Running command perf stat -vv -e cpu_cycles -C0 -- true
displays this warning:
Attempting to add event pmu 'cpum_cf' with 'cpu_cycles,'
that may result in non-fatal errors
Make the PMU cpum_cf selectable and avoid this warning.
While at it also fix this warning for PMUs pai_crypto and pai_ext.
Output before:
# ./perf stat -vv -e cpu_cycles -C0 -- true
Using CPUID IBM,3931,704,A01,3.7,002f
Attempting to add event pmu 'cpum_cf' with 'cpu_cycles,'
that may result in non-fatal errors
After aliases, add event pmu 'cpum_cf' with 'event,'
that may result in non-fatal errors
cpu_cycles -> cpum_cf/event=0/
Control descriptor is not initialized
------------------------------------------------------------
perf_event_attr:
type 10
size 128
config 0x1001
sample_type IDENTIFIER
read_format TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
disabled 1
inherit 1
exclude_guest 1
------------------------------------------------------------
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 3
cpu_cycles: 0: 290434 2479172 2479172:
cpu_cycles: 290434 2479172 2479172
Performance counter stats for 'CPU(s) 0':
290,434 cpu_cycles
0.002465617 seconds time elapsed
#
Now the warning "Attempting to add event pmu 'cpum_cf' ..."
does not show up anymore.
Output after:
# ./perf stat -vv -e cpu_cycles -C0 -- true
Using CPUID IBM,3931,704,A01,3.7,002f
After aliases, add event pmu 'cpum_cf' with 'event,'
that may result in non-fatal errors
cpu_cycles -> cpum_cf/event=0/
Control descriptor is not initialized
....
Performance counter stats for 'CPU(s) 0':
357,023 cpu_cycles
0.002454995 seconds time elapsed
#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20230316074946.41110-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
I got a report of a msan failure like below:
$ sudo perf lock con -ab -- sleep 1
...
==224416==WARNING: MemorySanitizer: use-of-uninitialized-value
#0 0x5651160d6c96 in lock_contention_read util/bpf_lock_contention.c:290:8
#1 0x565115f90870 in __cmd_contention builtin-lock.c:1919:3
#2 0x565115f90870 in cmd_lock builtin-lock.c:2385:8
#3 0x565115f03a83 in run_builtin perf.c:330:11
#4 0x565115f03756 in handle_internal_command perf.c:384:8
#5 0x565115f02d53 in run_argv perf.c:428:2
#6 0x565115f02d53 in main perf.c:562:3
#7 0x7f43553bc632 in __libc_start_main
#8 0x565115e865a9 in _start
It was because the 'key' variable is not initialized. Actually it'd be set
by bpf_map_get_next_key() but msan didn't seem to understand it. Let's make
msan happy by initializing the variable.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230324001922.937634-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This updates expected return values for invalid buffer test. Now such
values are returned from transport, not from af_vsock.c.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We need the fixes in here for testing, as well as the driver core
changes for documentation updates to build on.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In commit 22df776a9a ("tasks: Extract rcu_users out of union"), the
'refcount_t rcu_users' field was extracted out of a union with the
'struct rcu_head rcu' field. This allows us to safely perform a
refcount_inc_not_zero() on task->rcu_users when acquiring a reference on
a task struct. A prior patch leveraged this by making struct task_struct
an RCU-protected object in the verifier, and by bpf_task_acquire() to
use the task->rcu_users field for synchronization.
Now that we can use RCU to protect tasks, we no longer need
bpf_task_kptr_get(), or bpf_task_acquire_not_zero(). bpf_task_kptr_get()
is truly completely unnecessary, as we can just use RCU to get the
object. bpf_task_acquire_not_zero() is now equivalent to
bpf_task_acquire().
In addition to these changes, this patch also updates the associated
selftests to no longer use these kfuncs.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230331195733.699708-3-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
struct task_struct objects are a bit interesting in terms of how their
lifetime is protected by refcounts. task structs have two refcount
fields:
1. refcount_t usage: Protects the memory backing the task struct. When
this refcount drops to 0, the task is immediately freed, without
waiting for an RCU grace period to elapse. This is the field that
most callers in the kernel currently use to ensure that a task
remains valid while it's being referenced, and is what's currently
tracked with bpf_task_acquire() and bpf_task_release().
2. refcount_t rcu_users: A refcount field which, when it drops to 0,
schedules an RCU callback that drops a reference held on the 'usage'
field above (which is acquired when the task is first created). This
field therefore provides a form of RCU protection on the task by
ensuring that at least one 'usage' refcount will be held until an RCU
grace period has elapsed. The qualifier "a form of" is important
here, as a task can remain valid after task->rcu_users has dropped to
0 and the subsequent RCU gp has elapsed.
In terms of BPF, we want to use task->rcu_users to protect tasks that
function as referenced kptrs, and to allow tasks stored as referenced
kptrs in maps to be accessed with RCU protection.
Let's first determine whether we can safely use task->rcu_users to
protect tasks stored in maps. All of the bpf_task* kfuncs can only be
called from tracepoint, struct_ops, or BPF_PROG_TYPE_SCHED_CLS, program
types. For tracepoint and struct_ops programs, the struct task_struct
passed to a program handler will always be trusted, so it will always be
safe to call bpf_task_acquire() with any task passed to a program.
Note, however, that we must update bpf_task_acquire() to be KF_RET_NULL,
as it is possible that the task has exited by the time the program is
invoked, even if the pointer is still currently valid because the main
kernel holds a task->usage refcount. For BPF_PROG_TYPE_SCHED_CLS, tasks
should never be passed as an argument to the any program handlers, so it
should not be relevant.
The second question is whether it's safe to use RCU to access a task
that was acquired with bpf_task_acquire(), and stored in a map. Because
bpf_task_acquire() now uses task->rcu_users, it follows that if the task
is present in the map, that it must have had at least one
task->rcu_users refcount by the time the current RCU cs was started.
Therefore, it's safe to access that task until the end of the current
RCU cs.
With all that said, this patch makes struct task_struct is an
RCU-protected object. In doing so, we also change bpf_task_acquire() to
be KF_ACQUIRE | KF_RCU | KF_RET_NULL, and adjust any selftests as
necessary. A subsequent patch will remove bpf_task_kptr_get(), and
bpf_task_acquire_not_zero() respectively.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20230331195733.699708-2-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Dual-license veristat.c to dual GPL-2.0-only or BSD-2-Clause license.
This is needed to mirror it to Github to make it convenient for distro
packagers to package veristat as a separate package.
Veristat grew into a useful tool by itself, and there are already
a bunch of users relying on veristat as generic BPF loading and
verification helper tool. So making it easy to packagers by providing
Github mirror just like we do for bpftool and libbpf is the next step to
get veristat into the hands of users.
Apart from few typo fixes, I'm the sole contributor to veristat.c so
far, so no extra Acks should be needed for relicensing.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20230331222405.3468634-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The fork function in gcc is considered a built in function due to
being used by libgcov when building with gnu extensions.
Rename fork to sched_process_fork to prevent this conflict.
See details:
d1c3882392https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82457
Fixes the following error:
In file included from progs/bench_local_storage_create.c:6:
progs/bench_local_storage_create.c:43:14: error: conflicting types for
built-in function 'fork'; expected 'int(void)'
[-Werror=builtin-declaration-mismatch]
43 | int BPF_PROG(fork, struct task_struct *parent, struct
task_struct *child)
| ^~~~
Fixes: cbe9d93d58 ("selftests/bpf: Add bench for task storage creation")
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230331075848.1642814-1-james.hilliard1@gmail.com
When compiling selftests with target mount_setattr I encountered some errors with the below messages:
mount_setattr_test.c: In function ‘mount_setattr_thread’:
mount_setattr_test.c:343:16: error: variable ‘attr’ has initializer but incomplete type
343 | struct mount_attr attr = {
| ^~~~~~~~~~
These errors might be because of linux/mount.h is not included. This patch resolves that issue.
Signed-off-by: Anh Tuan Phan <tuananhlfc@gmail.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This is what I've been using to see whether the spec makes sense.
A small subset of getters (mostly the unprivileged ones) is implemented.
Some setters (channels) also work.
Setters for messages with bitmasks are not implemented.
Initially I was trying to make this tool look 1:1 like real ethtool,
but eventually gave up :-)
Sample output:
$ ./tools/net/ynl/ethtool enp0s31f6
Settings for enp0s31f6:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half
100baseT/Full 1000baseT/Full
Supported pause frame use: no
Supports auto-negotiation: yes
Supported FEC modes: Not reported
Speed: Unknown!
Duplex: Unknown! (255)
Auto-negotiation: on
Port: Twisted Pair
PHYAD: 2
Transceiver: Internal
MDI-X: Unknown (auto)
Current message level: drv probe link
Link detected: no
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of dumping the error on the stdout, make the callee and
opportunity to decide what to do with it. This is mostly for the
ethtool testing.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a selftest that configures metadata tunnel encapsulation using the TC
"tunnel_key" action: it includes a test case for setting "nofrag" flag.
Example output:
# selftests: net/forwarding: tc_tunnel_key.sh
# TEST: tunnel_key nofrag (skip_hw) [ OK ]
# INFO: Could not test offloaded functionality
ok 1 selftests: net/forwarding: tc_tunnel_key.sh
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
currently, users can skip individual test cases by means of writing
"skip": "yes"
in the scenario file. Extend this functionality, introducing 'dependsOn':
it's optional property like "skip", but the value contains a command (for
example, a probe on iproute2 to check if it supports a specific feature).
If such property is present, tdc executes that command and skips the test
when the return value is non-zero.
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This selftest was introduced recently in the commit cited below. It misses
several check_err() invocations to actually verify that the previous
command succeeded. When these are added, the first one fails, because
besides the addresses added by hand, there can be a link-local address
added by the kernel. Adjust the check to expect at least three addresses
instead of exactly three, and add the missing check_err's.
Furthermore, the explanatory comments assume that the address with no
protocol is $addr2, when in fact it is $addr3. Update the comments.
Fixes: 6a414fd77f ("selftests: rtnetlink: Add an address proto test")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/53a579bc883e1bf2fe490d58427cf22c2d1aa21f.1680102695.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Conflicts:
drivers/net/ethernet/mediatek/mtk_ppe.c
3fbe4d8c0e ("net: ethernet: mtk_eth_soc: ppe: add support for flow accounting")
924531326e ("net: ethernet: mtk_eth_soc: add missing ppe cache flush when deleting a flow")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The second argument of the bpf_kptr_xchg() helper function is
ARG_PTR_TO_BTF_ID_OR_NULL. A recent patch fixed a bug whereby the
verifier would fail with an internal error message if a program invoked
the helper with a PTR_TO_BTF_ID | PTR_MAYBE_NULL register. This testcase
adds some testcases to ensure that it fails gracefully moving forward.
Before the fix, these testcases would have failed an error resembling
the following:
; p = bpf_kfunc_call_test_acquire(&(unsigned long){0});
99: (7b) *(u64 *)(r10 -16) = r7 ; frame1: ...
100: (bf) r1 = r10 ; frame1: ...
101: (07) r1 += -16 ; frame1: ...
; p = bpf_kfunc_call_test_acquire(&(unsigned long){0});
102: (85) call bpf_kfunc_call_test_acquire#13908
; frame1: R0_w=ptr_or_null_prog_test_ref_kfunc...
; p = bpf_kptr_xchg(&v->ref_ptr, p);
103: (bf) r1 = r6 ; frame1: ...
104: (bf) r2 = r0
; frame1: R0_w=ptr_or_null_prog_test_ref_kfunc...
105: (85) call bpf_kptr_xchg#194
verifier internal error: invalid PTR_TO_BTF_ID register for type match
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230330145203.80506-2-void@manifault.com
Pull networking fixes from Jakub Kicinski:
"Including fixes from CAN and WPAN.
Still quite a few bugs from this release. This pull is a bit smaller
because major subtrees went into the previous one. Or maybe people
took spring break off?
Current release - regressions:
- phy: micrel: correct KSZ9131RNX EEE capabilities and advertisement
Current release - new code bugs:
- eth: wangxun: fix vector length of interrupt cause
- vsock/loopback: consistently protect the packet queue with
sk_buff_head.lock
- virtio/vsock: fix header length on skb merging
- wpan: ca8210: fix unsigned mac_len comparison with zero
Previous releases - regressions:
- eth: stmmac: don't reject VLANs when IFF_PROMISC is set
- eth: smsc911x: avoid PHY being resumed when interface is not up
- eth: mtk_eth_soc: fix tx throughput regression with direct 1G links
- eth: bnx2x: use the right build_skb() helper after core rework
- wwan: iosm: fix 7560 modem crash on use on unsupported channel
Previous releases - always broken:
- eth: sfc: don't overwrite offload features at NIC reset
- eth: r8169: fix RTL8168H and RTL8107E rx crc error
- can: j1939: prevent deadlock by moving j1939_sk_errqueue()
- virt: vmxnet3: use GRO callback when UPT is enabled
- virt: xen: don't do grant copy across page boundary
- phy: dp83869: fix default value for tx-/rx-internal-delay
- dsa: ksz8: fix multiple issues with ksz8_fdb_dump
- eth: mvpp2: fix classification/RSS of VLAN and fragmented packets
- eth: mtk_eth_soc: fix flow block refcounting logic
Misc:
- constify fwnode pointers in SFP handling"
* tag 'net-6.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (55 commits)
net: ethernet: mtk_eth_soc: add missing ppe cache flush when deleting a flow
net: ethernet: mtk_eth_soc: fix L2 offloading with DSA untag offload
net: ethernet: mtk_eth_soc: fix flow block refcounting logic
net: mvneta: fix potential double-frees in mvneta_txq_sw_deinit()
net: dsa: sync unicast and multicast addresses for VLAN filters too
net: dsa: mv88e6xxx: Enable IGMP snooping on user ports only
xen/netback: use same error messages for same errors
test/vsock: new skbuff appending test
virtio/vsock: WARN_ONCE() for invalid state of socket
virtio/vsock: fix header length on skb merging
bnxt_en: Add missing 200G link speed reporting
bnxt_en: Fix typo in PCI id to device description string mapping
bnxt_en: Fix reporting of test result in ethtool selftest
i40e: fix registers dump after run ethtool adapter self test
bnx2x: use the right build_skb() helper
net: ipa: compute DMA pool size properly
net: wwan: iosm: fixes 7560 modem crash
net: ethernet: mtk_eth_soc: fix tx throughput regression with direct 1G links
ice: fix invalid check for empty list in ice_sched_assoc_vsi_to_agg()
ice: add profile conflict check for AVF FDIR
...
All otherwise unspecified aarch64 ID registers should be read as zero so
we cover the whole ID register space in the get-reg-list test but we've
added comments for those that have been named. Add comments for
ID_AA64PFR2_EL1, ID_AA64SMFR0_EL1, ID_AA64ISAR2_EL1, ID_AA64MMFR3_EL1
and ID_AA64MMFR4_EL1 which have been defined since the comments were
added so someone looking for them will see that they are covered.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230210-kvm-arm64-getreg-comments-v1-1-a16c73be5ab4@kernel.org
The high bits [51:48] of a physical address should appear at [15:12] in
a 64K pte, not at [51:48] as was previously being programmed. Fix this
with new helper functions that do the conversion correctly. This also
sets us up nicely for adding LPA2 encodings in future.
Fixes: 7a6629ef74 ("kvm: selftests: add virt mem support for aarch64")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230308110948.1820163-3-ryan.roberts@arm.com
