When a symbol is selected that has extra dependencies,
anything that selects it must have the same dependencies.
With the added CONFIG_DRM reference from I2C_HID_CORE,
this broke a couple of drivers that now also depend
on DRM:
WARNING: unmet direct dependencies detected for I2C_HID_CORE
Depends on [m]: HID_SUPPORT [=y] && I2C_HID [=y] && (DRM [=m] || !DRM [=m])
Selected by [y]:
- I2C_HID_OF [=y] && HID_SUPPORT [=y] && I2C_HID [=y]
- I2C_HID_ACPI [=y] && HID_SUPPORT [=y] && I2C_HID [=y] && ACPI [=y]
- I2C_HID_OF_GOODIX [=y] && HID_SUPPORT [=y] && I2C_HID [=y] && OF [=y]
x86_64-linux-ld: vmlinux.o: in function `i2c_hid_core_remove':
(.text+0xfc8826): undefined reference to `drm_panel_remove_follower'
x86_64-linux-ld: vmlinux.o: in function `i2c_hid_core_probe':
(.text+0xfc8da0): undefined reference to `drm_is_panel_follower'
Add the corresponding DRM||!DRM dependencies on each one that
is affected.
Fixes: 96a37bfd23 ("HID: i2c-hid: Support being a panel follower")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230802124947.1355415-1-arnd@kernel.org
As talked about in the patch ("drm/panel: Add a way for other devices
to follow panel state"), we really want to keep the power states of a
touchscreen and the panel it's attached to in sync with each other. In
that spirit, add support to i2c-hid to be a panel follower. This will
let the i2c-hid driver get informed when the panel is powered on and
off. From there we can match the i2c-hid device's power state to that
of the panel.
NOTE: this patch specifically _doesn't_ use pm_runtime to keep track
of / manage the power state of the i2c-hid device, even though my
first instinct said that would be the way to go. Specific problems
with using pm_runtime():
* The initial power up couldn't happen in a runtime resume function
since it create sub-devices and, apparently, that's not good to do
in your resume function.
* Managing our power state with pm_runtime meant fighting to make the
right thing happen at system suspend to prevent the system from
trying to resume us only to suspend us again. While this might be
able to be solved, it added complexity.
Overall the code without pm_runtime() ended up being smaller and
easier to understand.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727101636.v4.9.Ib1a98309c455cd7e26b931c69993d4fba33bbe15@changeid
In the i2c-hid remove() function we currently try to power off,
depopulate our child device, and free our resources. That's OK, but...
* If the i2c-hid device is on a power rail that can't turn off (either
an always-on or a shared power rail) we won't try to put the device
in a low power state during remove(). This probably doesn't matter
for very many devices but it could be nice in some instances.
* If the i2c-hid device somehow manages to generate an interrupt after
we tried to power off it is conceivable that the interrupt could
arrive during or after the call to hid_destroy_device() but before
the call to free_irq(). That could cause a crash since our IRQ
handler isn't expecting it. One could imagine this happening in
the case where we couldn't turn off (see the previous bullet) or,
possibly, if the interrupt line could glitch shortly after the
device powered off.
Let's call the suspend code during remove to avoid these issues. That
will put the device into a low power state and also disable
interrupts.
Technically, one could consider this a "fix" of commit 4a200c3b9a
("HID: i2c-hid: introduce HID over i2c specification implementation").
However, since the above bullet points are more theoretical than
problems seen on real systems and since the remove() of an i2c-hid
touchscreen isn't terribly likely to be called in production, it's
probably not worth the bother of trying to backport it.
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230727101636.v4.8.Ic3ecad4a825905f4e4ce2a772b17f3c9cb2d60a2@changeid
Pull HID fixes from Benjamin Tissoires:
- AMD SFH shift-out-of-bounds fix (Basavaraj Natikar)
- avoid struct memcpy overrun warning in the hid-hyperv module (Arnd
Bergmann)
- a quick HID kselftests script fix for our CI to be happy (Benjamin
Tissoires)
- various fixes and additions of device IDs
* tag 'for-linus-2023071101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: amd_sfh: Fix for shift-out-of-bounds
HID: amd_sfh: Rename the float32 variable
HID: input: fix mapping for camera access keys
HID: logitech-hidpp: Add wired USB id for Logitech G502 Lightspeed
HID: nvidia-shield: Pack inner/related declarations in HOSTCMD reports
HID: hyperv: avoid struct memcpy overrun warning
selftests: hid: fix vmtests.sh not running make headers
Previously, support for the G502 had been attempted in commit
'27fc32fd9417 ("HID: logitech-hidpp: add USB PID for a few more supported
mice")'
This caused some issues and was reverted by
'addf3382c47c ("Revert "HID: logitech-hidpp: add USB PID for a few more
supported mice"")'.
Since then, a new version of this mouse has been released (Lightpseed
Wireless), and works correctly.
This device has support for battery reporting with the driver
Signed-off-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Link: https://lore.kernel.org/r/20230630113818.13005-1-stuart.a.hayhurst@gmail.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
A previous patch addressed the fortified memcpy warning for most
builds, but I still see this one with gcc-9:
In file included from include/linux/string.h:254,
from drivers/hid/hid-hyperv.c:8:
In function 'fortify_memcpy_chk',
inlined from 'mousevsc_on_receive' at drivers/hid/hid-hyperv.c:272:3:
include/linux/fortify-string.h:583:4: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
583 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
My guess is that the WARN_ON() itself is what confuses gcc, so it no
longer sees that there is a correct range check. Rework the code in a
way that helps readability and avoids the warning.
Fixes: 542f25a944 ("HID: hyperv: Replace one-element array with flexible-array member")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20230705140242.844167-1-arnd@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Pull drm updates from Dave Airlie:
"There is one set of patches to misc for a i915 gsc/mei proxy driver.
Otherwise it's mostly amdgpu/i915/msm, lots of hw enablement and lots
of refactoring.
core:
- replace strlcpy with strscpy
- EDID changes to support further conversion to struct drm_edid
- Move i915 DSC parameter code to common DRM helpers
- Add Colorspace functionality
aperture:
- ignore framebuffers with non-primary devices
fbdev:
- use fbdev i/o helpers
- add Kconfig options for fb_ops helpers
- use new fb io helpers directly in drivers
sysfs:
- export DRM connector ID
scheduler:
- Avoid an infinite loop
ttm:
- store function table in .rodata
- Add query for TTM mem limit
- Add NUMA awareness to pools
- Export ttm_pool_fini()
bridge:
- fsl-ldb: support i.MX6SX
- lt9211, lt9611: remove blanking packets
- tc358768: implement input bus formats, devm cleanups
- ti-snd65dsi86: implement wait_hpd_asserted
- analogix: fix endless probe loop
- samsung-dsim: support swapped clock, fix enabling, support var
clock
- display-connector: Add support for external power supply
- imx: Fix module linking
- tc358762: Support reset GPIO
panel:
- nt36523: Support Lenovo J606F
- st7703: Support Anbernic RG353V-V2
- InnoLux G070ACE-L01 support
- boe-tv101wum-nl6: Improve initialization
- sharp-ls043t1le001: Mode fixes
- simple: BOE EV121WXM-N10-1850, S6D7AA0
- Ampire AM-800480L1TMQW-T00H
- Rocktech RK043FN48H
- Starry himax83102-j02
- Starry ili9882t
amdgpu:
- add new ctx query flag to handle reset better
- add new query/set shadow buffer for rdna3
- DCN 3.2/3.1.x/3.0.x updates
- Enable DC_FP on loongarch
- PCIe fix for RDNA2
- improve DC FAMS/SubVP support for better power management
- partition support for lots of engines
- Take NUMA into account when allocating memory
- Add new DRM_AMDGPU_WERROR config parameter to help with CI
- Initial SMU13 overdrive support
- Add support for new colorspace KMS API
- W=1 fixes
amdkfd:
- Query TTM mem limit rather than hardcoding it
- GC 9.4.3 partition support
- Handle NUMA for partitions
- Add debugger interface for enabling gdb
- Add KFD event age tracking
radeon:
- Fix possible UAF
i915:
- new getparam for PXP support
- GSC/MEI proxy driver
- Meteorlake display enablement
- avoid clearing preallocated framebuffers with TTM
- implement framebuffer mmap support
- Disable sampler indirect state in bindless heap
- Enable fdinfo for GuC backends
- GuC loading and firmware table handling fixes
- Various refactors for multi-tile enablement
- Define MOCS and PAT tables for MTL
- GSC/MEI support for Meteorlake
- PMU multi-tile support
- Large driver kernel doc cleanup
- Allow VRR toggling and arbitrary refresh rates
- Support async flips on linear buffers on display ver 12+
- Expose CRTC CTM property on ILK/SNB/VLV
- New debugfs for display clock frequencies
- Hotplug refactoring
- Display refactoring
- I915_GEM_CREATE_EXT_SET_PAT for Mesa on Meteorlake
- Use large rings for compute contexts
- HuC loading for MTL
- Allow user to set cache at BO creation
- MTL powermanagement enhancements
- Switch to dedicated workqueues to stop using flush_scheduled_work()
- Move display runtime init under display/
- Remove 10bit gamma on desktop gen3 parts, they don't support it
habanalabs:
- uapi: return 0 for user queries if there was a h/w or f/w error
- Add pci health check when we lose connection with the firmware.
This can be used to distinguish between pci link down and firmware
getting stuck.
- Add more info to the error print when TPC interrupt occur.
- Firmware fixes
msm:
- Adreno A660 bindings
- SM8350 MDSS bindings fix
- Added support for DPU on sm6350 and sm6375 platforms
- Implemented tearcheck support to support vsync on SM150 and newer
platforms
- Enabled missing features (DSPP, DSC, split display) on sc8180x,
sc8280xp, sm8450
- Added support for DSI and 28nm DSI PHY on MSM8226 platform
- Added support for DSI on sm6350 and sm6375 platforms
- Added support for display controller on MSM8226 platform
- A690 GPU support
- Move cmdstream dumping out of fence signaling path
- a610 support
- Support for a6xx devices without GMU
nouveau:
- NULL ptr before deref fixes
armada:
- implement fbdev emulation as client
sun4i:
- fix mipi-dsi dotclock
- release clocks
vc4:
- rgb range toggle property
- BT601 / BT2020 HDMI support
vkms:
- convert to drmm helpers
- add reflection and rotation support
- fix rgb565 conversion
gma500:
- fix iomem access
shmobile:
- support renesas soc platform
- enable fbdev
mxsfb:
- Add support for i.MX93 LCDIF
stm:
- dsi: Use devm_ helper
- ltdc: Fix potential invalid pointer deref
renesas:
- Group drivers in renesas subdirectory to prepare for new platform
- Drop deprecated R-Car H3 ES1.x support
meson:
- Add support for MIPI DSI displays
virtio:
- add sync object support
mediatek:
- Add display binding document for MT6795"
* tag 'drm-next-2023-06-29' of git://anongit.freedesktop.org/drm/drm: (1791 commits)
drm/i915: Fix a NULL vs IS_ERR() bug
drm/i915: make i915_drm_client_fdinfo() reference conditional again
drm/i915/huc: Fix missing error code in intel_huc_init()
drm/i915/gsc: take a wakeref for the proxy-init-completion check
drm/msm/a6xx: Add A610 speedbin support
drm/msm/a6xx: Add A619_holi speedbin support
drm/msm/a6xx: Use adreno_is_aXYZ macros in speedbin matching
drm/msm/a6xx: Use "else if" in GPU speedbin rev matching
drm/msm/a6xx: Fix some A619 tunables
drm/msm/a6xx: Add A610 support
drm/msm/a6xx: Add support for A619_holi
drm/msm/adreno: Disable has_cached_coherent in GMU wrapper configurations
drm/msm/a6xx: Introduce GMU wrapper support
drm/msm/a6xx: Move CX GMU power counter enablement to hw_init
drm/msm/a6xx: Extend and explain UBWC config
drm/msm/a6xx: Remove both GBIF and RBBM GBIF halt on hw init
drm/msm/a6xx: Add a helper for software-resetting the GPU
drm/msm/a6xx: Improve a6xx_bus_clear_pending_transactions()
drm/msm/a6xx: Move a6xx_bus_clear_pending_transactions to a6xx_gpu
drm/msm/a6xx: Move force keepalive vote removal to a6xx_gmu_force_off()
...
The hidraw_open() function increments the hidraw device reference
counter. The counter has no dedicated synchronization mechanism,
resulting in a potential data race when concurrently opening a device.
The race is a regression introduced by commit 8590222e4b ("HID:
hidraw: Replace hidraw device table mutex with a rwsem"). While
minors_rwsem is intended to protect the hidraw_table itself, by instead
acquiring the lock for writing, the reference counter is also protected.
This is symmetrical to hidraw_release().
Link: https://github.com/systemd/systemd/issues/27947
Fixes: 8590222e4b ("HID: hidraw: Replace hidraw device table mutex with a rwsem")
Cc: stable@vger.kernel.org
Signed-off-by: Ludvig Michaelsson <ludvig.michaelsson@yubico.com>
Link: https://lore.kernel.org/r/20230621-hidraw-race-v1-1-a58e6ac69bab@yubico.com
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
HP Elite Presenter Mouse HID Record Descriptor shows
two mouses (Repord ID 0x1 and 0x2), one keypad (Report ID 0x5),
two Consumer Controls (Report IDs 0x6 and 0x3).
Previous to this commit it registers one mouse, one keypad
and one Consumer Control, and it was usable only as a
digitl laser pointer (one of the two mouses). This patch defines
the 464a USB device ID and enables the HID_QUIRK_MULTI_INPUT
quirk for it, allowing to use the device both as a mouse
and a digital laser pointer.
Signed-off-by: Marco Morandini <marco.morandini@polimi.it>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Expose the 2017 SHIELD controller (Thunderstrike) LED through the kernel
LED API.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Supports the Thunderstrike (SHIELD 2017) controller. Implements support for
the Thunderstrike HOSTCMD firmware interface. Adds sysfs attributes about a
SHIELD device and introduces haptics support for controllers.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
On the Keychron K8 keyboard, and probably others, the right side keys
should not be swapped to maintain PC layout.
Swapping the right side keys moves 'Super' before 'Alt gr' which is not
intended by the default Keychron layout or the ISO layout.
Signed-off-by: Lasse Brun <bruners@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
While KUnit tests that cannot be built as a loadable module must depend
on "KUNIT=y", this is not true for modular tests, where it adds an
unnecessary limitation.
Fix this by relaxing the dependency to "KUNIT".
Fixes: 08809e482a ("HID: uclogic: KUnit best practices and naming conventions")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The hid_check_device_match() returns true if we find a match and false
if we don't. But here it returns -ENODEV which becomes true instead
of false.
Fixes: 207733f926 ("HID: split apart hid_device_probe to make logic more apparent")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Adds the USB and Bluetooth IDs for the Logitech G915 TKL keyboard, for device detection
For this device, this provides battery reporting on top of hid-generic
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
After commit b8a1a4cd5a ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
In the beginning, commit 18eeef46d3 ("HID: i2c-hid: goodix: Tie the
reset line to true state of the regulator") introduced a change to tie
the reset line of the Goodix touchscreen to the state of the regulator
to fix a power leakage issue in suspend.
After some time, the change was deemed unnecessary and was reverted in
commit 557e05fa9f ("HID: i2c-hid: goodix: Stop tying the reset line to
the regulator") due to difficulties in managing regulator notifiers for
designs like Evoker, which provides a second power rail to touchscreen.
However, the revert caused a power regression on another Chromebook
device Steelix in the field, which has a dedicated always-on regulator
for touchscreen and was covered by the workaround in the first commit.
To address both cases, this patch adds the support for the new
"goodix,no-reset-during-suspend" property in the driver:
- When set to true, the driver does not assert the reset GPIO during
power-down.
Instead, the GPIO will be asserted during power-up to ensure the
touchscreen always has a clean start and consistent behavior after
resuming.
This is for designs with a dedicated always-on regulator.
- When set to false or unset, the driver uses the original control flow
and asserts GPIO and disables regulators normally.
This is for the two-regulator and shared-regulator designs.
Signed-off-by: Fei Shao <fshao@chromium.org>
Suggested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Currently, rumble is only supported via bluetooth on a single xbox
controller, called 'model 1708'. On the back of the device, it's named
'wireless controller for xbox one'. However, in 2021, Microsoft released
a firmware update for this controller. As part of this update, the HID
descriptor of the device changed. The product ID was also changed from
0x02fd to 0x0b20. On this controller, rumble was supported via
hid-microsoft, which matched against the old product id (0x02fd). As a
result, the firmware update broke rumble support on this controller.
See:
https://news.xbox.com/en-us/2021/09/08/xbox-controller-firmware-update-rolling-out-to-insiders-starting-today/
The hid-microsoft driver actually supports rumble on the new firmware,
as well. So simply adding new product id is sufficient to bring back
this support.
After discussing further with the xbox team, it was pointed out that
another xbox controller, xbox elite series 2, can be supported in a
similar way.
Add rumble support for all of these devices in this patch. Two of the
devices have received firmware updates that caused their product id's to
change. Both old and new firmware versions of these devices were tested.
The tested controllers are:
1. 'wireless controller for xbox one', model 1708
2. 'xbox wireless controller', model 1914. This is also sometimes
referred to as 'xbox series S|X'.
3. 'elite series 2', model 1797.
The tested configurations are:
1. model 1708, pid 0x02fd (old firmware)
2. model 1708, pid 0x0b20 (new firmware)
3. model 1914, pid 0x0b13
4. model 1797, pid 0x0b05 (old firmware)
5. model 1797, pid 0x0b22 (new firmware)
I verified rumble support on both bluetooth and usb.
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Siarhei Vishniakou <svv@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull HID fix from Jiri Kosina:
- Final, confirmed fix for regression causing some devices connected
via Logitech HID++ Unifying receiver take too long to initialize
(Benjamin Tissoires)
* tag 'for-linus-2023060501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: hidpp: terminate retry loop on success
It seems we forgot the normal case to terminate the retry loop,
making us asking 3 times each command, which is probably a little bit
too much.
And remove the ugly "goto exit" that can be replaced by a simpler "break"
Fixes: 586e8fede7 ("HID: logitech-hidpp: Retry commands when device is busy")
Suggested-by: Mark Lord <mlord@pobox.com>
Tested-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull HID fixes from Jiri Kosina:
- Regression fix for overlong long timeouts during initialization on
some Logitech Unifying devices (Bastien Nocera)
- error handling and overflow fixes for Wacom driver (Denis Arefev,
Jason Gerecke, Nikita Zhandarovich)
* tag 'for-linus-2023060101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: logitech-hidpp: Handle timeout differently from busy
HID: wacom: Add error check to wacom_parse_and_register()
HID: google: add jewel USB id
HID: wacom: avoid integer overflow in wacom_intuos_inout()
HID: wacom: Check for string overflow from strscpy calls
If an attempt at contacting a receiver or a device fails because the
receiver or device never responds, don't restart the communication, only
restart it if the receiver or device answers that it's busy, as originally
intended.
This was the behaviour on communication timeout before commit 586e8fede7
("HID: logitech-hidpp: Retry commands when device is busy").
This fixes some overly long waits in a critical path on boot, when
checking whether the device is connected by getting its HID++ version.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Suggested-by: Mark Lord <mlord@pobox.com>
Fixes: 586e8fede7 ("HID: logitech-hidpp: Retry commands when device is busy")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217412
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
More and more drivers rely on devres to manage their resources, however
if bus' probe() and release() methods are not trivial and control some
of resources as well (for example enable or disable clocks, or attach
device to a power domain), we need to make sure that driver-allocated
resources are released immediately after driver's remove() method
returns, and not postponed until driver core gets around to releasing
resources.
In case of HID we should not try to close the report and release
associated memory until after all devres callbacks are executed. To fix
that we open a new devres group before calling driver's probe() and
explicitly release it when we return from driver's remove().
This is similar to what we did for I2C bus in commit 5b5475826c ("i2c:
ensure timely release of driver-allocated resources"). It is tempting to
try and move this into driver core, but actually doing so is challenging,
we need to split bus' remove() method into pre- and post-remove methods,
which would make the logic even less clear.
Reported-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20230505232417.1377393-1-swboyd@chromium.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
hid_device_probe() has a complex flow and locks and unlocks a mutex.
Move the most of the logic into __hid_device_probe() and
hid_check_device_match() and leave the locking in hid_device_probe()
which makes the code more clear.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Sensors are enabled independently of HID device initialization. Sensor
initialization should be kept separate in this case, while HID devices
should be initialized according to the sensor state. Hence split sensor
initialization and HID initialization for SFH1.1 into separate blocks.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
A duplicate cleanup is performed that is not necessary. As a result,
remove duplicate cleanup and use common cleanup.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Sensors are enabled independently of HID device initialization. Sensor
initialization should be kept separate in this case, while HID devices
should be initialized according to the sensor state. Hence split sensor
initialization and HID initialization into separate blocks.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
A number of duplicate cleanups are performed that are not necessary. As a
result, remove duplicate cleanups and use common cleanup.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
