Pull Kbuild fixes from Nathan Chancellor:
- Strip trailing padding bytes from modules.builtin.modinfo to fix
error during modules_install with certain versions of kmod
- Drop unused static inline function warning in .c files with clang
from W=1 to W=2
- Ensure kernel-doc.py invocations use the PYTHON3 make variable to
ensure user's choice of Python interpreter is always respected
* tag 'kbuild-fixes-6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: Let kernel-doc.py use PYTHON3 override
compiler_types: Move unused static inline functions warning to W=2
kbuild: Strip trailing padding bytes from modules.builtin.modinfo
It is possible to force a specific version of python to be used when
building the kernel by passing PYTHON3= on the make command line.
However kernel-doc.py is currently called with python3 hard-coded and
thus ignores this setting.
Use $(PYTHON3) to run $(KERNELDOC) so that the desired version of
python is used.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://patch.msgid.link/20251107192933.2bfe9e57@endymion
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
This reverts commit ebe7556050.
Tested the latest kernel on my GB203 and this seems to break it somehow.
Nov 09 04:16:14 bighp kernel: nouveau 0000:02:00.0: gsp: GSP-FMC boot failed (mbox: 0x0000000b)
Nov 09 04:16:14 bighp kernel: nouveau 0000:02:00.0: gsp: init failed, -5
Nov 09 04:16:14 bighp kernel: nouveau 0000:02:00.0: init failed with -5
Nov 09 04:16:14 bighp kernel: nouveau: drm:00000000:00000080: init failed with -5
Nov 09 04:16:14 bighp kernel: nouveau 0000:02:00.0: drm: Device allocation failed: -5
Nov 09 04:16:14 bighp kernel: nouveau 0000:02:00.0: probe with driver nouveau failed with error -5
Not sure why, I went over the patch and thought it should have worked, but there must be some
32-bit problem maybe in the FMC boot path.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Prevent application hangs caused by out-of-order fence signaling when
user fences are attached. Use drm_syncobj (via dma-fence-chain) to
guarantee that each user fence signals in order, regardless of the
signaling order of the attached fences. Ensure user fence writebacks to
user space occur in the correct sequence.
v7:
- Skip drm_syncbj create of error (CI)
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20251031234050.3043507-2-matthew.brost@intel.com
(cherry picked from commit adda4e855a)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
[Why]
drm_dp_mst_topology_queue_probe() is used under the assumption that
mst is already initialized. If we connect system with SST first
then switch to the mst branch during suspend, we will fail probing
topology by calling the wrong API since the mst manager is yet to
be initialized.
[How]
At dm_resume(), once it's detected as mst branc connected, check if
the mst is initialized already. If not, call
dm_helpers_dp_mst_start_top_mgr() instead to initialize mst
V2: Adjust the commit msg a bit
Fixes: bc068194f5 ("drm/amd/display: Don't write DP_MSTM_CTRL after LT")
Cc: Fangzhi Zuo <jerry.zuo@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 62320fb8d9)
Cc: stable@vger.kernel.org
commit c760bcda83 ("drm/amd: Check whether secure display TA loaded
successfully") attempted to fix extra messages, but failed to port the
cleanup that was in commit 5c6d52ff4b ("drm/amd: Don't try to enable
secure display TA multiple times") to prevent multiple tries.
Add that to the failure handling path even on a quick failure.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4679
Fixes: c760bcda83 ("drm/amd: Check whether secure display TA loaded successfully")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4104c0a454)
On PF passthrough environment, after hibernate and then resume, coralgemm
will cause gpu page fault.
Mode1 reset happens during hibernate, but partition mode is not restored
on resume, register mmCP_HYP_XCP_CTL and mmCP_PSP_XCP_CTL is not right
after resume. When CP access the MQD BO, wrong stride size is used,
this will cause out of bound access on the MQD BO, resulting page fault.
The fix is to ensure gfx_v9_4_3_switch_compute_partition() is called
when resume from a hibernation.
KFD resume is called separately during a reset recovery or resume from
suspend sequence. Hence it's not required to be called as part of
partition switch.
Signed-off-by: Samuel Zhang <guoqing.zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5d1b32cfe4)
The DRM_GEM_SHMEM_HELPER helper requires MMU enabled because it uses
vmf_insert_pfn() in its mmap implementation. On NOMMU configurations
(e.g. some RISC-V randconfig builds), this symbol is unavailable and
selecting DRM_GEM_SHMEM_HELPER causes a modpost undefined reference:
ERROR: modpost: "vmf_insert_pfn" [drivers/gpu/drm/drm_shmem_helper.ko] undefined!
Normally, Kconfig prevents this helper from being selected when
CONFIG_MMU=n. However, in some randconfig builds (such as those used by
0day CI), select statements can override unmet dependencies, triggering
the issue.
Add an explicit dependency on MMU to DRM_PIXPAPER to prevent this.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202510280213.0rlYA4T3-lkp@intel.com/
Fixes: 0c4932f6dd ("drm/tiny: pixpaper: Fix missing dependency on DRM_GEM_SHMEM_HELPER")
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: LiangCheng Wang <zaq14760@gmail.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20251028-bar-v1-1-edfbd13fafff@gmail.com
8 and 16 bit formats use a different layout on
GB20x than they did on prior chips. Add the
corresponding DRM format modifiers to the list of
modifiers supported by the display engine on such
chips, and filter the supported modifiers for each
format based on its bytes per pixel in
nv50_plane_format_mod_supported().
Note this logic will need to be updated when GB10
support is added, since it is a GB20x chip that
uses the pre-GB20x sector layout for all formats.
Fixes: 6cc6e08d45 ("drm/nouveau/kms: add support for GB20x")
Signed-off-by: James Jones <jajones@nvidia.com>
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20251030181153.1208-3-jajones@nvidia.com
Set the DMA mask before calling nvkm_device_ctor(), so that when the
flush page is created in nvkm_fb_ctor(), the allocation will not fail
if the page is outside of DMA address space, which can easily happen if
IOMMU is disable. In such situations, you will get an error like this:
nouveau 0000:65:00.0: DMA addr 0x0000000107c56000+4096 overflow (mask ffffffff, bus limit 0).
Commit 38f5359354 ("rm/nouveau/pci: set streaming DMA mask early")
set the mask after calling nvkm_device_ctor(), but back then there was
no flush page being created, which might explain why the mask wasn't
set earlier.
Flush page allocation was added in commit 5728d06419 ("drm/nouveau/fb:
handle sysmem flush page from common code"). nvkm_fb_ctor() calls
alloc_page(), which can allocate a page anywhere in system memory, but
then calls dma_map_page() on that page. But since the DMA mask is still
set to 32, the map can fail if the page is allocated above 4GB. This is
easy to reproduce on systems with a lot of memory and IOMMU disabled.
An alternative approach would be to force the allocation of the flush
page to low memory, by specifying __GFP_DMA32. However, this would
always allocate the page in low memory, even though the hardware can
access high memory.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20251014174512.3172102-1-ttabi@nvidia.com
The Mesa issue referenced below pointed out a possible deadlock:
[ 1231.611031] Possible interrupt unsafe locking scenario:
[ 1231.611033] CPU0 CPU1
[ 1231.611034] ---- ----
[ 1231.611035] lock(&xa->xa_lock#17);
[ 1231.611038] local_irq_disable();
[ 1231.611039] lock(&fence->lock);
[ 1231.611041] lock(&xa->xa_lock#17);
[ 1231.611044] <Interrupt>
[ 1231.611045] lock(&fence->lock);
[ 1231.611047]
*** DEADLOCK ***
In this example, CPU0 would be any function accessing job->dependencies
through the xa_* functions that don't disable interrupts (eg:
drm_sched_job_add_dependency(), drm_sched_entity_kill_jobs_cb()).
CPU1 is executing drm_sched_entity_kill_jobs_cb() as a fence signalling
callback so in an interrupt context. It will deadlock when trying to
grab the xa_lock which is already held by CPU0.
Replacing all xa_* usage by their xa_*_irq counterparts would fix
this issue, but Christian pointed out another issue: dma_fence_signal
takes fence.lock and so does dma_fence_add_callback.
dma_fence_signal() // locks f1.lock
-> drm_sched_entity_kill_jobs_cb()
-> foreach dependencies
-> dma_fence_add_callback() // locks f2.lock
This will deadlock if f1 and f2 share the same spinlock.
To fix both issues, the code iterating on dependencies and re-arming them
is moved out to drm_sched_entity_kill_jobs_work().
Cc: stable@vger.kernel.org # v6.2+
Fixes: 2fdb8a8f07 ("drm/scheduler: rework entity flush, kill and fini")
Link: https://gitlab.freedesktop.org/mesa/mesa/-/issues/13908
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
[phasta: commit message nits]
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20251104095358.15092-1-pierre-eric.pelloux-prayer@amd.com
For S3 on vangogh, PMFW needs to be notified before the
driver powers down RLC. This already happens in smu_disable_dpms()
so drop the superfluous call in amdgpu_device_suspend().
Co-developed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 960e30a61e)
[Why & How]
This fixes the black screen issue on certain APUs with HDMI,
accompanied by the following messages:
amdgpu 0000:c4:00.0: amdgpu: [drm] Failed to setup vendor info
frame on connector DP-1: -22
amdgpu 0000:c4:00.0: [drm] Cannot find any crtc or sizes [drm]
Cannot find any crtc or sizes
Fixes: 489f0f600c ("drm/amd/display: Fix DVI-D/HDMI adapters")
Suggested-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 678c901443)
commit 978fa2f6d0 ("drm/amd/display: Use scaling for non-native
resolutions on eDP") started using the GPU scaler hardware to scale
when a non-native resolution was picked on eDP. This scaling was done
to fill the screen instead of maintain aspect ratio.
The idea was supposed to be that if a different scaling behavior is
preferred then the compositor would request it. The not following
aspect ratio behavior however isn't desirable, so adjust it to follow
aspect ratio and still try to fill screen.
Note: This will lead to black bars in some cases for non-native
resolutions. Compositors can request the previous behavior if desired.
Fixes: 978fa2f6d0 ("drm/amd/display: Use scaling for non-native resolutions on eDP")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4538
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 825df7ff4b)
These were not set so soft recovery was inadvertantly
disabled.
Fixes: 6ac55eab4f ("drm/amdgpu: move reset support type checks into the caller")
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1972763505)
When tick values are large, the multiplication by NSEC_PER_SEC is larger
than 64 bits and results in bad conversions.
The issue is seen in PMU busyness counters that look like they have
wrapped around due to bad conversion. i915 PMU implementation returns
monotonically increasing counters. If a count is lesser than previous
one, it will only return the larger value until the smaller value
catches up. The user will see this as zero delta between two
measurements even though the engines are busy.
Fix it by using mul_u64_u32_div()
Fixes: 77cdd054dd ("drm/i915/pmu: Connect engine busyness stats from GuC to pmu")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14955
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://lore.kernel.org/r/20251016000350.1152382-2-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 2ada9cb1df)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo: Added the Fixes tag while cherry-picking to fixes]
This is the new API for allocating DRM bridges.
This conversion was missed during the initial conversion of all bridges to
the new API. Thus all kernels with commit 94d50c1a2c ("drm/bridge:
get/put the bridge reference in drm_bridge_attach/detach()") and using this
driver now warn due to drm_bridge_attach() incrementing the refcount, which
is not initialized without using devm_drm_bridge_alloc() for allocation.
To make the conversion simple and straightforward without messing up with
the drmm_simple_encoder_alloc(), move the struct drm_bridge from struct
imx_parallel_display_encoder to struct imx_parallel_display.
Also remove the 'struct imx_parallel_display *pd' from struct
imx_parallel_display_encoder, not needed anymore.
Fixes: 94d50c1a2c ("drm/bridge: get/put the bridge reference in drm_bridge_attach/detach()")
Reported-by: Ernest Van Hoecke <ernestvanhoecke@gmail.com>
Closes: https://lore.kernel.org/all/hlf4wdopapxnh4rekl5s3kvoi6egaga3lrjfbx6r223ar3txri@3ik53xw5idyh/
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Tested-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Link: https://patch.msgid.link/20251014-drm-bridge-alloc-imx-ipuv3-v1-1-a1bb1dcbff50@bootlin.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
