Pull MMC fixes from Ulf Hansson:
"MMC core:
- Fix host controller programming for eMMC fixed driver type
MMC host:
- dw_mmc-rockchip: Add missing private data for very old controllers
- litex_mmc: Fix clock management
- renesas_sdhi: Add OF entry for RZ/G2H SoC
- sdhci: Manage signal voltage switch during system resume for some hosts
- sdhci-of-dwcmshc: Fix reset, clk and SDIO support for Eswin EIC7700"
* tag 'mmc-v7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci: add signal voltage switch in sdhci_resume_host
mmc: dw_mmc-rockchip: Add missing private data for very old controllers
mmc: litex_mmc: Set mandatory idle clocks before CMD0
mmc: litex_mmc: Use DIV_ROUND_UP for more accurate clock calculation
mmc: renesas_sdhi: Add OF entry for RZ/G2H SoC
mmc: sdhci-of-dwcmshc: Fix reset, clk, and SDIO support for Eswin EIC7700
mmc: core: Fix host controller programming for fixed driver type
I met one suspend/resume issue with sdr104 capable sdio wifi card (with
"keep-power-in-suspend" set in DT property):
After resuming from suspend to ram, the sdio wifi card stops working.
Further debug shows that although ios shows the sdio card is at sdr104
mode, the voltage is still at 3V3. This is due to missing the calling
of ->start_signal_voltage_switch() in sdhci_resume_host().
Fix this issue by adding ->start_signal_voltage_switch() in
sdhci_resume_host(). This also matches what we do for
sdhci_runtime_resume_host().
Then the question is: why this issue hasn't reported and fixed for so
long time. IMHO, several reasons: Some host controllers just kick off
the runtime resume for system resume, so they benefit from the well
supported runtime pm code; Some platforms just use the old sdio wifi
card which doesn't need signal voltage switch at all, the default
voltage is 3v3 after resuming.
Fixes: 6308d2905b ("mmc: sdhci: add quirk for keeping card power during suspend")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
The really old controllers (rk2928, rk3066, rk3188) do not support UHS
speeds at all, and thus never handled phase data.
For that reason it never had a parse_dt callback and no driver private
data at all.
Commit ff6f0286c8 ("mmc: dw_mmc-rockchip: Add memory clock auto-gating
support") makes the private data sort of mandatory, because the init
function checks whether phases are configured internally or through the
clock controller.
This results in the old SoCs then experiencing NULL-pointer dereferences
when they try to access that private-data struct.
While we could have if (priv) conditionals in all places, it's way less
cluttery to just give the old types their private-data struct.
Fixes: ff6f0286c8 ("mmc: dw_mmc-rockchip: Add memory clock auto-gating support")
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
The litex_mmc driver assumes the card is already probed in the BIOS
and skip the phy initialization. This will cause the command fail
like the following when the old card is unplugged and then insert
a new card:
[ 62.923593] litex-mmc f0004000.mmc: Command (cmd 8) error, status -110
[ 62.949717] litex-mmc f0004000.mmc: Command (cmd 55) error, status -110
[ 62.976606] litex-mmc f0004000.mmc: Command (cmd 55) error, status -110
[ 63.002516] litex-mmc f0004000.mmc: Command (cmd 55) error, status -110
[ 63.028442] litex-mmc f0004000.mmc: Command (cmd 55) error, status -110
Add required clock settings and initialization for the CMD 0, so it can
probe the new card.
Fixes: 92e0991047 ("mmc: Add driver for LiteX's LiteSDCard interface")
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Reviewed-by: Gabriel Somlo <gsomlo@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
The previous clock uses roundup_pow_of_two() to calculate the core
clock frequency. It does not meet the actual hardware meaning.
The actual frequency is calculated by "ref_clk / ((div >> 1) << 1)".
Fix the clock divider calculation.
Fixes: 92e0991047 ("mmc: Add driver for LiteX's LiteSDCard interface")
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Reviewed-by: Gabriel Somlo <gsomlo@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
The RZ/G2H (R8A774E1) SoC was previously handled via the generic
"renesas,rcar-gen3-sdhi" fallback compatible string. However, because
the SDHI IP on RZ/G2H is identical with the R-Car H3-N (R8A77951), it
requires the specific quirks and configuration defined in
`of_r8a7795_compatible` rather than the generic Gen3 data.
Add the explicit "renesas,sdhi-r8a774e1" match entry to map it correctly.
Note that the DT binding file renesas,sdhi.yaml does not need an update
as the entry for this SoC is already present.
Fixes: 3194134288 ("arm64: dts: renesas: r8a774e1: Add SDHI nodes")
Cc: stable@vger.kernel.org
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
The EIC7700 code in sdhci-of-dwcmshc uses host->mmc->caps2 to select
different configuration paths for different card types. The current logic
distinguishes eMMC and SD, but does not handle SDIO separately.
Update the EIC7700 card-type checks so that eMMC, SD and SDIO are
distinguished explicitly.
Switch the reset path to dwcmshc_reset() so that pending interrupt state
is cleared consistently, and use sdhci_enable_clk() so the clock enable
sequence follows the standard SDHCI flow.
Fixes: 32b2633219 ("mmc: sdhci-of-dwcmshc: Add support for Eswin EIC7700")
Signed-off-by: Huan He <hehuan1@eswincomputing.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulfh@kernel.org>
Inline Crypto Engine (ICE) supports wrapped key generation. While
registering crypto profile the supported key types are queried from ICE
driver. So the explicit check for RAW key is not needed.
Fixes: fd78e2b582 ("mmc: sdhci-msm: Add support for wrapped keys")
Signed-off-by: Neeraj Soni <neeraj.soni@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
According to the ASIC design recommendations, the clock must be
disabled before operating the DLL to prevent glitches that could
affect the internal digital logic. In extreme cases, failing to
do so may cause the controller to malfunction completely.
Adds a step to disable the clock before DLL configuration and
re-enables it at the end.
Fixes: 08f3dff799 ("mmc: sdhci-of-dwcmshc: add rockchip platform support")
Cc: stable@vger.kernel.org
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Clean up module init by dropping redundant error messages (e.g.
allocation and USB driver registration failure will already have been
logged) and naming error labels after what they do.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Error labels should be named after what they do.
Rename the probe error labels.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the mmc fixes for v7.0-rc[n] into the next branch, to allow them to
get tested together with the mmc changes that are targeted for the next
release.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The vub300 driver maintains an explicit reference count for the
controller and its driver data and the last reference can in theory be
dropped after the driver has been unbound.
This specifically means that the controller allocation must not be
device managed as that can lead to use-after-free.
Note that the lifetime is currently also incorrectly tied the parent USB
device rather than interface, which can lead to memory leaks if the
driver is unbound without its device being physically disconnected (e.g.
on probe deferral).
Fix both issues by reverting to non-managed allocation of the controller.
Fixes: dcfdd698dc ("mmc: vub300: Use devm_mmc_alloc_host() helper")
Cc: stable@vger.kernel.org # 6.17+
Cc: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Make sure to deregister the controller before dropping the reference to
the driver data on disconnect to avoid NULL-pointer dereferences or
use-after-free.
Fixes: 88095e7b47 ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver")
Cc: stable@vger.kernel.org # 3.0+
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The function dw_mci_start_request() was just a thin wrapper around
__dw_mci_start_request(). Since it serves almost no functional purpose,
remove the wrapper to simplify the code flow.
Consequently, rename __dw_mci_start_request() to dw_mci_start_request()
so that the core implementation uses the primary name.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
With the removal of queue support, the function dw_mci_queue_request()
is now just a wrapper with a confusing name that doesn't suggest
anything about queue. Removes the function and moves its body into
dw_mci_request().
No functional changes intended.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The driver previously used an enum (dwcmshc_rk_type) to distinguish
platforms like the RK3568 and RK3588 based on DT compatible names.
This approach is inflexible, scales poorly for future revisions or
mixed-revision platforms, and conflates SoC names with controller
revisions. One example is RK3576 which lists "rockchip,rk3588-dwcmshc"
as a secondary compatible string just in order to claim it uses the
same controller revision as RK3588. This is confusing and makes it
error-prone to add new SoC support.
Introduces a new struct rockchip_pltfm_data containing a dedicated
revision field. The old enum is removed, and all code paths are
updated to use the revision-based data.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Disable new_tx/rx to avoid data transmission instability, and adjust
.data_tune, .stop_dly_sel, and .pop_en_cnt to fit the overall
configuration after disabling new_tx/rx, making it more compatible
with mt8189.
Fixes: 846a3a2fdf ("mmc: mtk-sd: add support for MT8189 SoC")
Tested-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Signed-off-by: Cathy Xu <ot_cathy.xu@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Convert the Arasan SDHCI driver to use the mainline standard
mmc_clk_phase_map infrastructure instead of custom clk_phase_in/out
arrays as well as arasan_dt_read_clk_phase().
The phase values for ZynqMP, Versal, and Versal-NET platforms are
still initialized from the predefined tables.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Get the optional reset line for the ASPEED SD controller during probe by
using devm_reset_control_get_optional_exclusive_deasserted().
This allows platforms such as AST2700, which require the SD controller
to be taken out of reset before use, to work with the existing driver.
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add support for the eMMC controller integrated in the HPE GSC (ARM64
Cortex-A53) BMC SoC under the new 'hpe,gsc-dwcmshc' compatible
string.
The HPE GSC eMMC controller is based on the DesignWare Cores MSHC IP
but requires several platform-specific adjustments:
Clock mux (dwcmshc_hpe_set_clock):
The GSC SoC wires SDHCI_CLOCK_CONTROL.freq_sel directly to a clock
mux rather than a divider. Forcing freq_sel = 1 when the requested
clock is 200 MHz (HS200) selects the correct high-speed clock source.
Using the generic sdhci_set_clock() would otherwise leave the mux on
the wrong source after tuning.
Auto-tuning / vendor config (dwcmshc_hpe_vendor_specific):
Disables the command-conflict check (DWCMSHC_HOST_CTRL3 BIT(0)) and
programs the ATCTRL register using existing AT_CTRL_* macros:
AT_CTRL_AT_EN auto-tuning circuit enable
AT_CTRL_SWIN_TH_EN sampling window threshold enable
AT_CTRL_TUNE_CLK_STOP_EN tune-clock-stop enable
PRE_CHANGE_DLY = 3 pre-change delay
POST_CHANGE_DLY = 3 post-change delay
SWIN_TH_VAL = 2 sampling window threshold
This combination is required for reliable HS200 signal integrity on
the GSC PCB trace topology.
eMMC mode (dwcmshc_hpe_set_emmc):
Helper that sets DWCMSHC_CARD_IS_EMMC unconditionally. Called from
both the reset and UHS-signaling paths.
Reset (dwcmshc_hpe_reset):
Calls dwcmshc_reset(), re-applies the vendor config above via
dwcmshc_hpe_vendor_specific(), and then calls dwcmshc_hpe_set_emmc().
The GSC controller clears the CARD_IS_EMMC bit on every reset;
leaving it clear causes card-detect mis-identification on an
eMMC-only slot.
UHS signaling (dwcmshc_hpe_set_uhs_signaling):
Wraps dwcmshc_set_uhs_signaling() and calls dwcmshc_hpe_set_emmc()
to ensure CARD_IS_EMMC is set for all timing modes, not just HS400.
Init (dwcmshc_hpe_gsc_init):
Obtains the SoC register block and MSHCCS offset via the
'hpe,gxp-sysreg' syscon phandle argument and sets SCGSyncDis
(BIT(18)) to allow the HS200 RX delay lines to settle while the
card clock is stopped during auto-tuning. Enables SDHCI v4 mode.
Quirks:
SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN: base clock not advertised in
capabilities; must be obtained from the DTS 'clocks' property.
SDHCI_QUIRK2_PRESET_VALUE_BROKEN: preset-value registers are not
populated in the GSC ROM.
All HPE-specific code is isolated to the new hpe_gsc_init / hpe_ops /
hpe_gsc_pdata symbols. No existing platform (Rockchip, T-Head, sg2042,
etc.) is affected.
Signed-off-by: Nick Hawkins <nick.hawkins@hpe.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This change aligns the SoCFPGA driver with the current dw_mmc core,
which now manages clock phases through host->phase_map. The phase values
are still scaled by SOCFPGA_DW_MMC_CLK_PHASE_STEP before being written
to the system manager registers.
No functional changes intended.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The "keep-power-in-suspend", "wakeup-source" and "enable-sdio-wakeup"
properties are already parsed in mmc_of_parse(). All sdhci drivers that
call sdhci_get_property() also call mmc_of_parse(). The only exception
is sdhci-of-hlwd, which does not call mmc_of_parse(), but its devicetree
does not use these properties anyway.
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add sdhci_get_property() call to parse common SDHCI DT properties,
including "bus-width = <1>" which sets SDHCI_QUIRK_FORCE_1_BIT_DATA
quirk for 1-bit data bus width configuration.
Remove the duplicate "no-1-8-v" property parsing since
sdhci_get_property() already handles it.
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the mmc fixes for v7.0-rc[n] into the next branch, to allow them to
get tested together with the mmc changes that are targeted for the next
release.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When 1-bit bus width is used with HS200/HS400 capabilities set,
mmc_select_hs200() returns 0 without actually switching. This
causes mmc_select_timing() to skip mmc_select_hs(), leaving eMMC
in legacy mode (26MHz) instead of High Speed SDR (52MHz).
Per JEDEC eMMC spec section 5.3.2, 1-bit mode supports High Speed
SDR. Drop incompatible HS200/HS400/UHS/DDR caps early so timing
selection falls through to mmc_select_hs() correctly.
Fixes: f2119df6b7 ("mmc: sd: add support for signal voltage switch procedure")
Signed-off-by: Luke Wang <ziniu.wang_1@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Multiple boards require different phase settings, rendering the default
phase policy unscalable. Therefore, we introduce phase map to address this
limitation. To preserve backward compatibility, the default_sample_phase
and original drv phase for different modes are retained, with phase map
values taking precedence when available.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The dw_mmc library already assists in invoking mmc_of_parse() to
provide unified parsing for variant drivers. We can also call
mmc_of_parse_clk_phase() to help variant drivers achieve unified parsing.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add support for the uSDHC controller found in NXP S32N79 automotive SoCs,
which reuse the existing sdhci-esdhc-imx driver with slice difference.
Compared with s32g2/s32g3, needn't set ESDHC_FLAG_SKIP_CD_WAKE flag
because s32n79 does not have this limitation.
Co-developed-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Convert the Renesas SDHI SD/SDIO controller driver using SYS-DMAC from
an open-coded dev_pm_ops structure to DEFINE_RUNTIME_DEV_PM_OPS() and
pm_ptr(). This simplifies the code, and reduces kernel size in case
CONFIG_PM is disabled.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This patch describes the two MMC controllers of the Loongson-2K0300 SoC,
one providing an eMMC interface and the other exporting an SD/SDIO
interface.
Its hardware design is similar to that of the Loongson-2K2000, but it
suffers from hardware defects such as missing CMD48 interrupts.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
More Loongson SoCs will be added, gathering all SoC private data
(`loongson2_mmc_pdata`) together to make the code clearer.
No functional change intended.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
In sdhci_bst_alloc_bounce_buffer(), if dma_alloc_coherent() fails, the
function immediately returns -ENOMEM without releasing the reserved
memory, which results in a memory leak.
Add the missing of_reserved_mem_device_release() call before returning
-ENOMEM to properly clean up the reserved memory.
Fixes: 695824f456 ("mmc: sdhci: add Black Sesame Technologies BST C1200 controller driver")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The mux branch contains updates to the mux core along with some
corresponding changes for a couple of consumer drivers, including an mmc
driver. Let's merge it into the next branch to get it tested and queued for
the next release.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Some hardware designs route data or control signals through a mux to
support multiple devices on a single sdhi controller.
In particular SolidRun RZ/G2L/G2LC/V2L System on Module use a mux for
switching between soldered eMMC and an optional microSD on a carrier
board, e.g. for development or provisioning.
SD/SDIO/eMMC are not well suited for runtime switching between different
cards, however boot-time selection is possible and useful - in
particular considering dt overlays.
Add support for an optional SD/SDIO/eMMC mux defined in dt, and select
it during probe.
Similar functionality already exists in other places, e.g. i2c-omap.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the mmc fixes for v7.0-rc[n] into the next branch, to allow them to
get tested together with the mmc changes that are targeted for the next
release.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The GL9750 SD host controller has intermittent data corruption during
DMA write operations. The GM_BURST register's R_OSRC_Lmt field
(bits 17:16), which limits outstanding DMA read requests from system
memory, is not being cleared during initialization. The Windows driver
sets R_OSRC_Lmt to zero, limiting requests to the smallest unit.
Clear R_OSRC_Lmt to match the Windows driver behavior. This eliminates
write corruption verified with f3write/f3read tests while maintaining
DMA performance.
Cc: stable@vger.kernel.org
Fixes: e51df6ce66 ("mmc: host: sdhci-pci: Add Genesys Logic GL975x support")
Closes: https://lore.kernel.org/linux-mmc/33d12807-5c72-41ce-8679-57aa11831fad@linux.dev/
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Reviewed-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Now that the Realtek PCIe SDMMC host implements the card_busy() callback,
the MMC core performs the required DAT[3:0] validation during the signal
voltage switch sequence.
As a result, the driver-side voltage stabilization helpers
sd_wait_voltage_stable_1() and sd_wait_voltage_stable_2() become redundant.
These helpers duplicate DAT line checks that are now handled centrally by
the MMC core via card_busy().
Remove the two stabilization helpers and simplify sdmmc_switch_voltage()
accordingly, keeping only the minimal clock control needed around the
voltage switch.
No functional changes and intended.
Signed-off-by: Ricky Wu <ricky_wu@realtek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This driver currently only supports builds against a PIC32 target. Now
that commit d6618d277c ("mmc: sdhci-pic32: update include to use
pic32.h from platform_data") is merged, it's possible to compile this
driver on other architectures.
To avoid future breakage of this driver in the future, let's update the
Kconfig so that it can be built with COMPILE_TEST enabled on all
architectures.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Three MMC drivers have unnecessary module_init and module_exit functions
that are empty or just print a message. Remove them. Note that if a
module_init function exists, a module_exit function must also exist;
otherwise, the module cannot be unloaded.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
