It's rare to find a system that has more than 4 sockets,
but a system can have more than 4 NUMA nodes if each socket
exposes its chiplets as separate NUMA nodes.
In particular, our CI caught a failure in this test on a system with
two sockets, each containing an 'AMD EPYC 7601 32-Core Processor'.
Bump the limit to 32, just in case.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-ID: <20260612150038.1277394-1-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM/arm64 updates for 7.2
* New features:
- None. Zilch. Nada. Que dalle.
* Fixes and other improvements:
- Significant cleanup of the vgic-v5 PPI support which was merged in
7.1. This makes the code more maintainable, and squashes a couple
of bugs in the meantime.
- Set of fixes for the handling of the MMU in an NV context,
particularly VNCR-triggered faults. S1POE support is fixed
as well.
- Large set of pKVM fixes, mostly addressing recurring issues
around hypervisor tracking of donated pages in obscure cases
where the donation could fail and leave things in a bizarre
state.
- Fixes for the so-called "lazy vgic init", which resulted in
sleeping operations in non-preemptible sections. This turned
out to be far more invasive than initially expected...
- Reduce the overhead of L1/L2 context switch by not touching
the FP registers.
- Fix the way non-implemented page sizes are dealt with when
a guest insist on using them for S2 translation.
- The usual set of low-impact fixes and cleanups all over the map.
KVM SVM changes for 7.2
- Add support for virtualizing gPAT (KVM previously just used L1's PAT when
running L2).
- Fix goofs where KVM mishandles side effects (e.g. single-step and PMC
updates) when emulating VMRUN.
- Fix a variety of bugs in AVIC's handling of x2APIC MSR interception, most
notably where KVM didn't disable interception of IRR, ISR, and TMR regs.
- Add support for virtualizing Host-Only/Guest-Only bits in the mediated PMU.
KVM SEV changes for 7.2
- Don't advertise support for unusuable VM types, and account for VM types
that are disabled by firmware, e.g. to mitigate security vulnerabilities.
- Rewrite the SEV {en,de}crypt debug ioctls as they were riddle with bugs and
unnecessarily complicated, and add comprehensive tests.
- Clean up and deduplicate the SEV page pinning code.
- Fix minor goofs related to writing back CPUID information after firmware
rejects a CPUID page for an SNP vCPU.
KVM selftests changes for 7.2
- Randomize the dirty log test's delay when reaping the bitmap on the first
pass, as always waiting only 1ms hid a KVM RISC-V bug as the test reaped the
bitmap before KVM could build up enough state to hit the bug.
- A pile of one-off fixes and cleanups.
KVM misc x86 changes for 7.2
- Handle EXIT_FASTPATH_EXIT_USERSPACE in vendor code to ensure vendor code
gets a chance to handle things like reaping the PML buffer.
- Ensure KVM's copy of CR0 and CR3 are up-to-date on SVM prior to invoking
fastpath handlers.
- Update KVM's view of PV async enabling if and only if the MSR write fully
succeeds.
- Fix a variety of issues where the emulator doesn't honor guest-debug state,
and clean up related code along the way.
- Synthesize EPT Violation and #NPF "error code" bits when injecting faults
into L1 that didn't originate in hardware (in which case the VMCS/VMCB
doesn't hold relevant information).
- Add support for virtualizing (well, emulating) AMD's flavor of CPL>0 CPUID
faulting.
- Clean up the GPR APIs so that KVM's use of "raw" is consistent, and fix a
variety of minor bugs along the way.
- Fix an OOB memory access due to not checking the VP ID when handling a
Hyper-V PV TLB flush for L2.
- Fix a bug in the mediated PMU's handling of fixed counters that allowed the
guest to bypass the PMU event filter.
- Allow userspace to return EAGAIN when handling SNP and TDX hypercalls, so
the KVM can forward a "retry" status code to the guest, and reserve all
unused error codes for future usage.
- Misc fixes and cleanups.
KVM guest_memfd changes for 7.2
- Return -EEXIST instead of -EINVAL if userspace attempts to bind a gmem
range to multiple memslots, and fix the test that was supposed to ensure
KVM returns -EEXIST.
- Treat memslot binding offsets and sizes as unsigned values to fix a bug
where KVM interprets a large "offset + size" as a negative value and allows
a nonsensical offset.
- Use the inode number instead of the page offset for the NUMA interleaving
index to fix a bug where the effective index would jump by two for
consecutive pages (the caller also adds in the page offset).
* kvm-arm64/vgic-v5-PPI-fixes:
: .
: Substantial cleanup of the vgic-v5 PPI support. From the original
: cover letter:
:
: "With the GICv5 PPi support merged in, it has become obvious that a few
: things could be improved, both from the correctness and maintainability
: angles."
: .
KVM: arm64: Fix arch timer interrupts for GICv3-on-GICv5 guests
irqchip/gic-v5: Immediately exec priority drop following activate
Documentation: KVM: Clarify that PMU_V3_IRQ IntID requirements for GICv5
Documentation: KVM: Fix typos in VGICv5 documentation
KVM: arm64: selftests: Improve error handling for GICv5 PPI selftest
KVM: arm64: selftests: Cleanup unused vars in GICv5 PPI selftest
KVM: arm64: selftests: Add missing GIC CDEN to no-vgic-v5 selftest
KVM: arm64: vgic-v5: Atomically assign bits to PPI DVI bitmap
KVM: arm64: vgic-v5: Add missing trap handing for NV triage
KVM: arm64: vgic-v5: Limit support to 64 PPIs
KVM: arm64: vgic: Rationalise per-CPU irq accessor
KVM: arm64: vgic-v5: Drop defensive checks from vgic_v5_ppi_queue_irq_unlock()
KVM: arm64: vgic: Consolidate vgic_allocate_private_irqs_locked()
KVM: arm64: vgic: Constify struct irq_ops usage
KVM: arm64: vgic-v5: Drop pointless ARM64_HAS_GICV5_CPUIF check
KVM: arm64: vgic-v5: Remove use of __assign_bit() with a constant
KVM: arm64: vgic-v5: Move PPI caps into kvm_vgic_global_state
KVM: arm64: vgic-v5: Add for_each_visible_v5_ppi() iterator
Signed-off-by: Marc Zyngier <maz@kernel.org>
Pull RISC-V fixes from Paul Walmsley:
- Fix the implementation of the CFI branch landing pad control prctl()s
to return -EINVAL if unknown control bits are set, rather than
silently ignoring the request; and add a kselftest for this case
- Fix unaligned access performance testing to happen earlier in boot,
which fixes a performance regression in the lib/checksum code
- Fix a binfmt_elf warning when dumping core (due to missing
.core_note_name for CFI registers)
* tag 'riscv-for-linux-7.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: cfi: reject unknown flags in PR_SET_CFI
riscv: Fix fast_unaligned_access_speed_key not getting initialized
riscv/ptrace: Use USER_REGSET_NOTE_TYPE for REGSET_CFI
Pull runtime verifier fixes from Steven Rostedt:
- Fix reset ordering on per-task destruction
Reset the task before dropping the slot instead of after, which was
causing out-of-bound memory accesses.
- Fix HA monitor synchronization and cleanup
Ensure synchronous cleanup for HA monitors by running timer callbacks
in RCU read-side critical sections and using synchronize_rcu() during
destruction.
- Avoid armed timers after tasks exit
Add automatic cleanup for per-task HA monitors to prevent timers from
firing after task exit.
- Fix memory ordering for DA/HA monitors
Fix race conditions during monitor start by using release-acquire
semantics for the monitoring flag.
- Fix initialization for DA/HA monitors
Ensure monitors are not initialized relying on potentially corrupted
state like the monitoring flag, that is not reset by all monitors
type and may have an unknown state in monitors reusing the storage
(per-task).
- Fix memory safety in per-task and per-object monitors
Prevent use-after-free and out-of-bounds access by synchronizing with
in-flight tracepoint probes using tracepoint_synchronize_unregister()
before freeing monitor storage or releasing task slots.
- Adjust monitors for preemptible tracepoints
Fix monitors that relied on tracepoints disabling preemption.
Explicitly disable task migration when per-CPU monitors handle events
to avoid accessing the wrong state and update the opid monitor logic.
- Fix incorrect __user specifier usage
Remove __user from a non-pointer variable in the extract_params()
helper.
- Fix bugs in the rv tool
Ensure strings are NUL-terminated, fix substring matching in monitor
searches, and improve cleanup and exit status handling.
- Fix several bugs in rvgen
Fix LTL literal stringification, subparsers' options handling, and
suffix stripping in dot2k.
* tag 'trace-rv-v7.1-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
verification/rvgen: Fix ltl2k writing True as a literal
verification/rvgen: Fix options shared among commands
verification/rvgen: Fix suffix strip in dot2k
tools/rv: Fix cleanup after failed trace setup
tools/rv: Fix substring match when listing container monitors
tools/rv: Fix substring match bug in monitor name search
tools/rv: Ensure monitor name and desc are NUL-terminated
rv: Use 0 to check preemption enabled in opid
rv: Prevent task migration while handling per-CPU events
rv: Ensure synchronous cleanup for HA monitors
rv: Add automatic cleanup handlers for per-task HA monitors
rv: Do not rely on clean monitor when initialising HA
rv: Fix monitor start ordering and memory ordering for monitoring flag
rv: Ensure all pending probes terminate on per-obj monitor destroy
rv: Prevent in-flight per-task handlers from using invalid slots
rv: Reset per-task DA monitors before releasing the slot
rv: Fix __user specifier usage in extract_params()
Pull RTLA fix from Steven Rostedt:
- Fix multi-character short option parsing
Fix regression in parsing of multiple-character short options
(eg -p100 /= -p 100/, -un /= -u -n/) caused by getopt_long()
internal state corruption after a refactoring.
* tag 'trace-tools-v7.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rtla: Fix parsing of multi-character short options
Pull misc fixes from Andrew Morton:
"11 hotfixes. 9 are for MM. 8 are cc:stable and the remaining 3 address
post-7.1 issues or aren't considered suitable for backporting.
Thre's a two-patch series "mm/damon/{reclaim,lru_sort}: handle ctx
allocation failures" from SeongJae Park which fixes a couple of DAMON
-ENOMEM bloopers. The rest are singletons - please see the individual
changelogs for details"
* tag 'mm-hotfixes-stable-2026-06-08-20-51' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/mincore: handle non-swap entries before !CONFIG_SWAP guard
arm64: mm: call pagetable dtor when freeing hot-removed page tables
mm/list_lru: drain before clearing xarray entry on reparent
mm/huge_memory: use correct flags for device private PMD entry
mm/damon/lru_sort: handle ctx allocation failure
mm/damon/reclaim: handle ctx allocation failure
zram: fix use-after-free in zram_bvec_write_partial()
MAINTAINERS: update Baoquan He's email address
tools headers UAPI: sync linux/taskstats.h for procacct.c
mm/cma_sysfs: skip inactive CMA areas in sysfs
ipc/shm: serialize orphan cleanup with shm_nattch updates
prctl(PR_SET_CFI,PR_CFI_BRANCH_LANDING_PADS) silently ignored
unknown control values. Only PR_CFI_{ENABLE,DISABLE,LOCK} should
be permitted.
This changes the behavior of the uABI (fails previously accepted bits
with EINVAL).
Fixes: 08ee155905 ("prctl: cfi: change the branch landing pad prctl()s to be more descriptive")
Signed-off-by: Richard Patel <ripatel@wii.dev>
Link: https://patch.msgid.link/20260518183918.322545-1-ripatel@wii.dev
[pjw@kernel.org: change the patch description to note that although this is a uABI change, it does not break the uABI]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Pull vfs fixes from Christian Brauner:
- Fix error handling in ovl_cache_get()
- Tighten access checks for exited tasks in pidfd_getfd()
- Fix selftests leak in __wait_for_test()
- Limit FUSE_NOTIFY_RETRIEVE to uptodate folios
- Reject fuse_notify() pagecache ops on directories
- Clear JOBCTL_PENDING_MASK for caller in zap_other_threads()
- Fix failure to unlock in nfsd4_create_file()
- Fix pointer arithmetic in qnx6 directory iteration
- Fix UAF due to unlocked ->mnt_ns read in may_decode_fh()
- Avoid potential null folio->mapping deref during iomap error
reporting
* tag 'vfs-7.1-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iomap: avoid potential null folio->mapping deref during error reporting
fhandle: fix UAF due to unlocked ->mnt_ns read in may_decode_fh()
fs/qnx6: fix pointer arithmetic in directory iteration
VFS: fix possible failure to unlock in nfsd4_create_file()
signal: clear JOBCTL_PENDING_MASK for caller in zap_other_threads()
fuse: reject fuse_notify() pagecache ops on directories
fuse: limit FUSE_NOTIFY_RETRIEVE to uptodate folios
selftests: harness: fix pidfd leak in __wait_for_test
pidfd: refuse access to tasks that have started exiting harder
ovl: keep err zero after successful ovl_cache_get()
Pull tracing/probes fix from Masami Hiramatsu:
"Fix the eprobe event parser to point error position correctly"
* tag 'probes-fixes-v7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/probes: Point the error offset correctly for eprobe argument error
Pull networking fixes from Jakub Kicinski:
"Including fixes from Netfilter, wireless and Bluetooth.
Current release - fix to a fix:
- Bluetooth: MGMT: fix backward compatibility with bluetoothd
which adds stray bytes to MGMT_OP_ADD_EXT_ADV_DATA
Previous releases - regressions:
- af_unix: fix inq_len update inaccuracy on partial read
- eth: fec: fix pinctrl default state restore order on resume
- wifi: iwlwifi:
- mvm: don't support the reset handshake for old firmwares
- pcie: simplify the resume flow if fast resume is not used,
work around NIC access failures
Previous releases - always broken:
- Bluetooth: L2CAP: reject BR/EDR signaling packets over MTUsig
- sctp: fix a couple of bugs in COOKIE_ECHO processing
- sched: fix pedit partial COW leading to page cache corruption
- wifi: nl80211: reject oversized EMA RNR lists
- netfilter:
- conntrack_irc: fix possible out-of-bounds read
- bridge: make ebt_snat ARP rewrite writable
- appletalk: zero-initialize aarp_entry to prevent heap info leak
- ipv4: restrict IPOPT_SSRR and IPOPT_LSRR options
- mptcp: fix number of bugs reported by AI scans and discovered
during NVMe over MPTCP testing"
* tag 'net-7.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits)
Reapply "bnxt_en: bring back rtnl_lock() in the bnxt_open() path"
udp: clear skb->dev before running a sockmap verdict
sctp: purge outqueue on stale COOKIE-ECHO handling
bonding: annotate data-races arcound churn variables
net/802/mrp: fix vector attribute parsing in mrp_pdu_parse_vecattr
rtase: Avoid sleeping in get_stats64()
ieee802154: 6lowpan: only accept IPv6 packets in lowpan_xmit()
ipv6: mcast: Fix use-after-free when processing MLD queries
selftests: net: add vxlan vnifilter notification test
vxlan: vnifilter: fix spurious notification on VNI update
vxlan: vnifilter: send notification on VNI add
rtase: Reset TX subqueue when clearing TX ring
octeontx2-af: npc: Fix CPT channel mask in npc_install_flow
dt-bindings: ethernet: eswin: fix hsp-sp-csr backward compatibility
sctp: validate cached peer INIT chunk length in COOKIE_ECHO processing
net/sched: fix pedit partial COW leading to page cache corruption
vsock/vmci: fix sk_ack_backlog leak on failed handshake
net: bonding: fix NULL pointer dereference in bond_do_ioctl()
geneve: fix length used in GRO hint UDP checksum adjustment
net: ethernet: mtk_eth_soc: Fix use-after-free in metadata dst teardown
...
Add a selftest for VXLAN vnifilter netlink notifications that verifies
RTM_NEWTUNNEL and RTM_DELTUNNEL are sent correctly when VNIs are added,
deleted, or updated, and that no spurious notifications are sent when
a VNI is re-added with the same attributes.
Signed-off-by: Andy Roulin <aroulin@nvidia.com>
Acked-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20260602185138.253265-4-aroulin@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The rvgen parser for LTL stores literal true values in the python
representation (capitalised True), this doesn't build in C.
The Literal class should already handle this case but ASTNode skips its
strigification method and converts the value (true/false) directly.
Fix by delegating ASTNode stringification to the Literal and Variable
classes instead of bypassing them.
Fixes: 97ffa4ce6a ("verification/rvgen: Add support for linear temporal logic")
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260514152055.229162-8-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
After rvgen was refactored to use subparsers, the common options (-a and
-D) were left in the main parser. This meant that they needed to be
called /before/ the subcommand and using them without subcommand was
allowed. This is not the original intent.
rvgen -D "some description" container -n name
Define the options as parent in the subparsers to allow them to be used
from both subcommands together with other options.
rvgen container -n name -D "some description"
Fixes: 5270a0e304 ("verification/dot2k: Replace is_container() hack with subparsers")
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260514152055.229162-7-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
__start_to_invariant_check() and __get_constraint_env() parse the
environment variable's name from sources that have it padded with the
monitor name. This is removed using rstrip(), which is not meant to
strip a substring but rather a set of characters.
Use removesuffix() to actually get rid of the trailing _<monitor name>.
Fixes: a82adadb16 ("verification/rvgen: Add support for Hybrid Automata")
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260601153840.124372-12-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Currently if ikm_setup_trace_instance() fails, the tool returns without
any cleanup, if rv was called with both -t and -r, this means the
reactor is not going to be cleared.
Jump to the cleanup label to restore the reactor if necessary.
Fixes: 6d60f89691 ("tools/rv: Add in-kernel monitor interface")
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260514152055.229162-5-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
When listing monitors within a specific container (rv list <container>),
the tool incorrectly matched monitors if the requested container name
was only a prefix of the actual container (e.g., 'rv list sche' would
incorrectly list monitors from 'sched:').
Fix this by ensuring the container name is an exact match and is
immediately followed by the ':' separator.
Fixes: eba321a16f ("tools/rv: Add support for nested monitors")
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260514152055.229162-3-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
__ikm_find_monitor_name() relies on strstr() to find a monitor by name,
which fails if the target monitor is a substring of a previously listed
monitor.
Fix it by tokenizing the available_monitors file and matching full
tokens instead.
Fixes: eba321a16f ("tools/rv: Add support for nested monitors")
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260514152055.229162-2-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
ikm_fill_monitor_definition() copies monitor name and description with
strncpy(), but does not guarantee NUL termination when source strings are
equal to or longer than the destination buffers.
Clamp copies to sizeof(dst) - 1 and explicitly append '\0' for both fields
to keep them safe for later string operations.
Suggested-by: unknownbbqrx <dev@unknownbbqr.xyz>
Fixes: 6d60f89691 ("tools/rv: Add in-kernel monitor interface")
Link: https://lore.kernel.org/r/20260604120946.90302-2-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
A bug was reported where the parsing of multi-character short options,
be it a short option with an argument specified without space (e.g.
"-p100") or multiple short options in one argument (e.g. -un), ignores
options specific to individual tools.
Furthermore, if the rest of the option is supposed to be an argument, it
gets reinterpreted as a string of options. For example, -p100 gets
interpreted as -100, which is due to hackish implementation read as
--no-thread --no-irq --no-irq with timerlat hist, causing rtla to error
out:
$ rtla timerlat hist -p100
no-irq and no-thread set, there is nothing to do here
This behavior is caused by getopt_long() being called twice on each
argument, once in common_parse_options(), once in [tool]_parse_args():
- common_parse_options() calls getopt_long() with an array of options
common for all rtla tools, while suppressing errors (opterr = 0).
- If the option fails to parse, common_parse_options() returns 0.
- If 0 is returned from common_parse_options(), [tool]_parse_args()
calls getopt_long() again, with its own set of options.
* [tool] means one of {osnoise,timerlat}_{top,hist}
At least in glibc, getopt_long() increments its internal nextchar
variable even if the option is not recognized. That means that in the
case of "-p100", common_parse_options() sets nextchar pointing to '1',
and timerlat_hist_parse_args() sees '1', not 'p'; the same then repeats
for the first and second '0'.
As there is no way to restore the correct internal state of
getopt_long() reliably, fix the issue by merging the common options back
to the longopt array and option string of the [tool]_parse_args()
functions using a macro; only the switch part is left in the original
function, which is renamed to set_common_option().
Fixes: 850cd24cb6 ("tools/rtla: Add common_parse_options()")
Reported-by: John Kacur <jkacur@redhat.com>
Tested-by: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/r/20260602125506.3325345-1-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Add test to verify that when a skb is partially consumed,
unix_inq_len() return correct remaining byte count.
Before:
# RUN scm_inq.stream.partial_read ...
# scm_inq.c:165:partial_read:Expected remain (512) == *(int *)CMSG_DATA(cmsg) (768)
# partial_read: Test terminated by assertion
# FAIL scm_inq.stream.partial_read
not ok 2 scm_inq.stream.partial_read
After:
# RUN scm_inq.stream.partial_read ...
# OK scm_inq.stream.partial_read
ok 2 scm_inq.stream.partial_read
Signed-off-by: Jianyu Li <jianyu.li@mediatek.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260601113640.231897-3-jianyu.li@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit 9b93f7e327 ("tools/getdelays: use the static UAPI headers
from tools/include/uapi"), the Makefile was changed to use
-I../include/uapi/ instead of -I../../usr/include to ensure tools always
use the up-to-date UAPI headers.
However, only linux/taskstats.h was added to tools/include/uapi/ in commit
e5bbb35a07 ("tools headers UAPI: sync linux/taskstats.h"), but
linux/acct.h was missing.
This causes procacct.c to fail to compile with:
procacct.c:234:37: error: 'AGROUP' undeclared (first use in this function)
gcc -I../include/uapi/ getdelays.c -o getdelays
gcc -I../include/uapi/ procacct.c -o procacct
procacct.c: In function `print_procacct':
procacct.c:234:37: error: `AGROUP' undeclared (first use in this function)
did you mean `NOGROUP'?
234 | , t->version >= 12 ? (t->ac_flag & AGROUP ? 'P' : 'T') : '?'
| ^~~~~~
| NOGROUP
procacct.c:234:37: note: each undeclared ident
because procacct.c uses the AGROUP macro defined in linux/acct.h.
Add the missing linux/acct.h to complete the static UAPI header set.
Link: https://lore.kernel.org/20260527213558929EhiHHy9EDTMjmg3uuDOMi@zte.com.cn
Fixes: 9b93f7e327 ("tools/getdelays: use the static UAPI headers from tools/include/uapi")
Signed-off-by: Wang Yaxin <wang.yaxin@zte.com.cn>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Cc: Fan Yu <fan.yu9@zte.com.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: Yang Yang <yang.yang29@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull cgroup fixes from Tejun Heo:
"One cpuset fix and a maintenance update, both low-risk:
- Fix cpuset partition CPU accounting under sibling CPU exclusion
that could produce wrong CPU assignments and trigger
scheduling-domain warnings. Includes selftests.
- Update an email address in MAINTAINERS"
* tag 'cgroup-for-7.1-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: Change Ridong's email
cgroup/cpuset: Add test cases for sibling CPU exclusion on partition update
cgroup/cpuset: Use effective_xcpus in partcmd_update add/del mask calculation
Pull sched_ext fixes from Tejun Heo:
"Two low-risk fixes:
- Drop a spurious warning that can fire during cgroup migration while
a sched_ext scheduler is loaded
- Fix a drgn-based debug script that broke after scheduler state
moved into a per-scheduler struct"
* tag 'sched_ext-for-7.1-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Don't warn on NULL cgrp_moving_from in scx_cgroup_move_task()
tools/sched_ext: Fix scx_show_state per-scheduler state reads
When KVM_X86_QUIRK_NESTED_SVM_SHARED_PAT is disabled, verify that KVM
correctly virtualizes the host PAT MSR and the guest PAT register for
nested SVM guests.
With nested NPT disabled:
* L1 and L2 share the same PAT
* The vmcb12.g_pat is ignored
With nested NPT enabled:
* An invalid g_pat in vmcb12 causes VMEXIT_INVALID
* RDMSR(IA32_PAT) from L2 returns the value of the guest PAT register
* WRMSR(IA32_PAT) from L2 is reflected in vmcb12's g_pat on VMEXIT
* RDMSR(IA32_PAT) from L1 returns the value of the host PAT MSR
Verify that save/restore with the vCPU in guest mode behaves as expected in
both cases, e.g. preserves both hPAT and gPAT when NPT is enabled.
Originally-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
[sean: use even fancier macro shenanigans]
Link: https://patch.msgid.link/20260528231052.404737-1-seanjc@google.com
[sean: avoid use of goto, print skips]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a regression (and proof-of-bug) testcase to ensure KVM rejects an
offset+size that would result in a negative value when computed as a signed
64-bit value. KVM had a flaw where it would allow binding a memslot to a
guest_memfd instance even with a wildly out-of-range offset, if the offset
and size were both positive values, but the combined offset+size was
negative.
Use "0x7fffffffffffffffull - page_size", i.e. "INT64_MAX - page_size", for
the offset as the size of the guest_memfd file must be at least page_size
(KVM requires memslots and gmem files to be host page-size aligned). I.e.
"INT64_MAX - page_size + size" is guaranteed to generate an offset+size
that is negative when converted to a signed 64-bit value *and* honors KVM's
alignment requirements.
Reviewed-by: Ackerley Tng <ackerleytng@google.com>
Tested-by: Ackerley Tng <ackerleytng@google.com>
Link: https://patch.msgid.link/20260602170921.1304394-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Hybrid automata monitors may start timers, depending on the model, these
may remain active on an exiting task and cause false positives or even
access freed memory.
Add an enable/disable hook in the HA code, currently only populated by
the per-task handler for registration and deregistration.
This hooks to the sched_process_exit event and ensures the timer is
stopped for every exiting task. The handler is enabled automatically but
may be disabled, for instance if the monitor uses the event for another
purpose (but should still manually ensure timers are stopped).
Fixes: f5587d1b6e ("rv: Add Hybrid Automata monitor type")
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260601153840.124372-8-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Fix to point the error offset correctly for eprobe argument error.
In the cleanup commit 1b8b0cd754 ("tracing/probes: Move event parameter
fetching code to common parser"), due to incorrect backward compatibility
aimed at conforming to the test specifications, the error location was set
to 0 when a non-existent formal parameter was specified for Eprobe.
However, this should be corrected in both the test and the implementation
to point correct error position.
Link: https://lore.kernel.org/all/177967567399.209006.1451571244515632097.stgit@devnote2/
Fixes: 1b8b0cd754 ("tracing/probes: Move event parameter fetching code to common parser")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Pull more networking fixes from Jakub Kicinski:
"Quick follow up, nothing super urgent here. Main reason I'm sending
this out is because the IPsec and Bluetooth PRs did not make it
yesterday. I don't want to have to send you all of this + whatever
comes next week, for rc7. The fixes under "Previous releases -
regressions" are for real user-reported regressions from v7.0.
Previous releases - regressions:
- Revert "ipv6: preserve insertion order for same-scope addresses"
- xfrm: move policy_bydst RCU sync, a fix which added a sync RCU on
netns exit got backported to stable and was causing serious
accumulation of dying netns's for real workloads
- pcs-mtk-lynxi: fix bpi-r3 serdes configuration
Previous releases - always broken:
- usual grab bag of race, locking and leak fixes for Bluetooth
- handful of page handling fixes for IPsec"
* tag 'net-7.1-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (36 commits)
wireguard: send: append trailer after expanding head
Revert "ipv6: preserve insertion order for same-scope addresses"
net: skbuff: fix pskb_carve leaking zcopy pages
ipv6: fix possible infinite loop in fib6_select_path()
ipv6: fix possible infinite loop in rt6_fill_node()
bpf: sockmap: fix tail fragment offset in bpf_msg_push_data
vsock/virtio: bind uarg before filling zerocopy skb
Revert "esp: fix page frag reference leak on skb_to_sgvec failure"
net: pcs: pcs-mtk-lynxi: fix bpi-r3 serdes configuration
sctp: fix race between sctp_wait_for_connect and peeloff
net: mana: Skip redundant detach on already-detached port
net: mana: Add NULL guards in teardown path to prevent panic on attach failure
Bluetooth: hci_sync: Reset device counters in hci_dev_close_sync()
Bluetooth: hci_sync: Set HCI_CMD_DRAIN_WORKQUEUE during device close
Bluetooth: hci_core: Rework hci_dev_do_reset() to use hci_sync functions
Bluetooth: ISO: serialize iso_sock_clear_timer with socket lock
Bluetooth: ISO: fix UAF in iso_recv_frame
Bluetooth: L2CAP: Fix possible crash on l2cap_ecred_conn_rsp
Bluetooth: l2cap: clear chan->ident on ECRED reconfiguration success
Bluetooth: hci_qca: Use 100 ms SSR delay for rampatch and NVM loading
...
Pull kvm fixes from Paolo Bonzini:
"arm64:
- Restore CONFIG_PKVM_DISABLE_STAGE2_ON_PANIC to its former glory by
making sure the config symbol is correctly spelled out in the code
- Don't reset the AArch32 view of the PMU counters to zero when the
guest is writing to them
- Fix an assorted collection of memory leaks in the newly added
tracing code
- Fix the capping of ZCR_EL2 which could be used in an unsanitised
way by an L2 guest
x86:
- Include the kernel's linux/mman.h in KVM selftests to ensure
MADV_COLLAPSE is defined, as older libc versions may not provide
it.
- Include execinfo.h if and only if KVM selftests are building
against glibc, and provide a test_dump_stack() for non-glibc
builds.
- Silence an annoying RCU splat on (even non-KVM-related) panics.
The splat is technically legit, but in practice not an issue. To
have a race, you would need to unload the KVM modules at exactly
the time a panic happens; and speaking of incredibly rare races,
taking the locks risks introducing a deadlock if the module unload
code took the lock on a CPU that has been halted. Which seems
possibly more likely than the RCU grace period issue, so just shut
it up. This code used to be in KVM but is now outside it; but the
x86 maintainers haven't picked it up, so here we are.
- Rate-limit global clock updates once again (but without delayed
work), as KVM was subtly relying on the old rate-limiting for NPT
correction to guard against "update storms" when running without a
master clock on systems with overcommitted CPUs.
- Fix a brown paper bag goof where KVM checked if ERAPS is "dirty"
instead of marking it dirty when emulating INVPCID.
- Flush the TLB when transitioning from xAVIC => x2AVIC to ensure the
CPU TLB doesn't contain AVIC-tagged entries for the APIC base GPA.
- The top 10 commits fix buffer overflow (and potential TOC/TOU)
flaws in the page state change protocol for encrypted VMs. AI
models find it quite easily given it was reported three times, but
aren't as good at writing a comprehensive fix. There's more to
clean up in the area, which will come in 7.2"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (22 commits)
KVM: SEV: Use READ_ONCE() when reading entries/indices from PSC buffer
KVM: SEV: Check PSC request indices against the actual size of the buffer
KVM: SEV: Don't explicitly pass PSC buffer to snp_begin_psc()
KVM: SEV: WARN if KVM attempts to setup scratch area with min_len==0
KVM: SEV: Compute the correct max length of the in-GHCB scratch area
KVM: SEV: Use the size of the PSC header as the minimum size for PSC requests
KVM: SEV: Ignore Port I/O requests of length '0'
KVM: SEV: Reject MMIO requests larger than 8 bytes with GHCB v2+
KVM: SEV: Ignore MMIO requests of length '0'
KVM: SEV: Require in-GHCB scratch area if GHCB v2+ is in use
KVM: arm64: Correctly cap ZCR_EL2 provided by a guest hypervisor
KVM: arm64: Fix memory leak in hyp_trace_unload()
KVM: arm64: Fix rollback in hyp_trace_buffer_share_hyp()
KVM: arm64: Fix meta-page unsharing in pKVM hyp tracing
KVM: arm64: PMU: Preserve AArch32 counter low bits
KVM: SVM: Flush the current TLB when transitioning from xAVIC => x2AVIC
KVM: x86: Fix ERAPS RAP clear on INVPCID single-context invalidation
KVM: arm64: Fix CONFIG_PKVM_DISABLE_STAGE2_ON_PANIC
KVM: selftests: Guard execinfo.h inclusion for non-glibc builds
KVM: x86: Rate-limit global clock updates on vCPU load
...
Chris Adams reported that preserving insertion order for same-scope
addresses is causing SSH connections to be dropped after stopping a VM
while running NetworkManager.
NetworkManager caches the IPv6 address configuration, when a RA arrives,
it determines the list of addresses to configure and checks if the
addresses are already in the right order in the kernel. If they aren't,
NetworkManager removes and re-adds them to achieve the desired order.
As the order changes, NetworkManager is confused and reconfigures the
addresses on every update. In addition, this would also affect to cloud
tooling that relies on IPv6 addresses order to identify primary and
secondaries addresses.
This reverts commit cb3de96eea.
Fixes: cb3de96eea ("ipv6: preserve insertion order for same-scope addresses")
Reported-by: Chris Adams <linux@cmadams.net>
Closes: https://lore.kernel.org/netdev/20260521135310.GC977@cmadams.net/
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://patch.msgid.link/20260529112357.5079-1-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
KVM x86 fixes for 7.1-rcN
- Include the kernel's linux/mman.h in KVM selftests to ensure MADV_COLLAPSE
is defined, as older libc versions may not provide it.
- Include execinfo.h if and only if KVM selftests are building against glibc,
and provide a test_dump_stack() for non-glibc builds.
- Fudge around an RCU splat in the emegerncy reboot code that is technically
a legitimate flaw, but in practice is a non-issue and fixing the flaw, e.g.
by adding locking, would incur meaningful risk, i.e. do more harm than good.
- Rate-limit global clock updates once again (but without delayed work), as
KVM was subtly relying on the old rate-limiting for NPT correction to guard
against "update storms" when running without a master clock on systems with
overcommitted CPUs.
- Fix a brown paper bag goof where KVM checked if ERAPS is "dirty" instead of
marking it dirty when emulating INVPCID.
- Flush the TLB when transitioning from xAVIC => x2AVIC to ensure the CPU TLB
doesn't contain AVIC-tagged entries for the APIC base GPA.
Pull Compute Express Link (CXL) fixes from Dave Jiang:
- cxl/test: update mock dev array before calling platform_device_add()
* tag 'cxl-fixes-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/test: Update mock dev array before calling platform_device_add()
Pull networking fixes from Paolo Abeni:
"This is again significantly bigger than the same point into the
previous cycle, but at least smaller than last week.
I'm not aware of any pending regression for the current cycle.
Including fixes from netfilter.
Current release - regressions:
- netfilter: walk fib6_siblings under RCU
Previous releases - regressions:
- netlink: fix sending unassigned nsid after assigned one
- bridge: fix sleep in atomic context in netlink path
- sched: fix ethx:ingress -> ethy:egress -> ethx:ingress mirred loop
- ipv4: fix net->ipv4.sysctl_local_reserved_ports UaF
- eth: tun: free page on short-frame rejection in tun_xdp_one()
Previous releases - always broken:
- skbuff: fix missing zerocopy reference in pskb_carve helpers
- handshake: drain pending requests at net namespace exit
- ethtool:
- rss: avoid modifying the RSS context response
- module: avoid leaking a netdev ref on module flash errors
- coalesce: cap profile updates at NET_DIM_PARAMS_NUM_PROFILES
- netfilter: fix dst corruption in same register operation
- nfc: hci: fix out-of-bounds read in HCP header parsing
- ipv6: exthdrs: refresh nh pointer after ipv6_hop_jumbo()
- eth:
- vti: use ip6_tnl.net in vti6_changelink().
- vxlan: do not reuse cached ip_hdr() value after
skb_tunnel_check_pmtu()"
* tag 'net-7.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (94 commits)
dpll: zl3073x: make frequency monitor a per-device attribute
dpll: zl3073x: use __dpll_device_change_ntf() and remove change_work
dpll: export __dpll_device_change_ntf() for use under dpll_lock
net/handshake: Drain pending requests at net namespace exit
net/handshake: Verify file-reference balance in submit paths
net/handshake: Close the submit-side sock_hold race
net/handshake: hand off the pinned file reference to accept_doit
net/handshake: Take a long-lived file reference at submit
net/handshake: Pass negative errno through handshake_complete()
nvme-tcp: store negative errno in queue->tls_err
net/handshake: Use spin_lock_bh for hn_lock
net: skbuff: fix missing zerocopy reference in pskb_carve helpers
net: hibmcge: move dma_rmb() after dma_sync_single_for_cpu() in RX path
net: hibmcge: disable Relaxed Ordering to fix RX packet corruption
selftests/tc-testing: Add netem test case exercising loops
selftests/tc-testing: Add mirred test cases exercising loops
net/sched: act_mirred: Fix return code in early mirred redirect error paths
net/sched: act_mirred: Fix blockcast recursion bypass leading to stack overflow
net/sched: Fix ethx:ingress -> ethy:egress -> ethx:ingress mirred loop
net/sched: fix packet loop on netem when duplicate is on
...
scx_show_state.py still reads scx_aborting and scx_bypass_depth as
global symbols. Those symbols no longer exist after the state was moved
into struct scx_sched, so the drgn script fails when it reaches either
field.
Read aborting and bypass_depth from scx_root instead. This preserves the
script's current root-scheduler view: with sub-scheduler support, the
reported values are for the root scheduler and sub-schedulers are not
enumerated.
Fixes: 5c8d98a1b4 ("sched_ext: Move bypass state into scx_sched")
Fixes: c1743da43c ("sched_ext: Move aborting flag to per-scheduler field")
Signed-off-by: Zicheng Qu <quzicheng@huawei.com>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
When sibling CPU exclusion occurs, a partition's effective_xcpus may be
a subset of its user_xcpus. The partcmd_update path must use
effective_xcpus instead of user_xcpus when calculating CPUs to return
to or request from the parent.
Add two test cases to verify this behavior:
1) Narrowing cpuset.cpus to only the sibling-excluded CPUs should not
return CPUs to parent that the partition never actually owned.
2) Expanding cpuset.cpus after a sibling becomes a member should
correctly request the additional CPUs from parent.
Co-developed-by: Zhang Guopeng <zhangguopeng@kylinos.cn>
Signed-off-by: Zhang Guopeng <zhangguopeng@kylinos.cn>
Signed-off-by: Sun Shaojie <sunshaojie@kylinos.cn>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Add a test that exercises nested page fault injection during L2
execution. L2 executes I/O string instructions (OUTSB/INSB) that access
memory restricted in L1's nested page tables (NPT/EPT), triggering a
nested page fault that L0 must inject to L1.
The test supports both AMD SVM (NPF) and Intel VMX (EPT violation) and
verifies that:
- The exit reason is an NPF/EPT violation
- The access type and permission bits are correct
- The faulting GPA is correct
Three test cases are implemented:
- Unmap the final data page (final translation fault, OUTSB read)
- Unmap a PT page (page walk fault, OUTSB read)
- Write-protect the final data page (protection violation, INSB write)
- Write-protect a PT page (protection violation on A/D update, OUTSB
read)
Signed-off-by: Kevin Cheng <chengkev@google.com>
[sean: name it nested_tdp_fault_test, consolidate asserts]
Link: https://patch.msgid.link/20260522232701.3671446-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
