Add cases to check minimum and maximum MTU which are exposed via
"ip -d link show". Test configuration and traffic. Use VLAN devices as
usually VLAN header (4 bytes) is not included in the MTU, and drivers
should configure hardware correctly to send maximum MTU payload size
in VLAN tagged packets.
$ ./min_max_mtu.sh
TEST: ping [ OK ]
TEST: ping6 [ OK ]
TEST: Test maximum MTU configuration [ OK ]
TEST: Test traffic, packet size is maximum MTU [ OK ]
TEST: Test minimum MTU configuration [ OK ]
TEST: Test traffic, packet size is minimum MTU [ OK ]
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/89de8be8989db7a97f3b39e3c9da695673e78d2e.1718275854.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth and netfilter.
Slim pickings this time, probably a combination of summer, DevConf.cz,
and the end of first half of the year at corporations.
Current release - regressions:
- Revert "igc: fix a log entry using uninitialized netdev", it traded
lack of netdev name in a printk() for a crash
Previous releases - regressions:
- Bluetooth: L2CAP: fix rejecting L2CAP_CONN_PARAM_UPDATE_REQ
- geneve: fix incorrectly setting lengths of inner headers in the
skb, confusing the drivers and causing mangled packets
- sched: initialize noop_qdisc owner to avoid false-positive
recursion detection (recursing on CPU 0), which bubbles up to user
space as a sendmsg() error, while noop_qdisc should silently drop
- netdevsim: fix backwards compatibility in nsim_get_iflink()
Previous releases - always broken:
- netfilter: ipset: fix race between namespace cleanup and gc in the
list:set type"
* tag 'net-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (35 commits)
bnxt_en: Adjust logging of firmware messages in case of released token in __hwrm_send()
af_unix: Read with MSG_PEEK loops if the first unread byte is OOB
bnxt_en: Cap the size of HWRM_PORT_PHY_QCFG forwarded response
gve: Clear napi->skb before dev_kfree_skb_any()
ionic: fix use after netif_napi_del()
Revert "igc: fix a log entry using uninitialized netdev"
net: bridge: mst: fix suspicious rcu usage in br_mst_set_state
net: bridge: mst: pass vlan group directly to br_mst_vlan_set_state
net/ipv6: Fix the RT cache flush via sysctl using a previous delay
net: stmmac: replace priv->speed with the portTransmitRate from the tc-cbs parameters
gve: ignore nonrelevant GSO type bits when processing TSO headers
net: pse-pd: Use EOPNOTSUPP error code instead of ENOTSUPP
netfilter: Use flowlabel flow key when re-routing mangled packets
netfilter: ipset: Fix race between namespace cleanup and gc in the list:set type
netfilter: nft_inner: validate mandatory meta and payload
tcp: use signed arithmetic in tcp_rtx_probe0_timed_out()
mailmap: map Geliang's new email address
mptcp: pm: update add_addr counters after connect
mptcp: pm: inc RmAddr MIB counter once per RM_ADDR ID
mptcp: ensure snd_una is properly initialized on connect
...
The helper setup_ns() doesn't work when a net namespace named "ns" is
passed to it.
For example, in net/mptcp/diag.sh, the name of the namespace is "ns". If
"setup_ns ns" is used in it, diag.sh fails with errors:
Invalid netns name "./mptcp_connect"
Cannot open network namespace "10000": No such file or directory
Cannot open network namespace "10000": No such file or directory
That is because "ns" is also a local variable in setup_ns, and it will
not set the value for the global variable that has been giving in
argument. To solve this, we could rename the variable, but it sounds
better to drop it, as we can resolve the name using the variable passed
in argument instead.
The other local variables -- "ns_list" and "ns_name" -- are more
unlikely to conflict with existing global variables. They don't seem to
be currently used in any other net selftests.
Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240607-upstream-net-next-20240607-selftests-mptcp-net-lib-v1-4-e36986faac94@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It sounds good to mark the global netns variable as 'readonly', but Bash
doesn't allow the creation of local variables with the same name.
Because it looks like 'readonly' is mainly used here to check if a netns
with that name has already been set, it sounds fine to check if a
variable with this name has already been set instead. By doing that, we
avoid having to modify helpers from MPTCP selftests using the same
variable name as the one used to store the created netns name.
While at it, also avoid an unnecessary call to 'eval' to set a local
variable.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240607-upstream-net-next-20240607-selftests-mptcp-net-lib-v1-3-e36986faac94@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The creation of new subflows can fail for different reasons. If no
subflow have been created using the received ADD_ADDR, the related
counters should not be updated, otherwise they will never be decremented
for events related to this ID later on.
For the moment, the number of accepted ADD_ADDR is only decremented upon
the reception of a related RM_ADDR, and only if the remote address ID is
currently being used by at least one subflow. In other words, if no
subflow can be created with the received address, the counter will not
be decremented. In this case, it is then important not to increment
pm.add_addr_accepted counter, and not to modify pm.accept_addr bit.
Note that this patch does not modify the behaviour in case of failures
later on, e.g. if the MP Join is dropped or rejected.
The "remove invalid addresses" MP Join subtest has been modified to
validate this case. The broadcast IP address is added before the "valid"
address that will be used to successfully create a subflow, and the
limit is decreased by one: without this patch, it was not possible to
create the last subflow, because:
- the broadcast address would have been accepted even if it was not
usable: the creation of a subflow to this address results in an error,
- the limit of 2 accepted ADD_ADDR would have then been reached.
Fixes: 01cacb00b3 ("mptcp: add netlink-based PM")
Cc: stable@vger.kernel.org
Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: YonglongLi <liyonglong@chinatelecom.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-3-1ab9ddfa3d00@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The RmAddr MIB counter is supposed to be incremented once when a valid
RM_ADDR has been received. Before this patch, it could have been
incremented as many times as the number of subflows connected to the
linked address ID, so it could have been 0, 1 or more than 1.
The "RmSubflow" is incremented after a local operation. In this case,
it is normal to tied it with the number of subflows that have been
actually removed.
The "remove invalid addresses" MP Join subtest has been modified to
validate this case. A broadcast IP address is now used instead: the
client will not be able to create a subflow to this address. The
consequence is that when receiving the RM_ADDR with the ID attached to
this broadcast IP address, no subflow linked to this ID will be found.
Fixes: 7a7e52e38a ("mptcp: add RM_ADDR related mibs")
Cc: stable@vger.kernel.org
Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: YonglongLi <liyonglong@chinatelecom.cn>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240607-upstream-net-20240607-misc-fixes-v1-2-1ab9ddfa3d00@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-06-06
We've added 54 non-merge commits during the last 10 day(s) which contain
a total of 50 files changed, 1887 insertions(+), 527 deletions(-).
The main changes are:
1) Add a user space notification mechanism via epoll when a struct_ops
object is getting detached/unregistered, from Kui-Feng Lee.
2) Big batch of BPF selftest refactoring for sockmap and BPF congctl
tests, from Geliang Tang.
3) Add BTF field (type and string fields, right now) iterator support
to libbpf instead of using existing callback-based approaches,
from Andrii Nakryiko.
4) Extend BPF selftests for the latter with a new btf_field_iter
selftest, from Alan Maguire.
5) Add new kfuncs for a generic, open-coded bits iterator,
from Yafang Shao.
6) Fix BPF selftests' kallsyms_find() helper under kernels configured
with CONFIG_LTO_CLANG_THIN, from Yonghong Song.
7) Remove a bunch of unused structs in BPF selftests,
from David Alan Gilbert.
8) Convert test_sockmap section names into names understood by libbpf
so it can deduce program type and attach type, from Jakub Sitnicki.
9) Extend libbpf with the ability to configure log verbosity
via LIBBPF_LOG_LEVEL environment variable, from Mykyta Yatsenko.
10) Fix BPF selftests with regards to bpf_cookie and find_vma flakiness
in nested VMs, from Song Liu.
11) Extend riscv32/64 JITs to introduce shift/add helpers to generate Zba
optimization, from Xiao Wang.
12) Enable BPF programs to declare arrays and struct fields with kptr,
bpf_rb_root, and bpf_list_head, from Kui-Feng Lee.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (54 commits)
selftests/bpf: Drop useless arguments of do_test in bpf_tcp_ca
selftests/bpf: Use start_test in test_dctcp in bpf_tcp_ca
selftests/bpf: Use start_test in test_dctcp_fallback in bpf_tcp_ca
selftests/bpf: Add start_test helper in bpf_tcp_ca
selftests/bpf: Use connect_to_fd_opts in do_test in bpf_tcp_ca
libbpf: Auto-attach struct_ops BPF maps in BPF skeleton
selftests/bpf: Add btf_field_iter selftests
selftests/bpf: Fix send_signal test with nested CONFIG_PARAVIRT
libbpf: Remove callback-based type/string BTF field visitor helpers
bpftool: Use BTF field iterator in btfgen
libbpf: Make use of BTF field iterator in BTF handling code
libbpf: Make use of BTF field iterator in BPF linker code
libbpf: Add BTF field iterator
selftests/bpf: Ignore .llvm.<hash> suffix in kallsyms_find()
selftests/bpf: Fix bpf_cookie and find_vma in nested VM
selftests/bpf: Test global bpf_list_head arrays.
selftests/bpf: Test global bpf_rb_root arrays and fields in nested struct types.
selftests/bpf: Test kptr arrays and kptrs in nested struct fields.
bpf: limit the number of levels of a nested struct type.
bpf: look into the types of the fields of a struct type recursively.
...
====================
Link: https://lore.kernel.org/r/20240606223146.23020-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ACLs that reside in the algorithmic TCAM (A-TCAM) in Spectrum-2 and
newer ASICs can share the same mask if their masks only differ in up to
8 consecutive bits. For example, consider the following filters:
# tc filter add dev swp1 ingress pref 1 proto ip flower dst_ip 192.0.2.0/24 action drop
# tc filter add dev swp1 ingress pref 1 proto ip flower dst_ip 198.51.100.128/25 action drop
The second filter can use the same mask as the first (dst_ip/24) with a
delta of 1 bit.
However, the above only works because the two filters have different
values in the common unmasked part (dst_ip/24). When entries have the
same value in the common unmasked part they create undesired collisions
in the device since many entries now have the same key. This leads to
firmware errors such as [1] and to a reduced scale.
Fix by adjusting the hash table key to only include the value in the
common unmasked part. That is, without including the delta bits. That
way the driver will detect the collision during filter insertion and
spill the filter into the circuit TCAM (C-TCAM).
Add a test case that fails without the fix and adjust existing cases
that check C-TCAM spillage according to the above limitation.
[1]
mlxsw_spectrum2 0000:06:00.0: EMAD reg access failed (tid=3379b18a00003394,reg_id=3027(ptce3),type=write,status=8(resource not available))
Fixes: c22291f7cf ("mlxsw: spectrum: acl: Implement delta for ERP")
Reported-by: Alexander Zubkov <green@qrator.net>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Tested-by: Alexander Zubkov <green@qrator.net>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Update copies of kernel headers, which resulted in support for the
new 'mseal' syscall, SUBVOL statx return mask bit, RISC-V and PPC
prctls, fcntl's DUPFD_QUERY, POSTED_MSI_NOTIFICATION IRQ vector,
'map_shadow_stack' syscall for x86-32.
- Revert perf.data record memory allocation optimization that ended up
causing a regression, work is being done to re-introduce it in the
next merge window.
- Fix handling of minimal vmlinux.h file used with BPF's CO-RE when
interrupting the build.
* tag 'perf-tools-fixes-for-v6.10-2-2024-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf bpf: Fix handling of minimal vmlinux.h file when interrupting the build
Revert "perf record: Reduce memory for recording PERF_RECORD_LOST_SAMPLES event"
tools headers arm64: Sync arm64's cputype.h with the kernel sources
tools headers uapi: Sync linux/stat.h with the kernel sources to pick STATX_SUBVOL
tools headers UAPI: Update i915_drm.h with the kernel sources
tools headers UAPI: Sync kvm headers with the kernel sources
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools headers: Update the syscall tables and unistd.h, mostly to support the new 'mseal' syscall
perf trace beauty: Update the arch/x86/include/asm/irq_vectors.h copy with the kernel sources to pick POSTED_MSI_NOTIFICATION
perf beauty: Update copy of linux/socket.h with the kernel sources
tools headers UAPI: Sync fcntl.h with the kernel sources to pick F_DUPFD_QUERY
tools headers UAPI: Sync linux/prctl.h with the kernel sources
tools include UAPI: Sync linux/stat.h with the kernel sources
Pull s390 fixes from Alexander Gordeev:
- Do not create PT_LOAD program header for the kenel image when the
virtual memory informaton in OS_INFO data is not available. That
fixes stand-alone dump failures against kernels that do not provide
the virtual memory informaton
- Add KVM s390 shared zeropage selftest
* tag 's390-6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
KVM: s390x: selftests: Add shared zeropage test
s390/crash: Do not use VM info if os_info does not have it
This patch uses connect_to_fd_opts() instead of using connect_fd_to_fd()
and settcpca() in do_test() in prog_tests/bpf_tcp_ca.c to accept a struct
network_helper_opts argument.
Then define a dctcp dedicated post_socket_cb callback stg_post_socket_cb(),
invoking both settcpca() and bpf_map_update_elem() in it, and set it in
test_dctcp(). For passing map_fd into stg_post_socket_cb() callback, a new
member map_fd is added in struct cb_opts.
Add another "const struct network_helper_opts *cli_opts" to do_test() to
separate it from the server "opts".
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/876ec90430865bc468e3b7f6fb2648420b075548.1717054461.git.tanggeliang@kylinos.cn
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/pensando/ionic/ionic_txrx.c
d9c0420999 ("ionic: Mark error paths in the data path as unlikely")
491aee894a ("ionic: fix kernel panic in XDP_TX action")
net/ipv6/ip6_fib.c
b4cb4a1391 ("net: use unrcu_pointer() helper")
b01e1c0307 ("ipv6: fix possible race in __fib6_drop_pcpu_from()")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similarly to `bpf_program`, support `bpf_map` automatic attachment in
`bpf_object__attach_skeleton`. Currently only struct_ops maps could be
attached.
On bpftool side, code-generate links in skeleton struct for struct_ops maps.
Similarly to `bpf_program_skeleton`, set links in `bpf_map_skeleton`.
On libbpf side, extend `bpf_map` with new `autoattach` field to support
enabling or disabling autoattach functionality, introducing
getter/setter for this field.
`bpf_object__(attach|detach)_skeleton` is extended with
attaching/detaching struct_ops maps logic.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240605175135.117127-1-yatsenko@meta.com
Pull networking fixes from Jakub Kicinski:
"Including fixes from BPF and big collection of fixes for WiFi core and
drivers.
Current release - regressions:
- vxlan: fix regression when dropping packets due to invalid src
addresses
- bpf: fix a potential use-after-free in bpf_link_free()
- xdp: revert support for redirect to any xsk socket bound to the
same UMEM as it can result in a corruption
- virtio_net:
- add missing lock protection when reading return code from
control_buf
- fix false-positive lockdep splat in DIM
- Revert "wifi: wilc1000: convert list management to RCU"
- wifi: ath11k: fix error path in ath11k_pcic_ext_irq_config
Previous releases - regressions:
- rtnetlink: make the "split" NLM_DONE handling generic, restore the
old behavior for two cases where we started coalescing those
messages with normal messages, breaking sloppily-coded userspace
- wifi:
- cfg80211: validate HE operation element parsing
- cfg80211: fix 6 GHz scan request building
- mt76: mt7615: add missing chanctx ops
- ath11k: move power type check to ASSOC stage, fix connecting to
6 GHz AP
- ath11k: fix WCN6750 firmware crash caused by 17 num_vdevs
- rtlwifi: ignore IEEE80211_CONF_CHANGE_RETRY_LIMITS
- iwlwifi: mvm: fix a crash on 7265
Previous releases - always broken:
- ncsi: prevent multi-threaded channel probing, a spec violation
- vmxnet3: disable rx data ring on dma allocation failure
- ethtool: init tsinfo stats if requested, prevent unintentionally
reporting all-zero stats on devices which don't implement any
- dst_cache: fix possible races in less common IPv6 features
- tcp: auth: don't consider TCP_CLOSE to be in TCP_AO_ESTABLISHED
- ax25: fix two refcounting bugs
- eth: ionic: fix kernel panic in XDP_TX action
Misc:
- tcp: count CLOSE-WAIT sockets for TCP_MIB_CURRESTAB"
* tag 'net-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (107 commits)
selftests: net: lib: set 'i' as local
selftests: net: lib: avoid error removing empty netns name
selftests: net: lib: support errexit with busywait
net: ethtool: fix the error condition in ethtool_get_phy_stats_ethtool()
ipv6: fix possible race in __fib6_drop_pcpu_from()
af_unix: Annotate data-race of sk->sk_shutdown in sk_diag_fill().
af_unix: Use skb_queue_len_lockless() in sk_diag_show_rqlen().
af_unix: Use skb_queue_empty_lockless() in unix_release_sock().
af_unix: Use unix_recvq_full_lockless() in unix_stream_connect().
af_unix: Annotate data-race of net->unx.sysctl_max_dgram_qlen.
af_unix: Annotate data-races around sk->sk_sndbuf.
af_unix: Annotate data-races around sk->sk_state in UNIX_DIAG.
af_unix: Annotate data-race of sk->sk_state in unix_stream_read_skb().
af_unix: Annotate data-races around sk->sk_state in sendmsg() and recvmsg().
af_unix: Annotate data-race of sk->sk_state in unix_accept().
af_unix: Annotate data-race of sk->sk_state in unix_stream_connect().
af_unix: Annotate data-races around sk->sk_state in unix_write_space() and poll().
af_unix: Annotate data-race of sk->sk_state in unix_inq_len().
af_unix: Annodate data-races around sk->sk_state for writers.
af_unix: Set sk->sk_state under unix_state_lock() for truly disconencted peer.
...
Without this, the 'i' variable declared before could be overridden by
accident, e.g.
for i in "${@}"; do
__ksft_status_merge "${i}" ## 'i' has been modified
foo "${i}" ## using 'i' with an unexpected value
done
After a quick look, it looks like 'i' is currently not used after having
been modified in __ksft_status_merge(), but still, better be safe than
sorry. I saw this while modifying the same file, not because I suspected
an issue somewhere.
Fixes: 596c8819cb ("selftests: forwarding: Have RET track kselftest framework constants")
Acked-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240605-upstream-net-20240605-selftests-net-lib-fixes-v1-3-b3afadd368c9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fixed MAC addresses help with debugging as last four bytes identify the
network namespace.
Moreover, it allows to mimic the real life setup with for example bridge
having the same MAC address on each port.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Link: https://lore.kernel.org/r/20240603093322.3150030-2-lukma@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf 2024-06-05
We've added 8 non-merge commits during the last 6 day(s) which contain
a total of 9 files changed, 34 insertions(+), 35 deletions(-).
The main changes are:
1) Fix a potential use-after-free in bpf_link_free when the link uses
dealloc_deferred to free the link object but later still tests for
presence of link->ops->dealloc, from Cong Wang.
2) Fix BPF test infra to set the run context for rawtp test_run callback
where syzbot reported a crash, from Jiri Olsa.
3) Fix bpf_session_cookie BTF_ID in the special_kfunc_set list to exclude
it for the case of !CONFIG_FPROBE, also from Jiri Olsa.
4) Fix a Coverity static analysis report to not close() a link_fd of -1
in the multi-uprobe feature detector, from Andrii Nakryiko.
5) Revert support for redirect to any xsk socket bound to the same umem
as it can result in corrupted ring state which can lead to a crash when
flushing rings. A different approach will be pursued for bpf-next to
address it safely, from Magnus Karlsson.
6) Fix inet_csk_accept prototype in test_sk_storage_tracing.c which caused
BPF CI failure after the last tree fast forwarding, from Andrii Nakryiko.
7) Fix a coccicheck warning in BPF devmap that iterator variable cannot
be NULL, from Thorsten Blum.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
Revert "xsk: Document ability to redirect to any socket bound to the same umem"
Revert "xsk: Support redirect to any socket bound to the same umem"
bpf: Set run context for rawtp test_run callback
bpf: Fix a potential use-after-free in bpf_link_free()
bpf, devmap: Remove unnecessary if check in for loop
libbpf: don't close(-1) in multi-uprobe feature detector
bpf: Fix bpf_session_cookie BTF_ID in special_kfunc_set list
selftests/bpf: fix inet_csk_accept prototype in test_sk_storage_tracing.c
====================
Link: https://lore.kernel.org/r/20240605091525.22628-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull power management fixes from Rafael Wysocki:
"These fix the intel_pstate and amd-pstate cpufreq drivers and the
cpupower utility.
Specifics:
- Fix a recently introduced unchecked HWP MSR access in the
intel_pstate driver (Srinivas Pandruvada)
- Add missing conversion from MHz to KHz to amd_pstate_set_boost() to
address sysfs inteface inconsistency and fix P-state frequency
reporting on AMD Family 1Ah CPUs in the cpupower utility (Dhananjay
Ugwekar)
- Get rid of an excess global header file used by the amd-pstate
cpufreq driver (Arnd Bergmann)"
* tag 'pm-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Fix unchecked HWP MSR access
cpufreq: amd-pstate: Fix the inconsistency in max frequency units
cpufreq: amd-pstate: remove global header file
tools/power/cpupower: Fix Pstate frequency reporting on AMD Family 1Ah CPUs
Let's test that we can have shared zeropages in our process as long as
storage keys are not getting used, that shared zeropages are properly
unshared (replaced by anonymous pages) once storage keys are enabled,
and that no new shared zeropages are populated after storage keys
were enabled.
We require the new pagemap interface to detect the shared zeropage.
On an old kernel (zeropages always disabled):
# ./s390x/shared_zeropage_test
TAP version 13
1..3
not ok 1 Shared zeropages should be enabled
ok 2 Shared zeropage should be gone
ok 3 Shared zeropages should be disabled
# Totals: pass:2 fail:1 xfail:0 xpass:0 skip:0 error:0
On a fixed kernel:
# ./s390x/shared_zeropage_test
TAP version 13
1..3
ok 1 Shared zeropages should be enabled
ok 2 Shared zeropage should be gone
ok 3 Shared zeropages should be disabled
# Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0
Testing of UFFDIO_ZEROPAGE can be added later.
[ agordeev: Fixed checkpatch complaint, added ucall_common.h include ]
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Tested-by: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/r/20240412084329.30315-1-david@redhat.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Implement iterator-based type ID and string offset BTF field iterator.
This is used extensively in BTF-handling code and BPF linker code for
various sanity checks, rewriting IDs/offsets, etc. Currently this is
implemented as visitor pattern calling custom callbacks, which makes the
logic (especially in simple cases) unnecessarily obscure and harder to
follow.
Having equivalent functionality using iterator pattern makes for simpler
to understand and maintain code. As we add more code for BTF processing
logic in libbpf, it's best to switch to iterator pattern before adding
more callback-based code.
The idea for iterator-based implementation is to record offsets of
necessary fields within fixed btf_type parts (which should be iterated
just once), and, for kinds that have multiple members (based on vlen
field), record where in each member necessary fields are located.
Generic iteration code then just keeps track of last offset that was
returned and handles N members correctly. Return type is just u32
pointer, where NULL is returned when all relevant fields were already
iterated.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240605001629.4061937-2-andrii@kernel.org
Ingo reported that he was seeing these when hitting Control+C during a
perf tools build:
Makefile.perf:1149: *** Missing bpftool input for generating vmlinux.h. Stop.
The failure happens when you don't have vmlinux.h or vmlinux with BTF.
ifeq ($(VMLINUX_H),)
ifeq ($(VMLINUX_BTF),)
$(error Missing bpftool input for generating vmlinux.h)
endif
endif
VMLINUX_BTF can be empty if you didn't build a kernel or it doesn't have
a BTF section and the current kernel also has no BTF. This is totally
ok.
But VMLINUX_H should be set to the minimal version in the source tree
(unless you overwrite it manually) when you don't pass GEN_VMLINUX_H=1
(which requires VMLINUX_BTF should not be empty). The problem is that
it's defined in Makefile.config which is not included for `make clean`.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Link: http://lore.kernel.org/lkml/CAM9d7ch5HTr+k+_GpbMrX0HUo5BZ11byh1xq0Two7B7RQACuNw@mail.gmail.com
Link: http://lore.kernel.org/lkml/ZjssGrj+abyC6mYP@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This reverts commit 7d1405c71d.
This causes segfaults in some cases, as reported by Milian:
```
sudo /usr/bin/perf record -z --call-graph dwarf -e cycles -e
raw_syscalls:sys_enter ls
...
[ perf record: Woken up 3 times to write data ]
malloc(): invalid next size (unsorted)
Aborted
```
Backtrace with GDB + debuginfod:
```
malloc(): invalid next size (unsorted)
Thread 1 "perf" received signal SIGABRT, Aborted.
__pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6,
no_tid=no_tid@entry=0) at pthread_kill.c:44
Downloading source file /usr/src/debug/glibc/glibc/nptl/pthread_kill.c
44 return INTERNAL_SYSCALL_ERROR_P (ret) ? INTERNAL_SYSCALL_ERRNO
(ret) : 0;
(gdb) bt
#0 __pthread_kill_implementation (threadid=<optimized out>,
signo=signo@entry=6, no_tid=no_tid@entry=0) at pthread_kill.c:44
#1 0x00007ffff6ea8eb3 in __pthread_kill_internal (threadid=<optimized out>,
signo=6) at pthread_kill.c:78
#2 0x00007ffff6e50a30 in __GI_raise (sig=sig@entry=6) at ../sysdeps/posix/
raise.c:26
#3 0x00007ffff6e384c3 in __GI_abort () at abort.c:79
#4 0x00007ffff6e39354 in __libc_message_impl (fmt=fmt@entry=0x7ffff6fc22ea
"%s\n") at ../sysdeps/posix/libc_fatal.c:132
#5 0x00007ffff6eb3085 in malloc_printerr (str=str@entry=0x7ffff6fc5850
"malloc(): invalid next size (unsorted)") at malloc.c:5772
#6 0x00007ffff6eb657c in _int_malloc (av=av@entry=0x7ffff6ff6ac0
<main_arena>, bytes=bytes@entry=368) at malloc.c:4081
#7 0x00007ffff6eb877e in __libc_calloc (n=<optimized out>,
elem_size=<optimized out>) at malloc.c:3754
#8 0x000055555569bdb6 in perf_session.do_write_header ()
#9 0x00005555555a373a in __cmd_record.constprop.0 ()
#10 0x00005555555a6846 in cmd_record ()
#11 0x000055555564db7f in run_builtin ()
#12 0x000055555558ed77 in main ()
```
Valgrind memcheck:
```
==45136== Invalid write of size 8
==45136== at 0x2B38A5: perf_event__synthesize_id_sample (in /usr/bin/perf)
==45136== by 0x157069: __cmd_record.constprop.0 (in /usr/bin/perf)
==45136== by 0x15A845: cmd_record (in /usr/bin/perf)
==45136== by 0x201B7E: run_builtin (in /usr/bin/perf)
==45136== by 0x142D76: main (in /usr/bin/perf)
==45136== Address 0x6a866a8 is 0 bytes after a block of size 40 alloc'd
==45136== at 0x4849BF3: calloc (vg_replace_malloc.c:1675)
==45136== by 0x3574AB: zalloc (in /usr/bin/perf)
==45136== by 0x1570E0: __cmd_record.constprop.0 (in /usr/bin/perf)
==45136== by 0x15A845: cmd_record (in /usr/bin/perf)
==45136== by 0x201B7E: run_builtin (in /usr/bin/perf)
==45136== by 0x142D76: main (in /usr/bin/perf)
==45136==
==45136== Syscall param write(buf) points to unaddressable byte(s)
==45136== at 0x575953D: __libc_write (write.c:26)
==45136== by 0x575953D: write (write.c:24)
==45136== by 0x35761F: ion (in /usr/bin/perf)
==45136== by 0x357778: writen (in /usr/bin/perf)
==45136== by 0x1548F7: record__write (in /usr/bin/perf)
==45136== by 0x15708A: __cmd_record.constprop.0 (in /usr/bin/perf)
==45136== by 0x15A845: cmd_record (in /usr/bin/perf)
==45136== by 0x201B7E: run_builtin (in /usr/bin/perf)
==45136== by 0x142D76: main (in /usr/bin/perf)
==45136== Address 0x6a866a8 is 0 bytes after a block of size 40 alloc'd
==45136== at 0x4849BF3: calloc (vg_replace_malloc.c:1675)
==45136== by 0x3574AB: zalloc (in /usr/bin/perf)
==45136== by 0x1570E0: __cmd_record.constprop.0 (in /usr/bin/perf)
==45136== by 0x15A845: cmd_record (in /usr/bin/perf)
==45136== by 0x201B7E: run_builtin (in /usr/bin/perf)
==45136== by 0x142D76: main (in /usr/bin/perf)
==45136==
-----
Closes: https://lore.kernel.org/linux-perf-users/23879991.0LEYPuXRzz@milian-workstation/
Reported-by: Milian Wolff <milian.wolff@kdab.com>
Tested-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@kernel.org # 6.8+
Link: https://lore.kernel.org/lkml/Zl9ksOlHJHnKM70p@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
hsr_redbox.sh test need to create bridge for testing. Add the missing
config CONFIG_BRIDGE in config file.
Fixes: eafbf0574e ("test: hsr: Extend the hsr_redbox.sh to have more SAN devices connected")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Tested-by: Simon Horman <horms@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
I hit the following failure when running selftests with
internal backported upstream kernel:
test_ksyms:PASS:kallsyms_fopen 0 nsec
test_ksyms:FAIL:ksym_find symbol 'bpf_link_fops' not found
#123 ksyms:FAIL
In /proc/kallsyms, we have
$ cat /proc/kallsyms | grep bpf_link_fops
ffffffff829f0cb0 d bpf_link_fops.llvm.12608678492448798416
The CONFIG_LTO_CLANG_THIN is enabled in the kernel which is responsible
for bpf_link_fops.llvm.12608678492448798416 symbol name.
In prog_tests/ksyms.c we have
kallsyms_find("bpf_link_fops", &link_fops_addr)
and kallsyms_find() compares "bpf_link_fops" with symbols
in /proc/kallsyms in order to find the entry. With
bpf_link_fops.llvm.<hash> in /proc/kallsyms, the kallsyms_find()
failed.
To fix the issue, in kallsyms_find(), if a symbol has suffix
.llvm.<hash>, that suffix will be ignored for comparison.
This fixed the test failure.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240604180034.1356016-1-yonghong.song@linux.dev
To get the changes in:
0ce85db6c2 ("arm64: cputype: Add Neoverse-V3 definitions")
02a0a04676 ("arm64: cputype: Add Cortex-X4 definitions")
f4d9d9dcc7 ("arm64: Add Neoverse-V2 part")
That makes this perf source code to be rebuilt:
CC /tmp/build/perf-tools/util/arm-spe.o
The changes in the above patch add MIDR_NEOVERSE_V[23] and
MIDR_NEOVERSE_V1 is used in arm-spe.c, so probably we need to add those
and perhaps MIDR_CORTEX_X4 to that array? Or maybe we need to leave this
for later when this is all tested on those machines?
static const struct midr_range neoverse_spe[] = {
MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N1),
MIDR_ALL_VERSIONS(MIDR_NEOVERSE_N2),
MIDR_ALL_VERSIONS(MIDR_NEOVERSE_V1),
{},
};
Mark Rutland recommended about arm-spe.c:
"I would not touch this for now -- someone would have to go audit the
TRMs to check that those other cores have the same encoding, and I think
it'd be better to do that as a follow-up."
That addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/arch/arm64/include/asm/cputype.h arch/arm64/include/asm/cputype.h
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Besar Wicaksono <bwicaksono@nvidia.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/lkml/Zl8cYk0Tai2fs7aM@x1
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
bpf_cookie and find_vma are flaky in nested VMs, which is used by some CI
systems. It turns out these failures are caused by unreliable perf event
in nested VM. Fix these by:
1. Use PERF_COUNT_SW_CPU_CLOCK in find_vma;
2. Increase sample_freq in bpf_cookie.
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240604070700.3032142-1-song@kernel.org
Pull kselftest fixes from Shuah Khan:
"Fixes to build warnings in several tests and fixes to ftrace tests"
* tag 'linux_kselftest-fixes-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/futex: don't pass a const char* to asprintf(3)
selftests/futex: don't redefine .PHONY targets (all, clean)
selftests/tracing: Fix event filter test to retry up to 10 times
selftests/futex: pass _GNU_SOURCE without a value to the compiler
selftests/overlayfs: Fix build error on ppc64
selftests/openat2: Fix build warnings on ppc64
selftests: cachestat: Fix build warnings on ppc64
tracing/selftests: Fix kprobe event name test for .isra. functions
selftests/ftrace: Update required config
selftests/ftrace: Fix to check required event file
kselftest/alsa: Ensure _GNU_SOURCE is defined
