Pull in-kernel read and write op cleanups from Christoph Hellwig:
"Cleanup in-kernel read and write operations
Reshuffle the (__)kernel_read and (__)kernel_write helpers, and ensure
all users of in-kernel file I/O use them if they don't use iov_iter
based methods already.
The new WARN_ONs in combination with syzcaller already found a missing
input validation in 9p. The fix should be on your way through the
maintainer ASAP".
[ This is prep-work for the real changes coming 5.9 ]
* tag 'cleanup-kernel_read_write' of git://git.infradead.org/users/hch/misc:
fs: remove __vfs_read
fs: implement kernel_read using __kernel_read
integrity/ima: switch to using __kernel_read
fs: add a __kernel_read helper
fs: remove __vfs_write
fs: implement kernel_write using __kernel_write
fs: check FMODE_WRITE in __kernel_write
fs: unexport __kernel_write
bpfilter: switch to kernel_write
autofs: switch to kernel_write
cachefiles: switch to kernel_write
Pull dma-mapping fixes from Christoph Hellwig:
- add a warning when the atomic pool is depleted (David Rientjes)
- protect the parameters of the new scatterlist helper macros (Marek
Szyprowski )
* tag 'dma-mapping-5.8-5' of git://git.infradead.org/users/hch/dma-mapping:
scatterlist: protect parameters of the sg_table related macros
dma-mapping: warn when coherent pool is depleted
Pull pin control fixes from Linus Walleij:
- Fix an issue in the AMD driver for the UART0 group
- Fix a glitch issue in the Baytrail pin controller
* tag 'pinctrl-v5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: baytrail: Fix pin being driven low for a while on gpiod_get(..., GPIOD_OUT_HIGH)
pinctrl: amd: fix npins for uart0 in kerncz_groups
Pull GPIO fixes from Linus Walleij:
"Some GPIO fixes, most of them for the PCA953x that Andy worked hard to
fix up.
- Fix two runtime PM errorpath problems in the Arizona GPIO driver.
- Fix three interrupt issues in the PCA953x driver.
- Fix the automatic address increment handling in the PCA953x driver
again.
- Add a quirk to the PCA953x that fixes a problem in the Intel
Galileo Gen 2"
* tag 'gpio-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: pca953x: Fix GPIO resource leak on Intel Galileo Gen 2
gpio: pca953x: disable regmap locking for automatic address incrementing
gpio: pca953x: Fix direction setting when configure an IRQ
gpio: pca953x: Override IRQ for one of the expanders on Galileo Gen 2
gpio: pca953x: Synchronize interrupt handler properly
gpio: arizona: put pm_runtime in case of failure
gpio: arizona: handle pm_runtime_get_sync failure case
Pull gfs2 fixes from Andreas Gruenbacher:
"Fix gfs2 readahead deadlocks by adding a IOCB_NOIO flag that allows
gfs2 to use the generic fiel read iterator functions without having to
worry about being called back while holding locks".
* tag 'gfs2-v5.8-rc4.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Rework read and page fault locking
fs: Add IOCB_NOIO flag for generic_file_read_iter
Pull arm64 fixes from Will Deacon:
"An unfortunately large collection of arm64 fixes for -rc5.
Some of this is absolutely trivial, but the alternatives, vDSO and CPU
errata workaround fixes are significant. At least people are finding
and fixing these things, I suppose.
- Fix workaround for CPU erratum #1418040 to disable the compat vDSO
- Fix Oops when single-stepping with KGDB
- Fix memory attributes for hypervisor device mappings at EL2
- Fix memory leak in PSCI and remove useless variable assignment
- Fix up some comments and asm labels in our entry code
- Fix broken register table formatting in our generated html docs
- Fix missing NULL sentinel in CPU errata workaround list
- Fix patching of branches in alternative instruction sections"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/alternatives: don't patch up internal branches
arm64: Add missing sentinel to erratum_1463225
arm64: Documentation: Fix broken table in generated HTML
arm64: kgdb: Fix single-step exception handling oops
arm64: entry: Tidy up block comments and label numbers
arm64: Rework ARM_ERRATUM_1414080 handling
arm64: arch_timer: Disable the compat vdso for cores affected by ARM64_WORKAROUND_1418040
arm64: arch_timer: Allow an workaround descriptor to disable compat vdso
arm64: Introduce a way to disable the 32bit vdso
arm64: entry: Fix the typo in the comment of el1_dbg()
drivers/firmware/psci: Assign @err directly in hotplug_tests()
drivers/firmware/psci: Fix memory leakage in alloc_init_cpu_groups()
KVM: arm64: Fix definition of PAGE_HYP_DEVICE
Pull s390 fixes from Heiko Carstens:
"This is mainly due to the fact that Gerald Schaefer's and also my old
email addresses currently do not work any longer. Therefore we decided
to switch to new email addresses and reflect that in the MAINTAINERS
file.
- Update email addresses in MAINTAINERS file and add .mailmap entries
for Gerald Schaefer and Heiko Carstens.
- Fix huge pte soft dirty copying"
* tag 's390-5.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
MAINTAINERS: update email address for Gerald Schaefer
MAINTAINERS: update email address for Heiko Carstens
s390/mm: fix huge pte soft dirty copying
Pull vkm fixes from Paolo Bonzini:
"Two simple but important bugfixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: MIPS: Fix build errors for 32bit kernel
KVM: nVMX: fixes for preemption timer migration
Pull MMC fixes from Ulf Hansson:
- Override DLL_CONFIG only with valid values in sdhci-msm
- Get rid of of_match_ptr() macro to fix warning in owl-mmc
- Limit segments to 1 to fix meson-gx G12A/G12B SoCs
* tag 'mmc-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-msm: Override DLL_CONFIG only if the valid value is supplied
mmc: owl-mmc: Get rid of of_match_ptr() macro
mmc: meson-gx: limit segments to 1 when dram-access-quirk is needed
We currently account the memory after the exit work has been run, but
that leaves a gap where a process has closed its ring and until the
memory has been accounted as freed. If the memlocked ulimit is
borderline, then that can introduce spurious setup errors returning
-ENOMEM because the free work hasn't been run yet.
Account this as freed when we close the ring, as not to expose a tiny
gap where setting up a new ring can fail.
Fixes: 85faa7b834 ("io_uring: punt final io_ring_ctx wait-and-free to workqueue")
Cc: stable@vger.kernel.org # v5.7
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit dc6d95b153 ("KVM: MIPS: Add more MMIO load/store
instructions emulation") introduced some 64bit load/store instructions
emulation which are unavailable on 32bit platform, and it causes build
errors:
arch/mips/kvm/emulate.c: In function 'kvm_mips_emulate_store':
arch/mips/kvm/emulate.c:1734:6: error: right shift count >= width of type [-Werror]
((vcpu->arch.gprs[rt] >> 56) & 0xff);
^
arch/mips/kvm/emulate.c:1738:6: error: right shift count >= width of type [-Werror]
((vcpu->arch.gprs[rt] >> 48) & 0xffff);
^
arch/mips/kvm/emulate.c:1742:6: error: right shift count >= width of type [-Werror]
((vcpu->arch.gprs[rt] >> 40) & 0xffffff);
^
arch/mips/kvm/emulate.c:1746:6: error: right shift count >= width of type [-Werror]
((vcpu->arch.gprs[rt] >> 32) & 0xffffffff);
^
arch/mips/kvm/emulate.c:1796:6: error: left shift count >= width of type [-Werror]
(vcpu->arch.gprs[rt] << 32);
^
arch/mips/kvm/emulate.c:1800:6: error: left shift count >= width of type [-Werror]
(vcpu->arch.gprs[rt] << 40);
^
arch/mips/kvm/emulate.c:1804:6: error: left shift count >= width of type [-Werror]
(vcpu->arch.gprs[rt] << 48);
^
arch/mips/kvm/emulate.c:1808:6: error: left shift count >= width of type [-Werror]
(vcpu->arch.gprs[rt] << 56);
^
cc1: all warnings being treated as errors
make[3]: *** [arch/mips/kvm/emulate.o] Error 1
So, use #if defined(CONFIG_64BIT) && defined(CONFIG_KVM_MIPS_VZ) to
guard the 64bit load/store instructions emulation.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: dc6d95b153 ("KVM: MIPS: Add more MMIO load/store instructions emulation")
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Message-Id: <1594365797-536-1-git-send-email-chenhc@lemote.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 850448f35a ("KVM: nVMX: Fix VMX preemption timer migration",
2020-06-01) accidentally broke nVMX live migration from older version
by changing the userspace ABI. Restore it and, while at it, ensure
that vmx->nested.has_preemption_timer_deadline is always initialized
according to the KVM_STATE_VMX_PREEMPTION_TIMER_DEADLINE flag.
Cc: Makarand Sonare <makarandsonare@google.com>
Fixes: 850448f35a ("KVM: nVMX: Fix VMX preemption timer migration")
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The constant arrays in gdb_xml.h are only used in arch/riscv/kernel/kgdb.c,
but other c files may include the gdb_xml.h indirectly via including the
kgdb.h. Hence, It will cause many unused-const-variable warnings. This
patch makes the kgdb.h not to include the gdb_xml.h to solve this problem.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Currently, only riscv kgdb.c uses the kgdb_has_hit_break() to identify
the kgdb breakpoint. It causes other architectures will encounter the "no
previous prototype" warnings if the compile option has W=1. Moving the
declaration of extern kgdb_has_hit_break() from risc-v kgdb.h to generic
kgdb.h to avoid generating these warnings.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Some functions are only used in the kgdb.c file. Add static properities
to these functions to avoid "no previous prototype" compile warnings
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Due to lack of hardware breakpoint support, the kernel option
CONFIG_STRICT_KERNEL_RWX should be disabled when using KGDB. However,
CONFIG_STRICT_KERNEL_RWX is always enabled now. Therefore, select
ARCH_OPTIONAL_KERNEL_RWX_DEFAULT to enable CONFIG_STRICT_KERNEL_RWX
by default, and then select ARCH_OPTIONAL_KERNEL_RWX to enable the
Kconfig prompt of CONFIG_STRICT_KERNEL_RWX so that users can turn it off.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The XML packet could be supported by required architecture if the
architecture defines CONFIG_HAVE_ARCH_KGDB_QXFER_PKT and implement its own
kgdb_arch_handle_qxfer_pkt(). Except for the kgdb_arch_handle_qxfer_pkt(),
the architecture also needs to record the feature supported by gdb stub
into the kgdb_arch_gdb_stub_feature, and these features will be reported
to host gdb when gdb stub receives the qSupported packet.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Acked-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
On ILP32, 64-bit result was shifted by value calculated for 32-bit long type
and returned value was much outside hashmap capacity.
As advised by Andrii Nakryiko, this patch uses different hashing variant for
architectures with size_t shorter than long long.
Fixes: e3b9242240 ("libbpf: add resizable non-thread safe internal hashmap")
Signed-off-by: Jakub Bogusz <qboosh@pld-linux.org>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200709225723.1069937-1-andriin@fb.com
CT entries are deleted via a workqueue from netfilter. If removing the
module before that, the rules are cleaned by the driver itself, but the
memory entries for them are not freed. Fix that.
Fixes: ac991b48d4 ("net/mlx5e: CT: Offload established flows")
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Device unit for port buffers size, xoff_threshold and xon_threshold is
cells. Fix a bug in driver where cell unit size was hard-coded to
128 bytes. This hard-coded value is buggy, as it is wrong for some hardware
versions.
Driver to read cell size from SBCAM register and translate bytes to cell
units accordingly.
In order to fix the bug, this patch exposes SBCAM (Shared buffer
capabilities mask) layout and defines.
If SBCAM.cap_cell_size is valid, use it for all bytes to cells
calculations. If not valid, fallback to 128.
Cell size do not change on the fly per device. Instead of issuing SBCAM
access reg command every time such translation is needed, cache it in
mlx5e_dcbx as part of mlx5e_dcbnl_initialize(). Pass dcbx.port_buff_cell_sz
as a param to every function that needs bytes to cells translation.
While fixing the bug, move MLX5E_BUFFER_CELL_SHIFT macro to
en_dcbnl.c, as it is only used by that file.
Fixes: 0696d60853 ("net/mlx5e: Receive buffer configuration")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Huy Nguyen <huyn@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Some released FW versions mistakenly don't set the capability that 50G
per lane link-modes are supported for VFs (ptys_extended_ethernet
capability bit). When the capability is unset, read
PTYS.ext_eth_proto_capability (always reliable).
If PTYS.ext_eth_proto_capability is valid (has a non-zero value)
conclude that the HCA supports 50G per lane. Otherwise, conclude that
the HCA doesn't support 50G per lane.
Fixes: a08b4ed137 ("net/mlx5: Add support to ext_* fields introduced in Port Type and Speed register")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
When detaching netdev, remove vxlan port configuration using
udp_tunnel_drop_rx_info. During function reload, configuration will be
restored using udp_tunnel_get_rx_info. This ensures sync between
firmware and driver. Use udp_tunnel_get_rx_info even if its physical
interface is down.
Fixes: 4383cfcc65 ("net/mlx5: Add devlink reload")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
In mlx5e_configure_flower() flow pointer is protected by rcu read lock.
However, after cited commit the pointer is being used outside of rcu read
block. Extend the block to protect all pointer accesses.
Fixes: 553f932838 ("net/mlx5e: Support tc block sharing for representors")
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Fix eeprom SFP query support by setting i2c_addr, offset and page number
correctly. Unlike QSFP modules, SFP eeprom params are as follow:
- i2c_addr is 0x50 for offset 0 - 255 and 0x51 for offset 256 - 511.
- Page number is always zero.
- Page offset is always relative to zero.
As part of eeprom query, query the module ID (SFP / QSFP*) via helper
function to set the params accordingly.
In addition, change mlx5_qsfp_eeprom_page() input type to be u16 to avoid
unnecessary casting.
Fixes: a708fb7b1f ("net/mlx5e: ethtool, Add support for EEPROM high pages query")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Pull drm fixes from Dave Airlie:
"I've been off most of the week, but some fixes have piled up. Seems a
bit busier than last week, but they are pretty spread out across a
bunch of drivers, none of them seem that big or worried me too much.
amdgpu:
- Fix a suspend/resume issue with PSP
- Backlight fix for Renoir
- Fix for gpu recovery debugging
radeon:
- Fix a double free in error path
i915:
- fbc fencing fix
- debugfs panic fix
- gem vma constuction fix
- gem pin under vm->nutex fix
nouveau:
- SVM fixes
- display fixes
meson:
- OSD burst length fixes
hibmc:
- runtime warning fix
mediatek:
- cmdq, mmsys fixes
- visibility check fixes"
* tag 'drm-fixes-2020-07-10' of git://anongit.freedesktop.org/drm/drm: (24 commits)
drm/amdgpu: don't do soft recovery if gpu_recovery=0
drm/radeon: fix double free
drm/amd/display: add dmcub check on RENOIR
drm/amdgpu: add TMR destory function for psp
drm/amdgpu: asd function needs to be unloaded in suspend phase
drm/hisilicon/hibmc: Move drm_fbdev_generic_setup() down to avoid the splat
drm/nouveau/nouveau: fix page fault on device private memory
drm/nouveau/svm: fix migrate page regression
drm/nouveau/i2c/g94-: increase NV_PMGR_DP_AUXCTL_TRANSACTREQ timeout
drm/nouveau/kms/nv50-: bail from nv50_audio_disable() early if audio not enabled
drm/i915/gt: Pin the rings before marking active
drm/i915: Also drop vm.ref along error paths for vma construction
drm/i915: Drop vm.ref for duplicate vma on construction
drm/i915/fbc: Fix fence_y_offset handling
drm/i915: Skip stale object handle for debugfs per-file-stats
drm/mediatek: mtk_hdmi: Remove debug messages for function calls
drm/mediatek: mtk_mt8173_hdmi_phy: Remove unnused const variables
drm/mediatek: Delete not used of_device_get_match_data
drm/mediatek: Remove unnecessary conversion to bool
drm/meson: viu: fix setting the OSD burst length in VIU_OSD1_FIFO_CTRL_STAT
...
While raising the gcc version requirement to 4.9, the compile-time check
in the unroll macro was accidentally changed from being used on gcc and
clang to being used on clang only.
Restore the gcc check, changing it from "gcc >= 4.7" to "all gcc".
[ We should probably remove this all entirely: if we remove the check
for CLANG, then the check for GCC can go away. Older versions of clang
are not really appropriate or supported for kernel builds - Linus ]
Fixes: 6ec4476ac8 ("Raise gcc version requirement to 4.9")
Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.eti.br>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In order for no_refcnt and is_data to be the lowest order two
bits in the 'val' we have to pad out the bitfield of the u8.
Fixes: ad0f75e5f5 ("cgroup: fix cgroup_sk_alloc() for sk_clone_lock()")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix sockmap tests which rely on old bpf_prog_dispatch behaviour.
In the first case, the tests check that detaching without giving
a program succeeds. Since these are not the desired semantics,
invert the condition. In the second case, the clean up code doesn't
supply the necessary program fds.
Fixes: bb0de3131f ("bpf: sockmap: Require attach_bpf_fd when detaching a program")
Reported-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20200709115151.75829-1-lmb@cloudflare.com
Pull device mapper fixes from Mike Snitzer:
- A request-based DM fix to not use a waitqueue to wait for blk-mq IO
completion because doing so is racey.
- A couple more DM zoned target fixes to address issues introduced
during the 5.8 cycle.
- A DM core fix to use proper interface to cleanup DM's static flush
bio.
- A DM core fix to prevent mm recursion during memory allocation needed
by dm_kobject_uevent.
* tag 'for-5.8/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: use noio when sending kobject event
dm zoned: Fix zone reclaim trigger
dm zoned: fix unused but set variable warnings
dm writecache: reject asynchronous pmem devices
dm: use bio_uninit instead of bio_disassociate_blkg
dm: do not use waitqueue for request-based DM
Pull kallsyms fix from Kees Cook:
"Refactor kallsyms_show_value() users for correct cred.
I'm not delighted by the timing of getting these changes to you, but
it does fix a handful of kernel address exposures, and no one has
screamed yet at the patches.
Several users of kallsyms_show_value() were performing checks not
during "open". Refactor everything needed to gain proper checks
against file->f_cred for modules, kprobes, and bpf"
* tag 'kallsyms_show_value-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests: kmod: Add module address visibility test
bpf: Check correct cred for CAP_SYSLOG in bpf_dump_raw_ok()
kprobes: Do not expose probe addresses to non-CAP_SYSLOG
module: Do not expose section addresses to non-CAP_SYSLOG
module: Refactor section attr into bin attribute
kallsyms: Refactor kallsyms_show_value() to take cred
bpf_sk_reuseport_detach is currently called when sk->sk_user_data
is not NULL. It is incorrect because sk->sk_user_data may not be
managed by the bpf's reuseport_array. It has been reported in [1] that,
the bpf_sk_reuseport_detach() which is called from udp_lib_unhash() has
corrupted the sk_user_data managed by l2tp.
This patch solves it by using another bit (defined as SK_USER_DATA_BPF)
of the sk_user_data pointer value. It marks that a sk_user_data is
managed/owned by BPF.
The patch depends on a PTRMASK introduced in
commit f1ff5ce2cd ("net, sk_msg: Clear sk_user_data pointer on clone if tagged").
[ Note: sk->sk_user_data is used by bpf's reuseport_array only when a sk is
added to the bpf's reuseport_array.
i.e. doing setsockopt(SO_REUSEPORT) and having "sk->sk_reuseport == 1"
alone will not stop sk->sk_user_data being used by other means. ]
[1]: https://lore.kernel.org/netdev/20200706121259.GA20199@katalix.com/
Fixes: 5dc4c4b7d4 ("bpf: Introduce BPF_MAP_TYPE_REUSEPORT_SOCKARRAY")
Reported-by: James Chapman <jchapman@katalix.com>
Reported-by: syzbot+9f092552ba9a5efca5df@syzkaller.appspotmail.com
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: James Chapman <jchapman@katalix.com>
Acked-by: James Chapman <jchapman@katalix.com>
Link: https://lore.kernel.org/bpf/20200709061110.4019316-1-kafai@fb.com
It makes little sense for copying sk_user_data of reuseport_array during
sk_clone_lock(). This patch reuses the SK_USER_DATA_NOCOPY bit introduced in
commit f1ff5ce2cd ("net, sk_msg: Clear sk_user_data pointer on clone if tagged").
It is used to mark the sk_user_data is not supposed to be copied to its clone.
Although the cloned sk's sk_user_data will not be used/freed in
bpf_sk_reuseport_detach(), this change can still allow the cloned
sk's sk_user_data to be used by some other means.
Freeing the reuseport_array's sk_user_data does not require a rcu grace
period. Thus, the existing rcu_assign_sk_user_data_nocopy() is not
used.
Fixes: 5dc4c4b7d4 ("bpf: Introduce BPF_MAP_TYPE_REUSEPORT_SOCKARRAY")
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20200709061104.4018798-1-kafai@fb.com
If the genlmsg_put() call in ethnl_default_dumpit() fails, we bail out
without checking if we already have some messages in current skb like we do
with ethnl_default_dump_one() failure later. Therefore if existing messages
almost fill up the buffer so that there is not enough space even for
netlink and genetlink header, we lose all prepared messages and return and
error.
Rather than duplicating the skb->len check, move the genlmsg_put(),
genlmsg_cancel() and genlmsg_end() calls into ethnl_default_dump_one().
This is also more logical as all message composition will be in
ethnl_default_dump_one() and only iteration logic will be left in
ethnl_default_dumpit().
Fixes: 728480f124 ("ethtool: default handlers for GET requests")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When tcf_block_get() fails inside atm_tc_init(),
atm_tc_put() is called to release the qdisc p->link.q.
But the flow->ref prevents it to do so, as the flow->ref
is still zero.
Fix this by moving the p->link.ref initialization before
tcf_block_get().
Fixes: 6529eaba33 ("net: sched: introduce tcf block infractructure")
Reported-and-tested-by: syzbot+d411cff6ab29cc2c311b@syzkaller.appspotmail.com
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
NVM config file address will be modified when the MBI image is upgraded.
Driver would return stale config values if user reads the nvm-config
(via ethtool -d) in this state. The fix is to re-populate nvm attribute
info while reading the nvm config values/partition.
Changes from previous version:
-------------------------------
v3: Corrected the formatting in 'Fixes' tag.
v2: Added 'Fixes' tag.
Fixes: 1ac4329a1c ("qed: Add configuration information to register dump and debug data")
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
