The ASUS Vivobook 18 M1807GA (AMD ACP7.x, PCI 1022:15e2, subsystem
1043:3531) exposes a single Realtek RT721 SDCA codec on SoundWire link 1.
The BIOS reports the ACP audio config flag as 0 (SoundWire mode), so
snd_pci_ps claims the device, brings up the SoundWire managers and
enumerates the RT721 peripheral (sdw:0:1:025d:0721:01); the rt721-sdca
codec driver binds successfully.
No sound card is created, however: acp63_sdw_machine_select() walks
snd_soc_acpi_amd_acp70_sdw_machines[] and finds no entry whose declared
SoundWire peripherals are all present on the bus. The only existing RT721
entry, acp70_rt721_l1u0_tas2783x2_l1u8b, additionally requires two
TAS2783 amplifiers and deliberately exposes the RT721 as jack + DMIC
only. This M1807GA variant has no external amplifiers - the RT721's
internal AIF2 amplifier path drives the speakers - so that entry never
matches and no machine device is registered.
Add a standalone RT721 machine entry for link 1 exposing all three RT721
endpoints (jack/AIF1, speaker amplifier/AIF2, DMIC/AIF3), mirroring the
standalone RT722 configuration. Place it after the TAS2783 combo entry so
platforms that do have the external amplifiers continue to match the more
specific entry first.
ACPI _ADR of the codec: 0x000130025D072101
(link_id=1 version=3 mfg_id=0x025d Realtek part_id=0x0721 class=0x01).
Verified on the hardware: with the entry present the amd_sdw machine
binds, an "amd-soundwire" card is registered exposing the rt721-sdca
AIF1 (SimpleJack) and AIF2 (SmartAmp) PCM devices, and audio plays out
of the built-in speakers.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221282
Signed-off-by: Aleksander Pshenitsyn <brains.fatman@gmail.com>
Link: https://patch.msgid.link/20260531101159.14241-1-brains.fatman@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The MSI Raider A18 HX A9WJG has an internal digital microphone
connected through AMD ACP6x, but this machine does not expose the
AcpDmicConnected ACPI property, so acp_yc_mach does not bind.
Add a DMI quirk for this model.
This was tested on an MSI Raider A18 HX A9WJG with board MS-182L,
BIOS E182LAMS.31A, AMD ACP6x rev 0x62, and Realtek ALC274. After
applying the quirk, the internal microphone appears as an acp6x DMIC
capture device and records correctly.
Signed-off-by: David Glushkov <david.glushkov@sntiq.com>
Link: https://patch.msgid.link/20260531214512.170716-1-david.glushkov@sntiq.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When configuring 32 slots TDM (channels == slots == 32), the xMR
(Mask Register) write used:
~0UL - ((1 << min(channels, slots)) - 1)
The literal "1" is a signed 32-bit int. Shifting it by 32 positions is
undefined behaviour which may set this register to 0xFFFFFFFF, masking
all 32 slots.
Use GENMASK_U32() macro instead. For 32 slots this produces a zero mask:
~GENMASK_U32(31, 0) = ~0xFFFFFFFF = 0x00000000
Behaviour for fewer than 32 slots is unchanged.
Fixes: 770f58d7d2 ("ASoC: fsl_sai: Support multiple data channel enable bits")
Cc: stable@vger.kernel.org
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Reviewed-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://patch.msgid.link/20260601083327.1535185-1-chancel.liu@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The MSI Bravo 17 C7VF routes its internal digital microphone through
the ACP6x. The machine driver only enables the DMIC for boards present
in the DMI quirk table, so on this model the internal mic is never
detected and no capture device is created.
Add a quirk entry matching the board's DMI identifiers so the DMIC is
enabled and the internal microphone works.
Signed-off-by: João Miguel <jmiguel.ghp@gmail.com>
Link: https://patch.msgid.link/20260523213548.5219-1-jmiguel.ghp@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Lenovo Yoga Pro 7 15ASH11 with AMD RYZEN AI MAX+ 388 (Strix Halo, ACP
7.0) uses Realtek ALC287 series codec and no any DMIC connected by ACP.
All DMICs directly connet with ALC codec.
Without this quirk, Input Device of Gnome Sound settings shows Internal
Stereo Microphone and Digital Microphone by default. In fact, Digital
Microphone of ACP doesn't work due to no connecting with ALC287 codec,
the Internal Stereo Microphone as analog device based on snd_hda_intel
driver can work well.
Add a DMI quirk to override the flag to 0, consistent with the existing
entry for the HN7306EA.
Signed-off-by: Jackie Dong <xy-jackie@139.com>
Link: https://patch.msgid.link/20260527102005.58528-1-xy-jackie@139.com
Signed-off-by: Mark Brown <broonie@kernel.org>
simple_mux_control_put() rejects values greater than e->items, but
enum control values are zero based. For the two-entry mux used by this
driver, valid values are 0 and 1, so value 2 must be rejected as well.
Accepting e->items can store an invalid mux state, pass it to the GPIO
setter, and pass it on to the DAPM mux update path where it is used as
an index into the enum text array.
Use the same >= e->items check used by the ASoC enum helpers.
Fixes: 342fbb7578 ("ASoC: add simple-mux")
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260527-asoc-simple-mux-enum-bounds-v1-1-3f805b9fc671@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com> says:
Here is the set of patches, that fixes one of the isssue reported by
Richard Acayan, while doing fix for the reported issue, found various
other issues in the existing code.
This set contains some of those cleanups along with few trivial coding
style patches which looked uncomfortable to read.
Patch 1 should be enough to fix the issue reported.
Tested this is on UNO-Q.
Link: https://patch.msgid.link/20260518092347.3446946-1-srinivas.kandagatla@oss.qualcomm.com
q6asm_dai_close() and q6asm_dai_compr_free() currently issue CMD_CLOSE
whenever prtd->state is non-zero.
After prepare() closes an existing stream, the state is updated to
Q6ASM_STREAM_STOPPED. Since this state is also non-zero, the close and
free paths can send CMD_CLOSE again for a stream that has already been
closed.
Restrict CMD_CLOSE to the Q6ASM_STREAM_RUNNING state so the command is
sent only when the ASM stream is still active.
Fixes: 2a9e92d371 ("ASoC: qdsp6: q6asm: Add q6asm dai driver")
Cc: Stable@vger.kernel.org
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260518092347.3446946-3-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The q6asm-dai stream state is used by prepare() to decide whether an
existing stream setup needs to be closed before opening/configuring a new
one. Updating the state from trigger or asynchronous DSP callbacks can make
that state stale or incorrect relative to the actual setup lifetime.
In particular, setting Q6ASM_STREAM_STOPPED on STOP or EOS completion can
make prepare() believe there is no active setup to close, which can result
in opening/configuring the same stream more than once.
Keep stream state updates tied to prepare(), where the stream is actually
closed and reopened, and stop changing it from trigger and EOS callbacks.
Fixes: bfbb12dfa1 ("ASoC: qcom: q6asm-dai: perform correct state check before closing")
Cc: Stable@vger.kernel.org
Closes: https://lore.kernel.org/all/afS7rTHdc9TyIeLx@rdacayan/
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260518092347.3446946-2-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
byt_cht_es8316_init() enables MCLK before configuring the codec sysclk
and creating the headset jack. If either of those later steps fails, the
function returns without disabling MCLK, leaving the clock enabled after
card registration fails.
Track whether this driver enabled MCLK and disable it on the init error
paths. Add the matching DAI link exit callback so the same clock enable
is also balanced when ASoC cleans up a successfully initialized link.
Fixes: a03bdaa565 ("ASoC: Intel: add machine driver for BYT/CHT + ES8316")
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260519-asoc-bytcht-es8316-mclk-leak-v1-1-b4a11cdc2afd@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For PTL onwards Cirrus are intending to rely on function topologies,
rather than using a match table for each system type. Remove this
unnecessary match table entry. Having the match entries can
mean that systems match when they should use function topologies
instead, resulting in incorrect audio configurations. Although,
admittedly this is not too likely with this 6x amp configuration
as those are quite rare, but best to follow best practice.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260520163631.3300102-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For PTL onwards Cirrus are intending to rely on function
topologies, rather than using a match table for each system
type. Chrome systems tend to have custom magic in the topology
and thus need to load a specific file. This causes problems as
these system can have the same layout as generic laptops causing
the match to apply to other laptops. Add a DMI quirk that forces
these matches to only apply to specific devices.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260520163631.3300102-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rewrite cs_amp_create_debugfs() so that dput() will be called on
a valid dentry returned from debugfs_lookup().
The pointer returned from debugfs_lookup() must be released by dput().
The pointer returned from debugfs_create_dir() does not need to be
passed to dput().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: cdd27fa329 ("ASoC: cs-amp-lib: Add helpers for factory calibration")
Link: https://patch.msgid.link/20260521122511.987322-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When calculating data->count replace the incorrect sizeof(data) with use
of struct_offset().
The faulty sizeof(data) was incorrectly calculating the size of the
pointer instead of the size of the struct pointed to. As it happens, both
values are 8 on a 64-bit CPU. In the unlikely event of using this code on
a 32-bit CPU the number of available bytes would be calculated 4 larger
than is actually available.
Instead of changing to sizeof(*data) it has been replaced by
struct_offset() because it has better chance of detecting these sorts of
typos. Also the offset of the data[] array is actually what we want to know
here anyway.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 2b62e66626 ("ASoC: cs-amp-lib: Add function to write calibration to UEFI")
Link: https://patch.msgid.link/20260521122511.987322-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use flush_work() instead of cancel_work_sync() to terminate pending IRQ
work in cs35l56_sdw_remove(). And flush_work() again after masking the
interrupts to flush any queueing that was racing with the masking. This is
the same sequence as cs35l56_sdw_system_suspend().
cs35l56_sdw_interrupt() takes the pm_runtime to prevent the bus powering-
down before the interrupt status can be read and handled. The work releases
this pm_runtime. So cancelling it, instead of flushing, could leave an
unbalanced pm_runtime.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Link: https://patch.msgid.link/20260521123057.988732-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the SAI peripheral is left in a running state by the bootloader,
the driver can experience an interrupt storm during probe that prevents
successful initialization. This occurs because the current code registers
the IRQ handler before resetting the hardware to a known state.
The issue manifests as:
- Continuous interrupts firing immediately after devm_request_irq()
- Driver probe failure or system hang
- Error messages about unhandled interrupts
This is particularly problematic on systems where U-Boot or other
bootloaders enable SAI for boot-time audio feedback or diagnostics
and don't properly disable it before handing control to Linux.
Fix this by reordering the probe sequence:
1. Add fsl_sai_reset_hw() to clear TCSR/RCSR control registers,
which disables the transmitter/receiver and all interrupt sources
2. Move devm_request_irq() to after hardware initialization
This ensures the SAI is in a clean reset state before the interrupt
handler can be invoked, preventing the storm while maintaining proper
error handling and cleanup paths.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20260512065252.75859-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASUS Zenbook S16 (UM5606GA) with AMD Ryzen AI 9 465 (Strix Point,
ACP 7.0) has a BIOS that incorrectly sets the ACPI property
'acp-audio-config-flag' to 0x10 (FLAG_AMD_LEGACY_ONLY_DMIC) for the ACP
device. This prevents snd_pci_ps from probing the SoundWire bus, resulting
in no internal audio (dummy output only).
The hardware uses a Cirrus Logic CS42L43 (headphone/jack) and four CS35L56
smart amplifiers (speakers), all on SoundWire link 1. The corresponding
machine table entry (acp70_cs42l43_l1u0_cs35l56x4_l1u0123) already exists
in amd-acp70-acpi-match.c and correctly describes this topology.
Add a DMI quirk to override the flag to 0, consistent with the existing
entry for the HN7306EA.
Signed-off-by: Jasper Smet <josbeir@gmail.com>
Link: https://patch.msgid.link/20260513052137.56703-1-josbeir@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some Old DSP firmware versions use 32-bit address arithmetic and size for
validating the PCM buffer address range. If a buffer is allocated near
the top of the 32-bit address space, arithmetic calculations involving
the end address can overflow and fail checks.
Work around this by increasing the preallocated PCM buffer size by one
page. The DSP is still passed the usable buffer size, excluding the extra
page, which prevents the firmware from seeing an end address that crosses
the 32-bit boundary.
This was not hit before because PCM buffer allocation and DSP-side
mapping happened at different points, and the size mapped on the DSP was
usually nperiods * period_size. Therefore the mapped size was unlikely to
match the full preallocated buffer size exactly, although the issue was
still possible. With early buffer mapping on the DSP, the full
preallocated buffer is mapped during PCM creation, making the failure
reproducible at boot.
Fixes: 8ea6e25c85 ("ASoC: qcom: q6apm: Add support for early buffer mapping on DSP")
Cc: Stable@vger.kernel.org
Reported-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Closes: https://lore.kernel.org/all/7f10abbd-fb78-4c3a-ab90-7ca78239891a@oldschoolsolutions.biz/
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Link: https://patch.msgid.link/20260514090607.2435484-1-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In fs210x_effect_scene_info(), a string was copied like this:
strscpy(DST, SRC, strlen(SRC) + 1);
A buffer overflow would happen if strlen(SRC) >= sizeof(DST).
Actually, strscpy() must be used this way:
strscpy(DST, SRC, sizeof(DST));
strscpy(DST, SRC); // defaults to sizeof(DST)
Fixes: 7561177017 ("ASoC: codecs: Add FourSemi FS2104/5S audio amplifier driver")
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://patch.msgid.link/20260513190852.196723-2-grandmaster@al2klimov.de
Signed-off-by: Mark Brown <broonie@kernel.org>
clk_get_parent() returns NULL when the clock has no parent (or when the
input clk is NULL); it never returns an ERR_PTR. The current IS_ERR(mux)
check therefore never triggers - a NULL return falls through silently
to clk_set_parent(NULL, parent_clk), which simply fails with -EINVAL.
Use a NULL check so the dedicated error path runs and the prior
clk_get() reference is released via clk_put().
Signed-off-by: Ingyu Jang <ingyujang25@korea.ac.kr>
Acked-by: Sen Wang <sen@ti.com>
Link: https://patch.msgid.link/20260514185215.3753998-1-ingyujang25@korea.ac.kr
Signed-off-by: Mark Brown <broonie@kernel.org>
devm_kasprintf() can fail while building the temporary speaker
component string. If that happens, spk_components is set to NULL, but
the current code can still pass it to strlen() on a later loop iteration
or after the loop when appending the speaker component list to
card->components.
Use NULL to represent the initial "no speaker components" state, and
return -ENOMEM immediately if building spk_components fails.
Fixes: 0f60ecffbf ("ASoC: sdw_utils: generate combined spk components string")
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260512-asoc-sdw-utils-spk-components-alloc-v1-1-c9bbd6d2e123@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The smn_read_register() helper returns negative error codes on failure
or the register value on success. When used with read_poll_timeout(),
the return value is stored in the 'data' variable.
Currently 'data' is declared as u32, which causes negative error codes
to be cast to large positive values. This makes the condition 'data > 0'
incorrectly treat errors as success.
Fix by changing 'data' from u32 to int, matching the pattern used in
psp_mbox_ready() which correctly handles the same helper function.
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/linux-sound/agGES8vWrLOrBu28@stanley.mountain/
Fixes: f120cf33d2 ("ASoC: SOF: amd: Use AMD_NODE")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260511153638.724810-1-mario.limonciello@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a SoundWire machine table entry for the LG Gram Pro 2026
(16Z90U-KU7BK), which has an unusual configuration:
sdw:0:1:025d:1320:01 single stereo RT1320 SmartAmp on link 1
sdw:0:3:025d:0713:01 RT713 jack/headset codec on link 3
Existing rt713-rt1320 boards have two RT1320 amps on different links
("link_mask = BIT(1) | BIT(2) | BIT(3)"). The LG Gram uses a single
stereo RT1320 chip, so the new entry uses "link_mask = BIT(1) |
BIT(3)" with the existing rt1320_1_group2_adr structure, leaving the
two-channel routing to the topology.
The RT713 on this board does not expose a SMART_MIC function in
ACPI, so the .machine_check callback used by the existing entries
(snd_soc_acpi_intel_sdca_is_device_rt712_vb) would reject this
board. Drop machine_check for the new entry; speaker output and
the headset jack do not depend on the SMART_MIC presence check.
The corresponding topology source has been submitted to the SOF
project at https://github.com/thesofproject/sof/pull/10760 . The
generated sof-ptl-rt713-l3-rt1320-l1-2ch.tplg and
nhlt-sof-ptl-rt713-l3-rt1320-l1.bin will follow in linux-firmware
once that lands.
Tested on Ubuntu 26.04 with kernel 7.0.0-15: speaker (RT1320
stereo), headphone jack with auto-routing, headset mic, and the
internal NHLT DMIC array all work via the UCM HiFi profile.
Signed-off-by: Jang Pyohwan <vhgksl@daum.net>
Link: https://patch.msgid.link/20260509175317.DnhjxHczQay7kkp5z6t4lg@vhgksl.daum.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Richard Fitzgerald <rf@opensource.cirrus.com> says:
Two patches to fix cleanup during driver remove() and the error path
of probe().
The main purpose is to fix cleanup of the workqueue.
Manually call snd_soc_unregister_component() from cs35l56_remove()
instead of using devres cleanup. This ensures that the component is
destroyed before cs35l56_remove() starts cleanup of anything the
component code could be using.
Devres cleanup happens after the driver remove() callback, so if
snd_soc_register_component() is used, it will not be destroyed until
after cs35l56_remove() has returned. But there is some cleanup that
must be done in cs35l56_remove(), or wrapped in a custom devres
cleanup handler to ensure correct ordering. The simplest option is
to call snd_soc_unregister_component() at the start of cs35l56_remove().
Fixes: e496112529 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
Closes: https://sashiko.dev/#/patchset/20260501103002.2843735-1-rf%40opensource.cirrus.com
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260505161124.3621000-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In wm_adsp_fw_find_test_find_firmware_byindex() the content of
priv->searched_fw_files must be cleared before starting the next iteration.
The files searched for are appended to priv->searched_fw_files, so if it is
not cleared on each iteration it will still contain the searches from the
previous iteration.
Fixes: bf2d44d07d ("ASoC: wm_adsp: Add kunit test for firmware file search")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260505105123.3539778-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Redirect wm_adsp_release_firmware_files() to a replacement function that
handles the dummy firmware created by the tests. Use the same cleanup
function to cleanup in the test exit() function. Also call it on each
loop in wm_adsp_fw_find_test_find_firmware_byindex() to free the created
strings before reusing priv->found_fw on the next loop.
wm_adsp_release_firmware_files() will pass the struct firmware* pointers
to release_firmware(). But the pointers created by the tests are dummies
and must not be passed to release_firmware().
The test never invokes wm_adsp_release_firmware_files() so it wasn't
redirected. But the error handling in wm_adsp_request_firmware_files()
calls wm_adsp_release_firmware_files(). The redirected function makes
this safe.
Using the same cleanup function to perform cleanup from the test exit()
handler and wm_adsp_fw_find_test_find_firmware_byindex() avoids the risk
of duplicate cleanup code that all needs updating if there is any change
to the cleanup requirements.
This problem was found by https://sashiko.dev.
Fixes: bf2d44d07d ("ASoC: wm_adsp: Add kunit test for firmware file search")
Closes: https://sashiko.dev/#/patchset/20260326100853.1582886-1-rf%40opensource.cirrus.com
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260505105123.3539778-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
TAS2770 initialises the temperature readout registers to 0.
This value persists until the chip is fully powered up and
the ADC starts sampling. The ADC then persists the last sampled
temperature during software shutdown.
The ADC should therefore never return 0 in normal operating
conditions, so return -ENODATA and mark it as a fault condition
using HWMON_T_FAULT.
Fixes: ff73e27801 ("ASoC: tas2770: expose die temp to hwmon")
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The TAS2764 datasheet specifies that the chip initialises the
temperature register such that the temperature reading is 2.6 *C,
ostensibly to prevent tripping the chip's protection circuitry.
The chip is not capable of representing 2.6 *C however, and the
register is actually initialised to 0. The ADC does not start
sampling until the chip is powered up, and the last sampled
temperature persists in the register during software shutdown.
Therefore, any reading returning 0 is almost certain to be
from before the ADC has actually started sampling, meaning that
it is invalid.
Return -ENODATA early if the temperature has not yet been sampled
by the chip, and indicate a fault condition using HWMON_T_FAULT.
Fixes: 186dfc85f9 ("ASoC: tas2764: expose die temp to hwmon")
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
ALSA controls should return 1 from a put callback when the control
value changes. fsl_xcvr_capds_put() and fsl_xcvr_tx_cs_put() both
update cached control data but always return 0, so ALSA suppresses
change notifications for the Capabilities Data Structure and playback
IEC958 channel status controls.
Compare the old and new cached values before copying the new data,
and return whether the control value changed.
Fixes: 2856448686 ("ASoC: fsl_xcvr: Add XCVR ASoC CPU DAI driver")
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260428-asoc-fsl-xcvr-event-generation-v1-1-f21cf0812c4f@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
