Pull power management updates from Rafael Wysocki:
"As is tradition, cpufreq is the part with the largest number of
updates that include core fixes and cleanups as well as updates of
several assorted drivers, but there are also quite a few updates
related to system sleep, mostly focused on asynchronous suspend and
resume of devices and on making the integration of system suspend
and resume with runtime PM easier.
Runtime PM is also updated to allow some code duplication in drivers
to be eliminated going forward and to work more consistently overall
in some cases.
Apart from that, there are some driver core updates related to PM
domains that should help to address ordering issues with devm_ cleanup
routines relying on PM domains, some assorted devfreq updates
including core fixes and cleanups, tooling updates, and documentation
and MAINTAINERS updates.
Specifics:
- Fix two initialization ordering issues in the cpufreq core and a
governor initialization error path in it, and clean it up (Lifeng
Zheng)
- Add Granite Rapids support in no-HWP mode to the intel_pstate
cpufreq driver (Li RongQing)
- Make intel_pstate always use HWP_DESIRED_PERF when operating in the
passive mode (Rafael Wysocki)
- Allow building the tegra124 cpufreq driver as a module (Aaron
Kling)
- Do minor cleanups for Rust cpufreq and cpumask APIs and fix
MAINTAINERS entry for cpu.rs (Abhinav Ananthu, Ritvik Gupta, Lukas
Bulwahn)
- Clean up assorted cpufreq drivers (Arnd Bergmann, Dan Carpenter,
Krzysztof Kozlowski, Sven Peter, Svyatoslav Ryhel, Lifeng Zheng)
- Add the NEED_UPDATE_LIMITS flag to the CPPC cpufreq driver
(Prashant Malani)
- Fix minimum performance state label error in the amd-pstate driver
documentation (Shouye Liu)
- Add the CPUFREQ_GOV_STRICT_TARGET flag to the userspace cpufreq
governor and explain HW coordination influence on it in the
documentation (Shashank Balaji)
- Fix opencoded for_each_cpu() in idle_state_valid() in the DT
cpuidle driver (Yury Norov)
- Remove info about non-existing QoS interfaces from the PM QoS
documentation (Ulf Hansson)
- Use c_* types via kernel prelude in Rust for OPP (Abhinav Ananthu)
- Add HiSilicon uncore frequency scaling driver to devfreq (Jie Zhan)
- Allow devfreq drivers to add custom sysfs ABIs (Jie Zhan)
- Simplify the sun8i-a33-mbus devfreq driver by using more devm
functions (Uwe Kleine-König)
- Fix an index typo in trans_stat() in devfreq (Chanwoo Choi)
- Check devfreq governor before using governor->name (Lifeng Zheng)
- Remove a redundant devfreq_get_freq_range() call from
devfreq_add_device() (Lifeng Zheng)
- Limit max_freq with scaling_min_freq in devfreq (Lifeng Zheng)
- Replace sscanf() with kstrtoul() in set_freq_store() (Lifeng Zheng)
- Extend the asynchronous suspend and resume of devices to handle
suppliers like parents and consumers like children (Rafael Wysocki)
- Make pm_runtime_force_resume() work for drivers that set the
DPM_FLAG_SMART_SUSPEND flag and allow PCI drivers and drivers that
collaborate with the general ACPI PM domain to set it (Rafael
Wysocki)
- Add kernel parameter to disable asynchronous suspend/resume of
devices (Tudor Ambarus)
- Drop redundant might_sleep() calls from some functions in the
device suspend/resume core code (Zhongqiu Han)
- Fix the handling of monitors connected right before waking up the
system from sleep (tuhaowen)
- Clean up MAINTAINERS entries for suspend and hibernation (Rafael
Wysocki)
- Fix error code path in the KEXEC_JUMP flow and drop a redundant
pm_restore_gfp_mask() call from it (Rafael Wysocki)
- Rearrange suspend/resume error handling in the core device suspend
and resume code (Rafael Wysocki)
- Fix up white space that does not follow coding style in the
hibernation core code (Darshan Rathod)
- Document return values of suspend-related API functions in the
runtime PM framework (Sakari Ailus)
- Mark last busy stamp in multiple autosuspend-related functions in
the runtime PM framework and update its documentation (Sakari
Ailus)
- Take active children into account in pm_runtime_get_if_in_use() for
consistency (Rafael Wysocki)
- Fix NULL pointer dereference in get_pd_power_uw() in the dtpm_cpu
power capping driver (Sivan Zohar-Kotzer)
- Add support for the Bartlett Lake platform to the Intel RAPL power
capping driver (Qiao Wei)
- Add PL4 support for Panther Lake to the intel_rapl_msr power
capping driver (Zhang Rui)
- Update contact information in the PM ABI docs and maintainer
information in the power domains DT binding (Rafael Wysocki)
- Update PM header inclusions to follow the IWYU (Include What You
Use) principle (Andy Shevchenko)
- Add flags to specify power on attach/detach for PM domains, make
the driver core detach PM domains in device_unbind_cleanup(), and
drop the dev_pm_domain_detach() call from the platform bus type
(Claudiu Beznea)
- Improve Python binding's Makefile for cpupower (John B. Wyatt IV)
- Fix printing of CORE, CPU fields in cpupower-monitor (Gautham
Shenoy)"
* tag 'pm-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (75 commits)
cpufreq: CPPC: Mark driver with NEED_UPDATE_LIMITS flag
PM: docs: Use my kernel.org address in ABI docs and DT bindings
PM: hibernate: Fix up white space that does not follow coding style
PM: sleep: Rearrange suspend/resume error handling in the core
Documentation: amd-pstate:fix minimum performance state label error
PM: runtime: Take active children into account in pm_runtime_get_if_in_use()
kexec_core: Drop redundant pm_restore_gfp_mask() call
kexec_core: Fix error code path in the KEXEC_JUMP flow
PM: sleep: Clean up MAINTAINERS entries for suspend and hibernation
drivers: cpufreq: add Tegra114 support
rust: cpumask: Replace `MaybeUninit` and `mem::zeroed` with `Opaque` APIs
cpufreq: Exit governor when failed to start old governor
cpufreq: Move the check of cpufreq_driver->get into cpufreq_verify_current_freq()
cpufreq: Init policy->rwsem before it may be possibly used
cpufreq: Initialize cpufreq-based frequency-invariance later
cpufreq: Remove duplicate check in __cpufreq_offline()
cpufreq: Contain scaling_cur_freq.attr in cpufreq_attrs
cpufreq: intel_pstate: Add Granite Rapids support in no-HWP mode
cpufreq: intel_pstate: Always use HWP_DESIRED_PERF in passive mode
PM / devfreq: Add HiSilicon uncore frequency scaling driver
...
Pull landlock update from Mickaël Salaün:
"Fix test issues, improve build compatibility, and add new tests"
* tag 'landlock-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
landlock: Fix cosmetic change
samples/landlock: Fix building on musl libc
landlock: Fix warning from KUnit tests
selftests/landlock: Add test to check rule tied to covered mount point
selftests/landlock: Fix build of audit_test
selftests/landlock: Fix readlink check
Pull crypto library updates from Eric Biggers:
"This is the main crypto library pull request for 6.17. The main focus
this cycle is on reorganizing the SHA-1 and SHA-2 code, providing
high-quality library APIs for SHA-1 and SHA-2 including HMAC support,
and establishing conventions for lib/crypto/ going forward:
- Migrate the SHA-1 and SHA-512 code (and also SHA-384 which shares
most of the SHA-512 code) into lib/crypto/. This includes both the
generic and architecture-optimized code. Greatly simplify how the
architecture-optimized code is integrated. Add an easy-to-use
library API for each SHA variant, including HMAC support. Finally,
reimplement the crypto_shash support on top of the library API.
- Apply the same reorganization to the SHA-256 code (and also SHA-224
which shares most of the SHA-256 code). This is a somewhat smaller
change, due to my earlier work on SHA-256. But this brings in all
the same additional improvements that I made for SHA-1 and SHA-512.
There are also some smaller changes:
- Move the architecture-optimized ChaCha, Poly1305, and BLAKE2s code
from arch/$(SRCARCH)/lib/crypto/ to lib/crypto/$(SRCARCH)/. For
these algorithms it's just a move, not a full reorganization yet.
- Fix the MIPS chacha-core.S to build with the clang assembler.
- Fix the Poly1305 functions to work in all contexts.
- Fix a performance regression in the x86_64 Poly1305 code.
- Clean up the x86_64 SHA-NI optimized SHA-1 assembly code.
Note that since the new organization of the SHA code is much simpler,
the diffstat of this pull request is negative, despite the addition of
new fully-documented library APIs for multiple SHA and HMAC-SHA
variants.
These APIs will allow further simplifications across the kernel as
users start using them instead of the old-school crypto API. (I've
already written a lot of such conversion patches, removing over 1000
more lines of code. But most of those will target 6.18 or later)"
* tag 'libcrypto-updates-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (67 commits)
lib/crypto: arm64/sha512-ce: Drop compatibility macros for older binutils
lib/crypto: x86/sha1-ni: Convert to use rounds macros
lib/crypto: x86/sha1-ni: Minor optimizations and cleanup
crypto: sha1 - Remove sha1_base.h
lib/crypto: x86/sha1: Migrate optimized code into library
lib/crypto: sparc/sha1: Migrate optimized code into library
lib/crypto: s390/sha1: Migrate optimized code into library
lib/crypto: powerpc/sha1: Migrate optimized code into library
lib/crypto: mips/sha1: Migrate optimized code into library
lib/crypto: arm64/sha1: Migrate optimized code into library
lib/crypto: arm/sha1: Migrate optimized code into library
crypto: sha1 - Use same state format as legacy drivers
crypto: sha1 - Wrap library and add HMAC support
lib/crypto: sha1: Add HMAC support
lib/crypto: sha1: Add SHA-1 library functions
lib/crypto: sha1: Rename sha1_init() to sha1_init_raw()
crypto: x86/sha1 - Rename conflicting symbol
lib/crypto: sha2: Add hmac_sha*_init_usingrawkey()
lib/crypto: arm/poly1305: Remove unneeded empty weak function
lib/crypto: x86/poly1305: Fix performance regression on short messages
...
Pull hardening updates from Kees Cook:
- Introduce and start using TRAILING_OVERLAP() helper for fixing
embedded flex array instances (Gustavo A. R. Silva)
- mux: Convert mux_control_ops to a flex array member in mux_chip
(Thorsten Blum)
- string: Group str_has_prefix() and strstarts() (Andy Shevchenko)
- Remove KCOV instrumentation from __init and __head (Ritesh Harjani,
Kees Cook)
- Refactor and rename stackleak feature to support Clang
- Add KUnit test for seq_buf API
- Fix KUnit fortify test under LTO
* tag 'hardening-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (22 commits)
sched/task_stack: Add missing const qualifier to end_of_stack()
kstack_erase: Support Clang stack depth tracking
kstack_erase: Add -mgeneral-regs-only to silence Clang warnings
init.h: Disable sanitizer coverage for __init and __head
kstack_erase: Disable kstack_erase for all of arm compressed boot code
x86: Handle KCOV __init vs inline mismatches
arm64: Handle KCOV __init vs inline mismatches
s390: Handle KCOV __init vs inline mismatches
arm: Handle KCOV __init vs inline mismatches
mips: Handle KCOV __init vs inline mismatch
powerpc/mm/book3s64: Move kfence and debug_pagealloc related calls to __init section
configs/hardening: Enable CONFIG_INIT_ON_FREE_DEFAULT_ON
configs/hardening: Enable CONFIG_KSTACK_ERASE
stackleak: Split KSTACK_ERASE_CFLAGS from GCC_PLUGINS_CFLAGS
stackleak: Rename stackleak_track_stack to __sanitizer_cov_stack_depth
stackleak: Rename STACKLEAK to KSTACK_ERASE
seq_buf: Introduce KUnit tests
string: Group str_has_prefix() and strstarts()
kunit/fortify: Add back "volatile" for sizeof() constants
acpi: nfit: intel: avoid multiple -Wflex-array-member-not-at-end warnings
...
Pull block updates from Jens Axboe:
- MD pull request via Yu:
- call del_gendisk synchronously (Xiao)
- cleanup unused variable (John)
- cleanup workqueue flags (Ryo)
- fix faulty rdev can't be removed during resync (Qixing)
- NVMe pull request via Christoph:
- try PCIe function level reset on init failure (Keith Busch)
- log TLS handshake failures at error level (Maurizio Lombardi)
- pci-epf: do not complete commands twice if nvmet_req_init()
fails (Rick Wertenbroek)
- misc cleanups (Alok Tiwari)
- Removal of the pktcdvd driver
This has been more than a decade coming at this point, and some
recently revealed breakages that had it causing issues even for cases
where it isn't required made me re-pull the trigger on this one. It's
known broken and nobody has stepped up to maintain the code
- Series for ublk supporting batch commands, enabling the use of
multishot where appropriate
- Speed up ublk exit handling
- Fix for the two-stage elevator fixing which could leak data
- Convert NVMe to use the new IOVA based API
- Increase default max transfer size to something more reasonable
- Series fixing write operations on zoned DM devices
- Add tracepoints for zoned block device operations
- Prep series working towards improving blk-mq queue management in the
presence of isolated CPUs
- Don't allow updating of the block size of a loop device that is
currently under exclusively ownership/open
- Set chunk sectors from stacked device stripe size and use it for the
atomic write size limit
- Switch to folios in bcache read_super()
- Fix for CD-ROM MRW exit flush handling
- Various tweaks, fixes, and cleanups
* tag 'for-6.17/block-20250728' of git://git.kernel.dk/linux: (94 commits)
block: restore two stage elevator switch while running nr_hw_queue update
cdrom: Call cdrom_mrw_exit from cdrom_release function
sunvdc: Balance device refcount in vdc_port_mpgroup_check
nvme-pci: try function level reset on init failure
dm: split write BIOs on zone boundaries when zone append is not emulated
block: use chunk_sectors when evaluating stacked atomic write limits
dm-stripe: limit chunk_sectors to the stripe size
md/raid10: set chunk_sectors limit
md/raid0: set chunk_sectors limit
block: sanitize chunk_sectors for atomic write limits
ilog2: add max_pow_of_two_factor()
nvmet: pci-epf: Do not complete commands twice if nvmet_req_init() fails
nvme-tcp: log TLS handshake failures at error level
docs: nvme: fix grammar in nvme-pci-endpoint-target.rst
nvme: fix typo in status code constant for self-test in progress
nvmet: remove redundant assignment of error code in nvmet_ns_enable()
nvme: fix incorrect variable in io cqes error message
nvme: fix multiple spelling and grammar issues in host drivers
block: fix blk_zone_append_update_request_bio() kernel-doc
md/raid10: fix set but not used variable in sync_request_write()
...
Pull vfs bpf updates from Christian Brauner:
"These changes allow bpf to read extended attributes from cgroupfs.
This is useful in redirecting AF_UNIX socket connections based on
cgroup membership of the socket. One use-case is the ability to
implement log namespaces in systemd so services and containers are
redirected to different journals"
* tag 'vfs-6.17-rc1.bpf' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests/kernfs: test xattr retrieval
selftests/bpf: Add tests for bpf_cgroup_read_xattr
bpf: Mark cgroup_subsys_state->cgroup RCU safe
bpf: Introduce bpf_cgroup_read_xattr to read xattr of cgroup's node
kernfs: remove iattr_mutex
Pull pidfs updates from Christian Brauner:
- persistent info
Persist exit and coredump information independent of whether anyone
currently holds a pidfd for the struct pid.
The current scheme allocated pidfs dentries on-demand repeatedly.
This scheme is reaching it's limits as it makes it impossible to pin
information that needs to be available after the task has exited or
coredumped and that should not be lost simply because the pidfd got
closed temporarily. The next opener should still see the stashed
information.
This is also a prerequisite for supporting extended attributes on
pidfds to allow attaching meta information to them.
If someone opens a pidfd for a struct pid a pidfs dentry is allocated
and stashed in pid->stashed. Once the last pidfd for the struct pid
is closed the pidfs dentry is released and removed from pid->stashed.
So if 10 callers create a pidfs dentry for the same struct pid
sequentially, i.e., each closing the pidfd before the other creates a
new one then a new pidfs dentry is allocated every time.
Because multiple tasks acquiring and releasing a pidfd for the same
struct pid can race with each another a task may still find a valid
pidfs entry from the previous task in pid->stashed and reuse it. Or
it might find a dead dentry in there and fail to reuse it and so
stashes a new pidfs dentry. Multiple tasks may race to stash a new
pidfs dentry but only one will succeed, the other ones will put their
dentry.
The current scheme aims to ensure that a pidfs dentry for a struct
pid can only be created if the task is still alive or if a pidfs
dentry already existed before the task was reaped and so exit
information has been was stashed in the pidfs inode.
That's great except that it's buggy. If a pidfs dentry is stashed in
pid->stashed after pidfs_exit() but before __unhash_process() is
called we will return a pidfd for a reaped task without exit
information being available.
The pidfds_pid_valid() check does not guard against this race as it
doens't sync at all with pidfs_exit(). The pid_has_task() check might
be successful simply because we're before __unhash_process() but
after pidfs_exit().
Introduce a new scheme where the lifetime of information associated
with a pidfs entry (coredump and exit information) isn't bound to the
lifetime of the pidfs inode but the struct pid itself.
The first time a pidfs dentry is allocated for a struct pid a struct
pidfs_attr will be allocated which will be used to store exit and
coredump information.
If all pidfs for the pidfs dentry are closed the dentry and inode can
be cleaned up but the struct pidfs_attr will stick until the struct
pid itself is freed. This will ensure minimal memory usage while
persisting relevant information.
The new scheme has various advantages. First, it allows to close the
race where we end up handing out a pidfd for a reaped task for which
no exit information is available. Second, it minimizes memory usage.
Third, it allows to remove complex lifetime tracking via dentries
when registering a struct pid with pidfs. There's no need to get or
put a reference. Instead, the lifetime of exit and coredump
information associated with a struct pid is bound to the lifetime of
struct pid itself.
- extended attributes
Now that we have a way to persist information for pidfs dentries we
can start supporting extended attributes on pidfds. This will allow
userspace to attach meta information to tasks.
One natural extension would be to introduce a custom pidfs.* extended
attribute space and allow for the inheritance of extended attributes
across fork() and exec().
The first simple scheme will allow privileged userspace to set
trusted extended attributes on pidfs inodes.
- Allow autonomous pidfs file handles
Various filesystems such as pidfs and drm support opening file
handles without having to require a file descriptor to identify the
filesystem. The filesystem are global single instances and can be
trivially identified solely on the information encoded in the file
handle.
This makes it possible to not have to keep or acquire a sentinal file
descriptor just to pass it to open_by_handle_at() to identify the
filesystem. That's especially useful when such sentinel file
descriptor cannot or should not be acquired.
For pidfs this means a file handle can function as full replacement
for storing a pid in a file. Instead a file handle can be stored and
reopened purely based on the file handle.
Such autonomous file handles can be opened with or without specifying
a a file descriptor. If no proper file descriptor is used the
FD_PIDFS_ROOT sentinel must be passed. This allows us to define
further special negative fd sentinels in the future.
Userspace can trivially test for support by trying to open the file
handle with an invalid file descriptor.
- Allow pidfds for reaped tasks with SCM_PIDFD messages
This is a logical continuation of the earlier work to create pidfds
for reaped tasks through the SO_PEERPIDFD socket option merged in
923ea4d448 ("Merge patch series "net, pidfs: enable handing out
pidfds for reaped sk->sk_peer_pid"").
- Two minor fixes:
* Fold fs_struct->{lock,seq} into a seqlock
* Don't bother with path_{get,put}() in unix_open_file()
* tag 'vfs-6.17-rc1.pidfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (37 commits)
don't bother with path_get()/path_put() in unix_open_file()
fold fs_struct->{lock,seq} into a seqlock
selftests: net: extend SCM_PIDFD test to cover stale pidfds
af_unix: enable handing out pidfds for reaped tasks in SCM_PIDFD
af_unix: stash pidfs dentry when needed
af_unix/scm: fix whitespace errors
af_unix: introduce and use scm_replace_pid() helper
af_unix: introduce unix_skb_to_scm helper
af_unix: rework unix_maybe_add_creds() to allow sleep
selftests/pidfd: decode pidfd file handles withou having to specify an fd
fhandle, pidfs: support open_by_handle_at() purely based on file handle
uapi/fcntl: add FD_PIDFS_ROOT
uapi/fcntl: add FD_INVALID
fcntl/pidfd: redefine PIDFD_SELF_THREAD_GROUP
uapi/fcntl: mark range as reserved
fhandle: reflow get_path_anchor()
pidfs: add pidfs_root_path() helper
fhandle: rename to get_path_anchor()
fhandle: hoist copy_from_user() above get_path_from_fd()
fhandle: raise FILEID_IS_DIR in handle_type
...
Pull mmap_prepare updates from Christian Brauner:
"Last cycle we introduce f_op->mmap_prepare() in c84bf6dd2b ("mm:
introduce new .mmap_prepare() file callback").
This is preferred to the existing f_op->mmap() hook as it does require
a VMA to be established yet, thus allowing the mmap logic to invoke
this hook far, far earlier, prior to inserting a VMA into the virtual
address space, or performing any other heavy handed operations.
This allows for much simpler unwinding on error, and for there to be a
single attempt at merging a VMA rather than having to possibly
reattempt a merge based on potentially altered VMA state.
Far more importantly, it prevents inappropriate manipulation of
incompletely initialised VMA state, which is something that has been
the cause of bugs and complexity in the past.
The intent is to gradually deprecate f_op->mmap, and in that vein this
series coverts the majority of file systems to using f_op->mmap_prepare.
Prerequisite steps are taken - firstly ensuring all checks for mmap
capabilities use the file_has_valid_mmap_hooks() helper rather than
directly checking for f_op->mmap (which is now not a valid check) and
secondly updating daxdev_mapping_supported() to not require a VMA
parameter to allow ext4 and xfs to be converted.
Commit bb666b7c27 ("mm: add mmap_prepare() compatibility layer for
nested file systems") handles the nasty edge-case of nested file
systems like overlayfs, which introduces a compatibility shim to allow
f_op->mmap_prepare() to be invoked from an f_op->mmap() callback.
This allows for nested filesystems to continue to function correctly
with all file systems regardless of which callback is used. Once we
finally convert all file systems, this shim can be removed.
As a result, ecryptfs, fuse, and overlayfs remain unaltered so they
can nest all other file systems.
We additionally do not update resctl - as this requires an update to
remap_pfn_range() (or an alternative to it) which we defer to a later
series, equally we do not update cramfs which needs a mixed mapping
insertion with the same issue, nor do we update procfs, hugetlbfs,
syfs or kernfs all of which require VMAs for internal state and hooks.
We shall return to all of these later"
* tag 'vfs-6.17-rc1.mmap_prepare' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
doc: update porting, vfs documentation to describe mmap_prepare()
fs: replace mmap hook with .mmap_prepare for simple mappings
fs: convert most other generic_file_*mmap() users to .mmap_prepare()
fs: convert simple use of generic_file_*_mmap() to .mmap_prepare()
mm/filemap: introduce generic_file_*_mmap_prepare() helpers
fs/xfs: transition from deprecated .mmap hook to .mmap_prepare
fs/ext4: transition from deprecated .mmap hook to .mmap_prepare
fs/dax: make it possible to check dev dax support without a VMA
fs: consistently use can_mmap_file() helper
mm/nommu: use file_has_valid_mmap_hooks() helper
mm: rename call_mmap/mmap_prepare to vfs_mmap/mmap_prepare
Pull coredump updates from Christian Brauner:
"This contains an extension to the coredump socket and a proper rework
of the coredump code.
- This extends the coredump socket to allow the coredump server to
tell the kernel how to process individual coredumps. This allows
for fine-grained coredump management. Userspace can decide to just
let the kernel write out the coredump, or generate the coredump
itself, or just reject it.
* COREDUMP_KERNEL
The kernel will write the coredump data to the socket.
* COREDUMP_USERSPACE
The kernel will not write coredump data but will indicate to the
parent that a coredump has been generated. This is used when
userspace generates its own coredumps.
* COREDUMP_REJECT
The kernel will skip generating a coredump for this task.
* COREDUMP_WAIT
The kernel will prevent the task from exiting until the coredump
server has shutdown the socket connection.
The flexible coredump socket can be enabled by using the "@@"
prefix instead of the single "@" prefix for the regular coredump
socket:
@@/run/systemd/coredump.socket
- Cleanup the coredump code properly while we have to touch it
anyway.
Split out each coredump mode in a separate helper so it's easy to
grasp what is going on and make the code easier to follow. The core
coredump function should now be very trivial to follow"
* tag 'vfs-6.17-rc1.coredump' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (31 commits)
cleanup: add a scoped version of CLASS()
coredump: add coredump_skip() helper
coredump: avoid pointless variable
coredump: order auto cleanup variables at the top
coredump: add coredump_cleanup()
coredump: auto cleanup prepare_creds()
cred: add auto cleanup method
coredump: directly return
coredump: auto cleanup argv
coredump: add coredump_write()
coredump: use a single helper for the socket
coredump: move pipe specific file check into coredump_pipe()
coredump: split pipe coredumping into coredump_pipe()
coredump: move core_pipe_count to global variable
coredump: prepare to simplify exit paths
coredump: split file coredumping into coredump_file()
coredump: rename do_coredump() to vfs_coredump()
selftests/coredump: make sure invalid paths are rejected
coredump: validate socket path in coredump_parse()
coredump: don't allow ".." in coredump socket path
...
Pull misc fixes from Andrew Morton:
"11 hotfixes. 9 are cc:stable and the remainder address post-6.15
issues or aren't considered necessary for -stable kernels.
7 are for MM"
* tag 'mm-hotfixes-stable-2025-07-24-18-03' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
sprintf.h requires stdarg.h
resource: fix false warning in __request_region()
mm/damon/core: commit damos_quota_goal->nid
kasan: use vmalloc_dump_obj() for vmalloc error reports
mm/ksm: fix -Wsometimes-uninitialized from clang-21 in advisor_mode_show()
mm: update MAINTAINERS entry for HMM
nilfs2: reject invalid file types when reading inodes
selftests/mm: fix split_huge_page_test for folio_split() tests
mailmap: add entry for Senozhatsky
mm/zsmalloc: do not pass __GFP_MOVABLE if CONFIG_COMPACTION=n
mm/vmscan: fix hwpoisoned large folio handling in shrink_folio_list
Pull networking fixes from Paolo Abeni:
"Including fixes from can and xfrm.
The TI regression notified last week is actually on our net-next tree,
it does not affect 6.16.
We are investigating a virtio regression which is quite hard to
reproduce - currently only our CI sporadically hits it. Hopefully it
should not be critical, and I'm not sure that an additional week would
be enough to solve it.
Current release - fix to a fix:
- sched: sch_qfq: avoid sleeping in atomic context in qfq_delete_class
Previous releases - regressions:
- xfrm:
- set transport header to fix UDP GRO handling
- delete x->tunnel as we delete x
- eth:
- mlx5: fix memory leak in cmd_exec()
- i40e: when removing VF MAC filters, avoid losing PF-set MAC
- gve: fix stuck TX queue for DQ queue format
Previous releases - always broken:
- can: fix NULL pointer deref of struct can_priv::do_set_mode
- eth:
- ice: fix a null pointer dereference in ice_copy_and_init_pkg()
- ism: fix concurrency management in ism_cmd()
- dpaa2: fix device reference count leak in MAC endpoint handling
- icssg-prueth: fix buffer allocation for ICSSG
Misc:
- selftests: mptcp: increase code coverage"
* tag 'net-6.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (34 commits)
net: hns3: default enable tx bounce buffer when smmu enabled
net: hns3: fixed vf get max channels bug
net: hns3: disable interrupt when ptp init failed
net: hns3: fix concurrent setting vlan filter issue
s390/ism: fix concurrency management in ism_cmd()
selftests: drv-net: wait for iperf client to stop sending
MAINTAINERS: Add in6.h to MAINTAINERS
selftests: netfilter: tone-down conntrack clash test
can: netlink: can_changelink(): fix NULL pointer deref of struct can_priv::do_set_mode
net/sched: sch_qfq: Avoid triggering might_sleep in atomic context in qfq_delete_class
gve: Fix stuck TX queue for DQ queue format
net: appletalk: Fix use-after-free in AARP proxy probe
net: bcmasp: Restore programming of TX map vector register
selftests: mptcp: connect: also cover checksum
selftests: mptcp: connect: also cover alt modes
e1000e: ignore uninitialized checksum word on tgp
e1000e: disregard NVM checksum on tgp when valid checksum bit is not set
ice: Fix a null pointer dereference in ice_copy_and_init_pkg()
i40e: When removing VF MAC filters, only check PF-set MAC
i40e: report VF tx_dropped with tx_errors instead of tx_discards
...
A few packets may still be sent out during the termination of iperf
processes. These late packets cause failures in rss_ctx.py when they
arrive on queues expected to be empty.
Example failure observed:
Check failed 2 != 0 traffic on inactive queues (context 1):
[0, 0, 1, 1, 386385, 397196, 0, 0, 0, 0, ...]
Check failed 4 != 0 traffic on inactive queues (context 2):
[0, 0, 0, 0, 2, 2, 247152, 253013, 0, 0, ...]
Check failed 2 != 0 traffic on inactive queues (context 3):
[0, 0, 0, 0, 0, 0, 1, 1, 282434, 283070, ...]
To avoid such failures, wait until all client sockets for the requested
port are either closed or in the TIME_WAIT state.
Fixes: 847aa551fa ("selftests: drv-net: rss_ctx: factor out send traffic and check")
Signed-off-by: Nimrod Oren <noren@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250722122655.3194442-1-noren@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test is supposed to observe that the 'clash_resolve' stat counter
incremented (i.e., the code path was covered).
This check was incorrect, 'conntrack -S' needs to be called in the
revevant namespace, not the initial netns.
The clash resolution logic in conntrack is only exercised when multiple
packets with the same udp quadruple race. Depending on kernel config,
number of CPUs, scheduling policy etc. this might not trigger even
after several retries. Thus the script eventually returns SKIP if the
retry count is exceeded.
The udpclash tool with also exit with a failure if it did not observe
the expected number of replies.
In the script, make a note of this but do not fail anymore, just check if
the clash resolution logic triggered after all.
Remove the 'single-core' test: while unlikely, with preemptible kernel it
should be possible to also trigger clash resolution logic.
With this change the test will either SKIP or pass.
Hard error could be restored later once its clear whats going on, so
also dump 'conntrack -S' when some packets went missing to see if
conntrack dropped them on insert.
Fixes: 78a5883635 ("selftests: netfilter: add conntrack clash resolution test case")
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20250721223652.6956-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge miscellaneous power management updates and cpupower utility
updates for 6.17-rc1:
- Update contact information in the PM ABI docs and maintainer
information in the power domains DT binding (Rafael Wysocki)
- Update PM header inclusions to follow the IWYU (Include What You Use)
principle (Andy Shevchenko)
- Add flags to specify power on attach/detach for PM domains, make the
driver core detach PM domains in device_unbind_cleanup(), and drop
the dev_pm_domain_detach() call from the platform bus type (Claudiu
Beznea)
- Improve Python binding's Makefile for cpupower (John B. Wyatt IV)
- Fix printing of CORE, CPU fields in cpupower-monitor (Gautham Shenoy)
* pm-misc:
PM: docs: Use my kernel.org address in ABI docs and DT bindings
driver core: platform: Drop dev_pm_domain_detach() call
PM: domains: Detach on device_unbind_cleanup()
PM: domains: Add flags to specify power on attach/detach
PM: Don't use "proxy" headers
* pm-tools:
cpupower: Improve Python binding's Makefile
pm: cpupower: Fix printing of CORE, CPU fields in cpupower-monitor
pm: cpupower: Fix the snapshot-order of tsc,mperf, clock in mperf_stop()
The Clang stack depth tracking implementation has a fixed name for
the stack depth tracking callback, "__sanitizer_cov_stack_depth", so
rename the GCC plugin function to match since the plugin has no external
dependencies on naming.
Link: https://lore.kernel.org/r/20250717232519.2984886-2-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
In preparation for adding Clang sanitizer coverage stack depth tracking
that can support stack depth callbacks:
- Add the new top-level CONFIG_KSTACK_ERASE option which will be
implemented either with the stackleak GCC plugin, or with the Clang
stack depth callback support.
- Rename CONFIG_GCC_PLUGIN_STACKLEAK as needed to CONFIG_KSTACK_ERASE,
but keep it for anything specific to the GCC plugin itself.
- Rename all exposed "STACKLEAK" names and files to "KSTACK_ERASE" (named
for what it does rather than what it protects against), but leave as
many of the internals alone as possible to avoid even more churn.
While here, also split "prev_lowest_stack" into CONFIG_KSTACK_ERASE_METRICS,
since that's the only place it is referenced from.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250717232519.2984886-1-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
The "mmap" and "sendfile" alternate modes for mptcp_connect.sh/.c are
available from the beginning, but only tested when mptcp_connect.sh is
manually launched with "-m mmap" or "-m sendfile", not via the
kselftests helpers.
The MPTCP CI was manually running "mptcp_connect.sh -m mmap", but not
"-m sendfile". Plus other CIs, especially the ones validating the stable
releases, were not validating these alternate modes.
To make sure these modes are validated by these CIs, add two new test
programs executing mptcp_connect.sh with the alternate modes.
Fixes: 048d19d444 ("mptcp: add basic kselftest for mptcp")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250715-net-mptcp-sft-connect-alt-v2-1-8230ddd82454@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull locking fix from Thomas Gleixner:
"A single fix for the futex selftest code to make 32-bit user space
work correctly on 64-bit kernels.
sys_futex_wait() expects a struct __kernel_timespec for the timeout,
but the selftest uses struct timespec, which is the original 32-bit
non 2038 compliant variant.
Fix it up by converting the callsite supplied timespec to a
__kernel_timespec and hand that into the syscall"
* tag 'locking-urgent-2025-07-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/futex: Convert 32-bit timespec to 64-bit version for 32-bit compatibility mode
Pull hyperv fixes from Wei Liu:
- Select use CONFIG_SYSFB only if EFI is enabled (Michael Kelley)
- An assorted set of fixes to remove warnings for missing export.h
header inclusion (Naman Jain)
- An assorted set of fixes for when Linux run as the root partition
for Microsoft Hypervisor (Mukesh Rathor, Nuno Das Neves, Stanislav
Kinsburskii)
- Fix the check for HYPERVISOR_CALLBACK_VECTOR (Naman Jain)
- Fix fcopy tool to handle irregularities with size of ring buffer
(Naman Jain)
- Fix incorrect file path conversion in fcopy tool (Yasumasa Suenaga)
* tag 'hyperv-fixes-signed-20250718' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
tools/hv: fcopy: Fix irregularities with size of ring buffer
PCI: hv: Use the correct hypercall for unmasking interrupts on nested
x86/hyperv: Expose hv_map_msi_interrupt()
Drivers: hv: Use nested hypercall for post message and signal event
x86/hyperv: Clean up hv_map/unmap_interrupt() return values
x86/hyperv: Fix usage of cpu_online_mask to get valid cpu
PCI: hv: Don't load the driver for baremetal root partition
net: mana: Fix warnings for missing export.h header inclusion
PCI: hv: Fix warnings for missing export.h header inclusion
clocksource: hyper-v: Fix warnings for missing export.h header inclusion
x86/hyperv: Fix warnings for missing export.h header inclusion
Drivers: hv: Fix warnings for missing export.h header inclusion
Drivers: hv: Fix the check for HYPERVISOR_CALLBACK_VECTOR
tools/hv: fcopy: Fix incorrect file path conversion
Drivers: hv: Select CONFIG_SYSFB only if EFI is enabled
Pull sched_ext fixes from Tejun Heo:
- Fix handling of migration disabled tasks in default idle selection
- update_locked_rq() called __this_cpu_write() spuriously with NULL
when @rq was not locked. As the writes were spurious, it didn't break
anything directly. However, the function could be called in a
preemptible leading to a context warning in __this_cpu_write(). Skip
the spurious NULL writes.
- Selftest fix on UP
* tag 'sched_ext-for-6.16-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: idle: Handle migration-disabled tasks in idle selection
sched/ext: Prevent update_locked_rq() calls with NULL rq
selftests/sched_ext: Fix exit selftest hang on UP
Pull Rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Fix build and modpost confusion for the upcoming Rust 1.89.0
release
- Clean objtool warning for the upcoming Rust 1.89.0 release by
adding one more noreturn function
'kernel' crate:
- Fix build error when using generics in the 'try_{,pin_}init!'
macros"
* tag 'rust-fixes-6.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: use `#[used(compiler)]` to fix build and `modpost` with Rust >= 1.89.0
objtool/rust: add one more `noreturn` Rust function for Rust 1.89.0
rust: init: Fix generics in *_init! macros
Pull bpf fixes from Alexei Starovoitov:
- Fix handling of BPF arena relocations (Andrii Nakryiko)
- Fix race in bpf_arch_text_poke() on s390 (Ilya Leoshkevich)
- Fix use of virt_to_phys() on arm64 when mmapping BTF (Lorenz Bauer)
- Reject %p% format string in bprintf-like BPF helpers (Paul Chaignon)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
libbpf: Fix handling of BPF arena relocations
btf: Fix virt_to_phys() on arm64 when mmapping BTF
selftests/bpf: Stress test attaching a BPF prog to another BPF prog
s390/bpf: Fix bpf_arch_text_poke() with new_addr == NULL again
selftests/bpf: Add negative test cases for snprintf
bpf: Reject %p% format string in bprintf-like helpers
Initial __arena global variable support implementation in libbpf
contains a bug: it remembers struct bpf_map pointer for arena, which is
used later on to process relocations. Recording this pointer is
problematic because map pointers are not stable during ELF relocation
collection phase, as an array of struct bpf_map's can be reallocated,
invalidating all the pointers. Libbpf is dealing with similar issues by
using a stable internal map index, though for BPF arena map specifically
this approach wasn't used due to an oversight.
The resulting behavior is non-deterministic issue which depends on exact
layout of ELF object file, number of actual maps, etc. We didn't hit
this until very recently, when this bug started triggering crash in BPF
CI when validating one of sched-ext BPF programs.
The fix is rather straightforward: we just follow an established pattern
of remembering map index (just like obj->kconfig_map_idx, for example)
instead of `struct bpf_map *`, and resolving index to a pointer at the
point where map information is necessary.
While at it also add debug-level message for arena-related relocation
resolution information, which we already have for all other kinds of
maps.
Fixes: 2e7ba4f8fd ("libbpf: Recognize __arena global variables.")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250718001009.610955-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth, CAN, WiFi and Netfilter.
More code here than I would have liked. That said, better now than
next week. Nothing particularly scary stands out. The improvement to
the OpenVPN input validation is a bit large but better get them in
before the code makes it to a final release. Some of the changes we
got from sub-trees could have been split better between the fix and
-next refactoring, IMHO, that has been communicated.
We have one known regression in a TI AM65 board not getting link. The
investigation is going a bit slow, a number of people are on vacation.
We'll try to wrap it up, but don't think it should hold up the
release.
Current release - fix to a fix:
- Bluetooth: L2CAP: fix attempting to adjust outgoing MTU, it broke
some headphones and speakers
Current release - regressions:
- wifi: ath12k: fix packets received in WBM error ring with REO LUT
enabled, fix Rx performance regression
- wifi: iwlwifi:
- fix crash due to a botched indexing conversion
- mask reserved bits in chan_state_active_bitmap, avoid FW assert()
Current release - new code bugs:
- nf_conntrack: fix crash due to removal of uninitialised entry
- eth: airoha: fix potential UaF in airoha_npu_get()
Previous releases - regressions:
- net: fix segmentation after TCP/UDP fraglist GRO
- af_packet: fix the SO_SNDTIMEO constraint not taking effect and a
potential soft lockup waiting for a completion
- rpl: fix UaF in rpl_do_srh_inline() for sneaky skb geometry
- virtio-net: fix recursive rtnl_lock() during probe()
- eth: stmmac: populate entire system_counterval_t in get_time_fn()
- eth: libwx: fix a number of crashes in the driver Rx path
- hv_netvsc: prevent IPv6 addrconf after IFF_SLAVE lost that meaning
Previous releases - always broken:
- mptcp: fix races in handling connection fallback to pure TCP
- rxrpc: assorted error handling and race fixes
- sched: another batch of "security" fixes for qdiscs (QFQ, HTB)
- tls: always refresh the queue when reading sock, avoid UaF
- phy: don't register LEDs for genphy, avoid deadlock
- Bluetooth: btintel: check if controller is ISO capable on
btintel_classify_pkt_type(), work around FW returning incorrect
capabilities
Misc:
- make OpenVPN Netlink input checking more strict before it makes it
to a final release
- wifi: cfg80211: remove scan request n_channels __counted_by, it's
only yielding false positives"
* tag 'net-6.16-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (66 commits)
rxrpc: Fix to use conn aborts for conn-wide failures
rxrpc: Fix transmission of an abort in response to an abort
rxrpc: Fix notification vs call-release vs recvmsg
rxrpc: Fix recv-recv race of completed call
rxrpc: Fix irq-disabled in local_bh_enable()
selftests/tc-testing: Test htb_dequeue_tree with deactivation and row emptying
net/sched: Return NULL when htb_lookup_leaf encounters an empty rbtree
net: bridge: Do not offload IGMP/MLD messages
selftests: Add test cases for vlan_filter modification during runtime
net: vlan: fix VLAN 0 refcount imbalance of toggling filtering during runtime
tls: always refresh the queue when reading sock
virtio-net: fix recursived rtnl_lock() during probe()
net/mlx5: Update the list of the PCI supported devices
hv_netvsc: Set VF priv_flags to IFF_NO_ADDRCONF before open to prevent IPv6 addrconf
phonet/pep: Move call to pn_skb_get_dst_sockaddr() earlier in pep_sock_accept()
Bluetooth: L2CAP: Fix attempting to adjust outgoing MTU
netfilter: nf_conntrack: fix crash due to removal of uninitialised entry
net: fix segmentation after TCP/UDP fraglist GRO
ipv6: mcast: Delay put pmc->idev in mld_del_delrec()
net: airoha: fix potential use-after-free in airoha_npu_get()
...
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following batch contains Netfilter fixes for net:
1) Three patches to enhance conntrack selftests for resize and clash
resolution, from Florian Westphal.
2) Expand nft_concat_range.sh selftest to improve coverage from error
path, from Florian Westphal.
3) Hide clash bit to userspace from netlink dumps until there is a
good reason to expose, from Florian Westphal.
4) Revert notification for device registration/unregistration for
nftables basechains and flowtables, we decided to go for a better
way to handle this through the nfnetlink_hook infrastructure which
will come via nf-next, patch from Phil Sutter.
5) Fix crash in conntrack due to race related to SLAB_TYPESAFE_BY_RCU
that results in removing a recycled object that is not yet in the
hashes. Move IPS_CONFIRM setting after the object is in the hashes.
From Florian Westphal.
netfilter pull request 25-07-17
* tag 'nf-25-07-17' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_conntrack: fix crash due to removal of uninitialised entry
Revert "netfilter: nf_tables: Add notifications for hook changes"
netfilter: nf_tables: hide clash bit from userspace
selftests: netfilter: nft_concat_range.sh: send packets to empty set
selftests: netfilter: conntrack_resize.sh: also use udpclash tool
selftests: netfilter: add conntrack clash resolution test case
selftests: netfilter: conntrack_resize.sh: extend resize test
====================
Link: https://patch.msgid.link/20250717095808.41725-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pull HID fixes from Benjamin Tissoires:
- one warning cleanup introduced in the last PR (Andy Shevchenko)
- a nasty syzbot buffer underflow fix co-debugged with Alan Stern
(Benjamin Tissoires)
* tag 'hid-for-linus-2025071501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
selftests/hid: add a test case for the recent syzbot underflow
HID: core: do not bypass hid_hw_raw_request
HID: core: ensure __hid_request reserves the report ID as the first byte
HID: core: ensure the allocated report buffer can contain the reserved report ID
HID: debug: Remove duplicate entry (BTN_WHEEL)
'struct thread' is task local structure, and the related code will become
more readable if we pass it via parameter.
Meantime pass 'ublk_thread *' to ublk_io_alloc_sqes(), and this way is
natural since we use per-thread io_uring for handling IO.
More importantly it helps much for removing the current ubq_daemon or
per-io-task limit.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250713143415.2857561-13-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
As described in a previous commit [1], Lion's patch [2] revealed an ancient
bug in the qdisc API. Whenever a user tries to add a qdisc to an
invalid parent (not a class, root, or ingress qdisc), the qdisc API will
detect this after qdisc_create is called. Some qdiscs (like fq_codel, pie,
and sfq) call functions (on their init callback) which assume the parent is
valid, so qdisc_create itself may have caused a NULL pointer dereference in
such cases.
This commit creates 3 TDC tests that attempt to add fq_codel, pie and sfq
qdiscs to invalid parents
- Attempts to add an fq_codel qdisc to an hhf qdisc parent
- Attempts to add a pie qdisc to a drr qdisc parent
- Attempts to add an sfq qdisc to an inexistent hfsc classid (which would
belong to a valid hfsc qdisc)
[1] https://lore.kernel.org/all/20250707210801.372995-1-victor@mojatatu.com/
[2] https://lore.kernel.org/netdev/d912cbd7-193b-4269-9857-525bee8bbb6a@gmail.com/
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20250712145035.705156-1-victor@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Starting with Rust 1.89.0 (expected 2025-08-07), under
`CONFIG_RUST_DEBUG_ASSERTIONS=y`, `objtool` may report:
rust/kernel.o: warning: objtool: _R..._6kernel4pageNtB5_4Page8read_raw()
falls through to next function _R..._6kernel4pageNtB5_4Page9write_raw()
(and many others) due to calls to the `noreturn` symbol:
core::panicking::panic_nounwind_fmt
Thus add the mangled one to the list so that `objtool` knows it is
actually `noreturn`.
See commit 56d680dd23 ("objtool/rust: list `noreturn` Rust functions")
for more details.
Cc: stable@vger.kernel.org # Needed in 6.12.y and later (Rust is pinned in older LTSs).
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250712160103.1244945-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The selftest doesn't cover this error path:
scratch = *raw_cpu_ptr(m->scratch);
if (unlikely(!scratch)) { // here
cover this too.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Previous patch added a new clash resolution test case.
Also use this during conntrack resize stress test in addition
to icmp ping flood.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add a dedicated test to exercise conntrack clash resolution path.
Test program emits 128 identical udp packets in parallel, then reads
back replies from socat echo server.
Also check (via conntrack -S) that the clash path was hit at least once.
Due to the racy nature of the test its possible that despite the
threaded program all packets were processed in-order or on same cpu,
emit a SKIP warning in this case.
Two tests are added:
- one to test the simpler, non-nat case
- one to exercise clash resolution where packets
might have different nat transformations attached to them.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Extend the resize test:
- continuously dump table both via /proc and ctnetlink interfaces while
table is resized in a loop.
- if socat is available, send udp packets in additon to ping requests.
- increase/decrease the icmp and udp timeouts while resizes are happening.
This makes sure we also exercise the 'ct has expired' check that happens
on conntrack lookup.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pull x86 fixes from Borislav Petkov:
- Update Kirill's email address
- Allow hugetlb PMD sharing only on 64-bit as it doesn't make a whole
lotta sense on 32-bit
- Add fixes for a misconfigured AMD Zen2 client which wasn't even
supposed to run Linux
* tag 'x86_urgent_for_v6.16_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Update Kirill Shutemov's email address for TDX
x86/mm: Disable hugetlb page table sharing on 32-bit
x86/CPU/AMD: Disable INVLPGB on Zen2
x86/rdrand: Disable RDSEED on AMD Cyan Skillfish
Pull misc fixes from Andrew Morton:
"19 hotfixes. A whopping 16 are cc:stable and the remainder address
post-6.15 issues or aren't considered necessary for -stable kernels.
14 are for MM. Three gdb-script fixes and a kallsyms build fix"
* tag 'mm-hotfixes-stable-2025-07-11-16-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
Revert "sched/numa: add statistics of numa balance task"
mm: fix the inaccurate memory statistics issue for users
mm/damon: fix divide by zero in damon_get_intervals_score()
samples/damon: fix damon sample mtier for start failure
samples/damon: fix damon sample wsse for start failure
samples/damon: fix damon sample prcl for start failure
kasan: remove kasan_find_vm_area() to prevent possible deadlock
scripts: gdb: vfs: support external dentry names
mm/migrate: fix do_pages_stat in compat mode
mm/damon/core: handle damon_call_control as normal under kdmond deactivation
mm/rmap: fix potential out-of-bounds page table access during batched unmap
mm/hugetlb: don't crash when allocating a folio if there are no resv
scripts/gdb: de-reference per-CPU MCE interrupts
scripts/gdb: fix interrupts.py after maple tree conversion
maple_tree: fix mt_destroy_walk() on root leaf node
mm/vmalloc: leave lazy MMU mode on PTE mapping error
scripts/gdb: fix interrupts display after MCP on x86
lib/alloc_tag: do not acquire non-existent lock in alloc_tag_top_users()
kallsyms: fix build without execinfo
I got the following warning when writing other tests:
+ handle_test_result_pass 'bond 802.3ad' '(lacp_active off)'
+ local 'test_name=bond 802.3ad'
+ shift
+ local 'opt_str=(lacp_active off)'
+ shift
+ log_test_result 'bond 802.3ad' '(lacp_active off)' ' OK '
+ local 'test_name=bond 802.3ad'
+ shift
+ local 'opt_str=(lacp_active off)'
+ shift
+ local 'result= OK '
+ shift
+ local retmsg=
+ shift
/net/tools/testing/selftests/net/forwarding/../lib.sh: line 315: shift: shift count out of range
This happens because an extra shift is executed even after all arguments
have been consumed. Remove the last shift in log_test_result() to avoid
this warning.
Fixes: a923af1cee ("selftests: forwarding: Convert log_test() to recognize RET values")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250709091244.88395-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
