When KCOV or GCOV is enabled, dead code can be left behind, in which
case objtool silences unreachable and undefined behavior (fallthrough)
warnings.
Fallthrough warnings, and their variant "end of section" warnings, were
silenced with the following commit:
6b023c7842 ("objtool: Silence more KCOV warnings")
Another variant of a fallthrough warning is a jump to the end of a
function. If that function happens to be at the end of a section, the
jump destination doesn't actually exist.
Normally that would be a fatal objtool error, but for KCOV/GCOV it's
just another undefined behavior fallthrough. Silence it like the
others.
Fixes the following warning:
drivers/iommu/dma-iommu.o: warning: objtool: iommu_dma_sw_msi+0x92: can't find jump dest instruction at .text+0x54d5
Fixes: 6b023c7842 ("objtool: Silence more KCOV warnings")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/08fbe7d7e1e20612206f1df253077b94f178d93e.1743481539.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/314f8809-cd59-479b-97d7-49356bf1c8d1@infradead.org/
Access psid->sub_auth[psid->num_subauth - 1] without checking
if num_subauth is non-zero leads to an out-of-bounds read.
This patch adds a validation step to ensure num_subauth != 0
before sub_auth is accessed.
Cc: stable@vger.kernel.org
Signed-off-by: Norbert Szetei <norbert@doyensec.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The dacloffset field was originally typed as int and used in an
unchecked addition, which could overflow and bypass the existing
bounds check in both smb_check_perm_dacl() and smb_inherit_dacl().
This could result in out-of-bounds memory access and a kernel crash
when dereferencing the DACL pointer.
This patch converts dacloffset to unsigned int and uses
check_add_overflow() to validate access to the DACL.
Cc: stable@vger.kernel.org
Signed-off-by: Norbert Szetei <norbert@doyensec.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
There is a race condition between session setup and
ksmbd_sessions_deregister. The session can be freed before the connection
is added to channel list of session.
This patch check reference count of session before freeing it.
Cc: stable@vger.kernel.org
Reported-by: Sean Heelan <seanheelan@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull Rust fix from Miguel Ojeda:
"Fix 'generate_rust_analyzer.py' due to typo during merge"
Mea culpa, mea maxima culpa.
* tag 'rust-fixes-6.15-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
scripts: generate_rust_analyzer: fix pin-init name in kernel deps
Pull more bcachefs updates from Kent Overstreet:
"All bugfixes and logging improvements"
* tag 'bcachefs-2025-03-31' of git://evilpiepirate.org/bcachefs: (35 commits)
bcachefs: fix bch2_write_point_to_text() units
bcachefs: Log original key being moved in data updates
bcachefs: BCH_JSET_ENTRY_log_bkey
bcachefs: Reorder error messages that include journal debug
bcachefs: Don't use designated initializers for disk_accounting_pos
bcachefs: Silence errors after emergency shutdown
bcachefs: fix units in rebalance_status
bcachefs: bch2_ioctl_subvolume_destroy() fixes
bcachefs: Clear fs_path_parent on subvolume unlink
bcachefs: Change btree_insert_node() assertion to error
bcachefs: Better printing of inconsistency errors
bcachefs: bch2_count_fsck_err()
bcachefs: Better helpers for inconsistency errors
bcachefs: Consistent indentation of multiline fsck errors
bcachefs: Add an "ignore unknown" option to bch2_parse_mount_opts()
bcachefs: bch2_time_stats_init_no_pcpu()
bcachefs: Fix bch2_fs_get_tree() error path
bcachefs: fix logging in journal_entry_err_msg()
bcachefs: add missing newline in bch2_trans_updates_to_text()
bcachefs: print_string_as_lines: fix extra newline
...
Pull ext2, udf, and isofs updates from Jan Kara:
- conversion of ext2 to the new mount API
- small folio conversion work for ext2
- a fix of an unexpected return value in udf in inode_getblk()
- a fix of handling of corrupted directory in isofs
* tag 'fs_for_v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Fix inode_getblk() return value
ext2: Make ext2_params_spec static
ext2: create ext2_msg_fc for use during parsing
ext2: convert to the new mount API
ext2: Remove reference to bh->b_page
isofs: fix KMSAN uninit-value bug in do_isofs_readdir()
Pull exfat updates from Namjae Jeon:
- Fix random stack corruption and incorrect error returns in
exfat_get_block()
- Optimize exfat_get_block() by improving checking corner cases
- Fix an endless loop by self-linked chain in exfat_find_last_cluster
- Remove dead EXFAT_CLUSTERS_UNTRACKED codes
- Add missing shutdown check
- Improve the delete performance with discard mount option
* tag 'exfat-for-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: call bh_read in get_block only when necessary
exfat: fix potential wrong error return from get_block
exfat: fix missing shutdown check
exfat: fix the infinite loop in exfat_find_last_cluster()
exfat: fix random stack corruption after get_block
exfat: remove count used cluster from exfat_statfs()
exfat: support batch discard of clusters when freeing clusters
Pull smb server updates from Steve French:
- Two fixes for bounds checks of open contexts
- Two multichannel fixes, including one for important UAF
- Oplock/lease break fix for potential ksmbd connection refcount leak
- Security fix to free crypto data more securely
- Fix to enable allowing Kerberos authentication by default
- Two RDMA/smbdirect fixes
- Minor cleanup
* tag 'v6.15rc-part1-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix r_count dec/increment mismatch
ksmbd: fix multichannel connection failure
ksmbd: fix use-after-free in ksmbd_sessions_deregister()
ksmbd: use ib_device_get_netdev() instead of calling ops.get_netdev
ksmbd: use aead_request_free to match aead_request_alloc
Revert "ksmbd: fix missing RDMA-capable flag for IPoIB device in ksmbd_rdma_capable_netdev()"
ksmbd: add bounds check for create lease context
ksmbd: add bounds check for durable handle context
ksmbd: make SMB_SERVER_KERBEROS5 enable by default
ksmbd: Use str_read_write() and str_true_false() helpers
Pull smb client updates from Steve French:
- Fix for network namespace refcount leak
- Multichannel fix and minor multichannel debug message cleanup
- Fix potential null ptr reference in SMB3 close
- Fix for special file handling when reparse points not supported by
server
- Two ACL fixes one for stricter ACE validation, one for incorrect
perms requested
- Three RFC1001 fixes: one for SMB3 mounts on port 139, one for better
default hostname, and one for better session response processing
- Minor update to email address for MAINTAINERS file
- Allow disabling Unicode for access to old SMB1 servers
- Three minor cleanups
* tag '6.15-rc-part1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Add new mount option -o nounicode to disable SMB1 UNICODE mode
cifs: Set default Netbios RFC1001 server name to hostname in UNC
smb: client: Fix netns refcount imbalance causing leaks and use-after-free
cifs: add validation check for the fields in smb_aces
CIFS: Propagate min offload along with other parameters from primary to secondary channels.
cifs: Improve establishing SMB connection with NetBIOS session
cifs: Fix establishing NetBIOS session for SMB2+ connection
cifs: Fix getting DACL-only xattr system.cifs_acl and system.smb3_acl
cifs: Check if server supports reparse points before using them
MAINTAINERS: reorder preferred email for Steve French
cifs: avoid NULL pointer dereference in dbg call
smb: client: Remove redundant check in smb2_is_path_accessible()
smb: client: Remove redundant check in cifs_oplock_break()
smb: mark the new channel addition log as informational log with cifs_info
smb: minor cleanup to remove unused function declaration
Pull nfsd updates from Chuck Lever:
"Neil Brown contributed more scalability improvements to NFSD's open
file cache, and Jeff Layton contributed a menagerie of repairs to
NFSD's NFSv4 callback / backchannel implementation.
Mike Snitzer contributed a change to NFS re-export support that
disables support for file locking on a re-exported NFSv4 mount. This
is because NFSv4 state recovery is currently difficult if not
impossible for re-exported NFS mounts. The change aims to prevent data
integrity exposures after the re-export server crashes.
Work continues on the evolving NFSD netlink administrative API.
Many thanks to the contributors, reviewers, testers, and bug reporters
who participated during the v6.15 development cycle"
* tag 'nfsd-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (45 commits)
NFSD: Add a Kconfig setting to enable delegated timestamps
sysctl: Fixes nsm_local_state bounds
nfsd: use a long for the count in nfsd4_state_shrinker_count()
nfsd: remove obsolete comment from nfs4_alloc_stid
nfsd: remove unneeded forward declaration of nfsd4_mark_cb_fault()
nfsd: reorganize struct nfs4_delegation for better packing
nfsd: handle errors from rpc_call_async()
nfsd: move cb_need_restart flag into cb_flags
nfsd: replace CB_GETATTR_BUSY with NFSD4_CALLBACK_RUNNING
nfsd: eliminate cl_ra_cblist and NFSD4_CLIENT_CB_RECALL_ANY
nfsd: prevent callback tasks running concurrently
nfsd: disallow file locking and delegations for NFSv4 reexport
nfsd: filecache: drop the list_lru lock during lock gc scans
nfsd: filecache: don't repeatedly add/remove files on the lru list
nfsd: filecache: introduce NFSD_FILE_RECENT
nfsd: filecache: use list_lru_walk_node() in nfsd_file_gc()
nfsd: filecache: use nfsd_file_dispose_list() in nfsd_file_close_inode_sync()
NFSD: Re-organize nfsd_file_gc_worker()
nfsd: filecache: remove race handling.
fs: nfs: acl: Avoid -Wflex-array-member-not-at-end warning
...
This reverts commit 0de2a5c4b8.
I forgot that a TCP socket could receive messages in its error queue.
sock_queue_err_skb() can be called without socket lock being held,
and changes sk->sk_rmem_alloc.
The fact that skbs in error queue are limited by sk->sk_rcvbuf
means that error messages can be dropped if socket receive
queues are full, which is an orthogonal issue.
In future kernels, we could use a separate sk->sk_error_mem_alloc
counter specifically for the error queue.
Fixes: 0de2a5c4b8 ("tcp: avoid atomic operations on sk->sk_rmem_alloc")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250331075946.31960-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All the misc entry points end up calling into either gve_open()
or gve_close(), they take rtnl_lock today but since the recent
instance locking changes should also take the instance lock.
Found by code inspection and untested.
Fixes: cae03e5bdd ("net: hold netdev instance lock during queue operations")
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Link: https://patch.msgid.link/20250328164742.1268069-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts says:
====================
mptcp: misc. fixes for 6.15-rc0
Here are 4 unrelated patches:
- Patch 1: fix a NULL pointer when two SYN-ACK for the same request are
handled in parallel. A fix for up to v5.9.
- Patch 2: selftests: fix check for the wrong FD. A fix for up to v5.17.
- Patch 3: selftests: close all FDs in case of error. A fix for up to
v5.17.
- Patch 4: selftests: ignore a new generated file. A fix for 6.15-rc0.
====================
Link: https://patch.msgid.link/20250328-net-mptcp-misc-fixes-6-15-v1-0-34161a482a7f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When testing valkey benchmark tool with MPTCP, the kernel panics in
'mptcp_can_accept_new_subflow' because subflow_req->msk is NULL.
Call trace:
mptcp_can_accept_new_subflow (./net/mptcp/subflow.c:63 (discriminator 4)) (P)
subflow_syn_recv_sock (./net/mptcp/subflow.c:854)
tcp_check_req (./net/ipv4/tcp_minisocks.c:863)
tcp_v4_rcv (./net/ipv4/tcp_ipv4.c:2268)
ip_protocol_deliver_rcu (./net/ipv4/ip_input.c:207)
ip_local_deliver_finish (./net/ipv4/ip_input.c:234)
ip_local_deliver (./net/ipv4/ip_input.c:254)
ip_rcv_finish (./net/ipv4/ip_input.c:449)
...
According to the debug log, the same req received two SYN-ACK in a very
short time, very likely because the client retransmits the syn ack due
to multiple reasons.
Even if the packets are transmitted with a relevant time interval, they
can be processed by the server on different CPUs concurrently). The
'subflow_req->msk' ownership is transferred to the subflow the first,
and there will be a risk of a null pointer dereference here.
This patch fixes this issue by moving the 'subflow_req->msk' under the
`own_req == true` conditional.
Note that the !msk check in subflow_hmac_valid() can be dropped, because
the same check already exists under the own_req mpj branch where the
code has been moved to.
Fixes: 9466a1cceb ("mptcp: enable JOIN requests even if cookies are in use")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250328-net-mptcp-misc-fixes-6-15-v1-1-34161a482a7f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the netdev_nl_sock_priv_destroy(), an instance lock is acquired
before calling net_devmem_unbind_dmabuf(), then releasing an instance
lock(netdev_unlock(binding->dev)).
However, a binding is freed in the net_devmem_unbind_dmabuf().
So using a binding after net_devmem_unbind_dmabuf() occurs UAF.
To fix this UAF, it needs to use temporary variable.
Fixes: ba6f418fbf ("net: bubble up taking netdev instance lock to callers of net_devmem_unbind_dmabuf()")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250328062237.3746875-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This was previously hard to hit since it requires racing with device
removal, but splitting up io_ref uncovered it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
For striping across devices, we maintain "clocks", and we advance them
by the inverse of "how much free space this device has left", so that we
round robin biased in favor of devices with more free space.
This code was originally trying to do EWMA-ish stuff when originally
written, ~10 years ago, and was never properly cleaned up when it was
realized that an EWMA is not the right approach here.
That left a bug, when we rescale to keep all the clocks in the correct
range and prevent overflow.
It was assumed that we'd always be allocated from the device with the
smallest clock hand, but that's actually not correct: with the target
options, allocations will be first tried from a subset of devices, and
then the entire filesystem if that fails.
Thus, the rescale from the first allocation - allocating from a subset
of devices - can pick the wrong rescale value and cause the rest of the
clocks to go to 0, losing information.
This resuls in incorrect striping behaviour when the desired number of
replicas doesn't fit on the foreground target.
Link: https://www.reddit.com/r/bcachefs/comments/1jn3t26/replica_allocation_not_evenly_distributed_among/
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
It turns out the code to generate the x86 cpufeaturemasks.h header was
way too aggressive, and would re-generate it whenever the timestamp on
the kernel config file changed.
Now, the regular 'make *config' tools are fairly careful to not rewrite
the kernel config file unless the contents change, but other usecases
aren't that careful.
Michael Kelley reports that 'make-kpkg' ends up doing "make syncconfig"
multiple times in prepping to build, and will modify the config file in
the process (and then modify it back, but by then the timestamps have
changed).
Jakub Kicinski reports that the netdev CI does something similar in how
it generates the config file in multiple steps.
In both cases, the config file timestamp updates then cause the
cpufeaturemasks.h file to be regenerated, and that in turn then causes
lots of unnecessary rebuilds due to all the normal dependencies.
Fix it by using our 'filechk' infrastructure in the Makefile to generate
the header file. That will only write a new version of the file if the
contents of the file have actually changed.
Fixes: 841326332b ("x86/cpufeatures: Generate the <asm/cpufeaturemasks.h> header based on build config")
Reported-by: Michael Kelley <mhklinux@outlook.com>
Reported-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/all/SN6PR02MB415756D1829740F6E8AC11D1D4D82@SN6PR02MB4157.namprd02.prod.outlook.com/
Link: https://lore.kernel.org/all/20250328162311.08134fa6@kernel.org/
Cc: Peter Anvin <hpa@zytor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull ring-buffer updates from Steven Rostedt:
- Restructure the persistent memory to have a "scratch" area
Instead of hard coding the KASLR offset in the persistent memory by
the ring buffer, push that work up to the callers of the persistent
memory as they are the ones that need this information. The offsets
and such is not important to the ring buffer logic and it should not
be part of that.
A scratch pad is now created when the caller allocates a ring buffer
from persistent memory by stating how much memory it needs to save.
- Allow where modules are loaded to be saved in the new scratch pad
Save the addresses of modules when they are loaded into the
persistent memory scratch pad.
- A new module_for_each_mod() helper function was created
With the acknowledgement of the module maintainers a new module
helper function was created to iterate over all the currently loaded
modules. This has a callback to be called for each module. This is
needed for when tracing is started in the persistent buffer and the
currently loaded modules need to be saved in the scratch area.
- Expose the last boot information where the kernel and modules were
loaded
The last_boot_info file is updated to print out the addresses of
where the kernel "_text" location was loaded from a previous boot, as
well as where the modules are loaded. If the buffer is recording the
current boot, it only prints "# Current" so that it does not expose
the KASLR offset of the currently running kernel.
- Allow the persistent ring buffer to be released (freed)
To have this in production environments, where the kernel command
line can not be changed easily, the ring buffer needs to be freed
when it is not going to be used. The memory for the buffer will
always be allocated at boot up, but if the system isn't going to
enable tracing, the memory needs to be freed. Allow it to be freed
and added back to the kernel memory pool.
- Allow stack traces to print the function names in the persistent
buffer
Now that the modules are saved in the persistent ring buffer, if the
same modules are loaded, the printing of the function names will
examine the saved modules. If the module is found in the scratch area
and is also loaded, then it will do the offset shift and use kallsyms
to display the function name. If the address is not found, it simply
displays the address from the previous boot in hex.
* tag 'trace-ringbuffer-v6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Use _text and the kernel offset in last_boot_info
tracing: Show last module text symbols in the stacktrace
ring-buffer: Remove the unused variable bmeta
tracing: Skip update_last_data() if cleared and remove active check for save_mod()
tracing: Initialize scratch_size to zero to prevent UB
tracing: Fix a compilation error without CONFIG_MODULES
tracing: Freeable reserved ring buffer
mm/memblock: Add reserved memory release function
tracing: Update modules to persistent instances when loaded
tracing: Show module names and addresses of last boot
tracing: Have persistent trace instances save module addresses
module: Add module_for_each_mod() function
tracing: Have persistent trace instances save KASLR offset
ring-buffer: Add ring_buffer_meta_scratch()
ring-buffer: Add buffer meta data for persistent ring buffer
ring-buffer: Use kaslr address instead of text delta
ring-buffer: Fix bytes_dropped calculation issue
Merge series from srinivas.kandagatla@linaro.org:
On Qualcomm Audioreach setup, some of the audio artifacts are seen in
both recording and playback. These patches fix issues by
1. Adjusting the fragment size that dsp can service.
2. schedule available playback buffers in time for dsp to not hit under runs
3. remove some of the manual calculations done to get hardware pointer.
With these patches, am able to see significant Audio quality improvements.
I have few more patches to optimize the dsp drivers, but for now am
keeping this series simple to address the underruns and overruns issues
noticed in pipewire setup.
Any testing would be appreciated.
Please note that on pipewire min-latency has to be set to 512 which
reflects the DSP latency requirements of 10ms. You might see audio
artifacts like glitches if you try to play audio below 256 latency.
Pull tracing documentation fix from Steven Rostedt:
"Documentation fix for runtime verifier
The runtime verifier documents that were created were not referenced
in the indices, which caused warning when building the documentation
tree. Those documents are now added to the rv indices"
* tag 'trace-latency-v6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
Documentation/rv: Add sched pages to the indices
Pull perf tools updates from Namhyung Kim:
"perf record:
- Introduce latency profiling using scheduler information.
The latency profiling is to show impacts on wall-time rather than
cpu-time. By tracking context switches, it can weight samples and
find which part of the code contributed more to the execution
latency.
The value (period) of the sample is weighted by dividing it by the
number of parallel execution at the moment. The parallelism is
tracked in perf report with sched-switch records. This will reduce
the portion that are run in parallel and in turn increase the
portion of serial executions.
For now, it's limited to profile processes, IOW system-wide
profiling is not supported. You can add --latency option to enable
this.
$ perf record --latency -- make -C tools/perf
I've run the above command for perf build which adds -j option to
make with the number of CPUs in the system internally. Normally
it'd show something like below:
$ perf report -F overhead,comm
...
#
# Overhead Command
# ........ ...............
#
78.97% cc1
6.54% python3
4.21% shellcheck
3.28% ld
1.80% as
1.37% cc1plus
0.80% sh
0.62% clang
0.56% gcc
0.44% perl
0.39% make
...
The cc1 takes around 80% of the overhead as it's the actual
compiler. However it runs in parallel so its contribution to
latency may be less than that. Now, perf report will show both
overhead and latency (if --latency was given at record time) like
below:
$ perf report -s comm
...
#
# Overhead Latency Command
# ........ ........ ...............
#
78.97% 48.66% cc1
6.54% 25.68% python3
4.21% 0.39% shellcheck
3.28% 13.70% ld
1.80% 2.56% as
1.37% 3.08% cc1plus
0.80% 0.98% sh
0.62% 0.61% clang
0.56% 0.33% gcc
0.44% 1.71% perl
0.39% 0.83% make
...
You can see latency of cc1 goes down to around 50% and python3 and
ld contribute a lot more than their overhead. You can use --latency
option in perf report to get the same result but ordered by
latency.
$ perf report --latency -s comm
perf report:
- As a side effect of the latency profiling work, it adds a new
output field 'latency' and a sort key 'parallelism'. The below is a
result from my system with 64 CPUs. The build was well-parallelized
but contained some serial portions.
$ perf report -s parallelism
...
#
# Overhead Latency Parallelism
# ........ ........ ...........
#
16.95% 1.54% 62
13.38% 1.24% 61
12.50% 70.47% 1
11.81% 1.06% 63
7.59% 0.71% 60
4.33% 12.20% 2
3.41% 0.33% 59
2.05% 0.18% 64
1.75% 1.09% 9
1.64% 1.85% 5
...
- Support Feodra mini-debuginfo which is a LZMA compressed symbol
table inside ".gnu_debugdata" ELF section.
perf annotate:
- Add --code-with-type option to enable data-type profiling with the
usual annotate output.
Instead of focusing on data structure, it shows code annotation
together with data type it accesses in case the instruction refers
to a memory location (and it was able to resolve the target data
type). Currently it only works with --stdio.
$ perf annotate --stdio --code-with-type
...
Percent | Source code & Disassembly of vmlinux for cpu/mem-loads,ldlat=30/pp (18 samples, percent: local period)
----------------------------------------------------------------------------------------------------------------------
: 0 0xffffffff81050610 <__fdget>:
0.00 : ffffffff81050610: callq 0xffffffff81c01b80 <__fentry__> # data-type: (stack operation)
0.00 : ffffffff81050615: pushq %rbp # data-type: (stack operation)
0.00 : ffffffff81050616: movq %rsp, %rbp
0.00 : ffffffff81050619: pushq %r15 # data-type: (stack operation)
0.00 : ffffffff8105061b: pushq %r14 # data-type: (stack operation)
0.00 : ffffffff8105061d: pushq %rbx # data-type: (stack operation)
0.00 : ffffffff8105061e: subq $0x10, %rsp
0.00 : ffffffff81050622: movl %edi, %ebx
0.00 : ffffffff81050624: movq %gs:0x7efc4814(%rip), %rax # 0x14e40 <current_task> # data-type: struct task_struct* +0
0.00 : ffffffff8105062c: movq 0x8d0(%rax), %r14 # data-type: struct task_struct +0x8d0 (files)
0.00 : ffffffff81050633: movl (%r14), %eax # data-type: struct files_struct +0 (count.counter)
0.00 : ffffffff81050636: cmpl $0x1, %eax
0.00 : ffffffff81050639: je 0xffffffff810506a9 <__fdget+0x99>
0.00 : ffffffff8105063b: movq 0x20(%r14), %rcx # data-type: struct files_struct +0x20 (fdt)
0.00 : ffffffff8105063f: movl (%rcx), %eax # data-type: struct fdtable +0 (max_fds)
0.00 : ffffffff81050641: cmpl %ebx, %eax
0.00 : ffffffff81050643: jbe 0xffffffff810506ef <__fdget+0xdf>
0.00 : ffffffff81050649: movl %ebx, %r15d
5.56 : ffffffff8105064c: movq 0x8(%rcx), %rdx # data-type: struct fdtable +0x8 (fd)
...
The "# data-type:" part was added with this change. The first few
entries are not very interesting. But later you can it accesses a
couple of fields in the task_struct, files_struct and fdtable.
perf trace:
- Support syscall tracing for different ABI. For example it can trace
system calls for 32-bit applications on 64-bit kernel
transparently.
- Add --summary-mode=total option to show global syscall summary. The
default is 'thread' to show per-thread syscall summary.
Python support:
- Add more interfaces to 'perf' module to parse events, and config,
enable or disable the event list properly so that it can implement
basic functionalities purely in Python. There is an example code
for these new interfaces in python/tracepoint.py.
- Add mypy and pylint support to enable build time checking. Fix some
code based on the findings from these tools.
Internals:
- Introduce io_dir__readdir() API to make directory traveral (usually
for proc or sysfs) efficient with less memory footprint.
JSON vendor events:
- Add events and metrics for ARM Neoverse N3 and V3
- Update events and metrics on various Intel CPUs
- Add/update events for a number of SiFive processors"
* tag 'perf-tools-for-v6.15-2025-03-27' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (229 commits)
perf bpf-filter: Fix a parsing error with comma
perf report: Fix a memory leak for perf_env on AMD
perf trace: Fix wrong size to bpf_map__update_elem call
perf tools: annotate asm_pure_loop.S
perf python: Fix setup.py mypy errors
perf test: Address attr.py mypy error
perf build: Add pylint build tests
perf build: Add mypy build tests
perf build: Rename TEST_LOGS to SHELL_TEST_LOGS
tools/build: Don't pass test log files to linker
perf bench sched pipe: fix enforced blocking reads in worker_thread
perf tools: Fix is_compat_mode build break in ppc64
perf build: filter all combinations of -flto for libperl
perf vendor events arm64 AmpereOneX: Fix frontend_bound calculation
perf vendor events arm64: AmpereOne/AmpereOneX: Mark LD_RETIRED impacted by errata
perf trace: Fix evlist memory leak
perf trace: Fix BTF memory leak
perf trace: Make syscall table stable
perf syscalltbl: Mask off ABI type for MIPS system calls
perf build: Remove Makefile.syscalls
...
Should an error occur after a successful regulator_bulk_enable() call,
regulator_bulk_disable() should be called, as already done in the remove
function.
Instead of adding an error handling path in the probe, switch from
devm_regulator_bulk_get() to devm_regulator_bulk_get_enable() and
simplify the remove function and some other places accordingly.
Finally, add a missing const when defining rt5665_supply_names to please
checkpatch and constify a few bytes.
Fixes: 33ada14a26 ("ASoC: add rt5665 codec driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/e3c2aa1b2fdfa646752d94f4af968630c0d58248.1742629525.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
