BCM5325 and BCM5365 are part of a much older generation of switches which,
due to their limited number of ports and VLAN entries (up to 256) allowed
a single 64-bit register to hold a full ARL entry.
This requires a little bit of massaging when reading, writing and
converting ARL entries in both directions.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://patch.msgid.link/20250614080000.1884236-6-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for legacy Broadcom FCS tags, which are similar to
DSA_TAG_PROTO_BRCM_LEGACY.
BCM5325 and BCM5365 switches require including the original FCS value and
length, as opposed to BCM63xx switches.
Adding the original FCS value and length to DSA_TAG_PROTO_BRCM_LEGACY would
impact performance of BCM63xx switches, so it's better to create a new tag.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20250614080000.1884236-3-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is little need to have phy_intf_sel as a member of struct
visconti_eth when we have the PHY interface mode available from
phylink in visconti_eth_set_clk_tx_rate(). Without multiple
interface support, phylink is fixed to supporting only
plat->phy_interface, so we can be sure that "interface" passed
into this function is the same as plat->phy_interface.
Make phy_intf_sel local to visconti_eth_init_hw() and clean up.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1uRH2G-004UyY-GD@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rather than testing dwmac->phy_intf_sel several times for the same
values in this function, group the code together. The only part
which was common was stopping the internal clock before programming
the clock setting.
This further improves the readability of this function.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/E1uRH26-004UyM-9G@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Justin Lai says:
====================
Link NAPI instances to queues and IRQs
This patch series introduces netdev-genl support to rtase, enabling
user-space applications to query the relationships between IRQs,
queues, and NAPI instances.
====================
Link: https://patch.msgid.link/20250616032226.7318-1-justinlai0215@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch corrects several logging and error message in nettest.c:
- Corrects function name in log messages "setsockopt" -> "getsockopt".
- Closes missing parentheses in "setsockopt(IPV6_FREEBIND)".
- Replaces misleading error text ("Invalid port") with the correct
description ("Invalid prefix length").
- remove Redundant wording like "status from status" and clarifies
context in IPC error messages.
These changes improve readability and aid in debugging test output.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250615084822.1344759-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Neal Cardwell says:
====================
tcp: remove obsolete RFC3517/RFC6675 code
RACK-TLP loss detection has been enabled as the default loss detection
algorithm for Linux TCP since 2018, in:
commit b38a51fec1 ("tcp: disable RFC6675 loss detection")
In case users ran into unexpected bugs or performance regressions,
that commit allowed Linux system administrators to revert to using
RFC3517/RFC6675 loss recovery by setting net.ipv4.tcp_recovery to 0.
In the seven years since 2018, our team has not heard reports of
anyone reverting Linux TCP to use RFC3517/RFC6675 loss recovery, and
we can't find any record in web searches of such a revert.
RACK-TLP was published as a standards-track RFC, RFC8985, in February
2021.
Several other major TCP implementations have default-enabled RACK-TLP
at this point as well.
RACK-TLP offers several significant performance advantages over
RFC3517/RFC6675 loss recovery, including much better performance in
the common cases of tail drops, lost retransmissions, and reordering.
It is now time to remove the obsolete and unused RFC3517/RFC6675 loss
recovery code. This will allow a substantial simplification of the
Linux TCP code base, and removes 12 bytes of state in every tcp_sock
for 64-bit machines (8 bytes on 32-bit machines).
To arrange the commits in reasonable sizes, this patch series is split
into 3 commits:
(1) Removes the core RFC3517/RFC6675 logic.
(2) Removes the RFC3517/RFC6675 hint state and the first layer of logic that
updates that state.
(3) Removes the emptied-out tcp_clear_retrans_hints_partial() helper function
and all of its call sites.
====================
Link: https://patch.msgid.link/20250615001435.2390793-1-ncardwell.sw@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that obsolete RFC3517/RFC6675 TCP loss detection has been removed,
we can remove the somewhat complex and intrusive code to maintain its
hint state: lost_skb_hint and lost_cnt_hint.
This commit makes tcp_clear_retrans_hints_partial() empty. We will
remove tcp_clear_retrans_hints_partial() and its call sites in the
next commit.
Suggested-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250615001435.2390793-3-ncardwell.sw@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RACK-TLP loss detection has been enabled as the default loss detection
algorithm for Linux TCP since 2018, in:
commit b38a51fec1 ("tcp: disable RFC6675 loss detection")
In case users ran into unexpected bugs or performance regressions,
that commit allowed Linux system administrators to revert to using
RFC3517/RFC6675 loss recovery by setting net.ipv4.tcp_recovery to 0.
In the seven years since 2018, our team has not heard reports of
anyone reverting Linux TCP to use RFC3517/RFC6675 loss recovery, and
we can't find any record in web searches of such a revert.
RACK-TLP was published as a standards-track RFC, RFC8985, in February
2021.
Several other major TCP implementations have default-enabled RACK-TLP
at this point as well.
RACK-TLP offers several significant performance advantages over
RFC3517/RFC6675 loss recovery, including much better performance in
the common cases of tail drops, lost retransmissions, and reordering.
It is now time to remove the obsolete and unused RFC3517/RFC6675 loss
recovery code. This will allow a substantial simplification of the
Linux TCP code base, and removes 12 bytes of state in every tcp_sock
for 64-bit machines (8 bytes on 32-bit machines).
To arrange the commits in reasonable sizes, this patch series is split
into 3 commits. The following 2 commits remove bookkeeping state and
code that is no longer needed after this removal of RFC3517/RFC6675
loss recovery.
Suggested-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250615001435.2390793-2-ncardwell.sw@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Increase the coverage of test for UAF due to socket unbinding, and losing
transport in general. It's a follow up to commit 301a62dfb0 ("vsock/test:
Add test for UAF due to socket unbinding") and discussion in [1].
The idea remains the same: take an unconnected stream socket with a
transport assigned and then attempt to switch the transport by trying (and
failing) to connect to some other CID. Now do this iterating over all the
well known CIDs (plus one).
While at it, drop the redundant synchronization between client and server.
Some single-transport setups can't be tested effectively; a warning is
issued. Depending on transports available, a variety of splats are possible
on unpatched machines. After reverting commit 78dafe1cf3 ("vsock: Orphan
socket after transport release") and commit fcdd2242c0 ("vsock: Keep the
binding until socket destruction"):
BUG: KASAN: slab-use-after-free in __vsock_bind+0x61f/0x720
Read of size 4 at addr ffff88811ff46b54 by task vsock_test/1475
Call Trace:
dump_stack_lvl+0x68/0x90
print_report+0x170/0x53d
kasan_report+0xc2/0x180
__vsock_bind+0x61f/0x720
vsock_connect+0x727/0xc40
__sys_connect+0xe8/0x100
__x64_sys_connect+0x6e/0xc0
do_syscall_64+0x92/0x1c0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
WARNING: CPU: 0 PID: 1475 at net/vmw_vsock/virtio_transport_common.c:37 virtio_transport_send_pkt_info+0xb2b/0x1160
Call Trace:
virtio_transport_connect+0x90/0xb0
vsock_connect+0x782/0xc40
__sys_connect+0xe8/0x100
__x64_sys_connect+0x6e/0xc0
do_syscall_64+0x92/0x1c0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
RIP: 0010:sock_has_perm+0xa7/0x2a0
Call Trace:
selinux_socket_connect_helper.isra.0+0xbc/0x450
selinux_socket_connect+0x3b/0x70
security_socket_connect+0x31/0xd0
__sys_connect_file+0x79/0x1f0
__sys_connect+0xe8/0x100
__x64_sys_connect+0x6e/0xc0
do_syscall_64+0x92/0x1c0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 7 PID: 1518 at lib/refcount.c:25 refcount_warn_saturate+0xdd/0x140
RIP: 0010:refcount_warn_saturate+0xdd/0x140
Call Trace:
__vsock_bind+0x65e/0x720
vsock_connect+0x727/0xc40
__sys_connect+0xe8/0x100
__x64_sys_connect+0x6e/0xc0
do_syscall_64+0x92/0x1c0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
refcount_t: underflow; use-after-free.
WARNING: CPU: 0 PID: 1475 at lib/refcount.c:28 refcount_warn_saturate+0x12b/0x140
RIP: 0010:refcount_warn_saturate+0x12b/0x140
Call Trace:
vsock_remove_bound+0x18f/0x280
__vsock_release+0x371/0x480
vsock_release+0x88/0x120
__sock_release+0xaa/0x260
sock_close+0x14/0x20
__fput+0x35a/0xaa0
task_work_run+0xff/0x1c0
do_exit+0x849/0x24c0
make_task_dead+0xf3/0x110
rewind_stack_and_make_dead+0x16/0x20
[1]: https://lore.kernel.org/netdev/CAGxU2F5zhfWymY8u0hrKksW8PumXAYz-9_qRmW==92oAx1BX3g@mail.gmail.com/
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250611-vsock-test-inc-cov-v3-3-5834060d9c20@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Return a bitmap of registered vsock transports. As guesstimated by grepping
/proc/kallsyms (CONFIG_KALLSYMS=y) for known symbols of type `struct
vsock_transport`, or `struct virtio_transport` in case the vsock_transport
is embedded within.
Note that the way `enum transport` and `transport_ksyms[]` are defined
triggers checkpatch.pl:
util.h:11: ERROR: Macros with complex values should be enclosed in parentheses
util.h:20: ERROR: Macros with complex values should be enclosed in parentheses
util.h:20: WARNING: Argument 'symbol' is not used in function-like macro
util.h:28: WARNING: Argument 'name' is not used in function-like macro
While commit 15d4734c7a ("checkpatch: qualify do-while-0 advice")
suggests it is known that the ERRORs heuristics are insufficient, I can not
find many other places where preprocessor is used in this
checkpatch-unhappy fashion. Notable exception being bcachefs, e.g.
fs/bcachefs/alloc_background_format.h. WARNINGs regarding unused macro
arguments seem more common, e.g. __ASM_SEL in arch/x86/include/asm/asm.h.
In other words, this might be unnecessarily complex. The same can be
achieved by just telling human to keep the order:
enum transport {
TRANSPORT_LOOPBACK = BIT(0),
TRANSPORT_VIRTIO = BIT(1),
TRANSPORT_VHOST = BIT(2),
TRANSPORT_VMCI = BIT(3),
TRANSPORT_HYPERV = BIT(4),
TRANSPORT_NUM = 5,
};
#define KSYM_ENTRY(sym) "d " sym "_transport"
/* Keep `enum transport` order */
static const char * const transport_ksyms[] = {
KSYM_ENTRY("loopback"),
KSYM_ENTRY("virtio"),
KSYM_ENTRY("vhost"),
KSYM_ENTRY("vmci"),
KSYM_ENTRY("vhs"),
};
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Tested-by: Luigi Leonardi <leonardi@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250611-vsock-test-inc-cov-v3-2-5834060d9c20@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shradha Gupta says:
====================
Allow dyn MSI-X vector allocation of MANA
In this patchset we want to enable the MANA driver to be able to
allocate MSI-X vectors in PCI dynamically.
The first patch exports pci_msix_prepare_desc() in PCI to be able to
correctly prepare descriptors for dynamically added MSI-X vectors.
The second patch adds the support of dynamic vector allocation in
pci-hyperv PCI controller by enabling the MSI_FLAG_PCI_MSIX_ALLOC_DYN
flag and using the pci_msix_prepare_desc() exported in first patch.
The third patch adds a detailed description of the irq_setup(), to
help understand the function design better.
The fourth patch is a preparation patch for mana changes to support
dynamic IRQ allocation. It contains changes in irq_setup() to allow
skipping first sibling CPU sets, in case certain IRQs are already
affinitized to them.
The fifth patch has the changes in MANA driver to be able to allocate
MSI-X vectors dynamically. If the support does not exist it defaults to
older behavior.
* 'shradha_v6.16-rc1' of https://github.com/shradhagupta6/linux:
net: mana: Allocate MSI-X vectors dynamically
net: mana: Allow irq_setup() to skip cpus for affinity
net: mana: explain irq_setup() algorithm
PCI: hv: Allow dynamic MSI-X vector allocation
PCI/MSI: Export pci_msix_prepare_desc() for dynamic MSI-X allocations
====================
Link: https://patch.msgid.link/1749650984-9193-1-git-send-email-shradhagupta@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Both PF and VF have rx-vlan-offload enabled, however, the PCVLANR1/2
registers are resources controlled by PF, so VF cannot access these
two registers. Fortunately, the hardware provides SICVLANR1/2 registers
for each SI to reflect the value of PCVLANR1/2 registers. Therefore,
use SICVLANR1/2 instead of PCVLANR1/2. Note that this is not an issue
in actual use, because the current driver does not support custom TPID,
the driver will not access these two registers in actual use, so this
modification is just an optimization.
In addition, since ENETC_RXBD_FLAG_TPID is defined as GENMASK(1, 0),
the possible values are only 0, 1, 2, 3, so the default branch will
never be true, so remove the default branch.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20250613093605.39277-1-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, the MANA driver allocates MSI-X vectors statically based on
MANA_MAX_NUM_QUEUES and num_online_cpus() values and in some cases ends
up allocating more vectors than it needs. This is because, by this time
we do not have a HW channel and do not know how many IRQs should be
allocated.
To avoid this, we allocate 1 MSI-X vector during the creation of HWC and
after getting the value supported by hardware, dynamically add the
remaining MSI-X vectors.
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
In order to prepare the MANA driver to allocate the MSI-X IRQs
dynamically, we need to enhance irq_setup() to allow skipping
affinitizing IRQs to the first CPU sibling group.
This would be for cases when the number of IRQs is less than or equal
to the number of online CPUs. In such cases for dynamically added IRQs
the first CPU sibling group would already be affinitized with HWC IRQ.
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Yury Norov [NVIDIA] <yury.norov@gmail.com>
Commit 91bfe210e1 ("net: mana: add a function to spread IRQs per CPUs")
added the irq_setup() function that distributes IRQs on CPUs according
to a tricky heuristic. The corresponding commit message explains the
heuristic.
Duplicate it in the source code to make available for readers without
digging git in history. Also, add more detailed explanation about how
the heuristics is implemented.
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Allow dynamic MSI-X vector allocation for pci_hyperv PCI controller
by adding support for the flag MSI_FLAG_PCI_MSIX_ALLOC_DYN and using
pci_msix_prepare_desc() to prepare the MSI-X descriptors.
Feature support added for both x86 and ARM64
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
For supporting dynamic MSI-X vector allocation by PCI controllers, enabling
the flag MSI_FLAG_PCI_MSIX_ALLOC_DYN is not enough, msix_prepare_msi_desc()
to prepare the MSI descriptor is also needed.
Export pci_msix_prepare_desc() to allow PCI controllers to support dynamic
MSI-X vector allocation.
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Migrate to new callbacks added by commit 9bb00786fc ("net: ethtool:
add dedicated callbacks for getting and setting rxfh fields").
Uniquely, this driver supports only the SET operation. It does not
support GET at all. The SET callback also always returns 0, even
tho it checks a bunch of conditions, and if my quick reading is
right, expects the user to insert filtering rules for given flow
type first? Long story short it seems too convoluted to easily
add the GET as part of the conversion.
Link: https://patch.msgid.link/20250613172751.3754732-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Heiner Kallweit says:
====================
net: phy: remove phy_driver_is_genphy and phy_driver_is_genphy_10g
Replace phy_driver_is_genphy() and phy_driver_is_genphy_10g()
with a new flag in struct phy_device.
====================
Link: https://patch.msgid.link/5778e86e-dd54-4388-b824-6132729ad481@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use new flag phydev->is_genphy_driven to simplify this function.
Note that this includes a minor functional change:
Now this function returns true if ANY of the genphy drivers
is bound to the PHY device.
We have only one user in DSA driver mt7530, and there the
functional change doesn't matter.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/c9ac3a7d-262a-425d-9153-97fe3ca6280a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
eth: intel: migrate to new RXFH callbacks
Migrate Intel drivers to the recently added dedicated .get_rxfh_fields
and .set_rxfh_fields ethtool callbacks.
Note that I'm deleting all the boilerplate kdoc from the affected
functions in the more recent drivers. If the maintainers feel strongly
I can respin and add it back, but it really feels useless and undue
burden for refactoring. No other vendor does this.
v1: https://lore.kernel.org/20250613010111.3548291-1-kuba@kernel.org
====================
Link: https://patch.msgid.link/20250614180907.4167714-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
