Pull char / misc / IIO / and others driver updates from Greg KH:
"Here is the char/misc/iio and other smaller driver subsystem updates
for 7.1-rc1. Lots of stuff in here, all tiny, but relevant for the
different drivers they touch. Major points in here is:
- the usual large set of new IIO drivers and updates for that
subsystem (the large majority of this diffstat)
- lots of comedi driver updates and bugfixes
- coresight driver updates
- interconnect driver updates and additions
- mei driver updates
- binder (both rust and C versions) updates and fixes
- lots of other smaller driver subsystem updates and additions
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (405 commits)
coresight: tpdm: fix invalid MMIO access issue
mei: me: add nova lake point H DID
mei: lb: add late binding version 2
mei: bus: add mei_cldev_uuid
w1: ds2490: drop redundant device reference
bus: mhi: host: pci_generic: Add Telit FE912C04 modem support
mei: csc: wake device while reading firmware status
mei: csc: support controller with separate PCI device
mei: convert PCI error to common errno
mei: trace: print return value of pci_cfg_read
mei: me: move trace into firmware status read
mei: fix idle print specifiers
mei: me: use PCI_DEVICE_DATA macro
sonypi: Convert ACPI driver to a platform one
misc: apds990x: fix all kernel-doc warnings
most: usb: Use kzalloc_objs for endpoint address array
hpet: Convert ACPI driver to a platform one
misc: vmw_vmci: Fix spelling mistakes in comments
parport: Remove completed item from to-do list
char: remove unnecessary module_init/exit functions
...
Pull more drm fixes from Dave Airlie:
"These are the regular fixes that have built up over last couple of
weeks, all pretty minor and spread all over.
atomic:
- raise the vblank timeout to avoid it on virtual drivers
- fix colorop duplication
bridge:
- stm_lvds: state check fix
- dw-mipi-dsi: bridge reference leak fix
panel:
- visionx-rm69299: init fix
dma-fence:
- fix sparse warning
dma-buf:
- UAF fix
panthor:
- mapping fix
arcgpu:
- device_node reference leak fix
nouveau:
- memory leak in error path fix
- overflow in reloc path for old hw fix
hv:
- Kconfig fix
v3d:
- infinite loop fix"
* tag 'drm-fixes-2026-04-24' of https://gitlab.freedesktop.org/drm/kernel:
drm/nouveau: fix u32 overflow in pushbuf reloc bounds check
MAINTAINERS: split hisilicon maintenance and add Yongbang Shi for hibmc-drm matainers
drm/v3d: Reject empty multisync extension to prevent infinite loop
drm/panel: visionox-rm69299: Make use of prepare_prev_first
drm/drm_atomic: duplicate colorop states if plane color pipeline in use
drm/nouveau: fix nvkm_device leak on aperture removal failure
hv: Select CONFIG_SYSFB only for CONFIG_HYPERV_VMBUS
dma-fence: Silence sparse warning in dma_fence_describe
drm/bridge: dw-mipi-dsi: Fix bridge leak when host attach fails
drm/arcpgu: fix device node leak
drm/panthor: Fix outdated function documentation
drm/panthor: Extend VM locked region for remap case to be a superset
dma-buf: fix UAF in dma_buf_put() tracepoint
drm/bridge: stm_lvds: Do not fail atomic_check on disabled connector
drm/atomic: Increase timeout in drm_atomic_helper_wait_for_vblanks()
This week in drm-misc-fixes, we have:
- A patch to raise the vblank timeout to avoid it on virtual drivers
- a state check fix for stm_lvds
- a use-after-free fix for dma-buf
- a mapping fix for panthor
- a device_node reference leak fix for arcgpu
- a bridge reference leak fix for dw-mipi-dsi
- a sparse warning fix for dma-fence
- a kconfig fix for hv
- a memory leak fix for nouveau
- a fix to duplicate colorop when duplicating states
- a panel initialisation order fix for visionox-rm69299
- a fix to prevent an infinite loop for v3d
- an overflow fix for nouveau
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patch.msgid.link/20260423-realistic-eager-reindeer-4dacf7@houat
For suspend/resume to work correctly, do for colorop state the same we
do for plane/crtc/connector states: duplicate the state of colorops in a
color pipeline if it's in use by a given plane when suspending and
restore cached colorop states when resuming. While at it, prevent
unused-variable warning when using for_each_new_colorop_in_stage here.
Fixes: 2afc3184f3 ("drm/plane: Add COLOR PIPELINE property")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Melissa Wen <mwen@igalia.com>
Link: https://patch.msgid.link/20260318163629.300627-1-mwen@igalia.com
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
This is an initial port of the TTM pools for
write combined and uncached pages to use the list_lru.
This makes the pool's more NUMA aware and avoids
needing separate NUMA pools (later commit enables this).
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The second Late Binding version allows to send payload bigger
than client MTU by splitting it to chunks and uses separate
firmware client for transfer.
The component interface is unchanged and driver doing all splitting.
Only one Late Binding version is supported by firmware.
When Late binding version 2 is supported, the new client is advertised
by firmware and existing MKHI will have version 2.
This helps driver to select the right mode of work.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Link: https://patch.msgid.link/20260405112326.1535208-3-alexander.usyskin@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Parse the AMD VSDB v3 from CTA extension blocks and store the result
in struct drm_amd_vsdb_info, a new field of drm_display_info. This
includes replay mode, panel type, and luminance ranges.
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Changes for v7.1
CI:
- Uprev mesa
- Restore CI jobs for Qualcomm APQ8016 and APQ8096 devices
Core:
- Switched to of_get_available_child_by_name()
DPU:
- Fixes for DSC panels
- Fixed brownout because of the frequency / OPP mismatch
- Quad pipe preparation (not enabled yet)
- Switched to virtual planes by default
- Dropped VBIF_NRT support
- Added support for Eliza platform
- Reworked alpha handling
- Switched to correct CWB definitions on Eliza
- Dropped dummy INTF_0 on MSM8953
- Corrected INTFs related to DP-MST
DP:
- Removed debug prints looking into PHY internals
DSI:
- Fixes for DSC panels
- RGB101010 support
- Support for SC8280XP
- Moved PHY bindings from display/ to phy/
GPU:
- Preemption support for x2-85 and a840
- IFPC support for a840
- SKU detection support for x2-85 and a840
- Expose AQE support (VK ray-pipeline)
- Avoid locking in VM_BIND fence signaling path
- Fix to avoid reclaim in GPU snapshot path
- Disallow foreign mapping of _NO_SHARE BOs
- Couple a6xx gpu snapshot fixes
- Various other fixes
HDMI:
- Fixed infoframes programming
MDP5:
- Dropped support for MSM8974v1
- Dropped now unused code for MSM8974 v1 and SDM660 / MSM8998
Also misc small fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <rob.clark@oss.qualcomm.com>
Link: https://patch.msgid.link/CACSVV012vn73BaUfk=Hw4WkQHZNPHiqfifWEunAqMc2EGOWUEQ@mail.gmail.com
drm/i915 feature pull #2 for v7.1:
Refactoring and cleanups:
- Refactor LT PHY PLL handling to use the DPLL framework (Mika)
- Implement display register polling and waits in display code (Ville)
- Move PCH clock gating in display PCH file (Luca)
- Add shared stepping info header for i915 and display (Jani)
- Clean up GVT I2C command decoding (Jonathan)
- NV12 plane unlinking cleanups (Ville)
- Clean up NV12 DDB/watermark handling for pre-ICL platforms (Ville)
Fixes:
- An assortment of DSI fixes (Ville)
- Handle PORT_NONE in assert_port_valid() (Jonathan)
- Fix link failure without FBDEV emulation (Arnd Bergmann)
- Quirk disable panel replay on certain Dell XPS models (Jouni)
- Check if VESA DPCD AUX backlight is possible (Suraj)
Other:
- Mailmap update for Christoph (Christoph)
Signed-off-by: Dave Airlie <airlied@redhat.com>
# Conflicts:
# drivers/gpu/drm/i915/display/intel_plane.c
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/ac9dfdb745d5a67c519ea150a6f36f8f74b8760e@intel.com
drm-misc-next for v7.1:
UAPI Changes:
amdxdna:
- support per-BO memory-usage queries
docs:
- Improve UAPI documentation
panthor:
- extend timestamp query with flags
Core Changes:
edid:
- provide enum drm_output_color_format; mass-convert drivers
gem-dma:
- use drm_dev_dma_dev() for DMA mappings
- set VM_DONTDUMP on mmap
mipi-dbi:
- drop simple-display; mass-convert drivers
prime:
- use drm_dev_dma_dev() for DMA mappings
ttm:
- improve handling of gfp_retry_mayfail
Driver Changes:
amdgpu:
- use atomic_create_state for private_obj
amdxdna:
- refactor GEM implementation
- fixes
bridge:
- provide clear-and-put helper for reliable cleanup
- analogix_dp: Use DP helpers for link training
- lontium-lt8713sx: Fix 64-bit division and Kconfig
- samsung-dsim: Use clear-and-put
imagination:
- improve power-off sequence
- support context-reset notification from firmware
komeda:
- support Arm China Linlon D6 plus DT bindings
mediatek:
- use drm_dev_dma_dev() for DMA mappings
panel:
- support Himax HX83121A plus DT bindings
- support JuTouch JT070TM041 plus DT bindings
- support Samsung S6E8FC0 plus DT bindings
- himax-hx83102c: support Samsung S6E8FC0 plus DT bindings; support backlight
- ili9806e: support Rocktech RK050HR345-CT106A plus DT bindings
- simple: support Tianma TM050RDH03 plus DT bindings
panthor:
- support various sources for timestamp queries
- fixes
omapdrm:
- use atomic_create_state for private_obj
rcar-du:
- fix suspend/resume wrt VSP interface
- fix leak of device_link
- clean up
sun4i:
- use drm_dev_dma_dev() for DMA mappings
tegra:
- use atomic_create_state for private_obj
xe:
- send 'none' recovery method for XE_WEDGED_MODE_UPON_ANY_HANG_NO_RESET
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260326151812.GA76082@linux.fritz.box
Deprecate simple-encoder and simple-display-pipe helpers in favor of
regular atomic helpers. Remove the related documentation. Add TODO
item for converting the remaining drivers.
These helpers have been deprecated for years and many drivers have
been updated to not use them. Still there are a few left and we
occasionally receive new drivers build upon them. Marking them as
deprecated will hopefully resolve these problems. The TODO items
should be easy enough for getting new voluteers started on DRM driver
development.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: David Lechner <david@lechnology.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260319160110.109610-17-tzimmermann@suse.de
Refactor the existing simple-display callbacks such that they invoke
helpers compatible with regular atomic modesetting. Allows for adding
mipi-dbi drives that do not require simple-display helpers.
Provide initializer macro for elements of the regular modesetting
pipeline. These will be used by drivers to integrate mipi-dbi helpers.
Also provide initializer macros for the plane formats.
As the new helpers are DRM functions, add the drm_ prefix. Mipi-dbi
interfaces currently lack this.
v3:
- fix uninitialized variable (David)
- document public interfaces (David)
- mention format macros in commit message (David)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: David Lechner <david@lechnology.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260319160110.109610-4-tzimmermann@suse.de
Use drm_atomic_helper_commit_tail_rpm() as commit tail to update the
plane after enabling the CRTC. Then remove the plane-update code from
mipi_dbi_enable_flush() and inline the remaining backlight code where
necessary.
Mipi-dbi's current commit tail drm_atomic_helper_commit_tail() first
updates the plane and then enables the CRTC. But the CRTC enablement
includes power management that prevents the initial plane update from
working. Hence, each mipi-dbi driver includes a plane update in their
CRTC enablement; in the form of mipi_dbi_enable_flush() or custom code.
Using drm_atomic_helper_commit_tail_rpm() enables the CRTC before any
plane updates. Hence the additional plane update can be removed from
mipi_dbi_enable_flush() and a number of drivers.
This leaves backlight_enable() in the helper, which can now be inlined
into affected drivers. Drivers now enable the CRTC plus an optional
backlight and then automatically update the plane.
In the case of disabling the display, drm_atomic_helper_commit_tail_rpm()
only disables the CRTC without touching the plane at all. Mipi-dbi's
mipi_dbi_pipe_disable() already contains the necessary logic.
Removing the plane update from the CRTC enablement will also help with
converting mipi-dbi from simple-pipe helpers to regular atomic helpers.
v3:
- st7586: remove unused variable
v2:
- ili9225: remove unused variables (David)
- st7586: remove unused variables (David)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: David Lechner <david@lechnology.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260319160110.109610-2-tzimmermann@suse.de
The hdmi_colorspace enum was defined to represent the colorspace value
of the HDMI infoframes. It was later used by some HDMI drivers to
express the output format they should be setting up.
During the introduction of the HDMI helpers, it then was used to
represent it in the drm_connector_hdmi_state structure.
However, it's always been somewhat redundant with the DRM_COLOR_FORMAT_*
defines, and now with the drm_output_color_format enum. Let's
consolidate around drm_output_color_format in drm_connector_hdmi_state
to facilitate the current effort to provide a global output format
selection mechanism.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260305-drm-rework-color-formats-v3-14-f3935f6db579@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The EDID parsing code initially introduced the DRM_COLOR_FORMAT_*
defines to represent the sink capabilities. Since a given sink could
support multiple formats, it was first defined as a bitmask.
However, the core and drivers have since leveraged those defines to
represent both the supported formats but also the current format being
used.
Considering the latter case, the more natural, and consistent, thing to
do would be to create an enum of all the possible formats, and then list
the supported formats using a bitmask of the individual enum values.
Let's create a new enum following that pattern, drm_output_color_format,
while maintaining the DRM_COLOR_FORMAT_* compatibility to make the
transition easier.
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260305-drm-rework-color-formats-v3-1-f3935f6db579@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Our xe-vfio-pci component relies on the confirmation from the PF
that VF FLR processing has finished, but due to the notification
latency on the HW/FW side, PF might be unaware yet of the already
triggered VF FLR.
Update VF state machine with new FLR_PREPARE state that indicate
imminent VF FLR notification and treat that as a begin of the FLR
sequence. Also introduce function that xe-vfio-pci should call to
guarantee correct synchronization.
v2: move PREPARE into WIP, update commit msg (Michal)
Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Co-developed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patch.msgid.link/20260309152449.910636-2-piotr.piorkowski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
drm-misc-next for v7.1:
UAPI Changes:
math:
- provide __KERNEL_DIV_ROUND_CLOSEST() in UAPI
mode:
- provide DRM_ARGB_GET*() macros for reading color components
Cross-subsystem Changes:
math:
- implement DIV_ROUND_CLOSEST() with __KERNEL_DIV_ROUND_CLOSEST()
Core Changes:
atomic:
- fix handling of colorop state in atomic updates
- provide CRTC background color
ttm:
- improve tests and doumentation
Driver Changes:
amdxdna:
- allow forcing DMA through IOMMU IOVA
- improve debugging
bridge:
- Support Lontium LT8713SX DP MST bridge plus DT bindings
imx:
- support planes behind the primary plane
- fix bus-format selection
ivpu:
- perform engine reset on TDR error
panel:
- novatek-nt36672a: Use mipi_dsi_*_multi() functions
- panel-edp: Support BOE NV153WUM-N42, CMN N153JCA-ELK, CSW MNF307QS3-2
renesas:
- rz-du: clean up
rockchip:
- support CRTC background color
sun4i:
- fix leak in init code
- clean up
tildc
- clean up
v3d:
- improve handling of struct v3d_stats
- improve error handling
- clean up
vkms:
- support CRTC background color
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260320082604.GA17867@linux.fritz.box
Drivers having a struct drm_bridge pointer pointing to a bridge in many
cases hold that reference until the owning device is removed. In those
cases the reference to the bridge can be put in the .remove callback
(possibly using devm actions) or in the .destroy func (possibly with the
help of struct drm_bridge::next_bridge). At those moments the driver should
not be operating anymore and won't dereference the bridge pointer after it
is put.
However there are cases when drivers need to stop holding a reference to a
bridge even when their device is not being removed. This is the case for
bridge hot-unplug, when a bridge is removed but the previous entity (bridge
or encoder) is staying. In such case the "previous entity" needs to put it
but cannot do it via devm or .destroy, because it is not being removed.
The easy way to dispose of such pointer is:
drm_bridge_put(my_priv->some_bridge);
my_priv->some_bridge = NULL;
However this is risky because there is a time window between the two lines
where the reference is put, and thus the bridge could be deallocated, but
the pointer is still assigned. If other functions of the same driver were
invoked concurrently they might dereference my_priv->some_bridge during
that window, resulting in use-after-free.
A correct solution is to clear the pointer before putting the reference,
but that needs a temporary variable:
struct drm_bridge *temp = my_priv->some_bridge;
my_priv->some_bridge = NULL;
drm_bridge_put(temp);
This solution is however annoying to write, so the incorrect version might
still sneak in.
Add a simple, easy to use function to put a bridge after setting its
pointer to NULL in the correct way.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260310-drm-bridge-atomic-vs-remove-clear_and_put-v2-1-51fe222f3cf0@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Some display controllers can be hardware programmed to show non-black
colors for pixels that are either not covered by any plane or are
exposed through transparent regions of higher planes. This feature can
help reduce memory bandwidth usage, e.g. in compositors managing a UI
with a solid background color while using smaller planes to render the
remaining content.
To support this capability, introduce the BACKGROUND_COLOR standard DRM
mode property, which can be attached to a CRTC through the
drm_crtc_attach_background_color_property() helper function.
Additionally, define a 64-bit ARGB format value to be built with the
help of a couple of dedicated DRM_ARGB64_PREP*() helpers. Individual
color components can be extracted with desired precision using the
corresponding DRM_ARGB64_GET*() macros.
Co-developed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Diederik de Haas <diederik@cknow-tech.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://patch.msgid.link/20260303-rk3588-bgcolor-v8-2-fee377037ad1@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
Continue i915 and xe separation from display by moving the bo calls to
the display parent interface. Instead of adding all these functions to
intel_parent.[ch], reuse the now vacated intel_bo.[ch], and avoid mass
renames to calls of these functions. This is similar to
intel_display_rpm.[ch].
Make many of the hooks optional to avoid having to implement dummy
functions in xe. Indeed now we can remove many of the existing dummy
functions.
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/7899eef2ccf0cd603df69099df065226a0df917b.1773238670.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
amd-drm-next-7.1-2026-03-12:
amdgpu:
- SMU13 fix
- SMU14 fix
- Fixes for bring up hw testing
- Kerneldoc fix
- GC12 idle power fix for compute workloads
- DCCG fixes
- UserQ fixes
- Move test for fbdev object to a generic helper
- GC 12.1 updates
- Use struct drm_edid in non-DC code
- Include IP discovery data in devcoredump
- SMU 13.x updates
- Misc cleanups
- DML 2.1 fixes
- Enable NV12/P010 support on primary planes
- Enable color encoding and color range on overlay planes
- DC underflow fixes
- HWSS fast path fixes
- Replay fixes
- DCN 4.2 updates
- Support newer IP discovery tables
- LSDMA 7.1 support
- IH 7.1 fixes
- SoC v1 updates
- GC12.1 updates
- PSP 15 updates
- XGMI fixes
- GPUVM locking fix
amdkfd:
- Fix missing BO unreserve in an error path
radeon:
- Move test for fbdev object to a generic helper
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patch.msgid.link/20260312184425.3875669-1-alexander.deucher@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
Requested by Maxime Ripard for drm-misc-next because renesas people need
fb797a7010 ("drm: renesas: rz-du: mipi_dsi: Set DSI divider").
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
Move the get/put/ref/flush_for_display calls to the display parent
interface.
For i915, move the hooks next to the other i915 core frontbuffer code in
i915_gem_object_frontbuffer.c. For xe, add new file xe_frontbuffer.c for
the same.
Note: The intel_frontbuffer_flush() calls from
i915_gem_object_frontbuffer.c will partially route back to i915 core via
the parent interface. This is less than stellar.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://patch.msgid.link/f69b967ed82bbcfd60ffa77ba197b26a1399f09f.1772475391.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Provide a generic helper that tests if fbdev emulation is backed by
a specific GEM object. Not all drivers use client buffers (yet), hence
also test against the first GEM object in the fbdev framebuffer.
Convert amdgpu. The helper will also be useful for radeon.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Introduces the DRM RAS infrastructure over generic netlink.
The new interface allows drivers to expose RAS nodes and their
associated error counters to userspace in a structured and extensible
way. Each drm_ras node can register its own set of error counters, which
are then discoverable and queryable through netlink operations. This
lays the groundwork for reporting and managing hardware error states
in a unified manner across different DRM drivers.
Currently it only supports error-counter nodes. But it can be
extended later.
The registration is also not tied to any drm node, so it can be
used by accel devices as well.
It uses the new and mandatory YAML description format stored in
Documentation/netlink/specs/. This forces a single generic netlink
family namespace for the entire drm: "drm-ras".
But multiple-endpoints are supported within the single family.
Any modification to this API needs to be applied to
Documentation/netlink/specs/drm_ras.yaml before regenerating the
code:
$ tools/net/ynl/pyynl/ynl_gen_c.py --spec \
Documentation/netlink/specs/drm_ras.yaml --mode uapi --header \
-o include/uapi/drm/drm_ras.h
$ tools/net/ynl/pyynl/ynl_gen_c.py --spec \
Documentation/netlink/specs/drm_ras.yaml --mode kernel \
--header -o drivers/gpu/drm/drm_ras_nl.h
$ tools/net/ynl/pyynl/ynl_gen_c.py --spec \
Documentation/netlink/specs/drm_ras.yaml \
--mode kernel --source -o drivers/gpu/drm/drm_ras_nl.c
Cc: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Cc: Lijo Lazar <lijo.lazar@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: netdev@vger.kernel.org
Co-developed-by: Aravind Iddamsetty <aravind.iddamsetty@linux.intel.com>
Signed-off-by: Aravind Iddamsetty <aravind.iddamsetty@linux.intel.com>
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Zack McKevitt <zachary.mckevitt@oss.qualcomm.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/20260304074412.464435-8-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
