The pending irq work might be still floating while the assigned stream
has been already closed, which may lead to UAF, especially when
another async work for fasync is involved.
For addressing this, extend the hda_controller_ops for allowing the
extra cleanup procedure that is specific to the controller driver, and
make sure to cancel and sync the pending irq work at each PCM close
before releasing the resources.
Reported-by: Jake Lamberson <lamberson.jake@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260519121157.28477-2-tiwai@suse.de
Currently, the delayed IRQ handling for PCM streams is managed in a
single work embedded in hda_intel, but this is basically a per-stream
thing. Due to the single work, we can't cancel the work properly at
closing each stream, for example.
For making the IRQ pending work to be stream-based, this patch changes
the following:
- An extended version of azx_dev (i.e. the hd-audio stream object) is
defined for snd-hda-intel
- The irq_pending flag and irq_pending_work are moved to
hda_intel_stream, so that they can be hda-intel stream specific
- The stream creation and assignment are refactored so that
snd-hda-intel can handle individually;
the snd-hda-intel specific workaround for stream tags is also moved
to snd-hda-intel itself instead of the common code
- The irq pending work is canceled properly at free / shutdown
While we're at it, changed the bit field flag to bool, as the bit
field doesn't help much in our case.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260519121157.28477-1-tiwai@suse.de
The hda-intel driver uses request_firmware_nowait() for loading its
patch, and tries to continue the probe directly from the fw loader
callback. This works in principle, but it has a few drawbacks:
- The driver may be released before the firmware callback completes
- Having two ways of async probe makes the code flow unnecessarily
complex
The former issue is more severe, as it may potentially lead to a UAF,
and there is no explicit way to cancel the pending firmware worker
for now.
This patch changes the firmware loading to be performed rather in the
common probe work without *_nowait(). Then the pending work can be
easily canceled, and the code becomes more straightforward.
A nice bonus is that, by moving into the probe work, the firmware
doesn't need any longer to be cached, hence we can get rid of struct
azx.fw field, and release the firmware immediately after parsing it,
too.
Fixes: 5cb543dba9 ("ALSA: hda - Deferred probing with request_firmware_nowait()")
Link: https://patch.msgid.link/20260415135526.1813126-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit ab949d5196 ("ALSA: hda - Fix deadlock of controller device
lock at unbinding") added a temporary device_unlock()/device_lock()
pair around probe-work cancellation to avoid a deadlock between
controller unbind and codec probe.
That deadlock depended on the driver core taking both a device lock and
its parent lock during bind and unbind. Since commit 8c97a46af0
("driver core: hold dev's parent lock when needed") and follow-up
fixes, the parent lock is only taken when bus->need_parent_lock is set.
The HDA bus does not set that flag, so codec binding no longer locks
the controller device as the codec's parent.
Keep cancel_delayed_work_sync(), since the async probe/remove race
still needs to be serialized, but drop the stale unlock/relock
workaround and its outdated FIXME comment. Keeping it around only
opens an unnecessary unlocked window inside azx_remove().
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260328-hda-intel-drop-obsolete-probe-workaround-v1-1-bc43aeafc98b@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This motherboard uses USB audio instead, causing this driver to complain
about "no codecs found!".
Add it to the denylist to silence the warning.
The first attempt only matched on the PCI device, but this caused issues
for some laptops, so DMI match against the board as well.
Signed-off-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Link: https://patch.msgid.link/20260327155737.21818-2-stuart.a.hayhurst@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The default bdl_pos_adj of 32 for Nvidia HDA controllers is
insufficient on GA102 (and likely other recent Nvidia GPUs) after S3
suspend/resume. The controller's DMA timing degrades after resume,
causing premature IRQ detection in azx_position_ok() which results in
silent HDMI/DP audio output despite userspace reporting a valid
playback state and correct ELD data.
Increase bdl_pos_adj to 64 for AZX_DRIVER_NVIDIA, matching the value
already used by Intel Apollo Lake for the same class of timing issue.
Cc: stable@vger.kernel.org
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221069
Suggested-by: Charalampos Mitrodimas <charmitro@posteo.net>
Signed-off-by: Panagiotis Foliadis <pfoliadis@posteo.net>
Link: https://patch.msgid.link/20260225-nvidia-audio-fix-v1-1-b1383c37ec49@posteo.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull sound updates from Takashi Iwai:
"It's been relatively calm for a new era; majority of changes are for
ASoC, mostly device-specific changes, while there are a bit of
cleanups in core stuff. A few SPI API and regmap updates are included
to be used by sound drivers, too.
Core:
- A few trivial cleanups about __free() and runtime PM macros
- Convert to new snd_seq_bus binding
ASoC:
- Generic SDCA support for reporting jack events
- Continuing platform support, cleanup and feature improvements for
AMD, Intel, Qualcomm and SOF code
- Platform description improvements for the Cirrus drivers
- Support for NXP i.MX952, Realtek RT1320 and RT5575, and Sophogo
CV1800B
HD- and USB-audio:
- Many quirks as usual"
* tag 'sound-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (341 commits)
ALSA: usb-audio: Add DSD support for iBasso DC04U
ALSA: mixer: oss: Add card disconnect checkpoints
ASoC: SOF: ipc4-control: Set correct error code in refresh_bytes_control
ASoC: SOF: Intel: select CONFIG_SND_HDA_EXT_CORE from SND_SOC_SOF_HDA_COMMON
ALSA: usb-audio: Add iface reset and delay quirk for AB13X USB Audio
ASoC: amd: maintainer information
ALSA: ctxfi: Add quirk for SE-300PCIE variant (160b:0102)
ALSA: hda/generic: fix typos in comments
ALSA: hda/realtek - Enable mute LEDs on HP ENVY x360 15-es0xxx
ALSA: hda/conexant: Add quirk for HP ZBook Studio G4
ASoC: fsl_asrc_dma: allocate memory from dma device
ASoC: fsl_asrc: Add support for i.MX952 platform
ASoC: fsl_asrc_m2m: Add option to start ASRC before DMA device for M2M
ASoC: dt-bindings: fsl,imx-asrc: Add support for i.MX952 platform
ALSA: oss: delete self assignment
ASoC: rockchip: spdif: Convert to FIELD_PREP
ASoC: rockchip: spdif: Fill IEC958 CS info per params
ASoC: rockchip: spdif: Add support for format S32_LE
ASoC: rockchip: spdif: Add support for set mclk rate
ASoC: rockchip: spdif: Swap PCM and DAI component registration order
...
Pull MSI updates from Thomas Gleixner:
"Updates for the [PCI] MSI subsystem:
- Add interrupt redirection infrastructure
Some PCI controllers use a single demultiplexing interrupt for the
MSI interrupts of subordinate devices.
This prevents setting the interrupt affinity of device interrupts,
which causes device interrupts to be delivered to a single CPU.
That obviously is counterproductive for multi-queue devices and
interrupt balancing.
To work around this limitation the new infrastructure installs a
dummy irq_set_affinity() callback which captures the affinity mask
and picks a redirection target CPU out of the mask.
When the PCI controller demultiplexes the interrupts it invokes a
new handling function in the core, which either runs the interrupt
handler in the context of the target CPU or delegates it to
irq_work on the target CPU.
- Utilize the interrupt redirection mechanism in the PCI DWC host
controller driver.
This allows affinity control for the subordinate device MSI
interrupts instead of being randomly executed on the CPU which runs
the demultiplex handler.
- Replace the binary 64-bit MSI flag with a DMA mask
Some PCI devices have PCI_MSI_FLAGS_64BIT in the MSI capability,
but implement less than 64 address bits. This breaks on platforms
where such a device is assigned an MSI address higher than what's
supported.
With the binary 64-bit flag there is no other choice than disabling
64-bit MSI support which leaves the device disfunctional.
By using a DMA mask the address limit of a device can be described
correctly which provides support for the above scenario.
- Make use of the DMA mask based address limit in the hda/intel and
radeon drivers to enable them on affected platforms
- The usual small cleanups and improvements"
* tag 'irq-msi-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ALSA: hda/intel: Make MSI address limit based on the device DMA limit
drm/radeon: Make MSI address limit based on the device DMA limit
PCI/MSI: Check the device specific address mask in msi_verify_entries()
PCI/MSI: Convert the boolean no_64bit_msi flag to a DMA address mask
genirq/redirect: Prevent writing MSI message on affinity change
PCI/MSI: Unmap MSI-X region on error
genirq: Update effective affinity for redirected interrupts
PCI: dwc: Enable MSI affinity support
PCI: dwc: Code cleanup
genirq: Add interrupt redirection infrastructure
genirq/msi: Correct kernel-doc in <linux/msi.h>
ASoC: Updates for v7.0
This release is almost all abut driers, there's very little core work
here, although some of that driver work is in more generic areas like
SDCA and SOF:
- Generic SDCA support for reporting jack events.
- Continuing platform support, cleanup and feature improements for the
AMD, Intel, Qualcomm and SOF code.
- Platform description improvements for the Cirrus drivers.
- Support for NXP i.MX952, Realtek RT1320 and RT5575, and Sophogo
CV1800B.
We also pulled in one small SPI API update and some more substantial
regmap work (cache description improvements) for use in drivers.
The hda/intel driver restricts the MSI message address for devices which do
not advertise full 64-bit DMA address space support to 32-bit due to the
former restrictions of the PCI/MSI code which only allowed either 32-bit or
a full 64-bit address range.
This does not work on platforms which have a MSI doorbell address above the
32-bit boundary but do not support the full 64 bit address range.
The PCI/MSI core converted this binary decision to a DMA_BIT_MASK() based
decision, which allows to describe the device limitations precisely.
Convert the driver to provide the exact DMA address limitations to the
PCI/MSI core. That allows devices which do not support the full 64-bit
address space to work on platforms which have a MSI doorbell address above
the 32-bit limit as long as it is within the hardware's addressable range.
[ tglx: Massage changelog ]
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260129-pci-msi-addr-mask-v4-4-70da998f2750@iscas.ac.cn
Some PCI devices have PCI_MSI_FLAGS_64BIT in the MSI capability, but
implement less than 64 address bits. This breaks on platforms where such
a device is assigned an MSI address higher than what's supported.
Currently, no_64bit_msi bit is set for these devices, meaning that only
32-bit MSI addresses are allowed for them. However, on some platforms the
MSI doorbell address is above the 32-bit limit but within the addressable
range of the device.
As a first step to enable MSI on those combinations of devices and
platforms, convert the boolean no_64bit_msi flag to a DMA mask and fixup
the affected usage sites:
- no_64bit_msi = 1 -> msi_addr_mask = DMA_BIT_MASK(32)
- no_64bit_msi = 0 -> msi_addr_mask = DMA_BIT_MASK(64)
- if (no_64bit_msi) -> if (msi_addr_mask < DMA_BIT_MASK(64))
Since no values other than DMA_BIT_MASK(32) and DMA_BIT_MASK(64) are used,
this is functionally equivalent.
This prepares for changing the binary decision between 32 and 64 bit to a
DMA mask based decision which allows to support systems which have a DMA
address space less than 64bit but a MSI doorbell address above the 32-bit
limit.
[ tglx: Massaged changelog ]
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Brett Creeley <brett.creeley@amd.com> # ionic
Reviewed-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Takashi Iwai <tiwai@suse.de> # sound
Link: https://patch.msgid.link/20260129-pci-msi-addr-mask-v4-1-70da998f2750@iscas.ac.cn
Merge series from Cristian Ciocaltea <cristian.ciocaltea@collabora.com>:
This series provides several fixes and cleanup patches for the Nuvoton
NAU88L21 audio codec driver.
Testing and validation has been performed on Valve Steam Deck.
When building without CONFIG_PM_SLEEP, there are several warnings (or
errors with CONFIG_WERROR=y / W=e) from the cix-ipbloq driver:
sound/hda/controllers/cix-ipbloq.c:378:12: error: 'cix_ipbloq_hda_runtime_resume' defined but not used [-Werror=unused-function]
378 | static int cix_ipbloq_hda_runtime_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/hda/controllers/cix-ipbloq.c:362:12: error: 'cix_ipbloq_hda_runtime_suspend' defined but not used [-Werror=unused-function]
362 | static int cix_ipbloq_hda_runtime_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/hda/controllers/cix-ipbloq.c:349:12: error: 'cix_ipbloq_hda_resume' defined but not used [-Werror=unused-function]
349 | static int cix_ipbloq_hda_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~
sound/hda/controllers/cix-ipbloq.c:336:12: error: 'cix_ipbloq_hda_suspend' defined but not used [-Werror=unused-function]
336 | static int cix_ipbloq_hda_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~
When CONFIG_PM and CONFIG_PM_SLEEP are unset, SET_SYSTEM_SLEEP_PM_OPS()
and SET_RUNTIME_PM_OPS() evaluate to nothing, so these functions appear
unused to the compiler in this configuration.
Use the modern SYSTEM_SLEEP_PM_OPS and RUNTIME_PM_OPS macros to resolve
these warnings, which is what they are intended to do. Additionally,
wrap &cix_ipbloq_hda_pm in pm_ptr() to ensure the compiler can drop the
entire structure when CONFIG_PM is unset.
Fixes: d91e9bd101 ("ALSA: hda: add CIX IPBLOQ HDA controller support")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20251211-hda-cix-ipbloq-modern-pm-ops-v1-1-c7a5580af021@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add CIX IPBLOQ HDA controller support, which is integrated into
CIX SKY1 audio subsystem. HDA controller supports 64bit, but the
audio subsystem can only 32bit transaction. Use jack polling mode
as there is a hardware issue, lead to interrupt strom if the RIRB
interrupt enabled. Host and hdac has different view of memory, so
need do dma address translation.
Signed-off-by: Joakim Zhang <joakim.zhang@cixtech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251205154621.3019640-4-joakim.zhang@cixtech.com
This motherboard uses USB audio instead, causing this driver to complain
about "no codecs found!".
Add it to the denylist to silence the warning.
Signed-off-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On a motherboard with an AMD Granite Ridge CPU there is a report
that 3.5mm microphone and headphones aren't working. In the
log it's observed:
snd_hda_intel 0000:02:00.6: Skipping the device on the denylist
This was because of commit df42ee7e22 ("ALSA: hda: Add ASRock
X670E Taichi to denylist"). Reverting this commit allows the
microphone and headphones to work again. As at least some combinations
of this motherboard do have applicable devices, revert so that they
can be probed.
Cc: Richard Gong <richard.gong@amd.com>
Cc: Juan Martinez <juan.martinez@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20250813140427.1577172-1-superm1@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Allow built-in drivers, not just modular drivers, to use async
initial probing (Lukas Wunner)
- Support Immediate Readiness even on devices with no PM Capability
(Sean Christopherson)
- Consolidate definition of PCIE_RESET_CONFIG_WAIT_MS (100ms), the
required delay between a reset and sending config requests to a
device (Niklas Cassel)
- Add pci_is_display() to check for "Display" base class and use it
in ALSA hda, vfio, vga_switcheroo, vt-d (Mario Limonciello)
- Allow 'isolated PCI functions' (multi-function devices without a
function 0) for LoongArch, similar to s390 and jailhouse (Huacai
Chen)
Power control:
- Add ability to enable optional slot clock for cases where the PCIe
host controller and the slot are supplied by different clocks
(Marek Vasut)
PCIe native device hotplug:
- Fix runtime PM ref imbalance on Hot-Plug Capable ports caused by
misinterpreting a config read failure after a device has been
removed (Lukas Wunner)
- Avoid creating a useless PCIe port service device for pciehp if the
slot is handled by the ACPI hotplug driver (Lukas Wunner)
- Ignore ACPI hotplug slots when calculating depth of pciehp hotplug
ports (Lukas Wunner)
Virtualization:
- Save VF resizable BAR state and restore it after reset (Michał
Winiarski)
- Allow IOV resources (VF BARs) to be resized (Michał Winiarski)
- Add pci_iov_vf_bar_set_size() so drivers can control VF BAR size
(Michał Winiarski)
Endpoint framework:
- Add RC-to-EP doorbell support using platform MSI controller,
including a test case (Frank Li)
- Allow BAR assignment via configfs so platforms have flexibility in
determining BAR usage (Jerome Brunet)
Native PCIe controller drivers:
- Convert amazon,al-alpine-v[23]-pcie, apm,xgene-pcie,
axis,artpec6-pcie, marvell,armada-3700-pcie, st,spear1340-pcie to
DT schema format (Rob Herring)
- Use dev_fwnode() instead of of_fwnode_handle() to remove OF
dependency in altera (fixes an unused variable), designware-host,
mediatek, mediatek-gen3, mobiveil, plda, xilinx, xilinx-dma,
xilinx-nwl (Jiri Slaby, Arnd Bergmann)
- Convert aardvark, altera, brcmstb, designware-host, iproc,
mediatek, mediatek-gen3, mobiveil, plda, rcar-host, vmd, xilinx,
xilinx-dma, xilinx-nwl from using pci_msi_create_irq_domain() to
using msi_create_parent_irq_domain() instead; this makes the
interrupt controller per-PCI device, allows dynamic allocation of
vectors after initialization, and allows support of IMS (Nam Cao)
APM X-Gene PCIe controller driver:
- Rewrite MSI handling to MSI CPU affinity, drop useless CPU hotplug
bits, use device-managed memory allocations, and clean things up
(Marc Zyngier)
- Probe xgene-msi as a standard platform driver rather than a
subsys_initcall (Marc Zyngier)
Broadcom STB PCIe controller driver:
- Add optional DT 'num-lanes' property and if present, use it to
override the Maximum Link Width advertised in Link Capabilities
(Jim Quinlan)
Cadence PCIe controller driver:
- Use PCIe Message routing types from the PCI core rather than
defining private ones (Hans Zhang)
Freescale i.MX6 PCIe controller driver:
- Add IMX8MQ_EP third 64-bit BAR in epc_features (Richard Zhu)
- Add IMX8MM_EP and IMX8MP_EP fixed 256-byte BAR 4 in epc_features
(Richard Zhu)
- Configure LUT for MSI/IOMMU in Endpoint mode so Root Complex can
trigger doorbel on Endpoint (Frank Li)
- Remove apps_reset (LTSSM_EN) from
imx_pcie_{assert,deassert}_core_reset(), which fixes a hotplug
regression on i.MX8MM (Richard Zhu)
- Delay Endpoint link start until configfs 'start' written (Richard
Zhu)
Intel VMD host bridge driver:
- Add Intel Panther Lake (PTL)-H/P/U Vendor ID (George D Sworo)
Qualcomm PCIe controller driver:
- Add DT binding and driver support for SA8255p, which supports ECAM
for Configuration Space access (Mayank Rana)
- Update DT binding and driver to describe PHYs and per-Root Port
resets in a Root Port stanza and deprecate describing them in the
host bridge; this makes it possible to support multiple Root Ports
in the future (Krishna Chaitanya Chundru)
- Add Qualcomm QCS615 to SM8150 DT binding (Ziyue Zhang)
- Add Qualcomm QCS8300 to SA8775p DT binding (Ziyue Zhang)
- Drop TBU and ref clocks from Qualcomm SM8150 and SC8180x DT
bindings (Konrad Dybcio)
- Document 'link_down' reset in Qualcomm SA8775P DT binding (Ziyue
Zhang)
- Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
(Niklas Cassel)
Rockchip PCIe controller driver:
- Drop unused PCIe Message routing and code definitions (Hans Zhang)
- Remove several unused header includes (Hans Zhang)
- Use standard PCIe config register definitions instead of
rockchip-specific redefinitions (Geraldo Nascimento)
- Set Target Link Speed to 5.0 GT/s before retraining so we have a
chance to train at a higher speed (Geraldo Nascimento)
Rockchip DesignWare PCIe controller driver:
- Prevent race between link training and register update via DBI by
inhibiting link training after hot reset and link down (Wilfred
Mallawa)
- Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
(Niklas Cassel)
Sophgo PCIe controller driver:
- Add DT binding and driver for Sophgo SG2044 PCIe controller driver
in Root Complex mode (Inochi Amaoto)
Synopsys DesignWare PCIe controller driver:
- Add required PCIE_RESET_CONFIG_WAIT_MS after waiting for Link up on
Ports that support > 5.0 GT/s. Slower Ports still rely on the
not-quite-correct PCIE_LINK_WAIT_SLEEP_MS 90ms default delay while
waiting for the Link (Niklas Cassel)"
* tag 'pci-v6.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits)
dt-bindings: PCI: qcom,pcie-sa8775p: Document 'link_down' reset
dt-bindings: PCI: Remove 83xx-512x-pci.txt
dt-bindings: PCI: Convert amazon,al-alpine-v[23]-pcie to DT schema
dt-bindings: PCI: Convert marvell,armada-3700-pcie to DT schema
dt-bindings: PCI: Convert apm,xgene-pcie to DT schema
dt-bindings: PCI: Convert axis,artpec6-pcie to DT schema
dt-bindings: PCI: Convert st,spear1340-pcie to DT schema
PCI: Move is_pciehp check out of pciehp_is_native()
PCI: pciehp: Use is_pciehp instead of is_hotplug_bridge
PCI/portdrv: Use is_pciehp instead of is_hotplug_bridge
PCI/ACPI: Fix runtime PM ref imbalance on Hot-Plug Capable ports
selftests: pci_endpoint: Add doorbell test case
misc: pci_endpoint_test: Add doorbell test case
PCI: endpoint: pci-epf-test: Add doorbell test support
PCI: endpoint: Add pci_epf_align_inbound_addr() helper for inbound address alignment
PCI: endpoint: pci-ep-msi: Add checks for MSI parent and mutability
PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
PCI: dwc: Add Sophgo SG2044 PCIe controller driver in Root Complex mode
PCI: vmd: Switch to msi_create_parent_irq_domain()
PCI: vmd: Convert to lock guards
...
Now HD-audio controller drivers are moved into sound/hda/controllers
directory as a part of HD-audio code reorganization. Most of drivers
are independent from PCI bus, hence it makes more sense to put under
sound/hda.
The hda_ prefix is dropped from most of files at moving, as it's
more or less superfluous.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250709160434.1859-6-tiwai@suse.de
