Add a new test where some of the packets are not passed to the AF_XDP
socket and instead get a XDP_DROP verdict. This is important as it
tests the recycling mechanism of the buffer pool. If a packet is not
sent to the AF_XDP socket, the buffer the packet resides in is instead
recycled so it can be used again without the round-trip to user
space. The test introduces a new XDP program that drops every other
packet.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-13-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Remove unnecessary code in the control path. This is located in the
file xsk.c that was moved from libbpf when the xsk support there was
deprecated. Some of the code there is not needed anymore as the
selftests are only guaranteed to run on the kernel it is shipped
with. Therefore, all the code that has to deal with compatibility of
older kernels can be dropped and also any other function that is not
of any use for the tests.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-11-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Load and attach the XDP program only once per XDP mode that is being
executed. Today, the XDP program is loaded and attached for every
test, then unloaded, which takes a long time on real NICs, since they
have to reconfigure their HW, in contrast to veth. The test suite now
completes in 21 seconds, instead of 207 seconds previously on my
machine. This is a speed-up of around 10x.
This is accomplished by moving the XDP loading from the worker threads
to the main thread and replacing the XDP loading interfaces of xsk.c
that was taken from the xsk support in libbpf, with something more
explicit that is more useful for these tests. Instead, the relevant
file descriptors and ifindexes are just passed down to the new
functions.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-10-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Replace our own homegrown assembly store/release and load/acquire
implementations with the HW agnositic atomic APIs C11 offers. This to
make the code more portable, easier to read, and reduce the
maintenance burden.
The original code used load-acquire and store-release barriers
hand-coded in assembly. Since C11, these kind of operations are
offered as built-ins in gcc and llvm. The load-acquire operation
prevents hoisting of non-atomic memory operations to before this
operation and it corresponds to the __ATOMIC_ACQUIRE operation in the
built-in atomics. The store-release operation prevents hoisting of
non-atomic memory operations to after this operation and it
corresponds to the __ATOMIC_RELEASE operation in the built-in atomics.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-8-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a new option to the test_xsk.sh script that only creates the two
veth netdevs and the extra namespace, then exits without running any
tests. The failed test can then be executed in the debugger without
having to create the netdevs and namespace manually. For ease-of-use,
the veth netdevs to use are printed so they can be copied into the
debugger.
Here is an example how to use it:
> sudo ./test_xsk.sh -d
veth10 veth11
> gdb xskxceiver
In gdb:
run -i veth10 -i veth11
And now the test cases can be debugged with gdb.
If you want to debug the test suite on a real NIC in loopback mode,
there is no need to use this feature as you already know the netdev of
your NIC.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-7-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Submit the correct number of frames in the function
xsk_populate_fill_ring(). For the tests that set the flag
use_addr_for_fill, uninitialized buffers were sent to the fill ring
following the correct ones. This has no impact on the tests, since
they only use the ones that were initialized. But for correctness,
this should be fixed.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-4-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
vsyscall detection code uses direct call to the beginning of
the vsyscall page:
asm ("call %P0" :: "i" (0xffffffffff600000))
It generates "call rel32" instruction but it is not relocated if binary
is PIE, so binary segfaults into random userspace address and vsyscall
page status is detected incorrectly.
Do more direct:
asm ("call *%rax")
which doesn't do need any relocaltions.
Mark g_vsyscall as volatile for a good measure, I didn't find instruction
setting it to 0. Now the code is obviously correct:
xor eax, eax
mov rdi, rbp
mov rsi, rbp
mov DWORD PTR [rip+0x2d15], eax # g_vsyscall = 0
mov rax, 0xffffffffff600000
call rax
mov DWORD PTR [rip+0x2d02], 1 # g_vsyscall = 1
mov eax, DWORD PTR ds:0xffffffffff600000
mov DWORD PTR [rip+0x2cf1], 2 # g_vsyscall = 2
mov edi, [rip+0x2ceb] # exit(g_vsyscall)
call exit
Note: fixed proc-empty-vm test oopses 5.19.0-28-generic kernel
but this is separate story.
Link: https://lkml.kernel.org/r/Y7h2xvzKLg36DSq8@p183
Fixes: 5bc73bb345 ("proc: test how it holds up with mapping'less process")
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The kselftest framework uses a default timeout of 45 seconds for
all test scripts.
Increase the timeout to two minutes for the netfilter tests, this
should hopefully be enough,
Make sure that, should the script be canceled, the net namespace and
the spawned ping instances are removed.
Fixes: 25d8bcedbf ("selftests: add script to stress-test nft packet path vs. control plane")
Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Florian Westphal <fw@strlen.de>
Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When a match has been made to the nth duplicate symbol, return
success not error.
Example:
Before:
$ cat file.c
cat: file.c: No such file or directory
$ cat file1.c
#include <stdio.h>
static void func(void)
{
printf("First func\n");
}
void other(void);
int main()
{
func();
other();
return 0;
}
$ cat file2.c
#include <stdio.h>
static void func(void)
{
printf("Second func\n");
}
void other(void)
{
func();
}
$ gcc -Wall -Wextra -o test file1.c file2.c
$ perf record -e intel_pt//u --filter 'filter func @ ./test' -- ./test
Multiple symbols with name 'func'
#1 0x1149 l func
which is near main
#2 0x1179 l func
which is near other
Disambiguate symbol name by inserting #n after the name e.g. func #2
Or select a global symbol by inserting #0 or #g or #G
Failed to parse address filter: 'filter func @ ./test'
Filter format is: filter|start|stop|tracestop <start symbol or address> [/ <end symbol or size>] [@<file name>]
Where multiple filters are separated by space or comma.
$ perf record -e intel_pt//u --filter 'filter func #2 @ ./test' -- ./test
Failed to parse address filter: 'filter func #2 @ ./test'
Filter format is: filter|start|stop|tracestop <start symbol or address> [/ <end symbol or size>] [@<file name>]
Where multiple filters are separated by space or comma.
After:
$ perf record -e intel_pt//u --filter 'filter func #2 @ ./test' -- ./test
First func
Second func
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.016 MB perf.data ]
$ perf script --itrace=b -Ftime,flags,ip,sym,addr --ns
1231062.526977619: tr strt 0 [unknown] => 558495708179 func
1231062.526977619: tr end call 558495708188 func => 558495708050 _init
1231062.526979286: tr strt 0 [unknown] => 55849570818d func
1231062.526979286: tr end return 55849570818f func => 55849570819d other
Fixes: 1b36c03e35 ("perf record: Add support for using symbols in address filters")
Reported-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Dmitry Dolgov <9erthalion6@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230110185659.15979-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When passing compiler variables like CC=$(HOSTCC) to a submake
we must ensure the variable is quoted in order to handle cases
where $(HOSTCC) may be multiple binaries.
For example when using ccache $HOSTCC may be:
"/usr/bin/ccache /usr/bin/gcc"
If we pass CC without quotes like CC=$(HOSTCC) only the first
"/usr/bin/ccache" part will be assigned to the CC variable which
will cause an error due to dropping the "/usr/bin/gcc" part of
the variable in the submake invocation.
This fixes errors such as:
/usr/bin/ccache: invalid option -- 'd'
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20230110014504.3120711-1-james.hilliard1@gmail.com
Test the getpagesize() function. Make sure it returns the correct
value.
Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This function returns the page size used by the running kernel. The
page size value is taken from the auxiliary vector at 'AT_PAGESZ' key.
'getpagesize(2)' is assumed as a syscall becuase the manpage placement
of this function is in entry 2 ('man 2 getpagesize') despite there is
no real 'getpagesize(2)' syscall in the Linux syscall table. Define
this function in 'sys.h'.
Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Previous commits save the address of the auxiliary vector into a global
variable @_auxv. This commit creates a new function 'getauxval()' as a
helper function to get the auxv value based on the given key.
The behavior of this function is identic with the function documented
in 'man 3 getauxval'. This function is also needed to implement
'getpagesize()' function that we will wire up in the next patches.
Signed-off-by: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In the _start block we now iterate over envp to find the auxiliary
vector after the NULL. The pointer is saved into an _auxv variable
that is marked as weak so that it's accessible from multiple units.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In the _start block we now iterate over envp to find the auxiliary
vector after the NULL. The pointer is saved into an _auxv variable
that is marked as weak so that it's accessible from multiple units.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In the _start block we now iterate over envp to find the auxiliary
vector after the NULL. The pointer is saved into an _auxv variable
that is marked as weak so that it's accessible from multiple units.
It was tested on riscv64 only.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In the _start block we now iterate over envp to find the auxiliary
vector after the NULL. The pointer is saved into an _auxv variable
that is marked as weak so that it's accessible from multiple units.
Signed-off-by: Willy Tarreau <w@1wt.eu>
It was tested in arm, thumb1 and thumb2 modes.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In the _start block we now iterate over envp to find the auxiliary
vector after the NULL. The pointer is saved into an _auxv variable
that is marked as weak so that it's accessible from multiple units.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In the _start block we now iterate over envp to find the auxiliary
vector after the NULL. The pointer is saved into an _auxv variable
that is marked as weak so that it's accessible from multiple units.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In the _start block we now iterate over envp to find the auxiliary
vector after the NULL. The pointer is saved into an _auxv variable
that is marked as weak so that it's accessible from multiple units.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The environ is retrieved from the _start code and is easy to store at
this moment. Let's declare the variable weak and store the value into
it. By not being static it will be visible to all units. By being weak,
if some programs already declared it, they will continue to be able to
use it. This was tested on s390 both with environ inherited from
_start and extracted from envp.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The environ is retrieved from the _start code and is easy to store at
this moment. Let's declare the variable weak and store the value into
it. By not being static it will be visible to all units. By being weak,
if some programs already declared it, they will continue to be able to
use it. This was tested on riscv64 both with environ inherited from
_start and extracted from envp.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The environ is retrieved from the _start code and is easy to store at
this moment. Let's declare the variable weak and store the value into
it. By not being static it will be visible to all units. By being weak,
if some programs already declared it, they will continue to be able to
use it. This was tested with mips24kc (BE) both with environ inherited
from _start and extracted from envp.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The environ is retrieved from the _start code and is easy to store at
this moment. Let's declare the variable weak and store the value into
it. By not being static it will be visible to all units. By being weak,
if some programs already declared it, they will continue to be able to
use it. This was tested in arm and thumb1 and thumb2 modes, and for each
mode, both with environ inherited from _start and extracted from envp.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The environ is retrieved from the _start code and is easy to store at
this moment. Let's declare the variable weak and store the value into
it. By not being static it will be visible to all units. By being weak,
if some programs already declared it, they will continue to be able to
use it. This was tested both with environ inherited from _start and
extracted from envp.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The environ is retrieved from the _start code and is easy to store at
this moment. Let's declare the variable weak and store the value into
it. By not being static it will be visible to all units. By being weak,
if some programs already declared it, they will continue to be able to
use it. This was tested both with environ inherited from _start and
extracted from envp.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The environ is retrieved from the _start code and is easy to store at
this moment. Let's declare the variable weak and store the value into
it. By not being static it will be visible to all units. By being weak,
if some programs already declared it, they will continue to be able to
use it. This was tested both with environ inherited from _start and
extracted from envp.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Till now errno was declared static so that it could be eliminated if
unused. While the goal is commendable for tiny executables as it allows
to eliminate any data and bss segments when not used, this comes with
some limitations, one of which being that the errno symbol seen in
different units are not the same. Even though this has never been a
real issue given the nature of the programs involved till now, it
happens that referencing the same symbol from multiple units can also
be achieved using weak symbols, with a difference being that only one
of them will be used for all of them. Compared to weak symbols, static
basically have no benefit for regular programs since there are always
at least a few variables in most of these, so the bss segment cannot
be eliminated. E.g:
$ size nolibc-test-static-errno
text data bss dec hex filename
11531 0 48 11579 2d3b nolibc-test-static-errno
Furthermore, the weak symbol doesn't use bss storage at all, resulting
in a slightly section:
$ size nolibc-test-weak-errno
text data bss dec hex filename
11531 0 40 11571 2d33 nolibc-test-weak-errno
This patch thus converts errno from static to weak.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The historic nolibc code did not include asm/fcntl.h and had to define
the various O_RDWR etc macros in each arch-specific file (since such
values differ between certain archs). This was found at least once to
induce bugs due to wrong definitions. Let's get rid of all of them and
include asm/nolibc.h from sys.h instead. This was verified to work
properly on all supported architectures.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In Thumb mode, register r7 is normally used to store the frame pointer.
By default when optimizing at -Os there's no frame pointer so this works
fine. But if no optimization is set, then build errors occur, indicating
that r7 cannot not be used. It's difficult to cheat because it's the
compiler that is complaining, not the assembler, so it's not even possible
to report that the register was clobbered. The solution consists in saving
and restoring r7 around the syscall, but this slightly inflates the code.
The syscall number is passed via r6 which is never used by syscalls.
The current patch adds a few macroes which do that only in Thumb mode,
and which continue to directly assign the syscall number to register r7
in ARM mode. Now this always builds and works for all modes (tested on
Arm, Thumbv1, Thumbv2 modes, at -Os, -O0, -O0 -fomit-frame-pointer).
The code is very slightly inflated in thumb-mode without frame-pointers
compared to previously (e.g. 7928 vs 7864 bytes for nolibc-test) but at
least it's always operational. And it's possible to disable this mechanism
by setting NOLIBC_OMIT_FRAME_POINTER.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Passing -mthumb to the kernel.org arm toolchain failed to build because it
defaults to armv5 hence thumb1, which has a fairly limited instruction set
compared to thumb2 enabled with armv7 that is much more complete. It's not
very difficult to adjust the instructions to also build on thumb1, it only
adds a total of 3 instructions, so it's worth doing it at least to ease use
by casual testers. It was verified that the adjusted code now builds and
works fine for armv5, thumb1, armv7 and thumb2, as long as frame pointers
are not used.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The out-of-block asm() statement carrying _start does not allow the
compiler to know what section the assembly code is being emitted to,
and there's no easy way to push/pop the current section and restore
it. It sometimes causes issues depending on the include files ordering
and compiler optimizations. For example if a variable is declared
immediately before the asm() block and another one after, the compiler
assumes that the current section is still .bss and doesn't re-emit it,
making the second variable appear inside the .text section instead.
Forcing .bss at the end of the _start block doesn't work either because
at certain optimizations the compiler may reorder blocks and will make
some real code appear just after this block.
A significant number of solutions were attempted, but many of them were
still sensitive to section reordering. In the end, the best way to make
sure the compiler and assembler agree on the current section is to place
this code inside a function. Here the function is directly called _start
and configured not to emit a frame-pointer, hence to have no prologue.
If some future architectures would still emit some prologue, another
working approach consists in naming the function differently and placing
the _start label inside the asm statement. But the current solution is
simpler.
It was tested with nolibc-test at -O,-O0,-O2,-O3,-Os for arm,arm64,i386,
mips,riscv,s390 and x86_64.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In 746bd29e34 ("perf build: Use tools/lib headers from install
path") we stopped having the tools/lib/ directory from the kernel
sources in the header include path unconditionally, which breaks the
build on systems with older versions of libbpf-devel, in this case 0.7.0
as some of the structures and function declarations present in the newer
version of libbpf included in the kernel sources (tools/lib/bpf) are not
anymore used, just the ones in the system libbpf.
So instead of trying to provide alternative functions when the
libbpf-bpf_program__set_insns feature test fails, fail a
LIBBPF_DYNAMIC=1 build (requesting the use of the system's libbpf) and
emit this build error message:
$ make LIBBPF_DYNAMIC=1 -C tools/perf
Makefile.config:593: *** Error: libbpf devel library needs to be >= 0.8.0 to build with LIBBPF_DYNAMIC, update or build statically with the version that comes with the kernel sources. Stop.
$
For v6.3 these tests will be revamped and we'll require libbpf 1.0 as a
minimal version for using LIBBPF_DYNAMIC=1, most distros should have it
by now or at v6.3 time.
Fixes: 746bd29e34 ("perf build: Use tools/lib headers from install path")
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/CAP-5=fVa51_URGsdDFVTzpyGmdDRj_Dj2EKPuDHNQ0BYgMSzUA@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
While doing 'make -C tools/perf build-test' one can notice error
messages while trying to install libtraceevent plugins, stop doing that
as libtraceevent isn't anymore a homie.
These are the warnings dealt with:
make_install_prefix_slash_O: make install prefix=/tmp/krava/
failed to find: /tmp/krava/etc/bash_completion.d/perf
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_cfg80211.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_scsi.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_xen.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_function.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_sched_switch.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_mac80211.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_kvm.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_kmem.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_hrtimer.so
failed to find: /tmp/krava/lib64/traceevent/plugins/plugin_jbd2.so
Fixes: 4171925aa9 ("tools lib traceevent: Remove libtraceevent")
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lore.kernel.org/lkml/Y7xXz+TSpiCbQGjw@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use 'set -e' and an exit handler to stop the script if a command fails
and ensure the test environment is cleaned up in any case. Also, handle
the case where the script is interrupted by SIGINT.
The only command that's expected to fail is 'wait $ping_pid', since
it's killed by the script. Handle this case with '|| true' to make it
play well with 'set -e'.
Finally, return the Kselftest SKIP code (4) when the script breaks
because of an environment problem or a command line failure. The 0 and
1 return codes should now reliably indicate that all tests have been
run (0: all tests run and passed, 1: all tests run but at least one
failed, 4: test script didn't run completely).
Fixes: b690842d12 ("selftests/net: test l2 tunnel TOS/TTL inheriting")
Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This selftest currently runs half in the current namespace and half in
a netns of its own. Therefore, the test can fail if the current
namespace is already configured with incompatible parameters (for
example if it already has a veth0 interface).
Adapt the script to put both ends of the veth pair in their own netns.
Now veth0 is created in NS0 instead of the current namespace, while
veth1 is set up in NS1 (instead of the 'testing' netns).
The user visible netns names are randomised to minimise the risk of
conflicts with already existing namespaces. The cleanup() function
doesn't need to remove the virtual interface anymore: deleting NS0 and
NS1 automatically removes the virtual interfaces they contained.
We can remove $ns, which was only used to run ip commands in the
'testing' netns (let's use the builtin "-netns" option instead).
However, we still need a similar functionality as ping and tcpdump
now need to run in NS0. So we now have $RUN_NS0 for that.
Fixes: b690842d12 ("selftests/net: test l2 tunnel TOS/TTL inheriting")
Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The ping command can run before DAD completes. In that case, ping may
fail and break the selftest.
We don't need DAD here since we're working on isolated device pairs.
Fixes: b690842d12 ("selftests/net: test l2 tunnel TOS/TTL inheriting")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
