Since patch 845802b112 function gfs2_write_buf_to_page checks if the
target inode is jdata or ordered. This function only operates on the
system quota file, which is always jdata, so the check for jdata is
useless. This patch removes it.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
This patch adds a new mount option quota=quiet which is the same as
quota=on but it suppresses gfs2 quota error messages.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Add the device name to the names of the gfs2_logd and gfs2_quotad kernel
threads to allow for easier identification.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Rename the "gfs_recovery" workqueue to "gfs2_recovery", and
gfs_recovery_wq to gfs2_recovery_wq.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Function gfs2_withdraw() tries to synchronize concurrent callers by
atomically setting the SDF_WITHDRAWN flag in the first caller, setting
the SDF_WITHDRAW_IN_PROG flag to indicate that a withdraw is in
progress, performing the actual withdraw, and clearing the
SDF_WITHDRAW_IN_PROG flag when done. All other callers wait for the
SDF_WITHDRAW_IN_PROG flag to be cleared before returning.
This leaves a small window in which callers can find the SDF_WITHDRAWN
flag set before the SDF_WITHDRAW_IN_PROG flag has been set, causing them
to return prematurely, before the withdraw has been completed.
Fix that by setting the SDF_WITHDRAWN and SDF_WITHDRAW_IN_PROG flags
atomically.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Immediately stop the logd and quotad kernel threads when a filesystem
withdraw is detected: those threads aren't doing anything useful after a
withdraw. (Depends on the extra logd and quotad task struct references
held since commit 7a109f383fa3 ("gfs2: Fix asynchronous thread
destruction").)
In addition, check for kthread_should_stop() in the wait condition in
gfs2_quotad() to stop immediately when kthread_stop() is called.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The kernel threads are currently stopped and destroyed synchronously by
gfs2_make_fs_ro() and gfs2_put_super(), and asynchronously by
signal_our_withdraw(), with no synchronization, so the synchronous and
asynchronous contexts can race with each other.
First, when creating the kernel threads, take an extra task struct
reference so that the task struct won't go away immediately when they
terminate. This allows those kthreads to terminate immediately when
they're done rather than hanging around as zombies until they are reaped
by kthread_stop(). When kthread_stop() is called on a terminated
kthread, it will return immediately.
Second, in signal_our_withdraw(), once the SDF_JOURNAL_LIVE flag has
been cleared, wake up the logd and quotad wait queues instead of
stopping the logd and quotad kthreads. The kthreads are then expected
to terminate automatically within short time, but if they cannot, they
will not block the withdraw.
For example, if a user process and one of the kthread decide to withdraw
at the same time, only one of them will perform the actual withdraw and
the other will wait for it to be done. If the kthread ends up being the
one to wait, the withdrawing user process won't be able to stop it.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
[ 81.372851][ T5532] CPU: 1 PID: 5532 Comm: syz-executor.0 Not tainted 6.2.0-rc1-syzkaller-dirty #0
[ 81.382080][ T5532] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023
[ 81.392343][ T5532] Call Trace:
[ 81.395654][ T5532] <TASK>
[ 81.398603][ T5532] dump_stack_lvl+0x1b1/0x290
[ 81.418421][ T5532] gfs2_assert_warn_i+0x19a/0x2e0
[ 81.423480][ T5532] gfs2_quota_cleanup+0x4c6/0x6b0
[ 81.428611][ T5532] gfs2_make_fs_ro+0x517/0x610
[ 81.457802][ T5532] gfs2_withdraw+0x609/0x1540
[ 81.481452][ T5532] gfs2_inode_refresh+0xb2d/0xf60
[ 81.506658][ T5532] gfs2_instantiate+0x15e/0x220
[ 81.511504][ T5532] gfs2_glock_wait+0x1d9/0x2a0
[ 81.516352][ T5532] do_sync+0x485/0xc80
[ 81.554943][ T5532] gfs2_quota_sync+0x3da/0x8b0
[ 81.559738][ T5532] gfs2_sync_fs+0x49/0xb0
[ 81.564063][ T5532] sync_filesystem+0xe8/0x220
[ 81.568740][ T5532] generic_shutdown_super+0x6b/0x310
[ 81.574112][ T5532] kill_block_super+0x79/0xd0
[ 81.578779][ T5532] deactivate_locked_super+0xa7/0xf0
[ 81.584064][ T5532] cleanup_mnt+0x494/0x520
[ 81.593753][ T5532] task_work_run+0x243/0x300
[ 81.608837][ T5532] exit_to_user_mode_loop+0x124/0x150
[ 81.614232][ T5532] exit_to_user_mode_prepare+0xb2/0x140
[ 81.619820][ T5532] syscall_exit_to_user_mode+0x26/0x60
[ 81.625287][ T5532] do_syscall_64+0x49/0xb0
[ 81.629710][ T5532] entry_SYSCALL_64_after_hwframe+0x63/0xcd
In this backtrace, gfs2_quota_sync() takes quota data references and
then calls do_sync(). Function do_sync() encounters filesystem
corruption and withdraws the filesystem, which (among other things) calls
gfs2_quota_cleanup(). Function gfs2_quota_cleanup() wrongly assumes
that nobody is holding any quota data references anymore, and destroys
all quota data objects. When gfs2_quota_sync() then resumes and
dereferences the quota data objects it is holding, those objects are no
longer there.
Function gfs2_quota_cleanup() deals with resource deallocation and can
easily be delayed until gfs2_put_super() in the case of a filesystem
withdraw. In fact, most of the other work gfs2_make_fs_ro() does is
unnecessary during a withdraw as well, so change signal_our_withdraw()
to skip gfs2_make_fs_ro() and perform the necessary steps directly
instead.
Thanks to Edward Adam Davis <eadavis@sina.com> for the initial patches.
Link: https://lore.kernel.org/all/0000000000002b5e2405f14e860f@google.com
Reported-by: syzbot+3f6a670108ce43356017@syzkaller.appspotmail.com
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
In gfs2_quota_cleanup(), wait for the quota data objects to be freed
before returning. Otherwise, there is no guarantee that the quota data
objects will be gone when their kmem cache is destroyed.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Fix the refcount of quota data objects created directly by
gfs2_quota_init(): those are placed into the in-memory quota "database"
for eventual syncing to the main quota file, but they are not actively
held and should thus have an initial refcount of 0.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Once a filesystem is withdrawn, don't complain about quota changes
that can't be synced to the main quota file anymore.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Rename gfs2_qd_dispose() to gfs2_qd_dispose_list(). Move some code
duplicated in gfs2_qd_dispose_list() and gfs2_quota_cleanup() into a
new gfs2_qd_dispose() function.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Change gfs2_quota_cleanup() to move the quota data objects to dispose of
on a dispose list and call gfs2_qd_dispose() on that list, like
gfs2_qd_shrink_scan() does, instead of disposing of the quota data
objects directly.
This may look a bit pointless by itself, but it will make more sense in
combination with a fix that follows.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Function gfs2_qd_isolate must only return LRU_REMOVED when removing the
item from the lru list; otherwise, the number of items on the list will
go wrong.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Rename the SDF_DEACTIVATING flag to SDF_KILL to make it more obvious
that this relates to the kill_sb filesystem operation.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Rename sd_glock_wait to sd_kill_wait: we'll use it for other things
related to "killing" a filesystem on unmount soon (kill_sb).
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch many of the functions in quota.c got their superblock
pointer, sdp, from the quota_data's glock pointer. That's silly because
the qd already has its own pointer to the superblock (qd_sbd).
This patch changes references to use that instead, eliminating a level
of indirection.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Commit f07b352021 ("GFS2: Made logd daemon take into account log
demand") changed gfs2_ail_flush_reqd() and gfs2_jrnl_flush_reqd() to
take sd_log_blks_needed into account, but the checks in
gfs2_log_commit() were not updated correspondingly.
Once that is fixed, gfs2_jrnl_flush_reqd() and gfs2_ail_flush_reqd() can
be used in gfs2_log_commit(). Make those two helpers available to
gfs2_log_commit() by defining them above gfs2_log_commit().
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
When quotad detects an I/O error, it sets sd_log_error and then it wakes
up logd to withdraw the filesystem. However, logd doesn't wake up when
sd_log_error is set. Fix that.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
First, function gfs2_ail_flush_reqd checks the SDF_FORCE_AIL_FLUSH flag
to determine if an AIL flush should be forced in low-memory situations.
However, it also immediately clears the flag, and when called repeatedly
as in function gfs2_logd, the flag will be lost. Fix that by pulling
the SDF_FORCE_AIL_FLUSH flag check out of gfs2_ail_flush_reqd.
Second, function gfs2_writepages sets the SDF_FORCE_AIL_FLUSH flag
whether or not enough pages were written. If enough pages could be
written, flushing the AIL is unnecessary, though.
Third, gfs2_writepages doesn't wake up logd after setting the
SDF_FORCE_AIL_FLUSH flag, so it can take a long time for logd to react.
It would be preferable to wake up logd, but that hurts the performance
of some workloads and we don't quite understand why so far, so don't
wake up logd so far.
Fixes: b066a4eebd ("gfs2: forcibly flush ail to relieve memory pressure")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Consider the following case:
1. A glock is held in shared mode.
2. A process requests the glock in exclusive mode (rename).
3. Before the lock is granted, more processes (read / ls) request the
glock in shared mode again.
4. gfs2 sends a request to dlm for the lock in exclusive mode because
that holder is at the head of the queue.
5. Somehow the dlm request gets canceled, so dlm sends us back a
response with state == LM_ST_SHARED and LM_OUT_CANCELED. So at that
point, the glock is still held in shared mode.
6. finish_xmote gets called to process the response from dlm. It detects
that the glock is not in the requested mode and no demote is in
progress, so it moves the canceled holder to the tail of the queue
and finds the new holder at the head of the queue. That holder is
requesting the glock in shared mode.
7. finish_xmote calls do_xmote to transition the glock into shared mode,
but the glock is already in shared mode and so do_xmote complains
about that with:
GLOCK_BUG_ON(gl, gl->gl_state == gl->gl_target);
Instead, in finish_xmote, after moving the canceled holder to the tail
of the queue, check if any new holders can be granted. Only call
do_xmote to repeat the dlm request if the holder at the head of the
queue is requesting the glock in a mode that is incompatible with the
mode the glock is currently held in.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The last user of this flag was removed in commit b77b4a4815 ("gfs2:
Rework freeze / thaw logic").
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Revert the rest of commit 220cca2a4f ("GFS2: Change truncate page
allocation to be GFP_NOFS"):
In gfs2_unstuff_dinode(), there is no need to carry out the page cache
allocation under GFP_NOFS because inodes on the "regular" filesystem are
never un-inlined under memory pressure, so switch back from
find_or_create_page() to grab_cache_page() here as well.
Inodes on the "metadata" filesystem can theoretically be un-inlined
under memory pressure, but any page cache allocations in that context
would happen in GFP_NOFS context because those inodes have
inode->i_mapping->gfp_mask set to GFP_NOFS (see the previous patch).
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Set mapping->gfp mask to GFP_NOFS for all metadata inodes so that
allocating pages in the address space of those inodes won't call back
into the filesystem. This allows to switch back from
find_or_create_page() to grab_cache_page() in two places.
Partially reverts commit 220cca2a4f ("GFS2: Change truncate page
allocation to be GFP_NOFS").
Thanks to Dan Carpenter <dan.carpenter@linaro.org> for pointing out a
Smatch static checker warning.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Simplify code pattern of 'folio->index + folio_nr_pages(folio)' by using
the existing helper folio_next_index().
Signed-off-by: Minjie Du <duminjie@vivo.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
ovl_{read,write}_iter() always call fdput(real) to put one or zero
refcounts of the real file, but for aio, whether it was submitted or not,
ovl_aio_put() also calls fdput(), which is not balanced. This is only a
problem in the less common case when FDPUT_FPUT flag is set.
To fix the problem use get_file() to take file refcount and use fput()
instead of fdput() in ovl_aio_put().
Fixes: 2406a307ac ("ovl: implement async IO routines")
Cc: <stable@vger.kernel.org> # v5.6
Reviewed-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Some local filesystems support setting persistent fileattr flags
(e.g. FS_NOATIME_FL) on directories and regular files via ioctl.
Some of those persistent fileattr flags are reflected to vfs as
in-memory inode flags (e.g. S_NOATIME).
Overlayfs uses the in-memory inode flags (e.g. S_NOATIME) on a lower file
as an indication that a the lower file may have persistent inode fileattr
flags (e.g. FS_NOATIME_FL) that need to be copied to upper file.
However, in some cases, the S_NOATIME in-memory flag could be a false
indication for persistent FS_NOATIME_FL fileattr. For example, with NFS
and FUSE lower fs, as was the case in the two bug reports, the S_NOATIME
flag is set unconditionally for all inodes.
Users cannot set persistent fileattr flags on symlinks and special files,
but in some local fs, such as ext4/btrfs/tmpfs, the FS_NOATIME_FL fileattr
flag are inheritted to symlinks and special files from parent directory.
In both cases described above, when lower symlink has the S_NOATIME flag,
overlayfs will try to copy the symlink's fileattrs and fail with error
ENOXIO, because it could not open the symlink for the ioctl security hook.
To solve this failure, do not attempt to copyup fileattrs for anything
other than directories and regular files.
Reported-by: Ruiwen Zhao <ruiwen@google.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217850
Fixes: 72db82115d ("ovl: copy up sync/noatime fileattr flags")
Cc: <stable@vger.kernel.org> # v5.15
Reviewed-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
ksmbd has made significant improvements over the past two
years and is regularly tested and used. Remove the experimental
warning.
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull f2fs updates from Jaegeuk Kim:
"In this cycle, we don't have a highlighted feature enhancement, but
mostly have fixed issues mainly in two parts: 1) zoned block device,
and 2) compression support.
For zoned block device, we've tried to improve the power-off recovery
flow as much as possible. For compression, we found some corner cases
caused by wrong compression policy and logics. Other than them, there
were some reverts and stat corrections.
Bug fixes:
- use finish zone command when closing a zone
- check zone type before sending async reset zone command
- fix to assign compress_level for lz4 correctly
- fix error path of f2fs_submit_page_read()
- don't {,de}compress non-full cluster
- send small discard commands during checkpoint back
- flush inode if atomic file is aborted
- correct to account gc/cp stats
And, there are minor bug fixes, avoiding false lockdep warning, and
clean-ups"
* tag 'f2fs-for-6-6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (25 commits)
f2fs: use finish zone command when closing a zone
f2fs: compress: fix to assign compress_level for lz4 correctly
f2fs: fix error path of f2fs_submit_page_read()
f2fs: clean up error handling in sanity_check_{compress_,}inode()
f2fs: avoid false alarm of circular locking
Revert "f2fs: do not issue small discard commands during checkpoint"
f2fs: doc: fix description of max_small_discards
f2fs: should update REQ_TIME for direct write
f2fs: fix to account cp stats correctly
f2fs: fix to account gc stats correctly
f2fs: remove unneeded check condition in __f2fs_setxattr()
f2fs: fix to update i_ctime in __f2fs_setxattr()
Revert "f2fs: fix to do sanity check on extent cache correctly"
f2fs: increase usage of folio_next_index() helper
f2fs: Only lfs mode is allowed with zoned block device feature
f2fs: check zone type before sending async reset zone command
f2fs: compress: don't {,de}compress non-full cluster
f2fs: allow f2fs_ioc_{,de}compress_file to be interrupted
f2fs: don't reopen the main block device in f2fs_scan_devices
f2fs: fix to avoid mmap vs set_compress_option case
...
With madvise and prctl KSM can be enabled for different VMA's. Once it is
enabled we can query how effective KSM is overall. However we cannot
easily query if an individual VMA benefits from KSM.
This commit adds a KSM section to the /prod/<pid>/smaps file. It reports
how many of the pages are KSM pages. Note that KSM-placed zeropages are
not included, only actual KSM pages.
Here is a typical output:
7f420a000000-7f421a000000 rw-p 00000000 00:00 0
Size: 262144 kB
KernelPageSize: 4 kB
MMUPageSize: 4 kB
Rss: 51212 kB
Pss: 8276 kB
Shared_Clean: 172 kB
Shared_Dirty: 42996 kB
Private_Clean: 196 kB
Private_Dirty: 7848 kB
Referenced: 15388 kB
Anonymous: 51212 kB
KSM: 41376 kB
LazyFree: 0 kB
AnonHugePages: 0 kB
ShmemPmdMapped: 0 kB
FilePmdMapped: 0 kB
Shared_Hugetlb: 0 kB
Private_Hugetlb: 0 kB
Swap: 202016 kB
SwapPss: 3882 kB
Locked: 0 kB
THPeligible: 0
ProtectionKey: 0
ksm_state: 0
ksm_skip_base: 0
ksm_skip_count: 0
VmFlags: rd wr mr mw me nr mg anon
This information also helps with the following workflow:
- First enable KSM for all the VMA's of a process with prctl.
- Then analyze with the above smaps report which VMA's benefit the most
- Change the application (if possible) to add the corresponding madvise
calls for the VMA's that benefit the most
[shr@devkernel.io: v5]
Link: https://lkml.kernel.org/r/20230823170107.1457915-1-shr@devkernel.io
Link: https://lkml.kernel.org/r/20230822180539.1424843-1-shr@devkernel.io
Signed-off-by: Stefan Roesch <shr@devkernel.io>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull pstore fix from Kees Cook:
- Adjust sizes of buffers just avoid uncompress failures (Ard
Biesheuvel)
* tag 'pstore-v6.6-rc1-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
pstore: Base compression input buffer size on estimated compressed size
Pull tracing updates from Steven Rostedt:
"User visible changes:
- Added a way to easier filter with cpumasks:
# echo 'cpumask & CPUS{17-42}' > /sys/kernel/tracing/events/ipi_send_cpumask/filter
- Show actual size of ring buffer after modifying the ring buffer
size via buffer_size_kb.
Currently it just returns what was written, but the actual size
rounds up to the sub buffer size. Show that real size instead.
Major changes:
- Added "eventfs". This is the code that handles the inodes and
dentries of tracefs/events directory. As there are thousands of
events, and each event has several inodes and dentries that
currently exist even when tracing is never used, they take up
precious memory. Instead, eventfs will allocate the inodes and
dentries in a JIT way (similar to what procfs does). There is now
metadata that handles the events and subdirectories, and will
create the inodes and dentries when they are used.
Note, I also have patches that remove the subdirectory meta data,
but will wait till the next merge window before applying them. It's
a little more complex, and I want to make sure the dynamic code
works properly before adding more complexity, making it easier to
revert if need be.
Minor changes:
- Optimization to user event list traversal
- Remove intermediate permission of tracefs files (note the
intermediate permission removes all access to the files so it is
not a security concern, but just a clean up)
- Add the complex fix to FORTIFY_SOURCE to the kernel stack event
logic
- Other minor cleanups"
* tag 'trace-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (29 commits)
tracefs: Remove kerneldoc from struct eventfs_file
tracefs: Avoid changing i_mode to a temp value
tracing/user_events: Optimize safe list traversals
ftrace: Remove empty declaration ftrace_enable_daemon() and ftrace_disable_daemon()
tracing: Remove unused function declarations
tracing/filters: Document cpumask filtering
tracing/filters: Further optimise scalar vs cpumask comparison
tracing/filters: Optimise CPU vs cpumask filtering when the user mask is a single CPU
tracing/filters: Optimise scalar vs cpumask filtering when the user mask is a single CPU
tracing/filters: Optimise cpumask vs cpumask filtering when user mask is a single CPU
tracing/filters: Enable filtering the CPU common field by a cpumask
tracing/filters: Enable filtering a scalar field by a cpumask
tracing/filters: Enable filtering a cpumask field by another cpumask
tracing/filters: Dynamically allocate filter_pred.regex
test: ftrace: Fix kprobe test for eventfs
eventfs: Move tracing/events to eventfs
eventfs: Implement removal of meta data from eventfs
eventfs: Implement functions to create files and dirs when accessed
eventfs: Implement eventfs lookup, read, open functions
eventfs: Implement eventfs file add functions
...
Pull char/misc driver updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
changes for 6.6-rc1.
Stuff all over the place here, lots of driver updates and changes and
new additions. Short summary is:
- new IIO drivers and updates
- Interconnect driver updates
- fpga driver updates and additions
- fsi driver updates
- mei driver updates
- coresight driver updates
- nvmem driver updates
- counter driver updates
- lots of smaller misc and char driver updates and additions
All of these have been in linux-next for a long time with no reported
problems"
* tag 'char-misc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (267 commits)
nvmem: core: Notify when a new layout is registered
nvmem: core: Do not open-code existing functions
nvmem: core: Return NULL when no nvmem layout is found
nvmem: core: Create all cells before adding the nvmem device
nvmem: u-boot-env:: Replace zero-length array with DECLARE_FLEX_ARRAY() helper
nvmem: sec-qfprom: Add Qualcomm secure QFPROM support
dt-bindings: nvmem: sec-qfprom: Add bindings for secure qfprom
dt-bindings: nvmem: Add compatible for QCM2290
nvmem: Kconfig: Fix typo "drive" -> "driver"
nvmem: Explicitly include correct DT includes
nvmem: add new NXP QorIQ eFuse driver
dt-bindings: nvmem: Add t1023-sfp efuse support
dt-bindings: nvmem: qfprom: Add compatible for MSM8226
nvmem: uniphier: Use devm_platform_get_and_ioremap_resource()
nvmem: qfprom: do some cleanup
nvmem: stm32-romem: Use devm_platform_get_and_ioremap_resource()
nvmem: rockchip-efuse: Use devm_platform_get_and_ioremap_resource()
nvmem: meson-mx-efuse: Convert to devm_platform_ioremap_resource()
nvmem: lpc18xx_otp: Convert to devm_platform_ioremap_resource()
nvmem: brcm_nvram: Use devm_platform_get_and_ioremap_resource()
...
Pull driver core updates from Greg KH:
"Here is a small set of driver core updates and additions for 6.6-rc1.
Included in here are:
- stable kernel documentation updates
- class structure const work from Ivan on various subsystems
- kernfs tweaks
- driver core tests!
- kobject sanity cleanups
- kobject structure reordering to save space
- driver core error code handling fixups
- other minor driver core cleanups
All of these have been in linux-next for a while with no reported
problems"
* tag 'driver-core-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (32 commits)
driver core: Call in reversed order in device_platform_notify_remove()
driver core: Return proper error code when dev_set_name() fails
kobject: Remove redundant checks for whether ktype is NULL
kobject: Add sanity check for kset->kobj.ktype in kset_register()
drivers: base: test: Add missing MODULE_* macros to root device tests
drivers: base: test: Add missing MODULE_* macros for platform devices tests
drivers: base: Free devm resources when unregistering a device
drivers: base: Add basic devm tests for platform devices
drivers: base: Add basic devm tests for root devices
kernfs: fix missing kernfs_iattr_rwsem locking
docs: stable-kernel-rules: mention that regressions must be prevented
docs: stable-kernel-rules: fine-tune various details
docs: stable-kernel-rules: make the examples for option 1 a proper list
docs: stable-kernel-rules: move text around to improve flow
docs: stable-kernel-rules: improve structure by changing headlines
base/node: Remove duplicated include
kernfs: attach uuid for every kernfs and report it in fsid
kernfs: add stub helper for kernfs_generic_poll()
x86/resctrl: make pseudo_lock_class a static const structure
x86/MSR: make msr_class a static const structure
...
Pull RISC-V updates from Palmer Dabbelt:
- Support for the new "riscv,isa-extensions" and "riscv,isa-base"
device tree interfaces for probing extensions
- Support for userspace access to the performance counters
- Support for more instructions in kprobes
- Crash kernels can be allocated above 4GiB
- Support for KCFI
- Support for ELFs in !MMU configurations
- ARCH_KMALLOC_MINALIGN has been reduced to 8
- mmap() defaults to sv48-sized addresses, with longer addresses hidden
behind a hint (similar to Arm and Intel)
- Also various fixes and cleanups
* tag 'riscv-for-linus-6.6-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (51 commits)
lib/Kconfig.debug: Restrict DEBUG_INFO_SPLIT for RISC-V
riscv: support PREEMPT_DYNAMIC with static keys
riscv: Move create_tmp_mapping() to init sections
riscv: Mark KASAN tmp* page tables variables as static
riscv: mm: use bitmap_zero() API
riscv: enable DEBUG_FORCE_FUNCTION_ALIGN_64B
riscv: remove redundant mv instructions
RISC-V: mm: Document mmap changes
RISC-V: mm: Update pgtable comment documentation
RISC-V: mm: Add tests for RISC-V mm
RISC-V: mm: Restrict address space for sv39,sv48,sv57
riscv: enable DMA_BOUNCE_UNALIGNED_KMALLOC for !dma_coherent
riscv: allow kmalloc() caches aligned to the smallest value
riscv: support the elf-fdpic binfmt loader
binfmt_elf_fdpic: support 64-bit systems
riscv: Allow CONFIG_CFI_CLANG to be selected
riscv/purgatory: Disable CFI
riscv: Add CFI error handling
riscv: Add ftrace_stub_graph
riscv: Add types to indirectly called assembly functions
...
Pull NFS client updates from Anna Schumaker:
"New Features:
- Enable the NFS v4.2 READ_PLUS operation by default
Stable Fixes:
- NFSv4/pnfs: minor fix for cleanup path in nfs4_get_device_info
- NFS: Fix a potential data corruption
Bugfixes:
- Fix various READ_PLUS issues including:
- smatch warnings
- xdr size calculations
- scratch buffer handling
- 32bit / highmem xdr page handling
- Fix checkpatch errors in file.c
- Fix redundant readdir request after an EOF
- Fix handling of COPY ERR_OFFLOAD_NO_REQ
- Fix assignment of xprtdata.cred
Cleanups:
- Remove unused xprtrdma function declarations
- Clean up an integer overflow check to avoid a warning
- Clean up #includes in dns_resolve.c
- Clean up nfs4_get_device_info so we don't pass a NULL pointer
to __free_page()
- Clean up sunrpc TCP socket timeout configuration
- Guard against READDIR loops when entry names are too long
- Use EXCHID4_FLAG_USE_PNFS_DS for DS servers"
* tag 'nfs-for-6.6-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (22 commits)
pNFS: Fix assignment of xprtdata.cred
NFSv4.2: fix handling of COPY ERR_OFFLOAD_NO_REQ
NFS: Guard against READDIR loop when entry names exceed MAXNAMELEN
NFSv4.1: use EXCHGID4_FLAG_USE_PNFS_DS for DS server
NFS/pNFS: Set the connect timeout for the pNFS flexfiles driver
SUNRPC: Don't override connect timeouts in rpc_clnt_add_xprt()
SUNRPC: Allow specification of TCP client connect timeout at setup
SUNRPC: Refactor and simplify connect timeout
SUNRPC: Set the TCP_SYNCNT to match the socket timeout
NFS: Fix a potential data corruption
nfs: fix redundant readdir request after get eof
nfs/blocklayout: Use the passed in gfp flags
filemap: Fix errors in file.c
NFSv4/pnfs: minor fix for cleanup path in nfs4_get_device_info
NFS: Move common includes outside ifdef
SUNRPC: clean up integer overflow check
xprtrdma: Remove unused function declaration rpcrdma_bc_post_recv()
NFS: Enable the READ_PLUS operation by default
SUNRPC: kmap() the xdr pages during decode
NFSv4.2: Rework scratch handling for READ_PLUS (again)
...
Pull nfsd updates from Chuck Lever:
"I'm thrilled to announce that the Linux in-kernel NFS server now
offers NFSv4 write delegations. A write delegation enables a client to
cache data and metadata for a single file more aggressively, reducing
network round trips and server workload. Many thanks to Dai Ngo for
contributing this facility, and to Jeff Layton and Neil Brown for
reviewing and testing it.
This release also sees the removal of all support for DES- and
triple-DES-based Kerberos encryption types in the kernel's SunRPC
implementation. These encryption types have been deprecated by the
Internet community for years and are considered insecure. This change
affects both the in-kernel NFS client and server.
The server's UDP and TCP socket transports have now fully adopted
David Howells' new bio_vec iterator so that no more than one sendmsg()
call is needed to transmit each RPC message. In particular, this helps
kTLS optimize record boundaries when sending RPC-with-TLS replies, and
it takes the server a baby step closer to handling file I/O via
folios.
We've begun work on overhauling the SunRPC thread scheduler to remove
a costly linked-list walk when looking for an idle RPC service thread
to wake. The pre-requisites are included in this release. Thanks to
Neil Brown for his ongoing work on this improvement"
* tag 'nfsd-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (56 commits)
Documentation: Add missing documentation for EXPORT_OP flags
SUNRPC: Remove unused declaration rpc_modcount()
SUNRPC: Remove unused declarations
NFSD: da_addr_body field missing in some GETDEVICEINFO replies
SUNRPC: Remove return value of svc_pool_wake_idle_thread()
SUNRPC: make rqst_should_sleep() idempotent()
SUNRPC: Clean up svc_set_num_threads
SUNRPC: Count ingress RPC messages per svc_pool
SUNRPC: Deduplicate thread wake-up code
SUNRPC: Move trace_svc_xprt_enqueue
SUNRPC: Add enum svc_auth_status
SUNRPC: change svc_xprt::xpt_flags bits to enum
SUNRPC: change svc_rqst::rq_flags bits to enum
SUNRPC: change svc_pool::sp_flags bits to enum
SUNRPC: change cache_head.flags bits to enum
SUNRPC: remove timeout arg from svc_recv()
SUNRPC: change svc_recv() to return void.
SUNRPC: call svc_process() from svc_recv().
nfsd: separate nfsd_last_thread() from nfsd_put()
nfsd: Simplify code around svc_exit_thread() call in nfsd()
...
Pull smb server updates from Steve French:
- fix potential overflows in decoding create and in session setup
requests
- cleanup fixes
- compounding fixes, including one for MacOS compounded read requests
- session setup error handling fix
- fix mode bit bug when applying force_directory_mode and
force_create_mode
- RDMA (smbdirect) write fix
* tag '6.6-rc-ksmbd-fixes-part1' of git://git.samba.org/ksmbd:
ksmbd: add missing calling smb2_set_err_rsp() on error
ksmbd: replace one-element array with flex-array member in struct smb2_ea_info
ksmbd: fix slub overflow in ksmbd_decode_ntlmssp_auth_blob()
ksmbd: fix wrong DataOffset validation of create context
ksmbd: Fix one kernel-doc comment
ksmbd: reduce descriptor size if remaining bytes is less than request size
ksmbd: fix `force create mode' and `force directory mode'
ksmbd: fix wrong interim response on compound
ksmbd: add support for read compound
ksmbd: switch to use kmemdup_nul() helper
Pull jfs updates from Dave Kleikamp:
"A few small fixes"
* tag 'jfs-6.6' of github.com:kleikamp/linux-shaggy:
jfs: validate max amount of blocks before allocation.
jfs: remove redundant initialization to pointer ip
jfs: fix invalid free of JFS_IP(ipimap)->i_imap in diUnmount
FS: JFS: (trivial) Fix grammatical error in extAlloc
fs/jfs: prevent double-free in dbUnmount() after failed jfs_remount()
Pull ext4 updates from Ted Ts'o:
"Many ext4 and jbd2 cleanups and bug fixes:
- Cleanups in the ext4 remount code when going to and from read-only
- Cleanups in ext4's multiblock allocator
- Cleanups in the jbd2 setup/mounting code paths
- Performance improvements when appending to a delayed allocation file
- Miscellaneous syzbot and other bug fixes"
* tag 'ext4_for_linus-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (60 commits)
ext4: fix slab-use-after-free in ext4_es_insert_extent()
libfs: remove redundant checks of s_encoding
ext4: remove redundant checks of s_encoding
ext4: reject casefold inode flag without casefold feature
ext4: use LIST_HEAD() to initialize the list_head in mballoc.c
ext4: do not mark inode dirty every time when appending using delalloc
ext4: rename s_error_work to s_sb_upd_work
ext4: add periodic superblock update check
ext4: drop dio overwrite only flag and associated warning
ext4: add correct group descriptors and reserved GDT blocks to system zone
ext4: remove unused function declaration
ext4: mballoc: avoid garbage value from err
ext4: use sbi instead of EXT4_SB(sb) in ext4_mb_new_blocks_simple()
ext4: change the type of blocksize in ext4_mb_init_cache()
ext4: fix unttached inode after power cut with orphan file feature enabled
jbd2: correct the end of the journal recovery scan range
ext4: ext4_get_{dev}_journal return proper error value
ext4: cleanup ext4_get_dev_journal() and ext4_get_journal()
jbd2: jbd2_journal_init_{dev,inode} return proper error return value
jbd2: drop useless error tag in jbd2_journal_wipe()
...
Pull dlm updates from David Teigland:
- Allow blocking posix lock requests to be interrupted while waiting.
This requires a cancel request to be sent to the userspace daemon
where posix lock requests are processed across the cluster.
- Fix a posix lock patch from the previous cycle in which lock requests
from different file systems could be mixed up.
- Fix some long standing problems with nfs posix lock cancelation.
- Add a new debugfs file for printing queued callbacks.
- Stop modifying buffers that have been used to receive a message.
- Misc cleanups and some refactoring.
* tag 'dlm-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
dlm: fix plock lookup when using multiple lockspaces
fs: dlm: don't use RCOM_NAMES for version detection
fs: dlm: create midcomms nodes when configure
fs: dlm: constify receive buffer
fs: dlm: drop rxbuf manipulation in dlm_recover_master_copy
fs: dlm: drop rxbuf manipulation in dlm_copy_master_names
fs: dlm: get recovery sequence number as parameter
fs: dlm: cleanup lock order
fs: dlm: remove clear_members_cb
fs: dlm: add plock dev tracepoints
fs: dlm: check on plock ops when exit dlm
fs: dlm: debugfs for queued callbacks
fs: dlm: remove unused processed_nodes
fs: dlm: add missing spin_unlock
fs: dlm: fix F_CANCELLK to cancel pending request
fs: dlm: allow to F_SETLKW getting interrupted
fs: dlm: remove twice newline
Pull more superblock follow-on fixes from Christian Brauner:
"This contains two more small follow-up fixes for the super work this
cycle. I went through all filesystems once more and detected two minor
issues that still needed fixing:
- Some filesystems support mtd devices (e.g., mount -t jffs2 mtd2
/mnt). The mtd infrastructure uses the sb->s_mtd pointer to find an
existing superblock. When the mtd device is put and sb->s_mtd
cleared the superblock can still be found fs_supers and so this
risks a use-after-free.
Add a small patch that aligns mtd with what we did for regular
block devices and switch keying to rely on sb->s_dev.
(This was tested with mtd devices and jffs2 as xfstests doesn't
support mtd devices.)
- Switch nfs back to rely on kill_anon_super() so the superblock is
removed from the list of active supers before sb->s_fs_info is
freed"
* tag 'v6.6-vfs.super.fixes.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
NFS: switch back to using kill_anon_super
mtd: key superblock by device number
fs: export sget_dev()
Commit 1756ddea69 ("pstore: Remove worst-case compression size logic")
removed some clunky per-algorithm worst case size estimation routines on
the basis that we can always store pstore records uncompressed, and
these worst case estimations are about how much the size might
inadvertently *increase* due to encapsulation overhead when the input
cannot be compressed at all. So if compression results in a size
increase, we just store the original data instead.
However, it seems that the original code was misinterpreting these
calculations as an estimation of how much uncompressed data might fit
into a compressed buffer of a given size, and it was using the results
to consume the input data in larger chunks than the pstore record size,
relying on the compression to ensure that what ultimately gets stored
fits into the available space.
One result of this, as observed and reported by Linus, is that upgrading
to a newer kernel that includes the given commit may result in pstore
decompression errors reported in the kernel log. This is due to the fact
that the existing records may unexpectedly decompress to a size that is
larger than the pstore record size.
Another potential problem caused by this change is that we may
underutilize the fixed sized records on pstore backends such as ramoops.
And on pstore backends with variable sized records such as EFI, we will
end up creating many more entries than before to store the same amount
of compressed data.
So let's fix both issues, by bringing back the typical case estimation of
how much ASCII text captured from the dmesg log might fit into a pstore
record of a given size after compression. The original implementation
used the computation given below for zlib:
switch (size) {
/* buffer range for efivars */
case 1000 ... 2000:
cmpr = 56;
break;
case 2001 ... 3000:
cmpr = 54;
break;
case 3001 ... 3999:
cmpr = 52;
break;
/* buffer range for nvram, erst */
case 4000 ... 10000:
cmpr = 45;
break;
default:
cmpr = 60;
break;
}
return (size * 100) / cmpr;
We will use the previous worst-case of 60% for compression. For
decompression go extra large (3x) so we make sure there's enough space
for anything.
While at it, rate limit the error message so we don't flood the log
unnecessarily on systems that have accumulated a lot of pstore history.
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20230830212238.135900-1-ardb@kernel.org
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Pull x86 shadow stack support from Dave Hansen:
"This is the long awaited x86 shadow stack support, part of Intel's
Control-flow Enforcement Technology (CET).
CET consists of two related security features: shadow stacks and
indirect branch tracking. This series implements just the shadow stack
part of this feature, and just for userspace.
The main use case for shadow stack is providing protection against
return oriented programming attacks. It works by maintaining a
secondary (shadow) stack using a special memory type that has
protections against modification. When executing a CALL instruction,
the processor pushes the return address to both the normal stack and
to the special permission shadow stack. Upon RET, the processor pops
the shadow stack copy and compares it to the normal stack copy.
For more information, refer to the links below for the earlier
versions of this patch set"
Link: https://lore.kernel.org/lkml/20220130211838.8382-1-rick.p.edgecombe@intel.com/
Link: https://lore.kernel.org/lkml/20230613001108.3040476-1-rick.p.edgecombe@intel.com/
* tag 'x86_shstk_for_6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (47 commits)
x86/shstk: Change order of __user in type
x86/ibt: Convert IBT selftest to asm
x86/shstk: Don't retry vm_munmap() on -EINTR
x86/kbuild: Fix Documentation/ reference
x86/shstk: Move arch detail comment out of core mm
x86/shstk: Add ARCH_SHSTK_STATUS
x86/shstk: Add ARCH_SHSTK_UNLOCK
x86: Add PTRACE interface for shadow stack
selftests/x86: Add shadow stack test
x86/cpufeatures: Enable CET CR4 bit for shadow stack
x86/shstk: Wire in shadow stack interface
x86: Expose thread features in /proc/$PID/status
x86/shstk: Support WRSS for userspace
x86/shstk: Introduce map_shadow_stack syscall
x86/shstk: Check that signal frame is shadow stack mem
x86/shstk: Check that SSP is aligned on sigreturn
x86/shstk: Handle signals for shadow stack
x86/shstk: Introduce routines modifying shstk
x86/shstk: Handle thread shadow stack
x86/shstk: Add user-mode shadow stack support
...
NLS_UCS2_UTILS is an option selected by filesystems that need it,
don't expose it to users.
Fixes: 089f7f5913 ("fs/smb: Swing unicode common code from smb->NLS")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently with directory leases we cache directory contents for a fixed period
of time (default 30 seconds) but for many workloads this is too short. Allow
configuring the maximum amount of time directory entries are cached when a
directory lease is held on that directory. Add module load parm "max_dir_cache"
For example to set the timeout to 10 minutes you would do:
echo 600 > /sys/module/cifs/parameters/dir_cache_timeout
or to disable caching directory contents:
echo 0 > /sys/module/cifs/parameters/dir_cache_timeout
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
