Pull more thermal control updates from Rafael Wysocki:
"This mostly consists of assorted updates of thermal drivers, including
new hardware support (Airoha AN7583, Qualcomm Master BandGap thermal
monitor, QCom PMIC5 Gen3 ADC), but it also includes two reverts of
recent cosmetic thermal core updates that went against driver core
plans to eliminate class_create():
- Fix missing bitfield include headers in Armada and QCom SPM BMG
drivers (Daniel Lezcano)
- Fix missed file when manually applying a change after a conflict
resolution for the QCom SPMI ADC TM5 Gen3 (Daniel Lezcano)
- Move thermal_zone_device_enable() to the right place in order to
prevent calling it if the thermal zone registration failed (Dan
Carpenter)
- Improve bitfield manipulations on Armada (Bryan B. Lima)
- Remove unneeded 'fast_io' on Sun8i and Armada (Wolfram Sang)
- Fix wrong boundary when clamping the low values in the set_trips()
callback and fix wrong mask when setting the temperature interval
on Airoha (Christian Marangi)
- Make use of the regmap API to support Airoha AN7583 (Christian
Marangi)
- Fix adc_tm5_get_temp() return check value on the QCom SPMI ADC
sensor (Rakesh Kota)
- Fix unbalanced clock enablement when the resume fails on the iMX
driver (Can Peng)
- Add Qualcomm Master BandGap thermal monitor support (Satya Priya
Kakitapalli)
- Add Maili Temperature bindings compatible (Haritha S K)
- Add a devm action to clean hardware interrupts, sampling, and
control registers on Spacemit K1 (Pei Xiao)
- Fix trivial typo in a thermal OF code comment (Marek Vasut)
- Remove unnecessary print on Qcom SPMI ADC driver when a call to
devm_request_threaded_irq() fails as this one already prints a
message (Jishnu Prakash)
- Add support for QCom PMIC5 Gen3 ADC by using auxiliary driver and
shared interrupt with the IIO driver (Jishnu Prakash)
- Make resets optional on MT8196 and add the corresponding property
in the DT bindings (AngeloGioacchino Del Regno)
- Fix clock staying enabled on failing resume operation on Qoriq (Can
Peng)
- Fix wrong closing brace position in thermal library header (Andreas
Haufler)
- Fix low and high trip point validation by moving the check after
the clamp on the spacemit driver (surendra)
- Remove redundant error messages on IRQ request failure (Pan Chuang)
- Add IIO_CONSUMER namespace import to the qcom-spmi-mbg-tm thermal
driver to avoid modpost warnings that would appear after merging
the iio tree against the thermal updates (Nathan Chancellor)
- Revert two recent cosmetic updates of the thermal core conflicting
with driver core plans to eliminate class_create() (Rafael
Wysocki)"
* tag 'thermal-7.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits)
thermal/drivers/qcom-spmi-mbg-tm: Add module namespace import for IIO_CONSUMER
Revert "thermal/core: Allocate the thermal class dynamically"
Revert "thermal/core: Use the thermal class pointer as init guard"
thermal/drivers/armada: Fix missing bitfields include
thermal/drivers/qcom/spm mbg tm: Fix missing bitfield header
thermal/drivers/qcom: Fix missing spmi adc tm5 gen3 file
thermal/drivers: Remove redundant error messages on IRQ request failure
thermal/drivers/spacemit: Validate clamped trip thresholds
tools/lib/thermal: Fix misplaced extern "C" closing brace
thermal/drivers/qoriq: Disable clock on resume failure
thermal/drivers/mediatek/lvts_thermal: Make reset optional for MT8196
dt-bindings: thermal: mediatek: Make resets optional for MT8196
thermal/drivers/qcom: add support for PMIC5 Gen3 ADC thermal monitoring
iio: adc: qcom-spmi-adc5-gen3: Share SDAM0 IRQ with ADC_TM auxiliary driver
iio: adc: qcom-spmi-adc5-gen3: Remove an unnecessary print
thermal/of: Fix trivial enabled typo
thermal/drivers/spacemit/k1: Add shutdown action and reorder registration order
dt-bindings: thermal: qcom-tsens: Document the Maili Temperature Sensor
thermal/drivers/qcom: Add support for Qualcomm MBG thermal monitoring
dt-bindings: thermal: Add Qualcomm MBG thermal monitor support
...
Pull perf tools updates from Namhyung Kim:
"perf c2c:
- Add 'function view' in perf c2c report TUI (switched by pressing
'TAB' in the cacheline view) to organize samples around functions
rather than cachelines in 3-level hierarchy:
Level 1: Read-side function (sorted by estimated Cycles %)
Level 2: Contending writer functions (sorted by Store count)
Level 3: Shared cacheline addresses
Users can navigate the entries and fold/unfold using 'e' key. An
example output would look like below:
Shared Data Functions Table (19 entries, sorted on Cycles %)
Cycles Store
% count Function / Contending function / Cacheline
----------------------------------------------------------------------
+ 35.67% 876 + [k] cpupri_set
+ 24.31% 424 + [k] pull_rt_task
- 16.53% 555 - [k] dequeue_pushable_task
145 - [k] pull_rt_task
145 0xff2d0082809da080
139 - [k] enqueue_pushable_task
70 0xff2d00a2071f9640
69 0xff2d0082809da000
python module support:
- Extend "perf" python module so that it can be fully functional. The
goal is to run scripts directly, not by 'perf script' command. This
would give better performance as well as more control to build
standalone programs with UI.
- Add LiveSession helper (perf_live.py) to enable live event
collection directly from Python using perf.evlist and
perf.parse_events.
perf stat:
- Add --hide-zero-events option to suppress zero-count events
- Reject conflicting --field-separator and --json-output options
- Fix duplicate event output with --for-each-cgroup
perf sched latency:
- Add -H/--histogram and --hist-mode (log|linear) options to show
scheduler wait latency histograms
- Add --time option to filter analysis by time span in 'perf sched
latency'
ARM CoreSight:
- Synthesize callchains for instruction samples from CoreSight trace
using thread stack ('--itrace=g...')
- Support call indentation ('perf script -F +callindent') to display
call depth hierarchy on branch samples
- Decode ETE (Embedded Trace Extension) exception packets
Build system:
- Add 'make install-build-deps' target to install required packages
- Parallelize JSON and metric pre-computation in jevents.py for
faster builds
Vendor event/metric updates:
- Add Intel Nova Lake events and update tables for existing models
- Update AMD Zen 5 and Zen 6 core events
- Update Arm64 Tegra410 metrics and PowerPC hcalls
Internal changes and fixes:
- Harden trace-event and synthetic event parsing against corrupted
data
- Fix unwinding of multi-threaded processes in libdw unwinder
- Fix memory leaks in various commands and python bindings
- Speed up 'perf test' shell tests"
* tag 'perf-tools-for-v7.3-2026-08-21' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (232 commits)
perf vendor events arm64: Fix Tegra410 Olympus event 0x0197
perf vendor events arm64: fix swapped MetricGroup for Tegra410 L1 prefetcher metrics
perf evlist: Warn when 'sleep' workload is used without system-wide (-a) option
perf c2c: document function view in perf-c2c man page
perf c2c: add function view browser UI and cacheline detail
perf c2c: build and finalize the function view hierarchy
perf c2c: add function view hierarchy entry creation
perf c2c: add function view stats merge and memory management
perf c2c: add HPP list parsing for function view columns
perf c2c: add column rendering for function view
perf c2c: add function view model skeleton
perf c2c: extract shared data structures into util/c2c.h
perf test sample-parsing: Validate PERF_FORMAT_GROUP values without LOST
perf dso: Replace assert with runtime check in dso__read_symbol()
perf dso: Guard against cache underflow on short reads in dso_cache__memcpy()
perf dso: Use stored fd error instead of stale errno in file_read() and file_size()
perf dso: Guard close() against invalid fd in dso__decompress_kmodule_path()
perf dso: Guard against errno==0 when dso__get_filename() returns NULL
perf build: install-build-deps: add RHEL family devel package mapping
perf build: Remove leftover feature tests for removed cxx and clang support
...
Pull documentation updates from Jonathan Corbet:
"It has been a not-too-busy cycle for docs; here's the highlights:
- A (hopefully) consensus change to our LLM-attribution requirements,
removing the specific model name from the Assisted-by tag
- A couple of new realtime documents
- Various docs-build-system fixes
- Ongoing work with the Chinese, Portuguese, and Japanese
translations
...and lots of typo fixes, grammar tweaks, etc"
* tag 'docs-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux: (85 commits)
Doc: admin-guide: pm: Remove unnecessary backticks and fix a spell
Documentation: Extend the real-time hardware bits with some firmware bits
docs: pt_BR: Reorganize process/index.rst to follow english structure
docs: conf.py: fix the 'utf-8' typo
doc tools: fix 'path' typos
Documentation: real-time: Add kernel configuration guide
docs: python: abi_regex: convert adjacent index placeholders
docs: python: abi_regex: catch the right exception for a bad regex
docs: sphinx-build-wrapper: include localversion in kernel version string
Documentation: html: adjust sidebar section titles styling
Documentation: html: show sections in the sidebar
checkpatch.pl: adapt to new Assisted-by: format
MAINTAINERS: update Traditional Chinese documentation maintainers
docs: pt_BR: process: Translate CVE documentation
docs: pt_BR: translate the management-style.rst to Brazilian Portuguese
docs: xforms_lists: support DEFINE_IDTENTRY_IRQ()
coding-assistants: simplify attribution
docs: translations: pt_BR: translate email-clients.rst
docs: pt_BR: process: Translate the security-bugs.rst
doc:it_IT: align doc-guide translation
...
Pull bpf updates from Daniel Borkmann:
"Major changes:
- Redesign the verifier error reporting: failures now carry source
and instruction annotations along with the causal event history
that led to them, making program rejections far easier to debug and
repair (Kumar Kartikeya Dwivedi)
- Add arena argument support to kfuncs and struct_ops through the new
__arena and __arena__nullable suffixes (Tejun Heo, Puranjay Mohan,
Kumar Kartikeya Dwivedi, Ihor Solodrai)
- Signed BPF program loader rework to accommodate both BPF and
security community needs where the kernel runs the signature
verification at BPF_PROG_LOAD time before the LSM admission hook
(Daniel Borkmann)
- Add a set of ksock kfuncs which let BPF LSM and syscall programs
create, connect and send on UDP sockets in order to emit telemetry
data (Mahe Tardy)
- Unify helper and kfunc call argument verification and classify
kfunc arguments purely from BTF into a generated bpf_func_proto
which is computed once at add-call time (Amery Hung)
Other features and fixes:
- Enable EXECMEM_ROX_CACHE for BPF allocations on x86 (Mike Rapoport)
- Add bidirectional VLAN support to bpf_fib_lookup() through the new
BPF_FIB_LOOKUP_VLAN and BPF_FIB_LOOKUP_VLAN_INPUT flags (Avinash
Duduskar)
- Infer zext_dst from static register liveness analysis to fix 32-bit
zero-extension semantics, and remove the artificial limitations on
pointer types eligible for spilling (Eduard Zingerman)
- Inline the numeric open-coded iterator kfuncs so that bpf_for()
loops no longer pay a kfunc call on every iteration (Puranjay
Mohan)
- Add an arena-based bitmap data structure to libarena along with
serial and parallel selftests (Emil Tsalapatis)
- Teach resolve_btfids to discover kfuncs from the kernel's BTF ID
sets and to emit kfunc BTF decl tags, reducing the kernel build's
dependency on pahole features (Ihor Solodrai)
- Add BPF_F_ADJ_ROOM_DECAP_* flags to bpf_skb_adjust_room() so that
tunnel decapsulation can update the GSO and encapsulation state of
the skb (Nick Hudson)
- Fix the ring buffer pending_pos walk and the available-data
accounting on 32-bit position wrap (Israel Téllez García)
- Add memory usage accounting for arena maps and fix an mmap_lock
deadlock on arena lock failure (Jiayuan Chen)
- Add tracing_multi link info support to the kernel UAPI and bpftool,
and refactor the stack map code to run with preemption disabled
(Jiri Olsa)
- Support BPF_F_EGRESS in bpf_redirect_peer() to emit the skb in the
egress direction of the target's peer device (Jordan Rife)
- Add a KF_SPINLOCK_SAFE kfunc flag so that providers, in particular
modules, can declare kfuncs safe to call under bpf_spin_lock
instead of relying on the verifier's hard-coded allowlist (Kaitao
Cheng)
- Introduce global percpu data for BPF programs with libbpf probing
and bpftool skeleton support, and stop exposing uninitialized
kernel heap memory when copying per-CPU map values (Leon Hwang)
- Add s390 JIT support for load-acquire and store-release
instructions (Maxim Khmelevskii)
- Fix a CFI mismatch in the task work callback and an arm64 KASAN
false positive after bpf_throw() (Mykyta Yatsenko)
- Reject writes through untrusted BTF pointers and bound the
rdonly/rdwr_buf_size kfunc arguments (Nicholas Dudar)
- Invalidate RCU pointers only after the final spin unlock and
account for preempt and IRQ disabled regions as overlapping RCU
protection (Ning Ding)
- Support mixing bpf2bpf calls and tail calls on RV64, add signed
operations and 32-bit atomics to the RV32 JIT, and add timed
may_goto support (Pu Lehui, Kuan-Wei Chiu, Feng Jiang)
- Fix a use-after-free on mm_struct in bpf_find_vma() for foreign
tasks and an mmap_lock leak in the irq_work path (Sanghyun Park)
- Populate mmap-able BPF array map memory lazily which makes mmap()
O(1) instead of proportional to the map size (Song Liu)
- Introduce a jit_required flag and reject programs with inlined
helpers when no JIT is available, where the interpreter would
otherwise jump into an invalid address (Tiezhu Yang)
- Fix the x86 JIT per-CPU address resolution into an extended
register where the REX prefix dropped the high destination register
bit (Vineet Gupta)
- Reject MEM_ALLOC BTF accesses past object bounds, arena frees below
the arena base, and mixed arena and ordinary atomic paths (Yiyang
Chen)
- Fix the trampoline handling of 128-bit arguments and of return
values larger than 8 bytes (Yonghong Song)
- Ensure that any fault prone load is rewritten with exception table
handling, and fix the arena load-acquire and atomic fetch handling
in the x86, arm64, riscv and s390 JITs (Daniel Borkmann)
- Many more fixes and cleanups across the verifier, arena,
trampolines, sockmap, cgroup, ring buffer, x86/arm64/riscv/s390
JITs, libbpf, bpftool, resolve_btfids and selftests"
* tag 'bpf-next-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (373 commits)
selftests/bpf: Add tests for a store on a fault prone qdisc pointer
selftests/bpf: Add tests for fault prone loads out of RCU pointers
selftests/bpf: Add tests for pointer type merge at a shared load
selftests/bpf: Remove duplicate copies of the arena spinlock qnodes
selftests/bpf: Retry stat generation in cgroup_iter_memcg
selftests/bpf: Test pseudo-function policy diagnostics
bpf: Distinguish function references in policy diagnostics
bpf: Preserve source attribution without source text
selftests/bpf: Test kfunc argument diagnostics
bpf: Correct kfunc argument diagnostics
bpf: Use canonical stack argument names in diagnostics
bpf: Preserve R0 lineage across helper calls
selftests/bpf: Exercise negative optlen in cgroup getsockopt hook
bpf: Reject negative optlen in cgroup getsockopt hook
selftests/bpf: tc_tunnel - validate decap GSO and encapsulation state
bpf: Clear decap state on skb_adjust_room shrink path
bpf: Allow new DECAP flags and add guard rails
bpf: Add BPF_F_ADJ_ROOM_DECAP_* flags for tunnel decapsulation
bpf: Refactor masks for ADJ_ROOM flags and encap validation
bpf: Name the enum for BPF_FUNC_skb_adjust_room flags
...
ringbuf_process_ring() walks the records between the consumer and the
producer with an ordering comparison:
while (cons_pos < prod_pos) {
cons_pos and prod_pos mirror the kernel's ring positions and are
unsigned long here too, so on 32-bit they wrap at 2^32 bytes of traffic.
When producer_pos has wrapped and consumer_pos has not, prod_pos is the
smaller of the two, the loop body never runs and no record is consumed.
Since consumer_pos only advances inside that loop, it never wraps either
and the consumer stops delivering samples for good, with no error
returned to the caller: ring_buffer__poll() keeps reporting zero
records while the kernel side fills up and starts dropping.
Compare the distance instead. The consumer never runs ahead of the
producer, so prod_pos - cons_pos is the amount of unconsumed data and
stays correct across the wrap.
64-bit hosts are unaffected in practice: the counters would need 16 EiB
to wrap. This is the userspace counterpart of the kernel-side walk fixed
in "bpf: Fix pending_pos walk on 32-bit ring position wrap"; a 32-bit
consumer hits whichever of the two comes first.
Signed-off-by: Israel Téllez García <i.tellez@btesa.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260814124843.22041-5-i.tellez@btesa.com
Use array_map_mmap_sz() for PERCPU_ARRAY like ARRAY in bpf_map_mmap_sz().
This lets bpf_map__set_value_size() skip mmap(), memcpy(), and munmap()
when the old and new value sizes occupy the same number of pages.
Fix some typos btw:
* mmapble -> mmapable
* satisified -> satisfied
* relocatin -> relocation
* atach_btf_obj_fd -> attach_btf_obj_fd
* len_secnd -> len_second
* precendence -> precedence
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260814173206.93082-3-leon.hwang@linux.dev
Enhance bpftool to generate skeletons that properly handle global percpu
variables. The generated skeleton now includes a dedicated structure for
percpu data, allowing users to initialize and access percpu variables more
efficiently.
For global percpu variables, the skeleton now includes a nested
structure, e.g.:
struct test_global_percpu_data {
struct bpf_object_skeleton *skeleton;
struct bpf_object *obj;
struct {
struct bpf_map *percpu;
} maps;
// ...
struct test_global_percpu_data__percpu {
int data;
char run;
struct {
char set;
int i;
int nums[7];
} struct_data;
int nums[7];
} *percpu;
// ...
};
* The "struct test_global_percpu_data__percpu *percpu" points to
initialized data, which is actually "maps.percpu->mmaped".
* Before loading the skeleton, updating the
"struct test_global_percpu_data__percpu *percpu" modifies the initial
value of the corresponding global percpu variables.
* After loading the skeleton, "maps.percpu->mmaped" has been marked as
read-only in libbpf. If users want to update the global percpu
variables, they have to update the "maps.percpu" map instead.
* For lightweight skeleton, "lskel->percpu" will be protected by
"mprotect(p, sz, PROT_READ)".
* For subskeleton, those variables of global percpu data will be
skipped.
Assisted-by: Codex:gpt-5.5-xhigh
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/bpf/20260813152324.97937-7-leon.hwang@linux.dev
Add support for global percpu data in libbpf by adding a new ".percpu"
section, similar to ".data". It enables efficient handling of percpu
global variables in bpf programs.
When generating loader for lightweight skeleton, update the percpu_array
map used for global percpu data using BPF_F_ALL_CPUS, in order to update
values across all CPUs using one value slot.
Unlike global data, the mmaped data for global percpu data will be marked
as read-only after populating the percpu_array map. Thereafter, users can
read those initialized percpu data after loading prog. If they want to
update the percpu data after loading prog, they have to update the
percpu_array map using key=0 instead.
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260813152324.97937-6-leon.hwang@linux.dev
While validating recent CXL ABI documentation updates with
get_abi.py, every decoderX.Y entry was reported as undocumented.
The placeholder conversion mishandles adjacent index placeholders,
producing patterns that cannot match the corresponding sysfs paths.
As a result, valid ABI entries are reported as undocumented.
Handle adjacent placeholders independently so generated patterns match
the documented paths. This fixes decoderX.Y entries in the CXL ABI and
other ABI documentation that uses the same naming convention.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <cc893dca3aaa3ec833ba70d1f32c3e7342b7faf2.1786139549.git.alison.schofield@intel.com>
While validating recent CXL ABI documentation updates with
get_abi.py, the 'undefined' mode was found to abort instead of
reporting undocumented ABI entries.
Older Python releases raise re.error, while newer releases expose
re.PatternError. Catching the compatible re.error exception handles
both cases.
Use re.error so the scan continues and reports the remaining
results.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <9f6fa7a9aa6ba9a26b484b911976713356b3fd44.1786139549.git.alison.schofield@intel.com>
The public libthermal header opens the C++ 'extern "C" {' block inside
the __LIBTHERMAL_H include guard, but places the closing brace after
the guard has already ended:
#endif /* __LIBTHERMAL_H */
#ifdef __cplusplus
}
#endif
On a single inclusion the braces still balance, so the problem is
invisible. On the second inclusion of the header in the same C++
translation unit the include guard skips the opening 'extern "C" {',
while the closing '}' lives outside the guard and is emitted anyway.
This leaves a stray '}' and breaks compilation for any C++ consumer
that includes the header more than once.
Move the closing block inside the include guard so both halves of the
'extern "C"' declaration are guarded consistently.
Signed-off-by: Andreas Haufler <andreas@haufler.info>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Link: https://patch.msgid.link/20260721083230.91246-1-andreas@haufler.info
Avoid kernel-doc warnings by supported DEFINE_IDTENTRY_IRQ() as a
function transform.
Warning: arch/x86/kernel/apic/apic.c:2157 function parameter
'spurious_interrupt' not described in 'DEFINE_IDTENTRY_IRQ'
Warning: arch/x86/kernel/apic/apic.c:2157 expecting prototype for
spurious_interrupt(). Prototype was for DEFINE_IDTENTRY_IRQ() instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260723190151.507295-1-rdunlap@infradead.org>
Drop an extra newline (blank line) on warning messages for (2 places):
expecting prototype for typedef. Prototype was for typedef {symbol}
instead
and
expecting prototype for {struct|union}. Prototype was for struct|union
{symbol} instead
This makes these messages consistent with the similar enum warning,
which has no extra blank line.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260729052736.1423688-1-rdunlap@infradead.org>
btf__find_by_name_kind() searches the base BTF before the split BTF,
so in case of a name collision between base and split it always
returns a base type. Tools that process split BTF may need to restrict
a lookup to the split's own types.
The internal helper btf__find_by_name_kind_own() already does exactly
that. Make it a public API.
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20260722233518.778854-5-ihor.solodrai@linux.dev
Try to remove some, but not all duplicate toolchain definitions. In
these instances, their makefiles already include
tools/scripts/Makefile.include which defines these in a consistent way.
STRIP is the only one that was set with an '=', but I don't think it
was significant so that difference can be dropped.
Signed-off-by: James Clark <james.clark@linaro.org>
Reviewed-by: Ian Rogers <irogers@google.com>
Acked-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Documentation/kbuild/llvm.rst mentions that readelf is included in the
LLVM toolchain, but it's not currently included in this block.
Add it so that LLVM=... options also apply to readelf. Users in tools/
were Perf which was hardcoding it, and another was the BPF makefile.
Both already include Makefile.include so convert them to use the new
variables.
Where readelf wasn't doing anything arch specific, use HOSTREADELF
because it's more likely to be installed.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Acked-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Recent check_sections() change added a warning if a documentation tag
member name does not match the detected struct/union member names. Since
the checker knows all possible names, we can suggest known names, so
that it's more obvious how to deal with the warning.
Signed-off-by: Ryszard Knop <ryszard.knop@intel.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260717125753.634550-1-ryszard.knop@intel.com>
attach_probe/uprobe-lib and uprobe_autoattach selftests fail with "failed
to resolve full path for libc.so.6" on older non-usrmerged distros, where
libc.so.6 lives under a top-level /lib64 or /lib rather than /usr/lib64 or
/usr/lib. Add /lib64:/lib to the search paths, alongside the existing
/usr/lib64:/usr/lib and Debian multiarch entries.
Fixes: 1ce3a60e3c ("libbpf: auto-resolve programs/libraries when necessary for uprobes")
Signed-off-by: Ricardo B. Marlière <rbm@suse.com>
Acked-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/bpf/20260720-selftests-bpf_fixes-v2-3-b450eda93dfe@suse.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
If the realloc for fda->entries succeeds but the realloc for fda->priv
fails, the error path frees the newly allocated entries.
However, fda->entries is neither updated to point to the new entries block
nor cleared to NULL. If realloc moved the allocation to a new block, the
old fda->entries pointer is now freed memory.
When fdarray__exit() is later called to clean up, it executes
free(fda->entries), which would trigger a double-free on that old pointer.
Reported-by: Sashiko Review <sashiko-bot@kernel.org>
Closes: https://lore.kernel.org/linux-perf-users/20260710200150.11FE71F00A3A@smtp.kernel.org
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Under system-wide (-a) parallel streaming mode (--threads=cpu),
background recording threads can be inundated by a continuous
firehose of hardware samples generated by the OS. In this state,
a background thread's local hit count remains unequal to its
sample count, causing it to bypass the blocking fdarray__poll()
call entirely on each iteration of its recording loop.
Because the termination check relies on the POLLHUP event status
populated specifically by fdarray__poll(), bypassing it prevents
the background thread from ever recognizing that its control pipe
was closed by the main thread. This traps the background thread
in an infinite recording loop, hanging the main thread indefinitely
as it awaits a termination acknowledgment that never arrives.
Ensure teardown completion by adding explicit evlist__disable()
calls in the main thread's cleanup paths at out_child: and
out_child_no_flush:. Additionally, patch fdarray__filter() to
respect the fdarray_flag__nonfilterable flag, preventing it
from incorrectly setting the background thread's control pipe
file descriptor to -1 and clearing its revents mask upon
processing termination POLLHUP signals.
Fixes: f94563fac2 ("perf record: fix poll storm when monitored threads exit")
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
When btf_parse_elf() is called without a caller-supplied base_btf (i.e.
via the public btf__parse_elf()) and the object file carries a .BTF.base
(distilled base) section, a dist_base_btf object is created and used as
the base of the split BTF built from the .BTF section. Because base_btf
is NULL, the relocation block that would otherwise free and clear
dist_base_btf is skipped, and ownership of dist_base_btf is instead
transferred to the split btf by setting btf->owns_base = true.
That ownership transfer was performed before the fallible btf_ext__new()
call that parses the .BTF.ext section. If .BTF.ext is malformed,
btf_ext__new() fails and the function jumps to the error path, which
frees dist_base_btf directly and then frees btf. Since owns_base is
already set, btf__free(btf) also frees btf->base_btf, which is the same
dist_base_btf object. The result is a use-after-free read followed by a
double free of the base BTF, driven entirely by a crafted object file
(a .BTF + .BTF.base + malformed .BTF.ext combination) passed to
btf__parse_elf(), as used by bpftool, pahole and similar tools.
Transfer ownership only after .BTF.ext has been parsed successfully, so
that any earlier failure leaves dist_base_btf owned solely by the local
cleanup path and it is freed exactly once.
Signed-off-by: Naveed Khan <naveed@digiscrypt.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/178345549172.94179.7948304165383170781@digiscrypt.com
The signed gen_loader used to police its own metadata map from within
BPF: emit_signature_match() read the kernel-cached map->sha[] back
through hardcoded struct bpf_map offsets and compared it against a hash
that compute_sha_update_offsets() baked into the signed instructions,
after a BPF_OBJ_GET_INFO_BY_FD round-trip to populate map->sha[].
The kernel now verifies the metadata at BPF_PROG_LOAD time by folding
the frozen contents of the loader's exclusive fd_array maps into the
signature, so the loader no longer checks anything itself. Generated
loaders thus carry no verification logic of their own anymore: Nothing
in the signing chain depends on emitted loader bytecode doing the right
thing.
On the loading side, skel_internal.h now sets fd_array_cnt for a signed
load so the kernel scans fd_array for the exclusive metadata map -
still frozen, as the kernel requires - and the BPF_OBJ_GET_INFO_BY_FD
round-trip to populate map->sha[] is gone. The struct bpf_map layout
BUILD_BUG_ON()s on the kernel side are removed as well: they only
pinned the ABI for the in-BPF read of map->sha[] that is no longer
needed. Same for the map->excl member. Note: gen_hash is retained; it
still marks a loader as signed so an untrusted host cannot re-dimension
maps or override initial values now covered by the signature.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20260708075343.358712-4-daniel@iogearbox.net
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
When `perf record` samples a multi-threaded process and one of the
target threads exits during the session, perf itself may start burning
100% CPU (up to 200% across two cores) until the session ends. A
single dead fd is sufficient to trigger this; it can be reproduced with
15 pthreads in a compute loop where one thread exits halfway through.
The root cause is two independent instances of the same defect: dead
perf_event ring-buffer fds are left in a pollfd array. When a monitored
thread exits, the kernel closes its ring-buffer fd, which then returns
POLLHUP. POSIX specifies that poll() always reports POLLHUP and POLLERR
regardless of the events mask, so any dead fd left in the array makes
poll() return immediately every time, spinning in a tight loop:
3 seconds: 256,600 poll() calls, 0 context switches, only 21 write()
Woken up count goes from ~0 to 1,300,000+
There are two affected poll paths, fixed together here:
1. Record main loop, via fdarray__filter() (tools/lib/api/fd/array.c).
Since commit 59b4412f27 ("libperf: Avoid internal moving of
fdarray fds") it only zeroes events/revents without setting fd to
-1, so poll() keeps reporting POLLHUP for the entry. Setting
fd = -1 makes poll() skip it, matching the pattern already used in
the control-fd path at tools/perf/builtin-record.c:1673.
2. BPF sideband thread, perf_evlist__poll_thread()
(tools/perf/util/sideband_evlist.c). This thread polls for
PERF_RECORD_BPF_EVENT but, unlike the main record loop, never calls
fdarray__filter() at all, so dead fds accumulate forever and it
spins at 100% CPU:
Before fix: dJiffies=101, wchan=0 (running)
After fix: dJiffies=0, wchan=do_sys_poll (blocking)
Fixed by calling the existing evlist__filter_pollfd() helper after
evlist__poll(), mirroring the main record loop. <poll.h> is
included for the POLLERR/POLLHUP macros (previously unused there).
The two fixes compose: fix 1 makes poll() ignore dead fds (fd=-1); fix
2 ensures the sideband thread actually performs the filtering. Both
paths are affected in all kernels from v5.1/v5.9 to the current master
(7.2-rc1); the source of both functions is byte-identical across them.
BPF event recording is preserved: after the fix, perf.data still
contains PERF_RECORD_BPF_EVENT records and bpf_prog_info entries.
Verified on perf 6.1.76, 6.6.143 and 7.2-rc1 with a minimal reproducer
(Woken up 1,300,000 -> 3, CPU 100% -> 0%) and an A/B orthogonal test:
keeping the unpatched binary but preventing the target thread from
exiting also makes the storm disappear, confirming the trigger.
Fixes: 59b4412f27 ("libperf: Avoid internal moving of fdarray fds")
Fixes: 657ee55319 ("perf evlist: Introduce side band thread")
Signed-off-by: Jiawei Sun <abyssmystery@gmail.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
bpf_object__probe_loading() tries to load trivial SOCKET_FILTER and
TRACEPOINT programs to verify the BPF environment works. When a
BPF token is in use with restricted program type permissions, these
probe loads may fail because the token does not allow the specific
program types, even though BPF loading is perfectly functional.
Fix by skipping the probe when a token FD is present: BPF token
creation itself proves the kernel has a working BPF subsystem.
Real BPF issues will be caught during actual program and map loading.
Signed-off-by: Yuan Chen <chenyuan@kylinos.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260610145059.113412-2-chenyuan_fl@163.com
Building libbpf with -Wall (as happens via bpftool's bootstrap build)
surfaces ~120 -Wformat warnings where pr_warn/pr_debug format specifiers
don't match their argument types: %d for __u32/Elf64_Word, %u for signed
ints, %zd for size_t, %ld for unsigned long, and %x/%lx/%llx applied to
signed values.
Match each specifier to its argument's type where a correctly-signed
specifier exists (%d<->%u, %ld->%lu, %zd->%zu). For hex conversions,
which have no signed form, cast the argument instead (%x->(unsigned),
%lx->(unsigned long), %llx->(unsigned long long)). No functional change.
Note, the fdinfo map_flags sscanf used %i into a __u32 *, which warns.
The kernel prints map_flags as hex ("map_flags:\t%#x\n" in
bpf_map_show_fdinfo(), unchanged since the field was added to fdinfo), so
switch the conversion to %x: it parses the 0x-prefixed value and expects
unsigned int *, matching the destination, so the warning is gone with no
cast.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20260624204946.2901178-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull more documentation updates from Jonathan Corbet:
"A handful of late-arriving docs fixes, along with one document update
that fell through the cracks before"
* tag 'docs-7.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux:
docs: tools: Fix typo 'ackward' to 'awkward' in unittest.rst
kdoc: xforms: ignore special static/inline macros
kdoc: xforms_lists: handle DECLARE_PER_CPU() in kernel-doc
MAINTAINERS: Fix regex for kdoc
docs: kgdb: Fix path of driver options
Documentation: tracing: fix typo in events documentation
Docs/driver-api/uio-howto: document mmap_prepare callback
docs/mm: clarify that we are not looking for LLM generated content
kernel-doc: xforms: support __SYSFS_FUNCTION_ALTERNATIVE()
drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm_color.c contains 7 (for
now) functions that use STATIC_IFN_KUNIT or INLINE_IFN_KUNIT macros for
function qualifiers (static or not, inline or not).
These cause parse warnings from kernel-doc:
Invalid C declaration: Expected identifier in nested name, got keyword:
struct [error at 29]
STATIC_IFN_KUNIT const struct drm_color_lut * __extract_blob_lut (const
struct drm_property_blob *blob, uint32_t *size)
Handle these in kernel-doc to prevent multiple warnings.
Fixes: 647d1fd046 ("drm/amd/display: Add KUnit test for color helpers")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260612234458.1084156-1-rdunlap@infradead.org>
Add support for DECLARE_PER_CPU() as a var (variable) as used in
<linux/netfilter/x_tables.h>.
Warning: include/linux/netfilter/x_tables.h:345 function parameter 'seqcount_t' not described in 'DECLARE_PER_CPU'
Warning: include/linux/netfilter/x_tables.h:345 function parameter 'xt_recseq' not described in 'DECLARE_PER_CPU'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260614052452.1557987-1-rdunlap@infradead.org>
Add support for __SYSFS_FUNCTION_ALTERNATIVE() to create a union of its
members (as though CONFIG_CFI is unset).
Fixes these docs build warnings:
WARNING: include/linux/device.h:117 Invalid param: __SYSFS_FUNCTION_ALTERNATIVE( ssize_t (*show)(struct device *dev, struct device_attribute *attr, char *buf)
WARNING: include/linux/device.h:117 struct member '__SYSFS_FUNCTION_ALTERNATIVE( ssize_t (*show' not described in 'device_attribute'
WARNING: include/linux/device.h:117 Invalid param: __SYSFS_FUNCTION_ALTERNATIVE( ssize_t (*store)(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
WARNING: include/linux/device.h:117 struct member '__SYSFS_FUNCTION_ALTERNATIVE( ssize_t (*store' not described in 'device_attribute'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260623190006.406571-1-rdunlap@infradead.org>
Pull perf tools updates from Arnaldo Carvalho de Melo:
- Introduce 'perf inject --aslr' to remap ASLR-randomized addresses in
perf.data files, enabling reproducible analysis across runs with
different address space layouts
- Refactor evsel out of sample processing paths: store evsel in struct
perf_sample and remove the redundant evsel parameter from tool APIs,
tracepoint handlers, hist entry iterators, and db-export, simplifying
the entire tool callback chain
- Switch architecture detection from string-based perf_env__arch()
comparisons to the numeric ELF e_machine field across the codebase
(capstone, print_insn, c2c, lock-contention, sort, sample-raw,
machine, header), making cross-analysis more robust
- Overhaul ARM CoreSight ETM tests: add deterministic and named_threads
workloads, speed up basic and disassembly tests, add process
attribution and concurrent threads tests, remove unused workloads and
duplicate tests, queue context packets for the frontend decoder
- Add ARM SPE IMPDEF event decoding for Arm Neoverse N1, store MIDR in
arm_spe_pkt for per-CPU event mapping, handle missing CPU IDs
gracefully
- Refactor libunwind support: remove the libunwind-local backend, make
register reading cross-platform, add RISC-V libunwind support, allow
dynamic selection between libdw and libunwind unwinding at runtime
- Extensive hardening of perf.data parsing against crafted files: add
bounds checks and byte-swap validation for session records, feature
sections, header attributes, BPF metadata, auxtrace errors,
compressed events, CPU maps, build ID notes, and ELF program headers.
Add minimum event size validation and file offset diagnostics
- Fix libdw API contract violations across dwarf-aux, libdw,
probe-finder, annotate-data, and debuginfo subsystems. Fix callchain
parent update in ORDER_CALLER mode, support DWARF line 0 in inline
lists, handle multiple address spaces in callchains
- Fix numerous 'perf sched' bugs: thread reference leaks, memory leaks,
heap overflows with cross-machine recordings, NULL dereferences,
replace BUG_ON assertions with graceful error handling, bounds-check
CPU indices, fix SIGCHLD vs pause() races in sched stats
- Overhaul the build system: move BPF skeleton generation out of
Makefile.perf into bpf_skel.mak, decouple pmu-events from the prepare
target, make beauty generated C code standalone .o files, compile BPF
skeletons with -mcpu=v3, fix continuous rebuilds, various cleanups
- Add 'perf test' JUnit XML reporting with -j/--junit option, split
monolithic test suites into sub-tests, add summary reporting,
refactor parallel poll loop, fix test failures on musl-based systems
- Fix 'perf c2c' memory leaks in hist entry and format list handling,
use-after-free in error paths, bounds-check CPU and node IDs
- Fix 'perf bpf' metadata leaks on duplicate insert and alloc failure,
bounds-check array offsets, validate event sizes and func_info
fields, add NULL checks
- Fix hwmon PMU: off-by-one null termination on sysfs reads, strlcpy
buffer overflow in parse_hwmon_filename(), fd 0 check, empty label
reads, scnprintf usage
- Fix symbols subsystem: bounds-check ELF and sysfs build ID note
iteration, validate p_filesz, fix 32-bit ELF bswap error, fix signed
overflow in size checks, bounds-check .gnu_debuglink section
- Fix tools lib api: null termination in filename__read_int/ull(),
uninitialized stack data in filename__write_int(), snprintf
truncation in mount_overload()
- Replace libbabeltrace with babeltrace2-ctf-writer for CTF conversion
in 'perf data'
- Add RISC-V SDT argument parsing for static tracepoints
- Add 'perf trace --show-cpu' option to display CPU id
- Add 'perf bench sched pipe --write-size' option
- Add a perf-specific .clang-format that overrides some kernel style
behaviors
- Update Intel vendor events for Alder Lake, Arrow Lake, Clearwater
Forest, Emerald Rapids, Granite Rapids, Grand Ridge, Lunar Lake,
Meteor Lake, Panther Lake, Sapphire Rapids, Sierra Forest
- Add IOMMU metrics for AMD and Intel
- Fix AMD event: switch l2_itlb_misses to
bp_l1_tlb_miss_l2_tlb_miss.all
- Add AMD IBS improvements: decode Streaming-store and Remote-Socket
flags, suppress bogus fields on Zen4+, skip privilege test on Zen6+
- Fix 'perf lock contention' SIGCHLD vs pause() race, allow 'mmap_lock'
in -L filter, enable end-timestamp for cgroup aggregation, fix
non-atomic data updates
- Fix 'perf stat' false NMI watchdog warning in aggregation modes,
bounds-check CPU index in topology callbacks, add aggr_nr metric
parser support for uncore scaling
- Fix 'perf timechart' memory leaks, CPU bounds checking,
use-after-free on corrupted callchains
- Fix 'perf inject' itrace branch stack synthesis, fix synthesized
sample size with branch stacks
- Fix DSO heap overflow on decompressed paths, uninitialized pathname
on fallback, set proper error codes
- Fix various snprintf/scnprintf usages to prevent buffer overflows and
truncation across the codebase
- Fix off-by-one stack buffer overflow in kallsyms__parse()
- Fix 'perf kwork' memory management, address sanitizer issues, bounds
check work->cpu
- Fix 'perf tpebs' concurrent stop races and PID reuse hazards
- Add O_CLOEXEC to open() calls and use mkostemp() for temporary files
to prevent file descriptor leaks to child processes
- Fix s390 Python extension TEXTREL by compiling as PIC
- Fix build with ASAN for jitdump
- Fix build failure due to btf_vlen() return type change
* tag 'perf-tools-for-v7.2-1-2026-06-22' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (343 commits)
perf bpf: Fix up build failure due to change of btf_vlen() return type
perf dso: Set standard errno on decompression failure
perf bpf: Validate array presence before casting BPF prog info pointers
perf c2c: Fix hist entry and format list leaks in c2c_he_free()
perf c2c: Free format list entries when c2c_hists__init() fails
perf cs-etm: Bounds-check CPU in cs_etm__get_queue()
perf cs-etm: Require full global header in auxtrace_info size check
perf cs-etm: Validate num_cpu before metadata allocation
perf machine: Use snprintf() for guestmount path construction
perf machine: Propagate machine__init() error to callers
perf trace: Guard __probe_ip suppression with evsel__is_probe()
perf evsel: Add lazy-initialized probe type detection helpers
perf evsel: Add no-libtraceevent stubs for evsel__field() and evsel__common_field()
perf cs-etm: Reject CPU IDs that would overflow signed comparison
perf c2c: Free format list entries when releasing c2c hist entries
perf bpf: Bounds-check array offsets in bpil_offs_to_addr()
perf bpf: Reject oversized BPF metadata events that truncate header.size
perf bpf: Validate func_info_rec_size and sub_id in synthesize_bpf_prog_name()
perf sched: Replace (void*)1 sentinel with proper runtime allocation
perf hwmon: Fix fd check to accept fd 0 in hwmon_pmu__describe_items()
...
Pull bpf updates from Alexei Starovoitov:
"Major changes:
- Recover from BPF arena page faults using a scratch page and add
ptep_try_set() for lockless empty-slot installs on x86 and arm64.
This allows BPF kfuncs to access arena pointers directly.
The 'arena_direct_access' stable branch was created for this work
and was pulled into sched-ext and bpf-next trees (Tejun Heo, Kumar
Kartikeya Dwivedi)
- Lift old restriction and support 6+ arguments in BPF programs and
kfuncs on x86 and arm64 (Yonghong Song, Puranjay Mohan)
Other features and fixes:
- Add 24-bit BTF vlen and reclaim unused bits in the BTF UAPI to ease
addition of new BTF kinds (Alan Maguire)
- Raise the maximum BPF call chain depth from 8 to 16 frames (Alexei
Starovoitov)
- Refactor object relationship tracking in the verifier and fix a
dynptr use-after-free bug (Amery Hung)
- Harden the signed program loader and reject exclusive maps as inner
maps (Daniel Borkmann)
- Replace the verifier min/max bounds fields with a circular number
(cnum) representation and improve 32->64 bit range refinements
(Eduard Zingerman)
- Introduce the arena library and runtime (libarena) with a buddy
allocator, rbtree and SPMC queue data structures, ASAN support and
a parallel test harness. Allow subprograms to return arena pointers
and switch to a BTF type-tag based __arena annotation (Emil
Tsalapatis)
- Cache build IDs in the sleepable stackmap path and avoid faultable
build ID reads under mm locks (Ihor Solodrai)
- Introduce the tracing_multi link to attach a single BPF program to
many kernel functions at once. Allow specifying the uprobe_multi
target via FD (Jiri Olsa)
- Extend the bpf_list family of kfuncs with bpf_list_add/del(), and
bpf_list_is_first/is_last/empty() (Kaitao Cheng)
- Extend the BPF syscall with common attributes support for
prog_load, btf_load and map_create (Leon Hwang)
- Wrap rhashtable as BPF map (Mykyta Yatsenko, Herbert Xu)
- Add sleepable support for tracepoint programs and fix deadlocks in
LRU map due to NMI reentry (Mykyta Yatsenko)
- Fix OOB access in bpf_flow_keys, fix nullness analysis of inner
arrays, enforce write checks for global subprograms (Nuoqi Gui)
- Report the maximum combined stack depth and print a breakdown of
instructions processed per subprogram (Paul Chaignon)
- Add an XDP load-balancer benchmark and arm64 JIT support for stack
arguments (Puranjay Mohan)
- Add kfuncs to traverse over wakeup_sources (Samuel Wu)
- Allow sleepable BPF programs to use LPM trie maps directly (Vlad
Poenaru)
- Many more fixes and cleanups across the verifier, BTF, sockmap,
devmap, bpffs, security hooks, s390/riscv/loongarch JITs,
rqspinlock, libbpf, bpftool, selftests"
* tag 'bpf-next-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (336 commits)
selftests/bpf: Work around llvm stack overflow in crypto progs
selftests/bpf: add test for bpf_msg_pop_data() overflow
bpf, sockmap: fix integer overflow in bpf_msg_pop_data() bounds check
sockmap: Fix use-after-free in udp_bpf_recvmsg()
bpf, sockmap: keep sk_msg copy state in sync
bpf, sockmap: Fix wrong rsge offset in bpf_msg_push_data()
bpf, sockmap: reject overflowing copy + len in bpf_msg_push_data()
selftsets/bpf: Retry map update on helper_fill_hashmap()
selftests/bpf: Add test for sleepable lsm_cgroup rejection
selftests/bpf: Add test to verify the fix for bpf_setsockopt() helper
bpf: Fix bpf_get/setsockopt to tos for ipv4-mapped ipv6 socket
selftests/bpf: Avoid static LLVM linking for cross builds
selftests/bpf: Use common CFLAGS for urandom_read
selftests/bpf: Initialize operation name before use
tools/bpf: build: Append extra cflags
libbpf: Initialize CFLAGS before including Makefile.include
bpftool: Append extra host flags
bpftool: Avoid adding EXTRA_CFLAGS to HOST_CFLAGS
bpftool: Pass host flags to bootstrap libbpf
selftests/bpf: correct CONFIG_PPC64 macro name in comment
...
Pull RTLA tool updates from Steven Rostedt:
- Fix discrepancy in --dump-tasks option
Due to a mistake, rtla-timerlat-hist used the CLI syntax
"--dump-task" instead of the documented "--dump-tasks". Change the
option to match both documentation and the other timerlat tool,
rtla-timerlat-top.
- Extend coverage of runtime tests
Cover both top and hist tools in all applicable test cases, add tests
for a few uncovered options, and extend checks for some existing
tests.
- Add unit tests for actions
rtla's actions feature is implemented in its source file and contains
non-trivial parsing logic. Cover it with unit tests.
- Stop record trace on interrupt
Fix a bug where an interval exists after receiving a signal in which
the main instance is stopped but the record instance is not, leading
to discrepancies in reported results and sometimes rtla hanging.
- Restore continue flag in actions_perform()
Fix a bug where rtla always continues tracing after hitting a
threshold even if the continue action was triggered just once, and
add tests verifying that the flag is reset properly.
- Migrate command line interface to libsubcmd
Replace rtla's argument parsing using getopt_long() with libsubcmd,
used by perf and objtool, to reuse existing code and auto-generate
better help messages. Extensive unit tests are included to detect
regressions.
- Add -A/--aligned option to timerlat tools
Add an option to align timerlat threads, based on the recently
introduced TIMERLAT_ALIGN option of the timerlat tracer, together
with unit tests and documentation.
- Document tests in README
Document how to run unit and runtime tests in rtla's README.txt,
including the dependencies needed to run them.
* tag 'trace-tools-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (26 commits)
rtla: Document tests in README
Documentation/rtla: Add -A/--aligned option
rtla/tests: Add unit tests for -A/--aligned option
rtla/timerlat: Add -A/--aligned CLI option
rtla/tests: Add unit tests for CLI option callbacks
rtla/tests: Add unit tests for _parse_args() functions
rtla: Parse cmdline using libsubcmd
tools subcmd: allow parsing distinct --opt and --no-opt
tools subcmd: support optarg as separate argument
rtla: Add libsubcmd dependency
rtla/tests: Add runtime tests for restoring continue flag
rtla/tests: Run runtime tests in temporary directory
rtla/tests: Add unit test for restoring continue flag
rtla/actions: Restore continue flag in actions_perform()
rtla: Stop the record trace on interrupt
rtla/tests: Add unit tests for actions module
rtla/tests: Add runtime tests for -C/--cgroup
rtla/tests: Add runtime test for -k and -u options
rtla/tests: Add runtime test for -H/--house-keeping
rtla/tests: Cover all hist options in runtime tests
...
Pull documentation updates from Jonathan Corbet:
"Things have calmed down a bit on the docs front, with no earthshaking
changes this time around:
- Ongoing work on the Japanese and Portuguese translations
- Better integration of the MAINTAINERS file into the rendered
documents, including a search interface
- A seemingly infinite supply of fixes for typos, minor grammatical
issues, and related problems that LLMs find with abandon"
* tag 'docs-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux: (93 commits)
docs: pt_BR: Translate 3.Early-stage.rst into Portuguese
docs: pt_BR: update "Purpose of Defconfigs" section in maintainer-soc.rst
Documentation: bug-hunting.rst: fix grammar
docs/ja_JP: translate submitting-patches.rst (interleaved-replies)
docs: Fix minor grammatical error
docs/{it_it,sp_SP,zh_CN,zh_TW}: update references to removed CONFIG_DEBUG_SLAB
Documentation: process: fix brackets
Documentation: arch: fix brackets
docs/dyndbg: explain flags parse 1st
docs/dyndbg: update examples \012 to \n
docs: kernel-parameters: Fix stale sticore file paths
docs: real-time: Fix duplicated sched(7) text
docs: kgdb: Fix stale source file paths
docs: sonypi: Fix stale header file path
docs: kernel-parameters: Remove sa1100ir IrDA parameter
iommu: Documentation: rearrange, update kernel-parameters
docs: md: fix grammar in speed_limit description
docs: changes.rst: restore pahole 1.26 minimum (regressed by sort)
Documentation: Fix syntax of kmalloc_objs example in coding style doc
docs: pt_BR: update maintainer-handbooks
...
tools/scripts/Makefile.include may expand EXTRA_CFLAGS in a future
change. This could alter the initialization of CFLAGS, as the default
options "-g -O2" would never be set once EXTRA_CFLAGS is expanded.
Prepare for this by moving the CFLAGS initialization before including
tools/scripts/Makefile.include, so it is not affected by the extended
EXTRA_CFLAGS.
Append EXTRA_CFLAGS to CFLAGS only after including Makefile.include and
place it last so that the extra flags propagate properly and can
override the default options.
tools/scripts/Makefile.include already appends $(CLANG_CROSS_FLAGS) to
CFLAGS, the Makefile appends $(CLANG_CROSS_FLAGS) again, remove the
redundant append.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Acked-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260602-tools_build_fix_zero_init_bpf_only-v2-4-c76e5250ea1c@arm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
mount_overload() builds an environment variable name like
"PERF_SYSFS_ENVIRONMENT" from fs->name. Two bugs:
1) snprintf() uses name_len as the buffer size instead of sizeof(upper_name).
For fs->name = "sysfs" (len=5), the output is truncated to "PERF" (4
chars + null), so getenv() never finds the intended variable.
2) mem_toupper() only uppercases name_len bytes, converting just the "PERF"
prefix rather than the full string including the filesystem name portion.
Fix by using sizeof(upper_name) for snprintf and strlen(upper_name) for
mem_toupper, so the full "PERF_SYSFS_ENVIRONMENT" string is correctly
formatted and uppercased.
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Fixes: 73ca85ad36 ("tools lib api fs: Add FSTYPE__mount() method")
Cc: Jiri Olsa <jolsa@kernel.org>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
filename__write_int() formats an integer into a 64-byte buffer with
sprintf() then passes sizeof(buf) (64) as the write length. This
writes all 64 bytes including uninitialized stack data past the
formatted string. Most sysfs files reject the oversized write,
making the function always return -1.
Fix by capturing the sprintf() return value and using it as the
write length.
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Fixes: 3b00ea9386 ("tools lib api fs: Add sysfs__write_int function")
Cc: Kan Liang <kan.liang@intel.com>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
filename__read_int() passes a stack buffer to read() using the full
sizeof(line) and then hands it to atoi() without null-terminating.
If a sysfs file fills the 64-byte buffer exactly, atoi() reads past
the array into uninitialized stack memory.
filename__read_ull_base() has the same issue with strtoull().
Fix both by reading sizeof(line) - 1 bytes and explicitly
null-terminating after a successful read.
Fixes: 3a351127cb ("tools lib fs: Adopt filename__read_int from tools/perf/")
Reported-by: sashiko-bot <sashiko-bot@kernel.org>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a bullet point to the libperf ABI TODO explaining the code
simplification benefit of widening struct perf_cpu.cpu from int16_t
to int: the narrow type forces defensive truncation checks at every
boundary where wider CPU indices are narrowed, and values > 32767
silently wrap to negative numbers (two's complement), bypassing
bounds validation without them.
Acked-by: Ian Rogers <irogers@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding bpf_program__attach_tracing_multi function for attaching
tracing program to multiple functions.
struct bpf_link *
bpf_program__attach_tracing_multi(const struct bpf_program *prog,
const char *pattern,
const struct bpf_tracing_multi_opts *opts);
User can specify functions to attach with 'pattern' argument that
allows wildcards (*?' supported) or provide BTF ids of functions
in array directly via opts argument. These options are mutually
exclusive.
When using BTF ids, user can also provide cookie value for each
provided id/function, that can be retrieved later in bpf program
with bpf_get_attach_cookie helper. Each cookie value is paired with
provided BTF id with the same array index.
Adding support to auto attach programs with following sections:
fsession.multi/<pattern>
fsession.multi.s/<pattern>
fentry.multi/<pattern>
fexit.multi/<pattern>
fentry.multi.s/<pattern>
fexit.multi.s/<pattern>
The provided <pattern> is used as 'pattern' argument in
bpf_program__attach_kprobe_multi_opts function.
The <pattern> allows to specify optional kernel module name with
following syntax:
<module>:<function_pattern>
In order to attach tracing_multi link to a module functions:
- program must be loaded with 'module' btf fd
(in attr::attach_btf_obj_fd)
- bpf_program__attach_tracing_multi must either have
pattern with module spec or BTF ids from the module
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20260606123955.345967-21-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding btf_type_is_traceable_func function to perform same checks
as the kernel's btf_distill_func_proto function to prevent attachment
on some of the functions.
Exporting the function via libbpf_internal.h because it will be used
by benchmark test in following changes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20260606123955.345967-20-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding support to use session attachment with tracing_multi link.
Adding new BPF_TRACE_FSESSION_MULTI program attach type, that follows
the BPF_TRACE_FSESSION behaviour but on the tracing_multi link.
Such program is called on entry and exit of the attached function
and allows to pass cookie value from entry to exit execution.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20260606123955.345967-16-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding new link to allow to attach program to multiple function
BTF IDs. The link is represented by struct bpf_tracing_multi_link.
To configure the link, new fields are added to bpf_attr::link_create
to pass array of BTF IDs;
struct {
__aligned_u64 ids;
__u32 cnt;
} tracing_multi;
Each BTF ID represents function (BTF_KIND_FUNC) that the link will
attach bpf program to.
We use previously added bpf_trampoline_multi_attach/detach functions
to attach/detach the link.
The linkinfo/fdinfo callbacks will be implemented in following changes.
Note this is supported only for archs (x86_64) with ftrace direct and
have single ops support.
CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS &&
CONFIG_HAVE_SINGLE_FTRACE_DIRECT_OPS
Note using sort_r (instead of plain sort) in check_dup_ids, because we
will use the swap callback in following changes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20260606123955.345967-14-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
