When creating an annotation section, allocate the reloc section data at
the beginning. This simplifies the data model a bit and also saves
memory due to the removal of malloc() in elf_rebuild_reloc_section().
With allyesconfig + CONFIG_DEBUG_INFO:
- Before: peak heap memory consumption: 53.49G
- After: peak heap memory consumption: 49.02G
Link: https://lore.kernel.org/r/048e908f3ede9b66c15e44672b6dda992b1dae3e.1685464332.git.jpoimboe@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
The GElf_Rel[a] structs have more similarities than differences. It's
safe to hard-code the assumptions about their shared fields as they will
never change. Consolidate their handling where possible, getting rid of
duplicated code.
Also, at least for now we only ever create rela sections, so simplify
the relocation creation code to be rela-only.
Link: https://lore.kernel.org/r/dcabf6df400ca500ea929f1e4284f5e5ec0b27c8.1685464332.git.jpoimboe@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
- The term "reloc" is overloaded to mean both "an instance of struct
reloc" and "a reloc section". Change the latter to "rsec".
- For variable names, use "sec" for regular sections and "rsec" for rela
sections to prevent them getting mixed up.
- For struct reloc variables, use "reloc" instead of "rel" everywhere
for consistency.
Link: https://lore.kernel.org/r/8b790e403df46f445c21003e7893b8f53b99a6f3.1685464332.git.jpoimboe@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
This test covers the new Virtual PCM Test Driver, including the capturing,
playback and ioctl redefinition functionalities for both interleaved and
non-interleaved access modes. This test is also helpful as an usage example
of the 'pcmtest' driver.
We have a lot of different virtual media drivers, which can be used for
testing of the userspace applications and media subsystem middle layer.
However, all of them are aimed at testing the video functionality and
simulating the video devices. For audio devices we have only snd-dummy
module, which is good in simulating the correct behavior of an ALSA device.
I decided to write a tool, which would help to test the userspace ALSA
programs (and the PCM middle layer as well) under unusual circumstances
to figure out how they would behave. So I came up with this Virtual PCM
Test Driver.
This new Virtual PCM Test Driver has several features which can be useful
during the userspace ALSA applications testing/fuzzing, or testing/fuzzing
of the PCM middle layer. Not all of them can be implemented using the
existing virtual drivers (like dummy or loopback). Here is what can this
driver do:
- Simulate both capture and playback processes
- Generate random or pattern-based capture data
- Check the playback stream for containing the looped pattern
- Inject delays into the playback and capturing processes
- Inject errors during the PCM callbacks
Also, this driver can check the playback stream for containing the
predefined pattern, which is used in the corresponding selftest to check
the PCM middle layer data transferring functionality. Additionally, this
driver redefines the default RESET ioctl, and the selftest covers this PCM
API functionality as well.
The driver supports both interleaved and non-interleaved access modes, and
have separate pattern buffers for each channel. The driver supports up to
4 channels and up to 8 substreams.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230606193254.20791-3-ivan.orlov0322@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Mimic the dirty log test and allow the user to pin demand paging test
tasks to physical CPUs.
Put the help message into a general helper as suggested by Sean.
Signed-off-by: Peter Xu <peterx@redhat.com>
[sean: rebase, tweak arg ordering, add "print" to helper, print program name]
Link: https://lore.kernel.org/r/20230607001226.1398889-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a sample application using the C library.
My main goal is to make writing selftests easier but until
I have some of those ready I think it's useful to show off
the functionality and let people poke and tinker.
Sample outputs - dump:
$ ./netdev
Select ifc ($ifindex; or 0 = dump; or -2 ntf check): 0
lo[1] 0:
enp1s0[2] 23: basic redirect rx-sg
Notifications (watching veth pair getting added and deleted):
$ ./netdev
Select ifc ($ifindex; or 0 = dump; or -2 ntf check): -2
[53] 0: (ntf: dev-add-ntf)
[54] 0: (ntf: dev-add-ntf)
[54] 23: basic redirect rx-sg (ntf: dev-change-ntf)
[53] 23: basic redirect rx-sg (ntf: dev-change-ntf)
[53] 23: basic redirect rx-sg (ntf: dev-del-ntf)
[54] 23: basic redirect rx-sg (ntf: dev-del-ntf)
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Generate the code for netdev and fou families. They are simple
and already supported by the code gen.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add "fixed" part of the user space Netlink Spec-based library.
This will get linked with the protocol implementations to form
a full API.
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit f4e4534850 ("net/netlink: fix NETLINK_LIST_MEMBERSHIPS length report")
fixed NETLINK_LIST_MEMBERSHIPS length report which caused
selftest sockopt_sk failure. The failure log looks like
test_sockopt_sk:PASS:join_cgroup /sockopt_sk 0 nsec
run_test:PASS:skel_load 0 nsec
run_test:PASS:setsockopt_link 0 nsec
run_test:PASS:getsockopt_link 0 nsec
getsetsockopt:FAIL:Unexpected NETLINK_LIST_MEMBERSHIPS value unexpected Unexpected NETLINK_LIST_MEMBERSHIPS value: actual 8 != expected 4
run_test:PASS:getsetsockopt 0 nsec
#201 sockopt_sk:FAIL
In net/netlink/af_netlink.c, function netlink_getsockopt(), for NETLINK_LIST_MEMBERSHIPS,
nlk->ngroups equals to 36. Before Commit f4e4534850, the optlen is calculated as
ALIGN(nlk->ngroups / 8, sizeof(u32)) = 4
After that commit, the optlen is
ALIGN(BITS_TO_BYTES(nlk->ngroups), sizeof(u32)) = 8
Fix the test by setting the expected optlen to be 8.
Fixes: f4e4534850 ("net/netlink: fix NETLINK_LIST_MEMBERSHIPS length report")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230606172202.1606249-1-yhs@fb.com
Commit 97f88a3d72 ("powerpc/kprobes: Fix null pointer reference in
arch_prepare_kprobe()") fixed a recent kernel oops that was caused as
ftrace-based kprobe does not generate kprobe::ainsn::insn and it gets
set to NULL.
Add new test case kprobe_insn_boundary.tc which adds a
kprobe at every byte within $FUNCTION_FORK up to an offset of 256 bytes,
to be able to test potential issues with kprobes on
successive instructions.
The '|| continue' is added with the echo statement to ignore errors that
are caused by trying to add kprobes to non probeable lines and continue
with the test.
Link: https://lore.kernel.org/linux-trace-kernel/20230428163842.95118-2-akanksha@linux.ibm.com
Signed-off-by: Akanksha J N <akanksha@linux.ibm.com>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Add fprobe events for tracing function entry and exit instead of kprobe
events. With this change, we can continue to trace function entry/exit
even if the CONFIG_KPROBES_ON_FTRACE is not available. Since
CONFIG_KPROBES_ON_FTRACE requires the CONFIG_DYNAMIC_FTRACE_WITH_REGS,
it is not available if the architecture only supports
CONFIG_DYNAMIC_FTRACE_WITH_ARGS. And that means kprobe events can not
probe function entry/exit effectively on such architecture.
But this can be solved if the dynamic events supports fprobe events.
The fprobe event is a new dynamic events which is only for the function
(symbol) entry and exit. This event accepts non register fetch arguments
so that user can trace the function arguments and return values.
The fprobe events syntax is here;
f[:[GRP/][EVENT]] FUNCTION [FETCHARGS]
f[MAXACTIVE][:[GRP/][EVENT]] FUNCTION%return [FETCHARGS]
E.g.
# echo 'f vfs_read $arg1' >> dynamic_events
# echo 'f vfs_read%return $retval' >> dynamic_events
# cat dynamic_events
f:fprobes/vfs_read__entry vfs_read arg1=$arg1
f:fprobes/vfs_read__exit vfs_read%return arg1=$retval
# echo 1 > events/fprobes/enable
# head -n 20 trace | tail
# TASK-PID CPU# ||||| TIMESTAMP FUNCTION
# | | | ||||| | |
sh-142 [005] ...1. 448.386420: vfs_read__entry: (vfs_read+0x4/0x340) arg1=0xffff888007f7c540
sh-142 [005] ..... 448.386436: vfs_read__exit: (ksys_read+0x75/0x100 <- vfs_read) arg1=0x1
sh-142 [005] ...1. 448.386451: vfs_read__entry: (vfs_read+0x4/0x340) arg1=0xffff888007f7c540
sh-142 [005] ..... 448.386458: vfs_read__exit: (ksys_read+0x75/0x100 <- vfs_read) arg1=0x1
sh-142 [005] ...1. 448.386469: vfs_read__entry: (vfs_read+0x4/0x340) arg1=0xffff888007f7c540
sh-142 [005] ..... 448.386476: vfs_read__exit: (ksys_read+0x75/0x100 <- vfs_read) arg1=0x1
sh-142 [005] ...1. 448.602073: vfs_read__entry: (vfs_read+0x4/0x340) arg1=0xffff888007f7c540
sh-142 [005] ..... 448.602089: vfs_read__exit: (ksys_read+0x75/0x100 <- vfs_read) arg1=0x1
Link: https://lore.kernel.org/all/168507469754.913472.6112857614708350210.stgit@mhiramat.roam.corp.google.com/
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/all/202302011530.7vm4O8Ro-lkp@intel.com/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Our selftests of course rely on the kernel being built with
CONFIG_DEBUG_INFO_BTF=y, though this (nor its dependencies of
CONFIG_DEBUG_INFO=y and CONFIG_DEBUG_INFO_DWARF4=y) are not specified.
This causes the wrong kernel to be built, and selftests to similarly
fail to build.
Additionally, in the BPF selftests kconfig file,
CONFIG_NF_CONNTRACK_MARK=y is specified, so that the 'u_int32_t mark'
field will be present in the definition of struct nf_conn. While a
dependency of CONFIG_NF_CONNTRACK_MARK=y, CONFIG_NETFILTER_ADVANCED=y,
should be enabled by default, I've run into instances of
CONFIG_NF_CONNTRACK_MARK not being set because CONFIG_NETFILTER_ADVANCED
isn't set, and have to manually enable them with make menuconfig.
Let's add these missing kconfig options to the file so that the
necessary dependencies are in place to build vmlinux. Otherwise, we'll
get errors like this when we try to compile selftests and generate
vmlinux.h:
$ cd /path/to/bpf-next
$ make mrproper; make defconfig
$ cat tools/testing/selftests/config >> .config
$ make -j
...
$ cd tools/testing/selftests/bpf
$ make clean
$ make -j
...
LD [M]
tools/testing/selftests/bpf/bpf_testmod/bpf_testmod.ko
tools/testing/selftests/bpf/tools/build/bpftool/bootstrap/bpftool
btf dump file vmlinux format c >
tools/testing/selftests/bpf/tools/build/bpftool/vmlinux.h
libbpf: failed to find '.BTF' ELF section in
vmlinux
Error: failed to load BTF from bpf-next/vmlinux:
No data available
make[1]: *** [Makefile:208:
tools/testing/selftests/bpf/tools/build/bpftool/vmlinux.h]
Error 195
make[1]: *** Deleting file
'tools/testing/selftests/bpf/tools/build/bpftool/vmlinux.h'
make: *** [Makefile:261:
tools/testing/selftests/bpf/tools/sbin/bpftool]
Error 2
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230602140108.1177900-1-void@manifault.com
Building BPF selftests with custom HOSTCFLAGS yields an error:
# make HOSTCFLAGS="-O2"
[...]
HOSTCC ./tools/testing/selftests/bpf/tools/build/resolve_btfids/main.o
main.c:73:10: fatal error: linux/rbtree.h: No such file or directory
73 | #include <linux/rbtree.h>
| ^~~~~~~~~~~~~~~~
The reason is that tools/bpf/resolve_btfids/Makefile passes header
include paths by extending HOSTCFLAGS which is overridden by setting
HOSTCFLAGS in the make command (because of Makefile rules [1]).
This patch fixes the above problem by passing the include paths via
`HOSTCFLAGS_resolve_btfids` which is used by tools/build/Build.include
and can be combined with overridding HOSTCFLAGS.
[1] https://www.gnu.org/software/make/manual/html_node/Overriding.html
Fixes: 56a2df7615 ("tools/resolve_btfids: Compile resolve_btfids as host program")
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230530123352.1308488-1-vmalik@redhat.com
Andrii Nakryiko writes:
And we currently don't have an attach type for NETLINK BPF link.
Thankfully it's not too late to add it. I see that link_create() in
kernel/bpf/syscall.c just bypasses attach_type check. We shouldn't
have done that. Instead we need to add BPF_NETLINK attach type to enum
bpf_attach_type. And wire all that properly throughout the kernel and
libbpf itself.
This adds BPF_NETFILTER and uses it. This breaks uabi but this
wasn't in any non-rc release yet, so it should be fine.
v2: check link_attack prog type in link_create too
Fixes: 84601d6ee6 ("bpf: add bpf_link support for BPF_NETFILTER programs")
Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/CAEf4BzZ69YgrQW7DHCJUT_X+GqMq_ZQQPBwopaJJVGFD5=d5Vg@mail.gmail.com/
Link: https://lore.kernel.org/bpf/20230605131445.32016-1-fw@strlen.de
In a recent patch, we taught the verifier that trusted PTR_TO_BTF_ID can
never be NULL. This prevents the verifier from incorrectly failing to
load certain programs where it gets confused and thinks a reference
isn't dropped because it incorrectly assumes that a branch exists in
which a NULL PTR_TO_BTF_ID pointer is never released.
This patch adds a testcase that verifies this cannot happen.
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230602150112.1494194-2-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch fixes an incorrect assumption made in the original
bpf_refcount series [0], specifically that the BPF program calling
bpf_refcount_acquire on some node can always guarantee that the node is
alive. In that series, the patch adding failure behavior to rbtree_add
and list_push_{front, back} breaks this assumption for non-owning
references.
Consider the following program:
n = bpf_kptr_xchg(&mapval, NULL);
/* skip error checking */
bpf_spin_lock(&l);
if(bpf_rbtree_add(&t, &n->rb, less)) {
bpf_refcount_acquire(n);
/* Failed to add, do something else with the node */
}
bpf_spin_unlock(&l);
It's incorrect to assume that bpf_refcount_acquire will always succeed in this
scenario. bpf_refcount_acquire is being called in a critical section
here, but the lock being held is associated with rbtree t, which isn't
necessarily the lock associated with the tree that the node is already
in. So after bpf_rbtree_add fails to add the node and calls bpf_obj_drop
in it, the program has no ownership of the node's lifetime. Therefore
the node's refcount can be decr'd to 0 at any time after the failing
rbtree_add. If this happens before the refcount_acquire above, the node
might be free'd, and regardless refcount_acquire will be incrementing a
0 refcount.
Later patches in the series exercise this scenario, resulting in the
expected complaint from the kernel (without this patch's changes):
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 1 PID: 207 at lib/refcount.c:25 refcount_warn_saturate+0xbc/0x110
Modules linked in: bpf_testmod(O)
CPU: 1 PID: 207 Comm: test_progs Tainted: G O 6.3.0-rc7-02231-g723de1a718a2-dirty #371
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
RIP: 0010:refcount_warn_saturate+0xbc/0x110
Code: 6f 64 f6 02 01 e8 84 a3 5c ff 0f 0b eb 9d 80 3d 5e 64 f6 02 00 75 94 48 c7 c7 e0 13 d2 82 c6 05 4e 64 f6 02 01 e8 64 a3 5c ff <0f> 0b e9 7a ff ff ff 80 3d 38 64 f6 02 00 0f 85 6d ff ff ff 48 c7
RSP: 0018:ffff88810b9179b0 EFLAGS: 00010082
RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000
RDX: 0000000000000202 RSI: 0000000000000008 RDI: ffffffff857c3680
RBP: ffff88810027d3c0 R08: ffffffff8125f2a4 R09: ffff88810b9176e7
R10: ffffed1021722edc R11: 746e756f63666572 R12: ffff88810027d388
R13: ffff88810027d3c0 R14: ffffc900005fe030 R15: ffffc900005fe048
FS: 00007fee0584a700(0000) GS:ffff88811b280000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005634a96f6c58 CR3: 0000000108ce9002 CR4: 0000000000770ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
bpf_refcount_acquire_impl+0xb5/0xc0
(rest of output snipped)
The patch addresses this by changing bpf_refcount_acquire_impl to use
refcount_inc_not_zero instead of refcount_inc and marking
bpf_refcount_acquire KF_RET_NULL.
For owning references, though, we know the above scenario is not possible
and thus that bpf_refcount_acquire will always succeed. Some verifier
bookkeeping is added to track "is input owning ref?" for bpf_refcount_acquire
calls and return false from is_kfunc_ret_null for bpf_refcount_acquire on
owning refs despite it being marked KF_RET_NULL.
Existing selftests using bpf_refcount_acquire are modified where
necessary to NULL-check its return value.
[0]: https://lore.kernel.org/bpf/20230415201811.343116-1-davemarchevsky@fb.com/
Fixes: d2dcc67df9 ("bpf: Migrate bpf_rbtree_add and bpf_list_push_{front,back} to possibly fail")
Reported-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Link: https://lore.kernel.org/r/20230602022647.1571784-5-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch is linked to the previous commit ("mptcp: only send RM_ADDR in
nl_cmd_remove").
To align with what is done by the in-kernel PM, update userspace pm addr
selftests, by sending a remove_subflows command together after the
remove_addrs command.
Fixes: d9a4594eda ("mptcp: netlink: Add MPTCP_PM_CMD_REMOVE")
Fixes: 97040cf980 ("selftests: mptcp: userspace pm address tests")
Cc: stable@vger.kernel.org
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Without this we were not getting the thousands separator for big
numbers.
Noticed while developing 'perf bench uprobe', but the use of %' predates
that, for instance 'perf bench syscall' uses it.
Before:
# perf bench uprobe all
# Running uprobe/baseline benchmark...
# Executed 1000 usleep(1000) calls
Total time: 1054082243ns
1054082.243000 nsecs/op
#
After:
# perf bench uprobe all
# Running uprobe/baseline benchmark...
# Executed 1,000 usleep(1000) calls
Total time: 1,053,715,144ns
1,053,715.144000 nsecs/op
#
Fixes: c2a0820305 ("perf bench: Add basic syscall benchmark")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andre Fredette <anfredet@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Dave Tucker <datucker@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Derek Barbosa <debarbos@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/lkml/ZH3lcepZ4tBYr1jv@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When everything is configured, VLAN membership on the bridge in this
selftest are as follows:
# bridge vlan show
port vlan-id
swp2 1 PVID Egress Untagged
555
br1 1 Egress Untagged
555 PVID Egress Untagged
Note that it is possible for untagged traffic to just flow through as VLAN
1, instead of using VLAN 555 as intended by the test. This configuration
seems too close to "works by accident", and it would be better to just shut
out VLAN 1 altogether.
To that end, configure vlan_default_pvid of 0:
# bridge vlan show
port vlan-id
swp2 555
br1 555 PVID Egress Untagged
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a topology diagram to this selftest to make the configuration easier to
understand.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The topology diagram implies that $swp1 and $swp2 are members of the bridge
br0, when in fact only their uppers, $swp1.10 and $swp2.10 are. Adjust the
diagram.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The topology diagram implies that $swp1 and $swp2 are members of the bridge
br0, when in fact only their uppers, $swp1.10 and $swp2.10 are. Adjust the
diagram.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
GCC 11.3.0 issues warnings in this module about wrong sizes of format
specifiers:
pcm-test.c: In function ‘test_pcm_time’:
pcm-test.c:384:68: warning: format ‘%ld’ expects argument of type ‘long int’, but argument 5 \
has type ‘unsigned int’ [-Wformat=]
384 | snprintf(msg, sizeof(msg), "rate mismatch %ld != %ld", rate, rrate);
pcm-test.c:455:53: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has \
type ‘long int’ [-Wformat=]
455 | "expected %d, wrote %li", rate, frames);
pcm-test.c:462:53: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has \
type ‘long int’ [-Wformat=]
462 | "expected %d, wrote %li", rate, frames);
pcm-test.c:467:53: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has \
type ‘long int’ [-Wformat=]
467 | "expected %d, wrote %li", rate, frames);
Simple fix according to compiler's suggestion removed the warnings.
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230524191528.13203-1-mirsad.todorovac@alu.unizg.hr
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Address some fallout of the locking rework, this time affecting the
way the vgic is configured
- Fix an issue where the page table walker frees a subtree and then
proceeds with walking what it has just freed...
- Check that a given PA donated to the guest is actually memory (only
affecting pKVM)
- Correctly handle MTE CMOs by Set/Way
- Fix the reported address of a watchpoint forwarded to userspace
- Fix the freeing of the root of stage-2 page tables
- Stop creating spurious PMU events to perform detection of the
default PMU and use the existing PMU list instead
x86:
- Fix a memslot lookup bug in the NX recovery thread that could
theoretically let userspace bypass the NX hugepage mitigation
- Fix a s/BLOCKING/PENDING bug in SVM's vNMI support
- Account exit stats for fastpath VM-Exits that never leave the super
tight run-loop
- Fix an out-of-bounds bug in the optimized APIC map code, and add a
regression test for the race"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: selftests: Add test for race in kvm_recalculate_apic_map()
KVM: x86: Bail from kvm_recalculate_phys_map() if x2APIC ID is out-of-bounds
KVM: x86: Account fastpath-only VM-Exits in vCPU stats
KVM: SVM: vNMI pending bit is V_NMI_PENDING_MASK not V_NMI_BLOCKING_MASK
KVM: x86/mmu: Grab memslot for correct address space in NX recovery worker
KVM: arm64: Document default vPMU behavior on heterogeneous systems
KVM: arm64: Iterate arm_pmus list to probe for default PMU
KVM: arm64: Drop last page ref in kvm_pgtable_stage2_free_removed()
KVM: arm64: Populate fault info for watchpoint
KVM: arm64: Reload PTE after invoking walker callback on preorder traversal
KVM: arm64: Handle trap of tagged Set/Way CMOs
arm64: Add missing Set/Way CMO encodings
KVM: arm64: Prevent unconditional donation of unmapped regions from the host
KVM: arm64: vgic: Fix a comment
KVM: arm64: vgic: Fix locking comment
KVM: arm64: vgic: Wrap vgic_its_create() with config_lock
KVM: arm64: vgic: Fix a circular locking issue
This resolves the issue that generated binary is showing up as an untracked git file after every build on the kernel.
Signed-off-by: Weihao Gao <weihaogao@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull probes fixes from Masami Hiramatsu:
- Return NULL if the trace_probe list on trace_probe_event is empty
- selftests/ftrace: Choose testing symbol name for filtering feature
from sample data instead of fixed symbol
* tag 'probes-fixes-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
selftests/ftrace: Choose target function for filter test from samples
tracing/probe: trace_probe_primary_from_call(): checked list_first_entry
