The -C/--cpu option was maily for report but it also affected record as
it ate the option. So users needed to use "--" after perf mem record to
pass the info to the perf record properly.
Check if this option is set for record, and pass it to the actual perf
record.
Before)
$ sudo perf --debug perf-event-open mem record -C 0 2>&1 | grep -a sys_perf_event_open
...
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 4
sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0x8 = 5
sys_perf_event_open: pid -1 cpu 2 group_fd -1 flags 0x8 = 6
sys_perf_event_open: pid -1 cpu 3 group_fd -1 flags 0x8 = 7
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 8
sys_perf_event_open: pid -1 cpu 1 group_fd -1 flags 0x8 = 9
sys_perf_event_open: pid -1 cpu 2 group_fd -1 flags 0x8 = 10
sys_perf_event_open: pid -1 cpu 3 group_fd -1 flags 0x8 = 11
...
After)
$ sudo perf --debug perf-event-open mem record -C 0 2>&1 | grep -a sys_perf_event_open
...
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 4
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 5
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 6
sys_perf_event_open: pid -1 cpu 0 group_fd -1 flags 0x8 = 7
Reported-by: Ravi Bangoria <ravi.bangoria@amd.com>
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221004200211.1444521-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This test commonly fails on Arm Juno because the instruction interval
is large enough to miss generating any samples for Perf in system-wide
mode.
Fix this by lowering the interval until a comfortable number of Perf
instructions are generated. The test is still quick to run because only
a small amount of trace is gathered.
Before:
sudo ./perf test coresight -vvv
...
Recording trace with system wide mode
Looking at perf.data file for dumping branch samples:
Looking at perf.data file for reporting branch samples:
Looking at perf.data file for instruction samples:
CoreSight system wide testing: FAIL
...
After:
sudo ./perf test coresight -vvv
...
Recording trace with system wide mode
Looking at perf.data file for dumping branch samples:
Looking at perf.data file for reporting branch samples:
Looking at perf.data file for instruction samples:
CoreSight system wide testing: PASS
...
Reviewed-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: coresight@lists.linaro.org
Link: https://lore.kernel.org/r/20221005140508.1537277-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
SYS_pidfd_open may be undefined for old glibc, so using sys_pidfd_open()
helper defined in task_local_storage_helpers.h instead to fix potential
build failure.
And according to commit 7615d9e178 ("arch: wire-up pidfd_open()"), the
syscall number of pidfd_open is always 434 except for alpha architure,
so update the definition of __NR_pidfd_open accordingly.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221011071249.3471760-1-houtao@huaweicloud.com
When there are no program sections, obj->programs is left unallocated,
and find_prog_by_sec_insn()'s search lands on &obj->programs[0] == NULL,
and will cause null-pointer dereference in the following access to
prog->sec_idx.
Guard the search with obj->nr_programs similar to what's being done in
__bpf_program__iter() to prevent null-pointer access from happening.
Fixes: db2b8b0642 ("libbpf: Support CO-RE relocations for multi-prog sections")
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221012022353.7350-4-shung-hsi.yu@suse.com
This commit replace e_shnum with the elf_getshdrnum() helper to fix two
oss-fuzz-reported heap-buffer overflow in __bpf_object__open. Both
reports are incorrectly marked as fixed and while still being
reproducible in the latest libbpf.
# clusterfuzz-testcase-minimized-bpf-object-fuzzer-5747922482888704
libbpf: loading object 'fuzz-object' from buffer
libbpf: sec_cnt is 0
libbpf: elf: section(1) .data, size 0, link 538976288, flags 2020202020202020, type=2
libbpf: elf: section(2) .data, size 32, link 538976288, flags 202020202020ff20, type=1
=================================================================
==13==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x6020000000c0 at pc 0x0000005a7b46 bp 0x7ffd12214af0 sp 0x7ffd12214ae8
WRITE of size 4 at 0x6020000000c0 thread T0
SCARINESS: 46 (4-byte-write-heap-buffer-overflow-far-from-bounds)
#0 0x5a7b45 in bpf_object__elf_collect /src/libbpf/src/libbpf.c:3414:24
#1 0x5733c0 in bpf_object_open /src/libbpf/src/libbpf.c:7223:16
#2 0x5739fd in bpf_object__open_mem /src/libbpf/src/libbpf.c:7263:20
...
The issue lie in libbpf's direct use of e_shnum field in ELF header as
the section header count. Where as libelf implemented an extra logic
that, when e_shnum == 0 && e_shoff != 0, will use sh_size member of the
initial section header as the real section header count (part of ELF
spec to accommodate situation where section header counter is larger
than SHN_LORESERVE).
The above inconsistency lead to libbpf writing into a zero-entry calloc
area. So intead of using e_shnum directly, use the elf_getshdrnum()
helper provided by libelf to retrieve the section header counter into
sec_cnt.
Fixes: 0d6988e16a ("libbpf: Fix section counting logic")
Fixes: 25bbbd7a44 ("libbpf: Remove assumptions about uniqueness of .rodata/.data/.bss maps")
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=40868
Link: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=40957
Link: https://lore.kernel.org/bpf/20221012022353.7350-2-shung-hsi.yu@suse.com
test_xdp_adjust_tail_grow failed with ipv6:
test_xdp_adjust_tail_grow:FAIL:ipv6 unexpected error: -28 (errno 28)
The reason is that this test case tests ipv4 before ipv6, and when ipv4
test finished, topts.data_size_out was set to 54, which is smaller than the
ipv6 output data size 114, so ipv6 test fails with NOSPC error.
Fix it by reset topts.data_size_out to sizeof(buf) before testing ipv6.
Fixes: 04fcb5f9a1 ("selftests/bpf: Migrate from bpf_prog_test_run")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/bpf/20221011120108.782373-6-xukuohai@huaweicloud.com
ASAN reports an use-after-free in btf_dump_name_dups:
ERROR: AddressSanitizer: heap-use-after-free on address 0xffff927006db at pc 0xaaaab5dfb618 bp 0xffffdd89b890 sp 0xffffdd89b928
READ of size 2 at 0xffff927006db thread T0
#0 0xaaaab5dfb614 in __interceptor_strcmp.part.0 (test_progs+0x21b614)
#1 0xaaaab635f144 in str_equal_fn tools/lib/bpf/btf_dump.c:127
#2 0xaaaab635e3e0 in hashmap_find_entry tools/lib/bpf/hashmap.c:143
#3 0xaaaab635e72c in hashmap__find tools/lib/bpf/hashmap.c:212
#4 0xaaaab6362258 in btf_dump_name_dups tools/lib/bpf/btf_dump.c:1525
#5 0xaaaab636240c in btf_dump_resolve_name tools/lib/bpf/btf_dump.c:1552
#6 0xaaaab6362598 in btf_dump_type_name tools/lib/bpf/btf_dump.c:1567
#7 0xaaaab6360b48 in btf_dump_emit_struct_def tools/lib/bpf/btf_dump.c:912
#8 0xaaaab6360630 in btf_dump_emit_type tools/lib/bpf/btf_dump.c:798
#9 0xaaaab635f720 in btf_dump__dump_type tools/lib/bpf/btf_dump.c:282
#10 0xaaaab608523c in test_btf_dump_incremental tools/testing/selftests/bpf/prog_tests/btf_dump.c:236
#11 0xaaaab6097530 in test_btf_dump tools/testing/selftests/bpf/prog_tests/btf_dump.c:875
#12 0xaaaab6314ed0 in run_one_test tools/testing/selftests/bpf/test_progs.c:1062
#13 0xaaaab631a0a8 in main tools/testing/selftests/bpf/test_progs.c:1697
#14 0xffff9676d214 in __libc_start_main ../csu/libc-start.c:308
#15 0xaaaab5d65990 (test_progs+0x185990)
0xffff927006db is located 11 bytes inside of 16-byte region [0xffff927006d0,0xffff927006e0)
freed by thread T0 here:
#0 0xaaaab5e2c7c4 in realloc (test_progs+0x24c7c4)
#1 0xaaaab634f4a0 in libbpf_reallocarray tools/lib/bpf/libbpf_internal.h:191
#2 0xaaaab634f840 in libbpf_add_mem tools/lib/bpf/btf.c:163
#3 0xaaaab636643c in strset_add_str_mem tools/lib/bpf/strset.c:106
#4 0xaaaab6366560 in strset__add_str tools/lib/bpf/strset.c:157
#5 0xaaaab6352d70 in btf__add_str tools/lib/bpf/btf.c:1519
#6 0xaaaab6353e10 in btf__add_field tools/lib/bpf/btf.c:2032
#7 0xaaaab6084fcc in test_btf_dump_incremental tools/testing/selftests/bpf/prog_tests/btf_dump.c:232
#8 0xaaaab6097530 in test_btf_dump tools/testing/selftests/bpf/prog_tests/btf_dump.c:875
#9 0xaaaab6314ed0 in run_one_test tools/testing/selftests/bpf/test_progs.c:1062
#10 0xaaaab631a0a8 in main tools/testing/selftests/bpf/test_progs.c:1697
#11 0xffff9676d214 in __libc_start_main ../csu/libc-start.c:308
#12 0xaaaab5d65990 (test_progs+0x185990)
previously allocated by thread T0 here:
#0 0xaaaab5e2c7c4 in realloc (test_progs+0x24c7c4)
#1 0xaaaab634f4a0 in libbpf_reallocarray tools/lib/bpf/libbpf_internal.h:191
#2 0xaaaab634f840 in libbpf_add_mem tools/lib/bpf/btf.c:163
#3 0xaaaab636643c in strset_add_str_mem tools/lib/bpf/strset.c:106
#4 0xaaaab6366560 in strset__add_str tools/lib/bpf/strset.c:157
#5 0xaaaab6352d70 in btf__add_str tools/lib/bpf/btf.c:1519
#6 0xaaaab6353ff0 in btf_add_enum_common tools/lib/bpf/btf.c:2070
#7 0xaaaab6354080 in btf__add_enum tools/lib/bpf/btf.c:2102
#8 0xaaaab6082f50 in test_btf_dump_incremental tools/testing/selftests/bpf/prog_tests/btf_dump.c:162
#9 0xaaaab6097530 in test_btf_dump tools/testing/selftests/bpf/prog_tests/btf_dump.c:875
#10 0xaaaab6314ed0 in run_one_test tools/testing/selftests/bpf/test_progs.c:1062
#11 0xaaaab631a0a8 in main tools/testing/selftests/bpf/test_progs.c:1697
#12 0xffff9676d214 in __libc_start_main ../csu/libc-start.c:308
#13 0xaaaab5d65990 (test_progs+0x185990)
The reason is that the key stored in hash table name_map is a string
address, and the string memory is allocated by realloc() function, when
the memory is resized by realloc() later, the old memory may be freed,
so the address stored in name_map references to a freed memory, causing
use-after-free.
Fix it by storing duplicated string address in name_map.
Fixes: 919d2b1dbb ("libbpf: Allow modification of BTF and add btf__add_str API")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/bpf/20221011120108.782373-2-xukuohai@huaweicloud.com
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, and wifi.
Current release - regressions:
- Revert "net/sched: taprio: make qdisc_leaf() see the
per-netdev-queue pfifo child qdiscs", it may cause crashes when the
qdisc is reconfigured
- inet: ping: fix splat due to packet allocation refactoring in inet
- tcp: clean up kernel listener's reqsk in inet_twsk_purge(), fix UAF
due to races when per-netns hash table is used
Current release - new code bugs:
- eth: adin1110: check in netdev_event that netdev belongs to driver
- fixes for PTR_ERR() vs NULL bugs in driver code, from Dan and co.
Previous releases - regressions:
- ipv4: handle attempt to delete multipath route when fib_info
contains an nh reference, avoid oob access
- wifi: fix handful of bugs in the new Multi-BSSID code
- wifi: mt76: fix rate reporting / throughput regression on mt7915
and newer, fix checksum offload
- wifi: iwlwifi: mvm: fix double list_add at
iwl_mvm_mac_wake_tx_queue (other cases)
- wifi: mac80211: do not drop packets smaller than the LLC-SNAP
header on fast-rx
Previous releases - always broken:
- ieee802154: don't warn zero-sized raw_sendmsg()
- ipv6: ping: fix wrong checksum for large frames
- mctp: prevent double key removal and unref
- tcp/udp: fix memory leaks and races around IPV6_ADDRFORM
- hv_netvsc: fix race between VF offering and VF association message
Misc:
- remove -Warray-bounds silencing in the drivers, compilers fixed"
* tag 'net-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits)
sunhme: fix an IS_ERR() vs NULL check in probe
net: marvell: prestera: fix a couple NULL vs IS_ERR() checks
kcm: avoid potential race in kcm_tx_work
tcp: Clean up kernel listener's reqsk in inet_twsk_purge()
net: phy: micrel: Fixes FIELD_GET assertion
openvswitch: add nf_ct_is_confirmed check before assigning the helper
tcp: Fix data races around icsk->icsk_af_ops.
ipv6: Fix data races around sk->sk_prot.
tcp/udp: Call inet6_destroy_sock() in IPv6 sk->sk_destruct().
udp: Call inet6_destroy_sock() in setsockopt(IPV6_ADDRFORM).
tcp/udp: Fix memory leak in ipv6_renew_options().
mctp: prevent double key removal and unref
selftests: netfilter: Fix nft_fib.sh for all.rp_filter=1
netfilter: rpfilter/fib: Populate flowic_l3mdev field
selftests: netfilter: Test reverse path filtering
net/mlx5: Make ASO poll CQ usable in atomic context
tcp: cdg: allow tcp_cdg_release() to be called multiple times
inet: ping: fix recent breakage
ipv6: ping: fix wrong checksum for large frames
net: ethernet: ti: am65-cpsw: set correct devlink flavour for unused ports
...
In commit 1bfe26fb08 ("bpf: Add verifier support for custom callback
return range"), the verifier was updated to require callbacks to BPF
helpers to explicitly specify the range of values that can be returned.
bpf_user_ringbuf_drain() was merged after this in commit 2057156738
("bpf: Add bpf_user_ringbuf_drain() helper"), and this change in default
behavior was missed. This patch updates the BPF_MAP_TYPE_USER_RINGBUF
selftests to also return 1 from a bpf_user_ringbuf_drain() callback so
as to properly test this going forward.
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221012232015.1510043-3-void@manifault.com
The recent vm image in CI has reported error in selftests that use
the iptables command. Manu Bretelle has pointed out the difference
in the recent vm image that the iptables is sym-linked to the iptables-nft.
With this knowledge, I can also reproduce the CI error by manually running
with the 'iptables-nft'.
This patch is to replace the iptables command with iptables-legacy
to unblock the CI tests.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20221012221235.3529719-1-martin.lau@linux.dev
It's required by vm_userspace_mem_region_add() that memory size
should be aligned to host page size. However, one guest page is
provided by memslot_modification_stress_test. It triggers failure
in the scenario of 64KB-page-size-host and 4KB-page-size-guest,
as the following messages indicate.
# ./memslot_modification_stress_test
Testing guest mode: PA-bits:40, VA-bits:48, 4K pages
guest physical test memory: [0xffbfff0000, 0xffffff0000)
Finished creating vCPUs
Started all vCPUs
==== Test Assertion Failure ====
lib/kvm_util.c:824: vm_adjust_num_guest_pages(vm->mode, npages) == npages
pid=5712 tid=5712 errno=0 - Success
1 0x0000000000404eeb: vm_userspace_mem_region_add at kvm_util.c:822
2 0x0000000000401a5b: add_remove_memslot at memslot_modification_stress_test.c:82
3 (inlined by) run_test at memslot_modification_stress_test.c:110
4 0x0000000000402417: for_each_guest_mode at guest_modes.c:100
5 0x00000000004016a7: main at memslot_modification_stress_test.c:187
6 0x0000ffffb8cd4383: ?? ??:0
7 0x0000000000401827: _start at :?
Number of guest pages is not compatible with the host. Try npages=16
Fix the issue by providing 16 guest pages to the memory slot for this
particular combination of 64KB-page-size-host and 4KB-page-size-guest
on aarch64.
Fixes: ef4c9f4f65 ("KVM: selftests: Fix 32-bit truncation of vm_get_max_gfn()")
Signed-off-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221013063020.201856-1-gshan@redhat.com
Pull more KUnit updates from Shuah Khan:
"Features and fixes:
- simplify resource use
- make kunit_malloc() and kunit_free() allocations and frees
consistent. kunit_free() frees only the memory allocated by
kunit_malloc()
- stop downloading risc-v opensbi binaries using wget
- other fixes and improvements to tool and KUnit framework"
* tag 'linux-kselftest-kunit-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
Documentation: kunit: Update description of --alltests option
kunit: declare kunit_assert structs as const
kunit: rename base KUNIT_ASSERTION macro to _KUNIT_FAILED
kunit: remove format func from struct kunit_assert, get it to 0 bytes
kunit: tool: Don't download risc-v opensbi firmware with wget
kunit: make kunit_kfree(NULL) a no-op to match kfree()
kunit: make kunit_kfree() not segfault on invalid inputs
kunit: make kunit_kfree() only work on pointers from kunit_malloc() and friends
kunit: drop test pointer in string_stream_fragment
kunit: string-stream: Simplify resource use
Pull more Kselftest updates from Shuah Khan:
"This consists of fixes and improvements to memory-hotplug test and a
minor spelling fix to ftrace test"
* tag 'linux-kselftest-next-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
docs: notifier-error-inject: Correct test's name
selftests/memory-hotplug: Adjust log info for maintainability
selftests/memory-hotplug: Restore memory before exit
selftests/memory-hotplug: Add checking after online or offline
selftests/ftrace: func_event_triggers: fix typo in user message
Pull non-MM updates from Andrew Morton:
- hfs and hfsplus kmap API modernization (Fabio Francesco)
- make crash-kexec work properly when invoked from an NMI-time panic
(Valentin Schneider)
- ntfs bugfixes (Hawkins Jiawei)
- improve IPC msg scalability by replacing atomic_t's with percpu
counters (Jiebin Sun)
- nilfs2 cleanups (Minghao Chi)
- lots of other single patches all over the tree!
* tag 'mm-nonmm-stable-2022-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (71 commits)
include/linux/entry-common.h: remove has_signal comment of arch_do_signal_or_restart() prototype
proc: test how it holds up with mapping'less process
mailmap: update Frank Rowand email address
ia64: mca: use strscpy() is more robust and safer
init/Kconfig: fix unmet direct dependencies
ia64: update config files
nilfs2: replace WARN_ONs by nilfs_error for checkpoint acquisition failure
fork: remove duplicate included header files
init/main.c: remove unnecessary (void*) conversions
proc: mark more files as permanent
nilfs2: remove the unneeded result variable
nilfs2: delete unnecessary checks before brelse()
checkpatch: warn for non-standard fixes tag style
usr/gen_init_cpio.c: remove unnecessary -1 values from int file
ipc/msg: mitigate the lock contention with percpu counter
percpu: add percpu_counter_add_local and percpu_counter_sub_local
fs/ocfs2: fix repeated words in comments
relay: use kvcalloc to alloc page array in relay_alloc_page_array
proc: make config PROC_CHILDREN depend on PROC_FS
fs: uninline inode_maybe_inc_iversion()
...
If net.ipv4.conf.all.rp_filter is set, it overrides the per-interface
setting and thus defeats the fix from bbe4c0896d ("selftests:
netfilter: disable rp_filter on router"). Unset it as well to cover that
case.
Fixes: bbe4c0896d ("selftests: netfilter: disable rp_filter on router")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
Test reverse path (filter) matches in iptables, ip6tables and nftables.
Both with a regular interface and a VRF.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
The DENYLIST and DENYLIST.s390x files are used to specify testcases
which should not be run on CI. Currently, testcases are appended to the
end of these files as needed. This can make it a pain to resolve merge
conflicts. This patch alphabetizes the DENYLIST files to ease this
burden.
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Daniel Müller <deso@posteo.net>
Link: https://lore.kernel.org/r/20221011165255.774014-1-void@manifault.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Pull memblock updates from Mike Rapoport:
"Test suite improvements:
- Added verification that memblock allocations zero the allocated
memory
- Added more test cases for memblock_add(), memblock_remove(),
memblock_reserve() and memblock_free()
- Added tests for memblock_*_raw() family
- Added tests for NUMA-aware allocations in memblock_alloc_try_nid()
and memblock_alloc_try_nid_raw()"
* tag 'memblock-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock tests: add generic NUMA tests for memblock_alloc_try_nid*
memblock tests: add bottom-up NUMA tests for memblock_alloc_try_nid*
memblock tests: add top-down NUMA tests for memblock_alloc_try_nid*
memblock tests: add simulation of physical memory with multiple NUMA nodes
memblock_tests: move variable declarations to single block
memblock tests: remove 'cleared' from comment blocks
memblock tests: add tests for memblock_trim_memory
memblock tests: add tests for memblock_*bottom_up functions
memblock tests: update alloc_nid_api to test memblock_alloc_try_nid_raw
memblock tests: update alloc_api to test memblock_alloc_raw
memblock tests: add additional tests for basic api and memblock_alloc
memblock tests: add labels to verbose output for generic alloc tests
memblock tests: update zeroed memory check for memblock_alloc_* tests
memblock tests: update tests to check if memblock_alloc zeroed memory
memblock tests: update reference to obsolete build option in comments
memblock tests: add command line help option
Pull more kvm updates from Paolo Bonzini:
"The main batch of ARM + RISC-V changes, and a few fixes and cleanups
for x86 (PMU virtualization and selftests).
ARM:
- Fixes for single-stepping in the presence of an async exception as
well as the preservation of PSTATE.SS
- Better handling of AArch32 ID registers on AArch64-only systems
- Fixes for the dirty-ring API, allowing it to work on architectures
with relaxed memory ordering
- Advertise the new kvmarm mailing list
- Various minor cleanups and spelling fixes
RISC-V:
- Improved instruction encoding infrastructure for instructions not
yet supported by binutils
- Svinval support for both KVM Host and KVM Guest
- Zihintpause support for KVM Guest
- Zicbom support for KVM Guest
- Record number of signal exits as a VCPU stat
- Use generic guest entry infrastructure
x86:
- Misc PMU fixes and cleanups.
- selftests: fixes for Hyper-V hypercall
- selftests: fix nx_huge_pages_test on TDP-disabled hosts
- selftests: cleanups for fix_hypercall_test"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (57 commits)
riscv: select HAVE_POSIX_CPU_TIMERS_TASK_WORK
RISC-V: KVM: Use generic guest entry infrastructure
RISC-V: KVM: Record number of signal exits as a vCPU stat
RISC-V: KVM: add __init annotation to riscv_kvm_init()
RISC-V: KVM: Expose Zicbom to the guest
RISC-V: KVM: Provide UAPI for Zicbom block size
RISC-V: KVM: Make ISA ext mappings explicit
RISC-V: KVM: Allow Guest use Zihintpause extension
RISC-V: KVM: Allow Guest use Svinval extension
RISC-V: KVM: Use Svinval for local TLB maintenance when available
RISC-V: Probe Svinval extension form ISA string
RISC-V: KVM: Change the SBI specification version to v1.0
riscv: KVM: Apply insn-def to hlv encodings
riscv: KVM: Apply insn-def to hfence encodings
riscv: Introduce support for defining instructions
riscv: Add X register names to gpr-nums
KVM: arm64: Advertise new kvmarm mailing list
kvm: vmx: keep constant definition format consistent
kvm: mmu: fix typos in struct kvm_arch
KVM: selftests: Fix nx_huge_pages_test on TDP-disabled hosts
...
Create process without mappings and check
/proc/*/maps
/proc/*/numa_maps
/proc/*/smaps
/proc/*/smaps_rollup
They must be empty (excluding vsyscall page) or full of zeroes.
Retroactively this test should've caught embarassing /proc/*/smaps_rollup
oops:
[17752.703567] BUG: kernel NULL pointer dereference, address: 0000000000000000
[17752.703580] #PF: supervisor read access in kernel mode
[17752.703583] #PF: error_code(0x0000) - not-present page
[17752.703587] PGD 0 P4D 0
[17752.703593] Oops: 0000 [#1] PREEMPT SMP PTI
[17752.703598] CPU: 0 PID: 60649 Comm: cat Tainted: G W 5.19.9-100.fc35.x86_64 #1
[17752.703603] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./X99 Extreme6/3.1, BIOS P3.30 08/05/2016
[17752.703607] RIP: 0010:show_smaps_rollup+0x159/0x2e0
Note 1:
ProtectionKey field in /proc/*/smaps is optional,
so check most of its contents, not everything.
Note 2:
due to the nature of this test, child process hardly can signal
its readiness (after unmapping everything!) to parent.
I feel like "sleep(1)" is justified.
If you know how to do it without sleep please tell me.
Note 3:
/proc/*/statm is not tested but can be.
Link: https://lkml.kernel.org/r/Yz3liL6Dn+n2SD8Q@localhost.localdomain
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull perf tools updates from Arnaldo Carvalho de Melo:
- Add support for AMD on 'perf mem' and 'perf c2c', the kernel
enablement patches went via tip.
Example:
$ sudo perf mem record -- -c 10000
^C[ perf record: Woken up 227 times to write data ]
[ perf record: Captured and wrote 58.760 MB perf.data (836978 samples) ]
$ sudo perf mem report -F mem,sample,snoop
Samples: 836K of event 'ibs_op//', Event count (approx.): 8418762
Memory access Samples Snoop
N/A 700620 N/A
L1 hit 126675 N/A
L2 hit 424 N/A
L3 hit 664 HitM
L3 hit 10 N/A
Local RAM hit 2 N/A
Remote RAM (1 hop) hit 8558 N/A
Remote Cache (1 hop) hit 3 N/A
Remote Cache (1 hop) hit 2 HitM
Remote Cache (2 hops) hit 10 HitM
Remote Cache (2 hops) hit 6 N/A
Uncached hit 4 N/A
$
- "perf lock" improvements:
- Add -E/--entries option to limit the number of entries to
display, say to ask for just the top 5 contended locks.
- Add -q/--quiet option to suppress header and debug messages.
- Add a 'perf test' kernel lock contention entry to test 'perf
lock'.
- "perf lock contention" improvements:
- Ask BPF's bpf_get_stackid() to skip some callchain entries.
The ones closer to the tooling are bpf related and not that
interesting, the ones calling the locking function are the ones
we're interested in, example of a full, unskipped callstack:
- Allow changing the callstack depth and number of entries to skip.
1 10.74 us 10.74 us 10.74 us spinlock __bpf_trace_contention_begin+0xb
0xffffffffc03b5c47 bpf_prog_bf07ae9e2cbd02c5_contention_begin+0x117
0xffffffffc03b5c47 bpf_prog_bf07ae9e2cbd02c5_contention_begin+0x117
0xffffffffbb8b8e75 bpf_trace_run2+0x35
0xffffffffbb7eab9b __bpf_trace_contention_begin+0xb
0xffffffffbb7ebe75 queued_spin_lock_slowpath+0x1f5
0xffffffffbc1c26ff _raw_spin_lock+0x1f
0xffffffffbb841015 tick_do_update_jiffies64+0x25
0xffffffffbb8409ee tick_irq_enter+0x9e
- Show full callstack in verbose mode (-v option), sometimes this
is desirable instead of showing just one callstack entry.
- Allow multiple time ranges in 'perf record --delay' to help in
reducing the amount of data collected from hardware tracing (Intel
PT, etc) when there is a rough idea of periods of time where events
of interest take time.
- Add Intel PT to record only decoder debug messages when error
happens.
- Improve layout of Intel PT man page.
- Add new branch types: alignment, data and inst faults and arch
specific ones, such as fiq, debug_halt, debug_exit, debug_inst and
debug_data on arm64.
Kernel enablement went thru the tip tree.
- Fix 'perf probe' error log check in 'perf test' when no debuginfo is
available.
- Fix 'perf stat' aggregation mode logic, it should be looking at the
CPU not at the core number.
- Fix flags parsing in 'perf trace' filters.
- Introduce compact encoding of CPU range encoding on perf.data, to
avoid having a bitmap with all the CPUs.
- Improvements to the 'perf stat' metrics, including adding
"core_wide", and computing "smt" from the CPU topology.
- Add support to the new PERF_FORMAT_LOST perf_event_attr.read_format,
that allows tooling to ask for the precise number of lost samples for
a given event.
- Add 'addr' sort key to see just the address of sampled instructions:
$ perf record -o- true | perf report -i- -s addr
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
# Samples: 12 of event 'cycles:u'
# Event count (approx.): 252512
#
# Overhead Address
# ........ ..................
42.96% 0x7f96f08443d7
29.55% 0x7f96f0859b50
14.76% 0x7f96f0852e02
8.30% 0x7f96f0855028
4.43% 0xffffffff8de01087
perf annotate: Toggle full address <-> offset display
- Add 'f' hotkey to the 'perf annotate' TUI interface when in
'disassembler output' mode ('o' hotkey) to toggle showing full
virtual address or just the offset.
- Cache DSO build-ids when synthesizing PERF_RECORD_MMAP records for
pre-existing threads, at the start of a 'perf record' session,
speeding up that record startup phase.
- Add a command line option to specify build ids in 'perf inject'.
- Update JSON event files for the Intel alderlake, broadwell,
broadwellde, broadwellx, cascadelakex, haswell, haswellx, icelake,
icelakex, ivybridge, ivytown, jaketown, sandybridge, sapphirerapids,
skylake, skylakex, and tigerlake processors.
- Update vendor JSON event files for the ARM Neoverse V1 and E1
platforms.
- Add a 'perf test' entry for 'perf mem' where a struct has false
sharing and this gets detected in the 'perf mem' output, tested with
Intel, AMD and ARM64 systems.
- Add a 'perf test' entry to test the resolution of java symbols, where
an output like this is expected:
8.18% jshell jitted-50116-29.so [.] Interpreter
0.75% Thread-1 jitted-83602-1670.so [.] jdk.internal.jimage.BasicImageReader.getString(int)
- Add tests for the ARM64 CoreSight hardware tracing feature, with
specially crafted pureloop, memcpy, thread loop and unroll tread that
then gets traced and the output compared with expected output.
Documentation explaining it is also included.
- Add per thread Intel PT 'perf test' entry to check that
PERF_RECORD_TEXT_POKE events are recorded per CPU, resulting in a
mixture of per thread and per CPU events and mmaps, verify that this
gets all recorded correctly.
- Introduce pthread mutex wrappers to allow for building with clang's
-Wthread-safety, i.e. using the "guarded_by" "pt_guarded_by"
"lockable", "exclusive_lock_function", "exclusive_trylock_function",
"exclusive_locks_required", and "no_thread_safety_analysis" compiler
function attributes.
- Fix empty version number when building outside of a git repo.
- Improve feature detection display when multiple versions of a feature
are present, such as for binutils libbfd, that has a mix of possible
ways to detect according to the Linux distribution.
Previously in some cases we had:
Auto-detecting system features
<SNIP>
... libbfd: [ on ]
... libbfd-liberty: [ on ]
... libbfd-liberty-z: [ on ]
<SNIP>
Now for this case we show just the main feature:
Auto-detecting system features
<SNIP>
... libbfd: [ on ]
<SNIP>
- Remove some unused structs, variables, macros, function prototypes
and includes from various places.
* tag 'perf-tools-for-v6.1-1-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (169 commits)
perf script: Add missing fields in usage hint
perf mem: Print "LFB/MAB" for PERF_MEM_LVLNUM_LFB
perf mem/c2c: Avoid printing empty lines for unsupported events
perf mem/c2c: Add load store event mappings for AMD
perf mem/c2c: Set PERF_SAMPLE_WEIGHT for LOAD_STORE events
perf mem: Add support for printing PERF_MEM_LVLNUM_{CXL|IO}
perf amd ibs: Sync arch/x86/include/asm/amd-ibs.h header with the kernel
tools headers UAPI: Sync include/uapi/linux/perf_event.h header with the kernel
perf stat: Fix cpu check to use id.cpu.cpu in aggr_printout()
perf test coresight: Add relevant documentation about ARM64 CoreSight testing
perf test: Add git ignore for tmp and output files of ARM CoreSight tests
perf test coresight: Add unroll thread test shell script
perf test coresight: Add unroll thread test tool
perf test coresight: Add thread loop test shell scripts
perf test coresight: Add thread loop test tool
perf test coresight: Add memcpy thread test shell script
perf test coresight: Add memcpy thread test tool
perf test: Add git ignore for perf data generated by the ARM CoreSight tests
perf test: Add arm64 asm pureloop test shell script
perf test: Add asm pureloop test tool
...
The recent change in the cgroup will break the backward compatiblity in
the BPF program. It should support both old and new kernels using BPF
CO-RE technique.
Like the task_struct->__state handling in the offcpu analysis, we can
check the field name in the cgroup struct.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull MM updates from Andrew Morton:
- Yu Zhao's Multi-Gen LRU patches are here. They've been under test in
linux-next for a couple of months without, to my knowledge, any
negative reports (or any positive ones, come to that).
- Also the Maple Tree from Liam Howlett. An overlapping range-based
tree for vmas. It it apparently slightly more efficient in its own
right, but is mainly targeted at enabling work to reduce mmap_lock
contention.
Liam has identified a number of other tree users in the kernel which
could be beneficially onverted to mapletrees.
Yu Zhao has identified a hard-to-hit but "easy to fix" lockdep splat
at [1]. This has yet to be addressed due to Liam's unfortunately
timed vacation. He is now back and we'll get this fixed up.
- Dmitry Vyukov introduces KMSAN: the Kernel Memory Sanitizer. It uses
clang-generated instrumentation to detect used-unintialized bugs down
to the single bit level.
KMSAN keeps finding bugs. New ones, as well as the legacy ones.
- Yang Shi adds a userspace mechanism (madvise) to induce a collapse of
memory into THPs.
- Zach O'Keefe has expanded Yang Shi's madvise(MADV_COLLAPSE) to
support file/shmem-backed pages.
- userfaultfd updates from Axel Rasmussen
- zsmalloc cleanups from Alexey Romanov
- cleanups from Miaohe Lin: vmscan, hugetlb_cgroup, hugetlb and
memory-failure
- Huang Ying adds enhancements to NUMA balancing memory tiering mode's
page promotion, with a new way of detecting hot pages.
- memcg updates from Shakeel Butt: charging optimizations and reduced
memory consumption.
- memcg cleanups from Kairui Song.
- memcg fixes and cleanups from Johannes Weiner.
- Vishal Moola provides more folio conversions
- Zhang Yi removed ll_rw_block() :(
- migration enhancements from Peter Xu
- migration error-path bugfixes from Huang Ying
- Aneesh Kumar added ability for a device driver to alter the memory
tiering promotion paths. For optimizations by PMEM drivers, DRM
drivers, etc.
- vma merging improvements from Jakub Matěn.
- NUMA hinting cleanups from David Hildenbrand.
- xu xin added aditional userspace visibility into KSM merging
activity.
- THP & KSM code consolidation from Qi Zheng.
- more folio work from Matthew Wilcox.
- KASAN updates from Andrey Konovalov.
- DAMON cleanups from Kaixu Xia.
- DAMON work from SeongJae Park: fixes, cleanups.
- hugetlb sysfs cleanups from Muchun Song.
- Mike Kravetz fixes locking issues in hugetlbfs and in hugetlb core.
Link: https://lkml.kernel.org/r/CAOUHufZabH85CeUN-MEMgL8gJGzJEWUrkiM58JkTbBhh-jew0Q@mail.gmail.com [1]
* tag 'mm-stable-2022-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (555 commits)
hugetlb: allocate vma lock for all sharable vmas
hugetlb: take hugetlb vma_lock when clearing vma_lock->vma pointer
hugetlb: fix vma lock handling during split vma and range unmapping
mglru: mm/vmscan.c: fix imprecise comments
mm/mglru: don't sync disk for each aging cycle
mm: memcontrol: drop dead CONFIG_MEMCG_SWAP config symbol
mm: memcontrol: use do_memsw_account() in a few more places
mm: memcontrol: deprecate swapaccounting=0 mode
mm: memcontrol: don't allocate cgroup swap arrays when memcg is disabled
mm/secretmem: remove reduntant return value
mm/hugetlb: add available_huge_pages() func
mm: remove unused inline functions from include/linux/mm_inline.h
selftests/vm: add selftest for MADV_COLLAPSE of uffd-minor memory
selftests/vm: add file/shmem MADV_COLLAPSE selftest for cleared pmd
selftests/vm: add thp collapse shmem testing
selftests/vm: add thp collapse file and tmpfs testing
selftests/vm: modularize thp collapse memory operations
selftests/vm: dedup THP helpers
mm/khugepaged: add tracepoint to hpage_collapse_scan_file()
mm/madvise: add file and shmem support to MADV_COLLAPSE
...
Introduce the data_input map, write-protected with a small eBPF program
implementing the lsm/bpf_map hook.
Then, ensure that bpf_map_get_fd_by_id() and bpf_map_get_fd_by_id_opts()
with NULL opts don't succeed due to requesting read-write access to the
write-protected map. Also, ensure that bpf_map_get_fd_by_id_opts() with
open_flags in opts set to BPF_F_RDONLY instead succeeds.
After obtaining a read-only fd, ensure that only map lookup succeeds and
not update. Ensure that update works only with the read-write fd obtained
at program loading time, when the write protection was not yet enabled.
Finally, ensure that the other _opts variants of bpf_*_get_fd_by_id() don't
work if the BPF_F_RDONLY flag is set in opts (due to the kernel not
handling the open_flags member of bpf_attr).
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221006110736.84253-7-roberto.sassu@huaweicloud.com
Introduce bpf_link_get_fd_by_id_opts(), for symmetry with
bpf_map_get_fd_by_id_opts(), to let the caller pass the newly introduced
data structure bpf_get_fd_by_id_opts. Keep the existing
bpf_link_get_fd_by_id(), and call bpf_link_get_fd_by_id_opts() with NULL as
opts argument, to prevent setting open_flags.
Currently, the kernel does not support non-zero open_flags for
bpf_link_get_fd_by_id_opts(), and a call with them will result in an error
returned by the bpf() system call. The caller should always pass zero
open_flags.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221006110736.84253-6-roberto.sassu@huaweicloud.com
Introduce bpf_btf_get_fd_by_id_opts(), for symmetry with
bpf_map_get_fd_by_id_opts(), to let the caller pass the newly introduced
data structure bpf_get_fd_by_id_opts. Keep the existing
bpf_btf_get_fd_by_id(), and call bpf_btf_get_fd_by_id_opts() with NULL as
opts argument, to prevent setting open_flags.
Currently, the kernel does not support non-zero open_flags for
bpf_btf_get_fd_by_id_opts(), and a call with them will result in an error
returned by the bpf() system call. The caller should always pass zero
open_flags.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221006110736.84253-5-roberto.sassu@huaweicloud.com
Introduce bpf_prog_get_fd_by_id_opts(), for symmetry with
bpf_map_get_fd_by_id_opts(), to let the caller pass the newly introduced
data structure bpf_get_fd_by_id_opts. Keep the existing
bpf_prog_get_fd_by_id(), and call bpf_prog_get_fd_by_id_opts() with NULL as
opts argument, to prevent setting open_flags.
Currently, the kernel does not support non-zero open_flags for
bpf_prog_get_fd_by_id_opts(), and a call with them will result in an error
returned by the bpf() system call. The caller should always pass zero
open_flags.
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221006110736.84253-4-roberto.sassu@huaweicloud.com
Define a new data structure called bpf_get_fd_by_id_opts, with the member
open_flags, to be used by callers of the _opts variants of
bpf_*_get_fd_by_id() to specify the permissions needed for the file
descriptor to be obtained.
Also, introduce bpf_map_get_fd_by_id_opts(), to let the caller pass a
bpf_get_fd_by_id_opts structure.
Finally, keep the existing bpf_map_get_fd_by_id(), and call
bpf_map_get_fd_by_id_opts() with NULL as opts argument, to request
read-write permissions (current behavior).
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20221006110736.84253-3-roberto.sassu@huaweicloud.com
Pull more power management updates from Rafael Wysocki:
"These update the turbostat utility, extend the macros used for
defining device power management callbacks and add a diagnostic
message to the generic power domains code.
Specifics:
- Add an error message to be printed when a power domain marked as
"always on" is not actually on during initialization (Johan
Hovold).
- Extend macros used for defining power management callbacks to allow
conditional exporting of noirq and late/early suspend/resume PM
callbacks (Paul Cercueil).
- Update the turbostat utility:
- Add support for two new platforms (Zhang Rui).
- Adjust energy unit for Sapphire Rapids (Zhang Rui).
- Do not dump TRL if turbo is not supported (Artem Bityutskiy)"
* tag 'pm-6.1-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
tools/power turbostat: version 2022.10.04
tools/power turbostat: Use standard Energy Unit for SPR Dram RAPL domain
tools/power turbostat: Do not dump TRL if turbo is not supported
tools/power turbostat: Add support for MeteorLake platforms
tools/power turbostat: Add support for RPL-S
PM: Improve EXPORT_*_DEV_PM_OPS macros
PM: domains: log failures to register always-on domains
Pull tpm updates from Jarkko Sakkinen:
"Just a few bug fixes this time"
* tag 'tpmdd-next-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
selftest: tpm2: Add Client.__del__() to close /dev/tpm* handle
security/keys: Remove inconsistent __user annotation
char: move from strlcpy with unused retval to strscpy
Pull bitmap updates from Yury Norov:
- Fix unsigned comparison to -1 in CPUMAP_FILE_MAX_BYTES (Phil Auld)
- cleanup nr_cpu_ids vs nr_cpumask_bits mess (me)
This series cleans that mess and adds new config FORCE_NR_CPUS that
allows to optimize cpumask subsystem if the number of CPUs is known
at compile-time.
- optimize find_bit() functions (me)
Reworks find_bit() functions based on new FIND_{FIRST,NEXT}_BIT()
macros.
- add find_nth_bit() (me)
Adds find_nth_bit(), which is ~70 times faster than bitcounting with
for_each() loop:
for_each_set_bit(bit, mask, size)
if (n-- == 0)
return bit;
Also adds bitmap_weight_and() to let people replace this pattern:
tmp = bitmap_alloc(nbits);
bitmap_and(tmp, map1, map2, nbits);
weight = bitmap_weight(tmp, nbits);
bitmap_free(tmp);
with a single bitmap_weight_and() call.
- repair cpumask_check() (me)
After switching cpumask to use nr_cpu_ids, cpumask_check() started
generating many false-positive warnings. This series fixes it.
- Add for_each_cpu_andnot() and for_each_cpu_andnot() (Valentin
Schneider)
Extends the API with one more function and applies it in sched/core.
* tag 'bitmap-6.1-rc1' of https://github.com/norov/linux: (28 commits)
sched/core: Merge cpumask_andnot()+for_each_cpu() into for_each_cpu_andnot()
lib/test_cpumask: Add for_each_cpu_and(not) tests
cpumask: Introduce for_each_cpu_andnot()
lib/find_bit: Introduce find_next_andnot_bit()
cpumask: fix checking valid cpu range
lib/bitmap: add tests for for_each() loops
lib/find: optimize for_each() macros
lib/bitmap: introduce for_each_set_bit_wrap() macro
lib/find_bit: add find_next{,_and}_bit_wrap
cpumask: switch for_each_cpu{,_not} to use for_each_bit()
net: fix cpu_max_bits_warn() usage in netif_attrmask_next{,_and}
cpumask: add cpumask_nth_{,and,andnot}
lib/bitmap: remove bitmap_ord_to_pos
lib/bitmap: add tests for find_nth_bit()
lib: add find_nth{,_and,_andnot}_bit()
lib/bitmap: add bitmap_weight_and()
lib/bitmap: don't call __bitmap_weight() in kernel code
tools: sync find_bit() implementation
lib/find_bit: optimize find_next_bit() functions
lib/find_bit: create find_first_zero_bit_le()
...
Pull tracing updates from Steven Rostedt:
"Major changes:
- Changed location of tracing repo from personal git repo to:
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace.git
- Added Masami Hiramatsu as co-maintainer
- Updated MAINTAINERS file to separate out FTRACE as it is more than
just TRACING.
Minor changes:
- Added Mark Rutland as FTRACE reviewer
- Updated user_events to make it on its way to remove the BROKEN tag.
The changes should now be acceptable but will run it through a
cycle and hopefully we can remove the BROKEN tag next release.
- Added filtering to eprobes
- Added a delta time to the benchmark trace event
- Have the histogram and filter callbacks called via a switch
statement instead of indirect functions. This speeds it up to avoid
retpolines.
- Add a way to wake up ring buffer waiters waiting for the ring
buffer to fill up to its watermark.
- New ioctl() on the trace_pipe_raw file to wake up ring buffer
waiters.
- Wake up waiters when the ring buffer is disabled. A reader may
block when the ring buffer is disabled, but if it was blocked when
the ring buffer is disabled it should then wake up.
Fixes:
- Allow splice to read partially read ring buffer pages. This fixes
splice never moving forward.
- Fix inverted compare that made the "shortest" ring buffer wait
queue actually the longest.
- Fix a race in the ring buffer between resetting a page when a
writer goes to another page, and the reader.
- Fix ftrace accounting bug when function hooks are added at boot up
before the weak functions are set to "disabled".
- Fix bug that freed a user allocated snapshot buffer when enabling a
tracer.
- Fix possible recursive locks in osnoise tracer
- Fix recursive locking direct functions
- Other minor clean ups and fixes"
* tag 'trace-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (44 commits)
ftrace: Create separate entry in MAINTAINERS for function hooks
tracing: Update MAINTAINERS to reflect new tracing git repo
tracing: Do not free snapshot if tracer is on cmdline
ftrace: Still disable enabled records marked as disabled
tracing/user_events: Move pages/locks into groups to prepare for namespaces
tracing: Add Masami Hiramatsu as co-maintainer
tracing: Remove unused variable 'dups'
MAINTAINERS: add myself as a tracing reviewer
ring-buffer: Fix race between reset page and reading page
tracing/user_events: Update ABI documentation to align to bits vs bytes
tracing/user_events: Use bits vs bytes for enabled status page data
tracing/user_events: Use refcount instead of atomic for ref tracking
tracing/user_events: Ensure user provided strings are safely formatted
tracing/user_events: Use WRITE instead of READ for io vector import
tracing/user_events: Use NULL for strstr checks
tracing: Fix spelling mistake "preapre" -> "prepare"
tracing: Wake up waiters when tracing is disabled
tracing: Add ioctl() to force ring buffer waiters to wake up
tracing: Wake up ring buffer waiters on closing of the file
ring-buffer: Add ring_buffer_wake_waiters()
...
Pull livepatching updates from Petr Mladek:
- Fix race between fork and livepatch transition revert
- Add sysfs entry that shows "patched" state for each object (module)
that can be livepatched by the given livepatch
- Some clean up
* tag 'livepatching-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
selftests/livepatch: add sysfs test
livepatch: add sysfs entry "patched" for each klp_object
selftests/livepatch: normalize sysctl error message
livepatch: Add a missing newline character in klp_module_coming()
livepatch: fix race between fork and KLP transition
Pull cgroup updates from Tejun Heo:
- cpuset now support isolated cpus.partition type, which will enable
dynamic CPU isolation
- pids.peak added to remember the max number of pids used
- holes in cgroup namespace plugged
- internal cleanups
* tag 'cgroup-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (25 commits)
cgroup: use strscpy() is more robust and safer
iocost_monitor: reorder BlkgIterator
cgroup: simplify code in cgroup_apply_control
cgroup: Make cgroup_get_from_id() prettier
cgroup/cpuset: remove unreachable code
cgroup: Remove CFTYPE_PRESSURE
cgroup: Improve cftype add/rm error handling
kselftest/cgroup: Add cpuset v2 partition root state test
cgroup/cpuset: Update description of cpuset.cpus.partition in cgroup-v2.rst
cgroup/cpuset: Make partition invalid if cpumask change violates exclusivity rule
cgroup/cpuset: Relocate a code block in validate_change()
cgroup/cpuset: Show invalid partition reason string
cgroup/cpuset: Add a new isolated cpus.partition type
cgroup/cpuset: Relax constraints to partition & cpus changes
cgroup/cpuset: Allow no-task partition to have empty cpuset.cpus.effective
cgroup/cpuset: Miscellaneous cleanups & add helper functions
cgroup/cpuset: Enable update_tasks_cpumask() on top_cpuset
cgroup: add pids.peak interface for pids controller
cgroup: Remove data-race around cgrp_dfl_visible
cgroup: Fix build failure when CONFIG_SHRINKER_DEBUG
...
Pull objtool updates from Ingo Molnar:
- Remove the "ANNOTATE_NOENDBR on ENDBR" warning: it's not really
useful and only found a non-bug false positive so far.
- Properly decode LOOP/LOOPE/LOOPNE, which were missing from the x86
decoder. Because these instructions are rather ineffective, they
never showed up in compiler output, but they are simple enough to
support, so add them for completeness.
- A bit more cross-arch preparatory work.
* tag 'objtool-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool,x86: Teach decode about LOOP* instructions
objtool: Remove "ANNOTATE_NOENDBR on ENDBR" warning
objtool: Use arch_jump_destination() in read_intra_function_calls()
Pull locking updates from Ingo Molnar:
- Disable preemption in rwsem_write_trylock()'s attempt to take the
rwsem, to avoid RT tasks hogging the CPU, which managed to preempt
this function after the owner has been cleared but before a new owner
is set. Also add debug checks to enforce this.
- Add __lockfunc to more slow path functions and add __sched to
semaphore functions.
- Mark spinlock APIs noinline when the respective CONFIG_INLINE_SPIN_*
toggles are disabled, to reduce LTO text size.
- Print more debug information when lockdep gets confused in
look_up_lock_class().
- Improve header file abuse checks.
- Misc cleanups
* tag 'locking-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/lockdep: Print more debug information - report name and key when look_up_lock_class() got confused
locking: Add __sched to semaphore functions
locking/rwsem: Disable preemption while trying for rwsem lock
locking: Detect includes rwlock.h outside of spinlock.h
locking: Add __lockfunc to slow path functions
locking/spinlocks: Mark spinlocks noinline when inline spinlocks are disabled
selftests: futex: Fix 'the the' typo in comment
Pull powerpc updates from Michael Ellerman:
- Remove our now never-true definitions for pgd_huge() and p4d_leaf().
- Add pte_needs_flush() and huge_pmd_needs_flush() for 64-bit.
- Add support for syscall wrappers.
- Add support for KFENCE on 64-bit.
- Update 64-bit HV KVM to use the new guest state entry/exit accounting
API.
- Support execute-only memory when using the Radix MMU (P9 or later).
- Implement CONFIG_PARAVIRT_TIME_ACCOUNTING for pseries guests.
- Updates to our linker script to move more data into read-only
sections.
- Allow the VDSO to be randomised on 32-bit.
- Many other small features and fixes.
Thanks to Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Athira
Rajeev, Christophe Leroy, David Hildenbrand, Disha Goel, Fabiano Rosas,
Gaosheng Cui, Gustavo A. R. Silva, Haren Myneni, Hari Bathini, Jilin
Yuan, Joel Stanley, Kajol Jain, Kees Cook, Krzysztof Kozlowski, Laurent
Dufour, Liang He, Li Huafei, Lukas Bulwahn, Madhavan Srinivasan, Nathan
Chancellor, Nathan Lynch, Nicholas Miehlbradt, Nicholas Piggin, Pali
Rohár, Rohan McLure, Russell Currey, Sachin Sant, Segher Boessenkool,
Shrikanth Hegde, Tyrel Datwyler, Wolfram Sang, ye xingchen, and Zheng
Yongjun.
* tag 'powerpc-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (214 commits)
KVM: PPC: Book3S HV: Fix stack frame regs marker
powerpc: Don't add __powerpc_ prefix to syscall entry points
powerpc/64s/interrupt: Fix stack frame regs marker
powerpc/64: Fix msr_check_and_set/clear MSR[EE] race
powerpc/64s/interrupt: Change must-hard-mask interrupt check from BUG to WARN
powerpc/pseries: Add firmware details to the hardware description
powerpc/powernv: Add opal details to the hardware description
powerpc: Add device-tree model to the hardware description
powerpc/64: Add logical PVR to the hardware description
powerpc: Add PVR & CPU name to hardware description
powerpc: Add hardware description string
powerpc/configs: Enable PPC_UV in powernv_defconfig
powerpc/configs: Update config files for removed/renamed symbols
powerpc/mm: Fix UBSAN warning reported on hugetlb
powerpc/mm: Always update max/min_low_pfn in mem_topology_setup()
powerpc/mm/book3s/hash: Rename flush_tlb_pmd_range
powerpc: Drops STABS_DEBUG from linker scripts
powerpc/64s: Remove lost/old comment
powerpc/64s: Remove old STAB comment
powerpc: remove orphan systbl_chk.sh
...
