Fbtest contains some very simple validation of the fbdev userspace API
contract. When used with shmob-drm, it reports the following warnings
and errors:
height changed from 68 to 0
height was rounded down
width changed from 111 to 0
width was rounded down
accel_flags changed from 0 to 1
The first part happens because __fill_var() resets the physical
dimensions of the first connector, as filled in by drm_setup_crtcs_fb().
Fix this by retaining the original values.
The last part happens because __fill_var() forces the FB_ACCELF_TEXT
flag on, while fbtest disables all acceleration on purpose, so it can
draw safely to the frame buffer. Fix this by setting accel_flags to
zero, as DRM does not implement any text console acceleration.
Note that this issue can also be seen in the output of fbset, which
reports "accel true".
Fixes: ee4cce0a8f ("drm/fb-helper: fix input validation gaps in check_var")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Sui Jingfeng <suijingfeng@loongson.cn>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/57e6b334dae8148b1b8ae6ef308ce9a83810a850.1684854344.git.geert+renesas@glider.be
Fixes compilation issues with older GCC versions and Clang after
changes introduced in commit 6810bb3902 ("drm/panel: Add Samsung
S6D7AA0 panel controller driver"). Tested with GCC 13.1.1, GCC 6.4.0
and Clang 16.0.3.
Fixes the following errors with Clang:
drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c:312:14: error: initializer element is not a compile-time constant
.drm_mode = s6d7aa0_lsl080al02_mode,
^~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c:415:14: error: initializer element is not a compile-time constant
.drm_mode = s6d7aa0_lsl080al03_mode,
^~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c:443:14: error: initializer element is not a compile-time constant
.drm_mode = s6d7aa0_ltl101at01_mode,
^~~~~~~~~~~~~~~~~~~~~~~
3 errors generated.
Fixes the following errors with GCC:
drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c:312:14: error: initializer element is not constant
.drm_mode = s6d7aa0_lsl080al02_mode,
^~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c:312:14: note: (near initialization for 's6d7aa0_lsl080al02_desc.drm_mode')
drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c:415:14: error: initializer element is not constant
.drm_mode = s6d7aa0_lsl080al03_mode,
^~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c:415:14: note: (near initialization for 's6d7aa0_lsl080al03_desc.drm_mode')
drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c:443:14: error: initializer element is not constant
.drm_mode = s6d7aa0_ltl101at01_mode,
^~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c:443:14: note: (near initialization for 's6d7aa0_ltl101at01_desc.drm_mode')
Reported-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/lkml/20230523180212.GA1401867@dev-arch.thelio-3990X
Reported-by: kernelci.org bot <bot@kernelci.org>
Link: https://lore.kernel.org/llvm/646c6def.a70a0220.58c1a.903d@mx.google.com
Fixes: 6810bb3902 ("drm/panel: Add Samsung S6D7AA0 panel controller driver")
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230524084324.11840-1-aweber.kernel@gmail.com
During probe, the driver registers i2c dummy devices and populates the
aux bus, which registers a device for the panel. After doing that, the
driver can still defer probe if needed. This ordering of operations is
troublesome however, because the deferred probe work will retry probing
all pending devices every time a new device is registered. Therefore, if
modules need to be loaded in order to satisfy the dependencies for this
driver to complete probe, the kernel will stall, since it'll keep trying
to probe the anx7625 driver, but never succeed, given that modules would
only be loaded after the deferred probe work completes.
Two changes are required to avoid this issue:
* Move of_find_mipi_dsi_host_by_node(), which can defer probe, to before
anx7625_register_i2c_dummy_clients() and
devm_of_dp_aux_populate_ep_devices(), which register devices.
* Make use of the done_probing callback when populating the aux bus,
so that the bridge registration is only done after the panel is
probed. This is required because the panel might need to defer probe,
but the aux bus population needs the i2c dummy devices working, so
this call couldn't just be moved to an earlier point in probe.
One caveat is that if the panel is described outside the aux bus, the
probe loop issue can still happen, but we don't have a way to avoid
it in that case since there's no callback available.
With this patch applied, it's possible to boot on
mt8192-asurada-spherion with
CONFIG_DRM_ANALOGIX_ANX7625=y
CONFIG_MTK_MMSYS=m
CONFIG_BACKLIGHT_PWM=y
and also with
CONFIG_DRM_ANALOGIX_ANX7625=y
CONFIG_MTK_MMSYS=y
CONFIG_BACKLIGHT_PWM=m
Fixes: adca62ec37 ("drm/bridge: anx7625: Support reading edid through aux channel")
Fixes: 269332997a ("drm/bridge: anx7625: Return -EPROBE_DEFER if the dsi host was not found")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230518193902.891121-1-nfraprado@collabora.com
The fbdev framebuffer is in system memory. Store the address in
the field 'screen_buffer'. Fixes the following sparse warning.
../drivers/gpu/drm/msm/msm_fbdev.c:124:26: warning: incorrect type in assignment (different address spaces)
../drivers/gpu/drm/msm/msm_fbdev.c:124:26: expected char [noderef] __iomem *screen_base
../drivers/gpu/drm/msm/msm_fbdev.c:124:26: got void *
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230522191701.13406-1-tzimmermann@suse.de
The fbdev framebuffer is I/O memory, so clear it with fb_memset_io().
Fixes the following sparse warning:
../drivers/gpu/drm/gma500/fbdev.c:234:20: warning: incorrect type in argument 1 (different address spaces)
../drivers/gpu/drm/gma500/fbdev.c:234:20: expected void *s
../drivers/gpu/drm/gma500/fbdev.c:234:20: got char [noderef] __iomem *screen_base
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230522190637.7039-1-tzimmermann@suse.de
The design is to keep Buffer Object's caching policy immutable through
out its life cycle. This patch ends the support for set caching ioctl
from MTL onward. While doing that we also set BO's to be 1-way coherent
at creation time because GPU is no longer automatically snooping CPU
cache. For userspace components needing to fine tune the caching policy
for BO's, a follow up patch will extend the GEM_CREATE uAPI to allow
them specify caching mode at BO creation time.
Signed-off-by: Fei Yang <fei.yang@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230519051103.3404990-2-fei.yang@intel.com
Reserve some bits in the counter config namespace which will carry the
tile id and prepare the code to handle this.
No per tile counters have been added yet.
v2:
- Fix checkpatch issues
- Use 4 bits for gt id in non-engine counters. Drop FIXME.
- Set MAX GTs to 4. Drop FIXME.
v3: (Ashutosh, Tvrtko)
- Drop BUG_ON that would never fire
- Make enable u64
- Pull in some code from next patch
v4: Set I915_PMU_MAX_GTS to 2 (Tvrtko)
v5: s/u64/u32 where needed (Ashutosh)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230519154946.3751971-7-umesh.nerlige.ramappa@intel.com
For a bigjoiner configuration display->crtc_disable() will be called
first for the slave CRTCs and then for the master CRTC. However slave
CRTCs will be actually disabled only after the master CRTC is disabled
(from the encoder disable hooks called with the master CRTC state).
Hence the slave PIPEDMCs can be disabled only after the master CRTC is
disabled, make this so.
intel_encoders_post_pll_disable() must be called only for the master
CRTC, as for the other two encoder disable hooks. While at it fix this
up as well. This didn't cause a problem, since
intel_encoders_post_pll_disable() will call the corresponding hook only
for an encoder/connector connected to the given CRTC, however slave
CRTCs will have no associated encoder/connector.
Fixes: 3af2ff0840 ("drm/i915: Enable a PIPEDMC whenever its corresponding pipe is enabled")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230510103131.1618266-2-imre.deak@intel.com
(cherry picked from commit 7eeef32719)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Implement support for DSI clock and data lane DN/DP polarity swap by
means of decoding 'lane-polarities' DT property. The controller does
support DN/DP swap of clock lane and all data lanes, the controller
does not support polarity swap of individual data lane bundles, add
a check which verifies all data lanes have the same polarity.
This has been validated on an imx8mm board that actually has the MIPI DSI
clock lanes inverted.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230514114625.98372-2-festevam@gmail.com
In mutex_init() lockdep identifies a lock by defining a special static
key for each lock class. However if we wrap the macro in a function,
like in drmm_mutex_init(), we end up generating:
int drmm_mutex_init(struct drm_device *dev, struct mutex *lock)
{
static struct lock_class_key __key;
__mutex_init((lock), "lock", &__key);
....
}
The static __key here is what lockdep uses to identify the lock class,
however since this is just a normal function the key here will be
created once, where all callers then use the same key. In effect the
mutex->depmap.key will be the same pointer for different
drmm_mutex_init() callers. This then results in impossible lockdep
splats since lockdep thinks completely unrelated locks are the same lock
class.
To fix this turn drmm_mutex_init() into a macro such that it generates a
different "static struct lock_class_key __key" for each invocation,
which looks to be inline with what mutex_init() wants.
v2:
- Revamp the commit message with clearer explanation of the issue.
- Rather export __drmm_mutex_release() than static inline.
Reported-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reported-by: Sarah Walker <sarah.walker@imgtec.com>
Fixes: e13f13e039 ("drm: Add DRM-managed mutex_init()")
Cc: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230519090733.489019-1-matthew.auld@intel.com
Since hardware revision 5.0.0 the TE configuration moved out of the
PINGPONG block into the INTF block. Writing these registers has no
effect, and is omitted downstream via the DPU/SDE_PINGPONG_TE feature
flag. This flag is only added to PINGPONG blocks used by hardware prior
to 5.0.0.
The existing PP_BLK_TE macro has been removed in favour of directly
passing this feature flag, which has thus far been the only difference
with PP_BLK. PP_BLK_DITHER has been left in place as its embedded
feature flag already excludes this DPU_PINGPONG_TE bit and differs by
setting the block length to zero, as it only contains a DITHER subblock.
The code that writes to these registers in the INTF block will follow in
subsequent patches.
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/534240/
Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-14-27ce1a5ab5c6@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
This autorefresh disable logic in the physical command-mode encoder
consumes three callbacks to the pingpong block, and will explode in
unnecessary complexity when the same callbacks need to be called on the
interface block instead to accommodate INTF TE support. To clean this
up, move the logic into the pingpong block under a disable_autorefresh
callback, replacing the aforementioned three get_autorefresh,
setup_autorefresh and get_vsync_info callbacks.
The same logic will have to be replicated to the interface block when it
receives INTF TE support, but it is less complex than constantly
switching on a "has_intf_te" boolean to choose a callback.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/534230/
Link: https://lore.kernel.org/r/20230411-dpu-intf-te-v4-13-27ce1a5ab5c6@somainline.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
