Commit Graph

124961 Commits

Author SHA1 Message Date
Laurent Pinchart
e9a66489c3 media: doc: pixfmt-rgb: Clarify naming scheme for RGB formats
The naming scheme for the RGB pixel formats has been developed
organically, and isn't consistent between formats using less than 8 bits
per pixels (mostly stored in 1 or 2 bytes per pixel, except for RGB666
that uses 4 bytes per pixel) and formats with 8 bits per pixel (stored
in 3 or 4 bytes). For the latter category, the names use a components
order convention that is the opposite of the first category, and the
opposite of DRM pixel formats. This has led to lots of confusion in the
past, and would really benefit from being explained more precisely. Do
so, which also prepares for the addition of additional RGB pixels
formats.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07 14:02:37 +01:00
Laurent Pinchart
473dbed54f media: videodev2.h: Move HM12 format to YUV semi-planar section
V4L2_PIX_FMT_HM12 is a YUV semi-planar macro-block format. Move it from
the packed YUV formats section where it was misplaced to the YUV
semi-planar formats section.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07 13:59:24 +01:00
Laurent Pinchart
0a078e0d8e media: videodev2.h: Move HI240 format to vendor-specific section
V4L2_PIX_FMT_HI240 is a 8-bit dithered RGB format specific to BTTV. Move
it from the packed YUV formats section where it was misplaced to the
vendor-specific formats section.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07 13:58:16 +01:00
Laurent Pinchart
3771c031d6 media: videodev2.h: Remove unneeded comment about 4CC value
The V4L2_PIX_FMT_BGRA444 format has a comment that explains why its 4CC
value is GA12. This explains the development history and isn't of much
interest to readers, it should have been part of a commit message
instead. Drop the comment, anyone interested in history can turn to git.

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07 13:57:36 +01:00
Jonas Karlman
d5da31f902 media: rc: add keymap for pine64 remote
Add a keymap for the pine64 IR remote [0]. The mouse key has been mapped to
KEY_EPG to provide a more useful remote.

[0] http://files.pine64.org/doc/Pine%20A64%20Schematic/remote-wit-logo.jpg

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-07 13:51:59 +01:00
Hans Verkuil
206bc0f6fb media: vicodec: mark the stateless FWHT API as stable
The FWHT stateless 'uAPI' was staging and marked explicitly in the
V4L2 specification that it will change and is unstable.
Note that these control IDs were never exported as a public API,
they were only defined in kernel-local headers (fwht-ctrls.h).

Now, the FWHT stateless controls is ready to be part
of the stable uAPI.

While not too late:

- Rename V4L2_CID_MPEG_VIDEO_FWHT_PARAMS to V4L2_CID_STATELESS_FWHT_PARAMS.

- Move the contents of fwht-ctrls.h to v4l2-controls.h.

- Move the public parts of drivers/media/test-drivers/vicodec/codec-fwht.h
  to v4l2-controls.h.

- Add V4L2_CTRL_TYPE_FWHT_PARAMS control initialization and validation.

- Add p_fwht_params to struct v4l2_ext_control.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03 12:27:33 +01:00
Ezequiel Garcia
46a309d275 media: uapi: move H264 stateless controls out of staging
The H.264 stateless 'uAPI' was staging and marked explicitly in the
V4L2 specification that it will change and is unstable.

Note that these control IDs were never exported as a public API,
they were only defined in kernel-local headers (h264-ctrls.h).

Now, the H264 stateless controls is ready to be part
of the stable uAPI.

While not too late, let's rename them and re-number their
control IDs, moving them to the newly created stateless
control class, and updating all the drivers accordingly.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03 12:27:33 +01:00
Ezequiel Garcia
a7ead39700 media: uapi: Move the H264 stateless control types out of staging
Move the H264 stateless control types out of staging,
and re-number them to avoid any confusion.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03 12:27:33 +01:00
Ezequiel Garcia
95e95ebe91 media: uapi: Move parsed H264 pixel format out of staging
Since we are ready to stabilize the H264 stateless API,
start by first moving the parsed H264 pixel format.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03 12:27:33 +01:00
Ezequiel Garcia
008d2bd6e9 media: controls: Add the stateless codec control class
Add a new control class to hold the stateless codecs controls
that are ready to be moved out of staging.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03 12:27:33 +01:00
Ezequiel Garcia
b32e48503d media: controls: Validate H264 stateless controls
Check that all the fields that correspond or are related
to a H264 specification syntax element have legal values.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03 12:27:33 +01:00
Ezequiel Garcia
8917a5f61e media: Clean stateless control includes
Avoid including h264-ctrls.h, vp8-ctrls.h, etc,
and instead just include v4l2-ctrls.h which does the right
thing.

This is in preparation for moving the stateless controls
out of staging, which will mean removing some of these headers.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03 12:27:33 +01:00
Ezequiel Garcia
35aaa6e650 media: Rename stateful codec control macros
For historical reasons, stateful codec controls are named
as {}_MPEG_{}. While we can't at this point sanely
change all control IDs (such as V4L2_CID_MPEG_VIDEO_VP8_FRAME_HEADER),
we can least change the more meaningful macros such as classes
macros.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03 12:27:32 +01:00
Emmanuel Gil Peyrot
8d48b61168 media: uapi: Expose VP8 probability lengths as defines
These values will be used by various drivers implementing the VP8
stateless API.

This had been suggested by Ezequiel Garcia for the Cedrus VP8 driver.

Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03 07:42:54 +01:00
Fabio Estevam
41a3409418 media: coda: Convert the driver to DT-only
Since 5.10-rc1 i.MX is a devicetree-only platform, so simplify the code
by removing the unused non-DT support.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-03 07:37:59 +01:00
Niklas Söderlund
0ae426ebd0 media: v4l2-fwnode: Remove v4l2_async_notifier_parse_fwnode_endpoints_by_port()
There are no users left of this helper and as it implements an
undesirable and too simple behaviour that should instead be implemented
directly by drivers remove it to prevent future uses of it.

Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-12-02 16:13:59 +01:00
Mauro Carvalho Chehab
67e061f044 Merge tag 'v5.10-rc6' into patchwork
Linux 5.10-rc6

* tag 'v5.10-rc6': (1815 commits)
  Linux 5.10-rc6
  sock: set sk_err to ee_errno on dequeue from errq
  mptcp: fix NULL ptr dereference on bad MPJ
  net: openvswitch: fix TTL decrement action netlink message format
  perf probe: Change function definition check due to broken DWARF
  perf probe: Fix to die_entrypc() returns error correctly
  perf stat: Use proper cpu for shadow stats
  perf record: Synthesize cgroup events only if needed
  perf diff: Fix error return value in __cmd_diff()
  perf tools: Update copy of libbpf's hashmap.c
  x86/mce: Do not overwrite no_way_out if mce_end() fails
  kvm: x86/mmu: Fix get_mmio_spte() on CPUs supporting 5-level PT
  KVM: x86: Fix split-irqchip vs interrupt injection window request
  KVM: x86: handle !lapic_in_kernel case in kvm_cpu_*_extint
  usb: typec: stusb160x: fix power-opmode property with typec-power-opmode
  printk: finalize records with trailing newlines
  can: af_can: can_rx_unregister(): remove WARN() statement from list operation sanity check
  can: m_can: m_can_dev_setup(): add support for bosch mcan version 3.3.0
  can: m_can: fix nominal bitiming tseg2 min for version >= 3.1
  can: m_can: m_can_open(): remove IRQF_TRIGGER_FALLING from request_threaded_irq()'s flags
  ...
2020-12-01 16:21:40 +01:00
Linus Torvalds
c84e1efae0 Merge tag 'asm-generic-fixes-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic fix from Arnd Bergmann:
 "Add correct MAX_POSSIBLE_PHYSMEM_BITS setting to asm-generic.

  This is a single bugfix for a bug that Stefan Agner found on 32-bit
  Arm, but that exists on several other architectures"

* tag 'asm-generic-fixes-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  arch: pgtable: define MAX_POSSIBLE_PHYSMEM_BITS where needed
2020-11-27 15:00:35 -08:00
Linus Torvalds
303bc93472 Merge tag 'arm-soc-fixes-v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
 "Another set of patches for devicetree files and Arm SoC specific
  drivers:

   - A fix for OP-TEE shared memory on non-SMP systems

   - multiple code fixes for the OMAP platform, including one regression
     for the CPSW network driver and a few runtime warning fixes

   - Some DT patches for the Rockchip RK3399 platform, in particular
     fixing the MMC device ordering that recently became
     nondeterministic with async probe.

   - Multiple DT fixes for the Tegra platform, including a regression
     fix for suspend/resume on TX2

   - A regression fix for a user-triggered fault in the NXP dpio driver

   - A regression fix for a bug caused by an earlier bug fix in the
     xilinx firmware driver

   - Two more DTC warning fixes

   - Sylvain Lemieux steps down as maintainer for the NXP LPC32xx
     platform"

* tag 'arm-soc-fixes-v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
  arm64: tegra: Fix Tegra234 VDK node names
  arm64: tegra: Wrong AON HSP reg property size
  arm64: tegra: Fix USB_VBUS_EN0 regulator on Jetson TX1
  arm64: tegra: Correct the UART for Jetson Xavier NX
  arm64: tegra: Disable the ACONNECT for Jetson TX2
  optee: add writeback to valid memory type
  firmware: xilinx: Use hash-table for api feature check
  firmware: xilinx: Fix SD DLL node reset issue
  soc: fsl: dpio: Get the cpumask through cpumask_of(cpu)
  ARM: dts: dra76x: m_can: fix order of clocks
  bus: ti-sysc: suppress err msg for timers used as clockevent/source
  MAINTAINERS: Remove myself as LPC32xx maintainers
  arm64: dts: qcom: clear the warnings caused by empty dma-ranges
  arm64: dts: broadcom: clear the warnings caused by empty dma-ranges
  ARM: dts: am437x-l4: fix compatible for cpsw switch dt node
  arm64: dts: rockchip: Reorder LED triggers from mmc devices on rk3399-roc-pc.
  arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards.
  arm64: dts: rockchip: Remove system-power-controller from pmic on Odroid Go Advance
  arm64: dts: rockchip: fix NanoPi R2S GMAC clock name
  ARM: OMAP2+: Manage MPU state properly for omap_enter_idle_coupled()
  ...
2020-11-27 14:48:03 -08:00
Linus Torvalds
79c0c1f038 Merge tag 'net-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
 "Networking fixes for 5.10-rc6, including fixes from the WiFi driver,
  and CAN subtrees.

  Current release - regressions:

   - gro_cells: reduce number of synchronize_net() calls

   - ch_ktls: release a lock before jumping to an error path

  Current release - always broken:

   - tcp: Allow full IP tos/IPv6 tclass to be reflected in L3 header

  Previous release - regressions:

   - net/tls: fix missing received data after fast remote close

   - vsock/virtio: discard packets only when socket is really closed

   - sock: set sk_err to ee_errno on dequeue from errq

   - cxgb4: fix the panic caused by non smac rewrite

  Previous release - always broken:

   - tcp: fix corner cases around setting ECN with BPF selection of
     congestion control

   - tcp: fix race condition when creating child sockets from syncookies
     on loopback interface

   - usbnet: ipheth: fix connectivity with iOS 14

   - tun: honor IOCB_NOWAIT flag

   - net/packet: fix packet receive on L3 devices without visible hard
     header

   - devlink: Make sure devlink instance and port are in same net
     namespace

   - net: openvswitch: fix TTL decrement action netlink message format

   - bonding: wait for sysfs kobject destruction before freeing struct
     slave

   - net: stmmac: fix upstream patch applied to the wrong context

   - bnxt_en: fix return value and unwind in probe error paths

  Misc:

   - devlink: add extra layer of categorization to the reload stats uAPI
     before it's released"

* tag 'net-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (68 commits)
  sock: set sk_err to ee_errno on dequeue from errq
  mptcp: fix NULL ptr dereference on bad MPJ
  net: openvswitch: fix TTL decrement action netlink message format
  can: af_can: can_rx_unregister(): remove WARN() statement from list operation sanity check
  can: m_can: m_can_dev_setup(): add support for bosch mcan version 3.3.0
  can: m_can: fix nominal bitiming tseg2 min for version >= 3.1
  can: m_can: m_can_open(): remove IRQF_TRIGGER_FALLING from request_threaded_irq()'s flags
  can: mcp251xfd: mcp251xfd_probe(): bail out if no IRQ was given
  can: gs_usb: fix endianess problem with candleLight firmware
  ch_ktls: lock is not freed
  net/tls: Protect from calling tls_dev_del for TLS RX twice
  devlink: Make sure devlink instance and port are in same net namespace
  devlink: Hold rtnl lock while reading netdev attributes
  ptp: clockmatrix: bug fix for idtcm_strverscmp
  enetc: Let the hardware auto-advance the taprio base-time of 0
  gro_cells: reduce number of synchronize_net() calls
  net: stmmac: fix incorrect merge of patch upstream
  ipv6: addrlabel: fix possible memory leak in ip6addrlbl_net_init
  Documentation: netdev-FAQ: suggest how to post co-dependent series
  ibmvnic: enhance resetting status check during module exit
  ...
2020-11-27 14:38:02 -08:00
Eelco Chaudron
69929d4c49 net: openvswitch: fix TTL decrement action netlink message format
Currently, the openvswitch module is not accepting the correctly formated
netlink message for the TTL decrement action. For both setting and getting
the dec_ttl action, the actions should be nested in the
OVS_DEC_TTL_ATTR_ACTION attribute as mentioned in the openvswitch.h uapi.

When the original patch was sent, it was tested with a private OVS userspace
implementation. This implementation was unfortunately not upstreamed and
reviewed, hence an erroneous version of this patch was sent out.

Leaving the patch as-is would cause problems as the kernel module could
interpret additional attributes as actions and vice-versa, due to the
actions not being encapsulated/nested within the actual attribute, but
being concatinated after it.

Fixes: 744676e777 ("openvswitch: add TTL decrement action")
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/160622121495.27296.888010441924340582.stgit@wsfd-netdev64.ntdv.lab.eng.bos.redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-27 11:03:06 -08:00
Linus Torvalds
5b4049d8fc Merge tag 'writeback_for_v5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull writeback fix from Jan Kara:
 "A fix of possible missing string termination in writeback tracepoints"

* tag 'writeback_for_v5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  trace: fix potenial dangerous pointer
2020-11-27 10:36:38 -08:00
Arnd Bergmann
454a079b38 Merge tag 'omap-for-v5.10/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps for various issues noticed during the -rc cycle:

- Earlier omap4 cpuidle fix was incomplete and needs to use a
  configured idle state instead

- Fix am4 cpsw driver compatible to avoid invalid resource error
  for the legacy driver

- Two kconfig fixes for genpd support that we added for for v5.10
  for proper location of the option and adding missing option

- Fix ti-sysc reset status checking on enabling modules to ignore
  quirky modules with reset status only usable when the quirk is
  activated during reset. Also fix bogus resetdone warning for
  cpsw and modules with no sysst register reset status bit

- Suppress a ti-sysc warning for timers reserved as system timers

- Fix the ordering of clocks for dra7 m_can

* tag 'omap-for-v5.10/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: dra76x: m_can: fix order of clocks
  bus: ti-sysc: suppress err msg for timers used as clockevent/source
  ARM: dts: am437x-l4: fix compatible for cpsw switch dt node
  ARM: OMAP2+: Manage MPU state properly for omap_enter_idle_coupled()
  bus: ti-sysc: Fix bogus resetdone warning on enable for cpsw
  bus: ti-sysc: Fix reset status check for modules with quirks
  ARM: OMAP2+: Fix missing select PM_GENERIC_DOMAINS_OF
  ARM: OMAP2+: Fix location for select PM_GENERIC_DOMAINS

Link: https://lore.kernel.org/r/pull-1606460270-864284@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-11-27 13:18:40 +01:00
Feng Tang
4df910620b mm: memcg: relayout structure mem_cgroup to avoid cache interference
0day reported one -22.7% regression for will-it-scale page_fault2
case [1] on a 4 sockets 144 CPU platform, and bisected to it to be
caused by Waiman's optimization (commit bd0b230fe1) of saving one
'struct page_counter' space for 'struct mem_cgroup'.

Initially we thought it was due to the cache alignment change introduced
by the patch, but further debug shows that it is due to some hot data
members ('vmstats_local', 'vmstats_percpu', 'vmstats') sit in 2 adjacent
cacheline (2N and 2N+1 cacheline), and when adjacent cache line prefetch
is enabled, it triggers an "extended level" of cache false sharing for
2 adjacent cache lines.

So exchange the 2 member blocks, while keeping mostly the original
cache alignment, which can restore and even enhance the performance,
and save 64 bytes of space for 'struct mem_cgroup' (from 2880 to 2816,
with 0day's default RHEL-8.3 kernel config)

[1]. https://lore.kernel.org/lkml/20201102091543.GM31092@shao2-debian/

Fixes: bd0b230fe1 ("mm/memcg: unify swap and memsw page counters")
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-26 09:35:49 -08:00
Christian Hewitt
2a14dfaffe media: rc: add keymap for KHAMSIN remote
This remote ships with the Amlogic SML-5442TW IPTV/VOD Set-Top Box
used by O2.cz. This keymap adds support for the default IR controls.

Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-26 14:28:10 +01:00
Mauro Carvalho Chehab
4fe21dec6c media: rc: improve LIRC documentation
Add documentation for enum rc_proto and struct lirc_scancode
at the generated docs.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
2020-11-26 14:19:10 +01:00
Maxim Mikityanskiy
025cc2fb6a net/tls: Protect from calling tls_dev_del for TLS RX twice
tls_device_offload_cleanup_rx doesn't clear tls_ctx->netdev after
calling tls_dev_del if TLX TX offload is also enabled. Clearing
tls_ctx->netdev gets postponed until tls_device_gc_task. It leaves a
time frame when tls_device_down may get called and call tls_dev_del for
RX one extra time, confusing the driver, which may lead to a crash.

This patch corrects this racy behavior by adding a flag to prevent
tls_device_down from calling tls_dev_del the second time.

Fixes: e8f6979981 ("net/tls: Add generic NIC offload infrastructure")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20201125221810.69870-1-saeedm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-25 17:31:06 -08:00
Sean Young
cea357bc25 media: lirc: ensure RC_PROTO_MAX has documentation
The enum rc_proto value RC_PROTO_MAX has no documentation, this is causing
a warning while building the documentation.

Fixes: 72e637fec5 ("media: rc: validate that "rc_proto" is reasonable")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-11-25 14:52:04 +01:00
Hui Su
fdeb17c70c trace: fix potenial dangerous pointer
The bdi_dev_name() returns a char [64], and
the __entry->name is a char [32].

It maybe dangerous to TP_printk("%s", __entry->name)
after the strncpy().

CC: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20201124165205.GA23937@rlk
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Hui Su <sh_def@163.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2020-11-25 13:03:44 +01:00
Moshe Shemesh
5204bb683c devlink: Fix reload stats structure
Fix reload stats structure exposed to the user. Change stats structure
hierarchy to have the reload action as a parent of the stat entry and
then stat entry includes value per limit. This will also help to avoid
string concatenation on iproute2 output.

Reload stats structure before this fix:
"stats": {
    "reload": {
        "driver_reinit": 2,
        "fw_activate": 1,
        "fw_activate_no_reset": 0
     }
}

After this fix:
"stats": {
    "reload": {
        "driver_reinit": {
            "unspecified": 2
        },
        "fw_activate": {
            "unspecified": 1,
            "no_reset": 0
        }
}

Fixes: a254c26426 ("devlink: Add reload stats")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/1606109785-25197-1-git-send-email-moshe@mellanox.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-24 13:04:04 -08:00
Amit Sunil Dhamne
acfdd18591 firmware: xilinx: Use hash-table for api feature check
Currently array of fix length PM_API_MAX is used to cache
the pm_api version (valid or invalid). However ATF based
PM APIs values are much higher then PM_API_MAX.
So to include ATF based PM APIs also, use hash-table to
store the pm_api version status.

Signed-off-by: Amit Sunil Dhamne <amit.sunil.dhamne@xilinx.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ravi Patel <ravi.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Michal Simek <michal.simek@xilinx.com>
Fixes: f3217d6f2f ("firmware: xilinx: fix out-of-bounds access")
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1606197161-25976-1-git-send-email-rajan.vaja@xilinx.com
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2020-11-24 15:13:54 +01:00
Eyal Birger
d549699048 net/packet: fix packet receive on L3 devices without visible hard header
In the patchset merged by commit b9fcf0a0d8
("Merge branch 'support-AF_PACKET-for-layer-3-devices'") L3 devices which
did not have header_ops were given one for the purpose of protocol parsing
on af_packet transmit path.

That change made af_packet receive path regard these devices as having a
visible L3 header and therefore aligned incoming skb->data to point to the
skb's mac_header. Some devices, such as ipip, xfrmi, and others, do not
reset their mac_header prior to ingress and therefore their incoming
packets became malformed.

Ideally these devices would reset their mac headers, or af_packet would be
able to rely on dev->hard_header_len being 0 for such cases, but it seems
this is not the case.

Fix by changing af_packet RX ll visibility criteria to include the
existence of a '.create()' header operation, which is used when creating
a device hard header - via dev_hard_header() - by upper layers, and does
not exist in these L3 devices.

As this predicate may be useful in other situations, add it as a common
dev_has_header() helper in netdevice.h.

Fixes: b9fcf0a0d8 ("Merge branch 'support-AF_PACKET-for-layer-3-devices'")
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20201121062817.3178900-1-eyal.birger@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-23 17:29:36 -08:00
Ricardo Dias
01770a1661 tcp: fix race condition when creating child sockets from syncookies
When the TCP stack is in SYN flood mode, the server child socket is
created from the SYN cookie received in a TCP packet with the ACK flag
set.

The child socket is created when the server receives the first TCP
packet with a valid SYN cookie from the client. Usually, this packet
corresponds to the final step of the TCP 3-way handshake, the ACK
packet. But is also possible to receive a valid SYN cookie from the
first TCP data packet sent by the client, and thus create a child socket
from that SYN cookie.

Since a client socket is ready to send data as soon as it receives the
SYN+ACK packet from the server, the client can send the ACK packet (sent
by the TCP stack code), and the first data packet (sent by the userspace
program) almost at the same time, and thus the server will equally
receive the two TCP packets with valid SYN cookies almost at the same
instant.

When such event happens, the TCP stack code has a race condition that
occurs between the momement a lookup is done to the established
connections hashtable to check for the existence of a connection for the
same client, and the moment that the child socket is added to the
established connections hashtable. As a consequence, this race condition
can lead to a situation where we add two child sockets to the
established connections hashtable and deliver two sockets to the
userspace program to the same client.

This patch fixes the race condition by checking if an existing child
socket exists for the same client when we are adding the second child
socket to the established connections socket. If an existing child
socket exists, we drop the packet and discard the second child socket
to the same client.

Signed-off-by: Ricardo Dias <rdias@singlestore.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20201120111133.GA67501@rdias-suse-pc.lan
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-23 16:32:33 -08:00
Linus Torvalds
f4b936f5d6 Merge tag 'sched-urgent-2020-11-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
 "A couple of scheduler fixes:

   - Make the conditional update of the overutilized state work
     correctly by caching the relevant flags state before overwriting
     them and checking them afterwards.

   - Fix a data race in the wakeup path which caused loadavg on ARM64
     platforms to become a random number generator.

   - Fix the ordering of the iowaiter accounting operations so it can't
     be decremented before it is incremented.

   - Fix a bug in the deadline scheduler vs. priority inheritance when a
     non-deadline task A has inherited the parameters of a deadline task
     B and then blocks on a non-deadline task C.

     The second inheritance step used the static deadline parameters of
     task A, which are usually 0, instead of further propagating task
     B's parameters. The zero initialized parameters trigger a bug in
     the deadline scheduler"

* tag 'sched-urgent-2020-11-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/deadline: Fix priority inheritance with multiple scheduling classes
  sched: Fix rq->nr_iowait ordering
  sched: Fix data-race in wakeup
  sched/fair: Fix overutilized update in enqueue_task_fair()
2020-11-22 13:26:07 -08:00
Linus Torvalds
4a51c60a11 Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
 "8 patches.

  Subsystems affected by this patch series: mm (madvise, pagemap,
  readahead, memcg, userfaultfd), kbuild, and vfs"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  mm: fix madvise WILLNEED performance problem
  libfs: fix error cast of negative value in simple_attr_write()
  mm/userfaultfd: do not access vma->vm_mm after calling handle_userfault()
  mm: memcg/slab: fix root memcg vmstats
  mm: fix readahead_page_batch for retry entries
  mm: fix phys_to_target_node() and memory_add_physaddr_to_nid() exports
  compiler-clang: remove version check for BPF Tracing
  mm/madvise: fix memory leak from process_madvise
2020-11-22 12:14:46 -08:00
Linus Torvalds
a7f07fc14f Merge tag 'ext4_for_linus_fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
 "A final set of miscellaneous bug fixes for ext4"

* tag 'ext4_for_linus_fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix bogus warning in ext4_update_dx_flag()
  jbd2: fix kernel-doc markups
  ext4: drop fast_commit from /proc/mounts
2020-11-22 11:39:32 -08:00
Matthew Wilcox (Oracle)
4349a83a31 mm: fix readahead_page_batch for retry entries
Both btrfs and fuse have reported faults caused by seeing a retry entry
instead of the page they were looking for.  This was caused by a missing
check in the iterator.

As can be seen in the below panic log, the accessing 0x402 causes a
panic.  In the xarray.h, 0x402 means RETRY_ENTRY.

  BUG: kernel NULL pointer dereference, address: 0000000000000402
  CPU: 14 PID: 306003 Comm: as Not tainted 5.9.0-1-amd64 #1 Debian 5.9.1-1
  Hardware name: Lenovo ThinkSystem SR665/7D2VCTO1WW, BIOS D8E106Q-1.01 05/30/2020
  RIP: 0010:fuse_readahead+0x152/0x470 [fuse]
  Code: 41 8b 57 18 4c 8d 54 10 ff 4c 89 d6 48 8d 7c 24 10 e8 d2 e3 28 f9 48 85 c0 0f 84 fe 00 00 00 44 89 f2 49 89 04 d4 44 8d 72 01 <48> 8b 10 41 8b 4f 1c 48 c1 ea 10 83 e2 01 80 fa 01 19 d2 81 e2 01
  RSP: 0018:ffffad99ceaebc50 EFLAGS: 00010246
  RAX: 0000000000000402 RBX: 0000000000000001 RCX: 0000000000000002
  RDX: 0000000000000000 RSI: ffff94c5af90bd98 RDI: ffffad99ceaebc60
  RBP: ffff94ddc1749a00 R08: 0000000000000402 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000100 R12: ffff94de6c429ce0
  R13: ffff94de6c4d3700 R14: 0000000000000001 R15: ffffad99ceaebd68
  FS:  00007f228c5c7040(0000) GS:ffff94de8ed80000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000000402 CR3: 0000001dbd9b4000 CR4: 0000000000350ee0
  Call Trace:
    read_pages+0x83/0x270
    page_cache_readahead_unbounded+0x197/0x230
    generic_file_buffered_read+0x57a/0xa20
    new_sync_read+0x112/0x1a0
    vfs_read+0xf8/0x180
    ksys_read+0x5f/0xe0
    do_syscall_64+0x33/0x80
    entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 042124cc64 ("mm: add new readahead_control API")
Reported-by: David Sterba <dsterba@suse.com>
Reported-by: Wonhyuk Yang <vvghjk1234@gmail.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201103142852.8543-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20201103124349.16722-1-vvghjk1234@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-22 10:48:22 -08:00
Dan Williams
a927bd6ba9 mm: fix phys_to_target_node() and memory_add_physaddr_to_nid() exports
The core-mm has a default __weak implementation of phys_to_target_node()
to mirror the weak definition of memory_add_physaddr_to_nid().  That
symbol is exported for modules.  However, while the export in
mm/memory_hotplug.c exported the symbol in the configuration cases of:

	CONFIG_NUMA_KEEP_MEMINFO=y
	CONFIG_MEMORY_HOTPLUG=y

...and:

	CONFIG_NUMA_KEEP_MEMINFO=n
	CONFIG_MEMORY_HOTPLUG=y

...it failed to export the symbol in the case of:

	CONFIG_NUMA_KEEP_MEMINFO=y
	CONFIG_MEMORY_HOTPLUG=n

Not only is that broken, but Christoph points out that the kernel should
not be exporting any __weak symbol, which means that
memory_add_physaddr_to_nid() example that phys_to_target_node() copied
is broken too.

Rework the definition of phys_to_target_node() and
memory_add_physaddr_to_nid() to not require weak symbols.  Move to the
common arch override design-pattern of an asm header defining a symbol
to replace the default implementation.

The only common header that all memory_add_physaddr_to_nid() producing
architectures implement is asm/sparsemem.h.  In fact, powerpc already
defines its memory_add_physaddr_to_nid() helper in sparsemem.h.
Double-down on that observation and define phys_to_target_node() where
necessary in asm/sparsemem.h.  An alternate consideration that was
discarded was to put this override in asm/numa.h, but that entangles
with the definition of MAX_NUMNODES relative to the inclusion of
linux/nodemask.h, and requires powerpc to grow a new header.

The dependency on NUMA_KEEP_MEMINFO for DEV_DAX_HMEM_DEVICES is invalid
now that the symbol is properly exported / stubbed in all combinations
of CONFIG_NUMA_KEEP_MEMINFO and CONFIG_MEMORY_HOTPLUG.

[dan.j.williams@intel.com: v4]
  Link: https://lkml.kernel.org/r/160461461867.1505359.5301571728749534585.stgit@dwillia2-desk3.amr.corp.intel.com
[dan.j.williams@intel.com: powerpc: fix create_section_mapping compile warning]
  Link: https://lkml.kernel.org/r/160558386174.2948926.2740149041249041764.stgit@dwillia2-desk3.amr.corp.intel.com

Fixes: a035b6bf86 ("mm/memory_hotplug: introduce default phys_to_target_node() implementation")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lkml.kernel.org/r/160447639846.1133764.7044090803980177548.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-22 10:48:22 -08:00
Nick Desaulniers
bc2dc4406c compiler-clang: remove version check for BPF Tracing
bpftrace parses the kernel headers and uses Clang under the hood.

Remove the version check when __BPF_TRACING__ is defined (as bpftrace
does) so that this tool can continue to parse kernel headers, even with
older clang sources.

Fixes: commit 1f7a44f63e ("compiler-clang: add build check for clang 10.0.1")
Reported-by: Chen Yu <yu.chen.surf@gmail.com>
Reported-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://lkml.kernel.org/r/20201104191052.390657-1-ndesaulniers@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-11-22 10:48:22 -08:00
Jamie Iles
b9ad3e9f5a bonding: wait for sysfs kobject destruction before freeing struct slave
syzkaller found that with CONFIG_DEBUG_KOBJECT_RELEASE=y, releasing a
struct slave device could result in the following splat:

  kobject: 'bonding_slave' (00000000cecdd4fe): kobject_release, parent 0000000074ceb2b2 (delayed 1000)
  bond0 (unregistering): (slave bond_slave_1): Releasing backup interface
  ------------[ cut here ]------------
  ODEBUG: free active (active state 0) object type: timer_list hint: workqueue_select_cpu_near kernel/workqueue.c:1549 [inline]
  ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x98 kernel/workqueue.c:1600
  WARNING: CPU: 1 PID: 842 at lib/debugobjects.c:485 debug_print_object+0x180/0x240 lib/debugobjects.c:485
  Kernel panic - not syncing: panic_on_warn set ...
  CPU: 1 PID: 842 Comm: kworker/u4:4 Tainted: G S                5.9.0-rc8+ #96
  Hardware name: linux,dummy-virt (DT)
  Workqueue: netns cleanup_net
  Call trace:
   dump_backtrace+0x0/0x4d8 include/linux/bitmap.h:239
   show_stack+0x34/0x48 arch/arm64/kernel/traps.c:142
   __dump_stack lib/dump_stack.c:77 [inline]
   dump_stack+0x174/0x1f8 lib/dump_stack.c:118
   panic+0x360/0x7a0 kernel/panic.c:231
   __warn+0x244/0x2ec kernel/panic.c:600
   report_bug+0x240/0x398 lib/bug.c:198
   bug_handler+0x50/0xc0 arch/arm64/kernel/traps.c:974
   call_break_hook+0x160/0x1d8 arch/arm64/kernel/debug-monitors.c:322
   brk_handler+0x30/0xc0 arch/arm64/kernel/debug-monitors.c:329
   do_debug_exception+0x184/0x340 arch/arm64/mm/fault.c:864
   el1_dbg+0x48/0xb0 arch/arm64/kernel/entry-common.c:65
   el1_sync_handler+0x170/0x1c8 arch/arm64/kernel/entry-common.c:93
   el1_sync+0x80/0x100 arch/arm64/kernel/entry.S:594
   debug_print_object+0x180/0x240 lib/debugobjects.c:485
   __debug_check_no_obj_freed lib/debugobjects.c:967 [inline]
   debug_check_no_obj_freed+0x200/0x430 lib/debugobjects.c:998
   slab_free_hook mm/slub.c:1536 [inline]
   slab_free_freelist_hook+0x190/0x210 mm/slub.c:1577
   slab_free mm/slub.c:3138 [inline]
   kfree+0x13c/0x460 mm/slub.c:4119
   bond_free_slave+0x8c/0xf8 drivers/net/bonding/bond_main.c:1492
   __bond_release_one+0xe0c/0xec8 drivers/net/bonding/bond_main.c:2190
   bond_slave_netdev_event drivers/net/bonding/bond_main.c:3309 [inline]
   bond_netdev_event+0x8f0/0xa70 drivers/net/bonding/bond_main.c:3420
   notifier_call_chain+0xf0/0x200 kernel/notifier.c:83
   __raw_notifier_call_chain kernel/notifier.c:361 [inline]
   raw_notifier_call_chain+0x44/0x58 kernel/notifier.c:368
   call_netdevice_notifiers_info+0xbc/0x150 net/core/dev.c:2033
   call_netdevice_notifiers_extack net/core/dev.c:2045 [inline]
   call_netdevice_notifiers net/core/dev.c:2059 [inline]
   rollback_registered_many+0x6a4/0xec0 net/core/dev.c:9347
   unregister_netdevice_many.part.0+0x2c/0x1c0 net/core/dev.c:10509
   unregister_netdevice_many net/core/dev.c:10508 [inline]
   default_device_exit_batch+0x294/0x338 net/core/dev.c:10992
   ops_exit_list.isra.0+0xec/0x150 net/core/net_namespace.c:189
   cleanup_net+0x44c/0x888 net/core/net_namespace.c:603
   process_one_work+0x96c/0x18c0 kernel/workqueue.c:2269
   worker_thread+0x3f0/0xc30 kernel/workqueue.c:2415
   kthread+0x390/0x498 kernel/kthread.c:292
   ret_from_fork+0x10/0x18 arch/arm64/kernel/entry.S:925

This is a potential use-after-free if the sysfs nodes are being accessed
whilst removing the struct slave, so wait for the object destruction to
complete before freeing the struct slave itself.

Fixes: 07699f9a7c ("bonding: add sysfs /slave dir for bond slave devices.")
Fixes: a068aab422 ("bonding: Fix reference count leak in bond_sysfs_slave_add.")
Cc: Qiushi Wu <wu000273@umn.edu>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Jamie Iles <jamie@nuviainc.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20201120142827.879226-1-jamie@nuviainc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-21 13:07:00 -08:00
Linus Torvalds
27bba9c532 Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
 "Fixes for two fairly obscure but annoying when triggered races in
  iSCSI"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: target: iscsi: Fix cmd abort fabric stop race
  scsi: libiscsi: Fix NOP race condition
2020-11-20 16:24:28 -08:00
Linus Torvalds
fc8299f9f3 Merge tag 'iommu-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull iommu fixes from Will Deacon:
 "Two straightforward vt-d fixes:

   - Fix boot when intel iommu initialisation fails under TXT (tboot)

   - Fix intel iommu compilation error when DMAR is enabled without ATS

  and temporarily update IOMMU MAINTAINERs entry"

* tag 'iommu-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  MAINTAINERS: Temporarily add myself to the IOMMU entry
  iommu/vt-d: Fix compile error with CONFIG_PCI_ATS not set
  iommu/vt-d: Avoid panic if iommu init fails in tboot system
2020-11-20 10:20:16 -08:00
Linus Torvalds
e65b30951e Merge tag 'sound-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
 "A collection of small fixes: the only core change is a minor error
  code handling in the control API, and all the rest are device-specific
  fixes, mostly quirks, fixups and ASoC Intel fixes.

  It looks boring, and good so"

* tag 'sound-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: mixart: Fix mutex deadlock
  ALSA: hda/ca0132: Fix compile warning without PCI
  ASOC: Intel: kbl_rt5663_rt5514_max98927: Do not try to disable disabled clock
  ALSA: usb-audio: Add delay quirk for all Logitech USB devices
  ASoC: Intel: catpt: Correct clock selection for dai trigger
  ASoC: Intel: catpt: Skip position update for unprepared streams
  ASoC: qcom: lpass-platform: Fix memory leak
  ASoC: Intel: KMB: Fix S24_LE configuration
  ALSA: hda: Add Alderlake-S PCI ID and HDMI codec vid
  ALSA: usb-audio: Use ALC1220-VB-DT mapping for ASUS ROG Strix TRX40 mobo
  ALSA: firewire: Clean up a locking issue in copy_resp_to_buf()
  ASoC: rt1015: increase the time to detect BCLK
  ALSA: ctl: fix error path at adding user-defined element set
  ALSA: hda/realtek - HP Headset Mic can't detect after boot
  ALSA: hda/realtek - Add supported mute Led for HP
  ALSA: hda/realtek: Add some Clove SSID in the ALC293(ALC1220)
  ALSA: hda/realtek - Add supported for Lenovo ThinkPad Headset Button
  ASoC: rt1015: add delay to fix pop noise from speaker
2020-11-20 09:56:16 -08:00
Mauro Carvalho Chehab
2bf31d9442 jbd2: fix kernel-doc markups
Kernel-doc markup should use this format:
        identifier - description

They should not have any type before that, as otherwise
the parser won't do the right thing.

Also, some identifiers have different names between their
prototypes and the kernel-doc markup.

Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/72f5c6628f5f278d67625f60893ffbc2ca28d46e.1605521731.git.mchehab+huawei@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2020-11-19 22:38:29 -05:00
Linus Torvalds
4d02da974e Merge tag 'net-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
 "Networking fixes for 5.10-rc5, including fixes from the WiFi
  (mac80211), can and bpf (including the strncpy_from_user fix).

  Current release - regressions:

   - mac80211: fix memory leak of filtered powersave frames

   - mac80211: free sta in sta_info_insert_finish() on errors to avoid
     sleeping in atomic context

   - netlabel: fix an uninitialized variable warning added in -rc4

  Previous release - regressions:

   - vsock: forward all packets to the host when no H2G is registered,
     un-breaking AWS Nitro Enclaves

   - net: Exempt multicast addresses from five-second neighbor lifetime
     requirement, decreasing the chances neighbor tables fill up

   - net/tls: fix corrupted data in recvmsg

   - qed: fix ILT configuration of SRC block

   - can: m_can: process interrupt only when not runtime suspended

  Previous release - always broken:

   - page_frag: Recover from memory pressure by not recycling pages
     allocating from the reserves

   - strncpy_from_user: Mask out bytes after NUL terminator

   - ip_tunnels: Set tunnel option flag only when tunnel metadata is
     present, always setting it confuses Open vSwitch

   - bpf, sockmap:
      - Fix partial copy_page_to_iter so progress can still be made
      - Fix socket memory accounting and obeying SO_RCVBUF

   - net: Have netpoll bring-up DSA management interface

   - net: bridge: add missing counters to ndo_get_stats64 callback

   - tcp: brr: only postpone PROBE_RTT if RTT is < current min_rtt

   - enetc: Workaround MDIO register access HW bug

   - net/ncsi: move netlink family registration to a subsystem init,
     instead of tying it to driver probe

   - net: ftgmac100: unregister NC-SI when removing driver to avoid
     crash

   - lan743x:
      - prevent interrupt storm on open
      - fix freeing skbs in the wrong context

   - net/mlx5e: Fix socket refcount leak on kTLS RX resync

   - net: dsa: mv88e6xxx: Avoid VLAN database corruption on 6097

   - fix 21 unset return codes and other mistakes on error paths, mostly
     detected by the Hulk Robot"

* tag 'net-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (115 commits)
  fail_function: Remove a redundant mutex unlock
  selftest/bpf: Test bpf_probe_read_user_str() strips trailing bytes after NUL
  lib/strncpy_from_user.c: Mask out bytes after NUL terminator.
  net/smc: fix direct access to ib_gid_addr->ndev in smc_ib_determine_gid()
  net/smc: fix matching of existing link groups
  ipv6: Remove dependency of ipv6_frag_thdr_truncated on ipv6 module
  libbpf: Fix VERSIONED_SYM_COUNT number parsing
  net/mlx4_core: Fix init_hca fields offset
  atm: nicstar: Unmap DMA on send error
  page_frag: Recover from memory pressure
  net: dsa: mv88e6xxx: Wait for EEPROM done after HW reset
  mlxsw: core: Use variable timeout for EMAD retries
  mlxsw: Fix firmware flashing
  net: Have netpoll bring-up DSA management interface
  atl1e: fix error return code in atl1e_probe()
  atl1c: fix error return code in atl1c_probe()
  ah6: fix error return code in ah6_input()
  net: usb: qmi_wwan: Set DTR quirk for MR400
  can: m_can: process interrupt only when not runtime suspended
  can: flexcan: flexcan_chip_start(): fix erroneous flexcan_transceiver_enable() during bus-off recovery
  ...
2020-11-19 13:33:16 -08:00
Linus Torvalds
fee3c824ed Merge tag 'spi-fix-v5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
 "This is a relatively large set of fixes, the bulk of it being a series
  from Lukas Wunner which fixes confusion with the lifetime of driver
  data allocated along with the SPI controller structure that's been
  created as part of the conversion to devm APIs.

  The simplest fix, explained in detail in Lukas' commit message, is to
  move to a devm_ function for allocation of the controller and hence
  driver data in order to push the free of that after anything tries to
  reference the driver data in the remove path. This results in a
  relatively large diff due to the addition of a new function but isn't
  particularly complex.

  There's also a fix from Sven van Asbroeck which fixes yet more fallout
  from the conflicts between the various different places one can
  configure the polarity of GPIOs in modern systems.

  Otherwise everything is fairly small and driver specific"

* tag 'spi-fix-v5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: npcm-fiu: Don't leak SPI master in probe error path
  spi: dw: Set transfer handler before unmasking the IRQs
  spi: cadence-quadspi: Fix error return code in cqspi_probe
  spi: bcm2835aux: Restore err assignment in bcm2835aux_spi_probe
  spi: lpspi: Fix use-after-free on unbind
  spi: bcm-qspi: Fix use-after-free on unbind
  spi: bcm2835aux: Fix use-after-free on unbind
  spi: bcm2835: Fix use-after-free on unbind
  spi: Introduce device-managed SPI controller allocation
  spi: fsi: Fix transfer returning without finalizing message
  spi: fix client driver breakages when using GPIO descriptors
2020-11-19 11:05:28 -08:00
Takashi Iwai
aecd1fbe77 Merge tag 'asoc-fix-v5.10-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v5.11

A collection of driver specific fixes, mostly for x86 systems (or CODECs
used mostly on x86) and all for relatively minor issues, the biggest one
being fixing S24_LE format on Keem Bay systems.
2020-11-19 19:56:29 +01:00
Georg Kohmann
2d8f6481c1 ipv6: Remove dependency of ipv6_frag_thdr_truncated on ipv6 module
IPV6=m
NF_DEFRAG_IPV6=y

ld: net/ipv6/netfilter/nf_conntrack_reasm.o: in function
`nf_ct_frag6_gather':
net/ipv6/netfilter/nf_conntrack_reasm.c:462: undefined reference to
`ipv6_frag_thdr_truncated'

Netfilter is depending on ipv6 symbol ipv6_frag_thdr_truncated. This
dependency is forcing IPV6=y.

Remove this dependency by moving ipv6_frag_thdr_truncated out of ipv6. This
is the same solution as used with a similar issues: Referring to
commit 70b095c843 ("ipv6: remove dependency of nf_defrag_ipv6 on ipv6
module")

Fixes: 9d9e937b1c ("ipv6/netfilter: Discard first fragment not including all headers")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Georg Kohmann <geokohma@cisco.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/20201119095833.8409-1-geokohma@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-19 10:49:50 -08:00
Linus Torvalds
ce228d4594 Merge tag 'nfsd-5.10-2' of git://linux-nfs.org/~bfields/linux
Pull nfsd fix from Bruce Fields:
 "Just one quick fix for a tracing oops"

* tag 'nfsd-5.10-2' of git://linux-nfs.org/~bfields/linux:
  SUNRPC: Fix oops in the rpc_xdr_buf event class
2020-11-18 12:06:34 -08:00
Linus Torvalds
f86fee1845 Merge tag 'linux-kselftest-kunit-fixes-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kunit fixes from Shuah Khan:
 "Several fixes to Kunit documentation and tools, and to not pollute
  the source directory.

  Also remove the incorrect kunit .gitattributes file"

* tag 'linux-kselftest-kunit-fixes-5.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kunit: fix display of failed expectations for strings
  kunit: tool: fix extra trailing \n in raw + parsed test output
  kunit: tool: print out stderr from make (like build warnings)
  KUnit: Docs: usage: wording fixes
  KUnit: Docs: style: fix some Kconfig example issues
  KUnit: Docs: fix a wording typo
  kunit: Do not pollute source directory with generated files (test.log)
  kunit: Do not pollute source directory with generated files (.kunitconfig)
  kunit: tool: fix pre-existing python type annotation errors
  kunit: Fix kunit.py parse subcommand (use null build_dir)
  kunit: tool: unmark test_data as binary blobs
2020-11-18 11:57:55 -08:00