If the flags in request_irq() is IRQF_TRIGGER_NONE, the trigger method
is determined by "interrupt" property in dts.
So, modify the flag from IRQF_TRIGGER_FALLING to IRQF_TRIGGER_NONE.
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: Yinghua Pan <ot_yinghua.pan@mediatek.com>
Reviewed-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
Not all the SoC are using the same clock divider. Move the divider into
a compat structure specific to the SoCs.
Signed-off-by: Biao Huang <biao.huang@mediatek.com>
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The netdev probe will be used when moving from vDPA to EF100 BAR config.
The netdev remove will be used when moving from EF100 to vDPA BAR config.
In the process, change several log messages to pci_ instead of netif_
to remove the "(unregistered net_device)" text.
Signed-off-by: Jonathan Cooper <jonathan.s.cooper@amd.com>
Co-developed-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Once we separate struct efx_nic memory from net_device memory the
existing usage will have to change.
Apart from the new function efx_netdev_priv() accesses have been
changed using:
sed -i 's/netdev_priv/efx_netdev_priv/'
Signed-off-by: Jonathan Cooper <jonathan.s.cooper@amd.com>
Co-developed-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For VDPA we need to tear down the driver to the point where it
has various control channels like MCDI, but it no longer has
a network device. This adds a state corresponding to
that mode that will be used when VDPA support is added.
Signed-off-by: Jonathan Cooper <jonathan.s.cooper@amd.com>
Co-developed-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch splits the READY state in to NET_UP and NET_DOWN. This
is to prepare for future work to delay resource allocation until
interface up so that we can use resources more efficiently in
SRIOV environments, and also to lay the ground work for an extra
PROBED state where we don't create a network interface,
for VDPA operation.
Signed-off-by: Jonathan Cooper <jonathan.s.cooper@amd.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The previous patches added common APIs for maintaining PGT (Port Group
Table) table. In the legacy model, software did not interact with this
table directly. Instead, it was accessed by firmware in response to
registers such as SFTR and SMID. In the new model, software has full
control over the PGT table using the SMID register.
The configuration of MDB entries is already done via SMID, so the new
PGT APIs can be used also using the legacy model, the only difference is
that MID index should be aligned to bridge model. See a previous patch
which added API for that.
The main changes are:
- MDB code does not maintain bitmap of ports in MDB entry anymore, instead,
it stores a list of ports with additional information.
- MDB code does not configure SMID register directly anymore, it will be
done via PGT API when port is first added or removed.
- Today MDB code does not update SMID when port is added/removed while
multicast is disabled. Instead, it maintains bitmap of ports and once
multicast is enabled, it rewrite the entry to hardware. Using PGT APIs,
the entry will be updated also when multicast is disabled, but the
mapping between {MAC, FID}->{MID} will not appear in SFD register. It
means that SMID will be updated all the time and disable/enable multicast
will impact only SFD configuration.
- For multicast router, today only SMID is updated and the bitmap is not
updated. Using the new list of ports, there is a reference count for each
port, so it can be saved in software also. For such port,
'struct mlxsw_sp_mdb_entry.ports_count' will not be updated and the
port in the list will be marked as 'mrouter'.
- Finally, `struct mlxsw_sp_mid.in_hw` is not needed anymore.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, flushing port from all MDB entries is done when the last VLAN
is removed. This behavior is inaccurate, as port can be removed while there
is another port which uses the same VLAN, in such case, this is not the
last port which uses this VLAN and removed, but this port is supposed to be
removed from the MDB entries.
Flush the port from MDB when it is removed, regardless the state of other
ports. Flush only the MDB entries which are relevant for the same FID
index.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A previous patch added support for init() and fini() for MDB entries. MDB
entry can be updated, ports can be added and removed from the entry. Add
get() and put() functions, the first one checks if the entry already exists
and otherwise initializes the entry. The second removes the entry just in
case that there are no more ports in this entry.
Use the list of the ports which was added in a previous patch. When the
list contains only one port which is not multicast router, and this port
is removed, the MDB entry can be removed. Use
'struct mlxsw_sp_mdb_entry.ports_count' to know how many ports use the
entry, regardless the use of multicast router ports.
When mlxsw_sp_mc_mdb_entry_put() is called with specific port which
supposed to be removed, check if the removal will cause a deletion of
the entry. If this is the case, call mlxsw_sp_mc_mdb_entry_fini() which
first deletes the MDB entry and then releases the PGT entry, to avoid a
temporary situation in which the MDB entry points to an empty PGT entry,
as otherwise packets will be temporarily dropped instead of being flooded.
The new functions will be used in the next patches.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The next patches will convert MDB code to use PGT APIs. The change will
move the responsibility of allocating MID indexes and writing PGT
configurations to hardware to PGT code. As part of this change, most of the
MDB code will be changed and improved.
As a preparation for the above mentioned change, implement
mlxsw_sp_mc_mdb_entry_{init, fini}(). Currently, there is a function
__mlxsw_sp_mc_alloc(), which does not only allocate MID. In addition,
there is no an equivalent function to free the MID. When
mlxsw_sp_port_remove_from_mid() removes the last port, it handles MID
removal. Instead, add init() and fini() functions, which use PGT APIs.
The differences between the existing and the new functions are as follows:
1. Today MDB code does not update SMID when port is added/removed while
multicast is disabled. It maintains a bitmap of ports and once multicast
is enabled, it writes the entry to hardware. Instead, using PGT APIs,
the entry will be updated also when multicast is disabled, but the
mapping between {MAC, FID}->{MID} (is configured using SFD) will be
updated according to multicast state. It means that SMID will be updated
all the time and disable/enable multicast will impact only SFD
configuration.
2. Today the allocation of MID index is done as part of
mlxsw_sp_mc_write_mdb_entry(). The fact that the entry will be
written in hardware all the time, moves the allocation of the index to
be as part of the MDB entry initialization. PGT API is used for the
allocation.
3. Today the update of multicast router ports is done as part of
mlxsw_sp_mc_write_mdb_entry(). Instead, add functions to add/remove
all multicast router ports when entry is first added or removed. When
new multicast router port will be added/removed, the dedicated API will
be used to add/remove it from the existing entries.
4. A list of ports will be stored per MDB entry instead of the exiting
bitmap. The list will contain the multicast router ports and maintain
reference counter per port.
Add mlxsw_sp_mdb_entry_write() which is almost identical to
mlxsw_sp_port_mdb_op(). Use more clear name and align the MID index to
bridge model using PGT API. The existing function will be removed in the
next patches.
Note that PGT APIs configure the firmware using SMID register, like the
driver already does today for MDB entries, so PGT APIs can be used also
using legacy bridge model.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As part of converting MDB code to use PGT APIs, PGT code stores which ports
are mapped to each PGT entry. PGT code is not aware of the type of the port
(multicast router or not), as it is not relevant there.
To be able to release an MDB entry when the there are no ports which are
not multicast routers, the entry should be aware of the state of its
ports. Add support for maintaining list of ports per MDB entry.
Each port will hold a reference count as multiple MDB entries can use the
same hardware MDB entry. It occurs because MDB entries in the Linux bridge
are keyed according to their multicast IP, when these entries are notified
to device drivers via switchdev, the multicast IP is converted to a
multicast MAC. This conversion might cause collisions, for example,
ff0e::1 and ff0e🔢:1 are both mapped to the multicast MAC
33:33:00:00:00:01.
Multicast router port will take a reference once, and will be marked as
'mrouter', then when port in the list is multicast router and its
reference value is one, it means that the entry can be removed in case
that there are no other ports which are not multicast routers. For that,
maintain a counter per MDB entry to count ports in the list, which were
added to the multicast group, and not because they are multicast routers.
When this counter is zero, the entry can be removed.
Add mlxsw_sp_mdb_entry_port_{get,put}() for regular ports and
mlxsw_sp_mdb_entry_mrouter_port_{get,put}() for multicast router ports.
Call PGT API to add or remove port from PGT entry when port is first added
or removed, according to the reference counting.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently MDB entries are stored in a list as part of
'struct mlxsw_sp_bridge_device'. Storing them in a hash table in
addition to the list will allow finding a specific entry more efficiently.
Add support for the required hash table, the next patches will insert
and remove MDB entries from the table. The existing code which adds and
removes entries will be removed and replaced by new code in the next
patches, so there is no point to adjust the existing code.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The next patch will add support for storing all the MDB entries in a hash
table. As a preparation, save the MAC address and the FID in a
separate structure. This structure will be used later as a key for the
hash table.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the list which stores the MDB entries for a given bridge
instance is called 'mids_list'.
This name is not accurate as a MID entry stores a bitmap of ports to
which a packet needs to be replicated and a MDB entry stores the mapping
from {MAC, FID} to PGT index (MID)
Rename it to 'mdb_list'.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the structure which represents MDB entry is called
'struct mlxsw_sp_mid'. This name is not accurate as a MID entry stores a
bitmap of ports to which a packet needs to be replicated and a MDB entry
stores the mapping from {MAC, FID} to PGT index (MID).
Rename the structure to 'struct mlxsw_sp_mdb_entry'. The structure
'mlxsw_sp_mid' is defined as part of spectrum.h. The only file which
uses it is spectrum_switchdev.c, so there is no reason to expose it to
other files. Move the definition to spectrum_switchdev.c.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
FID code reserves about 15K entries in PGT table for flooding. These
entries are just allocated and are not used yet because the code that uses
them is skipped now.
The next patches will convert MDB code to use PGT APIs. The allocation of
indexes for multicast is done after FID code reserves 15K entries.
Currently, legacy bridge model is used and firmware manages PGT table. That
means that the indexes which are allocated using PGT API are too high when
legacy bridge model is used. To not exceed firmware limitation for MDB
entries, add an API that returns the correct 'mid_index', based on bridge
model. For legacy model, subtract the number of flood entries from PGT
index. Use it to write the correct MID to SMID register. This API will be
used also from MDB code in the next patches.
PGT should not be aware of MDB and FID different usage, this API is
temporary and will be removed once unified bridge model will be used.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Just like a similar commit to arch/um/drivers/virt-pci.c, call
virtio_device_ready() to make this driver work after commit
b4ec69d7e09 ("virtio: harden vring IRQ"), since the driver uses
the virtqueues in the probe function. (The virtio core sets
the device ready when probe returns.)
Fixes: 8b4ec69d7e ("virtio: harden vring IRQ")
Fixes: 5d44fe7c98 ("mac80211_hwsim: add frame transmission support over virtio")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20220613210401.327958-1-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
While we are performing a major configuration, there is no point having
the PCS polling timer running. Stop it before we begin preparing for
the configuration change, and restart it only once we've successfully
completed the change.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove the pcs_ops member from struct phylink, using the one stored in
struct phylink_pcs instead.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The PGT (Port Group Table) table maps an index to a bitmap of local ports
to which a packet needs to be replicated. This table is used for layer 2
multicast and flooding.
In the legacy model, software did not interact with PGT table directly.
Instead, it was accessed by firmware in response to registers such as SFTR
and SMID. In the new model, the SFTR register is deprecated and software
has full control over the PGT table using the SMID register.
Use the new PGT APIs to allocate entries for flooding as part of flood
tables initialization. Add mlxsw_sp_fid_flood_tables_fini() to free the
allocated indexes. In addition, use PGT APIs to add/remove ports from PGT
table. The existing code which configures the flood entries via SFTR2 will
be removed later.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The PGT (Port Group Table) table maps an index to a bitmap of local ports
to which a packet needs to be replicated. This table is used for layer 2
multicast and flooding.
The index to PGT table which is called 'mid_index', is a result of
'mid_base' + 'fid_offset'. Using the legacy bridge model, firmware
configures 'mid_base'. However, using the new model, software is
responsible to configure it via SFGC register. The first 15K entries will
be used for flooding and the rest for multicast. The table will look as
follows:
+----------------------------+
| |
| 802.1q, unicast flooding | 4K entries
| |
+----------------------------+
| |
| 802.1q, multicast flooding | 4K entries
| |
+----------------------------+
| |
| 802.1q, broadcast flooding | 4K entries
| |
+----------------------------+
| 802.1d, unicast flooding | 1K entries
+----------------------------+
| 802.1d, multicast flooding | 1K entries
+----------------------------+
| 802.1d, broadcast flooding | 1K entries
+----------------------------+
| |
| |
| Multicast entries | The rest of the table
| |
| |
+----------------------------+
Add 'pgt_base' to 'struct mlxsw_sp_fid_family' and use it to calculate
MID base, set 'SFGC.mid_base' as part of flood tables initialization.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Initialize PGT table as part of mlxsw_sp_init(). This table will be used
first in the next patch by FID code to set flooding entries, and later by
MDB code to add multicast entries.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add an API to associate a PGT entry with SMPE index and add or remove a
port. This API will be used by FID code and MDB code, to add/remove port
from specific PGT entry.
When the first port is added to PGT entry, allocate the entry in the given
MID index, when the last port is removed from PGT entry, free it.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently when bitmap of ports is needed, 'unsigned long *' type is
used. The functions which use the bitmap assume its length according to
its name, i.e., each function which gets a bitmap of ports queries the
maximum number of ports and uses it as the size.
As preparation for the next patch which will use bitmap of ports, add a
dedicated structure for it. Refactor the existing code to use the new
structure.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In Spectrum-1, the index into the MPE table - called switch multicast to
port egress VID (SMPE) - is derived from the PGT entry, whereas in
Spectrum-2 and later ASICs it is derived from the FID.
Therefore, in Spectrum-1, the SMPE index needs to be programmed as part of
the PGT entry via SMID register, while it is reserved for Spectrum-2 and
later ASICs.
Add 'pgt_smpe_index_valid' boolean as part of 'struct mlxsw_sp' and set
it to true for Spectrum-1 and to false for the later ASICs. Add
'smpe_index_valid' as part of 'struct mlxsw_sp_pgt' and set it according
to the value in 'struct mlxsw_sp' as part of PGT initialization.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The PGT (Port Group Table) table maps an index to a bitmap of local ports
to which a packet needs to be replicated. This table is used for layer 2
multicast and flooding.
In the legacy model, software did not interact with this table directly.
Instead, it was accessed by firmware in response to registers such as
SFTR and SMID. In the new model, the SFTR register is deprecated and
software has full control over the PGT table using the SMID register.
The entire state of the PGT table needs to be maintained in software
because member ports in a PGT entry needs to be reference counted to avoid
releasing entries which are still in use.
Add the following APIs:
1. mlxsw_sp_pgt_{init, fini}() - allocate/free the PGT table.
2. mlxsw_sp_pgt_mid_alloc_range() - allocate a range of MID indexes in PGT.
To be used by FID code during initialization to reserve specific PGT
indexes for flooding entries.
3. mlxsw_sp_pgt_mid_free_range() - free indexes in a given range.
4. mlxsw_sp_pgt_mid_alloc() - allocate one MID index in the PGT at a
non-specific range, just search for free index. To be used by MDB code.
5. mlxsw_sp_pgt_mid_free() - free the given index.
Note that alloc() functions do not allocate the entries in software, just
allocate IDs using 'idr'.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The device includes two main tables to support layer 2 multicast (i.e.,
MDB and flooding). These are the PGT (Port Group Table) table and the MPE
(Multicast Port Egress) table.
- PGT is {MID -> (bitmap of local_port, SPME index)}
- MPE is {(Local port, SMPE index) -> eVID}
In the legacy model, software did not interact with MPE table as it was
completely hidden in firmware. In the new model, software needs to
populate the table itself in order to map from {Local port, SMPE} to an
egress VID. This is done using the SMPE register.
Configure SMPE register when a {Local port, VID} are mapped/unmapped to a
802.1d and 802.1q emulated FIDs. The MPE table is not relevant for rFIDs as
firmware handles their flooding.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In the unified bridge model, the bridge type FID attribute is no longer
configured by the firmware, but instead by software when creating and
editing a FID via SFMR register.
Set this field as part of FID creation and edition flow. Default to 0
(reserved) as long as the driver operates in the legacy bridge model.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, 'bridge_type' is an attribute of 'struct mlxsw_sp_flood_table',
which is defined per FID family. Instead, it can be an attribute of
'struct mlxsw_sp_fid_family' as all flood tables in the same family are of
the same type. This change will ease the configuration of
'SFMR.flood_bridge_type' which will be added in the next patch.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Under the legacy bridge model, the field 'bridge_type' is used only
in SFGC register, to determine the type of flood table (FID/FID offset).
Under the unified bridge model, it will be used also in SFMR register.
When a BUM packet needs to be flooded, SFGC is used to provide the
'mid_base' for PGT table. The access to SFGC is by
{packet type, bridge type}. Under the unified bridge model, software is
responsible for configuring 'bridge_type' as part of SFMR.
As preparation for the new required configuration, rename
'enum mlxsw_reg_sfgc_bridge_type' to 'enum mlxsw_reg_bridge_type'. Then
it can be used also in SFMR. In addition, align the names of the values to
internal documentation.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Using unified bridge model, RITR register no longer configures the rFID
used for sub-port RIFs. It needs to be created by software via SFMR. Such
FIDs need to be created with a special flood indication using
'SFMR.flood_rsp=1'. It means that for such FIDs, router sub-port flooding
table will be used, this table is configured by firmware.
Set the above mentioned field as part of FID initialization and FID
edition, so then when other fields will be updated in SFMR, this field
will store the correct value and will not be overwritten.
Add 'flood_rsp' variable to 'struct mlxsw_sp_fid_family', set it to true
for rFID and to false for the rest.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As part of transition to unified bridge model, many different firmware
configurations are done.
Some of the configuration that needs to be done for the unified bridge
model is not valid under the legacy model, and would be rejected by the
firmware. At the same time, the driver cannot switch to the unified bridge
model until all of the code has been converted.
To allow breaking the change into patches, and to not break driver
behavior during the transition, add a boolean variable to indicate bridge
model. Then, forbidden configurations will be skipped using the check -
"if (!mlxsw_sp->ubridge)".
The new variable is temporary for several sets, it will be removed when
firmware will be configured to work with unified bridge model.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
'vlan_bitmap' is a bitmap and is used as such. So allocate it with
devm_bitmap_zalloc() and its explicit bit size (i.e. VLAN_N_VID).
This avoids the need of the VLAN_BITMAP_SIZE macro which:
- needlessly has a 'nic_dev' parameter
- should be "long" (and not byte) aligned, so that the bitmap semantic
is respected
This is in fact not an issue because VLAN_N_VID is 4096 at the time
being, but devm_bitmap_zalloc() is less verbose and easier to understand.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/6ff7b7d21414240794a77dc2456914412718a145.1656260842.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for ethtool selftest.
e.g.
# ethtool -t DEVNAME
test result like:
The test result is PASS
The test extra info:
Link Test 0
NSP Test 0
Firmware Test 0
Register Test 0
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for VEPA mode of HW bridge.
The default remains VEB mode.
The mode may be configured using ndo_bridge_setlink,
and inspected using ndo_bridge_getlink.
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If cable is attached after probe sequence, the usbnet framework would
not automatically start processing RX packets except at least one
packet was transmitted.
On systems with any kind of address auto configuration this issue was
not detected, because some packets are send immediately after link state
is changed to "running".
With this patch we will notify usbnet about link status change provided by the
PHYlib.
Fixes: e532a096be ("net: usb: asix: ax88772: add phylib support")
Reported-by: Anton Lundin <glance@acc.umu.se>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Tested-by: Anton Lundin <glance@acc.umu.se>
Link: https://lore.kernel.org/r/20220624075139.3139300-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
