Introduce support for the page_pool stats API into mtk_eth_soc driver.
Report page_pool stats through ethtool.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce XDP support for XDP_TX verdict and ndo_xdp_xmit function
pointer.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce basic XDP support to mtk_eth_soc driver.
Supported XDP verdicts:
- XDP_PASS
- XDP_DROP
- XDP_REDIRECT
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rely on page_pool allocator for single page buffers in order to keep
them dma mapped and add skb recycling support.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
100GbE Intel Wired LAN Driver Updates 2022-07-21
This series contains updates to ice driver only.
Karol adds implementation for GNSS write; data is written to the GNSS
module through TTY device using u-blox UBX protocol.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: add write functionality for GNSS TTY
ice: add i2c write command
====================
Link: https://lore.kernel.org/r/20220721202842.3276257-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Check if wol is supported on reset instead of everytime get_wol
is called.
- Save wolopts in private data instead of relying on the HW to save it.
- Defer enabling WoL until suspend instead of enabling it everytime
set_wol is called.
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We need more space to save WoL context. So lets allocate memory
for ax88179_data instead of using struct usbnet data field which
only supports 5 words. We continue to use the struct usbnet data
field for multicast filters. However since we no longer have the
private data stored there, we can shift it to the beginning.
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The hardware state was only partially restored, which meant certain
functionality was broken on resume. Do a full HW reset on resume to
fix this.
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of passing in_pm flags all over the place, use the private
struct to handle in_pm mode.
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bind and reset are basically doing the same thing. Remove the duplicate
code and have bind call into reset.
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For wmediumd/virtio, handle both the RX channel for links,
as well as the link addresses when links are added/removed.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are two issues here: we need to do the translation
even in case mac80211 selected a link, and we should only
translate the A3 if it's the BSSID. Fix both.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since representors piggy-back on the PF's queues for TX, they can
only accept new TXes while the PF is up. Thus, any operation which
detaches the PF must first detach all its VFreps.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement .ndo_start_xmit() by calling into the parent PF's TX path.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A non-null efv in __ef100_enqueue_skb() indicates that the packet is
from that representor, should be transmitted with a suitable option
descriptor (to instruct the switch to deliver it to the representee),
and should not be accounted to the parent PF's stats or BQL.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
An MAE port, or m-port, is a port (source/destination for traffic) on
the Match-Action Engine (the internal switch on EF100).
Representors will use their representee's m-port for two purposes: as
a destination override on TX from the representor, and as a source
match in 'default rules' to steer representee traffic (when not
matched by e.g. a TC flower rule) to representor RX via the parent
PF's receive queue.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
No net_device_ops yet, just a placeholder netdev created per VF.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
One PCIe function per network port (more precisely, per m-port group) is
responsible for configuring the Match-Action Engine which performs
switching and packet modification in the slice to support flower/OVS
offload. The GRP_MAE bit in the privilege mask indicates whether a
given function has this capability.
At probe time, call MCDIs to read the calling function's privilege mask,
and store the GRP_MAE bit in a new ef100_nic_data member.
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The open code which is netif_is_bridge_port() || netif_is_ovs_port() is
defined as a new helper function on netdev.h like netif_is_any_bridge_port
that can check both IFF flags in 1 go. So use netif_is_any_bridge_port()
function instead of open code. This patch doesn't change logic.
Signed-off-by: Juhee Kang <claudiajkang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The open code which is netif_is_bridge_port() || netif_is_ovs_port() is
defined as a new helper function on netdev.h like netif_is_any_bridge_port
that can check both IFF flags in 1 go. So use netif_is_any_bridge_port()
function instead of open code. This patch doesn't change logic.
Signed-off-by: Juhee Kang <claudiajkang@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While phylink_pcs_ops :: pcs_get_state does return void, xpcs_get_state()
does check for a non-zero return code from xpcs_get_state_c37_sgmii()
and prints that as a message to the kernel log.
However, a non-zero return code from xpcs_read() is translated into
"return false" (i.e. zero as int) and the I/O error is therefore not
printed. Fix that.
Fixes: b97b5331b8 ("net: pcs: add C37 SGMII AN support for intel mGbE controller")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220720112057.3504398-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marc Kleine-Budde says:
====================
can-next 2022-07-21
The patch is by Vincent Mailhol and fixes a use on an uninitialized
variable in the pch_can driver (introduced in last pull request to
net-next).
* tag 'linux-can-next-for-5.20-20220721' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: pch_can: pch_can_error(): initialize errc before using it
====================
Link: https://lore.kernel.org/r/20220721163042.3448384-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit 2c7b9b936b ("net: ipa: move configuration data files
into a subdirectory"), build of the ipa driver fails with the
following error:
drivers/net/ipa/data/ipa_data-v3.1.c:9:10: fatal error: gsi.h: No such file or directory
After the mentioned commit, all the file included by the configuration
are in the parent directory. Fix the issue updating the include path.
Fixes: 2c7b9b936b ("net: ipa: move configuration data files into a subdirectory")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/7105112c38cfe0642a2d9e1779bf784a7aa63d16.1658411666.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the possibility to write raw bytes to the GNSS module through the
first TTY device. This allows user to configure the module.
Create a second read-only TTY device.
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add the possibility to write to connected i2c devices using the AQ
command. FW may reject the write if the device is not on allowlist.
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
After commit 3a5c7e4611, the variable errc is accessed before being
initialized, c.f. below W=2 warning:
| In function 'pch_can_error',
| inlined from 'pch_can_poll' at drivers/net/can/pch_can.c:739:4:
| drivers/net/can/pch_can.c:501:29: warning: 'errc' may be used uninitialized [-Wmaybe-uninitialized]
| 501 | cf->data[6] = errc & PCH_TEC;
| | ^
| drivers/net/can/pch_can.c: In function 'pch_can_poll':
| drivers/net/can/pch_can.c:484:13: note: 'errc' was declared here
| 484 | u32 errc, lec;
| | ^~~~
Moving errc initialization up solves this issue.
Fixes: 3a5c7e4611 ("can: pch_can: do not report txerr and rxerr during bus-off")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/all/20220721160032.9348-1-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Reduce the clutter in the main IPA source directory by creating a
new "data" subdirectory, and locating all of the configuration data
files in there.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Create a variable in the Makefile listing the IPA versions supported
by the driver. Use that to create the list of configuration data
object files used (rather than listing them all individually).
Add a SPDX license comment.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 8797972aff ("net: ipa: remove command info pool"),
we don't allocate "command info" entries for command channel
transactions. Fix a comment that seems to suggest we still do.
(Even before that commit, the comment was out of place.)
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the IPA driver has completed its initialization and setup
stages, it emits a brief message to the log. Add a small message
that reports when it has been removed.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In gsi_trans_free(), there's no point in ipa_gsi_trans_release() if
a transaction is unused. No used TREs means no IPA layer resources
to clean up. So only call ipa_gsi_trans_release() if at least one
TRE was used.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The transaction map is really associated with the transaction pool;
move its definition earlier in the gsi_trans_info structure.
Rearrange initialization in gsi_channel_trans_init() so it
sets the tre_avail value first, then initializes the transaction
pool, and finally allocating the transaction map.
Update comments.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We currently put a transaction on the pending list when it has
been committed. But until the channel's doorbell rings, these
transactions aren't actually "owned" by the hardware yet.
Add a new "committed" state (and list), to represent transactions
that have been committed but not yet sent to hardware. Define
"pending" to mean committed transactions that have been sent
to hardware but have not yet completed.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Create a new attribute group meant to provide a single place that
defines endpoint IDs that might be needed by user space. Not all
defined endpoints are presented, and only those that are defined
will be made visible.
The new attributes use "extended" device attributes to hold endpoint
IDs, which is a little more compact and efficient. Reimplement the
existing modem endpoint ID attribute files using common code.
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20220719191639.373249-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Saeed Mahameed says:
====================
mlx5-updates-2022-07-17
1) Add resiliency for lost completions for PTP TX port timestamp
2) Report Header-data split state via ethtool
3) Decouple HTB code from main regular TX code
* tag 'mlx5-updates-2022-07-17' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: CT: Remove warning of ignore_flow_level support for non PF
net/mlx5e: Add resiliency for PTP TX port timestamp
net/mlx5: Expose ts_cqe_metadata_size2wqe_counter
net/mlx5e: HTB, move htb functions to a new file
net/mlx5e: HTB, change functions name to follow convention
net/mlx5e: HTB, remove priv from htb function calls
net/mlx5e: HTB, hide and dynamically allocate mlx5e_htb structure
net/mlx5e: HTB, move stats and max_sqs to priv
net/mlx5e: HTB, move section comment to the right place
net/mlx5e: HTB, move ids to selq_params struct
net/mlx5e: HTB, reduce visibility of htb functions
net/mlx5e: Fix mqprio_rl handling on devlink reload
net/mlx5e: Report header-data split state through ethtool
====================
Link: https://lore.kernel.org/r/20220719203529.51151-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marc Kleine-Budde says:
====================
this is a pull request of 2 patches for net/master.
The first patch is by me and fixes the detection of the mcp251863 in
the mcp251xfd driver.
The last patch is by Liang He and adds a missing of_node_put() in the
rcar_canfd driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When a GSI channel is initially allocated, and after it has been
reset, the hardware assumes its ring index is 0. And although we
do initialize channels this way, the comments in the IPA code don't
really explain this. For event rings, it doesn't matter what value
we use initially, so using 0 is just fine.
Add some information about the assumptions made by hardware above
the definition of the gsi_ring structure in "gsi.h".
Zero the index field for all rings (channel and event) when the ring
is allocated. As a result, that function initializes all fields in
the structure.
Stop zeroing the index the top of gsi_channel_program(). Initially
we'll use the index value set when the channel ring was allocated.
And we'll explicitly zero the index value in gsi_channel_reset()
before programming the hardware, adding a comment explaining why
it's required.
For event rings, use the index initialized by gsi_ring_alloc()
rather than 0 when ringing the doorbell in gsi_evt_ring_program().
(It'll still be zero, but we won't assume that to be the case.)
Use a local variable in gsi_evt_ring_program() that represents the
address of the event ring's ring structure.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
mlxsw needs to distinguish nexthops with a gateway from connected
nexthops in order to write the former to the adjacency table of the
device. The check used to rely on the fact that nexthops with a gateway
have a 'link' scope whereas connected nexthops have a 'host' scope. This
is no longer correct after commit 747c143072 ("ip: fix dflt addr
selection for connected nexthop").
Fix that by instead checking the address family of the gateway IP. This
is a more direct way and also consistent with the IPv6 counterpart in
mlxsw_sp_rt6_is_gateway().
Cc: stable@vger.kernel.org
Fixes: 747c143072 ("ip: fix dflt addr selection for connected nexthop")
Fixes: 597cfe4fc3 ("nexthop: Add support for IPv4 nexthops")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
