Pull input updates from Dmitry Torokhov:
- a new driver for Adafruit Seesaw gamepad device
- Zforce touchscreen will handle standard device properties for axis
swap/inversion
- handling of advanced sensitivity settings in Microchip CAP11xx
capacitive sensor driver
- more drivers have been converted to use newer gpiod API
- support for dedicated wakeup IRQs in gpio-keys dirver
- support for slider gestures and OTP variants in iqs269a driver
- atkbd will report keyboard version as 0xab83 in cases when GET ID
command was skipped (to deal with problematic firmware on newer
laptops), restoring the previous behavior
- other assorted cleanups and changes
* tag 'input-for-v6.8-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (44 commits)
Input: atkbd - use ab83 as id when skipping the getid command
Input: driver for Adafruit Seesaw Gamepad
dt-bindings: input: bindings for Adafruit Seesaw Gamepad
Input: da9063_onkey - avoid explicitly setting input's parent
Input: da9063_onkey - avoid using OF-specific APIs
Input: iqs269a - add support for OTP variants
dt-bindings: input: iqs269a: Add bindings for OTP variants
Input: iqs269a - add support for slider gestures
dt-bindings: input: iqs269a: Add bindings for slider gestures
Input: gpio-keys - filter gpio_keys -EPROBE_DEFER error messages
Input: zforce_ts - accept standard touchscreen properties
dt-bindings: touchscreen: neonode,zforce: Use standard properties
dt-bindings: touchscreen: convert neonode,zforce to json-schema
dt-bindings: input: convert drv266x to json-schema
Input: da9063 - use dev_err_probe()
Input: da9063 - drop redundant prints in probe()
Input: da9063 - simplify obtaining OF match data
Input: as5011 - convert to GPIO descriptor
Input: omap-keypad - drop optional GPIO support
Input: tca6416-keypad - drop unused include
...
Touch controllers need some time after receiving reset command for the
firmware to finish re-initializing and be ready to respond to commands
from the host. The driver already had handling for the post-reset delay
for I2C and SPI transports, this change adds the handling to
SMBus-connected devices.
SMBus devices are peculiar because they implement legacy PS/2
compatibility mode, so reset is actually issued by psmouse driver on the
associated serio port, after which the control is passed to the RMI4
driver with SMBus companion device.
Note that originally the delay was added to psmouse driver in
92e24e0e57 ("Input: psmouse - add delay when deactivating for SMBus
mode"), but that resulted in an unwanted delay in "fast" reconnect
handler for the serio port, so it was decided to revert the patch and
have the delay being handled in the RMI4 driver, similar to the other
transports.
Tested-by: Jeffery Miller <jefferymiller@google.com>
Link: https://lore.kernel.org/r/ZR1yUFJ8a9Zt606N@penguin
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
SET_SYSTEM_SLEEP_PM_OPS() and SET_RUNTIME_PM_OPS() are deprecated
as they requires explicit protection against unused function warnings.
The new combination of pm_ptr() and SYSTEM_SLEEP_PM_OPS() /
RUNTIME_PM_OPS() allows the compiler to see the functions,
thus suppressing the warning, but still allowing the unused code to
be removed. Thus also drop the #ifdef guards.
Whilst all 3 sets of callbacks are similar, there are small differences
that make it challenging to use a single pm_dev_ops structure - hence
leave the duplication as it stands.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Andrew Duggan <aduggan@synaptics.com>
Link: https://lore.kernel.org/r/20230114171620.42891-6-jic23@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull input updates from Dmitry Torokhov:
- a new driver for the Azoteq IQS7222A/B/C capacitive touch controller
- a new driver for Raspberry Pi Sense HAT joystick
- sun4i-lradc-keys gained support of R329 and D1 variants, plus it can
be now used as a wakeup source
- pm8941-pwrkey can now properly handle PON GEN3 variants; the driver
also implements software debouncing and has a workaround for missing
key press events
- assorted driver fixes and cleanups
* tag 'input-for-v5.19-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (29 commits)
Input: stmfts - do not leave device disabled in stmfts_input_open
Input: gpio-keys - cancel delayed work only in case of GPIO
Input: cypress_ps2 - fix typo in comment
Input: vmmouse - disable vmmouse before entering suspend mode
dt-bindings: google,cros-ec-keyb: Fixup bad compatible match
Input: cros-ec-keyb - allow skipping keyboard registration
dt-bindings: google,cros-ec-keyb: Introduce switches only compatible
Input: psmouse-smbus - avoid flush_scheduled_work() usage
Input: bcm-keypad - remove unneeded NULL check before clk_disable_unprepare
Input: sparcspkr - fix refcount leak in bbc_beep_probe
Input: sun4i-lradc-keys - add support for R329 and D1
Input: sun4i-lradc-keys - add optional clock/reset support
dt-bindings: input: sun4i-lradc-keys: Add R329 and D1 compatibles
Input: sun4i-lradc-keys - add wakeup support
Input: pm8941-pwrkey - simulate missed key press events
Input: pm8941-pwrkey - add software key press debouncing support
Input: pm8941-pwrkey - add support for PON GEN3 base addresses
Input: pm8941-pwrkey - fix error message
Input: synaptics-rmi4 - remove unnecessary flush_workqueue()
Input: ep93xx_keypad - use devm_platform_ioremap_resource() helper
...
media Kconfig has two entries associated to V4L API:
VIDEO_DEV and VIDEO_V4L2.
On Kernel 2.6.x, there were two V4L APIs, each one with its own flag.
VIDEO_DEV were meant to:
1) enable Video4Linux and make its Kconfig options to appear;
2) it makes the Kernel build the V4L core.
while VIDEO_V4L2 where used to distinguish between drivers that
implement the newer API and drivers that implemented the former one.
With time, such meaning changed, specially after the removal of
all V4L version 1 drivers.
At the current implementation, VIDEO_DEV only does (1): it enables
the media options related to V4L, that now has:
menu "Video4Linux options"
visible if VIDEO_DEV
source "drivers/media/v4l2-core/Kconfig"
endmenu
but it doesn't affect anymore the V4L core drivers.
The rationale is that the V4L2 core has a "soft" dependency
at the I2C bus, and now requires to select a number of other
Kconfig options:
config VIDEO_V4L2
tristate
depends on (I2C || I2C=n) && VIDEO_DEV
select RATIONAL
select VIDEOBUF2_V4L2 if VIDEOBUF2_CORE
default (I2C || I2C=n) && VIDEO_DEV
In the past, merging them would be tricky, but it seems that it is now
possible to merge those symbols, in order to simplify V4L dependencies.
Let's keep VIDEO_DEV, as this one is used on some make *defconfig
configurations.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> # for meson-vdec & meson-ge2d
Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
Acked-by: Łukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In a recent change to the SPI subsystem [1], a new `delay` struct was added
to replace the `delay_usecs`. This change replaces the current
`delay_usecs` with `delay` for this driver.
The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure
that both `delay_usecs` & `delay` are used (in this order to preserve
backwards compatibility).
[1] commit bebcfd272d ("spi: introduce `delay` field for
`spi_transfer` + spi_transfer_delay_exec()")
Signed-off-by: Sergiu Cuciurean <sergiu.cuciurean@analog.com>
Link: https://lore.kernel.org/r/20200227130336.27042-1-sergiu.cuciurean@analog.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Fix a use-after-free noticed by running with KASAN enabled. If
rmi_irq_fn() is run twice in a row, then rmi_f11_attention() (among
others) will end up reading from drvdata->attn_data.data, which was
freed and left dangling in rmi_irq_fn().
Commit 55edde9fff ("Input: synaptics-rmi4 - prevent UAF reported by
KASAN") correctly identified and analyzed this bug. However the attempted
fix only NULLed out a local variable, missing the fact that
drvdata->attn_data is a struct, not a pointer.
NULL out the correct pointer in the driver data to prevent the attention
functions from copying from it.
Fixes: 55edde9fff ("Input: synaptics-rmi4 - prevent UAF reported by KASAN")
Fixes: b908d3cd81 ("Input: synaptics-rmi4 - allow to add attention data")
Signed-off-by: Evan Green <evgreen@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200427145537.1.Ic8f898e0147beeee2c005ee7b20f1aebdef1e7eb@changeid
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The previous patch "c5ccf2ad3d33 (Input: synaptics-rmi4 - switch to
reduced reporting mode)" enabled reduced reporting mode unintentionally
on some devices, if the firmware was configured with default Delta X/Y
threshold values. The result unintentionally degrade the performance of
some touchpads.
This patch checks to see that the driver is modifying the delta X/Y
thresholds before modifying the reporting mode.
Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Fixes: c5ccf2ad3d ("Input: synaptics-rmi4 - switch to reduced reporting mode")
Link: https://lore.kernel.org/r/20200312005549.29922-1-aduggan@synaptics.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The F54 Report Data is apparently read through a fifo and for
the smbus protocol that means that between reading a block of 32
bytes the rmiaddr shouldn't be incremented. However, changing
that causes other non-fifo reads to fail and so that change was
reverted.
This patch changes just the F54 function and it now reads 32 bytes
at a time from the fifo, using the F54_FIFO_OFFSET to update the
start address that is used when reading from the fifo.
This has only been tested with smbus, not with i2c or spi. But I
suspect that the same is needed there since I think similar
problems will occur there when reading more than 256 bytes.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Tested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: Timo Kaufmann <timokau@zoho.com>
Link: https://lore.kernel.org/r/20200115124819.3191024-3-hverkuil-cisco@xs4all.nl
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This increment of rmi_smbus in rmi_smb_read/write_block() causes
garbage to be read/written.
The first read of SMB_MAX_COUNT bytes is fine, but after that
it is nonsense. Trial-and-error showed that by dropping the
increment of rmiaddr everything is fine and the F54 function
properly works.
I tried a hack with rmi_smb_write_block() as well (writing to the
same F54 touchpad data area, then reading it back), and that
suggests that there too the rmiaddr increment has to be dropped.
It makes sense that if it has to be dropped for read, then it has
to be dropped for write as well.
It looks like the initial work with F54 was done using i2c, not smbus,
and it seems nobody ever tested F54 with smbus. The other functions
all read/write less than SMB_MAX_COUNT as far as I can tell, so this
issue was never noticed with non-F54 functions.
With this change I can read out the touchpad data correctly on my
Lenovo X1 Carbon 6th Gen laptop.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Link: https://lore.kernel.org/r/8dd22e21-4933-8e9c-a696-d281872c8de7@xs4all.nl
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
F34 is a bit special as it reinitializes the device and related driver
structs during the firmware update. This clears the fn_irq_mask which
will then prevent F34 from receiving further interrupts, leading to
timeouts during the firmware update. Make sure to reinitialize the
IRQ enables at the appropriate times.
The issue is in F34 code, but the commit in the fixes tag exposed the
issue, as before this commit things would work by accident.
Fixes: 363c53875a (Input: synaptics-rmi4 - avoid processing unknown IRQs)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://lore.kernel.org/r/20191129133514.23224-1-l.stach@pengutronix.de
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The v4l2-compliance utility reported several V4L2 API compliance
issues:
- the sequence counter wasn't filled in
- the sequence counter wasn't reset to 0 at the start of streaming
- the returned field value wasn't set to V4L2_FIELD_NONE
- the timestamp wasn't set
- the payload size was undefined if an error was returned
- min_buffers_needed doesn't need to be initialized
Fix these issues.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de
Link: https://lore.kernel.org/r/20191119105118.54285-3-hverkuil-cisco@xs4all.nl
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The body of the for loop is only ever run once as the second standard_report
element is never changed from its initial zero init, so the loop condition is
never satisfies after the first run. Equally the start member of the first
element is never changed from 0, so the index offset is always a constant 0.
Remove this needless obfuscation of the code and write it in a straight
forward manner.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://lore.kernel.org/r/20191104114454.10500-3-l.stach@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
