Move the bridge pre_enable call before crtc enable, and the bridge
post_disable call after the crtc disable.
The sequence of enable after this patch will look like:
bridge[n]_pre_enable
...
bridge[1]_pre_enable
crtc_enable
encoder_enable
bridge[1]_enable
...
bridge[n]_enable
And, the disable sequence for the display pipeline will look like:
bridge[n]_disable
...
bridge[1]_disable
encoder_disable
crtc_disable
bridge[1]_post_disable
...
bridge[n]_post_disable
The definition of bridge pre_enable hook says that,
"The display pipe (i.e. clocks and timing signals) feeding this bridge
will not yet be running when this callback is called".
Since CRTC is also a source feeding the bridge, it should not be enabled
before the bridges in the pipeline are pre_enabled. Fix that by
re-ordering the sequence of bridge pre_enable and bridge post_disable.
While at it, update the drm bridge API documentation as well.
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Tested-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Tested-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20250605171524.27222-4-aradhya.bhatia@linux.dev
Signed-off-by: Maxime Ripard <mripard@kernel.org>
[WHY]
1. Drivers using DRM_GEM_SHADOW_PLANE_HELPER_FUNCS and
DRM_GEM_SHMEM_DRIVER_OPS (e.g., udl, ast) do not require
sg_table import.
They only need dma_buf_vmap() to access the shared buffer's
kernel virtual address.
2. On certain Aspeed-based boards, a dma_mask of 0xffff_ffff may
trigger SWIOTLB during dmabuf import. However, IO_TLB_SEGSIZE
restricts the maximum DMA streaming mapping memory, resulting in
errors like:
ast 0000:07:00.0: swiotlb buffer is full (sz: 3145728 bytes), total 32768 (slots), used 0 (slots)
[HOW]
Provide a gem_prime_import implementation without sg_table mapping
to avoid issues (e.g., "swiotlb buffer is full"). Drivers that do not
require sg_table can adopt this.
Signed-off-by: Shixiong Ou <oushixiong@kylinos.cn>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250522070714.439824-1-oushixiong1025@163.com
Inline drm_gem_pin() into its only caller drm_gem_map_attach()
and update the documentation in the callback's purpose. Do the
equivalent for drm_gem_unpin(). Also add stricter error checking
on the involved locking.
The pin operation in the GEM object functions is a helper for
PRIME-exported buffer objects. Having drm_gem_pin() gives the
impression of a general-purpose interface, which is not the case.
Removing it makes the pin callback a bit harder to misuse.
v2:
- clarify comment on pin callback (Dmitry)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://lore.kernel.org/r/20250526132634.531789-5-tzimmermann@suse.de
Pull drm updates from Dave Airlie:
"As part of building up nova-core/nova-drm pieces we've brought in some
rust abstractions through this tree, aux bus being the main one, with
devres changes also in the driver-core tree. Along with the drm core
abstractions and enough nova-core/nova-drm to use them. This is still
all stub work under construction, to build the nova driver upstream.
The other big NVIDIA related one is nouveau adds support for
Hopper/Blackwell GPUs, this required a new GSP firmware update to
570.144, and a bunch of rework in order to support multiple fw
interfaces.
There is also the introduction of an asahi uapi header file as a
precursor to getting the real driver in later, but to unblock
userspace mesa packages while the driver is trapped behind rust
enablement.
Otherwise it's the usual mixture of stuff all over, amdgpu, i915/xe,
and msm being the main ones, and some changes to vsprintf.
new drivers:
- bring in the asahi uapi header standalone
- nova-drm: stub driver
rust dependencies (for nova-core):
- auxiliary
- bus abstractions
- driver registration
- sample driver
- devres changes from driver-core
- revocable changes
core:
- add Apple fourcc modifiers
- add virtio capset definitions
- extend EXPORT_SYNC_FILE for timeline syncobjs
- convert to devm_platform_ioremap_resource
- refactor shmem helper page pinning
- DP powerup/down link helpers
- extended %p4cc in vsprintf.c to support fourcc prints
- change vsprintf %p4cn to %p4chR, remove %p4cn
- Add drm_file_err function
- IN_FORMATS_ASYNC property
- move sitronix from tiny to their own subdir
rust:
- add drm core infrastructure rust abstractions
(device/driver, ioctl, file, gem)
dma-buf:
- adjust sg handling to not cache map on attach
- allow setting dma-device for import
- Add a helper to sort and deduplicate dma_fence arrays
docs:
- updated drm scheduler docs
- fbdev todo update
- fb rendering
- actual brightness
ttm:
- fix delayed destroy resv object
bridge:
- add kunit tests
- convert tc358775 to atomic
- convert drivers to devm_drm_bridge_alloc
- convert rk3066_hdmi to bridge driver
scheduler:
- add kunit tests
panel:
- refcount panels to improve lifetime handling
- Powertip PH128800T004-ZZA01
- NLT NL13676BC25-03F, Tianma TM070JDHG34-00
- Himax HX8279/HX8279-D DDIC
- Visionox G2647FB105
- Sitronix ST7571
- ZOTAC rotation quirk
vkms:
- allow attaching more displays
i915:
- xe3lpd display updates
- vrr refactor
- intel_display struct conversions
- xe2hpd memory type identification
- add link rate/count to i915_display_info
- cleanup VGA plane handling
- refactor HDCP GSC
- fix SLPC wait boosting reference counting
- add 20ms delay to engine reset
- fix fence release on early probe errors
xe:
- SRIOV updates
- BMG PCI ID update
- support separate firmware for each GT
- SVM fix, prelim SVM multi-device work
- export fan speed
- temp disable d3cold on BMG
- backup VRAM in PM notifier instead of suspend/freeze
- update xe_ttm_access_memory to use GPU for non-visible access
- fix guc_info debugfs for VFs
- use copy_from_user instead of __copy_from_user
- append PCIe gen5 limitations to xe_firmware document
amdgpu:
- DSC cleanup
- DC Scaling updates
- Fused I2C-over-AUX updates
- DMUB updates
- Use drm_file_err in amdgpu
- Enforce isolation updates
- Use new dma_fence helpers
- USERQ fixes
- Documentation updates
- SR-IOV updates
- RAS updates
- PSP 12 cleanups
- GC 9.5 updates
- SMU 13.x updates
- VCN / JPEG SR-IOV updates
amdkfd:
- Update error messages for SDMA
- Userptr updates
- XNACK fixes
radeon:
- CIK doorbell cleanup
nouveau:
- add support for NVIDIA r570 GSP firmware
- enable Hopper/Blackwell support
nova-core:
- fix task list
- register definition infrastructure
- move firmware into own rust module
- register auxiliary device for nova-drm
nova-drm:
- initial driver skeleton
msm:
- GPU:
- ACD (adaptive clock distribution) for X1-85
- drop fictional address_space_size
- improve GMU HFI response time out robustness
- fix crash when throttling during boot
- DPU:
- use single CTL path for flushing on DPU 5.x+
- improve SSPP allocation code for better sharing
- Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550
- Added SAR2130P support
- Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660
- DP:
- switch to new audio helpers
- better LTTPR handling
- DSI:
- Added support for SA8775P
- Added SAR2130P support
- HDMI:
- Switched to use new helpers for ACR data
- Fixed old standing issue of HPD not working in some cases
amdxdna:
- add dma-buf support
- allow empty command submits
renesas:
- add dma-buf support
- add zpos, alpha, blend support
panthor:
- fail properly for NO_MMAP bos
- add SET_LABEL ioctl
- debugfs BO dumping support
imagination:
- update DT bindings
- support TI AM68 GPU
hibmc:
- improve interrupt handling and HPD support
virtio:
- add panic handler support
rockchip:
- add RK3588 support
- add DP AUX bus panel support
ivpu:
- add heartbeat based hangcheck
mediatek:
- prepares support for MT8195/99 HDMIv2/DDCv2
anx7625:
- improve HPD
tegra:
- speed up firmware loading
* tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel: (1627 commits)
drm/nouveau/tegra: Fix error pointer vs NULL return in nvkm_device_tegra_resource_addr()
drm/xe: Default auto_link_downgrade status to false
drm/xe/guc: Make creation of SLPC debugfs files conditional
drm/i915/display: Add check for alloc_ordered_workqueue() and alloc_workqueue()
drm/i915/dp_mst: Work around Thunderbolt sink disconnect after SINK_COUNT_ESI read
drm/i915/ptl: Use everywhere the correct DDI port clock select mask
drm/nouveau/kms: add support for GB20x
drm/dp: add option to disable zero sized address only transactions.
drm/nouveau: add support for GB20x
drm/nouveau/gsp: add hal for fifo.chan.doorbell_handle
drm/nouveau: add support for GB10x
drm/nouveau/gf100-: track chan progress with non-WFI semaphore release
drm/nouveau/nv50-: separate CHANNEL_GPFIFO handling out from CHANNEL_DMA
drm/nouveau: add helper functions for allocating pinned/cpu-mapped bos
drm/nouveau: add support for GH100
drm/nouveau: improve handling of 64-bit BARs
drm/nouveau/gv100-: switch to volta semaphore methods
drm/nouveau/gsp: support deeper page tables in COPY_SERVER_RESERVED_PDES
drm/nouveau/gsp: init client VMMs with NV0080_CTRL_DMA_SET_PAGE_DIRECTORY
drm/nouveau/gsp: fetch level shift and PDE from BAR2 VMM
...
This will be used in a later commit to trace the drm client_id in
some of the gpu_scheduler trace events.
This requires changing all the users of drm_sched_job_init to
add an extra parameter.
The newly added drm_client_id field in the drm_sched_fence is a bit
of a duplicate of the owner one. One suggestion I received was to
merge those 2 fields - this can't be done right now as amdgpu uses
some special values (AMDGPU_FENCE_OWNER_*) that can't really be
translated into a client id. Christian is working on getting rid of
those; when it's done we should be able to squash owner/drm_client_id
together.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250526125505.2360-3-pierre-eric.pelloux-prayer@amd.com
Pull documentation updates from Jonathan Corbet:
"A moderately busy cycle for documentation this time around:
- The most significant change is the replacement of the old
kernel-doc script (a monstrous collection of Perl regexes that
predates the Git era) with a Python reimplementation. That, too, is
a horrifying collection of regexes, but in a much cleaner and more
maintainable structure that integrates far better with the Sphinx
build system.
This change has been in linux-next for the full 6.15 cycle; the
small number of problems that turned up have been addressed,
seemingly to everybody's satisfaction. The Perl kernel-doc script
remains in tree (as scripts/kernel-doc.pl) and can be used with a
command-line option if need be. Unless some reason to keep it
around materializes, it will probably go away in 6.17.
Credit goes to Mauro Carvalho Chehab for doing all this work.
- Some RTLA documentation updates
- A handful of Chinese translations
- The usual collection of typo fixes, general updates, etc"
* tag 'docs-6.16' of git://git.lwn.net/linux: (85 commits)
Docs: doc-guide: update sphinx.rst Sphinx version number
docs: doc-guide: clarify latest theme usage
Documentation/scheduler: Fix typo in sched-stats domain field description
scripts: kernel-doc: prevent a KeyError when checking output
docs: kerneldoc.py: simplify exception handling logic
MAINTAINERS: update linux-doc entry to cover new Python scripts
docs: align with scripts/syscall.tbl migration
Documentation: NTB: Fix typo
Documentation: ioctl-number: Update table intro
docs: conf.py: drop backward support for old Sphinx versions
Docs: driver-api/basics: add kobject_event interfaces
Docs: relay: editing cleanups
docs: fix "incase" typo in coresight/panic.rst
Fix spelling error for 'parallel'
docs: admin-guide: fix typos in reporting-issues.rst
docs: dmaengine: add explanation for DMA_ASYNC_TX capability
Documentation: leds: improve readibility of multicolor doc
docs: fix typo in firmware-related section
docs: Makefile: Inherit PYTHONPYCACHEPREFIX setting as env variable
Documentation: ioctl-number: Update outdated submission info
...
Provide helpers that program hardware gamma LUTs. Tha gamma ramp is
either provided by the driver or generated by the helper.
The DRM driver exports the GAMMA_LUT property with a fixed number of
entries per color component, such as 256 on 8-bit-wide components. The
entries describe the gamma ramp of each individual component. The new
helper drm_crtc_load_gamma_888() loads such gamma ramp to hardware. The
hardware uses each displayed pixel's individial components as indices
into the hardware gamma table.
For color modes with less than 8 bits per color component, the helpers
drm_crtc_load_gamma_565_from() and drm_crtc_load_gamma_555_from_888()
interpolate the provided gamma ramp to reduce it to the correct number
of entries; 5/6/5 for RGB565-like formats and 5/5/5 for XRGB1555-like
formats.
If no gamma ramp has been provided, drivers can use the new helper
drm_crtc_fill_gamma_888() to load a default gamma ramp with 256 entries
per color component. For color modes with less bits, the new helpers
drm_crtc_fill_gamma_565() and drm_crtc_fill_gamma_555() are available.
The default gamma ramp uses a gamma factor of 1.
For color modes with palette, drm_crtc_load_palette_8() load an 8-bit
palette into the hardware. If no palette has been specified,
drm_crtc_fill_palette_8() load a system-specific default palette. This
is currently only a grey-scale palette with increasing luminance, but
later patches can change this. For PCs, a VGA default palette could
be used.
v2:
- drop comment on gamma factor of 2.2 (Michel, Pekka)
- fix typos in commit description (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250520094203.30545-2-tzimmermann@suse.de
Bridges obtained via devm_drm_bridge_alloc(dev, ...) will be put when the
requesting device (@dev) is removed.
However drivers which obtained them may need to put the obtained reference
explicitly. One such case is if they bind the devm removal action to a
different device than the one implemented by the driver itself and which
might be removed at a different time, such as bridge/panel.c.
Add devm_drm_put_bridge() to manually release a devm-obtained bridge in
such cases.
This function is considered only a temporary workaround until the panel
bridge is reworked and should be removed afterwards.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250509-drm-bridge-convert-to-alloc-api-v3-20-b8bc1f16d7aa@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Add generic CEC helpers to be used by HDMI drivers. Both notifier and
and adapter are supported for registration. Once registered, the driver
can call common set of functions to update physical address, to
invalidate it or to unregister CEC data. Unlike drm_connector_cec_funcs
(which provides interface common to all implementations, including, but
not limited to the CEC adapter, CEC notifier, CEC pin-based adapter,
etc) the struct drm_connector_hdmi_cec_adapter_ops provides callbacks
specific to the CEC adapter implementations.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250517-drm-hdmi-connector-cec-v6-5-35651db6f19b@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
As a preparation to adding HDMI CEC helper code, add CEC-related fields
to the struct drm_connector. The callbacks abstract CEC infrastructure
in order to support CEC adapters and CEC notifiers in a universal way.
CEC data is a void pointer as it allows us to make CEC data
helper-specific. For example, currently it will be either cec_notifier
or cec_adapter + drm_connector_hdmi_cec_funcs. Later cec-pin might store
platform callbacks here. DP CEC might need to store AUX pointer, etc.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20250517-drm-hdmi-connector-cec-v6-3-35651db6f19b@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Some older NVIDIA and some newer NVIDIA hardware/firmware seems to
have issues with address only transactions (firmware rejects them).
Add an option to the core drm dp to avoid address only transactions,
This just puts the MOT flag removal on the last message of the transfer
and avoids the start of transfer transaction.
This with the flag set in nouveau, allows eDP probing on GB203 device.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Ben Skeggs <bskeggs@nvidia.com>
Reviewed-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
drm-misc-next for v6.16-rc1:
Once more, with async flips.
UAPI Changes:
- Add IN_FORMATS_ASYNC property, use in i915.
Cross-subsystem Changes:
- Remove some unused debug code in dma-buf.
Core Changes:
Driver Changes:
- Add Novatek NT37801 panel.
- Allow submitting empty commands in amdxdna.
- Convert cirrus to use managed request_all_regions.
- Move Sitronix from tiny to their own place.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/23ded62c-6a62-4195-9c08-4dfb81eafd72@linux.intel.com
Mixing GPU and CPU atomics does not work unless a strict migration
policy of GPU atomics must be device memory. Enforce a policy of must be
in VRAM with a retry loop of 3 attempts, if retry loop fails abort
fault.
Removing always_migrate_to_vram modparam as we now have real migration
policy.
v2:
- Only retry migration on atomics
- Drop alway migrate modparam
v3:
- Only set vram_only on DGFX (Himal)
- Bail on get_pages failure if vram_only and retry count exceeded (Himal)
- s/vram_only/devmem_only
- Update xe_svm_range_is_valid to accept devmem_only argument
v4:
- Fix logic bug get_pages failure
v5:
- Fix commit message (Himal)
- Mention removing always_migrate_to_vram in commit message (Lucas)
- Fix xe_svm_range_is_valid to check for devmem pages
- Bail on devmem_only && !migrate_devmem (Thomas)
v6:
- Add READ_ONCE barriers for opportunistic checks (Thomas)
- Pair READ_ONCE with WRITE_ONCE (Thomas)
v7:
- Adjust comments (Thomas)
Fixes: 2f118c9491 ("drm/xe: Add SVM VRAM migration")
Cc: stable@vger.kernel.org
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/20250512135500.1405019-3-matthew.brost@intel.com
(cherry picked from commit a9ac0fa455)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Non-display related:
- Fix undefined reference to `intel_pxp_gsccs_is_ready_for_sessions'
Display related:
- More work towards display separation (Jani)
- Stop writing VRR_CTL_IGN_MAX_SHIFT for MTL onwards (Jouni)
- DSC checks for 3 engines (Ankit)
- Add link rate and lane count to i915_display_info (Khaled)
- PSR fixes and workaround for underrun on idle (Jouni)
- LOBF enablement and ALMP fixes (Animesh)
- Clean up VGA plane handling (Ville)
- Use an intel_connector pointer everywhere (Imre)
- Fix warning for coffeelake on SunrisePoint PCH (Jiajia)
- Rework/Correction on minimum hblank calculation (Arun)
- Dmesg clean up (Jani)
- Add a couple of simple display workarounds (Ankit, Vinod)
- Refactor HDCP GSC (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/aByyL3bEufPu79OM@intel.com
There exists a property IN_FORMATS which exposes the plane supported
modifiers/formats to the user. In some platforms when asynchronous flip
are used all of modifiers/formats mentioned in IN_FORMATS are not
supported. This patch adds a new plane property IN_FORMATS_ASYNC to
expose the async flip supported modifiers/formats so that user can use
this information ahead and do flip with unsupported
formats/modifiers. This will save flip failures.
Add a new function pointer similar to format_mod_supported specifically
for asynchronous flip.
v2: Remove async variable from drm_plane (Ville)
v3: Add new function pointer for async (Ville)
v5: Typo corrected in commit message & some correction in the kernel
documentation. (Chaitanya)
v7: Place IN_FORMATS_ASYNC next to IN_FORMATS (Ville)
v8: replace uint32_t with u32 and uint64_t with u64 (Chaitanya)
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Acked-by: Xaver Hugl <xaver.hugl@kde.org>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Naveen Kumar <naveen1.kumar@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250407-asyn-v13-1-b93ef83076c5@intel.com
Add a drm helper function which appends the process information for
the drm_file over drm_err formatted output.
v5: change to macro from function (Christian Koenig)
add helper functions for lock/unlock (Christian Koenig)
v6: remove __maybe_unused and make function inline (Jani Nikula)
remove drm_print.h
v7: Use va_format and %pV to concatenate fmt and vargs (Jani Nikula)
v8: Code formatting and typos (Ursulin tvrtko)
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
drm-misc-next for v6.16-rc1:
UAPI Changes:
- panthor now fails in mmap_offset call for a BO created with
DRM_PANTHOR_BO_NO_MMAP.
- Add DRM_PANTHOR_BO_SET_LABEL ioctl and label panthor kernel BOs.
Cross-subsystem Changes:
- Add kmap_local_page_try_from_panic for drm/panic.
- Add DT bindings for panels.
- Update DT bindings for imagination.
- Extend %p4cc in lib/vsprintf.c to support fourcc printing.
Core Changes:
- Remove the disgusting turds.
- Register definition updates for DP.
- DisplayID timing blocks refactor.
- Remove now unused mipi_dsi_dsc_write_seq.
- Convert panel drivers to not return error in prepare/enable and
unprepare/disable calls.
Driver Changes:
- Assorted small fixes and featuers for rockchip, panthor, accel/ivpu,
accel/amdxdna, hisilicon/hibmc, i915/backlight, sysfb, accel/qaic,
udl, etnaviv, virtio, xlnx, panel/boe-bf060y8m-aj0, bridge/synopsis,
panthor, panel/samsung/sofef00m, lontium/lt9611uxc, nouveau, panel/himax-hx8279,
panfrost, st7571-i2c.
- Improve hibmc interrupt handling and add HPD support.
- Add NLT NL13676BC25-03F, Tianma TM070JDHG34-00, Himax HX8279/HX8279-D
DDIC, Visionox G2647FB105, Sitronix ST7571 LCD Controller, panels.
- Add zpos, alpha and blend to renesas.
- Convert drivers to use drm_gem_is_imported, replacing gem->import_attach.
- Support TI AM68 GPU in imagination.
- Support panic handler in virtio.
- Add support to get the panel from DP AUX bus in rockchip and add
RK3588 support.
- Make sofef00 only support the sofef00 panel, not another unrelated
one.
- Add debugfs BO dumping support to panthor, and print associated labels.
- Implement heartbeat based hangcheck in ivpu.
- Mass convert drivers to devm_drm_bridge_alloc api.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/e2a958d9-e506-4962-8bae-0dbf2ecc000f@linux.intel.com
Unify the function to calculate the link symbol cycles for both dsc and
non-dsc case and export the function so that it can be used in the
respective platform display drivers for other calculations.
v2: unify the fn for both dsc and non-dsc case (Imre)
v3: rename drm_dp_link_symbol_cycles to drm_dp_link_data_symbol_cycles
retain slice_eoc_cycles as is (Imre)
v4: Expose only drm_dp_link_symbol_cycles() (Imre)
v6: Add slice pixels which was removed unknowingly (Vinod)
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250424-hblank-v7-1-8b002f1506cc@intel.com
In the Rust DRM device abstraction we need to allocate a struct
drm_device.
Currently, there are two options, the deprecated drm_dev_alloc() (which
does not support subclassing) and devm_drm_dev_alloc(). The latter
supports subclassing, but also manages the initial reference through
devres for the parent device.
In Rust we want to conform with the subclassing pattern, but do not want
to get the initial reference managed for us, since Rust has its own,
idiomatic ways to properly deal with it.
There are two options to achieve this.
1) Allocate the memory ourselves with a KBox.
2) Implement __drm_dev_alloc(), which supports subclassing, but is
unmanged.
While (1) would be possible, it would be cumbersome, since it would
require exporting drm_dev_init() and drmm_add_final_kfree().
Hence, go with option (2) and implement __drm_dev_alloc().
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20250410235546.43736-2-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
This flag used to be used in the old memory tracking code, that
code got migrated into the vmwgfx driver[1], and then got removed
from the tree[2], but this piece got left behind.
[1] f07069da6b ("drm/ttm: move memory accounting into vmwgfx v4")
[2] 8aadeb8ad8 ("drm/vmwgfx: Remove the dedicated memory accounting")
Cleanup the dead code.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Short summary of fixes pull:
dma-buf:
- Correctly decrement refcounter on errors
gem:
- Fix test for imported buffers
ivpu:
- Fix debugging
- Fixes to frequency
- Support firmware API 3.28.3
- Flush jobs upon reset
mgag200:
- Set vblank start to correct values
v3d:
- Fix Indirect Dispatch
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250417084043.GA365738@linux.fritz.box
