Add device tree binding support for the USB3.2 Gen2 controller on Renesas
RZ/V2H(P) and RZ/V2N SoCs. The USB3.2 IP on these SoCs is identical to
that found on the RZ/G3E SoC.
Add new compatible strings "renesas,r9a09g056-xhci" for RZ/V2N and
"renesas,r9a09g057-xhci" for RZ/V2H(P). Both variants use
"renesas,r9a09g047-xhci" as a fallback compatible to indicate hardware
compatibility with the RZ/G3E implementation.
Update the title to be more generic as it now covers multiple SoC
families beyond just RZ/G3E.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251101042440.648321-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for reported issues.
Included in here are:
- sh-sci serial driver fixes
- 8250_dw and _mtk driver fixes
- sc16is7xx driver bugfix
- new 8250_exar device ids added
All of these have been in linux-next this past week with no reported
issues"
* tag 'tty-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250_mtk: Enable baud clock and manage in runtime PM
serial: 8250_dw: handle reset control deassert error
dt-bindings: serial: sh-sci: Fix r8a78000 interrupts
serial: sc16is7xx: remove useless enable of enhanced features
serial: 8250_exar: add support for Advantech 2 port card with Device ID 0x0018
tty: serial: sh-sci: fix RSCI FIFO overrun handling
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes and new device ids for 6.18-rc3.
Included in here are:
- new option serial driver device ids added
- dt bindings fixes for numerous platforms
- xhci bugfixes for many reported regressions
- usbio dependency bugfix
- dwc3 driver fix
- raw-gadget bugfix
All of these have been in linux-next this week with no reported issues"
* tag 'usb-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: option: add Telit FN920C04 ECM compositions
USB: serial: option: add Quectel RG255C
tcpm: switch check for role_sw device with fw_node
usb/core/quirks: Add Huawei ME906S to wakeup quirk
usb: raw-gadget: do not limit transfer length
USB: serial: option: add UNISOC UIS7720
xhci: dbc: enable back DbC in resume if it was enabled before suspend
xhci: dbc: fix bogus 1024 byte prefix if ttyDBC read races with stall event
usb: xhci-pci: Fix USB2-only root hub registration
dt-bindings: usb: qcom,snps-dwc3: Fix bindings for X1E80100
usb: misc: Add x86 dependency for Intel USBIO driver
dt-bindings: usb: switch: split out ports definition
usb: dwc3: Don't call clk_bulk_disable_unprepare() twice
dt-bindings: usb: dwc3-imx8mp: dma-range is required only for imx8mp
Pull spi fixes from Mark Brown:
"A moderately large collection of device specific changes here, mostly
fixes but also including a few new quirks and device IDs. This is all
fairly routine even for the affected devices"
* tag 'spi-fix-v6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: dt-bindings: spi-rockchip: Add RK3506 compatible
spi: intel-pci: Add support for Intel Wildcat Lake SPI serial flash
spi: intel-pci: Add support for Arrow Lake-H SPI serial flash
spi: intel: Add support for 128M component density
spi: airoha: fix reading/writing of flashes with more than one plane per lun
spi: airoha: switch back to non-dma mode in the case of error
spi: airoha: add support of dual/quad wires spi modes to exec_op() handler
spi: airoha: return an error for continuous mode dirmap creation cases
spi: amlogic: fix spifc build error
spi: cadence-quadspi: Fix pm_runtime unbalance on dma EPROBE_DEFER
spi: spi-nxp-fspi: limit the clock rate for different sample clock source selection
spi: spi-nxp-fspi: add extra delay after dll locked
spi: spi-nxp-fspi: re-config the clock rate when operation require new clock rate
spi: dw-mmio: add error handling for reset_control_deassert()
spi: rockchip-sfc: Fix DMA-API usage
spi: dt-bindings: cadence: add soc-specific compatible strings for zynqmp and versal-net
Pull SCSI fixes from James Bottomley:
"All driver fixes. The big change is the storvsc one to rejig the
hyper-v channel handling to be more efficient for SMP virtual
machines"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: phy: dt-bindings: Add QMP UFS PHY compatible for Kaanapali
scsi: ufs: qcom: dt-bindings: Document the Kaanapali UFS controller
scsi: libfc: Prevent integer overflow in fc_fcp_recv_data()
scsi: qla4xxx: Fix typos in comments
scsi: storvsc: Prefer returning channel with the same CPU as on the I/O issuing CPU
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. All changes are rather boring
device-specific fixes and quirks:
- A few fixes for missing NULL checks
- ASoC NAU8821 fixes for jack and irq handling
- Various fixes for ASoC TAS2781, IDT821034, sc8280xp, max9809x,
wcd938x, and SoundWire
- Usual HD-audio and USB-audio quirks"
* tag 'sound-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (27 commits)
ALSA: hda/realtek: Fix mute led for HP Omen 17-cb0xxx
ALSA: usb-audio: fix vendor quirk for Logitech H390
ALSA: usb-audio: add volume quirks for MS LifeChat LX-3000
ASoC: amd/sdw_utils: avoid NULL deref when devm_kasprintf() fails
ASoC: max98090/91: fixed max98091 ALSA widget powering up/down
ASoC: dt-bindings: Add compatible string fsl,imx-audio-tlv320
ASoC: codecs: wcd938x-sdw: remove redundant runtime pm calls
ASoC: sdw_utils: add rt1321 part id to codec_info_list
ALSA: usb-audio: Fix NULL pointer deference in try_to_register_card
ALSA: firewire: amdtp-stream: fix enum kernel-doc warnings
ALSA: usb-audio: add mixer_playback_min_mute quirk for Logitech H390
ASoC: nau8821: Avoid unnecessary blocking in IRQ handler
ASoC: nau8821: Add DMI quirk to bypass jack debounce circuit
ASoC: nau8821: Consistently clear interrupts before unmasking
ASoC: nau8821: Generalize helper to clear IRQ status
ASoC: nau8821: Cancel jdet_work before handling jack ejection
ASoC: codecs: Fix gain setting ranges for Renesas IDT821034 codec
ASoC: tas2781: Update ti,tas2781.yaml for adding tas58xx
ASoC: tas2781: Support more newly-released amplifiers tas58xx in the driver
ASoC: qcom: sc8280xp: Add support for QCS615
...
Merge series from Le Qi <le.qi@oss.qualcomm.com>:
This patch series adds support for the QCS615 sound card:
- Updates device tree bindings for SM8250 to include QCS615.
- Adds QCS615 support in the SC8280XP ASoC driver.
Add the missing multiport controller binding to target list.
Fix minItems for interrupt-names to avoid the following error on High
Speed controller:
usb@a200000: interrupt-names: ['dwc_usb3', 'pwr_event', 'dp_hs_phy_irq', 'dm_hs_phy_irq'] is too short
Fixes: 6e762f7b8e ("dt-bindings: usb: Introduce qcom,snps-dwc3")
Cc: stable@vger.kernel.org
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ports definition currently defined in the usb-switch.yaml
fits standards devices which are either recipient of altmode
muxing and orientation switching events or an element of the
USB Super Speed data lanes.
This doesn't necessarely fit combo PHYs like the Qualcomm
USB3/DP Combo which has a different ports representation.
Move the ports definition to a separate usb-switch-ports.yaml
and reference it next to the usb-switch.yaml, except for
the Qualcomm USB3/DP Combo PHY bindings.
Reported-by: Rob Herring <robh@kernel.org>
Closes: https://lore.kernel.org/all/175462129176.394940.16810637795278334342.robh@kernel.org/
Fixes: 3bad7fe227 ("dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp: Reference usb-switch.yaml to allow mode-switch")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add missed compatible string for arm64 layerscape platform. Allow these
fallback to fsl,ls1028a-dwc3.
Remove fallback snps,dwc3 because layerscape dwc3 is not full compatible
with common snps,dwc3 device, a special value gsburstcfg0 need be set when
dma coherence enabled.
Allow iommus property.
Change ref to snps,dwc3-common.yaml to use dwc3 flatten library.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250929-ls_dma_coherence-v5-1-2ebee578eb7e@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Marvell Armada 37xx and 8k platforms compatible property don't
match the binding schema. They are compatible with the "generic-xhci"
compatible. The 37xx does have a quirk for "reset on resume", but that's
probably not required to function in all situations.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250919223433.2399927-2-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Allow "iommus" property as it's reasonable for any XHCI controller to be
behind an IOMMU. Allow "dr_mode" as an XHCI controller can be part of a
dual-role controller.
In particular, the Marvell Armada 8K XHCI controller uses both of these
properties.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250919223433.2399927-1-robh@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull devicetree fixes from Rob Herring:
- Allow child nodes on renesas-bsc bus binding
- Drop node name pattern on allwinner,sun50i-a64-de2 bus binding
- Switch DT patchwork to kernel.org from ozlabs.org
- Fix some typos in docs and bindings
- Fix reference count in PCI node unittest
* tag 'devicetree-fixes-for-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: bus: renesas-bsc: allow additional properties
dt-bindings: bus: allwinner,sun50i-a64-de2: don't check node names
MAINTAINERS: Move DT patchwork to kernel.org
of: unittest: Fix device reference count leak in of_unittest_pci_node_verify
of: doc: Fix typo in doc comments.
dt-bindings: mmc: Correct typo "upto" to "up to"
Allow additional properties to enable devices attached to the bus.
Fixes warnings like these:
arch/arm/boot/dts/renesas/sh73a0-kzm9g.dtb: bus@fec10000 (renesas,bsc-sh73a0): Unevaluated properties are not allowed ('ethernet@10000000' was unexpected)
arch/arm/boot/dts/renesas/r8a73a4-ape6evm.dtb: bus@fec10000 (renesas,bsc-r8a73a4): Unevaluated properties are not allowed ('ethernet@8000000', 'flash@0' were unexpected)
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Node names are already and properly checked by the core schema. No need
to do it again.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
[robh: Also drop [A-F] in unit address]
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Pull more i2c updates from Wolfram Sang:
- Second part of rtl9300 updates since dependencies are in now:
- general cleanups
- implement block read/write support
- add RTL9310 support
- DT schema conversion of hix5hd2 binding
- namespace cleanup for i2c-algo-pca
- minor simplification for mt65xx
* tag 'i2c-for-6.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
dt-bindings: i2c: hisilicon,hix5hd2: convert to DT schema
i2c: mt65xx: convert set_speed function to void
i2c: rename wait_for_completion callback to wait_for_completion_cb
i2c: rtl9300: add support for RTL9310 I2C controller
dt-bindings: i2c: realtek,rtl9301-i2c: extend for RTL9310 support
i2c: rtl9300: use scoped guard instead of explicit lock/unlock
i2c: rtl9300: separate xfer configuration and execution
i2c: rtl9300: do not set read mode on every transfer
i2c: rtl9300: move setting SCL frequency to config_io
i2c: rtl9300: rename internal sda_pin to sda_num
dt-bindings: i2c: realtek,rtl9301-i2c: fix wording and typos
i2c: rtl9300: use regmap fields and API for registers
i2c: rtl9300: Implement I2C block read and write
Pull input updates from Dmitry Torokhov:
- Conversions to yaml/json schema and fixes for input-related device
tree bindings
- New drivers:
- Awinic AW86927 haptic chip
- Hynitron CST816x series controller
- Himax HX852x(ES) touchscreen controller
- Fix uinput to not leak kernel memory via a gap in
uinput_ff_upload_compat structure
- Prevent overflow in pressure calculation in tsc2007 driver causing
phantom touches
- Make the Atmel maxTouch driver support generic touchscreen
configuration (flip, rotate, etc)
- Drop support for platform data in tca8418_keypad, pxa27x-keypad,
spear-keyboard and twl4030_keypad drivers, they all now rely on
generic device properties for configuration
- Other assorted changes and fixes
* tag 'input-for-v6.18-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (50 commits)
Input: atmel_mxt_ts - allow reset GPIO to sleep
Input: aw86927 - fix error code in probe()
Input: psxpad-spi - add a check for the return value of spi_setup()
Input: uinput - zero-initialize uinput_ff_upload_compat to avoid info leak
Input: aw86927 - add driver for Awinic AW86927
dt-bindings: input: Add Awinic AW86927
dt-bindings: touchscreen: remove touchscreen.txt
dt-bindings: arm: bcm: raspberrypi,bcm2835-firmware: Add touchscreen child node
dt-bindings: touchscreen: convert eeti bindings to json schema
Input: pm8941-pwrkey - disable wakeup for resin by default
dt-bindings: input: pm8941-pwrkey: Document wakeup-source property
Input: add driver for Hynitron CST816x series
dt-bindings: input: touchscreen: add hynitron cst816x series
Input: imx6ul_tsc - set glitch threshold by DTS property
dt-bindings: touchscreen: fsl,imx6ul-tsc: support glitch thresold
dt-bindings: touchscreen: add debounce-delay-us property
Input: ps2-gpio - fix typo
Input: atmel_mxt_ts - add support for generic touchscreen configurations
dt-bindings: input: maxtouch: add common touchscreen properties
dt-bindings: touchscreen: convert zet6223 bindings to json schema
...
Pull clk updates from Stephen Boyd:
"There's a bunch of patches here across drivers/clk/ to migrate drivers
to use struct clk_ops::determine_rate() instead of the round_rate()
one so that we can remove the round_rate clk_op entirely. Brian has
taken up that task which nobody else has wanted to do for close to a
decade. Thanks Brian!
This is all prerequisite work to get to the real task of improving the
clk rate setting process. Once we have determine_rate() used
everywhere, we'll be able to do things like chain the rate request
structs in linked lists to order the rate setting operations or add
more parameters without having to change every clk driver in
existence. It's also nice to not have multiple ways to do something
which just causes confusion for clk driver authors. Overall I'm glad
this is getting done.
Beyond this change we also have a tweak to the clk_lookup() function
in the core framework to use hashing on the clk name instead of a clk
tree walk with string comparisons. We _still_ rely on the clk name to
be unique, because historically we've used globally unique strings to
describe the clk tree topology. This tree walk becomes increasingly
slow as more clks are added to the system. Searching from the roots
for a duplicate is simple but pretty dumb and it wastes boot time so
we're using a hash table as an improvement. Ideally we wouldn't rely
on the strings to be unique at all, relegating them to simply debug
information, but that is future work that will likely require some
sort of Kconfig knob indicating strings aren't used for topology
description.
Outside of the core framework changes we have the usual new SoC
support and fixes to clk drivers for things that were discovered once
the clks were used by consumer drivers. Nothing in particular is
jumping out at me in the "misc" pile, except maybe the Amlogic driver
that has gone through a refactoring. That series got a fix from
testing in -next though so it seems likely that things have been
getting good test coverage for a couple weeks already"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (299 commits)
clk: microchip: core: remove duplicate roclk_determine_rate()
reset: aspeed: register AST2700 reset auxiliary bus device
dt-bindings: clock: ast2700: modify soc0/1 clock define
clk: tegra: do not overallocate memory for bpmp clocks
clk: ep93xx: Use int type to store negative error codes
clk: nxp: Fix pll0 rate check condition in LPC18xx CGU driver
clk: loongson2: Add clock definitions for Loongson-2K0300 SoC
clk: loongson2: Avoid hardcoding firmware name of the reference clock
clk: loongson2: Allow zero divisors for dividers
clk: loongson2: Support scale clocks with an alternative mode
clk: loongson2: Allow specifying clock flags for gate clock
dt-bindings: clock: loongson2: Add Loongson-2K0300 compatible
clk: clocking-wizard: Fix output clock register offset for Versal platforms
clk: xilinx: Optimize divisor search in clk_wzrd_get_divisors_ver()
clk: mmp: pxa1908: Instantiate power driver through auxiliary bus
clk: s2mps11: add support for S2MPG10 PMIC clock
dt-bindings: clock: samsung,s2mps11: add s2mpg10
dt-bindings: stm32: cosmetic fixes for STM32MP25 clock and reset bindings
clk: stm32: introduce clocks for STM32MP21 platform
dt-bindings: stm32: add STM32MP21 clocks and reset bindings
...
Document the QMP UFS PHY compatible for Qualcomm Kaanapali to support
physical layer functionality for UFS found on the SoC. Use fallback to
indicate the compatibility of the QMP UFS PHY on the Kaanapali with that
on the SM8750.
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The MediaTek MT8196 SoC includes an embedded MCU referred to as "GPUEB",
acting as glue logic to control power and frequency of the Mali GPU.
This MCU runs special-purpose firmware for this use, and the main
application processor communicates with it through a mailbox.
Add a binding that describes this mailbox.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The GCE Mailbox needs only one clock and the clock-names can be
used only by the driver (which, for instance, does not use it),
and this is true for all of the currently supported MediaTek SoCs.
Stop requiring to specify clock-names on all non-MT8195 GCEs.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Document CPU Control Processor (CPUCP) mailbox controller for Qualcomm
Glymur SoCs. It is software compatible with X1E80100 CPUCP mailbox
controller hence fallback to it.
Signed-off-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Pull watchdog updates from Wim Van Sebroeck:
- renesas,wdt: Add support for RZ/T2H and RZ/N2H
- Add SMARC-sAM67 support
- Several small fixes and improvements
* tag 'linux-watchdog-6.18-rc1' of git://www.linux-watchdog.org/linux-watchdog:
watchdog/hpwdt New maintianer
dt-bindings: watchdog: add SMARC-sAM67 support
watchdog: mpc8xxx_wdt: Reload the watchdog timer when enabling the watchdog
watchdog: visconti: don't print superfluous errors
watchdog: rzv2h_wdt: don't print superfluous errors
watchdog: rzg2l_wdt: don't print superfluous errors
watchdog: s3c2410_wdt: exynosautov9: Enable supported features
watchdog: s3c2410_wdt: exynosautov920: Enable QUIRK_HAS_32BIT_CNT
watchdog: s3c2410_wdt: Increase max timeout value of watchdog
watchdog: s3c2410_wdt: Fix max_timeout being calculated larger
watchdog: s3c2410_wdt: Replace hardcoded values with macro definitions
watchdog: rzv2h: Improve error strings and add newlines
watchdog: rzv2h: Add support for RZ/T2H
watchdog: rzv2h: Add support for configurable count clock source
watchdog: rzv2h: Make "oscclk" and reset controller optional
watchdog: rzv2h: Obtain clock-divider and timeout values from OF match data
dt-bindings: watchdog: renesas,wdt: Add support for RZ/T2H and RZ/N2H
watchdog: intel_oc_wdt: Do not try to write into const memory
- Speed up clk_core_lookup() by using a hashtable
* clk-microchip:
ARM: at91: remove default values for PMC_PLL_ACR
clk: at91: add ACR in all PLL settings
clk: at91: sam9x7: Add peripheral clock id for pmecc
clk: at91: clk-master: Add check for divide by 3
clk: at91: clk-sam9x60-pll: force write to PLL_UPDT register
ARM: at91: pm: save and restore ACR during PLL disable/enable
* clk-lookup:
clk: Use hashtable for global clk lookups
clk: Sort include statements
* clk-st:
dt-bindings: stm32: cosmetic fixes for STM32MP25 clock and reset bindings
clk: stm32: introduce clocks for STM32MP21 platform
dt-bindings: stm32: add STM32MP21 clocks and reset bindings
