Lochnagar is an evaluation and development board for Cirrus
Logic Smart CODEC and Amp devices. It allows the connection of
most Cirrus Logic devices on mini-cards, as well as allowing
connection of various application processor systems to provide a
full evaluation platform. This driver supports the board
controller chip on the Lochnagar board. Audio system topology,
clocking and power can all be controlled through the Lochnagar
controller chip, allowing the device under test to be used in
a variety of possible use cases.
As the Lochnagar is a fairly complex device this MFD driver
allows the drivers for the various features to be bound
in. Initially clocking, regulator and pinctrl will be added as
these are necessary to configure the system. But in time at least
audio and voltage/current monitoring will also be added.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Lochnagar is an evaluation and development board for Cirrus
Logic Smart CODEC and Amp devices. It allows the connection of
most Cirrus Logic devices on mini-cards, as well as allowing
connection of various application processor systems to provide a
full evaluation platform. This driver supports the board
controller chip on the Lochnagar board.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
These options apply to all regulators in this chip.
ti,strict-supply-voltage-supervision:
Set STRICT flag in CONFIG1
ti,under-voltage-limit-microvolt:
Select 2.75, 2.95, 3.25 or 3.35 V UVLO in CONFIG1
ti,under-voltage-hyst-microvolt:
Select 200mV or 400mV UVLOHYS in CONFIG2
Signed-off-by: Christian Hohnstaedt <Christian.Hohnstaedt@wago.com>
Tested-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The Kconfig currently controlling compilation of this code is:
drivers/mfd/Kconfig:config MFD_WM8350
drivers/mfd/Kconfig: bool
...meaning that it currently is not being built as a module by anyone.
Lets remove the couple traces of modular infrastructure use, so that
when reading the driver there is no doubt it is builtin-only.
We delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.
We replace module.h with init.h and export.h ; the latter since the
file does export some symbols.
Previous demodularizaion work has made wm8350_device_exit() no longer
used, so it is also removed from the 8350 core code.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The Kconfig currently controlling compilation of this code is:
drivers/mfd/Kconfig:config MFD_WM831X
drivers/mfd/Kconfig: bool
...meaning that it currently is not being built as a module by anyone.
Lets remove the couple traces of modular infrastructure use, so that
when reading the driver there is no doubt it is builtin-only.
We delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.
Previous demodularizaion work has made wm831x_device_exit() no longer
used, so it is also removed from the 831x core code.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The entire way how cros debugfs attibutes are created is broken.
cros_ec_sysfs should be its own driver and its attributes should be
associated with the sysfs driver not the mfd driver.
The patch also adds the sysfs documentation.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The entire way how cros debugfs attibutes are created is broken.
cros_ec_debugfs should be its own driver and its attributes should be
associated with a debugfs driver not the mfd driver.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The entire way how cros sysfs attibutes are created is broken.
cros_ec_vbc should be its own driver and its attributes should be
associated with a vbc driver not the mfd driver. In order to retain
the path, the vbc attributes are attached to the cros_class.
The patch also adds the sysfs documentation.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The entire way how cros sysfs attibutes are created is broken.
cros_ec_lightbar should be its own driver and its attributes should be
associated with a lightbar driver not the mfd driver. In order to retain
the path, the lightbar attributes are attached to the cros_class.
The patch also adds the sysfs documentation.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Use devm_mfd_add_devices() for adding cros-ec core MFD child devices. This
reduces the need of remove callback from platform/chrome for removing the
MFD child devices.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Pull networking fixes from David Miller:
1) Fix endless loop in nf_tables, from Phil Sutter.
2) Fix cross namespace ip6_gre tunnel hash list corruption, from
Olivier Matz.
3) Don't be too strict in phy_start_aneg() otherwise we might not allow
restarting auto negotiation. From Heiner Kallweit.
4) Fix various KMSAN uninitialized value cases in tipc, from Ying Xue.
5) Memory leak in act_tunnel_key, from Davide Caratti.
6) Handle chip errata of mv88e6390 PHY, from Andrew Lunn.
7) Remove linear SKB assumption in fou/fou6, from Eric Dumazet.
8) Missing udplite rehash callbacks, from Alexey Kodanev.
9) Log dirty pages properly in vhost, from Jason Wang.
10) Use consume_skb() in neigh_probe() as this is a normal free not a
drop, from Yang Wei. Likewise in macvlan_process_broadcast().
11) Missing device_del() in mdiobus_register() error paths, from Thomas
Petazzoni.
12) Fix checksum handling of short packets in mlx5, from Cong Wang.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (96 commits)
bpf: in __bpf_redirect_no_mac pull mac only if present
virtio_net: bulk free tx skbs
net: phy: phy driver features are mandatory
isdn: avm: Fix string plus integer warning from Clang
net/mlx5e: Fix cb_ident duplicate in indirect block register
net/mlx5e: Fix wrong (zero) TX drop counter indication for representor
net/mlx5e: Fix wrong error code return on FEC query failure
net/mlx5e: Force CHECKSUM_UNNECESSARY for short ethernet frames
tools: bpftool: Cleanup license mess
bpf: fix inner map masking to prevent oob under speculation
bpf: pull in pkt_sched.h header for tooling to fix bpftool build
selftests: forwarding: Add a test case for externally learned FDB entries
selftests: mlxsw: Test FDB offload indication
mlxsw: spectrum_switchdev: Do not treat static FDB entries as sticky
net: bridge: Mark FDB entries that were added by user as such
mlxsw: spectrum_fid: Update dummy FID index
mlxsw: pci: Return error on PCI reset timeout
mlxsw: pci: Increase PCI SW reset timeout
mlxsw: pci: Ring CQ's doorbell before RDQ's
MAINTAINERS: update email addresses of liquidio driver maintainers
...
Pull virtio/vhost fixes and cleanups from Michael Tsirkin:
"Fixes and cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost/scsi: Use copy_to_iter() to send control queue response
vhost: return EINVAL if iovecs size does not match the message size
virtio-balloon: tweak config_changed implementation
virtio: don't allocate vqs when names[i] = NULL
virtio_pci: use queue idx instead of array idx to set up the vq
virtio: document virtio_config_ops restrictions
virtio: fix virtio_config_ops description
Pull misc clang fixes from Miguel Ojeda:
- A fix for OPTIMIZER_HIDE_VAR from Michael S Tsirkin
- Update clang-format with the latest for_each macro list from Jason
Gunthorpe
* tag 'compiler-attributes-for-linus-v5.0-rc3' of git://github.com/ojeda/linux:
include/linux/compiler*.h: fix OPTIMIZER_HIDE_VAR
* tag 'clang-format-for-linus-v5.0-rc3' of git://github.com/ojeda/linux:
clang-format: Update .clang-format with the latest for_each macro list
Pull MIPS fixes from Paul Burton:
- Fix IPI handling for Lantiq SoCs, which was broken by changes made
back in v4.12.
- Enable OF/DT serial support in ath79_defconfig to give us working
serial by default.
- Fix 64b builds for the Jazz platform.
- Set up a struct device for the BCM47xx SoC to allow BCM47xx drivers
to perform DMA again following the major DMA mapping changes made in
v4.19.
- Disable MSI on Cavium Octeon systems when the pcie_disable command
line parameter introduced in v3.3 is used, in order to avoid
inadvetently accessing PCIe controller registers despite the command
line.
- Fix a build failure for Cavium Octeon kernels with kexec enabled,
introduced in v4.20.
- Fix a regression in the behaviour of semctl/shmctl/msgctl IPC
syscalls for kernels including n32 support but not o32 support caused
by some cleanup in v3.19.
* tag 'mips_fixes_5.0_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: OCTEON: fix kexec support
mips: fix n32 compat_ipc_parse_version
Disable MSI also when pcie-octeon.pcie_disable on
MIPS: BCM47XX: Setup struct device for the SoC
MIPS: jazz: fix 64bit build
MIPS: ath79: Enable OF serial ports in the default config
MIPS: lantiq: Use CP0_LEGACY_COMPARE_IRQ
MIPS: lantiq: Fix IPI interrupt handling
Pull libnvdimm fixes from Dan Williams:
"A crash fix, a build warning fix, a miscellaneous small cleanups.
In case anyone is looking for them, there was a regression caught by
testing that caused two patches to be dropped from this update. Those
patches have been reworked and will soak for another week / re-target
5.0-rc4.
- Fix driver initialization crash due to the inability to report an
'error' state for a DIMM's security capability.
- Build warning fix for little-endian ARM64 builds
- Fix a potential race between the EDAC driver's usage of the NFIT
SMBIOS id for a DIMM and the driver shutdown path.
- A small collection of one-line benign cleanups for duplicate
variable assignments, a duplicate header include and a mis-typed
function argument"
* tag 'libnvdimm-fixes-5.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm/security: Fix nvdimm_security_state() state request selection
acpi/nfit: Remove duplicate set nd_set in acpi_nfit_init_interleave_set()
acpi/nfit: Fix race accessing memdev in nfit_get_smbios_id()
libnvdimm/dimm: Fix security capability detection for non-Intel NVDIMMs
nfit: Mark some functions as __maybe_unused
ACPI/nfit: delete the function to_acpi_nfit_desc
ACPI/nfit: delete the redundant header file
Since phy driver features became a link_mode bitmap, phy drivers that
don't have a list of features configured will cause the kernel to crash
when probed.
Prevent the phy driver from registering if the features field is missing.
Fixes: 719655a149 ("net: phy: Replace phy driver features u32 with link_mode bitmap")
Reported-by: Scott Wood <oss@buserror.net>
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In certain cases, pskb_trim_rcsum() may change skb pointers.
Reinitialize header pointers afterwards to avoid potential
use-after-frees. Add a note in the documentation of
pskb_trim_rcsum(). Found by KASAN.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull fbdev fixes from Bartlomiej Zolnierkiewicz:
- fix stack memory leak in omap2fb driver (Vlad Tsyrklevich)
- fix OF node name handling v4.20 regression in offb driver (Rob
Herring)
- convert CONFIG_FB_LOGO_CENTER config option added in v5.0-rc1 into a
kernel parameter (Peter Rosin)
* tag 'fbdev-v5.0-rc3' of git://github.com/bzolnier/linux:
fbdev: fbmem: convert CONFIG_FB_LOGO_CENTER into a cmd line option
fbdev: offb: Fix OF node name handling
omap2fb: Fix stack memory disclosure
Pull rdma fixes frfom Jason Gunthorpe:
"Not much so far. We have the usual batch of bugs and two fixes to code
merged this cycle:
- Restore valgrind support for the ioctl verbs interface merged this
window, and fix a missed error code on an error path from that
conversion
- A user reported crash on obsolete mthca hardware
- pvrdma was using the wrong command opcode toward the hypervisor
- NULL pointer crash regression when dumping rdma-cm over netlink
- Be conservative about exposing the global rkey"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/uverbs: Mark ioctl responses with UVERBS_ATTR_F_VALID_OUTPUT
RDMA/mthca: Clear QP objects during their allocation
RDMA/vmw_pvrdma: Return the correct opcode when creating WR
RDMA/cma: Add cm_id restrack resource based on kernel or user cm_id type
RDMA/nldev: Don't expose unsafe global rkey to regular user
RDMA/uverbs: Fix post send success return value in case of error
Pull AFS fixes from David Howells:
"Here's a set of fixes for AFS:
- Use struct_size() for kzalloc() size calculation.
- When calling YFS.CreateFile rather than AFS.CreateFile, it is
possible to create a file with a file lock already held. The
default value indicating no lock required is actually -1, not 0.
- Fix an oops in inode/vnode validation if the target inode doesn't
have a server interest assigned (ie. a server that will notify us
of changes by third parties).
- Fix refcounting of keys in file locking.
- Fix a race in refcounting asynchronous operations in the event of
an error during request transmission. The provision of a dedicated
function to get an extra ref on a call is split into a separate
commit"
* tag 'afs-fixes-20190117' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Fix race in async call refcounting
afs: Provide a function to get a ref on a call
afs: Fix key refcounting in file locking code
afs: Don't set vnode->cb_s_break in afs_validate()
afs: Set correct lock type for the yfs CreateFile
afs: Use struct_size() in kzalloc()
There's a race between afs_make_call() and afs_wake_up_async_call() in the
case that an error is returned from rxrpc_kernel_send_data() after it has
queued the final packet.
afs_make_call() will try and clean up the mess, but the call state may have
been moved on thereby causing afs_process_async_call() to also try and to
delete the call.
Fix this by:
(1) Getting an extra ref for an asynchronous call for the call itself to
hold. This makes sure the call doesn't evaporate on us accidentally
and will allow the call to be retained by the caller in a future
patch. The ref is released on leaving afs_make_call() or
afs_wait_for_call_to_complete().
(2) In the event of an error from rxrpc_kernel_send_data():
(a) Don't set the call state to AFS_CALL_COMPLETE until *after* the
call has been aborted and ended. This prevents
afs_deliver_to_call() from doing anything with any notifications
it gets.
(b) Explicitly end the call immediately to prevent further callbacks.
(c) Cancel any queued async_work and wait for the work if it's
executing. This allows us to be sure the race won't recur when we
change the state. We put the work queue's ref on the call if we
managed to cancel it.
(d) Put the call's ref that we got in (1). This belongs to us as long
as the call is in state AFS_CALL_CL_REQUESTING.
Fixes: 341f741f04 ("afs: Refcount the afs_call struct")
Signed-off-by: David Howells <dhowells@redhat.com>
The bcm87xx and micrel driver has PHYs which are missing the .features
value. Add them. The bcm87xx is a 10G FEC only PHY. Add the needed
features definition of this PHY.
Fixes: 719655a149 ("net: phy: Replace phy driver features u32 with link_mode bitmap")
Reported-by: Scott Wood <oss@buserror.net>
Reported-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
As reported, the SPDX license id is not placed correctly and the variant
of the BSD License used should be specified.
Fixes: c16292578f ("dt-bindings: reset: Add bindings for the Meson-AXG SoC Reset Controller")
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Rob Herring <robh@kernel.org>
A command line option is much more flexible than a config option and
the supporting code is small. Gets rid of #ifdefs in the code too...
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
STPMIC1 is a PMIC from STMicroelectronics. The STPMIC1 integrates 10
regulators, 3 power switches, a watchdog and an input for a power on key.
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
STPMIC1 is a PMIC from STMicroelectronics. The STPMIC1 integrates 10
regulators, 3 power switches, a watchdog and an input for a power on key.
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This prepares the MFD for the STMPE ADC driver. This commit introduces
devicetree settings that are used by the ADC and adds an init function.
Common ADC settings that are shared with the touchscreen driver can now
reside in the overlying MFD.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Commit 65cab850f0 ("net: Allow class-e address assignment via ifconfig
ioctl") modified the IN_BADCLASS macro a bit, but unfortunatly one too
many '(' characters were added to the line, making any code that used
it, not build properly.
Also, the macro now compares an unsigned with a signed value, which
isn't ok, so fix that up by making both types match properly.
Reported-by: Christopher Ferris <cferris@google.com>
Fixes: 65cab850f0 ("net: Allow class-e address assignment via ifconfig ioctl")
Cc: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The changes introduced to allow rxrpc calls to be retried creates an issue
when it comes to refcounting afs_call structs. The problem is that when
rxrpc_send_data() queues the last packet for an asynchronous call, the
following sequence can occur:
(1) The notify_end_tx callback is invoked which causes the state in the
afs_call to be changed from AFS_CALL_CL_REQUESTING or
AFS_CALL_SV_REPLYING.
(2) afs_deliver_to_call() can then process event notifications from rxrpc
on the async_work queue.
(3) Delivery of events, such as an abort from the server, can cause the
afs_call state to be changed to AFS_CALL_COMPLETE on async_work.
(4) For an asynchronous call, afs_process_async_call() notes that the call
is complete and tried to clean up all the refs on async_work.
(5) rxrpc_send_data() might return the amount of data transferred
(success) or an error - which could in turn reflect a local error or a
received error.
Synchronising the clean up after rxrpc_kernel_send_data() returns an error
with the asynchronous cleanup is then tricky to get right.
Mostly revert commit c038a58ccf. The two API
functions the original commit added aren't currently used. This makes
rxrpc_kernel_send_data() always return successfully if it queued the data
it was given.
Note that this doesn't affect synchronous calls since their Rx notification
function merely pokes a wait queue and does not refcounting. The
asynchronous call notification function *has* to do refcounting and pass a
ref over the work item to avoid the need to sync the workqueue in call
cleanup.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IPv4 routing tables are flushed in two cases:
1. In response to events in the netdev and inetaddr notification chains
2. When a network namespace is being dismantled
In both cases only routes associated with a dead nexthop group are
flushed. However, a nexthop group will only be marked as dead in case it
is populated with actual nexthops using a nexthop device. This is not
the case when the route in question is an error route (e.g.,
'blackhole', 'unreachable').
Therefore, when a network namespace is being dismantled such routes are
not flushed and leaked [1].
To reproduce:
# ip netns add blue
# ip -n blue route add unreachable 192.0.2.0/24
# ip netns del blue
Fix this by not skipping error routes that are not marked with
RTNH_F_DEAD when flushing the routing tables.
To prevent the flushing of such routes in case #1, add a parameter to
fib_table_flush() that indicates if the table is flushed as part of
namespace dismantle or not.
Note that this problem does not exist in IPv6 since error routes are
associated with the loopback device.
[1]
unreferenced object 0xffff888066650338 (size 56):
comm "ip", pid 1206, jiffies 4294786063 (age 26.235s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 b0 1c 62 61 80 88 ff ff ..........ba....
e8 8b a1 64 80 88 ff ff 00 07 00 08 fe 00 00 00 ...d............
backtrace:
[<00000000856ed27d>] inet_rtm_newroute+0x129/0x220
[<00000000fcdfc00a>] rtnetlink_rcv_msg+0x397/0xa20
[<00000000cb85801a>] netlink_rcv_skb+0x132/0x380
[<00000000ebc991d2>] netlink_unicast+0x4c0/0x690
[<0000000014f62875>] netlink_sendmsg+0x929/0xe10
[<00000000bac9d967>] sock_sendmsg+0xc8/0x110
[<00000000223e6485>] ___sys_sendmsg+0x77a/0x8f0
[<000000002e94f880>] __sys_sendmsg+0xf7/0x250
[<00000000ccb1fa72>] do_syscall_64+0x14d/0x610
[<00000000ffbe3dae>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[<000000003a8b605b>] 0xffffffffffffffff
unreferenced object 0xffff888061621c88 (size 48):
comm "ip", pid 1206, jiffies 4294786063 (age 26.235s)
hex dump (first 32 bytes):
6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
6b 6b 6b 6b 6b 6b 6b 6b d8 8e 26 5f 80 88 ff ff kkkkkkkk..&_....
backtrace:
[<00000000733609e3>] fib_table_insert+0x978/0x1500
[<00000000856ed27d>] inet_rtm_newroute+0x129/0x220
[<00000000fcdfc00a>] rtnetlink_rcv_msg+0x397/0xa20
[<00000000cb85801a>] netlink_rcv_skb+0x132/0x380
[<00000000ebc991d2>] netlink_unicast+0x4c0/0x690
[<0000000014f62875>] netlink_sendmsg+0x929/0xe10
[<00000000bac9d967>] sock_sendmsg+0xc8/0x110
[<00000000223e6485>] ___sys_sendmsg+0x77a/0x8f0
[<000000002e94f880>] __sys_sendmsg+0xf7/0x250
[<00000000ccb1fa72>] do_syscall_64+0x14d/0x610
[<00000000ffbe3dae>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[<000000003a8b605b>] 0xffffffffffffffff
Fixes: 8cced9eff1 ("[NETNS]: Enable routing configuration in non-initial namespace.")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
This is the first batch of Netfilter fixes for your net tree:
1) Fix endless loop in nf_tables rules netlink dump, from Phil Sutter.
2) Reference counter leak in object from the error path, from Taehee Yoo.
3) Selective rule dump requires table and chain.
4) Fix DNAT with nft_flow_offload reverse route lookup, from wenxu.
5) Use GFP_KERNEL_ACCOUNT in vmalloc allocation from ebtables, from
Shakeel Butt.
6) Set ifindex from route to fix interaction with VRF slave device,
also from wenxu.
7) Use nfct_help() to check for conntrack helper, IPS_HELPER status
flag is only set from explicit helpers via -j CT, from Henry Yen.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) Fix regression in multi-SKB responses to RTM_GETADDR, from Arthur
Gautier.
2) Fix ipv6 frag parsing in openvswitch, from Yi-Hung Wei.
3) Unbounded recursion in ipv4 and ipv6 GUE tunnels, from Stefano
Brivio.
4) Use after free in hns driver, from Yonglong Liu.
5) icmp6_send() needs to handle the case of NULL skb, from Eric
Dumazet.
6) Missing rcu read lock in __inet6_bind() when operating on mapped
addresses, from David Ahern.
7) Memory leak in tipc-nl_compat_publ_dump(), from Gustavo A. R. Silva.
8) Fix PHY vs r8169 module loading ordering issues, from Heiner
Kallweit.
9) Fix bridge vlan memory leak, from Ido Schimmel.
10) Dev refcount leak in AF_PACKET, from Jason Gunthorpe.
11) Infoleak in ipv6_local_error(), flow label isn't completely
initialized. From Eric Dumazet.
12) Handle mv88e6390 errata, from Andrew Lunn.
13) Making vhost/vsock CID hashing consistent, from Zha Bin.
14) Fix lack of UMH cleanup when it unexpectedly exits, from Taehee Yoo.
15) Bridge forwarding must clear skb->tstamp, from Paolo Abeni.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (87 commits)
bnxt_en: Fix context memory allocation.
bnxt_en: Fix ring checking logic on 57500 chips.
mISDN: hfcsusb: Use struct_size() in kzalloc()
net: clear skb->tstamp in bridge forwarding path
net: bpfilter: disallow to remove bpfilter module while being used
net: bpfilter: restart bpfilter_umh when error occurred
net: bpfilter: use cleanup callback to release umh_info
umh: add exit routine for UMH process
isdn: i4l: isdn_tty: Fix some concurrency double-free bugs
vhost/vsock: fix vhost vsock cid hashing inconsistent
net: stmmac: Prevent RX starvation in stmmac_napi_poll()
net: stmmac: Fix the logic of checking if RX Watchdog must be enabled
net: stmmac: Check if CBS is supported before configuring
net: stmmac: dwxgmac2: Only clear interrupts that are active
net: stmmac: Fix PCI module removal leak
tools/bpf: fix bpftool map dump with bitfields
tools/bpf: test btf bitfield with >=256 struct member offset
bpf: fix bpffs bitfield pretty print
net: ethernet: mediatek: fix warning in phy_start_aneg
tcp: change txhash on SYN-data timeout
...
Some transports (e.g. virtio-ccw) implement virtio operations that
seem to be a simple read/write as something more involved that
cannot be done from an atomic context.
Give at least a hint about that.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- get_features has returned 64 bits since commit d025477368
("virtio: add support for 64 bit features.")
- properly mark all optional callbacks
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Pull MFD updates from Lee Jones:
"New Device Support
- Add support for Power Supply to AXP813
- Add support for GPIO, ADC, AC and Battery Power Supply to AXP803
- Add support for UART to Exynos LPASS
Fix-ups:
- Use supplied MACROS; ti_am335x_tscadc
- Trivial spelling/whitespace/alignment; tmio, axp20x, rave-sp
- Regmap changes; bd9571mwv, wm5110-tables
- Kconfig dependencies; MFD_AT91_USART
- Supply shared data for child-devices; madera-core
- Use new of_node_name_eq() API call; max77620, stmpe
- Use managed resources (devm_*); tps65218
- Comment descriptions; ingenic-tcu
- Coding style; madera-core
Bug Fixes:
- Fix section mismatches; twl-core, db8500-prcmu
- Correct error path related issues; mt6397-core, ab8500-core, mc13xxx-core
- IRQ related fixes; tps6586x
- Ensure proper initialisation sequence; qcom_rpm
- Repair potential memory leak; cros_ec_dev"
* tag 'mfd-next-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (25 commits)
mfd: exynos-lpass: Enable UART module support
mfd: mc13xxx: Fix a missing check of a register-read failure
mfd: cros_ec: Add commands to control codec
mfd: madera: Remove spurious semicolon in while loop
mfd: rave-sp: Fix typo in rave_sp_checksum comment
mfd: ingenic-tcu: Fix bit field description in header
mfd: tps65218: Use devm_regmap_add_irq_chip and clean up error path in probe()
mfd: Use of_node_name_eq() for node name comparisons
mfd: cros_ec_dev: Add missing mfd_remove_devices() call in remove
mfd: axp20x: Add supported cells for AXP803
mfd: axp20x: Re-align MFD cell entries
mfd: axp20x: Add AC power supply cell for AXP813
mfd: wm5110: Add missing ASRC rate register
mfd: qcom_rpm: write fw_version to CTRL_REG
mfd: tps6586x: Handle interrupts on suspend
mfd: madera: Add shared data for accessory detection
mfd: at91-usart: Add platform dependency
mfd: bd9571mwv: Add volatile register to make DVFS work
mfd: ab8500-core: Return zero in get_register_interruptible()
mfd: tmio: Typo s/use use/use/
...
Pull ARM SoC fixes from Olof Johansson:
"A bigger batch than I anticipated this week, for two reasons:
- Some fallout on Davinci from board file -> DTB conversion, that
also includes a few longer-standing fixes (i.e. not recent
regressions).
- drivers/reset material that has been in linux-next for a while, but
didn't get sent to us until now for a variety of reasons
(maintainer out sick, holidays, etc). There's a functional
dependency in there such that one platform (Altera's SoCFPGA) won't
boot without one of the patches; instead of reverting the patch
that got merged, I looked at this set and decided it was small
enough that I'll pick it up anyway. If you disagree I can revisit
with a smaller set.
That being said, there's also a handful of the usual stuff:
- Fix for a crash on Armada 7K/8K when the kernel touches
PSCI-reserved memory
- Fix for PCIe reset on Macchiatobin (Armada 8K development board,
what this email is sent from in fact :)
- Enable a few new-merged modules for Amlogic in arm64 defconfig
- Error path fixes on Integrator
- Build fix for Renesas and Qualcomm
- Initialization fix for Renesas RZ/G2E
.. plus a few more fixlets"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits)
ARM: integrator: impd1: use struct_size() in devm_kzalloc()
qcom-scm: Include <linux/err.h> header
gpio: pl061: handle failed allocations
ARM: dts: kirkwood: Fix polarity of GPIO fan lines
arm64: dts: marvell: mcbin: fix PCIe reset signal
arm64: dts: marvell: armada-ap806: reserve PSCI area
ARM: dts: da850-lcdk: Correct the sound card name
ARM: dts: da850-lcdk: Correct the audio codec regulators
ARM: dts: da850-evm: Correct the sound card name
ARM: dts: da850-evm: Correct the audio codec regulators
ARM: davinci: omapl138-hawk: fix label names in GPIO lookup entries
ARM: davinci: dm644x-evm: fix label names in GPIO lookup entries
ARM: davinci: dm355-evm: fix label names in GPIO lookup entries
ARM: davinci: da850-evm: fix label names in GPIO lookup entries
ARM: davinci: da830-evm: fix label names in GPIO lookup entries
arm64: defconfig: enable modules for amlogic s400 sound card
reset: uniphier-glue: Add AHCI reset control support in glue layer
dt-bindings: reset: uniphier: Add AHCI core reset description
reset: uniphier-usb3: Rename to reset-uniphier-glue
dt-bindings: reset: uniphier: Replace the expression of USB3 with generic peripherals
...
Late reset controller changes for v5.0
This adds missing deassert functionality to the ARC HSDK reset driver,
fixes some indentation and grammar issues in the kernel docs, adds a
helper to count the number of resets on a device for the non-DT case
as well, adds an early reset driver for SoCFPGA and simple reset driver
support for Stratix10, and generalizes the uniphier USB3 glue layer
reset to also cover AHCI.
* tag 'reset-for-5.0-rc2' of git://git.pengutronix.de/git/pza/linux:
reset: uniphier-glue: Add AHCI reset control support in glue layer
dt-bindings: reset: uniphier: Add AHCI core reset description
reset: uniphier-usb3: Rename to reset-uniphier-glue
dt-bindings: reset: uniphier: Replace the expression of USB3 with generic peripherals
ARM: socfpga: dts: document "altr,stratix10-rst-mgr" binding
reset: socfpga: add an early reset driver for SoCFPGA
reset: fix null pointer dereference on dev by dev_name
reset: Add reset_control_get_count()
reset: Improve reset controller kernel docs
ARC: HSDK: improve reset driver
Signed-off-by: Olof Johansson <olof@lixom.net>
Commit 49e54187ae ("ata: libahci_platform: comply to PHY framework") uses
the PHY_MODE_SATA, but that enum had not yet been added. This caused a
build failure for me, with today's linux.git.
Also, there is a potentially conflicting (mis-named) PHY_MODE_SATA, hiding
in the Marvell Berlin SATA PHY driver.
Fix the build by:
1) Renaming Marvell's defined value to a more scoped name,
in order to avoid any potential conflicts: PHY_BERLIN_MODE_SATA.
2) Adding the missing enum, which was going to be added anyway as part
of [1].
[1] https://lkml.kernel.org/r/20190108163124.6409-3-miquel.raynal@bootlin.com
Fixes: 49e54187ae ("ata: libahci_platform: comply to PHY framework")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Acked-by: Olof Johansson <olof@lixom.net>
Cc: Grzegorz Jaszczyk <jaz@semihalf.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull dma_zalloc_coherent() removal from Christoph Hellwig:
"We've always had a weird situation around dma_zalloc_coherent. To
safely support mapping the allocations to userspace major
architectures like x86 and arm have always zeroed allocations from
dma_alloc_coherent, but a couple other architectures were missing that
zeroing either always or in corner cases.
Then later we grew anothe dma_zalloc_coherent interface to explicitly
request zeroing, but that just added __GFP_ZERO to the allocation
flags, which for some allocators that didn't end up using the page
allocator ended up being a no-op and still not zeroing the
allocations.
So for this merge window I fixed up all remaining architectures to
zero the memory in dma_alloc_coherent, and made dma_zalloc_coherent a
no-op wrapper around dma_alloc_coherent, which fixes all of the above
issues.
dma_zalloc_coherent is now pointless and can go away, and Luis helped
me writing a cocchinelle script and patch series to kill it, which I
think we should apply now just after -rc1 to finally settle these
issue"
* tag 'remove-dma_zalloc_coherent-5.0' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: remove dma_zalloc_coherent()
cross-tree: phase out dma_zalloc_coherent() on headers
cross-tree: phase out dma_zalloc_coherent()
Pull more drm fixes from Daniel Vetter:
"Dave sends out his pull, everybody remembers holidays are over :-)
Since Dave's already in weekend mode and it was quite a few patches I
figured better to apply all the pulls and forward them to you. Hence
here 2nd part of bugfixes for -rc2.
nouveau:
- backlight fix
- falcon register access fix
- fan fix.
i915:
- Disable PSR for Apple panels
- Broxton ERR_PTR error state fix
- Kabylake VECS workaround fix
- Unwind failure on pinning the gen7 ppgtt
- GVT workload request allocation fix
core:
- Fix fb-helper to work correctly with SDL 1.2 bugs
- Fix lockdep warning in the atomic ioctl and setproperty"
* tag 'drm-fixes-2019-01-11-1' of git://anongit.freedesktop.org/drm/drm:
drm/nouveau/falcon: avoid touching registers if engine is off
drm/nouveau: Don't disable polling in fallback mode
drm/nouveau: register backlight on pascal and newer
drm: Fix documentation generation for DP_DPCD_QUIRK_NO_PSR
drm/i915: init per-engine WAs for all engines
drm/i915: Unwind failure on pinning the gen7 ppgtt
drm/i915: Skip the ERR_PTR error state
drm/i915: Disable PSR in Apple panels
gpu/drm: Fix lock held when returning to user space.
drm/fb-helper: Ignore the value of fb_var_screeninfo.pixclock
drm/fb-helper: Partially bring back workaround for bugs of SDL 1.2
drm/i915/gvt: Fix workload request allocation before request add
The bpfilter_umh will be stopped via __stop_umh() when the bpfilter
error occurred.
The bpfilter_umh() couldn't start again because there is no restart
routine.
The section of the bpfilter_umh_{start/end} is no longer .init.rodata
because these area should be reused in the restart routine. hence
the section name is changed to .bpfilter_umh.
The bpfilter_ops->start() is restart callback. it will be called when
bpfilter_umh is stopped.
The stop bit means bpfilter_umh is stopped. this bit is set by both
start and stop routine.
Before this patch,
Test commands:
$ iptables -vnL
$ kill -9 <pid of bpfilter_umh>
$ iptables -vnL
[ 480.045136] bpfilter: write fail -32
$ iptables -vnL
All iptables commands will fail.
After this patch,
Test commands:
$ iptables -vnL
$ kill -9 <pid of bpfilter_umh>
$ iptables -vnL
$ iptables -vnL
Now, all iptables commands will work.
Fixes: d2ba09c17a ("net: add skeleton of bpfilter kernel module")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now, UMH process is killed, do_exit() calls the umh_info->cleanup callback
to release members of the umh_info.
This patch makes bpfilter_umh's cleanup routine to use the
umh_info->cleanup callback.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A UMH process which is created by the fork_usermode_blob() such as
bpfilter needs to release members of the umh_info when process is
terminated.
But the do_exit() does not release members of the umh_info. hence module
which uses UMH needs own code to detect whether UMH process is
terminated or not.
But this implementation needs extra code for checking the status of
UMH process. it eventually makes the code more complex.
The new PF_UMH flag is added and it is used to identify UMH processes.
The exit_umh() does not release members of the umh_info.
Hence umh_info->cleanup callback should release both members of the
umh_info and the private data.
Suggested-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull ceph updates from Ilya Dryomov:
"A patch to allow setting abort_on_full and a fix for an old "rbd
unmap" edge case, marked for stable"
* tag 'ceph-for-5.0-rc2' of git://github.com/ceph/ceph-client:
rbd: don't return 0 on unmap if RBD_DEV_FLAG_REMOVING is set
ceph: use vmf_error() in ceph_filemap_fault()
libceph: allow setting abort_on_full for rbd
Pull x86 fixes from Ingo Molnar:
"A 32-bit build fix, CONFIG_RETPOLINE fixes and rename CONFIG_RESCTRL
to CONFIG_X86_RESCTRL"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, modpost: Replace last remnants of RETPOLINE with CONFIG_RETPOLINE
x86/cache: Rename config option to CONFIG_X86_RESCTRL
samples/seccomp: Fix 32-bit build
Pull power management updates from Rafael Wysocki:
"These fix fallout after starting to use hrtimers in the runtime PM
framework, fix a few cpufreq issues, fix a recently broken reference
to cpuidle documentation, update MAINTAINERS entries for cpufreq and
cpuidle and make the recently added system suspend and resume support
in devfreq actually work.
Specifics:
- Prevent integer overflows from occurring on 32-bit when converting
milliseconds to nanoseconds in the runtime PM framework and update
comments that still refer to jiffies in it (Vincent Guittot,
Ladislav Michl).
- Fix the SCMI cpufreq driver to always use the same frequency units
for arch_set_freq_scale() and make the scale-invariant load
tracking acutally work with this driver (Quentin Perret).
- Fix freeing of dynamic OPPs in the SCPI and SCMI cpufreq drivers
broken during the 4.20 defelopment cycle (Viresh Kumar).
- Prevent the cpufreq core from attempting to return the current
frequency of offline CPUs (Sudeep Holla).
- Add devfreq suspend and resume hooks (missed previously) to the PM
core to make the recently added system suspend and resume support
in devfreq actually work (Lukasz Luba).
- Update MAINTAINERS entries for cpufreq and cpuidle, mostly to add
references to new/current documentation to them (Rafael Wysocki).
- Fix a recently broken reference to cpuidle documentation (Otto
Sabart)"
* tag 'pm-5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM-runtime: Fix autosuspend_delay on 32bits arch
PM-runtime: Fix 'jiffies' in comments after switch to hrtimers
cpufreq: scmi: Fix frequency invariance in slow path
doc: trace: fix reference to cpuidle documentation file
cpufreq: check if policy is inactive early in __cpufreq_get()
cpufreq: scpi/scmi: Fix freeing of dynamic OPPs
cpuidle / Documentation: Update cpuidle MAINTAINERS entry
cpufreq / Documentation: Update cpufreq MAINTAINERS entry
PM: sleep: call devfreq suspend/resume
