Pull devicetree fixes from Rob Herring:
- Fix NIOS2 boot with external DTB
- Add missing synchronization needed between fw_devlink and DT overlay
removals
- Fix some unit-address regex's to be hex only
- Drop some 10+ year old "unstable binding" statements
- Add new SoCs to QCom UFS binding
- Add TPM bindings to TPM maintainers
* tag 'devicetree-fixes-for-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
nios2: Only use built-in devicetree blob if configured to do so
dt-bindings: timer: narrow regex for unit address to hex numbers
dt-bindings: soc: fsl: narrow regex for unit address to hex numbers
dt-bindings: remoteproc: ti,davinci: remove unstable remark
dt-bindings: clock: ti: remove unstable remark
dt-bindings: clock: keystone: remove unstable remark
of: module: prevent NULL pointer dereference in vsnprintf()
dt-bindings: ufs: qcom: document SM6125 UFS
dt-bindings: ufs: qcom: document SC7180 UFS
dt-bindings: ufs: qcom: document SC8180X UFS
of: dynamic: Synchronize of_changeset_destroy() with the devlink removals
driver core: Introduce device_link_wait_removal()
docs: dt-bindings: add missing address/size-cells to example
MAINTAINERS: Add TPM DT bindings to TPM maintainers
Several Qualcomm Bluetooth controllers lack persistent storage for the
device address and instead one can be provided by the boot firmware
using the 'local-bd-address' devicetree property.
The Bluetooth bindings clearly states that the address should be
specified in little-endian order, but due to a long-standing bug in the
Qualcomm driver which reversed the address some boot firmware has been
providing the address in big-endian order instead.
The only device out there that should be affected by this is the WCN3991
used in some Chromebooks.
Add a 'qcom,local-bd-address-broken' property which can be set on these
platforms to indicate that the boot firmware is using the wrong byte
order.
Note that ChromeOS always updates the kernel and devicetree in lockstep
so that there is no need to handle backwards compatibility with older
devicetrees.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Document already upstreamed and used Qualcomm SC7180 UFS host controller
to fix dtbs_check warnings like:
sc7180-idp.dtb: ufshc@1d84000: compatible:0: 'qcom,sc7180-ufshc' is not one of ...
sc7180-idp.dtb: ufshc@1d84000: clocks: [[39, 99], [39, 7], [39, 98], [39, 107], [36, 0], [39, 106], [39, 105]] is too short
sc7180-idp.dtb: ufshc@1d84000: clock-names: ['core_clk', 'bus_aggr_clk', 'iface_clk', 'core_clk_unipro', ...] is too short
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240326174632.209745-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Document already upstreamed and used Qualcomm SC8180x UFS host
controller to fix dtbs_check warnings like:
sc8180x-primus.dtb: ufshc@1d84000: compatible:0: 'qcom,sc8180x-ufshc' is not one of ['qcom,msm8994-ufshc', ... ]
sc8180x-primus.dtb: ufshc@1d84000: Unevaluated properties are not allowed ('compatible' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240326174632.209745-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Pull more clocksource updates from Thomas Gleixner:
"A set of updates for clocksource and clockevent drivers:
- A fix for the prescaler of the ARM global timer where the prescaler
mask define only covered 4 bits while it is actully 8 bits wide.
This obviously restricted the possible range of prescaler
adjustments
- A fix for the RISC-V timer which prevents a timer interrupt being
raised while the timer is initialized
- A set of device tree updates to support new system on chips in
various drivers
- Kernel-doc and other cleanups all over the place"
* tag 'timers-core-2024-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/timer-riscv: Clear timer interrupt on timer initialization
dt-bindings: timer: Add support for cadence TTC PWM
clocksource/drivers/arm_global_timer: Simplify prescaler register access
clocksource/drivers/arm_global_timer: Guard against division by zero
clocksource/drivers/arm_global_timer: Make gt_target_rate unsigned long
dt-bindings: timer: add Ralink SoCs system tick counter
clocksource: arm_global_timer: fix non-kernel-doc comment
clocksource/drivers/arm_global_timer: Remove stray tab
clocksource/drivers/arm_global_timer: Fix maximum prescaler value
clocksource/drivers/imx-sysctr: Add i.MX95 support
clocksource/drivers/imx-sysctr: Drop use global variables
dt-bindings: timer: nxp,sysctr-timer: support i.MX95
dt-bindings: timer: renesas: ostm: Document RZ/Five SoC
dt-bindings: timer: renesas,tmu: Document input capture interrupt
clocksource/drivers/ti-32K: Fix misuse of "/**" comment
clocksource/drivers/stm32: Fix all kernel-doc warnings
dt-bindings: timer: exynos4210-mct: Add google,gs101-mct compatible
clocksource/drivers/imx: Fix -Wunused-but-set-variable warning
Pull RISC-V updates from Palmer Dabbelt:
- Support for various vector-accelerated crypto routines
- Hibernation is now enabled for portable kernel builds
- mmap_rnd_bits_max is larger on systems with larger VAs
- Support for fast GUP
- Support for membarrier-based instruction cache synchronization
- Support for the Andes hart-level interrupt controller and PMU
- Some cleanups around unaligned access speed probing and Kconfig
settings
- Support for ACPI LPI and CPPC
- Various cleanus related to barriers
- A handful of fixes
* tag 'riscv-for-linus-6.9-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (66 commits)
riscv: Fix syscall wrapper for >word-size arguments
crypto: riscv - add vector crypto accelerated AES-CBC-CTS
crypto: riscv - parallelize AES-CBC decryption
riscv: Only flush the mm icache when setting an exec pte
riscv: Use kcalloc() instead of kzalloc()
riscv/barrier: Add missing space after ','
riscv/barrier: Consolidate fence definitions
riscv/barrier: Define RISCV_FULL_BARRIER
riscv/barrier: Define __{mb,rmb,wmb}
RISC-V: defconfig: Enable CONFIG_ACPI_CPPC_CPUFREQ
cpufreq: Move CPPC configs to common Kconfig and add RISC-V
ACPI: RISC-V: Add CPPC driver
ACPI: Enable ACPI_PROCESSOR for RISC-V
ACPI: RISC-V: Add LPI driver
cpuidle: RISC-V: Move few functions to arch/riscv
riscv: Introduce set_compat_task() in asm/compat.h
riscv: Introduce is_compat_thread() into compat.h
riscv: add compile-time test into is_compat_task()
riscv: Replace direct thread flag check with is_compat_task()
riscv: Improve arch_get_mmap_end() macro
...
Pull more sound fixes from Takashi Iwai:
"The remaining fixes for 6.9-rc1 that have been gathered in this week.
More about ASoC at this time (one long-standing fix for compress
offload, SOF, AMD ACP, Rockchip, Cirrus and tlv320 stuff) while
another regression fix in ALSA core and a couple of HD-audio quirks as
usual are included"
* tag 'sound-fix2-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: control: Fix unannotated kfree() cleanup
ALSA: hda/realtek: Add quirks for some Clevo laptops
ALSA: hda/realtek: Add quirk for HP Spectre x360 14 eu0000
ALSA: hda/realtek: fix the hp playback volume issue for LG machines
ASoC: soc-compress: Fix and add DPCM locking
ASoC: SOF: amd: Skip IRAM/DRAM size modification for Steam Deck OLED
ASoC: SOF: amd: Move signed_fw_image to struct acp_quirk_entry
ASoC: amd: yc: Revert "add new YC platform variant (0x63) support"
ASoC: amd: yc: Revert "Fix non-functional mic on Lenovo 21J2"
ASoC: soc-core.c: Skip dummy codec when adding platforms
ASoC: rockchip: i2s-tdm: Fix inaccurate sampling rates
ASoC: dt-bindings: cirrus,cs42l43: Fix 'gpio-ranges' schema
ASoC: amd: yc: Fix non-functional mic on ASUS M7600RE
ASoC: tlv320adc3xxx: Don't strip remove function when driver is builtin
Pull more i2c updates from Wolfram Sang:
"Some more I2C updates after the dependencies have been merged now.
Plus a DT binding fix"
* tag 'i2c-for-6.9-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
dt-bindings: i2c: qcom,i2c-cci: Fix OV7251 'data-lanes' entries
i2c: muxes: pca954x: Allow sharing reset GPIO
i2c: nomadik: sort includes
i2c: nomadik: support Mobileye EyeQ5 I2C controller
i2c: nomadik: fetch i2c-transfer-timeout-us property from devicetree
i2c: nomadik: replace jiffies by ktime for FIFO flushing timeout
i2c: nomadik: support short xfer timeouts using waitqueue & hrtimer
i2c: nomadik: use bitops helpers
i2c: nomadik: simplify IRQ masking logic
i2c: nomadik: rename private struct pointers from dev to priv
dt-bindings: i2c: nomadik: add mobileye,eyeq5-i2c bindings and example
Pull RTC updates from Alexandre Belloni:
"Subsytem:
- rtc_class is now const
Drivers:
- ds1511: cleanup, set date and time range and alarm offset limit
- max31335: fix interrupt handler
- pcf8523: improve suspend support"
* tag 'rtc-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (28 commits)
MAINTAINER: Include linux-arm-msm for Qualcomm RTC patches
dt-bindings: rtc: zynqmp: Add support for Versal/Versal NET SoCs
rtc: class: make rtc_class constant
dt-bindings: rtc: abx80x: Improve checks on trickle charger constraints
MAINTAINERS: adjust file entry in ARM/Mediatek RTC DRIVER
rtc: nct3018y: fix possible NULL dereference
rtc: max31335: fix interrupt status reg
rtc: mt6397: select IRQ_DOMAIN instead of depending on it
dt-bindings: rtc: abx80x: convert to yaml
rtc: m41t80: Use the unified property API get the wakeup-source property
dt-bindings: at91rm9260-rtt: add sam9x7 compatible
dt-bindings: rtc: convert MT7622 RTC to the json-schema
dt-bindings: rtc: convert MT2717 RTC to the json-schema
rtc: pcf8523: add suspend handlers for alarm IRQ
rtc: ds1511: set alarm offset limit
rtc: ds1511: set range
rtc: ds1511: drop inline/noinline hints
rtc: ds1511: rename pdata
rtc: ds1511: implement ds1511_rtc_read_alarm properly
rtc: ds1511: remove partial alarm support
...
Pull UBI and UBIFS updates from Richard Weinberger:
"UBI:
- Add Zhihao Cheng as reviewer
- Attach via device tree
- Add NVMEM layer
- Various fastmap related fixes
UBIFS:
- Add Zhihao Cheng as reviewer
- Convert to folios
- Various fixes (memory leaks in error paths, function prototypes)"
* tag 'ubifs-for-linus-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: (34 commits)
mtd: ubi: fix NVMEM over UBI volumes on 32-bit systems
mtd: ubi: provide NVMEM layer over UBI volumes
mtd: ubi: populate ubi volume fwnode
mtd: ubi: introduce pre-removal notification for UBI volumes
mtd: ubi: attach from device tree
mtd: ubi: block: use notifier to create ubiblock from parameter
dt-bindings: mtd: ubi-volume: allow UBI volumes to provide NVMEM
dt-bindings: mtd: add basic bindings for UBI
ubifs: Queue up space reservation tasks if retrying many times
ubifs: ubifs_symlink: Fix memleak of inode->i_link in error path
ubifs: dbg_check_idx_size: Fix kmemleak if loading znode failed
ubi: Correct the number of PEBs after a volume resize failure
ubi: fix slab-out-of-bounds in ubi_eba_get_ldesc+0xfb/0x130
ubi: correct the calculation of fastmap size
ubifs: Remove unreachable code in dbg_check_ltab_lnum
ubifs: fix function pointer cast warnings
ubifs: fix sort function prototype
ubi: Check for too small LEB size in VTBL code
MAINTAINERS: Add Zhihao Cheng as UBI/UBIFS reviewer
ubifs: Convert populate_page() to take a folio
...
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the big set of char/misc and a number of other driver
subsystem updates for 6.9-rc1. Included in here are:
- IIO driver updates, loads of new ones and evolution of existing ones
- coresight driver updates
- const cleanups for many driver subsystems
- speakup driver additions
- platform remove callback void cleanups
- mei driver updates
- mhi driver updates
- cdx driver updates for MSI interrupt handling
- nvmem driver updates
- other smaller driver updates and cleanups, full details in the
shortlog
All of these have been in linux-next for a long time with no reported
issue, other than a build warning for the speakup driver"
The build warning hits clang and is a gcc (and C23) extension, and is
fixed up in the merge.
Link: https://lore.kernel.org/all/20240321134831.GA2762840@dev-arch.thelio-3990X/
* tag 'char-misc-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (279 commits)
binder: remove redundant variable page_addr
uio_dmem_genirq: UIO_MEM_DMA_COHERENT conversion
uio_pruss: UIO_MEM_DMA_COHERENT conversion
cnic,bnx2,bnx2x: use UIO_MEM_DMA_COHERENT
uio: introduce UIO_MEM_DMA_COHERENT type
cdx: add MSI support for CDX bus
pps: use cflags-y instead of EXTRA_CFLAGS
speakup: Add /dev/synthu device
speakup: Fix 8bit characters from direct synth
parport: sunbpp: Convert to platform remove callback returning void
parport: amiga: Convert to platform remove callback returning void
char: xillybus: Convert to platform remove callback returning void
vmw_balloon: change maintainership
MAINTAINERS: change the maintainer for hpilo driver
char: xilinx_hwicap: Fix NULL vs IS_ERR() bug
hpet: remove hpets::hp_clocksource
platform: goldfish: move the separate 'default' propery for CONFIG_GOLDFISH
char: xilinx_hwicap: drop casting to void in dev_set_drvdata
greybus: move is_gb_* functions out of greybus.h
greybus: Remove usage of the deprecated ida_simple_xx() API
...
Pull tty / serial driver updates from Greg KH:
"Here is the big set of TTY/Serial driver updates and cleanups for
6.9-rc1. Included in here are:
- more tty cleanups from Jiri
- loads of 8250 driver cleanups from Andy
- max310x driver updates
- samsung serial driver updates
- uart_prepare_sysrq_char() updates for many drivers
- platform driver remove callback void cleanups
- stm32 driver updates
- other small tty/serial driver updates
All of these have been in linux-next for a long time with no reported
issues"
* tag 'tty-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits)
dt-bindings: serial: stm32: add power-domains property
serial: 8250_dw: Replace ACPI device check by a quirk
serial: Lock console when calling into driver before registration
serial: 8250_uniphier: Switch to use uart_read_port_properties()
serial: 8250_tegra: Switch to use uart_read_port_properties()
serial: 8250_pxa: Switch to use uart_read_port_properties()
serial: 8250_omap: Switch to use uart_read_port_properties()
serial: 8250_of: Switch to use uart_read_port_properties()
serial: 8250_lpc18xx: Switch to use uart_read_port_properties()
serial: 8250_ingenic: Switch to use uart_read_port_properties()
serial: 8250_dw: Switch to use uart_read_port_properties()
serial: 8250_bcm7271: Switch to use uart_read_port_properties()
serial: 8250_bcm2835aux: Switch to use uart_read_port_properties()
serial: 8250_aspeed_vuart: Switch to use uart_read_port_properties()
serial: port: Introduce a common helper to read properties
serial: core: Add UPIO_UNKNOWN constant for unknown port type
serial: core: Move struct uart_port::quirks closer to possible values
serial: sh-sci: Call sci_serial_{in,out}() directly
serial: core: only stop transmit when HW fifo is empty
serial: pch: Use uart_prepare_sysrq_char().
...
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.9-rc1. Lots
of tiny changes and forward progress to support new hardware and
better support for existing devices. Included in here are:
- Thunderbolt (i.e. USB4) updates for newer hardware and uses as more
people start to use the hardware
- default USB authentication mode Kconfig and documentation update to
make it more obvious what is going on
- USB typec updates and enhancements
- usual dwc3 driver updates
- usual xhci driver updates
- function USB (i.e. gadget) driver updates and additions
- new device ids for lots of drivers
- loads of other small updates, full details in the shortlog
All of these, including a "last minute regression fix" have been in
linux-next with no reported issues"
* tag 'usb-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (185 commits)
usb: usb-acpi: Fix oops due to freeing uninitialized pld pointer
usb: gadget: net2272: Use irqflags in the call to net2272_probe_fin
usb: gadget: tegra-xudc: Fix USB3 PHY retrieval logic
phy: tegra: xusb: Add API to retrieve the port number of phy
USB: gadget: pxa27x_udc: Remove unused of_gpio.h
usb: gadget/snps_udc_plat: Remove unused of_gpio.h
usb: ohci-pxa27x: Remove unused of_gpio.h
usb: sl811-hcd: only defined function checkdone if QUIRK2 is defined
usb: Clarify expected behavior of dev_bin_attrs_are_visible()
xhci: Allow RPM on the USB controller (1022:43f7) by default
usb: isp1760: remove SLAB_MEM_SPREAD flag usage
usb: misc: onboard_hub: use pointer consistently in the probe function
usb: gadget: fsl: Increase size of name buffer for endpoints
usb: gadget: fsl: Add of device table to enable module autoloading
usb: typec: tcpm: add support to set tcpc connector orientatition
usb: typec: tcpci: add generic tcpci fallback compatible
dt-bindings: usb: typec-tcpci: add tcpci fallback binding
usb: gadget: fsl-udc: Replace custom log wrappers by dev_{err,warn,dbg,vdbg}
usb: core: Set connect_type of ports based on DT node
dt-bindings: usb: Add downstream facing ports to realtek binding
...
Pull remoteproc updates from Bjorn Andersson:
"Qualcomm SM8650 audio, compute and modem remoteproc are added.
Qualcomm X1 Elite audio and compute remoteprocs are added, after
support for shutting down the bootloader-loaded firmware loaded into
the audio DSP..
A dozen drivers in the subsystem are transitioned to use devres
helpers for remoteproc and memory allocations - this makes it possible
to acquire in-kernel handle to individual remoteproc instances in a
cluster.
The release of DMA memory for remoteproc virtio is corrected to ensure
that restarting due to a watchdog bite doesn't attempt to allocate the
memory again without first freeing it.
Last, but not least, a couple of DeviceTree binding cleanups"
* tag 'rproc-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (30 commits)
remoteproc: qcom_q6v5_pas: Unload lite firmware on ADSP
remoteproc: qcom_q6v5_pas: Add support for X1E80100 ADSP/CDSP
dt-bindings: remoteproc: qcom,sm8550-pas: document the X1E80100 aDSP & cDSP
remoteproc: qcom_wcnss: Use devm_rproc_alloc() helper
remoteproc: qcom_q6v5_wcss: Use devm_rproc_alloc() helper
remoteproc: qcom_q6v5_pas: Use devm_rproc_alloc() helper
remoteproc: qcom_q6v5_mss: Use devm_rproc_alloc() helper
remoteproc: qcom_q6v5_adsp: Use devm_rproc_alloc() helper
dt-bindings: remoteproc: do not override firmware-name $ref
dt-bindings: remoteproc: qcom,glink-rpm-edge: drop redundant type from label
remoteproc: qcom: pas: correct data indentation
remoteproc: Make rproc_get_by_phandle() work for clusters
remoteproc: qcom: pas: Add SM8650 remoteproc support
remoteproc: qcom: pas: make region assign more generic
dt-bindings: remoteproc: qcom,sm8550-pas: document the SM8650 PAS
remoteproc: k3-dsp: Use devm_rproc_add() helper
remoteproc: k3-dsp: Use devm_ioremap_wc() helper
remoteproc: k3-dsp: Add devm action to release tsp
remoteproc: k3-dsp: Use devm_kzalloc() helper
remoteproc: k3-dsp: Use devm_ti_sci_get_by_phandle() helper
...
The OV7251 sensor only has a single data lane, so 2 entries is not valid.
Fix this to be 1 entry as the schema specifies.
The schema validation doesn't catch this currently due to some limitations
in handling of arrays vs. matrices, but a fix is being worked on.
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Théo adds support for the Mobileye EyeQ5-I2C in the bindings.
This patch is followed by eight commits featuring improvements to
the Nomadik controller, such as simplification of the IRQ logic,
renaming of the private data structure, more efficient use of
FIELD_PREP/GET, GENMASK, etc., better time measurement with
ktime, and more.
Pull more ARM SoC updates from Arnd Bergmann:
"These are changes that for some reason ended up not making it into the
first four branches but that should still make it into 6.9:
- A rework of the omap clock support that touches both drivers and
device tree files
- The reset controller branch changes that had a dependency on late
bugfixes. Merging them here avoids a backmerge of 6.8-rc5 into the
drivers branch
- The RISC-V/starfive, RISC-V/microchip and ARM/Broadcom devicetree
changes that got delayed and needed some extra time in linux-next
for wider testing"
* tag 'soc-late-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits)
soc: fsl: dpio: fix kcalloc() argument order
bus: ts-nbus: Improve error reporting
bus: ts-nbus: Convert to atomic pwm API
riscv: dts: starfive: jh7110: Add camera subsystem nodes
ARM: bcm: stop selecing CONFIG_TICK_ONESHOT
ARM: dts: omap3: Update clksel clocks to use reg instead of ti,bit-shift
ARM: dts: am3: Update clksel clocks to use reg instead of ti,bit-shift
clk: ti: Improve clksel clock bit parsing for reg property
clk: ti: Handle possible address in the node name
dt-bindings: pwm: opencores: Add compatible for StarFive JH8100
dt-bindings: riscv: cpus: reg matches hart ID
reset: Instantiate reset GPIO controller for shared reset-gpios
reset: gpio: Add GPIO-based reset controller
cpufreq: do not open-code of_phandle_args_equal()
of: Add of_phandle_args_equal() helper
reset: simple: add support for Sophgo SG2042
dt-bindings: reset: sophgo: support SG2042
riscv: dts: microchip: add specific compatible for mpfs pdma
riscv: dts: microchip: add missing CAN bus clocks
ARM: brcmstb: Add debug UART entry for 74165
...
Pull more thermal control updates from Rafael Wysocki:
"These update thermal drivers for ARM platforms by adding new hardware
support (r8a779h0, H616 THS), addressing issues (Mediatek LVTS,
Mediatek MT7896, thermal-of) and cleaning up code.
Specifics:
- Fix memory leak in the error path at probe time in the Mediatek
LVTS driver (Christophe Jaillet)
- Fix control buffer enablement regression on Meditek MT7896 (Frank
Wunderlich)
- Drop spaces before TABs in different places: thermal-of, ST drivers
and Makefile (Geert Uytterhoeven)
- Adjust DT binding for NXP as fsl,tmu-range min/maxItems can vary
among several SoC versions (Fabio Estevam)
- Add support for the H616 THS controller on Sun8i platforms (Martin
Botka)
- Don't fail probe due to zone registration failure because there is
no trip points defined in the DT (Mark Brown)
- Support variable TMU array size for new platforms (Peng Fan)
- Adjust the DT binding for thermal-of and make the polling time not
required and assume it is zero when not found in the DT (Konrad
Dybcio)
- Add r8a779h0 support in both the DT and the rcar_gen3 driver (Geert
Uytterhoeven)"
* tag 'thermal-6.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal/drivers/rcar_gen3: Add support for R-Car V4M
dt-bindings: thermal: rcar-gen3-thermal: Add r8a779h0 support
thermal/of: Assume polling-delay(-passive) 0 when absent
dt-bindings: thermal-zones: Don't require polling-delay(-passive)
thermal/drivers/qoriq: Fix getting tmu range
thermal/drivers/sun8i: Don't fail probe due to zone registration failure
thermal/drivers/sun8i: Add support for H616 THS controller
thermal/drivers/sun8i: Add SRAM register access code
thermal/drivers/sun8i: Extend H6 calibration to support 4 sensors
thermal/drivers/sun8i: Explain unknown H6 register value
dt-bindings: thermal: sun8i: Add H616 THS controller
soc: sunxi: sram: export register 0 for THS on H616
dt-bindings: thermal: qoriq-thermal: Adjust fsl,tmu-range min/maxItems
thermal: Drop spaces before TABs
thermal/drivers/mediatek: Fix control buffer enablement on MT7896
thermal/drivers/mediatek/lvts_thermal: Fix a memory leak in an error handling path
Pull clocksource/event driver updates from Daniel Lezcano:
- Fix -Wunused-but-set-variable warning for the iMX GPT timer (Daniel
Lezcano)
- Add Pixel6 compatible string for Exynos 4210 MCT timer (Peter Griffin)
- Fix all kernel-doc warnings and misuse of comment format (Randy
Dunlap)
- Document in the DT bindings the interrupt used for input capture
interrupt and udpate the example to match the reality (Geert
Uytterhoeven)
- Document RZ/Five SoC DT bindings (Lad Prabhakar)
- Add DT bindings support for the i.MX95, reorganize the driver to
move globale variables to a timer private structure and introduce
the i.MX95 timer support (Peng Fan)
- Fix prescalar value to conform to the ARM global timer
documentation. Fix data types and comparison, guard the divide by
zero code section and use the available macros for bit manipulation
(Martin Blumenstingl)
- Add Ralink SoCs system tick counter (Sergio Paracuellos)
- Add support for cadence TTC PWM (Mubin Sayyed)
- Clear timer interrupt on timer initialization to prevent the
interrupt to fire during setup (Ley Foon Tan)
Link: https://lore.kernel.org/r/5552010a-1ce2-46a1-a740-a69f2e9a2cf2@linaro.org
Pull i3c updates from Alexandre Belloni:
"Not much this cycle with only three patches.
Core:
- i3c_bus_type is now const
Drivers:
- dw: disabling IBI is only allowed when hot join and SIR are disabled"
* tag 'i3c/for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: Make i3c_bus_type const
i3c: dw: Disable IBI IRQ depends on hot-join and SIR enabling
dt-bindings: i3c: drop "master" node name suffix
Pull watchdog updates from Wim Van Sebroeck:
- Remove usage of the deprecated ida_simple_xx() API
- Add kernel-doc for wdt_set_timeout()
- Add support for R-Car V4M, StarFive's JH8100 and sam9x7-wdt
- Fixes and small improvements
* tag 'linux-watchdog-6.9-rc1' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: intel-mid_wdt: Get platform data via dev_get_platdata()
watchdog: intel-mid_wdt: Don't use "proxy" headers
watchdog: intel-mid_wdt: Remove unused intel-mid.h
dt-bindings: watchdog: sama5d4-wdt: add compatible for sam9x7-wdt
dt-bindings: watchdog: sprd,sp9860-wdt: convert to YAML
dt-bindings: watchdog: starfive,jh7100-wdt: Add compatible for JH8100
watchdog: stm32_iwdg: initialize default timeout
dt-bindings: watchdog: arm,sp805: document the reset signal
watchdog: sp805_wdt: deassert the reset if available
watchdog/hpwdt: Support Suspend and Resume
dt-bindings: watchdog: renesas-wdt: Add support for R-Car V4M
watchdog: starfive: check watchdog status before enabling in system resume
watchdog: starfive: Check pm_runtime_enabled() before decrementing usage counter
watchdog: qcom: fine tune the max timeout value calculation
watchdog: Add kernel-doc for wdt_set_timeout()
watchdog: core: Remove usage of the deprecated ida_simple_xx() API
Pull input updates from Dmitry Torokhov:
- a new driver for Goodix Berlin I2C and SPI touch controllers
- support for IQS7222D v1.1 and v1.2 in iqs7222 driver
- support for IST3032C and IST3038B parts in Imagis touchscreen driver
- support for touch keys for Imagis touchscreen controllers
- support for Snakebyte GAMEPADs in xpad driver
- various cleanups and conversions to yaml for device tree bindings
- assorted fixes and cleanups
- old Synaptics navpoint driver has been removed since the only board
that used it (HP iPAQ hx4700) was removed a while ago.
* tag 'input-for-v6.9-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (37 commits)
Input: xpad - add support for Snakebyte GAMEPADs
dt-bindings: input: samsung,s3c6410-keypad: convert to DT Schema
Input: imagis - add touch key support
dt-bindings: input: imagis: Document touch keys
Input: imagis - use FIELD_GET where applicable
Input: make input_class constant
dt-bindings: input: atmel,captouch: convert bindings to YAML
Input: iqs7222 - add support for IQS7222D v1.1 and v1.2
dt-bindings: input: allwinner,sun4i-a10-lrad: drop redundant type from label
Input: serio - make serio_bus const
Input: synaptics-rmi4 - make rmi_bus_type const
Input: xilinx_ps2 - fix kernel-doc for xps2_of_probe function
input/touchscreen: imagis: add support for IST3032C
dt-bindings: input/touchscreen: imagis: add compatible for IST3032C
input/touchscreen: imagis: Add support for Imagis IST3038B
dt-bindings: input/touchscreen: Add compatible for IST3038B
input/touchscreen: imagis: Correct the maximum touch area value
Input: leds - change config symbol dependency for audio mute trigger
Input: ti_am335x_tsc - remove redundant assignment to variable config
Input: xpad - sort xpad_device by vendor and product ID
...
Pull crypto updates from Herbert Xu:
"API:
- Avoid unnecessary copying in scomp for trivial SG lists
Algorithms:
- Optimise NEON CCM implementation on ARM64
Drivers:
- Add queue stop/query debugfs support in hisilicon/qm
- Intel qat updates and cleanups"
* tag 'v6.9-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (79 commits)
Revert "crypto: remove CONFIG_CRYPTO_STATS"
crypto: scomp - remove memcpy if sg_nents is 1 and pages are lowmem
crypto: tcrypt - add ffdhe2048(dh) test
crypto: iaa - fix the missing CRYPTO_ALG_ASYNC in cra_flags
crypto: hisilicon/zip - fix the missing CRYPTO_ALG_ASYNC in cra_flags
hwrng: hisi - use dev_err_probe
MAINTAINERS: Remove T Ambarus from few mchp entries
crypto: iaa - Fix comp/decomp delay statistics
crypto: iaa - Fix async_disable descriptor leak
dt-bindings: rng: atmel,at91-trng: add sam9x7 TRNG
dt-bindings: crypto: add sam9x7 in Atmel TDES
dt-bindings: crypto: add sam9x7 in Atmel SHA
dt-bindings: crypto: add sam9x7 in Atmel AES
crypto: remove CONFIG_CRYPTO_STATS
crypto: dh - Make public key test FIPS-only
crypto: rockchip - fix to check return value
crypto: jitter - fix CRYPTO_JITTERENTROPY help text
crypto: qat - make ring to service map common for QAT GEN4
crypto: qat - fix ring to service map for dcc in 420xx
crypto: qat - fix ring to service map for dcc in 4xxx
...
Pull MIPS updates from Thomas Bogendoerfer:
- added support for Mobileye SoCs
- unified GPR/CP0 regs handling for uasm
- cleanups and fixes
* tag 'mips_6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (56 commits)
mips: cm: Convert __mips_cm_phys_base() to weak function
mips: cm: Convert __mips_cm_l2sync_phys_base() to weak function
mips: dts: ralink: mt7621: add cell count properties to usb
mips: dts: ralink: mt7621: add serial1 and serial2 nodes
mips: dts: ralink: mt7621: reorder serial0 properties
mips: dts: ralink: mt7621: associate uart1_pins with serial0
MIPS: ralink: Don't use "proxy" headers
mips: sibyte: make tb_class constant
mips: mt: make mt_class constant
MIPS: ralink: Remove unused of_gpio.h
bus: bt1-apb: Remove duplicate include
MAINTAINERS: remove entry to non-existing file in MOBILEYE MIPS SOCS
MIPS: mipsregs: Parse fp and sp register by name in parse_r
tty: mips_ejtag_fdc: Fix passing incompatible pointer type warning
mips: zboot: Fix "no previous prototype" build warning
MIPS: mipsregs: Set proper ISA level for virt extensions
MIPS: Implement microMIPS MT ASE helpers
MIPS: Limit MIPS_MT_SMP support by ISA reversion
MIPS: Loongson64: test for -march=loongson3a cflag
MIPS: BMIPS: Drop unnecessary assembler flag
...
Pull devicetree updates from Rob Herring:
"DT core:
- Add cleanup.h based auto release of struct device_node pointers via
__free marking and new for_each_child_of_node_scoped() iterator to
use it.
- Always create a base skeleton DT when CONFIG_OF is enabled. This
supports several usecases of adding DT data on non-DT booted
systems.
- Move around some /reserved-memory code in preparation for further
improvements
- Add a stub for_each_property_of_node() for !OF
- Adjust the printk levels on some messages
- Fix __be32 sparse warning
- Drop RESERVEDMEM_OF_DECLARE usage from Freescale qbman driver
(currently orphaned)
- Add Saravana Kannan and drop Frank Rowand as DT maintainers
DT bindings:
- Convert Mediatek timer, Mediatek sysirq, fsl,imx6ul-tsc,
fsl,imx6ul-pinctrl, Atmel AIC, Atmel HLCDC, FPGA region, and
xlnx,sd-fec to DT schemas
- Add existing, but undocumented fsl,imx-anatop binding
- Add bunch of undocumented vendor prefixes used in compatible
strings
- Drop obsolete brcm,bcm2835-pm-wdt binding
- Drop obsolete i2c.txt which as been replaced with schema in
dtschema
- Add DPS310 device and sort trivial-devices.yaml
- Enable undocumented compatible checks on DT binding examples
- More QCom maintainer fixes/updates
- Updates to writing-schema.rst and DT submitting-patches.rst to
cover some frequent review comments
- Clean-up SPDX tags to use 'OR' rather than 'or'"
* tag 'devicetree-for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (56 commits)
dt-bindings: soc: imx: fsl,imx-anatop: add imx6q regulators
of: unittest: Use for_each_child_of_node_scoped()
of: Introduce for_each_*_child_of_node_scoped() to automate of_node_put() handling
of: Add cleanup.h based auto release via __free(device_node) markings
of: Move all FDT reserved-memory handling into of_reserved_mem.c
of: Add KUnit test to confirm DTB is loaded
of: unittest: treat missing of_root as error instead of fixing up
x86/of: Unconditionally call unflatten_and_copy_device_tree()
um: Unconditionally call unflatten_device_tree()
of: Create of_root if no dtb provided by firmware
of: Always unflatten in unflatten_and_copy_device_tree()
dt-bindings: timer: mediatek: Convert to json-schema
dt-bindings: interrupt-controller: fsl,intmux: Include power-domains support
soc: fsl: qbman: Remove RESERVEDMEM_OF_DECLARE usage
dt-bindings: fsl-imx-sdma: fix HDMI audio index
dt-bindings: soc: imx: fsl,imx-iomuxc-gpr: add imx6
dt-bindings: soc: imx: fsl,imx-anatop: add binding
dt-bindings: input: touchscreen: fsl,imx6ul-tsc convert to YAML
dt-bindings: pinctrl: fsl,imx6ul-pinctrl: convert to YAML
of: make for_each_property_of_node() available to to !OF
...
Pull MTD updates from Miquel Raynal:
"MTD:
- The Carillo Ranch driver has been removed
- Top level mtd bindings have received a couple of improvements
(references, selects)
- The ssfdc driver received few minor adjustments
- The usual load of misc/small improvements and fixes
Raw NAND:
- The main series brought is an update of the Broadcom support to
support all BCMBCA SoCs and their specificity (ECC, write
protection, configuration straps), plus a few misc fixes and
changes in the main driver. Device tree updates are also part of
this PR, initially because of a misunderstanding on my side.
- The STM32_FMC2 controller driver is also upgraded to properly
support MP1 and MP25 SoCs.
- A new compatible is added for an Atmel flavor.
- Among all these feature changes, there is as well a load of
continuous read related fixes, avoiding more corner conditions and
clarifying the logic. Finally a few miscellaneous fixes are made to
the core, the lpx32xx_mlc, fsl_lbc, Meson and Atmel controller
driver, as well as final one in the Hynix vendor driver.
SPI-NAND:
- The ESMT support has been extended to match 5 bytes ID to avoid
collisions. Winbond support on its side receives support for
W25N04KV chips.
SPI NOR:
- SPI NOR gets the non uniform erase code cleaned. We stopped using
bitmasks for erase types and flags, and instead introduced
dedicated members. We then passed the SPI NOR erase map to MTD.
Users can now determine the erase regions and make informed
decisions on partitions size.
- An optional interrupt property is now described in the bindings"
* tag 'mtd/for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (50 commits)
mtd: rawnand: Ensure continuous reads are well disabled
mtd: rawnand: Constrain even more when continuous reads are enabled
mtd: rawnand: brcmnand: Add support for getting ecc setting from strap
mtd: rawnand: brcmnand: fix sparse warnings
mtd: nand: raw: atmel: Fix comment in timings preparation
mtd: rawnand: Ensure all continuous terms are always in sync
mtd: rawnand: Add a helper for calculating a page index
mtd: rawnand: Fix and simplify again the continuous read derivations
mtd: rawnand: hynix: remove @nand_technology kernel-doc description
dt-bindings: atmel-nand: add microchip,sam9x7-pmecc
mtd: rawnand: brcmnand: Support write protection setting from dts
mtd: rawnand: brcmnand: Add BCMBCA read data bus interface
mtd: rawnand: brcmnand: Rename bcm63138 nand driver
arm64: dts: broadcom: bcmbca: Update router boards
arm64: dts: broadcom: bcmbca: Add NAND controller node
ARM: dts: broadcom: bcmbca: Add NAND controller node
mtd: spi-nor: core: correct type of i
mtd: spi-nor: core: set mtd->eraseregions for non-uniform erase map
mtd: spi-nor: core: get rid of SNOR_OVERLAID_REGION flag
mtd: spi-nor: core: get rid of SNOR_LAST_REGION flag
...
Pull dmaengine updates from Vinod Koul:
"New hardware support:
- Allwinner H616 dma support
- Renesas r8a779h0 dma controller support
- TI CSI2RX dma support
Updates:
- Freescale edma driver updates for TCD64csupport for i.MX95
- constify of pointers and args
- Yaml conversion for MediaTek High-Speed controller binding
- TI k3 udma support for TX/RX DMA channels for thread IDs:
* tag 'dmaengine-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (25 commits)
dmaengine: of: constify of_phandle_args in of_dma_find_controller()
dmaengine: pl08x: constify pointer to char in filter function
MAINTAINERS: change in AMD ptdma maintainer
MAINTAINERS: adjust file entry in MEDIATEK DMA DRIVER
dmaengine: idxd: constify the struct device_type usage
dt-bindings: renesas,rcar-dmac: Add r8a779h0 support
dt-bindings: dma: convert MediaTek High-Speed controller to the json-schema
dmaengine: idxd: make dsa_bus_type const
dmaengine: fsl-edma: integrate TCD64 support for i.MX95
dt-bindings: fsl-dma: fsl-edma: add fsl,imx95-edma5 compatible string
dmaengine: mcf-edma: utilize edma_write_tcdreg() macro for TCD Access
dmaengine: fsl-edma: add address for channel mux register in fsl_edma_chan
dmaengine: fsl-edma: fix spare build warning
dmaengine: fsl-edma: involve help macro fsl_edma_set(get)_tcd()
dt-bindings: mmp-dma: convert to YAML
dmaengine: ti: k3-psil-j721s2: Add entry for CSI2RX
dmaengine: ti: k3-udma-glue: Add function to request RX chan for thread ID
dmaengine: ti: k3-udma-glue: Add function to request TX chan for thread ID
dmaengine: ti: k3-udma-glue: Update name for remote RX channel device
dmaengine: ti: k3-udma-glue: Add function to parse channel by ID
...
Pull i2c updates from Wolfram Sang:
"Minor changes to the I2C core. Most changes are in drivers:
The i801 and designware drivers received most of the changes,
including refactorings and some additions.
Recovery changes for the iMX and iMX-LPI2C are now utilizing the
generic i2c support.
The Cadence driver now supports system suspend and resume.
The hisi, mpc, sh_mobile, and npcm drivers have undergone some
cleanups and improvements. Meanwhile, Uwe continues his work on
converting the "remove" callback to become a void function.
The pca954x mux driver now supports additional configurations, such as
isolating faulty channels and flushing stuck buses, among others.
Support has been added for Renesas r8a779h0, i.MX95 LPI2C, and
Microchip sam9x7. Meanwhile, Geert lays the groundwork for the
upcoming R-Car Gen4"
* tag 'i2c-for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (34 commits)
i2c: sprd: Convert to platform remove callback returning void
Documentation: i2c: Document that client auto-detection is a legacy mechanism
i2c: remove redundant condition
i2c: rcar: Prepare for the advent of ARCH_RCAR_GEN4
i2c: imx-lpi2c: add generic GPIO recovery for LPI2C
i2c: cadence: Add system suspend and resume PM support
i2c: mpc: remove outdated macro
i2c: mpc: use proper binding for transfer timeouts
dt-bindings: i2c: mpc: use proper binding for transfer timeouts
i2c: smbus: Prepare i2c_register_spd for usage on muxed segments
i2c: constify the struct device_type usage
i2c: designware: Implement generic polling mode code for Wangxun 10Gb NIC
i2c: designware: Fix RX FIFO depth define on Wangxun 10Gb NIC
i2c: designware: Move interrupt handling functions before i2c_dw_xfer()
i2c: designware: Use accessors to DW_IC_INTR_MASK register
i2c: designware: Do not enable interrupts shortly in polling mode
i2c: designware: Uniform initialization flow for polling mode
dt-bindings: i2c: at91: Add sam9x7 compatible string
dt-bindings: i2c: imx-lpi2c: add i.MX95 LPI2C
i2c: Remove redundant comparison in npcm_i2c_reg_slave
...
Pull clk updates from Stephen Boyd:
"Not a ton of stuff happening in the clk framework. We got some more
devm helpers and we seem to be going in the direction of "just turn
this stuff on already and leave me alone!" with the addition of a
devm_clk_bulk_get_all_enable() API. I'm hoping that we can make that
into a pmdomain that drivers attach instead, but this API should help
drivers simplify in the meantime.
Outside of the devm wrappers, we've got the usual clk driver updates
that are dominated by the major phone SoC vendors (Samsung and
Qualcomm) and the non-critical driver fixes for things like incorrect
topology descriptions and wrong registers or bit fields. More details
are below, but I'd say that it looks pretty ordinary. The only thing
that really jumps out at me is the Renesas clk driver that's ignoring
clks that are assigned to remote processors in DeviceTree. That's a
new feature that they're using to avoid marking clks as
CLK_IGNORE_UNUSED based on the configuration of the system.
Core:
- Increase dev_id len for clkdev lookups
- Add a devm_clk_bulk_get_all_enable() API to get and enable all clks
for a device
- Add a devm variant of clk_rate_exclusive_get()
New Drivers:
- Display, TCSR, GPU, and Camera clock controllers for Qualcomm's X1
Elite SoC
- Google GS101 PERIC0 and PERIC1 clock controllers
- Exynos850 PDMA clocks
- Exynos850 CPU cluster 0 and 1 (CMU_CPUCLK0/CMU_CPUCLK1) clock
controllers
Removed Drivers:
- Remove the unused Qualcomm sc7180 modem clk driver
Updates:
- Fix some static checker errors in the Hisilicon clk driver
- Polarfire MSSPLL hardware has 4 output clocks (the driver supported
previously only one output); each of these 4 outputs feed dividers
and the output of each divider feed individual hardware blocks
(e.g. CAN, Crypto, eMMC); individual hardware block drivers need to
control their clocks thus clock driver support was added for all
MSSPLL output clocks
- Typo fixes in the Qualcomm IPQ5018 GCC driver
- Add "qdss_at" clk on Qualcomm IPQ6018, needed for WiFi
- Properly terminate frequency tables in different Qualcomm clk
drivers
- Add MDSS, crypto, and SDCC resets on Qualcomm MSM8953
- Add missing UFS CLKREF clks on Qualcomm SC8180X
- Avoid significant delays during boot by adding a softdep on rpmhpd
to Qualcomm SDM845 gcc driver
- Add QUPv3 RCGS w/ DFS and video resets to Qualcomm SM8150 GCC
driver
- Fix the custom GPU GX "do-nothing" method in the Qualcomm GDSC
driver
- Add an external regulator to GX GDSC on Qualcomm SC8280XP GPU clk
driver
- Switch display, GPU, video, and camera Qualcomm clk drivers to
module_platform_driver()
- Set a longer delay for Venus resets on many Qualcomm SoCs
- Correct the GDSC wait times in the Qualcomm SDM845 display clk
driver
- Fix clock listing Oops on Amlogic axg
- New pll-rate for Rockchip rk3568
- i2s rate improvements for Rockchip rk3399
- Rockchip rk3588 syscon clock fixes and removal of overall
clock-number from the rk3588 binding header
- A prerequisite for later improvements to the Rockchip rk3588 linked
clocks
- Minor clean-ups and error handling improvements in both
composite-8m and SCU i.MX clock drivers
- Fix for SAI_MCLK_SEL definition for i.MX8MP
- Register the Samsung CMU MISC clock controller earlier, so the
Multi Core Timer clocksource can use it on Google GS101
- Propagate Exynos850 SPI IPCLK rate change to parents, so the SPI
will get proper clock rates
- Refactor the generic Samsung CPU clock controllers code, preparing
it for supporting Exynos850 CPU clocks
- Fix some clk kerneldoc warnings
- Add Ethernet, SDHI, DMA, and HyperFLASH/QSPI (RPC-IF) clocks on
Renesas R-Car V4M
- Ignore all clocks which are assigned to a non-Linux system in the
Renesas clk driver
- Add watchdog clock on Renesas RZ/G3S
- Add camera (CRU) clock and reset on Renesas RZ/G2UL
- Add support for the Renesas R-Car V4M (R8A779H0) SoC
- Convert some clk bindings to YAML so they can be validated"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (150 commits)
clk: zynq: Prevent null pointer dereference caused by kmalloc failure
clk: fractional-divider: Use bit operations consistently
clk: fractional-divider: Move mask calculations out of lock
clk: Fix clk_core_get NULL dereference
clk: starfive: jh7110-vout: Convert to platform remove callback returning void
clk: starfive: jh7110-isp: Convert to platform remove callback returning void
clk: imx: imx8-acm: Convert to platform remove callback returning void
clk: qcom: gcc-ipq5018: fix register offset for GCC_UBI0_AXI_ARES reset
clk: qcom: gcc-ipq5018: fix 'halt_reg' offset of 'gcc_pcie1_pipe_clk'
clk: qcom: gcc-ipq5018: fix 'enable_reg' offset of 'gcc_gmac0_sys_clk'
clk: qcom: camcc-x1e80100: Fix missing DT_IFACE enum in x1e80100 camcc
clk: qcom: mmcc-msm8974: fix terminating of frequency table arrays
clk: qcom: mmcc-apq8084: fix terminating of frequency table arrays
clk: qcom: camcc-sc8280xp: fix terminating of frequency table arrays
clk: qcom: gcc-ipq9574: fix terminating of frequency table arrays
clk: qcom: gcc-ipq8074: fix terminating of frequency table arrays
clk: qcom: gcc-ipq6018: fix terminating of frequency table arrays
clk: qcom: gcc-ipq5018: fix terminating of frequency table arrays
clk: mediatek: clk-mt8173-apmixedsys: Use common error handling code in clk_mt8173_apmixed_probe()
clk: Add a devm variant of clk_rate_exclusive_get()
...
Pull media updates from Mauro Carvalho Chehab:
- DVB budget legacy API was finally documented. It took only 20+ years
to get some documentation about it...
- hantro driver has gained support for STM32MP25 VDEC/VENC
- rkisp1 has gained support for i.MX8MP
- atomisp got rid of two items from its todo list. Still 5 items
pending for moving it out of staging
- lots of driver fixes, cleanups and improvements
* tag 'media/v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (252 commits)
media: rcar-isp: Disallow unbind of devices
media: usbtv: Remove useless locks in usbtv_video_free()
media: mediatek: vcodec: avoid -Wcast-function-type-strict warning
media: ttpci: fix two memleaks in budget_av_attach
media: go7007: fix a memleak in go7007_load_encoder
media: dvb-frontends: avoid stack overflow warnings with clang
media: pvrusb2: fix uaf in pvr2_context_set_notify
media: usb: s2255: Refactor s2255_get_fx2fw
media: ti: j721e-csi2rx: Convert to platform remove callback returning void
media: stm32-dcmipp: Convert to platform remove callback returning void
media: nxp: imx8-isi: Convert to platform remove callback returning void
media: nuvoton: Convert to platform remove callback returning void
media: chips-media: wave5: Convert to platform remove callback returning void
media: chips-media: wave5: Remove unnecessary semicolons
media: i2c: imx290: Fix IMX920 typo
media: platform: replace of_graph_get_next_endpoint()
media: i2c: replace of_graph_get_next_endpoint()
media: ivsc: csi: Make use of sub-device state
media: ivsc: csi: Swap SINK and SOURCE pads
media: ipu-bridge: Serialise calls to IPU bridge init
...
Raw NAND
The main series brought is an update of the Broadcom support to support
all BCMBCA SoCs and their specificity (ECC, write protection,
configuration straps), plus a few misc fixes and changes in the main
driver. Device tree updates are also part of this PR, initially because
of a misunderstanding on my side.
The STM32_FMC2 controller driver is also upgraded to properly support
MP1 and MP25 SoCs.
A new compatible is added for an Atmel flavor.
Among all these feature changes, there is as well a load of continuous
read related fixes, avoiding more corner conditions and clarifying the
logic. Finally a few miscellaneous fixes are made to the core, the
lpx32xx_mlc, fsl_lbc, Meson and Atmel controller driver, as well as
final one in the Hynix vendor driver.
SPI-NAND
The ESMT support has been extended to match 5 bytes ID to avoid
collisions. Winbond support on its side receives support for W25N04KV
chips.
Pull arm64 updates from Catalin Marinas:
"The major features are support for LPA2 (52-bit VA/PA with 4K and 16K
pages), the dpISA extension and Rust enabled on arm64. The changes are
mostly contained within the usual arch/arm64/, drivers/perf, the arm64
Documentation and kselftests. The exception is the Rust support which
touches some generic build files.
Summary:
- Reorganise the arm64 kernel VA space and add support for LPA2 (at
stage 1, KVM stage 2 was merged earlier) - 52-bit VA/PA address
range with 4KB and 16KB pages
- Enable Rust on arm64
- Support for the 2023 dpISA extensions (data processing ISA), host
only
- arm64 perf updates:
- StarFive's StarLink (integrates one or more CPU cores with a
shared L3 memory system) PMU support
- Enable HiSilicon Erratum 162700402 quirk for HIP09
- Several updates for the HiSilicon PCIe PMU driver
- Arm CoreSight PMU support
- Convert all drivers under drivers/perf/ to use .remove_new()
- Miscellaneous:
- Don't enable workarounds for "rare" errata by default
- Clean up the DAIF flags handling for EL0 returns (in preparation
for NMI support)
- Kselftest update for ptrace()
- Update some of the sysreg field definitions
- Slight improvement in the code generation for inline asm I/O
accessors to permit offset addressing
- kretprobes: acquire regs via a BRK exception (previously done
via a trampoline handler)
- SVE/SME cleanups, comment updates
- Allow CALL_OPS+CC_OPTIMIZE_FOR_SIZE with clang (previously
disabled due to gcc silently ignoring -falign-functions=N)"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (134 commits)
Revert "mm: add arch hook to validate mmap() prot flags"
Revert "arm64: mm: add support for WXN memory translation attribute"
Revert "ARM64: Dynamically allocate cpumasks and increase supported CPUs to 512"
ARM64: Dynamically allocate cpumasks and increase supported CPUs to 512
kselftest/arm64: Add 2023 DPISA hwcap test coverage
kselftest/arm64: Add basic FPMR test
kselftest/arm64: Handle FPMR context in generic signal frame parser
arm64/hwcap: Define hwcaps for 2023 DPISA features
arm64/ptrace: Expose FPMR via ptrace
arm64/signal: Add FPMR signal handling
arm64/fpsimd: Support FEAT_FPMR
arm64/fpsimd: Enable host kernel access to FPMR
arm64/cpufeature: Hook new identification registers up to cpufeature
docs: perf: Fix build warning of hisi-pcie-pmu.rst
perf: starfive: Only allow COMPILE_TEST for 64-bit architectures
MAINTAINERS: Add entry for StarFive StarLink PMU
docs: perf: Add description for StarFive's StarLink PMU
dt-bindings: perf: starfive: Add JH8100 StarLink PMU
perf: starfive: Add StarLink PMU support
docs: perf: Update usage for target filter of hisi-pcie-pmu
...
Pull sound updates from Takashi Iwai:
"This was a relatively calm development cycle. Most of changes are
rather small device-specific fixes and enhancements. The only
significant changes in ALSA core are code refactoring with the recent
cleanup infrastructure, which should bring no functionality changes.
Some highlights below:
Core:
- Lots of cleanups in ALSA core code with automatic kfree cleanup and
locking guard macros
- New ALSA core kunit test
ASoC:
- SoundWire support for AMD ACP 6.3 systems
- Support for reporting version information for AVS firmware
- Support DSPless mode for Intel Soundwire systems
- Support for configuring CS35L56 amplifiers using EFI calibration
data
- Log which component is being operated on as part of power
management trace events.
- Support for Microchip SAM9x7, NXP i.MX95 and Qualcomm WCD939x
HD- and USB-audio:
- More Cirrus HD-audio codec support
- TAS2781 HD-audio codec fixes
- Scarlett2 mixer fixes
Others:
- Enhancement of virtio driver for audio control supports
- Cleanups of legacy PM code with new macros
- Firewire sound updates"
* tag 'sound-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (307 commits)
ALSA: usb-audio: Stop parsing channels bits when all channels are found.
ALSA: hda/tas2781: remove unnecessary runtime_pm calls
ALSA: hda/realtek - ALC236 fix volume mute & mic mute LED on some HP models
ALSA: aaci: Delete unused variable in aaci_do_suspend
ALSA: scarlett2: Fix Scarlett 4th Gen input gain range again
ALSA: scarlett2: Fix Scarlett 4th Gen input gain range
ALSA: scarlett2: Fix Scarlett 4th Gen autogain status values
ALSA: scarlett2: Fix Scarlett 4th Gen 4i4 low-voltage detection
ALSA: hda/tas2781: restore power state after system_resume
ALSA: hda/tas2781: do not call pm_runtime_force_* in system_resume/suspend
ALSA: hda/tas2781: do not reset cur_* values in runtime_suspend
ALSA: hda/tas2781: add lock to system_suspend
ALSA: hda/tas2781: use dev_dbg in system_resume
ALSA: hda/realtek: fix ALC285 issues on HP Envy x360 laptops
platform/x86: serial-multi-instantiate: Add support for CS35L54 and CS35L57
ALSA: hda: cs35l56: Add support for CS35L54 and CS35L57
ASoC: cs35l56: Add support for CS35L54 and CS35L57
ASoC: Intel: catpt: Carefully use PCI bitwise constants
ALSA: hda: hda_component: Include sound/hda_codec.h
ALSA: hda: hda_component: Add missing #include guards
...
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Consolidate interrupt related code in irq.c (Ilpo Järvinen)
- Reduce kernel size by replacing sysfs resource macros with
functions (Ilpo Järvinen)
- Reduce kernel size by compiling sysfs support only when
CONFIG_SYSFS=y (Lukas Wunner)
- Avoid using Extended Tags on 3ware-9650SE Root Port to work around
an apparent hardware defect (Jörg Wedekind)
Resource management:
- Fix an MMIO mapping leak in pci_iounmap() (Philipp Stanner)
- Move pci_iomap.c and other PCI-specific devres code to drivers/pci
(Philipp Stanner)
- Consolidate PCI devres code in devres.c (Philipp Stanner)
Power management:
- Avoid D3cold on Asus B1400 PCI-NVMe bridge, where firmware doesn't
know how to return correctly to D0, and remove previous quirk that
wasn't as specific (Daniel Drake)
- Allow runtime PM when the driver enables it but doesn't need any
runtime PM callbacks (Raag Jadav)
- Drain runtime-idle callbacks before driver removal to avoid races
between .remove() and .runtime_idle(), which caused intermittent
page faults when the rtsx .runtime_idle() accessed registers that
its .remove() had already unmapped (Rafael J. Wysocki)
Virtualization:
- Avoid Secondary Bus Reset on LSI FW643 so it can be assigned to VMs
with VFIO, e.g., for professional audio software on many Apple
machines, at the cost of leaking state between VMs (Edmund Raile)
Error handling:
- Print all logged TLP Prefixes, not just the first, after AER or DPC
errors (Ilpo Järvinen)
- Quirk the DPC PIO log size for Intel Raptor Lake Root Ports, which
still don't advertise a legal size (Paul Menzel)
- Ignore expected DPC Surprise Down errors on hot removal (Smita
Koralahalli)
- Block runtime suspend while handling AER errors to avoid races that
prevent the device form being resumed from D3hot (Stanislaw
Gruszka)
Peer-to-peer DMA:
- Use atomic XA allocation in RCU read section (Christophe JAILLET)
ASPM:
- Collect bits of ASPM-related code that we need even without
CONFIG_PCIEASPM into aspm.c (David E. Box)
- Save/restore L1 PM Substates config for suspend/resume (David E.
Box)
- Update save_save when ASPM config is changed, so a .slot_reset()
during error recovery restores the changed config, not the
.probe()-time config (Vidya Sagar)
Endpoint framework:
- Refactor and improve pci_epf_alloc_space() API (Niklas Cassel)
- Clean up endpoint BAR descriptions (Niklas Cassel)
- Fix ntb_register_device() name leak in error path (Yang Yingliang)
- Return actual error code for pci_vntb_probe() failure (Yang
Yingliang)
Broadcom STB PCIe controller driver:
- Fix MDIO write polling, which previously never waited for
completion (Jonathan Bell)
Cadence PCIe endpoint driver:
- Clear the ARI "Next Function Number" of last function (Jasko-EXT
Wojciech)
Freescale i.MX6 PCIe controller driver:
- Simplify by replacing switch statements with function pointers for
different hardware variants (Frank Li)
- Simplify by using clk_bulk*() API (Frank Li)
- Remove redundant DT clock and reg/reg-name details (Frank Li)
- Add i.MX95 DT and driver support for both Root Complex and Endpoint
mode (Frank Li)
Microsoft Hyper-V host bridge driver:
- Reduce memory usage by limiting ring buffer size to 16KB instead of
4 pages (Michael Kelley)
Qualcomm PCIe controller driver:
- Add X1E80100 DT and driver support (Abel Vesa)
- Add DT 'required-opps' for SoCs that require a minimum performance
level (Johan Hovold)
- Make DT 'msi-map-mask' optional, depending on how MSI interrupts
are mapped (Johan Hovold)
- Disable ASPM L0s for sc8280xp, sa8540p and sa8295p because the PHY
configuration isn't tuned correctly for L0s (Johan Hovold)
- Split dt-binding qcom,pcie.yaml into qcom,pcie-common.yaml and
separate files for SA8775p, SC7280, SC8180X, SC8280XP, SM8150,
SM8250, SM8350, SM8450, SM8550 for easier reviewing (Krzysztof
Kozlowski)
- Enable BDF to SID translation by disabling bypass mode (Manivannan
Sadhasivam)
- Add endpoint MHI support for Snapdragon SA8775P SoC (Mrinmay
Sarkar)
Synopsys DesignWare PCIe controller driver:
- Allocate 64-bit MSI address if no 32-bit address is available (Ajay
Agarwal)
- Fix endpoint Resizable BAR to actually advertise the required 1MB
size (Niklas Cassel)
MicroSemi Switchtec management driver:
- Release resources if the .probe() fails (Christophe JAILLET)
Miscellaneous:
- Make pcie_port_bus_type const (Ricardo B. Marliere)"
* tag 'pci-v6.9-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (77 commits)
PCI/ASPM: Update save_state when configuration changes
PCI/ASPM: Disable L1 before configuring L1 Substates
PCI/ASPM: Call pci_save_ltr_state() from pci_save_pcie_state()
PCI/ASPM: Save L1 PM Substates Capability for suspend/resume
PCI: hv: Fix ring buffer size calculation
PCI: dwc: endpoint: Fix advertised resizable BAR size
PCI: cadence: Clear the ARI Capability Next Function Number of the last function
PCI: dwc: Strengthen the MSI address allocation logic
PCI: brcmstb: Fix broken brcm_pcie_mdio_write() polling
PCI: qcom: Add X1E80100 PCIe support
dt-bindings: PCI: qcom: Document the X1E80100 PCIe Controller
PCI: qcom: Enable BDF to SID translation properly
PCI/AER: Generalize TLP Header Log reading
PCI/AER: Use explicit register size for PCI_ERR_CAP
PCI: qcom: Disable ASPM L0s for sc8280xp, sa8540p and sa8295p
dt-bindings: PCI: qcom: Do not require 'msi-map-mask'
dt-bindings: PCI: qcom: Allow 'required-opps'
PCI/AER: Block runtime suspend when handling errors
PCI/ASPM: Move pci_save_ltr_state() to aspm.c
PCI/ASPM: Always build aspm.c
...
Pull LED updates from Lee Jones:
"Core Framework:
- Introduce ExpressWire library
New Drivers:
- Add support for ON Semiconductor NCP5623 RGB LED Driver
New Device Support:
- Add support for PM660L to Qualcomm's LPG driver
New Functionality:
- Dynamically load modules required for the default-trigger
- Add some support for suspend and resume
- Allow LEDs to remain lit during suspend
Fix-ups:
- Device Tree binding adaptions/conversions/creation
- Fix include lists; alphabetise, remove unused, explicitly add used
- Add new led_match_default_trigger to avoid duplication
- Add module alias' to aid auto-loading
- Default to hw_control if no others are specified
- De-bloat the supported link speed attribute lists
- Remove superfluous code and simplify overall
- Constify some variables
Bug Fixes:
- Prevent kernel panic when renaming the net interface
- Fix Kconfig related build errors
- Ensure mutexes are unlocked prior to destroying them
- Provide clean-up between state changes to avoid invalid state
- Fix some broken kernel-doc headers"
* tag 'leds-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (41 commits)
leds: ncp5623: Add MS suffix to time defines
leds: Add NCP5623 multi-led driver
dt-bindings: leds: Add NCP5623 multi-LED Controller
leds: mlxreg: Drop an excess struct mlxreg_led_data member
leds: leds-mlxcpld: Fix struct mlxcpld_led_priv member name
leds: lm3601x: Fix struct lm3601_led kernel-doc warnings
leds: Fix ifdef check for gpio_led_register_device()
dt-bindings: leds: qcom-lpg: Narrow nvmem for other variants
dt-bindings: leds: qcom-lpg: Drop redundant qcom,pm8550-pwm in if:then:
dt-bindings: leds: Add LED_FUNCTION_WAN_ONLINE for Internet access
leds: sgm3140: Add missing timer cleanup and flash gpio control
leds: expresswire: Don't depend on NEW_LEDS
Revert "leds: Only descend into leds directory when CONFIG_NEW_LEDS is set"
leds: aw2013: Unlock mutex before destroying it
leds: qcom-lpg: Add QCOM_PBS dependency
leds: rgb: leds-group-multicolor: Allow LEDs to stay on in suspend
leds: trigger: netdev: Fix kernel panic on interface rename trig notify
leds: qcom-lpg: Add PM660L configuration and compatible
leds: spi-byte: Use devm_led_classdev_register_ext()
leds: pca963x: Add support for suspend and resume
...
Pull MFD updates from Lee Jones:
"New Device Support:
- Add support for Watchdog to ChromeOS Embedded Controller
- Add support for GPIOs to ChromeOS Embedded Controller
- Add supprt for Sound to MediaTek MT6357 CODEC
New Functionality:
- Add power-off functionality to Texas Instruments TWL series CODECs
Fix-ups:
- Device Tree binding adaptions/conversions/creation
- Use/convert to new/better APIs/helpers/MACROs instead of
hand-rolling implementations
- Trivial; spelling, whitespace, clean-ups, etc
- Remove superfluous code and simplify overall
- Fix include lists; alphabetise, remove unused, explicitly add used
- Use dev_err_probe() to clean-up error paths
- Convert used cache type over to the Maple Tree in many instances
- Constify a bunch of static structs
- Refrain from over-riding resources provided via the firmware
Bug Fixes:
- Fix a clock related firmware bug on Dell XPS 9530 et al.
- Repair incorrect IRQ designations
- Increase buffer sizes to omit various snprintf compiler errors
- Ensure errors are handled properly
- Balance references and prevent resource leaks
- Rectify Power Key interrupt processing
- Fix Kconfig related build errors
- Correct a bunch of register start-up default values"
* tag 'mfd-next-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (65 commits)
mfd: cs42l43: Fix wrong GPIO_FN_SEL and SPI_CLK_CONFIG1 defaults
mfd: cs42l43: Fix wrong register defaults
mfd: mt6397-core: Register mt6357 sound codec
dt-bindings: mfd: syscon: Add ti,am62-usb-phy-ctrl compatible
dt-bindings: mfd: dlg,da9063: Make #interrupt-cells required
dt-bindings: mfd: Convert atmel-flexcom to json-schema
mfd: kempld-core: Don't replace resources provided by ACPI
mfd: cros_ec_dev: Add GPIO device if feature present on EC
dt-bindings: mfd: cros-ec: Add properties for GPIO controller
mfd: twl: Select MFD_CORE
mfd: core: Constify the struct device_type usage
mfd: rk8xx-core: Fix interrupt processing order for power key button
mfd: twl4030-power: Accept standard property for power controller
mfd: twl-core: Add power off implementation for twl603x
dt-bindings: mfd: ti,twl: Document system-power-controller
mfd: altera-sysmgr: Call of_node_put() only when of_parse_phandle() takes a ref
mfd: syscon: Remove extern from function prototypes
mfd: syscon: Call of_node_put() only when of_parse_phandle() takes a ref
mfd: mc13xxx: Use bitfield helpers
mfd: rc5t583: Convert to use maple tree register cache
...
Pull pin control updates from Linus Walleij:
"No core changes this time around.
New drivers:
- New driver for Renesas R8A779H0 also known as R-Car V4M.
- New driver for the Awinic AW9523/B I2C GPIO expander. I found this
living out-of-tree in OpenWrt as an upstream attempt had stalled on
the finishing line, so I picked it up and finished the job.
Improvements:
- The Nomadik pin control driver was for years re-used out of tree
for the ST STA chips, and now the IP was re-used in a MIPS
automotive SoC called MobilEyeq5, so it has been split in pin
control and GPIO drivers so the latter can be reused by MobilEyeq5.
(Along with a long list of cleanups)
- A lot of overall cleanup and tidying up"
* tag 'pinctrl-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (87 commits)
drivers/gpio/nomadik: move dummy nmk_gpio_dbg_show_one() to header
gpio: nomadik: remove BUG_ON() in nmk_gpio_populate_chip()
dt-bindings: pinctrl: qcom: update compatible name for match with driver
pinctrl: aw9523: Make the driver tristate
pinctrl: nomadik: fix dereference of error pointer
gpio: nomadik: Back out some managed resources
pinctrl: aw9523: Add proper terminator
pinctrl: core: comment that pinctrl_add_gpio_range() is deprecated
pinctrl: pinmux: Suppress error message for -EPROBE_DEFER
pinctrl: Add driver for Awinic AW9523/B I2C GPIO Expander
dt-bindings: pinctrl: Add bindings for Awinic AW9523/AW9523B
gpio: nomadik: Finish conversion to use firmware node APIs
gpio: nomadik: fix Kconfig dependencies inbetween pinctrl & GPIO
pinctrl: da9062: Add OF table
dt-bindings: pinctrl: at91: add sam9x7
pinctrl: ocelot: remove redundant assignment to variable ret
gpio: nomadik: grab optional reset control and deassert it at probe
gpio: nomadik: support mobileye,eyeq5-gpio
gpio: nomadik: handle variadic GPIO count
gpio: nomadik: support shared GPIO IRQs
...
Pull auxdisplay updates from Andy Shevchenko:
- New driver for GPIO based 7-segment LED display (Chris Packham)
- New driver for Maxim MAX6958/6959 I²C 7-segment LED display
controller
- Refactor linedisp library to make the above happen
- Update Holtek HT16k33 driver to follow the linedisp refactoring
- Convert .remove to return void in platform drivers (Uwe Kleine-König)
- Fix DT schemas (Krzysztof Kozlowski)
- Refresh MAINTAINERS database
* tag 'auxdisplay-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-auxdisplay: (27 commits)
auxdisplay: img-ascii-lcd: Convert to platform remove callback returning void
auxdisplay: hd44780: Convert to platform remove callback returning void
auxdisplay: cfag12864bfb: Convert to platform remove callback returning void
auxdisplay: seg-led-gpio: Import linedisp namespace
dt-bindings: auxdisplay: Add bindings for generic 7-segment LED
auxdisplay: Add 7-segment LED display driver
auxdisplay: Add driver for MAX695x 7-segment LED controllers
dt-bindings: auxdisplay: Add Maxim MAX6958/6959
auxdisplay: ht16k33: Drop struct ht16k33_seg
auxdisplay: ht16k33: Switch to use line display character mapping
auxdisplay: ht16k33: Define a few helper macros
auxdisplay: ht16k33: Move ht16k33_linedisp_ops down
auxdisplay: ht16k33: Add default to switch-cases
auxdisplay: linedisp: Allocate buffer for the string
auxdisplay: linedisp: Add support for overriding character mapping
auxdisplay: linedisp: Provide struct linedisp_ops for future extension
auxdisplay: linedisp: Move exported symbols to a namespace
auxdisplay: linedisp: Add missing header(s)
auxdisplay: linedisp: Unshadow error codes in ->store()
auxdisplay: linedisp: Use unique number for id
...
