Pull RISC-V fix from Palmer Dabbelt
"Avoid trying to initialize memory regions outside the usable range"
* tag 'riscv-for-linus-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Fix usage of memblock_enforce_memory_limit
Pull powerpc fixes from Michael Ellerman:
- Four commits fixing various things in the new C VDSO code
- One fix for a 32-bit VMAP stack bug
- Two minor build fixes
Thanks to Cédric Le Goater, Christophe Leroy, and Will Springer.
* tag 'powerpc-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/32: Fix vmap stack - Properly set r1 before activating MMU on syscall too
powerpc/vdso: Fix DOTSYM for 32-bit LE VDSO
powerpc/vdso: Don't pass 64-bit ABI cflags to 32-bit VDSO
powerpc/vdso: Block R_PPC_REL24 relocations
powerpc/smp: Add __init to init_big_cores()
powerpc/time: Force inlining of get_tb()
powerpc/boot: Fix build of dts/fsl
Pull irq updates from Thomas Gleixner:
"This is the second attempt after the first one failed miserably and
got zapped to unblock the rest of the interrupt related patches.
A treewide cleanup of interrupt descriptor (ab)use with all sorts of
racy accesses, inefficient and disfunctional code. The goal is to
remove the export of irq_to_desc() to prevent these things from
creeping up again"
* tag 'irq-core-2020-12-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (30 commits)
genirq: Restrict export of irq_to_desc()
xen/events: Implement irq distribution
xen/events: Reduce irq_info:: Spurious_cnt storage size
xen/events: Only force affinity mask for percpu interrupts
xen/events: Use immediate affinity setting
xen/events: Remove disfunct affinity spreading
xen/events: Remove unused bind_evtchn_to_irq_lateeoi()
net/mlx5: Use effective interrupt affinity
net/mlx5: Replace irq_to_desc() abuse
net/mlx4: Use effective interrupt affinity
net/mlx4: Replace irq_to_desc() abuse
PCI: mobiveil: Use irq_data_get_irq_chip_data()
PCI: xilinx-nwl: Use irq_data_get_irq_chip_data()
NTB/msi: Use irq_has_action()
mfd: ab8500-debugfs: Remove the racy fiddling with irq_desc
pinctrl: nomadik: Use irq_has_action()
drm/i915/pmu: Replace open coded kstat_irqs() copy
drm/i915/lpe_audio: Remove pointless irq_to_desc() usage
s390/irq: Use irq_desc_kstat_cpu() in show_msi_interrupt()
parisc/irq: Use irq_desc_kstat_cpu() in show_interrupts()
...
Pull EFI updates from Borislav Petkov:
"These got delayed due to a last minute ia64 build issue which got
fixed in the meantime.
EFI updates collected by Ard Biesheuvel:
- Don't move BSS section around pointlessly in the x86 decompressor
- Refactor helper for discovering the EFI secure boot mode
- Wire up EFI secure boot to IMA for arm64
- Some fixes for the capsule loader
- Expose the RT_PROP table via the EFI test module
- Relax DT and kernel placement restrictions on ARM
with a few followup fixes:
- fix the build breakage on IA64 caused by recent capsule loader
changes
- suppress a type mismatch build warning in the expansion of
EFI_PHYS_ALIGN on ARM"
* tag 'efi_updates_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: arm: force use of unsigned type for EFI_PHYS_ALIGN
efi: ia64: disable the capsule loader
efi: stub: get rid of efi_get_max_fdt_addr()
efi/efi_test: read RuntimeServicesSupported
efi: arm: reduce minimum alignment of uncompressed kernel
efi: capsule: clean scatter-gather entries from the D-cache
efi: capsule: use atomic kmap for transient sglist mappings
efi: x86/xen: switch to efi_get_secureboot_mode helper
arm64/ima: add ima_arch support
ima: generalize x86/EFI arch glue for other EFI architectures
efi: generalize efi_get_secureboot
efi/libstub: EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER should not default to yes
efi/x86: Only copy the compressed kernel image in efi_relocate_kernel()
efi/libstub/x86: simplify efi_is_native()
Pull Kbuild updates from Masahiro Yamada:
- Use /usr/bin/env for shebang lines in scripts
- Remove useless -Wnested-externs warning flag
- Update documents
- Refactor log handling in modpost
- Stop building modules without MODULE_LICENSE() tag
- Make the insane combination of 'static' and EXPORT_SYMBOL an error
- Improve genksyms to handle _Static_assert()
* tag 'kbuild-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
Documentation/kbuild: Document platform dependency practises
Documentation/kbuild: Document COMPILE_TEST dependencies
genksyms: Ignore module scoped _Static_assert()
modpost: turn static exports into error
modpost: turn section mismatches to error from fatal()
modpost: change license incompatibility to error() from fatal()
modpost: turn missing MODULE_LICENSE() into error
modpost: refactor error handling and clarify error/fatal difference
modpost: rename merror() to error()
kbuild: don't hardcode depmod path
kbuild: doc: document subdir-y syntax
kbuild: doc: clarify the difference between extra-y and always-y
kbuild: doc: split if_changed explanation to a separate section
kbuild: doc: merge 'Special Rules' and 'Custom kbuild commands' sections
kbuild: doc: fix 'List directories to visit when descending' section
kbuild: doc: replace arch/$(ARCH)/ with arch/$(SRCARCH)/
kbuild: doc: update the description about kbuild Makefiles
Makefile.extrawarn: remove -Wnested-externs warning
tweewide: Fix most Shebang lines
Merge KASAN updates from Andrew Morton.
This adds a new hardware tag-based mode to KASAN. The new mode is
similar to the existing software tag-based KASAN, but relies on arm64
Memory Tagging Extension (MTE) to perform memory and pointer tagging
(instead of shadow memory and compiler instrumentation).
By Andrey Konovalov and Vincenzo Frascino.
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (60 commits)
kasan: update documentation
kasan, mm: allow cache merging with no metadata
kasan: sanitize objects when metadata doesn't fit
kasan: clarify comment in __kasan_kfree_large
kasan: simplify assign_tag and set_tag calls
kasan: don't round_up too much
kasan, mm: rename kasan_poison_kfree
kasan, mm: check kasan_enabled in annotations
kasan: add and integrate kasan boot parameters
kasan: inline (un)poison_range and check_invalid_free
kasan: open-code kasan_unpoison_slab
kasan: inline random_tag for HW_TAGS
kasan: inline kasan_reset_tag for tag-based modes
kasan: remove __kasan_unpoison_stack
kasan: allow VMAP_STACK for HW_TAGS mode
kasan, arm64: unpoison stack only with CONFIG_KASAN_STACK
kasan: introduce set_alloc_info
kasan: rename get_alloc/free_info
kasan: simplify quarantine_put call site
kselftest/arm64: check GCR_EL1 after context switch
...
Pull ARM updates from Russell King:
- Rework phys/virt translation
- Add KASan support
- Move DT out of linear map region
- Use more PC-relative addressing in assembly
- Remove FP emulation handling while in kernel mode
- Link with '-z norelro'
- remove old check for GCC <= 4.2 in ARM unwinder code
- disable big endian if using clang's linker
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (46 commits)
ARM: 9027/1: head.S: explicitly map DT even if it lives in the first physical section
ARM: 9038/1: Link with '-z norelro'
ARM: 9037/1: uncompress: Add OF_DT_MAGIC macro
ARM: 9036/1: uncompress: Fix dbgadtb size parameter name
ARM: 9035/1: uncompress: Add be32tocpu macro
ARM: 9033/1: arm/smp: Drop the macro S(x,s)
ARM: 9032/1: arm/mm: Convert PUD level pgtable helper macros into functions
ARM: 9031/1: hyp-stub: remove unused .L__boot_cpu_mode_offset symbol
ARM: 9044/1: vfp: use undef hook for VFP support detection
ARM: 9034/1: __div64_32(): straighten up inline asm constraints
ARM: 9030/1: entry: omit FP emulation for UND exceptions taken in kernel mode
ARM: 9029/1: Make iwmmxt.S support Clang's integrated assembler
ARM: 9028/1: disable KASAN in call stack capturing routines
ARM: 9026/1: unwind: remove old check for GCC <= 4.2
ARM: 9025/1: Kconfig: CPU_BIG_ENDIAN depends on !LD_IS_LLD
ARM: 9024/1: Drop useless cast of "u64" to "long long"
ARM: 9023/1: Spelling s/mmeory/memory/
ARM: 9022/1: Change arch/arm/lib/mem*.S to use WEAK instead of .weak
ARM: kvm: replace open coded VA->PA calculations with adr_l call
ARM: head.S: use PC relative insn sequence to calculate PHYS_OFFSET
...
Pull dma-mapping updates from Christoph Hellwig:
- support for a partial IOMMU bypass (Alexey Kardashevskiy)
- add a DMA API benchmark (Barry Song)
- misc fixes (Tiezhu Yang, tangjianqiang)
* tag 'dma-mapping-5.11' of git://git.infradead.org/users/hch/dma-mapping:
selftests/dma: add test application for DMA_MAP_BENCHMARK
dma-mapping: add benchmark support for streaming DMA APIs
dma-contiguous: fix a typo error in a comment
dma-pool: no need to check return value of debugfs_create functions
powerpc/dma: Fallback to dma_ops when persistent memory present
dma-mapping: Allow mixing bypass and mapped DMA operation
When a split lock is detected always make sure to disable interrupts
before returning from the trap handler.
The kernel exit code assumes that all exits run with interrupts
disabled, otherwise the SWAPGS sequence can race against interrupts and
cause recursing page faults and later panics.
The problem will only happen on CPUs with split lock disable
functionality, so Icelake Server, Tiger Lake, Snow Ridge, Jacobsville.
Fixes: ca4c6a9858 ("x86/traps: Make interrupt enable/disable symmetric in C code")
Fixes: bce9b042ec ("x86/traps: Disable interrupts in exc_aligment_check()") # v5.8+
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull clk updates from Stephen Boyd:
"The core framework got some nice improvements this time around. We
gained the ability to get struct clk pointers from a struct clk_hw so
that clk providers can consume the clks they provide, if they need to
do something like that. This has been a long missing part of the clk
provider API that will help us move away from exposing a struct clk
pointer in the struct clk_hw. Tracepoints are added for the
clk_set_rate() "range" functions, similar to the tracepoints we
already have for clk_set_rate() and we added a column to debugfs to
help developers understand the hardware enable state of clks in case
firmware or bootloader state is different than what is expected.
Overall the core changes are mostly improving the clk driver writing
experience.
At the driver level, we have the usual collection of driver updates
and new drivers for new SoCs. This time around the Qualcomm folks
introduced a good handful of clk drivers for various parts of three or
four SoCs. The SiFive folks added a new clk driver for their FU740
SoCs, coming in second on the diffstat and then Atmel AT91 and Amlogic
SoCs had lots of work done after that for various new features. One
last thing to note in the driver area is that the i.MX driver has
gained a new binding to support SCU clks after being on the list for
many months. It uses a two cell binding which is sort of rare in clk
DT bindings. Beyond that we have the usual set of driver fixes and
tweaks that come from more testing and finding out that some
configuration was wrong or that a driver could support being built as
a module.
Summary:
Core:
- Add some trace points for clk_set_rate() "range" functions
- Add hardware enable information to clk_summary debugfs
- Replace clk-provider.h with of_clk.h when possible
- Add devm variant of clk_notifier_register()
- Add clk_hw_get_clk() to generate a struct clk from a struct clk_hw
New Drivers:
- Bindings for Canaan K210 SoC clks
- Support for SiFive FU740 PRCI
- Camera clks on Qualcomm SC7180 SoCs
- GCC and RPMh clks on Qualcomm SDX55 SoCs
- RPMh clks on Qualcomm SM8350 SoCs
- LPASS clks on Qualcomm SM8250 SoCs
Updates:
- DVFS support for AT91 clk driver
- Update git repo branch for Renesas clock drivers
- Add camera (CSI) and video-in (VIN) clocks on Renesas R-Car V3U
- Add RPC (QSPI/HyperFLASH) clocks on Renesas RZ/G2M, RZ/G2N, and RZ/G2E
- Stop using __raw_*() I/O accessors in Renesas clk drivers
- One more conversion of DT bindings to json-schema
- Make i.MX clk-gate2 driver more flexible
- New two cell binding for i.MX SCU clks
- Drop of_match_ptr() in i.MX8 clk drivers
- Add arch dependencies for Rockchip clk drivers
- Fix i2s on Rockchip rk3066
- Add MIPI DSI clks on Amlogic axg and g12 SoCs
- Support modular builds of Amlogic clk drivers
- Fix an Amlogic Video PLL clock dependency
- Samsung Kconfig dependencies updates for better compile test coverage
- Refactoring of the Samsung PLL clocks driver
- Small Tegra driver cleanups
- Minor fixes to Ingenic and VC5 clk drivers
- Cleanup patches to remove unused variables and plug memory leaks"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits)
dt-binding: clock: Document canaan,k210-clk bindings
dt-bindings: Add Canaan vendor prefix
clk: vc5: Use "idt,voltage-microvolt" instead of "idt,voltage-microvolts"
clk: ingenic: Fix divider calculation with div tables
clk: sunxi-ng: Make sure divider tables have sentinel
clk: s2mps11: Fix a resource leak in error handling paths in the probe function
clk: mvebu: a3700: fix the XTAL MODE pin to MPP1_9
clk: si5351: Wait for bit clear after PLL reset
clk: at91: sam9x60: remove atmel,osc-bypass support
clk: at91: sama7g5: register cpu clock
clk: at91: clk-master: re-factor master clock
clk: at91: sama7g5: do not allow cpu pll to go higher than 1GHz
clk: at91: sama7g5: decrease lower limit for MCK0 rate
clk: at91: sama7g5: remove mck0 from parent list of other clocks
clk: at91: clk-sam9x60-pll: allow runtime changes for pll
clk: at91: sama7g5: add 5th divisor for mck0 layout and characteristics
clk: at91: clk-master: add 5th divisor for mck master
clk: at91: sama7g5: allow SYS and CPU PLLs to be exported and referenced in DT
dt-bindings: clock: at91: add sama7g5 pll defines
clk: at91: sama7g5: fix compilation error
...
We need r1 to be properly set before activating MMU, otherwise any new
exception taken while saving registers into the stack in syscall
prologs will use the user stack, which is wrong and will even lockup
or crash when KUAP is selected.
Do that by switching the meaning of r11 and r1 until we have saved r1
to the stack: copy r1 into r11 and setup the new stack pointer in r1.
To avoid complicating and impacting all generic and specific prolog
code (and more), copy back r1 into r11 once r11 is save onto
the stack.
We could get rid of copying r1 back and forth at the cost of rewriting
everything to use r1 instead of r11 all the way when CONFIG_VMAP_STACK
is set, but the effort is probably not worth it for now.
Fixes: da7bb43ab9 ("powerpc/32: Fix vmap stack - Properly set r1 before activating MMU")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/a3d819d5c348cee9783a311d5d3f3ba9b48fd219.1608531452.git.christophe.leroy@csgroup.eu
The early ATAGS/DT mapping code uses SECTION_SHIFT to mask low order
bits of R2, and decides that no ATAGS/DTB were provided if the resulting
value is 0x0.
This means that on systems where DRAM starts at 0x0 (such as Raspberry
Pi), no explicit mapping of the DT will be created if R2 points into the
first 1 MB section of memory. This was not a problem before, because the
decompressed kernel is loaded at the base of DRAM and mapped using
sections as well, and so as long as the DT is referenced via a virtual
address that uses the same translation (the linear map, in this case),
things work fine.
However, commit 7a1be318f5 ("9012/1: move device tree mapping out of
linear region") changes this, and now the DT is referenced via a virtual
address that is disjoint from the linear mapping of DRAM, and so we need
the early code to create the DT mapping unconditionally.
So let's create the early DT mapping for any value of R2 != 0x0.
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
When linking a multi_v7_defconfig + CONFIG_KASAN=y kernel with
LD=ld.lld, the following error occurs:
$ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- LLVM=1 zImage
ld.lld: error: section: .exit.data is not contiguous with other relro sections
LLD defaults to '-z relro', which is unneeded for the kernel because
program headers are not used nor is there any position independent code
generation or linking for ARM. Add '-z norelro' to LDFLAGS_vmlinux to
avoid this error.
Link: https://github.com/ClangBuiltLinux/linux/issues/1189
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The DTB magic marker is stored as a 32-bit big-endian value, and thus
depends on the CPU's endianness. Add a macro to define this value in
native endianness, to reduce #ifdef clutter and (future) duplication.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
DTB stores all values as 32-bit big-endian integers.
Add a macro to convert such values to native CPU endianness, to reduce
duplication.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Commit aaac373317 ("ARM: kvm: replace open coded VA->PA calculations
with adr_l call") removed all uses of .L__boot_cpu_mode_offset, so there
is no longer a need to define it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Commit f77ac2e378 ("ARM: 9030/1: entry: omit FP emulation for UND
exceptions taken in kernel mode") failed to take into account that there
is in fact a case where we relied on this code path: during boot, the
VFP detection code issues a read of FPSID, which will trigger an undef
exception on cores that lack VFP support.
So let's reinstate this logic using an undef hook which is registered
only for the duration of the initcall to vpf_init(), and which sets
VFP_arch to a non-zero value - as before - if no VFP support is present.
Fixes: f77ac2e378 ("ARM: 9030/1: entry: omit FP emulation for UND ...")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Skirmisher reported on IRC that the 32-bit LE VDSO was hanging. This
turned out to be due to a branch to self in eg. __kernel_gettimeofday.
Looking at the disassembly with objdump -dR shows why:
00000528 <__kernel_gettimeofday>:
528: f0 ff 21 94 stwu r1,-16(r1)
52c: a6 02 08 7c mflr r0
530: f0 ff 21 94 stwu r1,-16(r1)
534: 14 00 01 90 stw r0,20(r1)
538: 05 00 9f 42 bcl 20,4*cr7+so,53c <__kernel_gettimeofday+0x14>
53c: a6 02 a8 7c mflr r5
540: ff ff a5 3c addis r5,r5,-1
544: c4 fa a5 38 addi r5,r5,-1340
548: f0 00 a5 38 addi r5,r5,240
54c: 01 00 00 48 bl 54c <__kernel_gettimeofday+0x24>
54c: R_PPC_REL24 .__c_kernel_gettimeofday
Because we don't process relocations for the VDSO, this branch remains
a branch from 0x54c to 0x54c.
With the preceding patch to prohibit R_PPC_REL24 relocations, we
instead get a build failure:
0000054c R_PPC_REL24 .__c_kernel_gettimeofday
00000598 R_PPC_REL24 .__c_kernel_clock_gettime
000005e4 R_PPC_REL24 .__c_kernel_clock_gettime64
00000630 R_PPC_REL24 .__c_kernel_clock_getres
0000067c R_PPC_REL24 .__c_kernel_time
arch/powerpc/kernel/vdso32/vdso32.so.dbg: dynamic relocations are not supported
The root cause is that we're branching to `.__c_kernel_gettimeofday`.
But this is 32-bit LE code, which doesn't use function descriptors, so
there are no dot symbols.
The reason we're trying to branch to a dot symbol is because we're
using the DOTSYM macro, but the ifdefs we use to define the DOTSYM
macro do not currently work for 32-bit LE.
So like previous commits we need to differentiate if the current
compilation unit is 64-bit, rather than the kernel as a whole. ie.
switch from CONFIG_PPC64 to __powerpc64__.
With that fixed 32-bit LE code gets the empty version of DOTSYM, which
just resolves to the original symbol name, leading to a direct branch
and no relocations:
000003f8 <__kernel_gettimeofday>:
3f8: f0 ff 21 94 stwu r1,-16(r1)
3fc: a6 02 08 7c mflr r0
400: f0 ff 21 94 stwu r1,-16(r1)
404: 14 00 01 90 stw r0,20(r1)
408: 05 00 9f 42 bcl 20,4*cr7+so,40c <__kernel_gettimeofday+0x14>
40c: a6 02 a8 7c mflr r5
410: ff ff a5 3c addis r5,r5,-1
414: f4 fb a5 38 addi r5,r5,-1036
418: f0 00 a5 38 addi r5,r5,240
41c: 85 06 00 48 bl aa0 <__c_kernel_gettimeofday>
Fixes: ab037dd87a ("powerpc/vdso: Switch VDSO to generic C implementation.")
Reported-by: "Will Springer <skirmisher@protonmail.com>"
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201218111619.1206391-3-mpe@ellerman.id.au
When building the 32-bit VDSO, we are building 32-bit code as part of
a 64-bit kernel build. That requires us to tweak the cflags to trick
the compiler into building 32-bit code for us. The main way we do that
is by passing -m32, but there are other options that affect code
generation and ABI selection.
In particular when building vgettimeofday.c, we end up passing
-mcall-aixdesc because it's in KBUILD_CFLAGS, which causes the
compiler to generate function descriptors, and dot symbols, eg:
$ nm arch/powerpc/kernel/vdso32/vgettimeofday.o
000005d0 T .__c_kernel_clock_getres
00000024 D __c_kernel_clock_getres
...
We get away with that at the moment because we also use the DOTSYM
macro, and that is also incorrectly prepending a '.' in 32-bit VDSO
code due to a separate bug.
But we shouldn't be generating function descriptors for this file,
there's no 32-bit ABI that includes function descriptors, so the
resulting object file is some frankenstein and it's surprising that it
even links.
So filter out all the ABI-related options we add to CFLAGS for 64-bit
builds, so that they're not used when building 32-bit code. With that
we only see regular text symbols:
$ nm arch/powerpc/kernel/vdso32/vgettimeofday.o michael@alpine1-p1
000005d0 T __c_kernel_clock_getres
00000000 T __c_kernel_clock_gettime
00000200 T __c_kernel_clock_gettime64
00000410 T __c_kernel_gettimeofday
00000650 T __c_kernel_time
Fixes: ab037dd87a ("powerpc/vdso: Switch VDSO to generic C implementation.")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201218111619.1206391-2-mpe@ellerman.id.au
Add R_PPC_REL24 relocations to the list of relocations we do NOT
support in the VDSO.
These are generated in some cases and we do not support relocating
them at runtime, so if they appear then the VDSO will not work at
runtime, therefore it's preferable to break the build if we see them.
Fixes: ab037dd87a ("powerpc/vdso: Switch VDSO to generic C implementation.")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201218111619.1206391-1-mpe@ellerman.id.au
It fixes this link warning:
WARNING: modpost: vmlinux.o(.text.unlikely+0x2d98): Section mismatch in reference from the function init_big_cores.isra.0() to the function .init.text:init_thread_group_cache_map()
The function init_big_cores.isra.0() references
the function __init init_thread_group_cache_map().
This is often because init_big_cores.isra.0 lacks a __init
annotation or the annotation of init_thread_group_cache_map is wrong.
Fixes: 425752c63b ("powerpc: Detect the presence of big-cores via "ibm, thread-groups"")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201221074154.403779-1-clg@kaod.org
The lkp robot reported that some configs fail to build, for example
mpc85xx_smp_defconfig, with:
cc1: fatal error: opening output file arch/powerpc/boot/dts/fsl/.mpc8540ads.dtb.dts.tmp: No such file or directory
This bisects to:
cc8a51ca6f ("kbuild: always create directories of targets")
Although that commit claims to be about in-tree builds, it somehow
breaks out-of-tree builds. But presumably it's just exposing a latent
bug in our Makefiles.
We can fix it by adding to targets for dts/fsl in the same way that we
do for dts.
Fixes: cc8a51ca6f ("kbuild: always create directories of targets")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201215032906.473460-1-mpe@ellerman.id.au
