Krzysztof Halasa has kept the cns3xxx platform working for a long time
but has moved away from working on it. The OpenWRT port was dropped in
2020, and support for the Gateworks Laguna platform never made it into
the mainline kernel, which only supports the reference design.
Further, the ARM11MPCore has an unresolved issue with instruction cache
coherency, and removing support for the remaining platforms using this
core would be the easiest solution.
Mark the entire platform as unused now, to be removed in early 2023 if
no users show up.
Cc: Krzysztof Halasa <khalasa@piap.pl>
Link: https://lore.kernel.org/lkml/20210616152326.GG22278@shell.armlinux.org.uk/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The iop32x platform has recently been converted to be part of
the multiplatform configuration, and it should be possible to
keep it alive for longer by making it boot from devicetree like
we did for the related ixp4xx platform.
However, it appears that no users remain at this point, so just
mark the entire platform depending on CONFIG_UNUSED_BOARD_FILES,
with the intention of removing it in early 2023.
If any users remain, please speak up now.
Cc: Lennert Buytenhek <buytenh@wantstofly.org>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The s3c24xx platform is already scheduled for removal in early 2023,
with s3c64xx meeting the same fate a year later.
Most of the s3c64xx board files appear to be unused, as the better
maintained ones already got converted to DT. The main exception is
the Wolfson Cragganmore board, which remains in use as the reference
design for Wolfson/Cirrus devices. As the other boards get removed,
this one stays around along with the DT based machines.
The s3c6400_defconfig file now disables the unused boards, while the
s3c24xx defconfig files all turn on CONFIG_UNUSED_BOARD_FILES to
remain usable.
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Legacy board files with no known users are planned to get removed in
early 2023, and this covers the majority of the omap1 boards as well.
According to Tony, the actual users are all on OSK, Nokia770, and
AMS-Delta. Additionally, the sx1 and palmte boards are supported by qemu,
which is convenient for testing, so all five stay around past the initial
board removal.
As omap1 is now part of the multiplatform build and uses the common-clk
framework, it has become easier to convert these to use devicetree
based booting in the future.
Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: linux-omap@vger.kernel.org
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Most Arm board files are unused and will be removed in early
2023 if no remaining users show up. For the sa1100 platform,
the machines that are still in use are:
- Russell's Assabet development board
- Linus' H3600 iPaq PocketPC
- Collie as the only qemu-supported board, to allow
testing by others
All remaining sa1100 boards are marked to depend on
CONFIG_UNUSED_BOARD_FILES to give potential users a
last chance to speak up.
Cc: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There are three remaining footbridge boards, as the CO285 and the HP
personal server got removed already over the years.
Russell still uses his ebsa285, while both Linus and Marc have a NetWinder
that they use for testing. Nobody so far replied that they are using cats,
so it goes on the long list of machines to be removed in early 2023 if
it stays like this.
Cc: Russell King <linux@armlinux.org.uk>
Cc: Linus Walleij <linusw@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The mmp platform supports both ATAGS based board files and DT
booting, but it appears that nobody has been interested in
board files for a long time.
Mark all of them for removal in early 2023 with a dependency
on CONFIG_UNUSED_BOARD_FILES, leaving only the DT support
for the future, unless someone pops up who uses them.
Cc: Lubomir Rintel <lkundrak@v3.sk>
Cc: Haojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Most of the remaining ARM board files in the kernel have no known users,
and we plan to remove those in early 2023.
For ep93xx, Alexander Sverdlin still has access to the edb93xx family
of reference boards, while Nikita Shubin has a ts7250 and is working on
a device tree conversion for those. Hartley Sweeten has a
MACH_VISION_EP9307 that is still in use.
This is a total of nine machine definitions that we will keep
around, but these are all similar machines and are defined in only
two board files. The other six board files now have a dependency on
CONFIG_UNUSED_BOARD_FILES to indicate that they are likely going away.
Cc: Nikita Shubin <nikita.shubin@maquefel.me>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Cc: Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
From an earlier discussion, it appears that the davinci da8xx machines
that are still functional have already been converted to DT, while the
remaining board files are only kept because nobody has stepped up to
remove them.
Mark all these boards as 'depends on UNUSED_BOARD_FILES' with the
plan to remove them in early 2023 after the next longterm supported
kernel is out.
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Most of the remaining arm board files in the kernel are unused and will be
removed in early 2023 if no users step up. So far I got no user replies
about the orion5x and mv78xx0 machines, but these are still supported
in the default kernel of the Debian 'armel' (armv5 softfloat) distro,
and there is an active project on github that tries to keep some of
these machines working, and Mauri Sandberg is working on a DT conversion
for the D-Link DNS-323.
It appears the Debian-on-Buffalo project has not got the Terastation WXL
working in a few years, and the other mv78xx0 machines are just the
reference designs, so I assume none of these have remaining users.
For the Orion5x family, the same is probably true for its reference
implementations (RD88Fxxxxx, DB88F281) and the machines with less than
64MB of memory (WNR854T, WRT350N v2).
The remaining nine machines are now scheduled to be kept for at least
2023, hopefully to be replaced with DT based versions.
The mv78xx0_defconfig file needs to enable CONFIG_UNUSED_BOARD_FILES
to still build, while the other affected defconfig files lose the
specific boards.
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Gregory Clement <gregory.clement@bootlin.com>
Cc: Mauri Sandberg <maukka@ext.kapsi.fi>
Link: https://github.com/1000001101000/Debian_on_Buffalo
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Most of the traditional board files are no longer used by anyone and
will be removed next year, while the DT based machine support remains.
Adding a CONFIG_ATAGS dependency around all the board files means
that they now actaully get disabled when ATAGS support is left out,
and the individual boards that have no known users are marked
as depending on CONFIG_UNUSED_BOARD_FILES, with the plan to remove
them in early 2023 unless someone else shows interest.
Laurence de Bruxelles intends to work on converting the Spitz/Akita/Borzoi
family of Sharp Zaurus SL machines to DT, to make that easier those
remain for the moment.
In addition, the "Gumstix" machine is the one that is supported in
qemu with 256MB of RAM, which makes it particularly nice for testing,
I'm leaving it in hoping that someone can take care of converting it to
DT as well.
Finally, Marc Zyngier is still able to test the Zeus and Viper machines,
so these could be saved as well if anyone wants to conver them to DT.
This seems less likely, so I'm marking them as unused for the time being.
For the defconfig files, both the pxa3xx_defconfig and pxa_defconfig
now only enable the boards that are not marked as unused, while all the
other ones explicitly enable CONFIG_UNUSED_BOARD_FILES to still allow
building the kernels.
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Daniel Mack <daniel@zonque.org>
Cc: Laurence de Bruxelles <lfdebrux@gmail.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There are a total of eight platforms that only suppor ATAGS based boot
with board files but no devicetree booting.
For dove, the DT support is part of the mvebu platform, which shares
driver but no code in arch/arm.
Most of these will never get converted to DT, and the majority of the
board files appear to be entirely unused already. There are still known
users on a few machines, and there may be interest in converting some
omap1, ep93xx or footbridge machines over in the future.
For the moment, just add a Kconfig dependency to hide these platforms
completely when CONFIG_ATAGS is disabled, and reorder the priority
of the options: Rather than offering to turn ATAGS off for platforms
that have DT support, make it a top-level setting that determines
which platforms are visible.
The s3c24xx platform supports one machine with DT support, but it
cannot be built without also including ATAGS support, and the
entire platform is scheduled for removal, so leaving the entire
platform behind a dependency seems good enough.
All defconfig files should keep working, as the option remains default
enabled.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
CONFIG_LEDS was replaced by CONFIG_NEW_LEDS over ten years ago with commit
fa8bbb13ab ("ARM: use new LEDS CPU trigger stub to replace old one"),
but some defconfig files still reference it.
Replace it and its sub-options with the corresponding new versions.
Some of these machines may not actually have a new-style LED driver,
and I did not check them individually as most of the machines are
going away soon anyway.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Since commit 1515b186c2 ("ARM: make configuration of userspace
Thumb support an expert option"), CONFIG_THUMB cannot be disabled
unless one turns on CONFIG_EXPERT first.
This is probably for the better, so remove the statements that
turn it off.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
CONFIG_DEBUG_INFO is now implicitly selected if one picks one of the
explicit options that could be DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT,
DEBUG_INFO_DWARF4, DEBUG_INFO_DWARF5.
This was actually not what I had in mind when I suggested making
it a 'choice' statement, but it's too late to change again now,
and the Kconfig logic is more sensible in the new form.
Change any defconfig file that had CONFIG_DEBUG_INFO enabled
but did not pick DWARF4 or DWARF5 explicitly to now pick the toolchain
default.
Fixes: f9b3cd2457 ("Kconfig.debug: make DEBUG_INFO selectable from a choice")
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The default is always 0x0 after commit 39c3e30456 ("ARM: 8984/1:
Kconfig: set default ZBOOT_ROM_TEXT/BSS value to 0x0"), so any
defconfig file that has these two lines can now drop them to reduce
the diff against the 'make savedefconfig' version.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A couple of ARM defconfig files (and one for sh) still refer to the
IRDA options that were removed in linux-4.14. Remove the entries
as well now.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A lot of Kconfig options have changed over the years, and we tend
to not do a blind 'make defconfig' to refresh the files, to ensure
we catch options that should not have gone away.
I used some a bit of scripting to only rework the bits where an
option moved around in any of the defconfig files, without also
dropping any of the other lines, to make it clearer which options
we no longer have.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
More Qualcomm driver changes for v5.20
This adds support for booting secondary cores, SPM, SMD-RPM and RPM
power-domain support for the MSM8909 platform.
It drops an unnecessary print in icc-bwmon, corrects SA8540P entries in
socinfo and a Kconfig build dependency for QCOM_RPMPD.
Lastly it continues to clean up up the Devicetree bindings for the
Qualcomm drivers.
* tag 'qcom-drivers-for-5.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
dt-bindings: soc: qcom: qcom,smd-rpm: add power-controller
dt-bindings: soc: qcom: aoss: document qcom,sm8450-aoss-qmp
dt-bindings: soc: qcom,rpmh-rsc: simplify qcom,tcs-config
ARM: mach-qcom: Add support for MSM8909
dt-bindings: arm: cpus: Document "qcom,msm8909-smp" enable-method
soc: qcom: spm: Add CPU data for MSM8909
dt-bindings: soc: qcom: spm: Add MSM8909 CPU compatible
soc: qcom: rpmpd: Add compatible for MSM8909
dt-bindings: power: qcom-rpmpd: Add MSM8909 power domains
soc: qcom: smd-rpm: Add compatible for MSM8909
dt-bindings: soc: qcom: smd-rpm: Add MSM8909
soc: qcom: icc-bwmon: Remove unnecessary print function dev_err()
soc: qcom: socinfo: Fix the id of SA8540P SoC
soc: qcom: Make QCOM_RPMPD depend on PM
Link: https://lore.kernel.org/r/20220720230648.2113609-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
AT91 SoC for 5.20
It contains updates for integration with OP-TEE by having a
dummy outer_cache.write_sec function to avoid triggering
exception when Linux tries to update secure registers.
* tag 'at91-soc-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: at91: setup outer cache .write_sec() callback if needed
ARM: at91: add sam_linux_is_optee_available() function
Link: https://lore.kernel.org/r/20220721085852.1740924-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
AT91 fixes for 5.19 #3
It contains one fix for LAN966 based SoCs fixing the frequency of
sys_clk. sys_clk is feeding different IPs so having proper frequency
for it in DT is necessary for proper working of different drivers.
* tag 'at91-fixes-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: lan966x: fix sys_clk frequency
Link: https://lore.kernel.org/r/20220721075705.1739915-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
When running under OP-TEE, the L2 cache is configured by OP-TEE and the
sam platform code does not allow any modification yet. Setup a dummy
.write_sec() callback to avoid triggering exceptions when Linux tries
to modify the L2 cache configuration.
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
[claudiu.beznea: keep .init_early populated only for SAMA5D2, remove
sam_secure_init() from sama5d2_init() as it is also called in
sama5_secure_cache_init()]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220606145701.185552-3-clement.leger@bootlin.com
Merge the new SoC support from Tomer Maimon:
"This patchset adds initial support for the Nuvoton
Arbel NPCM8XX Board Management controller (BMC) SoC family.
The Nuvoton Arbel NPCM8XX SoC is a fourth-generation BMC.
The NPCM8XX computing subsystem comprises a quadcore ARM
Cortex A35 ARM-V8 architecture.
This patchset adds minimal architecture and drivers such as:
Clocksource, Clock, Reset, and WD.
Some of the Arbel NPCM8XX peripherals are based on Poleg NPCM7XX.
This patchset was tested on the Arbel NPCM8XX evaluation board."
I'm leaving out the clk controller driver, which is still under
review.
* nuvoton/newsoc:
arm64: defconfig: Add Nuvoton NPCM family support
arm64: dts: nuvoton: Add initial NPCM845 EVB device tree
arm64: dts: nuvoton: Add initial NPCM8XX device tree
arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC
dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string
dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string
dt-bindings: arm: npcm: Add maintainer
reset: npcm: Add NPCM8XX support
dt-bindings: reset: npcm: Add support for NPCM8XX
reset: npcm: using syscon instead of device data
ARM: dts: nuvoton: add reset syscon property
dt-bindings: reset: npcm: add GCR syscon property
dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock
dt-bindings: watchdog: npcm: Add npcm845 compatible string
dt-bindings: timer: npcm: Add npcm845 compatible string
Add nuvoton,sysgcr syscon property to the reset node to handle the general
control registers.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
mvebu dt for 5.20 (part 1)
Enable LED to link/activity on turris-omnia (Armada 385 based)
* tag 'mvebu-dt-5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
ARM: dts: turris-omnia: enable LED controller node
ARM: dts: turris-omnia: configure LED[0] pin function to link/activity
Link: https://lore.kernel.org/r/87lespqn28.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
mvebu arm for 5.20 (part 1)
Update PCIe fixup for old Marvell SoCs: dove, orion5 and mv78xx0.
* tag 'mvebu-arm-5.20-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
ARM: Marvell: Update PCIe fixup
Link: https://lore.kernel.org/r/87ilntqn0v.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
When RDRAND was introduced, there was much discussion on whether it
should be trusted and how the kernel should handle that. Initially, two
mechanisms cropped up, CONFIG_ARCH_RANDOM, a compile time switch, and
"nordrand", a boot-time switch.
Later the thinking evolved. With a properly designed RNG, using RDRAND
values alone won't harm anything, even if the outputs are malicious.
Rather, the issue is whether those values are being *trusted* to be good
or not. And so a new set of options were introduced as the real
ones that people use -- CONFIG_RANDOM_TRUST_CPU and "random.trust_cpu".
With these options, RDRAND is used, but it's not always credited. So in
the worst case, it does nothing, and in the best case, maybe it helps.
Along the way, CONFIG_ARCH_RANDOM's meaning got sort of pulled into the
center and became something certain platforms force-select.
The old options don't really help with much, and it's a bit odd to have
special handling for these instructions when the kernel can deal fine
with the existence or untrusted existence or broken existence or
non-existence of that CPU capability.
Simplify the situation by removing CONFIG_ARCH_RANDOM and using the
ordinary asm-generic fallback pattern instead, keeping the two options
that are actually used. For now it leaves "nordrand" for now, as the
removal of that will take a different route.
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
The marvell PHY driver changes the LED[0] pin function to "On - 1000
Mbps Link, Off - Else".
Turris Omnia expects that the function is "On - Link, Blink - Activity,
Off - No link".
Use the `marvell,reg-init` DT property to change the function.
In the future, once netdev trigger will support HW offloading, we will
be able to have this configured via the combination of PHY driver and
leds-turris-omnia driver.
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
- The code relies on rc_pci_fixup being called, which only happens
when CONFIG_PCI_QUIRKS is enabled, so add that to Kconfig. Omitting
this causes a booting failure with a non-obvious cause.
- Update rc_pci_fixup to set the class properly, copying the
more modern style from other places
- Correct the rc_pci_fixup comment
This patch just re-applies commit 1dc831bf53 ("ARM: Kirkwood: Update
PCI-E fixup") for all other Marvell ARM platforms which have same buggy
PCIe controller and do not use pci-mvebu.c controller driver yet.
Long-term goal for these Marvell ARM platforms should be conversion to
pci-mvebu.c controller driver and removal of these fixups in arch code.
Signed-off-by: Pali Rohár <pali@kernel.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: stable@vger.kernel.org
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The sys_clk frequency is 165.625MHz. The register reference of the
Generic Clock controller lists the CPU clock as 600MHz, the DDR clock as
300MHz and the SYS clock as 162.5MHz. This is wrong. It was first
noticed during the fan driver development and it was measured and
verified via the CLK_MON output of the SoC which can be configured to
output sys_clk/64.
The core PLL settings (which drives the SYS clock) seems to be as
follows:
DIVF = 52
DIVQ = 3
DIVR = 1
With a refernce clock of 25MHz, this means we have a post divider clock
Fpfd = Fref / (DIVR + 1) = 25MHz / (1 + 1) = 12.5MHz
The resulting VCO frequency is then
Fvco = Fpfd * (DIVF + 1) * 2 = 12.5MHz * (52 + 1) * 2 = 1325MHz
And the output frequency is
Fout = Fvco / 2^DIVQ = 1325MHz / 2^3 = 165.625Mhz
This all adds up to the constrains of the PLL:
10MHz <= Fpfd <= 200MHz
20MHz <= Fout <= 1000MHz
1000MHz <= Fvco <= 2000MHz
Fixes: 290deaa10c ("ARM: dts: add DT for lan966 SoC and 2-port board pcb8291")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220326194028.2945985-1-michael@walle.cc
The remoteproc configuration in qcom-msm8974.dtsi is incomplete because
it lacks the regulator supplies that should be added in the board DT
files. Some of the msm8974 boards are currently missing the regulator
supplies and should have the remoteprocs disabled to avoid making use
of the incomplete configuration.
This also fixes dtbs_check warnings after moving "qcom,msm8974-mss-pil"
to DT schema, which rightfully complains that the -supply properties
are missing for some boards:
qcom-apq8074-dragonboard.dtb:
remoteproc@fc880000: 'pll-supply' is a required property
From schema: remoteproc/qcom,msm8916-mss-pil.yaml
remoteproc@fc880000: 'mss-supply' is a required property
From schema: remoteproc/qcom,msm8916-mss-pil.yaml
remoteproc@fc880000: 'oneOf' conditional failed, one must be fixed:
'power-domains' is a required property
'power-domain-names' is a required property, or
'cx-supply' is a required property
'mx-supply' is a required property
Cc: Luca Weiss <luca@z3ntu.xyz>
Cc: Konrad Dybcio <konrad.dybcio@somainline.org>
Fixes: f300826d27 ("ARM: dts: qcom-msm8974: Sort and clean up nodes")
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220712124421.3129206-4-stephan.gerhold@kernkonzept.com
