Pull drm updates from Dave Airlie:
"cross-subsystem:
- i2c-hid: Make elan touch controllers power on after panel is
enabled
- dt bindings for STM32MP25 SoC
- pci vgaarb: use screen_info helpers
- rust pin-init updates
- add MEI driver for late binding firmware update/load
uapi:
- add ioctl for reassigning GEM handles
- provide boot_display attribute on boot-up devices
core:
- document DRM_MODE_PAGE_FLIP_EVENT
- add vendor specific recovery method to drm device wedged uevent
gem:
- Simplify gpuvm locking
ttm:
- add interface to populate buffers
sched:
- Fix race condition in trace code
atomic:
- Reallow no-op async page flips
display:
- dp: Fix command length
video:
- Improve pixel-format handling for struct screen_info
rust:
- drop Opaque<> from ioctl args
- Alloc:
- BorrowedPage type and AsPageIter traits
- Implement Vmalloc::to_page() and VmallocPageIter
- DMA/Scatterlist:
- Add dma::DataDirection and type alias for dma_addr_t
- Abstraction for struct scatterlist and sg_table
- DRM:
- simplify use of generics
- add DriverFile type alias
- drop Object::SIZE
- Rust:
- pin-init tree merge
- Various methods for AsBytes and FromBytes traits
gpuvm:
- Support madvice in Xe driver
gpusvm:
- fix hmm_pfn_to_map_order usage in gpusvm
bridge:
- Improve and fix ref counting on bridge management
- cdns-dsi: Various improvements to mode setting
- Support Solomon SSD2825 plus DT bindings
- Support Waveshare DSI2DPI plus DT bindings
- Support Content Protection property
- display-connector: Improve DP display detection
- Add support for Radxa Ra620 plus DT bindings
- adv7511: Provide SPD and HDMI infoframes
- it6505: Replace crypto_shash with sha()
- synopsys: Add support for DW DPTX Controller plus DT bindings
- adv7511: Write full Audio infoframe
- ite6263: Support vendor-specific infoframes
- simple: Add support for Realtek RTD2171 DP-to-HDMI plus DT bindings
panel:
- panel-edp: Support mt8189 Chromebooks; Support BOE NV140WUM-N64;
Support SHP LQ134Z1; Fixes
- panel-simple: Support Olimex LCD-OLinuXino-5CTS plus DT bindings
- Support Samsung AMS561RA01
- Support Hydis HV101HD1 plus DT bindings
- ilitek-ili9881c: Refactor mode setting; Add support for Bestar
BSD1218-A101KL68 LCD plus DT bindings
- lvds: Add support for Ampire AMP19201200B5TZQW-T03 to DT bindings
- edp: Add support for additonal mt8189 Chromebook panels
- lvds: Add DT bindings for EDT ETML0700Z8DHA
amdgpu:
- add CRIU support for gem objects
- RAS updates
- VCN SRAM load fixes
- EDID read fixes
- eDP ALPM support
- Documentation updates
- Rework PTE flag generation
- DCE6 fixes
- VCN devcoredump cleanup
- MMHUB client id fixes
- VCN 5.0.1 RAS support
- SMU 13.0.x updates
- Expanded PCIe DPC support
- Expanded VCN reset support
- VPE per queue reset support
- give kernel jobs unique id for tracing
- pre-populate exported buffers
- cyan skillfish updates
- make vbios build number available in sysfs
- userq updates
- HDCP updates
- support MMIO remap page as ttm pool
- JPEG parser updates
- DCE6 DC updates
- use devm for i2c buses
- GPUVM locking updates
- Drop non-DC DCE11 code
- improve fallback handling for pixel encoding
amdkfd:
- SVM/page migration fixes
- debugfs fixes
- add CRIO support for gem objects
- SVM updates
radeon:
- use dev_warn_once in CS parsers
xe:
- add madvise interface
- add DRM_IOCTL_XE_VM_QUERY_MEMORY_RANGE_ATTRS to query VMA count
and memory attributes
- drop L# bank mask reporting from media GT3 on Xe3+.
- add SLPC power_profile sysfs interface
- add configs attribs to add post/mid context-switch commands
- handle firmware reported hardware errors notifying userspace with
device wedged uevent
- use same dir structure across sysfs/debugfs
- cleanup and future proof vram region init
- add G-states and PCI link states to debugfs
- Add SRIOV support for CCS surfaces on Xe2+
- Enable SRIOV PF mode by default on supported platforms
- move flush to common code
- extended core workarounds for Xe2/3
- use DRM scheduler for delayed GT TLB invalidations
- configs improvements and allow VF device enablement
- prep work to expose mmio regions to userspace
- VF migration support added
- prepare GPU SVM for THP migration
- start fixing XE_PAGE_SIZE vs PAGE_SIZE
- add PSMI support for hw validation
- resize VF bars to max possible size according to number of VFs
- Ensure GT is in C0 during resume
- pre-populate exported buffers
- replace xe_hmm with gpusvm
- add more SVM GT stats to debugfs
- improve fake pci and WA kunnit handle for new platform testing
- Test GuC to GuC comms to add debugging
- use attribute groups to simplify sysfs registration
- add Late Binding firmware code to interact with MEI
i915:
- apply multiple JSL/EHL/Gen7/Gen6 workarounds properly
- protect against overflow in active_engine()
- Use try_cmpxchg64() in __active_lookup()
- include GuC registers in error state
- get rid of dev->struct_mutex
- iopoll: generalize read_poll_timout
- lots more display refactoring
- Reject HBR3 in any eDP Panel
- Prune modes for YUV420
- Display Wa fix, additions, and updates
- DP: Fix 2.7 Gbps link training on g4x
- DP: Adjust the idle pattern handling
- DP: Shuffle the link training code a bit
- Don't set/read the DSI C clock divider on GLK
- Enable_psr kernel parameter changes
- Type-C enabled/disconnected dp-alt sink
- Wildcat Lake enabling
- DP HDR updates
- DRAM detection
- wait PSR idle on dsb commit
- Remove FBC modulo 4 restriction for ADL-P+
- panic: refactor framebuffer allocation
habanalabs:
- debug/visibility improvements
- vmalloc-backed coherent mmap support
- HLDIO infrastructure
nova-core:
- various register!() macro improvements
- minor vbios/firmware fixes/refactoring
- advance firmware boot stages; process Booter and patch signatures
- process GSP and GSP bootloader
- Add r570.144 firmware bindings and update to it
- Move GSP boot code to own module
- Use new pin-init features to store driver's private data in a
single allocation
- Update ARef import from sync::aref
nova-drm:
- Update ARef import from sync::aref
tyr:
- initial driver skeleton for a rust driver for ARM Mali GPUs
- capable of powering up, query metadata and provide it to userspace.
msm:
- GPU and Core:
- in DT bindings describe clocks per GPU type
- GMU bandwidth voting for x1-85
- a623/a663 speedbins
- cleanup some remaining no-iommu leftovers after VM_BIND conversion
- fix GEM obj 32b size truncation
- add missing VM_BIND param validation
- IFPC for x1-85 and a750
- register xml and gen_header.py sync from mesa
- Display:
- add missing bindings for display on SC8180X
- added DisplayPort MST bindings
- conversion from round_rate() to determine_rate()
amdxdna:
- add IOCTL_AMDXDNA_GET_ARRAY
- support user space allocated buffers
- streamline PM interfaces
- Refactoring wrt. hardware contexts
- improve error reporting
nouveau:
- use GSP firmware by default
- improve error reporting
- Pre-populate exported buffers
ast:
- Clean up detection of DRAM config
exynos:
- add DSIM bridge driver support for Exynos7870
- Document Exynos7870 DSIM compatible in dt-binding
panthor:
- Print task/pid on errors
- Add support for Mali G710, G510, G310, Gx15, Gx20, Gx25
- Improve cache flushing
- Fail VM bind if BO has offset
renesas:
- convert to RUNTIME_PM_OPS
rcar-du:
- Make number of lanes configurable
- Use RUNTIME_PM_OPS
- Add support for DSI commands
rocket:
- Add driver for Rockchip NPU plus DT bindings
- Use kfree() and sizeof() correctly
- Test DMA status
rockchip:
- dsi2: Add support for RK3576 plus DT bindings
- Add support for RK3588 DPTX output
tidss:
- Use crtc_ fields for programming display mode
- Remove other drivers from aperture
pixpaper:
- Add support for Mayqueen Pixpaper plus DT bindings
v3d:
- Support querying nubmer of GPU resets for KHR_robustness
stm:
- Clean up logging
- ltdc: Add support support for STM32MP257F-EV1 plus DT bindings
sitronix:
- st7571-i2c: Add support for inverted displays and 2-bit grayscale
tidss:
- Convert to kernel's FIELD_ macros
vesadrm:
- Support 8-bit palette mode
imagination:
- Improve power management
- Add support for TH1520 GPU
- Support Risc-V architectures
v3d:
- Improve job management and locking
vkms:
- Support variants of ARGB8888, ARGB16161616, RGB565, RGB888 and P01x
- Spport YUV with 16-bit components"
* tag 'drm-next-2025-10-01' of https://gitlab.freedesktop.org/drm/kernel: (1455 commits)
drm/amd: Add name to modes from amdgpu_connector_add_common_modes()
drm/amd: Drop some common modes from amdgpu_connector_add_common_modes()
drm/amdgpu: update MODULE_PARM_DESC for freesync_video
drm/amd: Use dynamic array size declaration for amdgpu_connector_add_common_modes()
drm/amd/display: Share dce100_validate_global with DCE6-8
drm/amd/display: Share dce100_validate_bandwidth with DCE6-8
drm/amdgpu: Fix fence signaling race condition in userqueue
amd/amdkfd: enhance kfd process check in switch partition
amd/amdkfd: resolve a race in amdgpu_amdkfd_device_fini_sw
drm/amd/display: Reject modes with too high pixel clock on DCE6-10
drm/amd: Drop unnecessary check in amdgpu_connector_add_common_modes()
drm/amd/display: Only enable common modes for eDP and LVDS
drm/amdgpu: remove the redeclaration of variable i
drm/amdgpu/userq: assign an error code for invalid userq va
drm/amdgpu: revert "rework reserved VMID handling" v2
drm/amdgpu: remove leftover from enforcing isolation by VMID
drm/amdgpu: Add fallback to pipe reset if KCQ ring reset fails
accel/habanalabs: add Infineon version check
accel/habanalabs/gaudi2: read preboot status after recovering from dirty state
accel/habanalabs: add HL_GET_P_STATE passthrough type
...
Pull alloc and DMA updates from Danilo Krummrich:
Box:
- Implement Borrow / BorrowMut for Box<T, A>.
Vec:
- Implement Default for Vec<T, A>.
- Implement Borrow / BorrowMut for Vec<T, A>.
DMA:
- Clarify wording and be consistent in 'coherent' nomenclature.
- Convert the read!() / write!() macros to return a Result.
- Add as_slice() / write() methods in CoherentAllocation.
- Fix doc-comment of dma_handle().
- Expose count() and size() in CoherentAllocation and add the
corresponding type invariants.
- Implement CoherentAllocation::dma_handle_with_offset().
- Require mutable reference for as_slice_mut() and write().
MAINTAINERS:
- Add Vlastimil Babka, Liam R. Howlett, Uladzislau Rezki and Lorenzo
Stoakes as reviewers (thanks everyone).
* tag 'alloc-next-v6.17-2025-07-15' of https://github.com/Rust-for-Linux/linux:
MAINTAINERS: add mm folks as reviewers to rust alloc
rust: dma: require mutable reference for as_slice_mut() and write()
rust: dma: add dma_handle_with_offset method to CoherentAllocation
rust: dma: expose the count and size of CoherentAllocation
rust: dma: fix doc-comment of dma_handle()
rust: dma: add as_slice/write functions for CoherentAllocation
rust: dma: convert the read/write macros to return Result
rust: dma: clarify wording and be consistent in `coherent` nomenclature
rust: alloc: implement `Borrow` and `BorrowMut` for `KBox`
rust: alloc: implement `Borrow` and `BorrowMut` for `Vec`
rust: vec: impl Default for Vec with any allocator
In Rust 1.51.0, Clippy introduced the `ptr_as_ptr` lint [1]:
> Though `as` casts between raw pointers are not terrible,
> `pointer::cast` is safer because it cannot accidentally change the
> pointer's mutability, nor cast the pointer to other types like `usize`.
There are a few classes of changes required:
- Modules generated by bindgen are marked
`#[allow(clippy::ptr_as_ptr)]`.
- Inferred casts (` as _`) are replaced with `.cast()`.
- Ascribed casts (` as *... T`) are replaced with `.cast::<T>()`.
- Multistep casts from references (` as *const _ as *const T`) are
replaced with `core::ptr::from_ref(&x).cast()` with or without `::<T>`
according to the previous rules. The `core::ptr::from_ref` call is
required because `(x as *const _).cast::<T>()` results in inference
failure.
- Native literal C strings are replaced with `c_str!().as_char_ptr()`.
- `*mut *mut T as _` is replaced with `let *mut *const T = (*mut *mut
T)`.cast();` since pointer to pointer can be confusing.
Apply these changes and enable the lint -- no functional change
intended.
Link: https://rust-lang.github.io/rust-clippy/master/index.html#ptr_as_ptr [1]
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250615-ptr-as-ptr-v12-1-f43b024581e8@gmail.com
[ Added `.cast()` for `opp`. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Implement `Borrow<[T]>` and `BorrowMut<[T]>` for `Vec<T>`. This allows
`Vec<T>` to be used in generic APIs asking for types implementing those
traits. `[T; N]` and `&mut [T]` also implement those traits allowing
users to use either owned, borrowed and heap-owned values.
The implementation leverages `as_slice` and `as_mut_slice`.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://lore.kernel.org/r/20250616-borrow_impls-v4-1-36f9beb3fe6a@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The implementation of Default is restricted to only work with kmalloc
vectors for no good reason. This means I have to use
mem::replace(&mut my_vec, KVVec::new())
in Rust Binder instead of `mem::take(&mut my_vec)`. Thus, expand the
impl of Default to work with any allocator including kvmalloc.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Link: https://lore.kernel.org/r/20250610-vec-default-v1-1-7bb2c97d75a0@google.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
For the Rust 1.87.0 release, Clippy was expected to warn with:
error: use `core::ptr::eq` when comparing raw pointers
--> rust/kernel/list.rs:438:12
|
438 | if self.first == item {
| ^^^^^^^^^^^^^^^^^^ help: try: `core::ptr::eq(self.first, item)`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#ptr_eq
= note: `-D clippy::ptr-eq` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::ptr_eq)]`
However, a backport to relax a bit the `clippy::ptr_eq` finally landed,
and thus Clippy did not warn by the time the release happened.
Thus remove the `allow`s added back then, which were added just in case
the backport did not land in time.
See commit a39f308709 ("rust: allow Rust 1.87.0's `clippy::ptr_eq`
lint") for details.
Link: https://github.com/rust-lang/rust/pull/140859 [1]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250520182125.806758-1-ojeda@kernel.org
[ Reworded for clarity. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
This is needed by Rust Binder in the range allocator, and by upcoming
GPU drivers during firmware initialization.
Panics in the kernel are best avoided when possible, so an error is
returned if the index is out of bounds. An error type is used rather
than just returning Option<T> to let callers handle errors with ?.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Link: https://lore.kernel.org/r/20250502-vec-methods-v5-6-06d20ad9366f@google.com
[ Remove `# Panics` section; `Vec::remove() handles the error properly.`
- Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
This adds a common Vec method called `retain` that removes all elements
that don't match a certain condition. Rust Binder uses it to find all
processes that match a given pid.
The stdlib retain method takes &T rather than &mut T and has a separate
retain_mut for the &mut T case. However, this is considered an API
mistake that can't be fixed now due to backwards compatibility. There's
no reason for us to repeat that mistake.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Link: https://lore.kernel.org/r/20250502-vec-methods-v5-5-06d20ad9366f@google.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
This is like the stdlib method drain, except that it's hard-coded to use
the entire vector's range. Rust Binder uses it in the range allocator to
take ownership of everything in a vector in a case where reusing the
vector is desirable.
Implementing `DrainAll` in terms of `slice::IterMut` lets us reuse some
nice optimizations in core for the case where T is a ZST.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Link: https://lore.kernel.org/r/20250502-vec-methods-v5-4-06d20ad9366f@google.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
This introduces a new method called `push_within_capacity` for appending
to a vector without attempting to allocate if the capacity is full. Rust
Binder will use this in various places to safely push to a vector while
holding a spinlock.
The implementation is moved to a push_within_capacity_unchecked method.
This is preferred over having push() call push_within_capacity()
followed by an unwrap_unchecked() for simpler unsafe.
Panics in the kernel are best avoided when possible, so an error is
returned if the vector does not have sufficient capacity. An error type
is used rather than just returning Result<(),T> to make it more
convenient for callers (i.e. they can use ? or unwrap).
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Benno Lossin <lossin@kernel.org>
Link: https://lore.kernel.org/r/20250502-vec-methods-v5-3-06d20ad9366f@google.com
[ Remove public visibility from `Vec::push_within_capacity_unchecked()`.
- Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Add `Vec::dec_len` that reduces the length of the receiver. This method
is intended to be used from methods that remove elements from `Vec` such
as `truncate`, `pop`, `remove`, and others. This method is intentionally
not `pub`.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Link: https://lore.kernel.org/r/20250416-vec-set-len-v4-2-112b222604cd@gmail.com
[ Add #[expect(unused)] to dec_len(). - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Document the invariant that the vector's length is always less than or
equal to its capacity. This is already implied by these other
invariants:
- `self.len` always represents the exact number of elements stored in
the vector.
- `self.layout` represents the absolute number of elements that can be
stored within the vector without re-allocation.
but it doesn't hurt to spell it out. Note that the language references
`self.capacity` rather than `self.layout.len` as the latter is zero for
a vector of ZSTs.
Update a safety comment touched by this patch to correctly reference
`realloc` rather than `alloc` and replace "leaves" with "leave" to
improve grammar.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Link: https://lore.kernel.org/r/20250416-vec-set-len-v4-1-112b222604cd@gmail.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Currently, we can't implement `FromIterator`. There are a couple of
issues with this trait in the kernel, namely:
- Rust's specialization feature is unstable. This prevents us to
optimize for the special case where `I::IntoIter` equals `Vec`'s
`IntoIter` type.
- We also can't use `I::IntoIter`'s type ID either to work around this,
since `FromIterator` doesn't require this type to be `'static`.
- `FromIterator::from_iter` does return `Self` instead of
`Result<Self, AllocError>`, hence we can't properly handle allocation
failures.
- Neither `Iterator::collect` nor `FromIterator::from_iter` can handle
additional allocation flags.
Instead, provide `IntoIter::collect`, such that we can at least convert
`IntoIter` into a `Vec` again.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241004154149.93856-19-dakr@kernel.org
[ Added newline in documentation, changed case of section to be
consistent with an existing one, fixed typo. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Implement `IntoIterator` for `Vec`, `Vec`'s `IntoIter` type, as well as
`Iterator` for `IntoIter`.
`Vec::into_iter` disassembles the `Vec` into its raw parts; additionally,
`IntoIter` keeps track of a separate pointer, which is incremented
correspondingly as the iterator advances, while the length, or the count
of elements, is decremented.
This also means that `IntoIter` takes the ownership of the backing
buffer and is responsible to drop the remaining elements and free the
backing buffer, if it's dropped.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241004154149.93856-18-dakr@kernel.org
[ Fixed typos. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
`Vec` provides a contiguous growable array type with contents allocated
with the kernel's allocators (e.g. `Kmalloc`, `Vmalloc` or `KVmalloc`).
In contrast to Rust's stdlib `Vec` type, the kernel `Vec` type considers
the kernel's GFP flags for all appropriate functions, always reports
allocation failures through `Result<_, AllocError>` and remains
independent from unstable features.
[ This patch starts using a new unstable feature, `inline_const`, but
it was stabilized in Rust 1.79.0, i.e. the next version after the
minimum one, thus it will not be an issue. - Miguel ]
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241004154149.93856-17-dakr@kernel.org
[ Cleaned `rustdoc` unescaped backtick warning, added a couple more
backticks elsewhere, fixed typos, sorted `feature`s, rewrapped
documentation lines. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
