Fix circular locking dependency on runtime suspend.
<4> [74.952215] ======================================================
<4> [74.952217] WARNING: possible circular locking dependency detected
<4> [74.952219] 6.10.0-rc7-xe #1 Not tainted
<4> [74.952221] ------------------------------------------------------
<4> [74.952223] kworker/7:1/82 is trying to acquire lock:
<4> [74.952226] ffff888120548488 (&dev->mode_config.mutex){+.+.}-{3:3}, at: drm_modeset_lock_all+0x40/0x1e0 [drm]
<4> [74.952260]
but task is already holding lock:
<4> [74.952262] ffffffffa0ae59c0 (xe_pm_runtime_lockdep_map){+.+.}-{0:0}, at: xe_pm_runtime_suspend+0x2f/0x340 [xe]
<4> [74.952322]
which lock already depends on the new lock.
The commit 'b1d90a86 ("drm/xe: Use the encoder suspend helper also used
by the i915 driver")' didn't do anything wrong. It actually fixed a
critical bug, because the encoder_suspend was never getting actually
called because it was returning if (has_display(xe)) instead of
if (!has_display(xe)). However, this ended up introducing the encoder
suspend calls in the runtime routines as well, causing the circular
locking dependency.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/2304
Fixes: b1d90a862c ("drm/xe: Use the encoder suspend helper also used by the i915 driver")
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240830183507.298351-2-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cross-driver (xe-core) Changes:
- Require BMG scanout buffers to be 64k physically aligned (Maarten)
Core (drm) Changes:
- Introducing Xe2 ccs modifiers for integrated and discrete graphics (Juha-Pekka)
Driver Changes:
- General cleanup and more work moving towards intel_display isolation (Jani)
- New display workaround (Suraj)
- Use correct cp_irq_count on HDCP (Suraj)
- eDP PSR fix when CRC is enabled (Jouni)
- Fix DP MST state after a sink reset (Imre)
- Fix Arrow Lake GSC firmware version (John)
- Use chained DSBs for LUT programming (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZtCC0lJ0Zf3MoSdW@intel.com
UAPI Changes:
- Fix OA format masks which were breaking build with gcc-5
Cross-subsystem Changes:
Driver Changes:
- Use dma_fence_chain_free in chain fence unused as a sync (Matthew Brost)
- Refactor hw engine lookup and mmio access to be used in more places
(Dominik, Matt Auld, Mika Kuoppala)
- Enable priority mem read for Xe2 and later (Pallavi Mishra)
- Fix PL1 disable flow in xe_hwmon_power_max_write (Karthik)
- Fix refcount and speedup devcoredump (Matthew Brost)
- Add performance tuning changes to Xe2 (Akshata, Shekhar)
- Fix OA sysfs entry (Ashutosh)
- Add first GuC firmware support for BMG (Julia)
- Bump minimum GuC firmware for platforms under force_probe to match LNL
and BMG (Julia)
- Fix access check on user fence creation (Nirmoy)
- Add/document workarounds for Xe2 (Julia, Daniele, John, Tejas)
- Document workaround and use proper WA infra (Matt Roper)
- Fix VF configuration on media GT (Michal Wajdeczko)
- Fix VM dma-resv lock (Matthew Brost)
- Allow suspend/resume exec queue backend op to be called multiple times
(Matthew Brost)
- Add GT stats to debugfs (Nirmoy)
- Add hwconfig to debugfs (Matt Roper)
- Compile out all debugfs code with ONFIG_DEUBG_FS=n (Lucas)
- Remove dead kunit code (Jani Nikula)
- Refactor drvdata storing to help display (Jani Nikula)
- Cleanup unsused xe parameter in pte handling (Himal)
- Rename s/enable_display/probe_display/ for clarity (Lucas)
- Fix missing MCR annotation in couple of registers (Tejas)
- Fix DGFX display suspend/resume (Maarten)
- Prepare exec_queue_kill for PXP handling (Daniele)
- Fix devm/drmm issues (Daniele, Matthew Brost)
- Fix tile and ggtt fini sequences (Matthew Brost)
- Fix crashes when probing without firmware in place (Daniele, Matthew Brost)
- Use xe_managed for kernel BOs (Daniele, Matthew Brost)
- Future-proof dss_per_group calculation by using hwconfig (Matt Roper)
- Use reserved copy engine for user binds on faulting devices
(Matthew Brost)
- Allow mixing dma-fence jobs and long-running faulting jobs (Francois)
- Cleanup redundant arg when creating use BO (Nirmoy)
- Prevent UAF around preempt fence (Auld)
- Fix display suspend/resume (Maarten)
- Use vma_pages() helper (Thorsten)
- Calculate pagefault queue size (Stuart, Matthew Auld)
- Fix missing pagefault wq destroy (Stuart)
- Fix lifetime handling of HW fence ctx (Matthew Brost)
- Fix order destroy order for jobs (Matthew Brost)
- Fix TLB invalidation for media GT (Matthew Brost)
- Document GGTT (Rodrigo Vivi)
- Refactor GGTT layering and fix runtime outer protection (Rodrigo Vivi)
- Handle HPD polling on display pm runtime suspend/resume (Imre, Vinod)
- Drop unrequired NULL checks (Apoorva, Himal)
- Use separate rpm lockdep map for non-d3cold-capable devices (Thomas Hellström)
- Support "nomodeset" kernel command-line option (Thomas Zimmermann)
- Drop force_probe requirement for LNL and BMG (Lucas, Balasubramani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/wd42jsh4i3q5zlrmi2cljejohdsrqc6hvtxf76lbxsp3ibrgmz@y54fa7wwxgsd
For CCS formats on affected platforms, CCS can be used freely, but
display engine requires a multiple of 64k physical pages. No other
changes are needed.
At the BO creation time we don't know if the BO will be used for CCS
or not. If the scanout flag is set, and the BO is a multiple of 64k,
we take the safe route and force the physical alignment of 64k pages.
If the BO is not a multiple of 64k, or the scanout flag was not set
at BO creation, we reject it for usage as CCS in display. The physical
pages are likely not aligned correctly, and this will cause corruption
when used as FB.
The scanout flag and size being a multiple of 64k are used together
to enforce 64k physical placement.
VM_BIND is completely unaffected, mappings to a VM can still be aligned
to 4k, just like for normal buffers.
Signed-off-by: Zbigniew Kempczyński <zbigniew.kempczynski@intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Juha-Pekka Heikkilä <juha-pekka.heikkila@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240826170117.327709-3-maarten.lankhorst@linux.intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
amdgpu pr conconflicts due to patches cherry-picked to -fixes, I might
as well catch up with a backmerge and handle them all. Plus both misc
and intel maintainers asked for a backmerge anyway.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
In XE, display runtime suspend / resume routines are called only
if d3cold is allowed. This makes the driver unable to detect any
HPDs once the device goes into runtime suspend state in platforms
like LNL. Update the display runtime suspend / resume routines
to include HPD polling regardless of d3cold status.
While xe_display_pm_suspend/resume() performs steps during runtime
suspend/resume that shouldn't happen, like suspending MST and they
are missing other steps like enabling DC9, this patchset is meant
to keep the current behavior wrt. these, leaving the corresponding
updates for a follow-up
v2: have a separate function for display runtime s/r (Rodrigo)
v3: better streamlining of system s/r and runtime s/r calls (Imre)
v4: rebased
Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240823112148.327015-4-vinod.govindapillai@intel.com
In some rare cases, the drm_mm node cannot be removed synchronously
due to runtime PM conditions. In this situation, the node removal will
be delegated to a workqueue that will be able to wake up the device
before removing the node.
However, in this situation, the lifetime of the xe_ggtt_node cannot
be restricted to the lifetime of the parent object. So, this patch
introduces the infrastructure so the xe_ggtt_node struct can be
allocated in advance and freed when needed.
By having the ggtt backpointer, it also ensure that the init function
is always called before any attempt to insert or reserve the node
in the GGTT.
v2: s/xe_ggtt_node_force_fini/xe_ggtt_node_fini and use it
internaly (Brost)
v3: - Use GF_NOFS for node allocation (CI)
- Avoid ggtt argument, now that we have it inside the node (Lucas)
- Fix some missed fini cases (CI)
v4: - Fix SRIOV critical case where config->ggtt_region was
lost (Michal)
- Avoid ggtt argument also on removal (missed case on v3) (Michal)
- Remove useless checks (Michal)
- Return 0 instead of negative errno on a u32 addr. (Michal)
- s/xe_ggtt_assign/xe_ggtt_node_assign for coherence, while we
are touching it (Michal)
v5: - Fix VFs' ggtt_balloon
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240821193842.352557-11-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The xe_ggtt component uses drm_mm to manage the GGTT.
The drm_mm_node is just a node inside drm_mm, but in Xe we use that
only in the GGTT context. So, this patch encapsulates the drm_mm_node
into a xe_ggtt's new struct.
This is the first step towards limiting all the drm_mm access
through xe_ggtt. The ultimate goal is to have a better control of
the node insertion and removal, so the removal can be delegated
to a delayed workqueue.
v2: Fix includes and typos (Michal and Brost)
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240821193842.352557-5-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Get drm-xe-next on v6.11-rc2 and synchronized with drm-intel-next for
the display side. This resolves the current conflict for the
enable_display module parameter and allows further pending refactors.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The different approach used by xe regarding the initialization of
display HW has been proved a great addition for early driver bring up:
core xe can be tested without having all the bits sorted out on the
display side.
On the other hand, the approach exposed by i915-display is to *actively*
disable the display by programming it if needed, i.e. if it was left
enabled by firmware. It also has its use to make sure the HW is actually
disabled and not wasting power.
However having both the way it is in xe doesn't expose a good interface
wrt module params. From modinfo:
disable_display:Disable display (default: false) (bool)
enable_display:Enable display (bool)
Rename enable_display to probe_display to try to convey the message that
the HW is being touched and improve the module param description. To
avoid confusion, the enable_display is renamed everywhere, not only in
the module param. New description for the parameters:
disable_display:Disable display (default: false) (bool)
probe_display:Probe display HW, otherwise it's left untouched (default: true) (bool)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240813141931.3141395-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
drm-xe-next for 6.12
UAPI Changes:
- Rename xe perf layer as xe observation layer, but was
also made available via fixes to previous verison (Ashutosh)
- Use write-back caching mode for system memory on DGFX,
but was also mad available via fixes to previous version (Thomas)
- Expose SIMD16 EU mask in topology query for userspace to know
the type of EU, as available in PVC, Lunar Lake and Battlemage
(Lucas)
- Return ENOBUFS instead of ENOMEM in vm_bind if failure is tied
to an array of binds (Matthew Brost)
Driver Changes:
- Log cleanup moving messages to debug priority (Michal Wajdeczko)
- Add timeout to fences to adhere to dma_buf rules (Matthew Brost)
- Rename old engine nomenclature to exec_queue (Matthew Brost)
- Convert multiple bind ops to 1 job (Matthew Brost)
- Add error injection for vm bind to help testing error path
(Matthew Brost)
- Fix error handling in page table to propagate correctly
to userspace (Matthew Brost)
- Re-organize and cleanup SR-IOV related registers (Michal Wajdeczko)
- Make the device write barrier compatible with VF (Michal Wajdeczko)
- New display workarounds for Battlemage (Matthew Auld)
- New media workarounds for Lunar Lake and Battlemage (Ngai-Mint Kwan)
- New graphics workarounds for Lunar Lake (Bommu Krishnaiah)
- Tracepoint updates (Matthew Brost, Nirmoy Das)
- Cleanup the header generation for OOB workarounds (Lucas De Marchi)
- Fix leaking HDCP-related object (Nirmoy Das)
- Serialize L2 flushes to avoid races (Tejas Upadhyay)
- Log pid and comm on job timeout (José Roberto de Souza)
- Simplify boilerplate code for live kunit (Michal Wajdeczko)
- Improve kunit skips for live kunit (Michal Wajdeczko)
- Fix xe_sync cleanup when handling xe_exec ioctl (Ashutosh Dixit)
- Limit fair VF LMEM provisioning (Michal Wajdeczko)
- New workaround to fence mmio writes in Lunar Lake (Tejas Upadhyay)
- Warn on writes inaccessible register in VF (Michal Wajdeczko)
- Fix register lookup in VF (Michal Wajdeczko)
- Add GSC support for Battlemage (Alexander Usyskin)
- Fix wedging only the GT in which timeout occurred (Matthew Brost)
- Block device suspend when wedging (Matthew Brost)
- Handle compression and migration changes for Battlemage
(Akshata Jahagirdar)
- Limit access of stolen memory for Lunar Lake (Uma Shankar)
- Fail invalid addresses during user fence creation (Matthew Brost)
- Refcount xe_file to safely and accurately store fdinfo stats
(Umesh Nerlige Ramappa)
- Cleanup and fix PM reference for TLB invalidation code
(Matthew Brost)
- Fix PM reference handling when communicating with GuC (Matthew Brost)
- Add new BO flag for 2 MiB alignement and use in VF (Michal Wajdeczko)
- Simplify MMIO setup for multi-tile platforms (Lucas De Marchi)
- Add check for uninitialized access to OOB workarounds
(Lucas De Marchi)
- New GSC and HuC firmware blobs for Lunar Lake and Battlemage
(Daniele Ceraolo Spurio)
- Unify mmio wait logic (Gustavo Sousa)
- Fix off-by-one when processing RTP rules (Lucas De Marchi)
- Future-proof migrate logic with compressed PAT flag (Matt Roper)
- Add WA kunit tests for Battlemage (Lucas De Marchi)
- Test active tracking for workaorunds with kunit (Lucas De Marchi)
- Add kunit tests for RTP with no actions (Lucas De Marchi)
- Unify parse of OR rules in RTP (Lucas De Marchi)
- Add performance tuning for Battlemage (Sai Teja Pottumuttu)
- Make bit masks unsigned (Geert Uytterhoeven)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/k7xuktfav4zmtxxjr77glu2hszypvzgmzghoumh757nqfnk7kn@ccfi4ts3ytbk
Sync with v6.11-rc1 in general, and specifically get the new
BACKLIGHT_POWER_ constants for power states.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Pull drm updates from Dave Airlie:
"There's a lot of stuff in here, amd, i915 and xe have new platform
work, lots of core rework around EDID handling, some new COMPILE_TEST
options, maintainer changes and a lots of other stuff. Summary:
core:
- deprecate DRM data and return 0 date
- connector: Create a set of helpers to help with HDMI support
- Remove driver owner assignments
- Allow more drivers to compile with COMPILE_TEST
- Conversions to drm_edid
- Sprinkle MODULE_DESCRIPTIONS everywhere they are missing
- Remove drm_mm_replace_node
- print: Add a drm prefix to warn level messages too, remove
___drm_dbg, consolidate prefix handling
- New monochrome TV mode variant
ttm:
- improve number of page faults on some platforms
- fix test builds under PREEMPT_RT
- more test coverage
ci:
- Require a more recent version of mesa
- improve farm setup and test generation
dma-buf:
- warn if reserving 0 fence slots
- internal API heap enhancements
fbdev:
- Create memory manager optimized fbdev emulation
panic:
- Allow to select fonts
- improve drm_fb_dma_get_scanout_buffer
- Allow to dump kmsg to the screen
bridge:
- Remove redundant checks on bridge->encoder
- Remove drm_bridge_chain_mode_fixup
- bridge-connector: Plumb in the new HDMI helper
- analogix_dp: Various improvements, handle AUX transfers timeout
- samsung-dsim: Fix timings calculation
- tc358767: Plenty of small fixes, fix no connector attach, fix
clocks
- sii902x: state validation improvements
panels:
- Switch panels from register table initialization to proper code
- Now that the panel code tracks the panel state, remove every ad-hoc
implementation in the panel drivers
- More cleanup of prepare / enable state tracking in drivers
- edp: Drop legacy panel compatibles
- simple-bridge: Switch to devm_drm_bridge_add
- New panels: Lincoln Tech Sol LCD185-101CT, Microtips Technology
13-101HIEBCAF0-C, Microtips Technology MF-103HIEB0GA0,
BOE nv110wum-l60, IVO t109nw41, WL-355608-A8, PrimeView
PM070WL4, Lincoln Technologies LCD197, Ortustech
COM35H3P70ULC, AUO G104STN01, K&d kd101ne3-40ti
amdgpu:
- DCN 4.0.x support
- GC 12.0 support
- GMC 12.0 support
- SDMA 7.0 support
- MES12 support
- MMHUB 4.1 support
- GFX12 modifier and DCC support
- lots of IP fixes/updates
amdkfd:
- Contiguous VRAM allocations
- GC 12.0 support
- SDMA 7.0 support
- SR-IOV fixes
- KFD GFX ALU exceptions
i915:
- Battlemage Xe2 HPD display enablement
- Panel Replay enabling
- DP AUX-less ALPM/LOBF
- Enable link training failure fallback for DP MST links
- CMRR (Content Match Refresh Rate) enabling
- Increase ADL-S/ADL-P/DG2+ max TMDS bitrate to 6 Gbps
- Enable eDP AUX based HDR backlight
- Support replaying GPU hangs with captured context image
- Automate CCS Mode setting during engine resets
- lots of refactoring
- Support replaying GPU hangs with captured context image
- Increase FLR timeout from 3s to 9s
- Enable w/a 16021333562 for DG2, MTL and ARL [guc]
xe:
- update MAINATINERS
- New uapi adding OA functionality to Xe
- expose l3 bank mask
- fix display detect on ADL-N
- runtime PM Fixes
- Fix silent backmerge issues
- More prep for SR-IOV
- HWmon additions
- per client usage info
- Rework GPU page fault handling
- Drop EXEC_QUEUE_FLAG_BANNED
- Add BMG PCI IDs
- Scheduler fixes and improvements
- Rename xe_exec_queue::compute to xe_exec_queue::lr
- Use ttm_uncached for BO with NEEDS_UC flag
- Rename xe perf layer as xe observation layer
- lots of refactoring
radeon:
- Backlight workaround for iMac
- Silence UBSAN flex array warnings
msm:
- Validate registers XML description against schema in CI
- core/dpu: SM7150 support
- mdp5: Add support for MSM8937
- gpu: Add param for userspace to know if raytracing is supported
- gpu: X185 support (aka gpu in X1 laptop chips)
- gpu: a505 support
ivpu:
- hardware scheduler support
- profiling support
- improvements to the platform support layer
- firmware handling improvements
- clocks/power mgmt improvements
- scheduler/logging improvements
habanalabs:
- Gradual sleep in polling memory macro
- Reduce Gaudi2 MSI-X interrupt count to 128
- Add Gaudi2-D revision support
- Add timestamp to CPLD info
- Gaudi2: Assume hard-reset by firmware upon MC SEI severe error
- Align Gaudi2 interrupt names
- Check for errors after preboot is ready
- Change habanalabs maintainer and git repo path
mgag200:
- refactoring and improvements
- Add BMC output
- enable polling
nouveau:
- add registry command line
v3d:
- perf counters improvements
zynqmp:
- irq and debugfs improvements
atmel-hlcdc:
- Support XLCDC in sam9x7
mipi-dbi:
- Remove mipi_dbi_machine_little_endian
- make SPI bits per word configurable
- support RGB888
- allow pixel formats to be specified in the DT
sun4i:
- Rework the blender setup for DE2
panfrost:
- Enable MT8188 support
vc4:
- Monochrome TV support
exynos:
- fix fallback mode regression
- fix memory leak
- Use drm_edid_duplicate() instead of kmemdup()
etnaviv:
- fix i.MX8MP NPU clock gating
- workaround FE register cdc issues on some cores
- fix DMA sync handling for cached buffers
- fix job timeout handling
- keep TS enabled on MMUv2 cores for improved performance
mediatek:
- Convert to platform remove callback returning void-
- Drop chain_mode_fixup call in mode_valid()
- Fixes the errors of MediaTek display driver found by IGT
- Add display support for the MT8365-EVK board
- Fix bit depth overwritten for mtk_ovl_set bit_depth()
- Fix possible_crtcs calculation
- Fix spurious kfree()
ast:
- refactor mode setting code
stm:
- Add LVDS support
- DSI PHY updates"
* tag 'drm-next-2024-07-18' of https://gitlab.freedesktop.org/drm/kernel: (2501 commits)
drm/amdgpu/mes12: add missing opcode string
drm/amdgpu/mes11: update opcode strings
Revert "drm/amd/display: Reset freesync config before update new state"
drm/omap: Restrict compile testing to PAGE_SIZE less than 64KB
drm/xe: Drop trace_xe_hw_fence_free
drm/xe/uapi: Rename xe perf layer as xe observation layer
drm/amdgpu: remove exp hw support check for gfx12
drm/amdgpu: timely save bad pages to eeprom after gpu ras reset is completed
drm/amdgpu: flush all cached ras bad pages to eeprom
drm/amdgpu: select compute ME engines dynamically
drm/amd/display: Allow display DCC for DCN401
drm/amdgpu: select compute ME engines dynamically
drm/amdgpu/job: Replace DRM_INFO/ERROR logging
drm/amdgpu: select compute ME engines dynamically
drm/amd/pm: Ignore initial value in smu response register
drm/amdgpu: Initialize VF partition mode
drm/amd/amdgpu: fix SDMA IRQ client ID <-> req mapping
MAINTAINERS: fix Xinhui's name
MAINTAINERS: update powerplay and swsmu
drm/qxl: Pin buffer objects for internal mappings
...
As per recommendation in the workarounds:
WA_22019338487
There is an issue with accessing Stolen memory pages due a
hardware limitation. Limit the usage of stolen memory for
fbdev for LNL+. Don't use BIOS FB from stolen on LNL+ and
assign the same from system memory.
v2: Corrected the WA Number, limited WA to LNL and
Adopted XE_WA framework as suggested by Lucas and Matt.
v3: Introduced the waxxx_display to implement display side
of WA changes on Lunarlake. Used xe_root_mmio_gt and
avoid the for loop (Suggested by Lucas)
v4: Fixed some nits (Luca)
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240717082252.3875909-1-uma.shankar@intel.com
This WA requires us to limit media GT frequency requests to a certain
cap value during driver load. Freq limits are restored after load
completes, so perf will not be affected during normal operations.
During normal driver operation, this WA requires dummy writes to media
offset 0x380D8C after every ~63 GGTT writes. This will ensure completion
of the LMEM writes originating from Gunit.
During driver unload(before FLR), the WA requires that we set requested
frequency to the cap value again.
v3: Do not use WA number in function name. Call WA wrapper from xe_device.
Rename some variables, check for locks in the correct function (Rodrigo).
Ensure reset path is also covered for this WA.
v4: Fix BAT failure
v5: Add a function pointer for ggtt_ops (Michal W)
v6: Fix name collision and use static function (Rodrigo)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240620224928.3986377-2-vinay.belgaumkar@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Different hardware generations have different scanout alignment
requirements. Introduce a new vfunc that will allow us to
make that distinction without horrible if-ladders.
For now we directly plug in the existing intel_surf_alignment()
and intel_cursor_alignment() functions.
For fbdev we (temporarily) introduce intel_fbdev_min_alignment()
that simply queries the alignment from the primary plane of
the first crtc.
TODO: someone will need to fix xe's alignment handling
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240612204712.31404-4-ville.syrjala@linux.intel.com
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Use the suspend encoders helper which is also used by the i915 driver.
This fixes an issue in the xe driver where the encoder
suspend_complete() hook is not called and was an overlook when this hook
was added in commit b61fad5f7e ("drm/i915/tc: Call TypeC port
flush_work/cleanup without modeset locks held") for i915, but not added
to the xe driver (which was still in a separate source tree at the above
point).
v2: Fix checkpatch warn in commit log. (Rodrigo)
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240618125255.4080303-3-imre.deak@intel.com
UAPI Changes:
- Expose the L3 bank mask (Francois)
Cross-subsystem Changes:
- Update Xe driver maintainers (Oded)
Display (i915):
- Add missing include to intel_vga.c (Michal Wajdeczko)
Driver Changes:
- Fix Display (xe-only) detection for ADL-N (Lucas)
- Runtime PM fixes that enabled PC-10 and D3Cold (Francois, Rodrigo)
- Fix unexpected silent drm backmerge issues (Thomas)
- More (a lot more) preparation for SR-IOV support (Michal Wajdeczko)
- Devcoredump fixes and improvements (Jose, Tejas, Matt Brost)
- Introduce device 'wedged' state (Rodrigo)
- Improve debug and info messages (Michal Wajdeczko, Rodrigo, Nirmoy)
- Adding or fixing workarounds (Tejas, Shekhar, Lucas, Bommu)
- Check result of drmm_mutex_init (Michal Wajdeczko)
- Enlarge the critical dma fence area for preempt fences (Matt Auld)
- Prevent UAF in VM's rebind work (Matt Auld)
- GuC submit related clean-ups and fixes (Matt Brost, Himal, Jonathan, Niranjana)
- Prefer local helpers to perform dma reservation locking (Himal)
- Spelling and typo fixes (Colin, Francois)
- Prep patches for 1 job per VM bind IOCTL (no uapi change yet) (Matt Brost)
- Remove uninitialized end var from xe_gt_tlb_invalidation_range (Nirmoy)
- GSC related changes targeting LNL support (Daniele)
- Fix assert in L3 bank mask generation (Francois)
- Perform dma_map when moving system buffer objects to TT (Thomas)
- Add helpers for manipulating macro arguments (Michal Wajdeczko)
- Refactor default device atomic settings (Nirmoy)
- Add debugfs node to dump mocs (Janga)
- Use ordered WQ for G2H handler (Matt Brost)
- Clean up and fixes in header includes (Michal Wajdeczko)
- Prefer flexible-array over deprecated zero-lenght ones (Lucas)
- Add Indirect Ring State support (Niranjana)
- Fix UBSAN shift-out-of-bounds failure (Shuicheng)
- HWMon fixes and additions (Karthik)
- Clean-up refactor around probe init functions (Lucas, Michal Wajdeczko)
- Fix PCODE init function (Himal)
- Only use reserved BCS instances for usm migrate exec queue (Matt Brost)
- Only zap PTEs as needed (Matt Brost)
- Per client usage info (Lucas)
- Core hotunplug improvements converting stuff towards devm (Matt Auld)
- Don't emit false error if running in execlist mode (Michal Wajdeczko)
- Remove unused struct (Dr. David)
- Support/debug for slow GuC loads (John Harrison)
- Decouple job seqno and lrc seqno (Matt Brost)
- Allow migrate vm gpu submissions from reclaim context (Thomas)
- Rename drm-client running time to run_ticks and fix a UAF (Umesh)
- Check empty pinned BO list with lock held (Nirmoy)
- Drop undesired prefix from the platform name (Michal Wajdeczko)
- Remove unwanted mutex locking on xe file close (Niranjana)
- Replace format-less snprintf() with strscpy() (Arnd)
- Other general clean-ups on registers definitions and function names (Michal Wajdeczko)
- Add kernel-doc to some xe_lrc interfaces (Niranajana)
- Use missing lock in relay_needs_worker (Nirmoy)
- Drop redundant W=1 warnings from Makefile (Jani)
- Simplify if condition in preempt fences code (Thorsten)
- Flush engine buffers before signalling user fence on all engines (Andrzej)
- Don't overmap identity VRAM mapping (Matt Brost)
- Do not dereference NULL job->fence in trace points (Matt Brost)
- Add synchronous gt reset debugfs (Jonathan)
- Xe gt_idle fixes (Riana)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZmItmuf7vq_xvRjJ@intel.com
Prepare power-well and DC handling for a full power
lost during D3Cold, then sanitize it upon D3->D0.
Otherwise we get a bunch of state mismatch.
Ideally we could leave DC9 enabled and wouldn't need
to move DC9->DC0 on every runtime resume, however,
the disable_DC is part of the power-well checks and
intrinsic to the dc_off power well. In the future that
can be detangled so we can have even bigger power savings.
But for now, let's focus on getting a D3Cold, which saves
much more power by itself.
v2: create new functions to avoid full-suspend-resume path,
which would result in a deadlock between xe_gem_fault and the
modeset-ioctl.
v3: Only avoid the full modeset to avoid the race, for a more
robust suspend-resume.
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Tested-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240522170105.327472-5-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
