr_nosec() calls.
IMA used to query inode properties accessing raw inode fields without
dedicated helpers. That was finally fixed a few releases ago by
forcing IMA to use vfs_getattr_nosec() helpers.
The goal of the vfs_getattr_nosec() helper is to query for attributes
without calling into the LSM layer which would be quite problematic
because incredibly IMA is called from __fput()...
__fput()
-> ima_file_free()
What it does is to call back into the filesystem to update the file's
IMA xattr. Querying the inode without using vfs_getattr_nosec() meant
that IMA didn't handle stacking filesystems such as overlayfs
correctly. So the switch to vfs_getattr_nosec() is quite correct. But
the switch to vfs_getattr_nosec() revealed another bug when used on
stacking filesystems:
__fput()
-> ima_file_free()
-> vfs_getattr_nosec()
-> i_op->getattr::ovl_getattr()
-> vfs_getattr()
-> i_op->getattr::$WHATEVER_UNDERLYING_FS_getattr()
-> security_inode_getattr() # calls back into LSMs
Now, if that __fput() happens from task_work_run() of an exiting task
current->fs and various other pointer could already be NULL. So
anything in the LSM layer relying on that not being NULL would be
quite surprised.
Fix that by passing the information that this is a security request
through to the stacking filesystem by adding a new internal
ATT_GETATTR_NOSEC flag. Now the callchain becomes:
__fput()
-> ima_file_free()
-> vfs_getattr_nosec()
-> i_op->getattr::ovl_getattr()
-> if (AT_GETATTR_NOSEC)
vfs_getattr_nosec()
else
vfs_getattr()
-> i_op->getattr::$WHATEVER_UNDERLYING_FS_getattr()
- Fix a bug introduced with the iov_iter rework from last cycle.
This broke /proc/kcore by copying too much and without the correct
offset.
- Add a missing NULL check when allocating the root inode in
autofs_fill_super().
- Fix stable writes for multi-device filesystems (xfs, btrfs etc) and
the block device pseudo filesystem.
Stable writes used to be a superblock flag only, making it a per
filesystem property. Add an additional AS_STABLE_WRITES mapping flag
to allow for fine-grained control.
- Ensure that offset_iterate_dir() returns 0 after reaching the end of
a directory so it adheres to getdents() convention.
* tag 'vfs-6.7-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
libfs: getdents() should return 0 after reaching EOD
xfs: respect the stable writes flag on the RT device
xfs: clean up FS_XFLAG_REALTIME handling in xfs_ioctl_setattr_xflags
block: update the stable_writes flag in bdev_add
filemap: add a per-mapping stable writes flag
autofs: add: new_inode check in autofs_fill_super()
iov_iter: fix copy_page_to_iter_nofault()
fs: Pass AT_GETATTR_NOSEC flag to getattr interface function
|
||
|
Miklos Szeredi
|
98d2b43081 |
add unique mount ID
If a mount is released then its mnt_id can immediately be reused. This is bad news for user interfaces that want to uniquely identify a mount. Implementing a unique mount ID is trivial (use a 64bit counter). Unfortunately userspace assumes 32bit size and would overflow after the counter reaches 2^32. Introduce a new 64bit ID alongside the old one. Initialize the counter to 2^32, this guarantees that the old and new IDs are never mixed up. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Link: https://lore.kernel.org/r/20231025140205.3586473-2-mszeredi@redhat.com Reviewed-by: Ian Kent <raven@themaw.net> Signed-off-by: Christian Brauner <brauner@kernel.org> |
||
|
Stefan Berger
|
8a924db2d7 |
fs: Pass AT_GETATTR_NOSEC flag to getattr interface function
When vfs_getattr_nosec() calls a filesystem's getattr interface function
then the 'nosec' should propagate into this function so that
vfs_getattr_nosec() can again be called from the filesystem's gettattr
rather than vfs_getattr(). The latter would add unnecessary security
checks that the initial vfs_getattr_nosec() call wanted to avoid.
Therefore, introduce the getattr flag GETATTR_NOSEC and allow to pass
with the new getattr_flags parameter to the getattr interface function.
In overlayfs and ecryptfs use this flag to determine which one of the
two functions to call.
In a recent code change introduced to IMA vfs_getattr_nosec() ended up
calling vfs_getattr() in overlayfs, which in turn called
security_inode_getattr() on an exiting process that did not have
current->fs set anymore, which then caused a kernel NULL pointer
dereference. With this change the call to security_inode_getattr() can
be avoided, thus avoiding the NULL pointer dereference.
Reported-by: <syzbot+a67fc5321ffb4b311c98@syzkaller.appspotmail.com>
Fixes:
|
||
|
Dan Carpenter
|
5d33213fac |
media: v4l2-subdev: Fix a 64bit bug
The problem is this line here from subdev_do_ioctl().
client_cap->capabilities &= ~V4L2_SUBDEV_CLIENT_CAP_STREAMS;
The "client_cap->capabilities" variable is a u64. The AND operation
is supposed to clear out the V4L2_SUBDEV_CLIENT_CAP_STREAMS flag. But
because it's a 32 bit variable it accidentally clears out the high 32
bits as well.
Currently we only use the first bit and none of the upper bits so this
doesn't affect runtime behavior.
Fixes:
|
||
|
Linus Torvalds
|
372bed5fbb |
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin: "Bugfixes all over the place" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost-vdpa: fix use after free in vhost_vdpa_probe() virtio_pci: Switch away from deprecated irq_set_affinity_hint riscv, qemu_fw_cfg: Add support for RISC-V architecture vdpa_sim_blk: allocate the buffer zeroed virtio_pci: move structure to a header |
||
|
Peter Zijlstra
|
5d2d4a9f60 |
Merge branch 'tip/perf/urgent'
Avoid conflicts, base on fixes. Signed-off-by: Peter Zijlstra <peterz@infradead.org> |
||
|
Linus Torvalds
|
9bacdd8996 |
Merge tag 'for-6.7-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix potential overflow in returned value from SEARCH_TREE_V2
ioctl on 32bit architecture
- zoned mode fixes:
- drop unnecessary write pointer check for RAID0/RAID1/RAID10
profiles, now it works because of raid-stripe-tree
- wait for finishing the zone when direct IO needs a new
allocation
- simple quota fixes:
- pass correct owning root pointer when cleaning up an
aborted transaction
- fix leaking some structures when processing delayed refs
- change key type number of BTRFS_EXTENT_OWNER_REF_KEY,
reorder it before inline refs that are supposed to be
sorted, keeping the original number would complicate a lot
of things; this change needs an updated version of
btrfs-progs to work and filesystems need to be recreated
- fix error pointer dereference after failure to allocate fs
devices
- fix race between accounting qgroup extents and removing a
qgroup
* tag 'for-6.7-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: make OWNER_REF_KEY type value smallest among inline refs
btrfs: fix qgroup record leaks when using simple quotas
btrfs: fix race between accounting qgroup extents and removing a qgroup
btrfs: fix error pointer dereference after failure to allocate fs devices
btrfs: make found_logical_ret parameter mandatory for function queue_scrub_stripe()
btrfs: get correct owning_root when dropping snapshot
btrfs: zoned: wait for data BG to be finished on direct IO allocation
btrfs: zoned: drop no longer valid write pointer check
btrfs: directly return 0 on no error code in btrfs_insert_raid_extent()
btrfs: use u64 for buffer sizes in the tree search ioctls
|
||
|
Paul Moore
|
edd71f8e26 |
lsm: drop LSM_ID_IMA
When IMA becomes a proper LSM we will reintroduce an appropriate LSM ID, but drop it from the userspace API for now in an effort to put an end to debates around the naming of the LSM ID macro. Reviewed-by: Roberto Sassu <roberto.sassu@huawei.com> Signed-off-by: Paul Moore <paul@paul-moore.com> |
||
|
Casey Schaufler
|
5f42375904 |
LSM: wireup Linux Security Module syscalls
Wireup lsm_get_self_attr, lsm_set_self_attr and lsm_list_modules system calls. Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: linux-api@vger.kernel.org Reviewed-by: Mickaël Salaün <mic@digikod.net> [PM: forward ported beyond v6.6 due merge window changes] Signed-off-by: Paul Moore <paul@paul-moore.com> |
||
|
Casey Schaufler
|
a04a119808 |
LSM: syscalls for current process attributes
Create a system call lsm_get_self_attr() to provide the security
module maintained attributes of the current process.
Create a system call lsm_set_self_attr() to set a security
module maintained attribute of the current process.
Historically these attributes have been exposed to user space via
entries in procfs under /proc/self/attr.
The attribute value is provided in a lsm_ctx structure. The structure
identifies the size of the attribute, and the attribute value. The format
of the attribute value is defined by the security module. A flags field
is included for LSM specific information. It is currently unused and must
be 0. The total size of the data, including the lsm_ctx structure and any
padding, is maintained as well.
struct lsm_ctx {
__u64 id;
__u64 flags;
__u64 len;
__u64 ctx_len;
__u8 ctx[];
};
Two new LSM hooks are used to interface with the LSMs.
security_getselfattr() collects the lsm_ctx values from the
LSMs that support the hook, accounting for space requirements.
security_setselfattr() identifies which LSM the attribute is
intended for and passes it along.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
||
|
Casey Schaufler
|
f3b8788cde |
LSM: Identify modules by more than name
Create a struct lsm_id to contain identifying information about Linux Security Modules (LSMs). At inception this contains the name of the module and an identifier associated with the security module. Change the security_add_hooks() interface to use this structure. Change the individual modules to maintain their own struct lsm_id and pass it to security_add_hooks(). The values are for LSM identifiers are defined in a new UAPI header file linux/lsm.h. Each existing LSM has been updated to include it's LSMID in the lsm_id. The LSM ID values are sequential, with the oldest module LSM_ID_CAPABILITY being the lowest value and the existing modules numbered in the order they were included in the main line kernel. This is an arbitrary convention for assigning the values, but none better presents itself. The value 0 is defined as being invalid. The values 1-99 are reserved for any special case uses which may arise in the future. This may include attributes of the LSM infrastructure itself, possibly related to namespacing or network attribute management. A special range is identified for such attributes to help reduce confusion for developers unfamiliar with LSMs. LSM attribute values are defined for the attributes presented by modules that are available today. As with the LSM IDs, The value 0 is defined as being invalid. The values 1-99 are reserved for any special case uses which may arise in the future. Cc: linux-security-module <linux-security-module@vger.kernel.org> Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Serge Hallyn <serge@hallyn.com> Reviewed-by: Mickael Salaun <mic@digikod.net> Reviewed-by: John Johansen <john.johansen@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org> Nacked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> [PM: forward ported beyond v6.6 due merge window changes] Signed-off-by: Paul Moore <paul@paul-moore.com> |
||
|
Linus Torvalds
|
89cdf9d556 |
Merge tag 'net-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter and bpf.
Current release - regressions:
- sched: fix SKB_NOT_DROPPED_YET splat under debug config
Current release - new code bugs:
- tcp:
- fix usec timestamps with TCP fastopen
- fix possible out-of-bounds reads in tcp_hash_fail()
- fix SYN option room calculation for TCP-AO
- tcp_sigpool: fix some off by one bugs
- bpf: fix compilation error without CGROUPS
- ptp:
- ptp_read() should not release queue
- fix tsevqs corruption
Previous releases - regressions:
- llc: verify mac len before reading mac header
Previous releases - always broken:
- bpf:
- fix check_stack_write_fixed_off() to correctly spill imm
- fix precision tracking for BPF_ALU | BPF_TO_BE | BPF_END
- check map->usercnt after timer->timer is assigned
- dsa: lan9303: consequently nested-lock physical MDIO
- dccp/tcp: call security_inet_conn_request() after setting IP addr
- tg3: fix the TX ring stall due to incorrect full ring handling
- phylink: initialize carrier state at creation
- ice: fix direction of VF rules in switchdev mode
Misc:
- fill in a bunch of missing MODULE_DESCRIPTION()s, more to come"
* tag 'net-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits)
net: ti: icss-iep: fix setting counter value
ptp: fix corrupted list in ptp_open
ptp: ptp_read should not release queue
net_sched: sch_fq: better validate TCA_FQ_WEIGHTS and TCA_FQ_PRIOMAP
net: kcm: fill in MODULE_DESCRIPTION()
net/sched: act_ct: Always fill offloading tuple iifidx
netfilter: nat: fix ipv6 nat redirect with mapped and scoped addresses
netfilter: xt_recent: fix (increase) ipv6 literal buffer length
ipvs: add missing module descriptions
netfilter: nf_tables: remove catchall element in GC sync path
netfilter: add missing module descriptions
drivers/net/ppp: use standard array-copy-function
net: enetc: shorten enetc_setup_xdp_prog() error message to fit NETLINK_MAX_FMTMSG_LEN
virtio/vsock: Fix uninit-value in virtio_transport_recv_pkt()
r8169: respect userspace disabling IFF_MULTICAST
selftests/bpf: get trusted cgrp from bpf_iter__cgroup directly
bpf: Let verifier consider {task,cgroup} is trusted in bpf_iter_reg
net: phylink: initialize carrier state at creation
test/vsock: add dobule bind connect test
test/vsock: refactor vsock_accept
...
|
||
|
Boris Burkov
|
d393315244 |
btrfs: make OWNER_REF_KEY type value smallest among inline refs
BTRFS_EXTENT_OWNER_REF_KEY is the type of simple quotas extent owner
refs. This special inline ref goes in front of all other inline refs.
In general, inline refs have a required sorted order s.t. type never
decreases (among other requirements). This was recently reified into a
tree-checker and fsck rule, which broke simple quotas. To be fair,
though, in a sense, the new owner ref item had also violated that not
yet fully enforced requirement.
This fix brings the owner ref item into compliance with the requirement
that inline ref type never decrease.
btrfs/301 exercises this behavior and should pass again with this fix.
Fixes:
|
||
|
Linus Torvalds
|
25b6377007 |
Merge tag 'drm-next-2023-11-07' of git://anongit.freedesktop.org/drm/drm
Pull more drm updates from Dave Airlie: "Geert pointed out I missed the renesas reworks in my main pull, so this pull contains the renesas next work for atomic conversion and DT support. It also contains a bunch of amdgpu and some small ssd13xx fixes. renesas: - atomic conversion - DT support ssd13xx: - dt binding fix for ssd132x - Initialize ssd130x crtc_state to NULL. amdgpu: - Fix RAS support check - RAS fixes - MES fixes - SMU13 fixes - Contiguous memory allocation fix - BACO fixes - GPU reset fixes - Min power limit fixes - GFX11 fixes - USB4/TB hotplug fixes - ARM regression fix - GFX9.4.3 fixes - KASAN/KCSAN stack size check fixes - SR-IOV fixes - SMU14 fixes - PSP13 fixes - Display blend fixes - Flexible array size fixes amdkfd: - GPUVM fix radeon: - Flexible array size fixes" * tag 'drm-next-2023-11-07' of git://anongit.freedesktop.org/drm/drm: (83 commits) drm/amd/display: Enable fast update on blendTF change drm/amd/display: Fix blend LUT programming drm/amd/display: Program plane color setting correctly drm/amdgpu: Query and report boot status drm/amdgpu: Add psp v13 function to query boot status drm/amd/swsmu: remove fw version check in sw_init. drm/amd/swsmu: update smu v14_0_0 driver if and metrics table drm/amdgpu: Add C2PMSG_109/126 reg field shift/masks drm/amdgpu: Optimize the asic type fix code drm/amdgpu: fix GRBM read timeout when do mes_self_test drm/amdgpu: check recovery status of xgmi hive in ras_reset_error_count drm/amd/pm: only check sriov vf flag once when creating hwmon sysfs drm/amdgpu: Attach eviction fence on alloc drm/amdkfd: Improve amdgpu_vm_handle_moved drm/amd/display: Increase frame warning limit with KASAN or KCSAN in dml2 drm/amd/display: Avoid NULL dereference of timing generator drm/amdkfd: Update cache info for GFX 9.4.3 drm/amdkfd: Populate cache info for GFX 9.4.3 drm/amdgpu: don't put MQDs in VRAM on ARM | ARM64 drm/amdgpu/smu13: drop compute workload workaround ... |
||
|
Linus Torvalds
|
be3ca57cfb |
Merge tag 'media/v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab: - the old V4L2 core videobuf kAPI was finally removed. All media drivers should now be using VB2 kAPI - new automotive driver: mgb4 - new platform video driver: npcm-video - new sensor driver: mt9m114 - new TI driver used in conjunction with Cadence CSI2RX IP to bridge TI-specific parts - ir-rx51 was removed and the N900 DT binding was moved to the pwm-ir-tx generic driver - drop atomisp-specific ov5693, using the upstream driver instead - the camss driver has gained RDI3 support for VFE 17x - the atomisp driver now detects ISP2400 or ISP2401 at run time. No need to set it up at build time anymore - lots of driver fixes, cleanups and improvements * tag 'media/v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (377 commits) media: nuvoton: VIDEO_NPCM_VCD_ECE should depend on ARCH_NPCM media: venus: Fix firmware path for resources media: venus: hfi_cmds: Replace one-element array with flex-array member and use __counted_by media: venus: hfi_parser: Add check to keep the number of codecs within range media: venus: hfi: add checks to handle capabilities from firmware media: venus: hfi: fix the check to handle session buffer requirement media: venus: hfi: add checks to perform sanity on queue pointers media: platform: cadence: select MIPI_DPHY dependency media: MAINTAINERS: Fix path for J721E CSI2RX bindings media: cec: meson: always include meson sub-directory in Makefile media: videobuf2: Fix IS_ERR checking in vb2_dc_put_userptr() media: platform: mtk-mdp3: fix uninitialized variable in mdp_path_config() media: mediatek: vcodec: using encoder device to alloc/free encoder memory media: imx-jpeg: notify source chagne event when the first picture parsed media: cx231xx: Use EP5_BUF_SIZE macro media: siano: Drop unnecessary error check for debugfs_create_dir/file() media: mediatek: vcodec: Handle invalid encoder vsi media: aspeed: Drop unnecessary error check for debugfs_create_file() Documentation: media: buffer.rst: fix V4L2_BUF_FLAG_PREPARED Documentation: media: gen-errors.rst: fix confusing ENOTTY description ... |
||
|
Jakub Kicinski
|
d93f952857 |
nfsd: regenerate user space parsers after ynl-gen changes
Commit
|
||
|
Linus Torvalds
|
77fa2fbe87 |
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin: "vhost,virtio,vdpa: features, fixes, cleanups. vdpa/mlx5: - VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK - new maintainer vdpa: - support for vq descriptor mappings - decouple reset of iotlb mapping from device reset and fixes, cleanups all over the place" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (34 commits) vdpa_sim: implement .reset_map support vdpa/mlx5: implement .reset_map driver op vhost-vdpa: clean iotlb map during reset for older userspace vdpa: introduce .compat_reset operation callback vhost-vdpa: introduce IOTLB_PERSIST backend feature bit vhost-vdpa: reset vendor specific mapping to initial state in .release vdpa: introduce .reset_map operation callback virtio_pci: add check for common cfg size virtio-blk: fix implicit overflow on virtio_max_dma_size virtio_pci: add build offset check for the new common cfg items virtio: add definition of VIRTIO_F_NOTIF_CONFIG_DATA feature bit vduse: make vduse_class constant vhost-scsi: Spelling s/preceeding/preceding/g virtio: kdoc for struct virtio_pci_modern_device vdpa: Update sysfs ABI documentation MAINTAINERS: Add myself as mlx5_vdpa driver virtio-balloon: correct the comment of virtballoon_migratepage() mlx5_vdpa: offer VHOST_BACKEND_F_ENABLE_AFTER_DRIVER_OK vdpa/mlx5: Update cvq iotlb mapping on ASID change vdpa/mlx5: Make iotlb helper functions more generic ... |
||
|
Linus Torvalds
|
2153fc3d68 |
Merge tag 'ubifs-for-linus-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull UBI and UBIFS updates from Richard Weinberger: - UBI Fastmap improvements - Minor issues found by static analysis bots in both UBI and UBIFS - Fix for wrong dentry length UBIFS in fscrypt mode * tag 'ubifs-for-linus-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: ubifs: ubifs_link: Fix wrong name len calculating when UBIFS is encrypted ubi: block: Fix use-after-free in ubiblock_cleanup ubifs: fix possible dereference after free ubi: fastmap: Add control in 'UBI_IOCATT' ioctl to reserve PEBs for filling pools ubi: fastmap: Add module parameter to control reserving filling pool PEBs ubi: fastmap: Fix lapsed wear leveling for first 64 PEBs ubi: fastmap: Get wl PEB even ec beyonds the 'max' if free PEBs are run out ubi: fastmap: may_reserve_for_fm: Don't reserve PEB if fm_anchor exists ubi: fastmap: Remove unneeded break condition while filling pools ubi: fastmap: Wait until there are enough free PEBs before filling pools ubi: fastmap: Use free pebs reserved for bad block handling ubi: Replace erase_block() with sync_erase() ubi: fastmap: Allocate memory with GFP_NOFS in ubi_update_fastmap ubi: fastmap: erase_block: Get erase counter from wl_entry rather than flash ubi: fastmap: Fix missed ec updating after erasing old fastmap data block ubifs: Fix missing error code err ubifs: Fix memory leak of bud->log_hash ubifs: Fix some kernel-doc comments |
||
|
Linus Torvalds
|
5e2cb28dd7 |
Merge tag 'tsm-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/linux
Pull unified attestation reporting from Dan Williams:
"In an ideal world there would be a cross-vendor standard attestation
report format for confidential guests along with a common device
definition to act as the transport.
In the real world the situation ended up with multiple platform
vendors inventing their own attestation report formats with the
SEV-SNP implementation being a first mover to define a custom
sev-guest character device and corresponding ioctl(). Later, this
configfs-tsm proposal intercepted an attempt to add a tdx-guest
character device and a corresponding new ioctl(). It also anticipated
ARM and RISC-V showing up with more chardevs and more ioctls().
The proposal takes for granted that Linux tolerates the vendor report
format differentiation until a standard arrives. From talking with
folks involved, it sounds like that standardization work is unlikely
to resolve anytime soon. It also takes the position that kernfs ABIs
are easier to maintain than ioctl(). The result is a shared configfs
mechanism to return per-vendor report-blobs with the option to later
support a standard when that arrives.
Part of the goal here also is to get the community into the
"uncomfortable, but beneficial to the long term maintainability of the
kernel" state of talking to each other about their differentiation and
opportunities to collaborate. Think of this like the device-driver
equivalent of the common memory-management infrastructure for
confidential-computing being built up in KVM.
As for establishing an "upstream path for cross-vendor
confidential-computing device driver infrastructure" this is something
I want to discuss at Plumbers. At present, the multiple vendor
proposals for assigning devices to confidential computing VMs likely
needs a new dedicated repository and maintainer team, but that is a
discussion for v6.8.
For now, Greg and Thomas have acked this approach and this is passing
is AMD, Intel, and Google tests.
Summary:
- Introduce configfs-tsm as a shared ABI for confidential computing
attestation reports
- Convert sev-guest to additionally support configfs-tsm alongside
its vendor specific ioctl()
- Added signed attestation report retrieval to the tdx-guest driver
forgoing a new vendor specific ioctl()
- Misc cleanups and a new __free() annotation for kvfree()"
* tag 'tsm-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/linux:
virt: tdx-guest: Add Quote generation support using TSM_REPORTS
virt: sevguest: Add TSM_REPORTS support for SNP_GET_EXT_REPORT
mm/slab: Add __free() support for kvfree
virt: sevguest: Prep for kernel internal get_ext_report()
configfs-tsm: Introduce a shared ABI for attestation reports
virt: coco: Add a coco/Makefile and coco/Kconfig
virt: sevguest: Fix passing a stack buffer as a scatterlist target
|
||
|
Linus Torvalds
|
d934aef6bb |
Merge tag 'dmaengine-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul: - Big pile of __counted_by attribute annotations to several structures for bounds checking of flexible arrays at run-time - Another big pile platform remove callback returning void changes - Device tree device_get_match_data() usage and dropping of_match_device() calls - Minor driver updates to pxa, idxd fsl, hisi etc drivers * tag 'dmaengine-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (106 commits) dmaengine: stm32-mdma: correct desc prep when channel running dmaengine: dw-axi-dmac: Add support DMAX_NUM_CHANNELS > 16 dmaengine: xilinx: xilinx_dma: Fix kernel doc about xilinx_dma_remove() dmaengine: mmp_tdma: drop unused variable 'of_id' MAINTAINERS: Add entries for NXP(Freescale) eDMA drivers dmaengine: xilinx: xdma: Support cyclic transfers dmaengine: xilinx: xdma: Prepare the introduction of cyclic transfers dmaengine: Drop unnecessary of_match_device() calls dmaengine: Use device_get_match_data() dmaengine: pxa_dma: Annotate struct pxad_desc_sw with __counted_by dmaengine: pxa_dma: Remove an erroneous BUG_ON() in pxad_free_desc() dmaengine: xilinx: xdma: Use resource_size() in xdma_probe() dmaengine: fsl-dpaa2-qdma: Remove redundant initialization owner in dpaa2_qdma_driver dmaengine: Remove unused declaration dma_chan_cleanup() dmaengine: mmp: fix Wvoid-pointer-to-enum-cast warning dmaengine: qcom: fix Wvoid-pointer-to-enum-cast warning dmaengine: fsl-edma: Remove redundant dev_err() for platform_get_irq() dmaengine: ep93xx_dma: Annotate struct ep93xx_dma_engine with __counted_by dmaengine: idxd: add wq driver name support for accel-config user tool dmaengine: fsl-edma: Annotate struct struct fsl_edma_engine with __counted_by ... |
||
|
Linus Torvalds
|
2c40c1c6ad |
Merge tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt updates from Greg KH:
"Here is the "big" set of USB and Thunderbolt changes for 6.7-rc1.
Nothing really major in here, just lots of constant development for
new hardware. Included in here are:
- Thunderbolt (i.e. USB4) fixes for reported issues and support for
new hardware types and devices
- USB typec additions of new drivers and cleanups for some existing
ones
- xhci cleanups and expanded tracing support and some platform
specific updates
- USB "La Jolla Cove Adapter (LJCA)" support added, and the gpio,
spi, and i2c drivers for that type of device (all acked by the
respective subsystem maintainers.)
- lots of USB gadget driver updates and cleanups
- new USB dwc3 platforms supported, as well as other dwc3 fixes and
cleanups
- USB chipidea driver updates
- other smaller driver cleanups and additions, full details in the
shortlog
All of these have been in the linux-next tree for a while with no
reported problems"
* tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits)
usb: gadget: uvc: Add missing initialization of ssp config descriptor
usb: storage: set 1.50 as the lower bcdDevice for older "Super Top" compatibility
usb: raw-gadget: report suspend, resume, reset, and disconnect events
usb: raw-gadget: don't disable device if usb_ep_queue fails
usb: raw-gadget: properly handle interrupted requests
usb:cdnsp: remove TRB_FLUSH_ENDPOINT command
usb: gadget: aspeed_udc: Convert to platform remove callback returning void
dt-bindings: usb: fsa4480: Add compatible for OCP96011
usb: typec: fsa4480: Add support to swap SBU orientation
dt-bindings: usb: fsa4480: Add data-lanes property to endpoint
usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm()
Revert "dt-bindings: usb: Add bindings for multiport properties on DWC3 controller"
Revert "dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport"
thunderbolt: Fix one kernel-doc comment
usb: gadget: f_ncm: Always set current gadget in ncm_bind()
usb: core: Remove duplicated check in usb_hub_create_port_device
usb: typec: tcpm: Add additional checks for contaminant
arm64: dts: rockchip: rk3588s: Add USB3 host controller
usb: dwc3: add optional PHY interface clocks
dt-bindings: usb: add rk3588 compatible to rockchip,dwc3
...
|
||
|
Linus Torvalds
|
1f24458a10 |
Merge tag 'tty-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty and serial updates from Greg KH:
"Here is the big set of tty/serial driver changes for 6.7-rc1. Included
in here are:
- console/vgacon cleanups and removals from Arnd
- tty core and n_tty cleanups from Jiri
- lots of 8250 driver updates and cleanups
- sc16is7xx serial driver updates
- dt binding updates
- first set of port lock wrapers from Thomas for the printk fixes
coming in future releases
- other small serial and tty core cleanups and updates
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (193 commits)
serdev: Replace custom code with device_match_acpi_handle()
serdev: Simplify devm_serdev_device_open() function
serdev: Make use of device_set_node()
tty: n_gsm: add copyright Siemens Mobility GmbH
tty: n_gsm: fix race condition in status line change on dead connections
serial: core: Fix runtime PM handling for pending tx
vgacon: fix mips/sibyte build regression
dt-bindings: serial: drop unsupported samsung bindings
tty: serial: samsung: drop earlycon support for unsupported platforms
tty: 8250: Add note for PX-835
tty: 8250: Fix IS-200 PCI ID comment
tty: 8250: Add Brainboxes Oxford Semiconductor-based quirks
tty: 8250: Add support for Intashield IX cards
tty: 8250: Add support for additional Brainboxes PX cards
tty: 8250: Fix up PX-803/PX-857
tty: 8250: Fix port count of PX-257
tty: 8250: Add support for Intashield IS-100
tty: 8250: Add support for Brainboxes UP cards
tty: 8250: Add support for additional Brainboxes UC cards
tty: 8250: Remove UC-257 and UC-431
...
|
||
|
Linus Torvalds
|
d99b91a99b |
Merge tag 'char-misc-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
changes for 6.7-rc1. Included in here are:
- IIO subsystem driver updates and additions (largest part of this
pull request)
- FPGA subsystem driver updates
- Counter subsystem driver updates
- ICC subsystem driver updates
- extcon subsystem driver updates
- mei driver updates and additions
- nvmem subsystem driver updates and additions
- comedi subsystem dependency fixes
- parport driver fixups
- cdx subsystem driver and core updates
- splice support for /dev/zero and /dev/full
- other smaller driver cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (326 commits)
cdx: add sysfs for subsystem, class and revision
cdx: add sysfs for bus reset
cdx: add support for bus enable and disable
cdx: Register cdx bus as a device on cdx subsystem
cdx: Create symbol namespaces for cdx subsystem
cdx: Introduce lock to protect controller ops
cdx: Remove cdx controller list from cdx bus system
dts: ti: k3-am625-beagleplay: Add beaglecc1352
greybus: Add BeaglePlay Linux Driver
dt-bindings: net: Add ti,cc1352p7
dt-bindings: eeprom: at24: allow NVMEM cells based on old syntax
dt-bindings: nvmem: SID: allow NVMEM cells based on old syntax
Revert "nvmem: add new config option"
MAINTAINERS: coresight: Add missing Coresight files
misc: pci_endpoint_test: Add deviceID for J721S2 PCIe EP device support
firmware: xilinx: Move EXPORT_SYMBOL_GPL next to zynqmp_pm_feature definition
uacce: make uacce_class constant
ocxl: make ocxl_class constant
cxl: make cxl_class constant
misc: phantom: make phantom_class constant
...
|
||
|
Linus Torvalds
|
136cc1e1f5 |
Merge tag 'landlock-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock updates from Mickaël Salaün: "A Landlock ruleset can now handle two new access rights: LANDLOCK_ACCESS_NET_BIND_TCP and LANDLOCK_ACCESS_NET_CONNECT_TCP. When handled, the related actions are denied unless explicitly allowed by a Landlock network rule for a specific port. The related patch series has been reviewed for almost two years, it has evolved a lot and we now have reached a decent design, code and testing. The refactored kernel code and the new test helpers also bring the foundation to support more network protocols. Test coverage for security/landlock is 92.4% of 710 lines according to gcc/gcov-13, and it was 93.1% of 597 lines before this series. The decrease in coverage is due to code refactoring to make the ruleset management more generic (i.e. dealing with inodes and ports) that also added new WARN_ON_ONCE() checks not possible to test from user space. syzkaller has been updated accordingly [4], and such patched instance (tailored to Landlock) has been running for a month, covering all the new network-related code [5]" Link: https://lore.kernel.org/r/20231026014751.414649-1-konstantin.meskhidze@huawei.com [1] Link: https://lore.kernel.org/r/CAHC9VhS1wwgH6NNd+cJz4MYogPiRV8NyPDd1yj5SpaxeUB4UVg@mail.gmail.com [2] Link: https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next-history.git/commit/?id=c8dc5ee69d3a [3] Link: https://github.com/google/syzkaller/pull/4266 [4] Link: https://storage.googleapis.com/syzbot-assets/82e8608dec36/ci-upstream-linux-next-kasan-gce-root-ab577164.html#security%2flandlock%2fnet.c [5] * tag 'landlock-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: selftests/landlock: Add tests for FS topology changes with network rules landlock: Document network support samples/landlock: Support TCP restrictions selftests/landlock: Add network tests selftests/landlock: Share enforce_ruleset() helper landlock: Support network rules with TCP bind and connect landlock: Refactor landlock_add_rule() syscall landlock: Refactor layer helpers landlock: Move and rename layer helpers landlock: Refactor merge/inherit_ruleset helpers landlock: Refactor landlock_find_rule/insert_rule helpers landlock: Allow FS topology changes for domains without such rule type landlock: Make ruleset's access masks more generic |
||
|
Linus Torvalds
|
31e5f934ff |
Merge tag 'trace-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt: - Remove eventfs_file descriptor This is the biggest change, and the second part of making eventfs create its files dynamically. In 6.6 the first part was added, and that maintained a one to one mapping between eventfs meta descriptors and the directories and file inodes and dentries that were dynamically created. The directories were represented by a eventfs_inode and the files were represented by a eventfs_file. In v6.7 the eventfs_file is removed. As all events have the same directory make up (sched_switch has an "enable", "id", "format", etc files), the handing of what files are underneath each leaf eventfs directory is moved back to the tracing subsystem via a callback. When an event is added to the eventfs, it registers an array of evenfs_entry's. These hold the names of the files and the callbacks to call when the file is referenced. The callback gets the name so that the same callback may be used by multiple files. The callback then supplies the filesystem_operations structure needed to create this file. This has brought the memory footprint of creating multiple eventfs instances down by 2 megs each! - User events now has persistent events that are not associated to a single processes. These are privileged events that hang around even if no process is attached to them - Clean up of seq_buf There's talk about using seq_buf more to replace strscpy() and friends. But this also requires some minor modifications of seq_buf to be able to do this - Expand instance ring buffers individually Currently if boot up creates an instance, and a trace event is enabled on that instance, the ring buffer for that instance and the top level ring buffer are expanded (1.4 MB per CPU). This wastes memory as this happens when nothing is using the top level instance - Other minor clean ups and fixes * tag 'trace-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (34 commits) seq_buf: Export seq_buf_puts() seq_buf: Export seq_buf_putc() eventfs: Use simple_recursive_removal() to clean up dentries eventfs: Remove special processing of dput() of events directory eventfs: Delete eventfs_inode when the last dentry is freed eventfs: Hold eventfs_mutex when calling callback functions eventfs: Save ownership and mode eventfs: Test for ei->is_freed when accessing ei->dentry eventfs: Have a free_ei() that just frees the eventfs_inode eventfs: Remove "is_freed" union with rcu head eventfs: Fix kerneldoc of eventfs_remove_rec() tracing: Have the user copy of synthetic event address use correct context eventfs: Remove extra dget() in eventfs_create_events_dir() tracing: Have trace_event_file have ref counters seq_buf: Introduce DECLARE_SEQ_BUF and seq_buf_str() eventfs: Fix typo in eventfs_inode union comment eventfs: Fix WARN_ON() in create_file_dentry() powerpc: Remove initialisation of readpos tracing/histograms: Simplify last_cmd_set() seq_buf: fix a misleading comment ... |
||
|
Linus Torvalds
|
ecae0bd517 |
Merge tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"Many singleton patches against the MM code. The patch series which are
included in this merge do the following:
- Kemeng Shi has contributed some compation maintenance work in the
series 'Fixes and cleanups to compaction'
- Joel Fernandes has a patchset ('Optimize mremap during mutual
alignment within PMD') which fixes an obscure issue with mremap()'s
pagetable handling during a subsequent exec(), based upon an
implementation which Linus suggested
- More DAMON/DAMOS maintenance and feature work from SeongJae Park i
the following patch series:
mm/damon: misc fixups for documents, comments and its tracepoint
mm/damon: add a tracepoint for damos apply target regions
mm/damon: provide pseudo-moving sum based access rate
mm/damon: implement DAMOS apply intervals
mm/damon/core-test: Fix memory leaks in core-test
mm/damon/sysfs-schemes: Do DAMOS tried regions update for only one apply interval
- In the series 'Do not try to access unaccepted memory' Adrian
Hunter provides some fixups for the recently-added 'unaccepted
memory' feature. To increase the feature's checking coverage. 'Plug
a few gaps where RAM is exposed without checking if it is
unaccepted memory'
- In the series 'cleanups for lockless slab shrink' Qi Zheng has done
some maintenance work which is preparation for the lockless slab
shrinking code
- Qi Zheng has redone the earlier (and reverted) attempt to make slab
shrinking lockless in the series 'use refcount+RCU method to
implement lockless slab shrink'
- David Hildenbrand contributes some maintenance work for the rmap
code in the series 'Anon rmap cleanups'
- Kefeng Wang does more folio conversions and some maintenance work
in the migration code. Series 'mm: migrate: more folio conversion
and unification'
- Matthew Wilcox has fixed an issue in the buffer_head code which was
causing long stalls under some heavy memory/IO loads. Some cleanups
were added on the way. Series 'Add and use bdev_getblk()'
- In the series 'Use nth_page() in place of direct struct page
manipulation' Zi Yan has fixed a potential issue with the direct
manipulation of hugetlb page frames
- In the series 'mm: hugetlb: Skip initialization of gigantic tail
struct pages if freed by HVO' has improved our handling of gigantic
pages in the hugetlb vmmemmep optimizaton code. This provides
significant boot time improvements when significant amounts of
gigantic pages are in use
- Matthew Wilcox has sent the series 'Small hugetlb cleanups' - code
rationalization and folio conversions in the hugetlb code
- Yin Fengwei has improved mlock()'s handling of large folios in the
series 'support large folio for mlock'
- In the series 'Expose swapcache stat for memcg v1' Liu Shixin has
added statistics for memcg v1 users which are available (and
useful) under memcg v2
- Florent Revest has enhanced the MDWE (Memory-Deny-Write-Executable)
prctl so that userspace may direct the kernel to not automatically
propagate the denial to child processes. The series is named 'MDWE
without inheritance'
- Kefeng Wang has provided the series 'mm: convert numa balancing
functions to use a folio' which does what it says
- In the series 'mm/ksm: add fork-exec support for prctl' Stefan
Roesch makes is possible for a process to propagate KSM treatment
across exec()
- Huang Ying has enhanced memory tiering's calculation of memory
distances. This is used to permit the dax/kmem driver to use 'high
bandwidth memory' in addition to Optane Data Center Persistent
Memory Modules (DCPMM). The series is named 'memory tiering:
calculate abstract distance based on ACPI HMAT'
- In the series 'Smart scanning mode for KSM' Stefan Roesch has
optimized KSM by teaching it to retain and use some historical
information from previous scans
- Yosry Ahmed has fixed some inconsistencies in memcg statistics in
the series 'mm: memcg: fix tracking of pending stats updates
values'
- In the series 'Implement IOCTL to get and optionally clear info
about PTEs' Peter Xu has added an ioctl to /proc/<pid>/pagemap
which permits us to atomically read-then-clear page softdirty
state. This is mainly used by CRIU
- Hugh Dickins contributed the series 'shmem,tmpfs: general
maintenance', a bunch of relatively minor maintenance tweaks to
this code
- Matthew Wilcox has increased the use of the VMA lock over
file-backed page faults in the series 'Handle more faults under the
VMA lock'. Some rationalizations of the fault path became possible
as a result
- In the series 'mm/rmap: convert page_move_anon_rmap() to
folio_move_anon_rmap()' David Hildenbrand has implemented some
cleanups and folio conversions
- In the series 'various improvements to the GUP interface' Lorenzo
Stoakes has simplified and improved the GUP interface with an eye
to providing groundwork for future improvements
- Andrey Konovalov has sent along the series 'kasan: assorted fixes
and improvements' which does those things
- Some page allocator maintenance work from Kemeng Shi in the series
'Two minor cleanups to break_down_buddy_pages'
- In thes series 'New selftest for mm' Breno Leitao has developed
another MM self test which tickles a race we had between madvise()
and page faults
- In the series 'Add folio_end_read' Matthew Wilcox provides cleanups
and an optimization to the core pagecache code
- Nhat Pham has added memcg accounting for hugetlb memory in the
series 'hugetlb memcg accounting'
- Cleanups and rationalizations to the pagemap code from Lorenzo
Stoakes, in the series 'Abstract vma_merge() and split_vma()'
- Audra Mitchell has fixed issues in the procfs page_owner code's new
timestamping feature which was causing some misbehaviours. In the
series 'Fix page_owner's use of free timestamps'
- Lorenzo Stoakes has fixed the handling of new mappings of sealed
files in the series 'permit write-sealed memfd read-only shared
mappings'
- Mike Kravetz has optimized the hugetlb vmemmap optimization in the
series 'Batch hugetlb vmemmap modification operations'
- Some buffer_head folio conversions and cleanups from Matthew Wilcox
in the series 'Finish the create_empty_buffers() transition'
- As a page allocator performance optimization Huang Ying has added
automatic tuning to the allocator's per-cpu-pages feature, in the
series 'mm: PCP high auto-tuning'
- Roman Gushchin has contributed the patchset 'mm: improve
performance of accounted kernel memory allocations' which improves
their performance by ~30% as measured by a micro-benchmark
- folio conversions from Kefeng Wang in the series 'mm: convert page
cpupid functions to folios'
- Some kmemleak fixups in Liu Shixin's series 'Some bugfix about
kmemleak'
- Qi Zheng has improved our handling of memoryless nodes by keeping
them off the allocation fallback list. This is done in the series
'handle memoryless nodes more appropriately'
- khugepaged conversions from Vishal Moola in the series 'Some
khugepaged folio conversions'"
[ bcachefs conflicts with the dynamically allocated shrinkers have been
resolved as per Stephen Rothwell in
https://lore.kernel.org/all/20230913093553.4290421e@canb.auug.org.au/
with help from Qi Zheng.
The clone3 test filtering conflict was half-arsed by yours truly ]
* tag 'mm-stable-2023-11-01-14-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (406 commits)
mm/damon/sysfs: update monitoring target regions for online input commit
mm/damon/sysfs: remove requested targets when online-commit inputs
selftests: add a sanity check for zswap
Documentation: maple_tree: fix word spelling error
mm/vmalloc: fix the unchecked dereference warning in vread_iter()
zswap: export compression failure stats
Documentation: ubsan: drop "the" from article title
mempolicy: migration attempt to match interleave nodes
mempolicy: mmap_lock is not needed while migrating folios
mempolicy: alloc_pages_mpol() for NUMA policy without vma
mm: add page_rmappable_folio() wrapper
mempolicy: remove confusing MPOL_MF_LAZY dead code
mempolicy: mpol_shared_policy_init() without pseudo-vma
mempolicy trivia: use pgoff_t in shared mempolicy tree
mempolicy trivia: slightly more consistent naming
mempolicy trivia: delete those ancient pr_debug()s
mempolicy: fix migrate_pages(2) syscall return nr_failed
kernfs: drop shared NUMA mempolicy hooks
hugetlbfs: drop shared NUMA mempolicy pretence
mm/damon/sysfs-test: add a unit test for damon_sysfs_set_targets()
...
|
||
|
Linus Torvalds
|
bc3012f4e3 |
Merge tag 'v6.7-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu: "API: - Add virtual-address based lskcipher interface - Optimise ahash/shash performance in light of costly indirect calls - Remove ahash alignmask attribute Algorithms: - Improve AES/XTS performance of 6-way unrolling for ppc - Remove some uses of obsolete algorithms (md4, md5, sha1) - Add FIPS 202 SHA-3 support in pkcs1pad - Add fast path for single-page messages in adiantum - Remove zlib-deflate Drivers: - Add support for S4 in meson RNG driver - Add STM32MP13x support in stm32 - Add hwrng interface support in qcom-rng - Add support for deflate algorithm in hisilicon/zip" * tag 'v6.7-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (283 commits) crypto: adiantum - flush destination page before unmapping crypto: testmgr - move pkcs1pad(rsa,sha3-*) to correct place Documentation/module-signing.txt: bring up to date module: enable automatic module signing with FIPS 202 SHA-3 crypto: asymmetric_keys - allow FIPS 202 SHA-3 signatures crypto: rsa-pkcs1pad - Add FIPS 202 SHA-3 support crypto: FIPS 202 SHA-3 register in hash info for IMA x509: Add OIDs for FIPS 202 SHA-3 hash and signatures crypto: ahash - optimize performance when wrapping shash crypto: ahash - check for shash type instead of not ahash type crypto: hash - move "ahash wrapping shash" functions to ahash.c crypto: talitos - stop using crypto_ahash::init crypto: chelsio - stop using crypto_ahash::init crypto: ahash - improve file comment crypto: ahash - remove struct ahash_request_priv crypto: ahash - remove crypto_ahash_alignmask crypto: gcm - stop using alignmask of ahash crypto: chacha20poly1305 - stop using alignmask of ahash crypto: ccm - stop using alignmask of ahash net: ipv6: stop checking crypto_ahash_alignmask ... |
||
|
Linus Torvalds
|
6803bd7956 |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Generalized infrastructure for 'writable' ID registers, effectively
allowing userspace to opt-out of certain vCPU features for its
guest
- Optimization for vSGI injection, opportunistically compressing
MPIDR to vCPU mapping into a table
- Improvements to KVM's PMU emulation, allowing userspace to select
the number of PMCs available to a VM
- Guest support for memory operation instructions (FEAT_MOPS)
- Cleanups to handling feature flags in KVM_ARM_VCPU_INIT, squashing
bugs and getting rid of useless code
- Changes to the way the SMCCC filter is constructed, avoiding wasted
memory allocations when not in use
- Load the stage-2 MMU context at vcpu_load() for VHE systems,
reducing the overhead of errata mitigations
- Miscellaneous kernel and selftest fixes
LoongArch:
- New architecture for kvm.
The hardware uses the same model as x86, s390 and RISC-V, where
guest/host mode is orthogonal to supervisor/user mode. The
virtualization extensions are very similar to MIPS, therefore the
code also has some similarities but it's been cleaned up to avoid
some of the historical bogosities that are found in arch/mips. The
kernel emulates MMU, timer and CSR accesses, while interrupt
controllers are only emulated in userspace, at least for now.
RISC-V:
- Support for the Smstateen and Zicond extensions
- Support for virtualizing senvcfg
- Support for virtualized SBI debug console (DBCN)
S390:
- Nested page table management can be monitored through tracepoints
and statistics
x86:
- Fix incorrect handling of VMX posted interrupt descriptor in
KVM_SET_LAPIC, which could result in a dropped timer IRQ
- Avoid WARN on systems with Intel IPI virtualization
- Add CONFIG_KVM_MAX_NR_VCPUS, to allow supporting up to 4096 vCPUs
without forcing more common use cases to eat the extra memory
overhead.
- Add virtualization support for AMD SRSO mitigation (IBPB_BRTYPE and
SBPB, aka Selective Branch Predictor Barrier).
- Fix a bug where restoring a vCPU snapshot that was taken within 1
second of creating the original vCPU would cause KVM to try to
synchronize the vCPU's TSC and thus clobber the correct TSC being
set by userspace.
- Compute guest wall clock using a single TSC read to avoid
generating an inaccurate time, e.g. if the vCPU is preempted
between multiple TSC reads.
- "Virtualize" HWCR.TscFreqSel to make Linux guests happy, which
complain about a "Firmware Bug" if the bit isn't set for select
F/M/S combos. Likewise "virtualize" (ignore) MSR_AMD64_TW_CFG to
appease Windows Server 2022.
- Don't apply side effects to Hyper-V's synthetic timer on writes
from userspace to fix an issue where the auto-enable behavior can
trigger spurious interrupts, i.e. do auto-enabling only for guest
writes.
- Remove an unnecessary kick of all vCPUs when synchronizing the
dirty log without PML enabled.
- Advertise "support" for non-serializing FS/GS base MSR writes as
appropriate.
- Harden the fast page fault path to guard against encountering an
invalid root when walking SPTEs.
- Omit "struct kvm_vcpu_xen" entirely when CONFIG_KVM_XEN=n.
- Use the fast path directly from the timer callback when delivering
Xen timer events, instead of waiting for the next iteration of the
run loop. This was not done so far because previously proposed code
had races, but now care is taken to stop the hrtimer at critical
points such as restarting the timer or saving the timer information
for userspace.
- Follow the lead of upstream Xen and ignore the VCPU_SSHOTTMR_future
flag.
- Optimize injection of PMU interrupts that are simultaneous with
NMIs.
- Usual handful of fixes for typos and other warts.
x86 - MTRR/PAT fixes and optimizations:
- Clean up code that deals with honoring guest MTRRs when the VM has
non-coherent DMA and host MTRRs are ignored, i.e. EPT is enabled.
- Zap EPT entries when non-coherent DMA assignment stops/start to
prevent using stale entries with the wrong memtype.
- Don't ignore guest PAT for CR0.CD=1 && KVM_X86_QUIRK_CD_NW_CLEARED=y
This was done as a workaround for virtual machine BIOSes that did
not bother to clear CR0.CD (because ancient KVM/QEMU did not bother
to set it, in turn), and there's zero reason to extend the quirk to
also ignore guest PAT.
x86 - SEV fixes:
- Report KVM_EXIT_SHUTDOWN instead of EINVAL if KVM intercepts
SHUTDOWN while running an SEV-ES guest.
- Clean up the recognition of emulation failures on SEV guests, when
KVM would like to "skip" the instruction but it had already been
partially emulated. This makes it possible to drop a hack that
second guessed the (insufficient) information provided by the
emulator, and just do the right thing.
Documentation:
- Various updates and fixes, mostly for x86
- MTRR and PAT fixes and optimizations"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (164 commits)
KVM: selftests: Avoid using forced target for generating arm64 headers
tools headers arm64: Fix references to top srcdir in Makefile
KVM: arm64: Add tracepoint for MMIO accesses where ISV==0
KVM: arm64: selftest: Perform ISB before reading PAR_EL1
KVM: arm64: selftest: Add the missing .guest_prepare()
KVM: arm64: Always invalidate TLB for stage-2 permission faults
KVM: x86: Service NMI requests after PMI requests in VM-Enter path
KVM: arm64: Handle AArch32 SPSR_{irq,abt,und,fiq} as RAZ/WI
KVM: arm64: Do not let a L1 hypervisor access the *32_EL2 sysregs
KVM: arm64: Refine _EL2 system register list that require trap reinjection
arm64: Add missing _EL2 encodings
arm64: Add missing _EL12 encodings
KVM: selftests: aarch64: vPMU test for validating user accesses
KVM: selftests: aarch64: vPMU register test for unimplemented counters
KVM: selftests: aarch64: vPMU register test for implemented counters
KVM: selftests: aarch64: Introduce vpmu_counter_access test
tools: Import arm_pmuv3.h
KVM: arm64: PMU: Allow userspace to limit PMCR_EL0.N for the guest
KVM: arm64: Sanitize PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR} before first run
KVM: arm64: Add {get,set}_user for PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR}
...
|
||
|
Linus Torvalds
|
43468456c9 |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"Nothing exciting this cycle, most of the diffstat is changing SPDX
'or' to 'OR'.
Summary:
- Bugfixes for hns, mlx5, and hfi1
- Hardening patches for size_*, counted_by, strscpy
- rts fixes from static analysis
- Dump SRQ objects in rdma netlink, with hns support
- Fix a performance regression in mlx5 MR deregistration
- New XDR (200Gb/lane) link speed
- SRQ record doorbell latency optimization for hns
- IPSEC support for mlx5 multi-port mode
- ibv_rereg_mr() support for irdma
- Affiliated event support for bnxt_re
- Opt out for the spec compliant qkey security enforcement as we
discovered SW that breaks under enforcement
- Comment and trivial updates"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (50 commits)
IB/mlx5: Fix init stage error handling to avoid double free of same QP and UAF
RDMA/mlx5: Fix mkey cache WQ flush
RDMA/hfi1: Workaround truncation compilation error
IB/hfi1: Fix potential deadlock on &irq_src_lock and &dd->uctxt_lock
RDMA/core: Remove NULL check before dev_{put, hold}
RDMA/hfi1: Remove redundant assignment to pointer ppd
RDMA/mlx5: Change the key being sent for MPV device affiliation
RDMA/bnxt_re: Fix clang -Wimplicit-fallthrough in bnxt_re_handle_cq_async_error()
RDMA/hns: Fix init failure of RoCE VF and HIP08
RDMA/hns: Fix unnecessary port_num transition in HW stats allocation
RDMA/hns: The UD mode can only be configured with DCQCN
RDMA/hns: Add check for SL
RDMA/hns: Fix signed-unsigned mixed comparisons
RDMA/hns: Fix uninitialized ucmd in hns_roce_create_qp_common()
RDMA/hns: Fix printing level of asynchronous events
RDMA/core: Add support to set privileged QKEY parameter
RDMA/bnxt_re: Do not report SRQ error in srq notification
RDMA/bnxt_re: Report async events and errors
RDMA/bnxt_re: Update HW interface headers
IB/mlx5: Fix rdma counter binding for RAW QP
...
|
||
|
Linus Torvalds
|
edd8e84ae9 |
Merge tag 'sound-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Most of changes at this time are for ASoC, spread over ASoC core and
drivers due to the API prefix standardization.
Other than that, there have little change wrt API, rather lots of
driver-specific updates and fixes.
Some highlight below:
ASoC:
- Standardization of API prefix
- GPIO API usage improvements
- Support for HDA patches
- Lots of work on SOF, including crash dump support
- Fixes for noise when stopping some Sounwire CODECs
- Support for AMD platforms with es83xx, AMD ACP 6.3 and 7.0, Awinc
AT87390 and AW88399, many Intel platforms, many Mediatek platforms,
Qualcomm SM6115 and SC7180 platforms, Richtek RTQ9128 and Texas
Instruments TAS575x
HD-audio and USB-audio:
- Deferred probe support of audio component binding
- More fixes and enhancements for Cirrus subcodecs
- USB Scarlett2 mixer and McIntosh DSD quirk
Others:
- More enhancement of snd-aloop driver
- Update MAINTAINERS entry for linux-sound mailing list"
* tag 'sound-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (485 commits)
ALSA: hda: cs35l41: Fix missing error code in cs35l41_smart_amp()
ALSA: hda: cs35l41: mark cs35l41_verify_id() static
ASoC: codecs: wsa883x: make use of new mute_unmute_on_trigger flag
ASoC: soc-dai: add flag to mute and unmute stream during trigger
ASoC: ams-delta.c: use component after check
ASoC: amd: acp: select SND_SOC_AMD_ACP_LEGACY_COMMON for ACP63
ASoC: codecs: aw88399: fix typo in Kconfig select
ASoC: amd: acp: add ACPI dependency
ASoC: Intel: avs: Add rt5514 machine board
ASoC: Intel: avs: Add rt5514 machine board
ALSA: scarlett2: Add missing check with firmware version control
ALSA: virtio: use ack callback
ALSA: scarlett2: Remap Level Meter values
ALSA: scarlett2: Allow passing any output to line_out_remap()
ALSA: scarlett2: Add support for reading firmware version
ALSA: scarlett2: Rename Gen 3 config sets
ALSA: scarlett2: Rename scarlett_gen2 to scarlett2
ASoC: cs35l41: Detect CSPL errors when sending CSPL commands
ALSA: hda: cs35l41: Check CSPL state after loading firmware
ALSA: hda: cs35l41: Do not unload firmware before reset in system suspend
...
|