Initialize _evtfd to -1 in struct dev_ctx to prevent garbage output
when running kublk in foreground mode. Without this, _evtfd is
zero-initialized to 0 (stdin), and ublk_send_dev_event() writes
binary data to stdin which appears as garbage on the terminal.
Also fix debug message format string.
Fixes: 6aecda00b7 ("selftests: ublk: add kernel selftests for ublk")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix error handling in ublk_start_daemon() when start_dev fails:
1. Call ublk_ctrl_stop_dev() to cancel inflight uring_cmd before
cleanup. Without this, the device deletion may hang waiting for
I/O completion that will never happen.
2. Add fail_start label so that pthread_join() is called on the
error path. This ensures proper thread cleanup when startup fails.
Fixes: 6aecda00b7 ("selftests: ublk: add kernel selftests for ublk")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Include cmd_inflight in ublk_thread_is_done() check. Without this,
the thread may exit before all FETCH commands are completed, which
may cause device deletion to hang.
Fixes: 6aecda00b7 ("selftests: ublk: add kernel selftests for ublk")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add header dependencies to kublk build rule so that changes to
kublk.h, ublk_dep.h, or utils.h trigger a rebuild.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add test_generic_15.sh to verify that async partition scan prevents
IO hang when reading partition tables.
The test creates ublk devices with fault_inject target and very large
delay (60s) to simulate blocked partition table reads, then kills the
daemon to verify proper state transitions without hanging:
1. Without recovery support:
- Create device with fault_inject and 60s delay
- Kill daemon while partition scan may be blocked
- Verify device transitions to DEAD state
2. With recovery support (-r 1):
- Create device with fault_inject, 60s delay, and recovery
- Kill daemon while partition scan may be blocked
- Verify device transitions to QUIESCED state
Before the async partition scan fix, killing the daemon during
partition scan would cause deadlock as partition scan held ub->mutex
while waiting for IO. With the async fix, partition scan happens in
a work function and flush_work() ensures proper synchronization.
Add _add_ublk_dev_no_settle() helper function to skip udevadm settle,
which would otherwise hang waiting for partition scan events to
complete when partition table read is delayed.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The ublk selftests cover every data copy mode except user copy. Add
tests for user copy based on the existing test suite:
- generic_14 ("basic recover function verification (user copy)") based
on generic_04 and generic_05
- null_03 ("basic IO test with user copy") based on null_01 and null_02
- loop_06 ("write and verify over user copy") based on loop_01 and
loop_03
- loop_07 ("mkfs & mount & umount with user copy") based on loop_02 and
loop_04
- stripe_05 ("write and verify test on user copy") based on stripe_03
- stripe_06 ("mkfs & mount & umount on user copy") based on stripe_02
and stripe_04
- stress_06 ("run IO and remove device (user copy)") based on stress_01
and stress_03
- stress_07 ("run IO and kill ublk server (user copy)") based on
stress_02 and stress_04
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The ublk selftests mock ublk server kublk supports every data copy mode
except user copy. Add support for user copy to kublk, enabled via the
--user_copy (-u) command line argument. On writes, issue pread() calls
to copy the write data into the ublk_io's buffer before dispatching the
write to the target implementation. On reads, issue pwrite() calls to
copy read data from the ublk_io's buffer before committing the request.
Copy in 2 KB chunks to provide some coverage of the offseting logic.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The kublk mock ublk server allows multiple data copy mode arguments to
be passed on the command line (--zero_copy, --get_data, and --auto_zc).
The ublk device will be created with all the requested feature flags,
however kublk will only use one of the modes to interact with request
data (arbitrarily preferring auto_zc over zero_copy over get_data). To
clarify the intent of the test, don't allow multiple data copy modes to
be specified. --zero_copy and --auto_zc are allowed together for
--auto_zc_fallback, which uses both copy modes.
Don't set UBLK_F_USER_COPY for zero_copy, as it's a separate feature.
Fix the test cases in test_stress_05 passing --get_data along with
--zero_copy or --auto_zc.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
stress_04 is missing a wait between blocks of tests, meaning multiple
ublk servers will be running in parallel using the same backing files.
Add a wait after each section to ensure each backing file is in use by a
single ublk server at a time.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
stress_04 is described as "run IO and kill ublk server(zero copy)" but
the --per_io_tasks tests cases don't use zero copy. Plus, one of the
test cases is duplicated. Add --auto_zc to these test cases and
--auto_zc_fallback to one of the duplicated ones. This matches the test
cases in stress_03.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
run_io_and_recover() invokes fio with --size="${size}", but the variable
size doesn't exist. Thus, the argument expands to --size=, which causes
fio to exit immediately with an error without issuing any I/O. Pass the
value for size as the first argument to the function.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The last_rw map is initialized with a value of 0 but later assigned the
value args.sector + args.nr_sector, which has type sector_t = u64.
bpftrace complains about the type mismatch between int64 and uint64:
trace/seq_io.bt:18:3-59: ERROR: Type mismatch for @last_rw: trying to assign value of type 'uint64' when map already contains a value of type 'int64'
@last_rw[$dev, str($2)] = (args.sector + args.nr_sector);
Cast the initial value to uint64 so bpftrace will load the program.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The functions ublk_queue_use_zc(), ublk_queue_use_auto_zc(), and
ublk_queue_auto_zc_fallback() were returning int, but performing
bitwise AND on q->flags which is __u64.
When a flag bit is set in the upper 32 bits (beyond INT_MAX), the
result of the bitwise AND operation could overflow when cast to int,
leading to incorrect boolean evaluation.
For example, if UBLKS_Q_AUTO_BUF_REG_FALLBACK is 0x8000000000000000:
- (u64)flags & 0x8000000000000000 = 0x8000000000000000
- Cast to int: undefined behavior / incorrect value
- Used in if(): may evaluate incorrectly
Fix by:
1. Changing return type from int to bool for semantic correctness
2. Using !! to explicitly convert to boolean (0 or 1)
This ensures the functions return proper boolean values regardless
of which bit position the flags occupy in the 64-bit field.
Fixes: c3a6d48f86 ("selftests: ublk: remove ublk queue self-defined flags")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull block updates from Jens Axboe:
- Fix head insertion for mq-deadline, a regression from when priority
support was added
- Series simplifying and improving the ublk user copy code
- Various ublk related cleanups
- Fixup REQ_NOWAIT handling in loop/zloop, clearing NOWAIT when the
request is punted to a thread for handling
- Merge and then later revert loop dio nowait support, as it ended up
causing excessive stack usage for when the inline issue code needs to
dip back into the full file system code
- Improve auto integrity code, making it less deadlock prone
- Speedup polled IO handling, but manually managing the hctx lookups
- Fixes for blk-throttle for SSD devices
- Small series with fixes for the S390 dasd driver
- Add support for caching zones, avoiding unnecessary report zone
queries
- MD pull requests via Yu:
- fix null-ptr-dereference regression for dm-raid0
- fix IO hang for raid5 when array is broken with IO inflight
- remove legacy 1s delay to speed up system shutdown
- change maintainer's email address
- data can be lost if array is created with different lbs devices,
fix this problem and record lbs of the array in metadata
- fix rcu protection for md_thread
- fix mddev kobject lifetime regression
- enable atomic writes for md-linear
- some cleanups
- bcache updates via Coly
- remove useless discard and cache device code
- improve usage of per-cpu workqueues
- Reorganize the IO scheduler switching code, fixing some lockdep
reports as well
- Improve the block layer P2P DMA support
- Add support to the block tracing code for zoned devices
- Segment calculation improves, and memory alignment flexibility
improvements
- Set of prep and cleanups patches for ublk batching support. The
actual batching hasn't been added yet, but helps shrink down the
workload of getting that patchset ready for 6.20
- Fix for how the ps3 block driver handles segments offsets
- Improve how block plugging handles batch tag allocations
- nbd fixes for use-after-free of the configuration on device clear/put
- Set of improvements and fixes for zloop
- Add Damien as maintainer of the block zoned device code handling
- Various other fixes and cleanups
* tag 'for-6.19/block-20251201' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (162 commits)
block/rnbd: correct all kernel-doc complaints
blk-mq: use queue_hctx in blk_mq_map_queue_type
md: remove legacy 1s delay in md_notify_reboot
md/raid5: fix IO hang when array is broken with IO inflight
md: warn about updating super block failure
md/raid0: fix NULL pointer dereference in create_strip_zones() for dm-raid
sbitmap: fix all kernel-doc warnings
ublk: add helper of __ublk_fetch()
ublk: pass const pointer to ublk_queue_is_zoned()
ublk: refactor auto buffer register in ublk_dispatch_req()
ublk: add `union ublk_io_buf` with improved naming
ublk: add parameter `struct io_uring_cmd *` to ublk_prep_auto_buf_reg()
kfifo: add kfifo_alloc_node() helper for NUMA awareness
blk-mq: fix potential uaf for 'queue_hw_ctx'
blk-mq: use array manage hctx map instead of xarray
ublk: prevent invalid access with DEBUG
s390/dasd: Use scnprintf() instead of sprintf()
s390/dasd: Move device name formatting into separate function
s390/dasd: Remove unnecessary debugfs_create() return checks
s390/dasd: Fix gendisk parent after copy pair swap
...
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Replace busylock at the Tx queuing layer with a lockless list.
Resulting in a 300% (4x) improvement on heavy TX workloads, sending
twice the number of packets per second, for half the cpu cycles.
- Allow constantly busy flows to migrate to a more suitable CPU/NIC
queue.
Normally we perform queue re-selection when flow comes out of idle,
but under extreme circumstances the flows may be constantly busy.
Add sysctl to allow periodic rehashing even if it'd risk packet
reordering.
- Optimize the NAPI skb cache, make it larger, use it in more paths.
- Attempt returning Tx skbs to the originating CPU (like we already
did for Rx skbs).
- Various data structure layout and prefetch optimizations from Eric.
- Remove ktime_get() from the recvmsg() fast path, ktime_get() is
sadly quite expensive on recent AMD machines.
- Extend threaded NAPI polling to allow the kthread busy poll for
packets.
- Make MPTCP use Rx backlog processing. This lowers the lock
pressure, improving the Rx performance.
- Support memcg accounting of MPTCP socket memory.
- Allow admin to opt sockets out of global protocol memory accounting
(using a sysctl or BPF-based policy). The global limits are a poor
fit for modern container workloads, where limits are imposed using
cgroups.
- Improve heuristics for when to kick off AF_UNIX garbage collection.
- Allow users to control TCP SACK compression, and default to 33% of
RTT.
- Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid
unnecessarily aggressive rcvbuf growth and overshot when the
connection RTT is low.
- Preserve skb metadata space across skb_push / skb_pull operations.
- Support for IPIP encapsulation in the nftables flowtable offload.
- Support appending IP interface information to ICMP messages (RFC
5837).
- Support setting max record size in TLS (RFC 8449).
- Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL.
- Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock.
- Let users configure the number of write buffers in SMC.
- Add new struct sockaddr_unsized for sockaddr of unknown length,
from Kees.
- Some conversions away from the crypto_ahash API, from Eric Biggers.
- Some preparations for slimming down struct page.
- YAML Netlink protocol spec for WireGuard.
- Add a tool on top of YAML Netlink specs/lib for reporting commonly
computed derived statistics and summarized system state.
Driver API:
- Add CAN XL support to the CAN Netlink interface.
- Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics, as
defined by the OPEN Alliance's "Advanced diagnostic features for
100BASE-T1 automotive Ethernet PHYs" specification.
- Add DPLL phase-adjust-gran pin attribute (and implement it in
zl3073x).
- Refactor xfrm_input lock to reduce contention when NIC offloads
IPsec and performs RSS.
- Add info to devlink params whether the current setting is the
default or a user override. Allow resetting back to default.
- Add standard device stats for PSP crypto offload.
- Leverage DSA frame broadcast to implement simple HSR frame
duplication for a lot of switches without dedicated HSR offload.
- Add uAPI defines for 1.6Tbps link modes.
Device drivers:
- Add Motorcomm YT921x gigabit Ethernet switch support.
- Add MUCSE driver for N500/N210 1GbE NIC series.
- Convert drivers to support dedicated ops for timestamping control,
and away from the direct IOCTL handling. While at it support GET
operations for PHY timestamping.
- Add (and convert most drivers to) a dedicated ethtool callback for
reading the Rx ring count.
- Significant refactoring efforts in the STMMAC driver, which
supports Synopsys turn-key MAC IP integrated into a ton of SoCs.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support PPS in/out on all pins
- Intel (100G, ice, idpf):
- ice: implement standard ethtool and timestamping stats
- i40e: support setting the max number of MAC addresses per VF
- iavf: support RSS of GTP tunnels for 5G and LTE deployments
- nVidia/Mellanox (mlx5):
- reduce downtime on interface reconfiguration
- disable being an XDP redirect target by default (same as
other drivers) to avoid wasting resources if feature is
unused
- Meta (fbnic):
- add support for Linux-managed PCS on 25G, 50G, and 100G links
- Wangxun:
- support Rx descriptor merge, and Tx head writeback
- support Rx coalescing offload
- support 25G SPF and 40G QSFP modules
- Ethernet virtual:
- Google (gve):
- allow ethtool to configure rx_buf_len
- implement XDP HW RX Timestamping support for DQ descriptor
format
- Microsoft vNIC (mana):
- support HW link state events
- handle hardware recovery events when probing the device
- Ethernet NICs consumer, and embedded:
- usbnet: add support for Byte Queue Limits (BQL)
- AMD (amd-xgbe):
- add device selftests
- NXP (enetc):
- add i.MX94 support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- bcmasp: add support for PHY-based Wake-on-LAN
- Broadcom switches (b53):
- support port isolation
- support BCM5389/97/98 and BCM63XX ARL formats
- Lantiq/MaxLinear switches:
- support bridge FDB entries on the CPU port
- use regmap for register access
- allow user to enable/disable learning
- support Energy Efficient Ethernet
- support configuring RMII clock delays
- add tagging driver for MaxLinear GSW1xx switches
- Synopsys (stmmac):
- support using the HW clock in free running mode
- add Eswin EIC7700 support
- add Rockchip RK3506 support
- add Altera Agilex5 support
- Cadence (macb):
- cleanup and consolidate descriptor and DMA address handling
- add EyeQ5 support
- TI:
- icssg-prueth: support AF_XDP
- Airoha access points:
- add missing Ethernet stats and link state callback
- add AN7583 support
- support out-of-order Tx completion processing
- Power over Ethernet:
- pd692x0: preserve PSE configuration across reboots
- add support for TPS23881B devices
- Ethernet PHYs:
- Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support
- Support 50G SerDes and 100G interfaces in Linux-managed PHYs
- micrel:
- support for non PTP SKUs of lan8814
- enable in-band auto-negotiation on lan8814
- realtek:
- cable testing support on RTL8224
- interrupt support on RTL8221B
- motorcomm: support for PHY LEDs on YT853
- microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag
- mscc: support for PHY LED control
- CAN drivers:
- m_can: add support for optional reset and system wake up
- remove can_change_mtu() obsoleted by core handling
- mcp251xfd: support GPIO controller functionality
- Bluetooth:
- add initial support for PASTa
- WiFi:
- split ieee80211.h file, it's way too big
- improvements in VHT radiotap reporting, S1G, Channel Switch
Announcement handling, rate tracking in mesh networks
- improve multi-radio monitor mode support, and add a cfg80211
debugfs interface for it
- HT action frame handling on 6 GHz
- initial chanctx work towards NAN
- MU-MIMO sniffer improvements
- WiFi drivers:
- RealTek (rtw89):
- support USB devices RTL8852AU and RTL8852CU
- initial work for RTL8922DE
- improved injection support
- Intel:
- iwlwifi: new sniffer API support
- MediaTek (mt76):
- WED support for >32-bit DMA
- airoha NPU support
- regdomain improvements
- continued WiFi7/MLO work
- Qualcomm/Atheros:
- ath10k: factory test support
- ath11k: TX power insertion support
- ath12k: BSS color change support
- ath12k: statistics improvements
- brcmfmac: Acer A1 840 tablet quirk
- rtl8xxxu: 40 MHz connection fixes/support"
* tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1381 commits)
net: page_pool: sanitise allocation order
net: page pool: xa init with destroy on pp init
net/mlx5e: Support XDP target xmit with dummy program
net/mlx5e: Update XDP features in switch channels
selftests/tc-testing: Test CAKE scheduler when enqueue drops packets
net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop
wireguard: netlink: generate netlink code
wireguard: uapi: generate header with ynl-gen
wireguard: uapi: move flag enums
wireguard: uapi: move enum wg_cmd
wireguard: netlink: add YNL specification
selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py
selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py
selftests: drv-net: Set shell=True for sysfs writes in devlink_rate_tc_bw.py
selftests: drv-net: Use Iperf3Runner in devlink_rate_tc_bw.py
selftests: drv-net: introduce Iperf3Runner for measurement use cases
selftests: drv-net: Add devlink_rate_tc_bw.py to TEST_PROGS
net: ps3_gelic_net: Use napi_alloc_skb() and napi_gro_receive()
Documentation: net: dsa: mention simple HSR offload helpers
Documentation: net: dsa: mention availability of RedBox
...
Pull bpf updates from Alexei Starovoitov:
- Convert selftests/bpf/test_tc_edt and test_tc_tunnel from .sh to
test_progs runner (Alexis Lothoré)
- Convert selftests/bpf/test_xsk to test_progs runner (Bastien
Curutchet)
- Replace bpf memory allocator with kmalloc_nolock() in
bpf_local_storage (Amery Hung), and in bpf streams and range tree
(Puranjay Mohan)
- Introduce support for indirect jumps in BPF verifier and x86 JIT
(Anton Protopopov) and arm64 JIT (Puranjay Mohan)
- Remove runqslower bpf tool (Hoyeon Lee)
- Fix corner cases in the verifier to close several syzbot reports
(Eduard Zingerman, KaFai Wan)
- Several improvements in deadlock detection in rqspinlock (Kumar
Kartikeya Dwivedi)
- Implement "jmp" mode for BPF trampoline and corresponding
DYNAMIC_FTRACE_WITH_JMP. It improves "fexit" program type performance
from 80 M/s to 136 M/s. With Steven's Ack. (Menglong Dong)
- Add ability to test non-linear skbs in BPF_PROG_TEST_RUN (Paul
Chaignon)
- Do not let BPF_PROG_TEST_RUN emit invalid GSO types to stack (Daniel
Borkmann)
- Generalize buildid reader into bpf_dynptr (Mykyta Yatsenko)
- Optimize bpf_map_update_elem() for map-in-map types (Ritesh
Oedayrajsingh Varma)
- Introduce overwrite mode for BPF ring buffer (Xu Kuohai)
* tag 'bpf-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (169 commits)
bpf: optimize bpf_map_update_elem() for map-in-map types
bpf: make kprobe_multi_link_prog_run always_inline
selftests/bpf: do not hardcode target rate in test_tc_edt BPF program
selftests/bpf: remove test_tc_edt.sh
selftests/bpf: integrate test_tc_edt into test_progs
selftests/bpf: rename test_tc_edt.bpf.c section to expose program type
selftests/bpf: Add success stats to rqspinlock stress test
rqspinlock: Precede non-head waiter queueing with AA check
rqspinlock: Disable spinning for trylock fallback
rqspinlock: Use trylock fallback when per-CPU rqnode is busy
rqspinlock: Perform AA checks immediately
rqspinlock: Enclose lock/unlock within lock entry acquisitions
bpf: Remove runqslower tool
selftests/bpf: Remove usage of lsm/file_alloc_security in selftest
bpf: Disable file_alloc_security hook
bpf: check for insn arrays in check_ptr_alignment
bpf: force BPF_F_RDONLY_PROG on insn array creation
bpf: Fix exclusive map memory leak
selftests/bpf: Make CS length configurable for rqspinlock stress test
selftests/bpf: Add lock wait time stats to rqspinlock stress test
...
Pull kselftest updates from Shuah Khan:
- Add basic test for trace_marker_raw file to tracing selftest
- Fix invalid array access in printf dma_map_benchmark selftest
- Add tprobe enable/disable testcase to tracing selftest
- Update fprobe selftest for ftrace based fprobe
* tag 'linux_kselftest-next-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: tracing: Update fprobe selftest for ftrace based fprobe
selftests: tracing: Add tprobe enable/disable testcase
selftests/run_kselftest.sh: exit with error if tests fail
selftests/dma: fix invalid array access in printf
selftests/tracing: Add basic test for trace_marker_raw file
Pull livepatching updates from Petr Mladek:
- Support both paths where tracefs is typically mounted in selftests
- Make old_sympos 0 and 1 equal. They both are valid when there is only
one symbol with the given name.
* tag 'livepatching-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
selftests: livepatch: use canonical ftrace path
livepatch: Match old_sympos 0 and 1 in klp_find_func()
Pull sched_ext updates from Tejun Heo:
- Improve recovery from misbehaving BPF schedulers.
When a scheduler puts many tasks with varying affinity restrictions
on a shared DSQ, CPUs scanning through tasks they cannot run can
overwhelm the system, causing lockups.
Bypass mode now uses per-CPU DSQs with a load balancer to avoid this,
and hooks into the hardlockup detector to attempt recovery.
Add scx_cpu0 example scheduler to demonstrate this scenario.
- Add lockless peek operation for DSQs to reduce lock contention for
schedulers that need to query queue state during load balancing.
- Allow scx_bpf_reenqueue_local() to be called from anywhere in
preparation for deprecating cpu_acquire/release() callbacks in favor
of generic BPF hooks.
- Prepare for hierarchical scheduler support: add
scx_bpf_task_set_slice() and scx_bpf_task_set_dsq_vtime() kfuncs,
make scx_bpf_dsq_insert*() return bool, and wrap kfunc args in
structs for future aux__prog parameter.
- Implement cgroup_set_idle() callback to notify BPF schedulers when a
cgroup's idle state changes.
- Fix migration tasks being incorrectly downgraded from
stop_sched_class to rt_sched_class across sched_ext enable/disable.
Applied late as the fix is low risk and the bug subtle but needs
stable backporting.
- Various fixes and cleanups including cgroup exit ordering,
SCX_KICK_WAIT reliability, and backward compatibility improvements.
* tag 'sched_ext-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: (44 commits)
sched_ext: Fix incorrect sched_class settings for per-cpu migration tasks
sched_ext: tools: Removing duplicate targets during non-cross compilation
sched_ext: Use kvfree_rcu() to release per-cpu ksyncs object
sched_ext: Pass locked CPU parameter to scx_hardlockup() and add docs
sched_ext: Update comments replacing breather with aborting mechanism
sched_ext: Implement load balancer for bypass mode
sched_ext: Factor out abbreviated dispatch dequeue into dispatch_dequeue_locked()
sched_ext: Factor out scx_dsq_list_node cursor initialization into INIT_DSQ_LIST_CURSOR
sched_ext: Add scx_cpu0 example scheduler
sched_ext: Hook up hardlockup detector
sched_ext: Make handle_lockup() propagate scx_verror() result
sched_ext: Refactor lockup handlers into handle_lockup()
sched_ext: Make scx_exit() and scx_vexit() return bool
sched_ext: Exit dispatch and move operations immediately when aborting
sched_ext: Simplify breather mechanism with scx_aborting flag
sched_ext: Use per-CPU DSQs instead of per-node global DSQs in bypass mode
sched_ext: Refactor do_enqueue_task() local and global DSQ paths
sched_ext: Use shorter slice in bypass mode
sched_ext: Mark racy bitfields to prevent adding fields that can't tolerate races
sched_ext: Minor cleanups to scx_task_iter
...
Pull cgroup updates from Tejun Heo:
- Defer task cgroup unlink until after the dying task's final context
switch so that controllers see the cgroup properly populated until
the task is truly gone
- cpuset cleanups and simplifications.
Enforce that domain isolated CPUs stay in root or isolated partitions
and fail if isolated+nohz_full would leave no housekeeping CPU. Fix
sched/deadline root domain handling during CPU hot-unplug and race
for tasks in attaching cpusets
- Misc fixes including memory reclaim protection documentation and
selftest KTAP conformance
* tag 'cgroup-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (21 commits)
cpuset: Treat cpusets in attaching as populated
sched/deadline: Walk up cpuset hierarchy to decide root domain when hot-unplug
cgroup/cpuset: Introduce cpuset_cpus_allowed_locked()
docs: cgroup: No special handling of unpopulated memcgs
docs: cgroup: Note about sibling relative reclaim protection
docs: cgroup: Explain reclaim protection target
selftests/cgroup: conform test to KTAP format output
cpuset: remove need_rebuild_sched_domains
cpuset: remove global remote_children list
cpuset: simplify node setting on error
cgroup: include missing header for struct irq_work
cgroup: Fix sleeping from invalid context warning on PREEMPT_RT
cgroup/cpuset: Globally track isolated_cpus update
cgroup/cpuset: Ensure domain isolated CPUs stay in root or isolated partition
cgroup/cpuset: Move up prstate_housekeeping_conflict() helper
cgroup/cpuset: Fail if isolated and nohz_full don't leave any housekeeping
cgroup/cpuset: Rename update_unbound_workqueue_cpumask() to update_isolation_cpumasks()
cgroup: Defer task cgroup unlink until after the task is done switching out
cgroup: Move dying_tasks cleanup from cgroup_task_release() to cgroup_task_free()
cgroup: Rename cgroup lifecycle hooks to cgroup_task_*()
...
Pull RCU updates from Frederic Weisbecker:
"SRCU:
- Properly handle SRCU readers within IRQ disabled sections in tiny
SRCU
- Preparation to reimplement RCU Tasks Trace on top of SRCU fast:
- Introduce API to expedite a grace period and test it through
rcutorture
- Split srcu-fast in two flavours: SRCU-fast and SRCU-fast-updown.
Both are still targeted toward faster readers (without full
barriers on LOCK and UNLOCK) at the expense of heavier write
side (using full RCU grace period ordering instead of simply
full ordering) as compared to "traditional" non-fast SRCU. But
those srcu-fast flavours are going to be optimized in two
different ways:
- SRCU-fast will become the reimplementation basis for
RCU-TASK-TRACE for consolidation. Since RCU-TASK-TRACE must
be NMI safe, SRCU-fast must be as well.
- SRCU-fast-updown will be needed for uretprobes code in order
to get rid of the read-side memory barriers while still
allowing entering the reader at task level while exiting it
in a timer handler. It is considered semaphore-like in that
it can have different owners between LOCK and UNLOCK.
However it is not NMI-safe.
The actual optimizations are work in progress for the next
cycle. Only the new interfaces are added for now, along with
related torture and scalability test code.
- Create/document/debug/torture new proper initializers for RCU fast:
DEFINE_SRCU_FAST() and init_srcu_struct_fast()
This allows for using right away the proper ordering on the write
side (either full ordering or full RCU grace period ordering)
without waiting for the read side to tell which to use.
This also optimizes the read side altogether with moving flavour
debug checks under debug config and with removing a costly RmW
operation on their first call.
- Make some diagnostic functions tracing safe
Refscale:
- Add performance testing for common context synchronizations
(Preemption, IRQ, Softirq) and per-cpu increments. Those are
relevant comparisons against SRCU-fast read side APIs, especially
as they are planned to synchronize further tracing fast-path code
Miscellanous:
- In order to prepare the layout for nohz_full work deferral to user
exit, the context tracking state must shrink the counter of
transitions to/from RCU not watching. The only possible hazard is
to trigger wrap-around more easily, delaying a bit grace periods
when that happens. This should be a rare event though. Yet add
debugging and torture code to test that assumption
- Fix memory leak on locktorture module
- Annotate accesses in rculist_nulls.h to prevent from KCSAN
warnings. On recent discussions, we also concluded that all those
WRITE_ONCE() and READ_ONCE() on list APIs deserve appropriate
comments. Something to be expected for the next cycle
- Provide a script to apply several configs to several commits with
torture
- Allow torture to reuse a build directory in order to save needless
rebuild time
- Various cleanups"
* tag 'rcu.release.v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (29 commits)
refscale: Add SRCU-fast-updown readers
refscale: Exercise DEFINE_STATIC_SRCU_FAST() and init_srcu_struct_fast()
rcutorture: Make srcu{,d}_torture_init() announce the SRCU type
srcu: Create an SRCU-fast-updown API
refscale: Do not disable interrupts for tests involving local_bh_enable()
refscale: Add non-atomic per-CPU increment readers
refscale: Add this_cpu_inc() readers
refscale: Add preempt_disable() readers
refscale: Add local_bh_disable() readers
refscale: Add local_irq_disable() and local_irq_save() readers
torture: Permit negative kvm.sh --kconfig numberic arguments
srcu: Add SRCU_READ_FLAVOR_FAST_UPDOWN CPP macro
rcu: Mark diagnostic functions as notrace
rcutorture: Make TREE04 use CONFIG_RCU_DYNTICKS_TORTURE
rcutorture: Remove redundant rcutorture_one_extend() from rcu_torture_one_read()
rcutorture: Permit kvm-again.sh to re-use the build directory
torture: Add kvm-series.sh to test commit/scenario combination
rcu: use WRITE_ONCE() for ->next and ->pprev of hlist_nulls
locktorture: Fix memory leak in param_set_cpumask()
doc: Update for SRCU-fast definitions and initialization
...
Pull nolibc updates from Thomas Weißschuh:
- Preparations to the use of nolibc in UML:
- Cleanup of sparse warnings
- Library mode without _start()
- More consistency when disabling errno
- Unconditional installation of all architecture support files
- Always 64-bit wide ino_t and off_t
- Various cleanups and bug fixes
* tag 'nolibc-20251130-for-6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc: (25 commits)
selftests/nolibc: error out on linker warnings
selftests/nolibc: use lld to link loongarch binaries
tools/nolibc: remove more __nolibc_enosys() fallbacks
tools/nolibc: remove now superfluous overflow check in llseek
tools/nolibc: use 64-bit off_t
tools/nolibc: prefer the llseek syscall
tools/nolibc: handle 64-bit off_t for llseek
tools/nolibc: use 64-bit ino_t
tools/nolibc: avoid using plain integer as NULL pointer
tools/nolibc: add support for fchdir()
tools/nolibc: clean up outdated comments in generic arch.h
tools/nolibc: make the "headers" target install all supported archs
tools/nolibc: add the more portable inttypes.h
tools/nolibc: provide the portable sys/select.h
tools/nolibc: add missing memchr() to string.h
tools/nolibc: fix misleading help message regarding installation path
tools/nolibc: add uio.h with readv and writev
tools/nolibc: add option to disable runtime
tools/nolibc: use __fallthrough__ rather than fallthrough
tools/nolibc: implement %m if errno is not defined
...
Pull arm64 updates from Catalin Marinas:
"These are the arm64 updates for 6.19.
The biggest part is the Arm MPAM driver under drivers/resctrl/.
There's a patch touching mm/ to handle spurious faults for huge pmd
(similar to the pte version). The corresponding arm64 part allows us
to avoid the TLB maintenance if a (huge) page is reused after a write
fault. There's EFI refactoring to allow runtime services with
preemption enabled and the rest is the usual perf/PMU updates and
several cleanups/typos.
Summary:
Core features:
- Basic Arm MPAM (Memory system resource Partitioning And Monitoring)
driver under drivers/resctrl/ which makes use of the fs/rectrl/ API
Perf and PMU:
- Avoid cycle counter on multi-threaded CPUs
- Extend CSPMU device probing and add additional filtering support
for NVIDIA implementations
- Add support for the PMUs on the NoC S3 interconnect
- Add additional compatible strings for new Cortex and C1 CPUs
- Add support for data source filtering to the SPE driver
- Add support for i.MX8QM and "DB" PMU in the imx PMU driver
Memory managemennt:
- Avoid broadcast TLBI if page reused in write fault
- Elide TLB invalidation if the old PTE was not valid
- Drop redundant cpu_set_*_tcr_t0sz() macros
- Propagate pgtable_alloc() errors outside of __create_pgd_mapping()
- Propagate return value from __change_memory_common()
ACPI and EFI:
- Call EFI runtime services without disabling preemption
- Remove unused ACPI function
Miscellaneous:
- ptrace support to disable streaming on SME-only systems
- Improve sysreg generation to include a 'Prefix' descriptor
- Replace __ASSEMBLY__ with __ASSEMBLER__
- Align register dumps in the kselftest zt-test
- Remove some no longer used macros/functions
- Various spelling corrections"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (94 commits)
arm64/mm: Document why linear map split failure upon vm_reset_perms is not problematic
arm64/pageattr: Propagate return value from __change_memory_common
arm64/sysreg: Remove unused define ARM64_FEATURE_FIELD_BITS
KVM: arm64: selftests: Consider all 7 possible levels of cache
KVM: arm64: selftests: Remove ARM64_FEATURE_FIELD_BITS and its last user
arm64: atomics: lse: Remove unused parameters from ATOMIC_FETCH_OP_AND macros
Documentation/arm64: Fix the typo of register names
ACPI: GTDT: Get rid of acpi_arch_timer_mem_init()
perf: arm_spe: Add support for filtering on data source
perf: Add perf_event_attr::config4
perf/imx_ddr: Add support for PMU in DB (system interconnects)
perf/imx_ddr: Get and enable optional clks
perf/imx_ddr: Move ida_alloc() from ddr_perf_init() to ddr_perf_probe()
dt-bindings: perf: fsl-imx-ddr: Add compatible string for i.MX8QM, i.MX8QXP and i.MX8DXL
arm64: remove duplicate ARCH_HAS_MEM_ENCRYPT
arm64: mm: use untagged address to calculate page index
MAINTAINERS: new entry for MPAM Driver
arm_mpam: Add kunit tests for props_mismatch()
arm_mpam: Add kunit test for bitmap reset
arm_mpam: Add helper to reset saved mbwu state
...
Pull s390 updates from Heiko Carstens:
- Provide a new interface for dynamic configuration and deconfiguration
of hotplug memory, allowing with and without memmap_on_memory
support. This makes the way memory hotplug is handled on s390 much
more similar to other architectures
- Remove compat support. There shouldn't be any compat user space
around anymore, therefore get rid of a lot of code which also doesn't
need to be tested anymore
- Add stackprotector support. GCC 16 will get new compiler options,
which allow to generate code required for kernel stackprotector
support
- Merge pai_crypto and pai_ext PMU drivers into a new driver. This
removes a lot of duplicated code. The new driver is also extendable
and allows to support new PMUs
- Add driver override support for AP queues
- Rework and extend zcrypt and AP trace events to allow for tracing of
crypto requests
- Support block sizes larger than 65535 bytes for CCW tape devices
- Since the rework of the virtual kernel address space the module area
and the kernel image are within the same 4GB area. This eliminates
the need of weak per cpu variables. Get rid of
ARCH_MODULE_NEEDS_WEAK_PER_CPU
- Various other small improvements and fixes
* tag 's390-6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (92 commits)
watchdog: diag288_wdt: Remove KMSG_COMPONENT macro
s390/entry: Use lay instead of aghik
s390/vdso: Get rid of -m64 flag handling
s390/vdso: Rename vdso64 to vdso
s390: Rename head64.S to head.S
s390/vdso: Use common STABS_DEBUG and DWARF_DEBUG macros
s390: Add stackprotector support
s390/modules: Simplify module_finalize() slightly
s390: Remove KMSG_COMPONENT macro
s390/percpu: Get rid of ARCH_MODULE_NEEDS_WEAK_PER_CPU
s390/ap: Restrict driver_override versus apmask and aqmask use
s390/ap: Rename mutex ap_perms_mutex to ap_attr_mutex
s390/ap: Support driver_override for AP queue devices
s390/ap: Use all-bits-one apmask/aqmask for vfio in_use() checks
s390/debug: Update description of resize operation
s390/syscalls: Switch to generic system call table generation
s390/syscalls: Remove system call table pointer from thread_struct
s390/uapi: Remove 31 bit support from uapi header files
s390: Remove compat support
tools: Remove s390 compat support
...
Pull x86 CPU feature updates from Dave Hansen:
"The biggest thing of note here is Linear Address Space Separation
(LASS). It represents the first time I can think of that the
upper=>kernel/lower=>user address space convention is actually
recognized by the hardware on x86. It ensures that userspace can not
even get the hardware to _start_ page walks for the kernel address
space. This, of course, is a really nice generic side channel defense.
This is really only a down payment on LASS support. There are still
some details to work out in its interaction with EFI calls and
vsyscall emulation. For now, LASS is disabled if either of those
features is compiled in (which is almost always the case).
There's also one straggler commit in here which converts an
under-utilized AMD CPU feature leaf into a generic Linux-defined leaf
so more feature can be packed in there.
Summary:
- Enable Linear Address Space Separation (LASS)
- Change X86_FEATURE leaf 17 from an AMD leaf to Linux-defined"
* tag 'x86_cpu_for_6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Enable LASS during CPU initialization
selftests/x86: Update the negative vsyscall tests to expect a #GP
x86/traps: Communicate a LASS violation in #GP message
x86/kexec: Disable LASS during relocate kernel
x86/alternatives: Disable LASS when patching kernel code
x86/asm: Introduce inline memcpy and memset
x86/cpu: Add an LASS dependency on SMAP
x86/cpufeatures: Enumerate the LASS feature bits
x86/cpufeatures: Make X86_FEATURE leaf 17 Linux-specific
Pull timer core updates from Thomas Gleixner:
- Prevent a thundering herd problem when the timekeeper CPU is delayed
and a large number of CPUs compete to acquire jiffies_lock to do the
update. Limit it to one CPU with a separate "uncontended" atomic
variable.
- A set of improvements for the timer migration mechanism:
- Support imbalanced NUMA trees correctly
- Support dynamic exclusion of CPUs from the migrator duty to allow
the cpuset/isolation mechanism to exclude them from handling
timers of remote idle CPUs
- The usual small updates, cleanups and enhancements
* tag 'timers-core-2025-11-30' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers/migration: Exclude isolated cpus from hierarchy
cpumask: Add initialiser to use cleanup helpers
sched/isolation: Force housekeeping if isolcpus and nohz_full don't leave any
cgroup/cpuset: Rename update_unbound_workqueue_cpumask() to update_isolation_cpumasks()
timers/migration: Use scoped_guard on available flag set/clear
timers/migration: Add mask for CPUs available in the hierarchy
timers/migration: Rename 'online' bit to 'available'
selftests/timers/nanosleep: Add tests for return of remaining time
selftests/timers: Clean up kernel version check in posix_timers
time: Fix a few typos in time[r] related code comments
time: tick-oneshot: Add missing Return and parameter descriptions to kernel-doc
hrtimer: Store time as ktime_t in restart block
timers/migration: Remove dead code handling idle CPU checking for remote timers
timers/migration: Remove unused "cpu" parameter from tmigr_get_group()
timers/migration: Assert that hotplug preparing CPU is part of stable active hierarchy
timers/migration: Fix imbalanced NUMA trees
timers/migration: Remove locking on group connection
timers/migration: Convert "while" loops to use "for"
tick/sched: Limit non-timekeeper CPUs calling jiffies update
Add tests that trigger packet drops in cake_enqueue(): "CAKE with QFQ
Parent - CAKE enqueue with packets dropping". It forces CAKE_enqueue to
return NET_XMIT_CN after dropping the packets when it has a QFQ parent.
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Reviewed-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20251128001415.377823-3-xmei5@asu.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, tolerance is computed against the TC’s expected percentage,
making TC3 (20%) validation overly strict and TC4 (80%) overly loose.
Update BandwidthValidator to take a dict of shares and compute bounds
relative to the overall total, so that all shares are validated
consistently.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20251130091938.4109055-7-cjubran@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 7c32f7a2d3db ("selftests: net: py: don't default to shell=True")
changed the cmd() helper to avoid spawning a shell unless explicitly
requested.
The devlink_rate_tc_bw test enables SR-IOV by writing to the
sriov_numvfs sysfs attribute using redirection. Without shell=True the
redirection is not interpreted and the VF device never appears,
causing the test to fail.
Fix by explicitly passing shell=True in the two places that update
sriov_numvfs.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20251130091938.4109055-5-cjubran@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
GenerateTraffic was added to spin up long-running iperf3 load, mainly
to drive high PPS background traffic. It was never meant to provide
stable throughput numbers, and trying to repurpose it for measurement
does not make sense.
Introduce Iperf3Runner to allow tests to split out server/client
configuration, control start/stop, and collect JSON output for
analysis. This makes it possible to measure bandwidth directly when
validating egress shaping.
GenerateTraffic stays as the background load generator, reusing the
common iperf3 helpers under the hood.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20251130091938.4109055-3-cjubran@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This removes some noise that can be distracting while looking at
selftests by redirecting socat stderr to /dev/null.
Before this commit, netcons_basic would output:
Running with target mode: basic (ipv6)
2025/11/29 12:08:03 socat[259] W exiting on signal 15
2025/11/29 12:08:03 socat[271] W exiting on signal 15
basic : ipv6 : Test passed
Running with target mode: basic (ipv4)
2025/11/29 12:08:05 socat[329] W exiting on signal 15
2025/11/29 12:08:05 socat[322] W exiting on signal 15
basic : ipv4 : Test passed
Running with target mode: extended (ipv6)
2025/11/29 12:08:08 socat[386] W exiting on signal 15
2025/11/29 12:08:08 socat[386] W exiting on signal 15
2025/11/29 12:08:08 socat[380] W exiting on signal 15
extended : ipv6 : Test passed
Running with target mode: extended (ipv4)
2025/11/29 12:08:10 socat[440] W exiting on signal 15
2025/11/29 12:08:10 socat[435] W exiting on signal 15
2025/11/29 12:08:10 socat[435] W exiting on signal 15
extended : ipv4 : Test passed
After these changes, output looks like:
Running with target mode: basic (ipv6)
basic : ipv6 : Test passed
Running with target mode: basic (ipv4)
basic : ipv4 : Test passed
Running with target mode: extended (ipv6)
extended : ipv6 : Test passed
Running with target mode: extended (ipv4)
extended : ipv4 : Test passed
Signed-off-by: Andre Carvalho <asantostc@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251129-netcons-socat-noise-v1-1-605a0cea8fca@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
New NIPA installation had been reporting a few flaky tests.
arp_ndisc_evict_nocarrier is most flaky of them all.
I suspect that the flakiness is due to udev swapping the MAC
addresses on the interfaces. Extend the message in
arp_ndisc_evict_nocarrier to hint at this potential issue.
Having the neigh get fail right after ping is rather unusual,
unless udev changes the MAC addr causing a flush in the meantime.
Link: https://patch.msgid.link/20251127194556.2409574-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull pidfd and coredump updates from Christian Brauner:
"Features:
- Expose coredump signal via pidfd
Expose the signal that caused the coredump through the pidfd
interface. The recent changes to rework coredump handling to rely
on unix sockets are in the process of being used in systemd. The
previous systemd coredump container interface requires the coredump
file descriptor and basic information including the signal number
to be sent to the container. This means the signal number needs to
be available before sending the coredump to the container.
- Add supported_mask field to pidfd
Add a new supported_mask field to struct pidfd_info that indicates
which information fields are supported by the running kernel. This
allows userspace to detect feature availability without relying on
error codes or kernel version checks.
Cleanups:
- Drop struct pidfs_exit_info and prepare to drop exit_info pointer,
simplifying the internal publication mechanism for exit and
coredump information retrievable via the pidfd ioctl
- Use guard() for task_lock in pidfs
- Reduce wait_pidfd lock scope
- Add missing PIDFD_INFO_SIZE_VER1 constant
- Add missing BUILD_BUG_ON() assert on struct pidfd_info
Fixes:
- Fix PIDFD_INFO_COREDUMP handling
Selftests:
- Split out coredump socket tests and common helpers into separate
files for better organization
- Fix userspace coredump client detection issues
- Handle edge-triggered epoll correctly
- Ignore ENOSPC errors in tests
- Add debug logging to coredump socket tests, socket protocol tests,
and test helpers
- Add tests for PIDFD_INFO_COREDUMP_SIGNAL
- Add tests for supported_mask field
- Update pidfd header for selftests"
* tag 'vfs-6.19-rc1.coredump' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (23 commits)
pidfs: reduce wait_pidfd lock scope
selftests/coredump: add second PIDFD_INFO_COREDUMP_SIGNAL test
selftests/coredump: add first PIDFD_INFO_COREDUMP_SIGNAL test
selftests/coredump: ignore ENOSPC errors
selftests/coredump: add debug logging to coredump socket protocol tests
selftests/coredump: add debug logging to coredump socket tests
selftests/coredump: add debug logging to test helpers
selftests/coredump: handle edge-triggered epoll correctly
selftests/coredump: fix userspace coredump client detection
selftests/coredump: fix userspace client detection
selftests/coredump: split out coredump socket tests
selftests/coredump: split out common helpers
selftests/pidfd: add second supported_mask test
selftests/pidfd: add first supported_mask test
selftests/pidfd: update pidfd header
pidfs: expose coredump signal
pidfs: drop struct pidfs_exit_info
pidfs: prepare to drop exit_info pointer
pidfd: add a new supported_mask field
pidfs: add missing BUILD_BUG_ON() assert on struct pidfd_info
...
Pull namespace updates from Christian Brauner:
"This contains substantial namespace infrastructure changes including a new
system call, active reference counting, and extensive header cleanups.
The branch depends on the shared kbuild branch for -fms-extensions support.
Features:
- listns() system call
Add a new listns() system call that allows userspace to iterate
through namespaces in the system. This provides a programmatic
interface to discover and inspect namespaces, addressing
longstanding limitations:
Currently, there is no direct way for userspace to enumerate
namespaces. Applications must resort to scanning /proc/*/ns/ across
all processes, which is:
- Inefficient - requires iterating over all processes
- Incomplete - misses namespaces not attached to any running
process but kept alive by file descriptors, bind mounts, or
parent references
- Permission-heavy - requires access to /proc for many processes
- No ordering or ownership information
- No filtering per namespace type
The listns() system call solves these problems:
ssize_t listns(const struct ns_id_req *req, u64 *ns_ids,
size_t nr_ns_ids, unsigned int flags);
struct ns_id_req {
__u32 size;
__u32 spare;
__u64 ns_id;
struct /* listns */ {
__u32 ns_type;
__u32 spare2;
__u64 user_ns_id;
};
};
Features include:
- Pagination support for large namespace sets
- Filtering by namespace type (MNT_NS, NET_NS, USER_NS, etc.)
- Filtering by owning user namespace
- Permission checks respecting namespace isolation
- Active Reference Counting
Introduce an active reference count that tracks namespace
visibility to userspace. A namespace is visible in the following
cases:
- The namespace is in use by a task
- The namespace is persisted through a VFS object (namespace file
descriptor or bind-mount)
- The namespace is a hierarchical type and is the parent of child
namespaces
The active reference count does not regulate lifetime (that's still
done by the normal reference count) - it only regulates visibility
to namespace file handles and listns().
This prevents resurrection of namespaces that are pinned only for
internal kernel reasons (e.g., user namespaces held by
file->f_cred, lazy TLB references on idle CPUs, etc.) which should
not be accessible via (1)-(3).
- Unified Namespace Tree
Introduce a unified tree structure for all namespaces with:
- Fixed IDs assigned to initial namespaces
- Lookup based solely on inode number
- Maintained list of owned namespaces per user namespace
- Simplified rbtree comparison helpers
Cleanups
- Header Reorganization:
- Move namespace types into separate header (ns_common_types.h)
- Decouple nstree from ns_common header
- Move nstree types into separate header
- Switch to new ns_tree_{node,root} structures with helper functions
- Use guards for ns_tree_lock
- Initial Namespace Reference Count Optimization
- Make all reference counts on initial namespaces a nop to avoid
pointless cacheline ping-pong for namespaces that can never go
away
- Drop custom reference count initialization for initial namespaces
- Add NS_COMMON_INIT() macro and use it for all namespaces
- pid: rely on common reference count behavior
- Miscellaneous Cleanups
- Rename exit_task_namespaces() to exit_nsproxy_namespaces()
- Rename is_initial_namespace() and make argument const
- Use boolean to indicate anonymous mount namespace
- Simplify owner list iteration in nstree
- nsfs: raise SB_I_NODEV, SB_I_NOEXEC, and DCACHE_DONTCACHE explicitly
- nsfs: use inode_just_drop()
- pidfs: raise DCACHE_DONTCACHE explicitly
- pidfs: simplify PIDFD_GET__NAMESPACE ioctls
- libfs: allow to specify s_d_flags
- cgroup: add cgroup namespace to tree after owner is set
- nsproxy: fix free_nsproxy() and simplify create_new_namespaces()
Fixes:
- setns(pidfd, ...) race condition
Fix a subtle race when using pidfds with setns(). When the target
task exits after prepare_nsset() but before commit_nsset(), the
namespace's active reference count might have been dropped. If
setns() then installs the namespaces, it would bump the active
reference count from zero without taking the required reference on
the owner namespace, leading to underflow when later decremented.
The fix resurrects the ownership chain if necessary - if the caller
succeeded in grabbing passive references, the setns() should
succeed even if the target task exits or gets reaped.
- Return EFAULT on put_user() error instead of success
- Make sure references are dropped outside of RCU lock (some
namespaces like mount namespace sleep when putting the last
reference)
- Don't skip active reference count initialization for network
namespace
- Add asserts for active refcount underflow
- Add asserts for initial namespace reference counts (both passive
and active)
- ipc: enable is_ns_init_id() assertions
- Fix kernel-doc comments for internal nstree functions
- Selftests
- 15 active reference count tests
- 9 listns() functionality tests
- 7 listns() permission tests
- 12 inactive namespace resurrection tests
- 3 threaded active reference count tests
- commit_creds() active reference tests
- Pagination and stress tests
- EFAULT handling test
- nsid tests fixes"
* tag 'namespace-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (103 commits)
pidfs: simplify PIDFD_GET_<type>_NAMESPACE ioctls
nstree: fix kernel-doc comments for internal functions
nsproxy: fix free_nsproxy() and simplify create_new_namespaces()
selftests/namespaces: fix nsid tests
ns: drop custom reference count initialization for initial namespaces
pid: rely on common reference count behavior
ns: add asserts for initial namespace active reference counts
ns: add asserts for initial namespace reference counts
ns: make all reference counts on initial namespace a nop
ipc: enable is_ns_init_id() assertions
fs: use boolean to indicate anonymous mount namespace
ns: rename is_initial_namespace()
ns: make is_initial_namespace() argument const
nstree: use guards for ns_tree_lock
nstree: simplify owner list iteration
nstree: switch to new structures
nstree: add helper to operate on struct ns_tree_{node,root}
nstree: move nstree types into separate header
nstree: decouple from ns_common header
ns: move namespace types into separate header
...
- In order to prepare the layout for nohz_full work deferral to
user exit, the context tracking state must shrink the counter
of transitions to/from RCU not watching. The only possible hazard
is to trigger wrap-around more easily, delaying a bit grace periods
when that happens. This should be a rare event though. Yet add
debugging and torture code to test that assumption.
- Fix memory leak on locktorture module
- Annotate accesses in rculist_nulls.h to prevent from KCSAN warnings.
On recent discussions, we also concluded that all those WRITE_ONCE()
and READ_ONCE() on list APIs deserve appropriate comments. Something
to be expected for the next cycle.
- Provide a script to apply several configs to several commits with torture.
- Allow torture to reuse a build directory in order to save needless
rebuild time.
- Various cleanups.
test_tc_edt currently defines the target rate in both the userspace and
BPF parts. This value could be defined once in the userspace part if we
make it able to configure the BPF program before starting the test.
Add a target_rate variable in the BPF part, and make the userspace part
set it to the desired rate before attaching the shaping program.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20251128-tc_edt-v2-4-26db48373e73@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
test_tc_edt.sh uses a pair of veth and a BPF program attached to the TX
veth to shape the traffic to 5MBps. It then checks that the amount of
received bytes (at interface level), compared to the TX duration, indeed
matches 5Mbps.
Convert this test script to the test_progs framework:
- keep the double veth setup, isolated in two veths
- run a small tcp server, and connect client to server
- push a pre-configured amount of bytes, and measure how much time has
been needed to push those
- ensure that this rate is in a 2% error margin around the target rate
This two percent value, while being tight, is hopefully large enough to
not make the test too flaky in CI, while also turning it into a small
example of BPF-based shaping.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20251128-tc_edt-v2-2-26db48373e73@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The test_tc_edt BPF program uses a custom section name, which works fine
when manually loading it with tc, but prevents it from being loaded with
libbpf.
Update the program section name to "tc" to be able to manipulate it with
a libbpf-based C test.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20251128-tc_edt-v2-1-26db48373e73@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Jakub reported increased flakiness in bond_macvlan_ipvlan.sh on regular
kernel, while the tests consistently pass on a debug kernel. This suggests
a timing-sensitive issue.
To mitigate this, introduce a short sleep before each xvlan_over_bond
connectivity check. The delay helps ensure neighbor and route cache
have fully converged before verifying connectivity.
The sleep interval is kept minimal since check_connection() is invoked
nearly 100 times during the test.
Fixes: 246af950b9 ("selftests: bonding: add macvlan over bond testing")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20251114082014.750edfad@kernel.org
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20251127143310.47740-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
runqslower was added in commit 9c01546d26 "tools/bpf: Add runqslower
tool to tools/bpf" as a BCC port to showcase early BPF CO-RE + libbpf
workflows. runqslower continues to live in BCC (libbpf-tools), so there
is no need to keep building and maintaining it.
Drop tools/bpf/runqslower and remove all build hooks in tools/bpf and
selftests accordingly.
Signed-off-by: Hoyeon Lee <hoyeon.lee@suse.com>
Link: https://lore.kernel.org/r/20251126093821.373291-1-hoyeon.lee@suse.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
