The test toggles the carrier of a bridge port in order to test the
bridge backup port feature.
Due to the linkwatch delayed work the carrier change is not always
reflected fast enough to the bridge driver and packets are not forwarded
as the test expects, resulting in failures [1].
Fix by busy waiting on the bridge port state until it changes to the
desired state following the carrier change.
[1]
# Backup port
# -----------
[...]
# TEST: swp1 carrier off [ OK ]
# TEST: No forwarding out of swp1 [FAIL]
[ 641.995910] br0: port 1(swp1) entered disabled state
# TEST: No forwarding out of vx0 [ OK ]
Fixes: b408453053 ("selftests: net: Add bridge backup port and backup nexthop ID test")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240208123110.1063930-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Paolo Abeni:
"Including fixes from WiFi and netfilter.
Current release - regressions:
- nic: intel: fix old compiler regressions
- netfilter: ipset: missing gc cancellations fixed
Current release - new code bugs:
- netfilter: ctnetlink: fix filtering for zone 0
Previous releases - regressions:
- core: fix from address in memcpy_to_iter_csum()
- netfilter: nfnetlink_queue: un-break NF_REPEAT
- af_unix: fix memory leak for dead unix_(sk)->oob_skb in GC.
- devlink: avoid potential loop in devlink_rel_nested_in_notify_work()
- iwlwifi:
- mvm: fix a battery life regression
- fix double-free bug
- mac80211: fix waiting for beacons logic
- nic: nfp: flower: prevent re-adding mac index for bonded port
Previous releases - always broken:
- rxrpc: fix generation of serial numbers to skip zero
- tipc: check the bearer type before calling tipc_udp_nl_bearer_add()
- tunnels: fix out of bounds access when building IPv6 PMTU error
- nic: hv_netvsc: register VF in netvsc_probe if NET_DEVICE_REGISTER
missed
- nic: atlantic: fix DMA mapping for PTP hwts ring
Misc:
- selftests: more fixes to deal with very slow hosts"
* tag 'net-6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (80 commits)
netfilter: nft_set_pipapo: remove scratch_aligned pointer
netfilter: nft_set_pipapo: add helper to release pcpu scratch area
netfilter: nft_set_pipapo: store index in scratch maps
netfilter: nft_set_rbtree: skip end interval element from gc
netfilter: nfnetlink_queue: un-break NF_REPEAT
netfilter: nf_tables: use timestamp to check for set element timeout
netfilter: nft_ct: reject direction for ct id
netfilter: ctnetlink: fix filtering for zone 0
s390/qeth: Fix potential loss of L3-IP@ in case of network issues
netfilter: ipset: Missing gc cancellations fixed
octeontx2-af: Initialize maps.
net: ethernet: ti: cpsw: enable mac_managed_pm to fix mdio
net: ethernet: ti: cpsw_new: enable mac_managed_pm to fix mdio
netfilter: nft_set_pipapo: remove static in nft_pipapo_get()
netfilter: nft_compat: restrict match/target protocol to u16
netfilter: nft_compat: reject unused compat flag
netfilter: nft_compat: narrow down revision to unsigned 8-bits
net: intel: fix old compiler regressions
MAINTAINERS: Maintainer change for rds
selftests: cmsg_ipv6: repeat the exact packet
...
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Narrow down target/match revision to u8 in nft_compat.
2) Bail out with unused flags in nft_compat.
3) Restrict layer 4 protocol to u16 in nft_compat.
4) Remove static in pipapo get command that slipped through when
reducing set memory footprint.
5) Follow up incremental fix for the ipset performance regression,
this includes the missing gc cancellation, from Jozsef Kadlecsik.
6) Allow to filter by zone 0 in ctnetlink, do not interpret zone 0
as no filtering, from Felix Huettner.
7) Reject direction for NFT_CT_ID.
8) Use timestamp to check for set element expiration while transaction
is handled to prevent garbage collection from removing set elements
that were just added by this transaction. Packet path and netlink
dump/get path still use current time to check for expiration.
9) Restore NF_REPEAT in nfnetlink_queue, from Florian Westphal.
10) map_index needs to be percpu and per-set, not just percpu.
At this time its possible for a pipapo set to fill the all-zero part
with ones and take the 'might have bits set' as 'start-from-zero' area.
From Florian Westphal. This includes three patches:
- Change scratchpad area to a structure that provides space for a
per-set-and-cpu toggle and uses it of the percpu one.
- Add a new free helper to prepare for the next patch.
- Remove the scratch_aligned pointer and makes AVX2 implementation
use the exact same memory addresses for read/store of the matching
state.
netfilter pull request 24-02-08
* tag 'nf-24-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_set_pipapo: remove scratch_aligned pointer
netfilter: nft_set_pipapo: add helper to release pcpu scratch area
netfilter: nft_set_pipapo: store index in scratch maps
netfilter: nft_set_rbtree: skip end interval element from gc
netfilter: nfnetlink_queue: un-break NF_REPEAT
netfilter: nf_tables: use timestamp to check for set element timeout
netfilter: nft_ct: reject direction for ct id
netfilter: ctnetlink: fix filtering for zone 0
netfilter: ipset: Missing gc cancellations fixed
netfilter: nft_set_pipapo: remove static in nft_pipapo_get()
netfilter: nft_compat: restrict match/target protocol to u16
netfilter: nft_compat: reject unused compat flag
netfilter: nft_compat: narrow down revision to unsigned 8-bits
====================
Link: https://lore.kernel.org/r/20240208112834.1433-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pull kvm fixes from Paolo Bonzini:
"x86 guest:
- Avoid false positive for check that only matters on AMD processors
x86:
- Give a hint when Win2016 might fail to boot due to XSAVES &&
!XSAVEC configuration
- Do not allow creating an in-kernel PIT unless an IOAPIC already
exists
RISC-V:
- Allow ISA extensions that were enabled for bare metal in 6.8 (Zbc,
scalar and vector crypto, Zfh[min], Zihintntl, Zvfh[min], Zfa)
S390:
- fix CC for successful PQAP instruction
- fix a race when creating a shadow page"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
x86/coco: Define cc_vendor without CONFIG_ARCH_HAS_CC_PLATFORM
x86/kvm: Fix SEV check in sev_map_percpu_data()
KVM: x86: Give a hint when Win2016 might fail to boot due to XSAVES erratum
KVM: x86: Check irqchip mode before create PIT
KVM: riscv: selftests: Add Zfa extension to get-reg-list test
RISC-V: KVM: Allow Zfa extension for Guest/VM
KVM: riscv: selftests: Add Zvfh[min] extensions to get-reg-list test
RISC-V: KVM: Allow Zvfh[min] extensions for Guest/VM
KVM: riscv: selftests: Add Zihintntl extension to get-reg-list test
RISC-V: KVM: Allow Zihintntl extension for Guest/VM
KVM: riscv: selftests: Add Zfh[min] extensions to get-reg-list test
RISC-V: KVM: Allow Zfh[min] extensions for Guest/VM
KVM: riscv: selftests: Add vector crypto extensions to get-reg-list test
RISC-V: KVM: Allow vector crypto extensions for Guest/VM
KVM: riscv: selftests: Add scaler crypto extensions to get-reg-list test
RISC-V: KVM: Allow scalar crypto extensions for Guest/VM
KVM: riscv: selftests: Add Zbc extension to get-reg-list test
RISC-V: KVM: Allow Zbc extension for Guest/VM
KVM: s390: fix cc for successful PQAP
KVM: s390: vsie: fix race during shadow creation
cmsg_ipv6 test requests tcpdump to capture 4 packets,
and sends until tcpdump quits. Only the first packet
is "real", however, and the rest are basic UDP packets.
So if tcpdump doesn't start in time it will miss
the real packet and only capture the UDP ones.
This makes the test fail on slow machine (no KVM or with
debug enabled) 100% of the time, while it passes in fast
environments.
Repeat the "real" / expected packet.
Fixes: 9657ad09e1 ("selftests: net: test IPV6_TCLASS")
Fixes: 05ae83d5a4 ("selftests: net: test IPV6_HOPLIMIT")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Drop dirty_log_page_splitting_test's assertion that the number of 4KiB
pages remains the same across dirty logging being enabled and disabled, as
the test doesn't guarantee that mappings outside of the memslots being
dirty logged are stable, e.g. KVM's mappings for code and pages in
memslot0 can be zapped by things like NUMA balancing.
To preserve the spirit of the check, assert that (a) the number of 4KiB
pages after splitting is _at least_ the number of 4KiB pages across all
memslots under test, and (b) the number of hugepages before splitting adds
up to the number of pages across all memslots under test. (b) is a little
tenuous as it relies on memslot0 being incompatible with transparent
hugepages, but that holds true for now as selftests explicitly madvise()
MADV_NOHUGEPAGE for memslot0 (__vm_create() unconditionally specifies the
backing type as VM_MEM_SRC_ANONYMOUS).
Reported-by: Yi Lai <yi1.lai@intel.com>
Reported-by: Tao Su <tao1.su@linux.intel.com>
Reviewed-by: Tao Su <tao1.su@linux.intel.com>
Link: https://lore.kernel.org/r/20240131222728.4100079-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When finishing the final iteration of dirty_log_test testcase, set
host_quit _before_ the final "continue" so that the vCPU worker doesn't
run an extra iteration, and delete the hack-a-fix of an extra "continue"
from the dirty ring testcase. This fixes a bug where the extra post to
sem_vcpu_cont may not be consumed, which results in failures in subsequent
runs of the testcases. The bug likely was missed during development as
x86 supports only a single "guest mode", i.e. there aren't any subsequent
testcases after the dirty ring test, because for_each_guest_mode() only
runs a single iteration.
For the regular dirty log testcases, letting the vCPU run one extra
iteration is a non-issue as the vCPU worker waits on sem_vcpu_cont if and
only if the worker is explicitly told to stop (vcpu_sync_stop_requested).
But for the dirty ring test, which needs to periodically stop the vCPU to
reap the dirty ring, letting the vCPU resume the guest _after_ the last
iteration means the vCPU will get stuck without an extra "continue".
However, blindly firing off an post to sem_vcpu_cont isn't guaranteed to
be consumed, e.g. if the vCPU worker sees host_quit==true before resuming
the guest. This results in a dangling sem_vcpu_cont, which leads to
subsequent iterations getting out of sync, as the vCPU worker will
continue on before the main task is ready for it to resume the guest,
leading to a variety of asserts, e.g.
==== Test Assertion Failure ====
dirty_log_test.c:384: dirty_ring_vcpu_ring_full
pid=14854 tid=14854 errno=22 - Invalid argument
1 0x00000000004033eb: dirty_ring_collect_dirty_pages at dirty_log_test.c:384
2 0x0000000000402d27: log_mode_collect_dirty_pages at dirty_log_test.c:505
3 (inlined by) run_test at dirty_log_test.c:802
4 0x0000000000403dc7: for_each_guest_mode at guest_modes.c:100
5 0x0000000000401dff: main at dirty_log_test.c:941 (discriminator 3)
6 0x0000ffff9be173c7: ?? ??:0
7 0x0000ffff9be1749f: ?? ??:0
8 0x000000000040206f: _start at ??:?
Didn't continue vcpu even without ring full
Alternatively, the test could simply reset the semaphores before each
testcase, but papering over hacks with more hacks usually ends in tears.
Reported-by: Shaoqin Huang <shahuang@redhat.com>
Fixes: 84292e5659 ("KVM: selftests: Add dirty ring buffer test")
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Link: https://lore.kernel.org/r/20240202231831.354848-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Leverage previously added MOCK_FLAGS_DEVICE_HUGE_IOVA flag to create an
IOMMU domain with more than MOCK_IO_PAGE_SIZE supported.
Plumb the hugetlb backing memory for buffer allocation and change the
expected page size to MOCK_HUGE_PAGE_SIZE (1M) when hugepage variant test
cases are used. These so far are limited to 128M and 256M IOVA range tests
cases which is when 1M hugepages can be used.
Link: https://lore.kernel.org/r/20240202133415.23819-9-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Rework the functions that test and set the bitmaps to receive a new
parameter (the pte_page_size) that reflects the expected PTE size in the
page tables. The same scheme is still used i.e. even bits are dirty and
odd page indexes aren't dirty. Here it just refactors to consider the size
of the PTE rather than hardcoded to IOMMU mock base page assumptions.
While at it, refactor dirty bitmap tests to use the idev_id created by the
fixture instead of creating a new one.
This is in preparation for doing tests with IOMMU hugepages where multiple
bits set as part of recording a whole hugepage as dirty and thus the
pte_page_size will vary depending on io hugepages or io base pages.
Link: https://lore.kernel.org/r/20240202133415.23819-6-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Exercise the dirty tracking bitmaps with byte unaligned addresses in
addition to the PAGE_SIZE unaligned bitmaps, using a address towards the
end of the page boundary.
In doing so, increase the tailroom we allocate for the bitmap from
MOCK_PAGE_SIZE(2K) into PAGE_SIZE(4K), such that we can test end of bitmap
boundary.
Link: https://lore.kernel.org/r/20240202133415.23819-4-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Selftests here check not only that connect()/accept() for
TCP-AO/TCP-MD5/non-signed-TCP combinations do/don't establish
connections, but also counters: those are per-AO-key, per-socket and
per-netns.
The counters are checked on the server's side, as the server listener
has TCP-AO/TCP-MD5/no keys for different peers. All tests run in
the same namespaces with the same veth pair, created in test_init().
After close() in both client and server, the sides go through
the regular FIN/ACK + FIN/ACK sequence, which goes in the background.
If the selftest has already started a new testing scenario, read
per-netns counters - it may fail in the end iff it doesn't expect
the TCPAOGood per-netns counters go up during the test.
Let's just kill both TCP-AO sides - that will avoid any asynchronous
background TCP-AO segments going to either sides.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/all/20240201132153.4d68f45e@kernel.org/T/#u
Fixes: 6f0c472a68 ("selftests/net: Add TCP-AO + TCP-MD5 + no sign listen socket tests")
Signed-off-by: Dmitry Safonov <dima@arista.com>
Link: https://lore.kernel.org/r/20240202-unsigned-md5-netns-counters-v1-1-8b90c37c0566@arista.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In very slow environments, most big TCP cases including
segmentation and reassembly of big TCP packets have a good
chance to fail: by default the TCP client uses write size
well below 64K. If the host is low enough autocorking is
unable to build real big TCP packets.
Address the issue using much larger write operations.
Note that is hard to observe the issue without an extremely
slow and/or overloaded environment; reduce the TCP transfer
time to allow for much easier/faster reproducibility.
Fixes: 6bb382bcf7 ("selftests: add a selftest for big tcp")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Calling get_system_loc_code before checking devfd and errno fails the test
when the device is not available, the expected behaviour is a SKIP.
Change the order of 'SKIP_IF_MSG' to correctly SKIP when the /dev/
papr-vpd device is not available.
Test output before:
Test FAILED on line 271
Test output after:
[SKIP] Test skipped on line 266: /dev/papr-vpd not present
Signed-off-by: R Nageswara Sastry <rnsastry@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240131130859.14968-1-rnsastry@linux.ibm.com
Using hard-coded constant timeout to wait for some expected
event is deemed to fail sooner or later, especially in slow
env.
Our CI has spotted another of such race:
# TEST: ipv6: cleanup of cached exceptions - nexthop objects [FAIL]
# can't delete veth device in a timely manner, PMTU dst likely leaked
Replace the crude sleep with a loop looking for the expected condition
at low interval for a much longer range.
Fixes: b3cc4f8a8a ("selftests: pmtu: add explicit tests for PMTU exceptions cleanup")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/fd5c745e9bb665b724473af6a9373a8c2a62b247.1706812005.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The pmtu.sh test uses a few TCP listener in a problematic way:
It hard-codes a constant timeout to wait for the listener starting-up
in background. That introduces unneeded latency and on very slow and
busy host it can fail.
Additionally the test starts again the same listener in the same
namespace on the same port, just after the previous connection
completed. Fast host can attempt starting the new server before the
old one really closed the socket.
Address the issues using the wait_local_port_listen helper and
explicitly waiting for the background listener process exit.
Fixes: 136a1b434b ("selftests: net: test vxlan pmtu exceptions with tcp")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/f8e8f6d44427d8c45e9f6a71ee1a321047452087.1706812005.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The udpgro_fwd.sh self-tests are somewhat unstable. There are
a few timing constraints the we struggle to meet on very slow
environments.
Instead of skipping the whole tests in such envs, increase the
test resilience WRT very slow hosts: increase the inter-packets
timeouts, avoid resetting the counters every second and finally
disable reduce the background traffic noise.
Tested with:
for I in $(seq 1 100); do
./tools/testing/selftests/kselftest_install/run_kselftest.sh \
-t net:udpgro_fwd.sh || exit -1
done
in a slow environment.
Fixes: a062260a9d ("selftests: net: add UDP GRO forwarding self-tests")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/f4b6b11064a0d39182a9ae6a853abae3e9b4426a.1706812005.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
CAP_NET_ADMIN allows to configure network interfaces, not CAP_SYS_ADMIN
which only allows to call unshare(2). Without this change, running
network tests as a non-root user but with all capabilities would fail at
the setup_loopback() step with "RTNETLINK answers: Operation not
permitted".
The issue is only visible when running tests with non-root users (i.e.
only relying on ambient capabilities). Indeed, when configuring the
network interface, the "ip" command is called, which may lead to the
special handling of capabilities for the root user by execve(2). If
root is the caller, then the inherited, permitted and effective
capabilities are all reset, which then includes CAP_NET_ADMIN. However,
if a non-root user is the caller, then ambient capabilities are masked
by the inherited ones, which were explicitly dropped.
To make execution deterministic whatever users are running the tests,
set the noroot secure bit for each test, and set the inheritable and
ambient capabilities to CAP_NET_ADMIN, the only capability that may be
required after an execve(2).
Factor out _effective_cap() into _change_cap(), and use it to manage
ambient capabilities with the new set_ambient_cap() and
clear_ambient_cap() helpers.
This makes it possible to run all Landlock tests with check-linux.sh
from https://github.com/landlock-lsm/landlock-test-tools
Cc: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Fixes: a549d055a2 ("selftests/landlock: Add network tests")
Link: https://lore.kernel.org/r/20240125153230.3817165-2-mic@digikod.net
[mic: Make sure SECBIT_NOROOT_LOCKED is set]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter.
As Paolo promised we continue to hammer out issues in our selftests.
This is not the end but probably the peak.
Current release - regressions:
- smc: fix incorrect SMC-D link group matching logic
Current release - new code bugs:
- eth: bnxt: silence WARN() when device skips a timestamp, it happens
Previous releases - regressions:
- ipmr: fix null-deref when forwarding mcast packets
- conntrack: evaluate window negotiation only for packets in the
REPLY direction, otherwise SYN retransmissions trigger incorrect
window scale negotiation
- ipset: fix performance regression in swap operation
Previous releases - always broken:
- tcp: add sanity checks to types of pages getting into the rx
zerocopy path, we only support basic NIC -> user, no page cache
pages etc.
- ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()
- nt_tables: more input sanitization changes
- dsa: mt7530: fix 10M/100M speed on MediaTek MT7988 switch
- bridge: mcast: fix loss of snooping after long uptime, jiffies do
wrap on 32bit
- xen-netback: properly sync TX responses, protect with locking
- phy: mediatek-ge-soc: sync calibration values with MediaTek SDK,
increase connection stability
- eth: pds: fixes for various teardown, and reset races
Misc:
- hsr: silence WARN() if we can't alloc supervision frame, it
happens"
* tag 'net-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (82 commits)
doc/netlink/specs: Add missing attr in rt_link spec
idpf: avoid compiler padding in virtchnl2_ptype struct
selftests: mptcp: join: stop transfer when check is done (part 2)
selftests: mptcp: join: stop transfer when check is done (part 1)
selftests: mptcp: allow changing subtests prefix
selftests: mptcp: decrease BW in simult flows
selftests: mptcp: increase timeout to 30 min
selftests: mptcp: add missing kconfig for NF Mangle
selftests: mptcp: add missing kconfig for NF Filter in v6
selftests: mptcp: add missing kconfig for NF Filter
mptcp: fix data re-injection from stale subflow
selftests: net: enable some more knobs
selftests: net: add missing config for NF_TARGET_TTL
selftests: forwarding: List helper scripts in TEST_FILES Makefile variable
selftests: net: List helper scripts in TEST_FILES Makefile variable
selftests: net: Remove executable bits from library scripts
selftests: bonding: Check initial state
selftests: team: Add missing config options
hv_netvsc: Fix race condition between netvsc_probe and netvsc_remove
xen-netback: properly sync TX responses
...
Pull HID fixes from Benjamin Tissoires:
- cleanups in the error path in hid-steam (Dan Carpenter)
- fixes for Wacom tablets selftests that sneaked in while the CI was
taking a break during the year end holidays (Benjamin Tissoires)
- null pointer check in nvidia-shield (Kunwu Chan)
- memory leak fix in hidraw (Su Hui)
- another null pointer fix in i2c-hid-of (Johan Hovold)
- another memory leak fix in HID-BPF this time, as well as a double
fdget() fix reported by Dan Carpenter (Benjamin Tissoires)
- fix for Cirque touchpad when they go on suspend (Kai-Heng Feng)
- new device ID in hid-logitech-hidpp: "Logitech G Pro X SuperLight 2"
(Jiri Kosina)
* tag 'hid-for-linus-2024020101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: bpf: use __bpf_kfunc instead of noinline
HID: bpf: actually free hdev memory after attaching a HID-BPF program
HID: bpf: remove double fdget()
HID: i2c-hid-of: fix NULL-deref on failed power up
HID: hidraw: fix a problem of memory leak in hidraw_release()
HID: i2c-hid: Skip SET_POWER SLEEP for Cirque touchpad on system suspend
HID: nvidia-shield: Add missing null pointer checks to LED initialization
HID: logitech-hidpp: add support for Logitech G Pro X Superlight 2
selftests/hid: wacom: fix confidence tests
HID: hid-steam: Fix cleanup in probe()
HID: hid-steam: remove pointless error message
Since the "Fixes" commits mentioned below, the newly added "userspace
pm" subtests of mptcp_join selftests are launching the whole transfer in
the background, do the required checks, then wait for the end of
transfer.
There is no need to wait longer, especially because the checks at the
end of the transfer are ignored (which is fine). This saves quite a few
seconds on slow environments.
While at it, use 'mptcp_lib_kill_wait()' helper everywhere, instead of
on a specific one with 'kill_tests_wait()'.
Fixes: b2e2248f36 ("selftests: mptcp: userspace pm create id 0 subflow")
Fixes: e3b47e460b ("selftests: mptcp: userspace pm remove initial subflow")
Fixes: b9fb176081 ("selftests: mptcp: userspace pm send RM_ADDR for ID 0")
Cc: stable@vger.kernel.org
Reviewed-and-tested-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-9-4c1c11e571ff@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since the "Fixes" commit mentioned below, "userspace pm" subtests of
mptcp_join selftests introduced in v6.5 are launching the whole transfer
in the background, do the required checks, then wait for the end of
transfer.
There is no need to wait longer, especially because the checks at the
end of the transfer are ignored (which is fine). This saves quite a few
seconds in slow environments.
Note that old versions will need commit bdbef0a6ff ("selftests: mptcp:
add mptcp_lib_kill_wait") as well to get 'mptcp_lib_kill_wait()' helper.
Fixes: 4369c198e5 ("selftests: mptcp: test userspace pm out of transfer")
Cc: stable@vger.kernel.org # 6.5.x: bdbef0a6ff: selftests: mptcp: add mptcp_lib_kill_wait
Cc: stable@vger.kernel.org # 6.5.x
Reviewed-and-tested-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-8-4c1c11e571ff@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If a CI executes the same selftest multiple times with different
options, all results from the same subtests will have the same title,
which confuse the CI. With the same title printed in TAP, the tests are
considered as the same ones.
Now, it is possible to override this prefix by using MPTCP_LIB_KSFT_TEST
env var, and have a different title.
While at it, use 'basename' to remove the suffix as well instead of
using an extra 'sed'.
Fixes: c4192967e6 ("selftests: mptcp: lib: format subtests results in TAP")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-7-4c1c11e571ff@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When running the simult_flow selftest in slow environments -- e.g. QEmu
without KVM support --, the results can be unstable. This selftest
checks if the aggregated bandwidth is (almost) fully used as expected.
To help improving the stability while still keeping the same validation
in place, the BW and the delay are reduced to lower the pressure on the
CPU.
Fixes: 1a418cb8e8 ("mptcp: simult flow self-tests")
Fixes: 219d04992b ("mptcp: push pending frames when subflow has free space")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-6-4c1c11e571ff@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On very slow environments -- e.g. when QEmu is used without KVM --,
mptcp_join.sh selftest can take a bit more than 20 minutes. Bump the
default timeout by 50% as it seems normal to take that long on some
environments.
When a debug kernel config is used, this selftest will take even longer,
but that's certainly not a common test env to consider for the timeout.
The Fixes tag that has been picked here is there simply to help having
this patch backported to older stable versions. It is difficult to point
to the exact commit that made some env reaching the timeout from time to
time.
Fixes: d17b968b98 ("selftests: mptcp: increase timeout to 20 minutes")
Cc: stable@vger.kernel.org
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-5-4c1c11e571ff@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since the commit mentioned below, 'mptcp_join' selftests is using
IPTables to add rules to the Filter table.
It is then required to have IP_NF_FILTER KConfig.
This KConfig is usually enabled by default in many defconfig, but we
recently noticed that some CI were running our selftests without them
enabled.
Fixes: 8d014eaa92 ("selftests: mptcp: add ADD_ADDR timeout test case")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
KVM sets up Hyper-V TSC page clocksource for its guests when system
clocksource is 'based on TSC' (see gtod_is_based_on_tsc()), running
hyperv_clock with any other clocksource leads to imminent failure.
Add the missing requirement to make the test skip gracefully.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240109141121.1619463-5-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
KVM's 'gtod_is_based_on_tsc()' recognizes two clocksources: 'tsc' and
'hyperv_clocksource_tsc_page' and enables kvmclock in 'masterclock'
mode when either is in use. Transform 'sys_clocksource_is_tsc()' into
'sys_clocksource_is_based_on_tsc()' to support the later. This affects
two tests: kvm_clock_test and vmx_nested_tsc_scaling_test, both seem
to work well when system clocksource is 'hyperv_clocksource_tsc_page'.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240109141121.1619463-4-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Several existing x86 selftests need to check that the underlying system
clocksource is TSC or based on TSC but every test implements its own
check. As a first step towards unification, extract check_clocksource()
from kvm_clock_test and split it into two functions: arch-neutral
'sys_get_cur_clocksource()' and x86-specific 'sys_clocksource_is_tsc()'.
Fix a couple of pre-existing issues in kvm_clock_test: memory leakage in
check_clocksource() and using TEST_ASSERT() instead of TEST_REQUIRE().
The change also makes the test fail when system clocksource can't be read
from sysfs.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240109141121.1619463-2-vkuznets@redhat.com
[sean: eliminate if-elif pattern just to set a bool true]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Some scripts are not tests themselves; they contain utility functions used
by other tests. According to Documentation/dev-tools/kselftest.rst, such
files should be listed in TEST_FILES. Currently they are incorrectly listed
in TEST_PROGS_EXTENDED so rename the variable.
Fixes: c085dbfb1c ("selftests/net/forwarding: define libs as TEST_PROGS_EXTENDED")
Suggested-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20240131140848.360618-6-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some scripts are not tests themselves; they contain utility functions used
by other tests. According to Documentation/dev-tools/kselftest.rst, such
files should be listed in TEST_FILES. Move those utility scripts to
TEST_FILES.
Fixes: 1751eb42dd ("selftests: net: use TEST_PROGS_EXTENDED")
Fixes: 25ae948b44 ("selftests/net: add lib.sh")
Fixes: b99ac18411 ("kselftests/net: add missed setup_loopback.sh/setup_veth.sh to Makefile")
Fixes: f5173fe3e1 ("selftests: net: included needed helper in the install targets")
Suggested-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20240131140848.360618-5-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
setup_loopback.sh and net_helper.sh are meant to be sourced from other
scripts, not executed directly. Therefore, remove the executable bits from
those files' permissions.
This change is similar to commit 49078c1b80 ("selftests: forwarding:
Remove executable bits from lib.sh")
Fixes: 7d1575014a ("selftests/net: GRO coalesce test")
Fixes: 3bdd9fd29c ("selftests/net: synchronize udpgro tests' tx and rx connection")
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20240131140848.360618-4-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The purpose of the test_LAG_cleanup() function is to check that some
hardware addresses are removed from underlying devices after they have been
unenslaved. The test function simply checks that those addresses are not
present at the end. However, if the addresses were never added to begin
with due to some error in device setup, the test function currently passes.
This is a false positive since in that situation the test did not actually
exercise the intended functionality.
Add a check that the expected addresses are indeed present after device
setup. This makes the test function more robust.
I noticed this problem when running the team/dev_addr_lists.sh test on a
system without support for dummy and ipv6:
tools/testing/selftests/drivers/net/team# ./dev_addr_lists.sh
Error: Unknown device type.
Error: Unknown device type.
This program is not intended to be run as root.
RTNETLINK answers: Operation not supported
TEST: team cleanup mode lacp [ OK ]
Fixes: bbb774d921 ("net: Add tests for bonding and team address list management")
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20240131140848.360618-3-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to commit dd2d40acdb ("selftests: bonding: Add more missing
config options"), add more networking-specific config options which are
needed for team device tests.
For testing, I used the minimal config generated by virtme-ng and I added
the options in the config file. Afterwards, the team device test passed.
Fixes: bbb774d921 ("net: Add tests for bonding and team address list management")
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20240131140848.360618-2-bpoirier@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When running the pmtu.sh via the kselftest infra, accessing
/dev/stdout gives unexpected results:
# dd: failed to open '/dev/stdout': Device or resource busy
# TEST: IPv4, bridged vxlan4: PMTU exceptions [FAIL]
Let dd use directly the standard output to fix the above:
# TEST: IPv4, bridged vxlan4: PMTU exceptions - nexthop objects [ OK ]
Fixes: 136a1b434b ("selftests: net: test vxlan pmtu exceptions with tcp")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/23d7592c5d77d75cff9b34f15c227f92e911c2ae.1706635101.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The pmtu.sh test tries to detect the tunnel protocols available
in the running kernel and properly skip the unsupported cases.
In a few more complex setup, such detection is unsuccessful, as
the script currently ignores some intermediate error code at
setup time.
Before:
# which: no nettest in (/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin)
# TEST: vti6: PMTU exceptions (ESP-in-UDP) [FAIL]
# PMTU exception wasn't created after creating tunnel exceeding link layer MTU
# ./pmtu.sh: line 931: kill: (7543) - No such process
# ./pmtu.sh: line 931: kill: (7544) - No such process
After:
# xfrm4 not supported
# TEST: vti4: PMTU exceptions [SKIP]
Fixes: ece1278a9b ("selftests: net: add ESP-in-UDP PMTU test")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/cab10e75fda618e6fff8c595b632f47db58b9309.1706635101.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The mentioned test uses a few Kconfig still missing the
net config, add them.
Before:
# Error: Specified qdisc kind is unknown.
# Error: Specified qdisc kind is unknown.
# Error: Qdisc not classful.
# We have an error talking to the kernel
# Error: Qdisc not classful.
# We have an error talking to the kernel
# policy_routing not supported
# TEST: ICMPv4 with DSCP and ECN: PMTU exceptions [SKIP]
After:
# TEST: ICMPv4 with DSCP and ECN: PMTU exceptions [ OK ]
Fixes: ec730c3e1f ("selftest: net: Test IPv4 PMTU exceptions with DSCP and ECN")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/8d27bf6762a5c7b3acc457d6e6872c533040f9c1.1706635101.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the test is racy and seems to not pass anymore.
In order to rectify it, aim on TCP_TW_RST.
Doesn't seem way too good with this sleep() part, but it seems as
a reasonable compromise for the test. There is a plan in-line comment on
how-to improve it, going to do it on the top, at this moment I want it
to run on netdev/patchwork selftests dashboard.
It also slightly changes tcp_ao-lib in order to get SO_ERROR propagated
to test_client_verify() return value.
Fixes: c6df7b2361 ("selftests/net: Add TCP-AO RST test")
Signed-off-by: Dmitry Safonov <dima@arista.com>
Link: https://lore.kernel.org/r/20240130-tcp-ao-test-key-mgmt-v2-3-d190430a6c60@arista.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As the names of (struct test_key) members didn't reflect whether the key
was used for TX or RX, the verification for the counters was done
incorrectly for asymmetrical selftests.
Rename these with _tx appendix and fix checks in verify_counters().
While at it, as the checks are now correct, introduce skip_counters_checks,
which is intended for tests where it's expected that a key that was set
with setsockopt(sk, IPPROTO_TCP, TCP_AO_INFO, ...) might had no chance
of getting used on the wire.
Fixes the following failures, exposed by the previous commit:
> not ok 51 server: Check current != rnext keys set before connect(): Counter pkt_good was expected to increase 0 => 0 for key 132:5
> not ok 52 server: Check current != rnext keys set before connect(): Counter pkt_good was not expected to increase 0 => 21 for key 137:10
>
> not ok 63 server: Check current flapping back on peer's RnextKey request: Counter pkt_good was expected to increase 0 => 0 for key 132:5
> not ok 64 server: Check current flapping back on peer's RnextKey request: Counter pkt_good was not expected to increase 0 => 40 for key 137:10
Cc: Mohammad Nassiri <mnassiri@ciena.com>
Fixes: 3c3ead5556 ("selftests/net: Add TCP-AO key-management test")
Signed-off-by: Dmitry Safonov <dima@arista.com>
Link: https://lore.kernel.org/r/20240130-tcp-ao-test-key-mgmt-v2-2-d190430a6c60@arista.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The end_server() function only operates in the server thread
and always takes an accept socket instead of a listen socket as
its input argument. To align with this, invert the boolean values
used when calling verify_counters() within the end_server() function.
As a result of this typo, the test didn't correctly check for
the non-symmetrical scenario, where i.e. peer-A uses a key <100:200>
to send data, but peer-B uses another key <105:205> to send its data.
So, in simple words, different keys for TX and RX.
Fixes: 3c3ead5556 ("selftests/net: Add TCP-AO key-management test")
Signed-off-by: Mohammad Nassiri <mnassiri@ciena.com>
Link: https://lore.kernel.org/all/934627c5-eebb-4626-be23-cfb134c01d1a@arista.com/
[amended 'Fixes' tag, added the issue description and carried-over to lkml]
Signed-off-by: Dmitry Safonov <dima@arista.com>
Link: https://lore.kernel.org/r/20240130-tcp-ao-test-key-mgmt-v2-1-d190430a6c60@arista.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
l2_tos_ttl_inherit.sh verifies the inheritance of tos and ttl
for GRETAP, VXLAN and GENEVE.
Before testing it checks if the required module is available
and if not skips the tests accordingly.
Currently only GRETAP and VXLAN are tested because the GENEVE
module is missing.
Fixes: b690842d12 ("selftests/net: test l2 tunnel TOS/TTL inheriting")
Signed-off-by: Matthias May <matthias.may@westermo.com>
Link: https://lore.kernel.org/r/20240130101157.196006-1-matthias.may@westermo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
One of the test cases in the test_bridge_backup_port.sh selftest relies
on a matchall classifier to drop unrelated traffic so that the Tx drop
counter on the VXLAN device will only be incremented as a result of
traffic generated by the test.
However, the configuration option for the matchall classifier is
missing from the configuration file which might explain the failures we
see in the netdev CI [1].
Fix by adding CONFIG_NET_CLS_MATCHALL to the configuration file.
[1]
# Backup nexthop ID - invalid IDs
# -------------------------------
[...]
# TEST: Forwarding out of vx0 [ OK ]
# TEST: No forwarding using backup nexthop ID [ OK ]
# TEST: Tx drop increased [FAIL]
# TEST: IPv6 address family nexthop as backup nexthop [ OK ]
# TEST: No forwarding out of swp1 [ OK ]
# TEST: Forwarding out of vx0 [ OK ]
# TEST: No forwarding using backup nexthop ID [ OK ]
# TEST: Tx drop increased [FAIL]
[...]
Fixes: b408453053 ("selftests: net: Add bridge backup port and backup nexthop ID test")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240129123703.1857843-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
