mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2026-04-02 21:05:30 -04:00
3d3c4cd5c62f24bb3cb4511b7a95df707635e00a
15405 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
07fdad3a93 |
Merge tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core & protocols:
- Improve drop account scalability on NUMA hosts for RAW and UDP
sockets and the backlog, almost doubling the Pps capacity under DoS
- Optimize the UDP RX performance under stress, reducing contention,
revisiting the binary layout of the involved data structs and
implementing NUMA-aware locking. This improves UDP RX performance
by an additional 50%, even more under extreme conditions
- Add support for PSP encryption of TCP connections; this mechanism
has some similarities with IPsec and TLS, but offers superior HW
offloads capabilities
- Ongoing work to support Accurate ECN for TCP. AccECN allows more
than one congestion notification signal per RTT and is a building
block for Low Latency, Low Loss, and Scalable Throughput (L4S)
- Reorganize the TCP socket binary layout for data locality, reducing
the number of touched cachelines in the fastpath
- Refactor skb deferral free to better scale on large multi-NUMA
hosts, this improves TCP and UDP RX performances significantly on
such HW
- Increase the default socket memory buffer limits from 256K to 4M to
better fit modern link speeds
- Improve handling of setups with a large number of nexthop, making
dump operating scaling linearly and avoiding unneeded
synchronize_rcu() on delete
- Improve bridge handling of VLAN FDB, storing a single entry per
bridge instead of one entry per port; this makes the dump order of
magnitude faster on large switches
- Restore IP ID correctly for encapsulated packets at GSO
segmentation time, allowing GRO to merge packets in more scenarios
- Improve netfilter matching performance on large sets
- Improve MPTCP receive path performance by leveraging recently
introduced core infrastructure (skb deferral free) and adopting
recent TCP autotuning changes
- Allow bridges to redirect to a backup port when the bridge port is
administratively down
- Introduce MPTCP 'laminar' endpoint that con be used only once per
connection and simplify common MPTCP setups
- Add RCU safety to dst->dev, closing a lot of possible races
- A significant crypto library API for SCTP, MPTCP and IPv6 SR,
reducing code duplication
- Supports pulling data from an skb frag into the linear area of an
XDP buffer
Things we sprinkled into general kernel code:
- Generate netlink documentation from YAML using an integrated YAML
parser
Driver API:
- Support using IPv6 Flow Label in Rx hash computation and RSS queue
selection
- Introduce API for fetching the DMA device for a given queue,
allowing TCP zerocopy RX on more H/W setups
- Make XDP helpers compatible with unreadable memory, allowing more
easily building DevMem-enabled drivers with a unified XDP/skbs
datapath
- Add a new dedicated ethtool callback enabling drivers to provide
the number of RX rings directly, improving efficiency and clarity
in RX ring queries and RSS configuration
- Introduce a burst period for the health reporter, allowing better
handling of multiple errors due to the same root cause
- Support for DPLL phase offset exponential moving average,
controlling the average smoothing factor
Device drivers:
- Add a new Huawei driver for 3rd gen NIC (hinic3)
- Add a new SpacemiT driver for K1 ethernet MAC
- Add a generic abstraction for shared memory communication
devices (dibps)
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- Use multiple per-queue doorbell, to avoid MMIO contention
issues
- support adjacent functions, allowing them to delegate their
SR-IOV VFs to sibling PFs
- support RSS for IPSec offload
- support exposing raw cycle counters in PTP and mlx5
- support for disabling host PFs.
- Intel (100G, ice, idpf):
- ice: support for SRIOV VFs over an Active-Active link
aggregate
- ice: support for firmware logging via debugfs
- ice: support for Earliest TxTime First (ETF) hardware offload
- idpf: support basic XDP functionalities and XSk
- Broadcom (bnxt):
- support Hyper-V VF ID
- dynamic SRIOV resource allocations for RoCE
- Meta (fbnic):
- support queue API, zero-copy Rx and Tx
- support basic XDP functionalities
- devlink health support for FW crashes and OTP mem corruptions
- expand hardware stats coverage to FEC, PHY, and Pause
- Wangxun:
- support ethtool coalesce options
- support for multiple RSS contexts
- Ethernet virtual:
- Macsec:
- replace custom netlink attribute checks with policy-level
checks
- Bonding:
- support aggregator selection based on port priority
- Microsoft vNIC:
- use page pool fragments for RX buffers instead of full pages
to improve memory efficiency
- Ethernet NICs consumer, and embedded:
- Qualcomm: support Ethernet function for IPQ9574 SoC
- Airoha: implement wlan offloading via NPU
- Freescale
- enetc: add NETC timer PTP driver and add PTP support
- fec: enable the Jumbo frame support for i.MX8QM
- Renesas (R-Car S4):
- support HW offloading for layer 2 switching
- support for RZ/{T2H, N2H} SoCs
- Cadence (macb): support TAPRIO traffic scheduling
- TI:
- support for Gigabit ICSS ethernet SoC (icssm-prueth)
- Synopsys (stmmac): a lot of cleanups
- Ethernet PHYs:
- Support 10g-qxgmi phy-mode for AQR412C, Felix DSA and Lynx PCS
driver
- Support bcm63268 GPHY power control
- Support for Micrel lan8842 PHY and PTP
- Support for Aquantia AQR412 and AQR115
- CAN:
- a large CAN-XL preparation work
- reorganize raw_sock and uniqframe struct to minimize memory
usage
- rcar_canfd: update the CAN-FD handling
- WiFi:
- extended Neighbor Awareness Networking (NAN) support
- S1G channel representation cleanup
- improve S1G support
- WiFi drivers:
- Intel (iwlwifi):
- major refactor and cleanup
- Broadcom (brcm80211):
- support for AP isolation
- RealTek (rtw88/89) rtw88/89:
- preparation work for RTL8922DE support
- MediaTek (mt76):
- HW restart improvements
- MLO support
- Qualcomm/Atheros (ath10k):
- GTK rekey fixes
- Bluetooth drivers:
- btusb: support for several new IDs for MT7925
- btintel: support for BlazarIW core
- btintel_pcie: support for _suspend() / _resume()
- btintel_pcie: support for Scorpious, Panther Lake-H484 IDs"
* tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1536 commits)
net: stmmac: Add support for Allwinner A523 GMAC200
dt-bindings: net: sun8i-emac: Add A523 GMAC200 compatible
Revert "Documentation: net: add flow control guide and document ethtool API"
octeontx2-pf: fix bitmap leak
octeontx2-vf: fix bitmap leak
net/mlx5e: Use extack in set rxfh callback
net/mlx5e: Introduce mlx5e_rss_params for RSS configuration
net/mlx5e: Introduce mlx5e_rss_init_params
net/mlx5e: Remove unused mdev param from RSS indir init
net/mlx5: Improve QoS error messages with actual depth values
net/mlx5e: Prevent entering switchdev mode with inconsistent netns
net/mlx5: HWS, Generalize complex matchers
net/mlx5: Improve write-combining test reliability for ARM64 Grace CPUs
selftests/net: add tcp_port_share to .gitignore
Revert "net/mlx5e: Update and set Xon/Xoff upon MTU set"
net: add NUMA awareness to skb_attempt_defer_free()
net: use llist for sd->defer_list
net: make softnet_data.defer_count an atomic
selftests: drv-net: psp: add tests for destroying devices
selftests: drv-net: psp: add test for auto-adjusting TCP MSS
...
|
||
|
Linus Torvalds
|
f79e772258 |
Merge tag 'media/v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab: - Added a new V4L2 clock helper - New camera sensor drivers - iris: Enable H.264/H.265 encoder support and fixes in iris driver common code - camss: add support for new SoC flavors - venus: add new SoC support - tc358743: support more infoframe types - Various fixes, driver improvements and cleanups * tag 'media/v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (439 commits) media: venus: pm_helpers: add fallback for the opp-table media: qcom: camss: vfe: Fix BPL alignment for QCM2290 media: tuner: xc5000: Fix use-after-free in xc5000_release media: i2c: tc358743: Fix use-after-free bugs caused by orphan timer in probe media: b2c2: Fix use-after-free causing by irq_check_work in flexcop_pci_remove media: vsp1: Export missing vsp1_isp_free_buffer symbol media: renesas: vsp1: Convert to SYSTEM_SLEEP/RUNTIME_PM_OPS() media: renesas: ceu: Convert to RUNTIME_PM_OPS() media: renesas: fdp1: Convert to RUNTIME_PM_OPS() media: renesas: rcar-vin: Convert to DEFINE_SIMPLE_DEV_PM_OPS() media: renesas: rcar_drif: Convert to DEFINE_SIMPLE_DEV_PM_OPS() media: uvcvideo: Mark invalid entities with id UVC_INVALID_ENTITY_ID media: uvcvideo: Support UVC_CROSXU_CONTROL_IQ_PROFILE media: uvcvideo: Run uvc_ctrl_init_ctrl for all controls media: uvcvideo: Shorten the transfer size non compliance message media: uvcvideo: Do not re-reference dev->udev media: uvcvideo: Use intf instead of udev for printks media: uvcvideo: Move video_device under video_queue media: uvcvideo: Drop stream->mutex media: uvcvideo: Move MSXU_CONTROL_METADATA definition to header ... |
||
|
Linus Torvalds
|
58809f614e |
Merge tag 'drm-next-2025-10-01' of https://gitlab.freedesktop.org/drm/kernel
Pull drm updates from Dave Airlie:
"cross-subsystem:
- i2c-hid: Make elan touch controllers power on after panel is
enabled
- dt bindings for STM32MP25 SoC
- pci vgaarb: use screen_info helpers
- rust pin-init updates
- add MEI driver for late binding firmware update/load
uapi:
- add ioctl for reassigning GEM handles
- provide boot_display attribute on boot-up devices
core:
- document DRM_MODE_PAGE_FLIP_EVENT
- add vendor specific recovery method to drm device wedged uevent
gem:
- Simplify gpuvm locking
ttm:
- add interface to populate buffers
sched:
- Fix race condition in trace code
atomic:
- Reallow no-op async page flips
display:
- dp: Fix command length
video:
- Improve pixel-format handling for struct screen_info
rust:
- drop Opaque<> from ioctl args
- Alloc:
- BorrowedPage type and AsPageIter traits
- Implement Vmalloc::to_page() and VmallocPageIter
- DMA/Scatterlist:
- Add dma::DataDirection and type alias for dma_addr_t
- Abstraction for struct scatterlist and sg_table
- DRM:
- simplify use of generics
- add DriverFile type alias
- drop Object::SIZE
- Rust:
- pin-init tree merge
- Various methods for AsBytes and FromBytes traits
gpuvm:
- Support madvice in Xe driver
gpusvm:
- fix hmm_pfn_to_map_order usage in gpusvm
bridge:
- Improve and fix ref counting on bridge management
- cdns-dsi: Various improvements to mode setting
- Support Solomon SSD2825 plus DT bindings
- Support Waveshare DSI2DPI plus DT bindings
- Support Content Protection property
- display-connector: Improve DP display detection
- Add support for Radxa Ra620 plus DT bindings
- adv7511: Provide SPD and HDMI infoframes
- it6505: Replace crypto_shash with sha()
- synopsys: Add support for DW DPTX Controller plus DT bindings
- adv7511: Write full Audio infoframe
- ite6263: Support vendor-specific infoframes
- simple: Add support for Realtek RTD2171 DP-to-HDMI plus DT bindings
panel:
- panel-edp: Support mt8189 Chromebooks; Support BOE NV140WUM-N64;
Support SHP LQ134Z1; Fixes
- panel-simple: Support Olimex LCD-OLinuXino-5CTS plus DT bindings
- Support Samsung AMS561RA01
- Support Hydis HV101HD1 plus DT bindings
- ilitek-ili9881c: Refactor mode setting; Add support for Bestar
BSD1218-A101KL68 LCD plus DT bindings
- lvds: Add support for Ampire AMP19201200B5TZQW-T03 to DT bindings
- edp: Add support for additonal mt8189 Chromebook panels
- lvds: Add DT bindings for EDT ETML0700Z8DHA
amdgpu:
- add CRIU support for gem objects
- RAS updates
- VCN SRAM load fixes
- EDID read fixes
- eDP ALPM support
- Documentation updates
- Rework PTE flag generation
- DCE6 fixes
- VCN devcoredump cleanup
- MMHUB client id fixes
- VCN 5.0.1 RAS support
- SMU 13.0.x updates
- Expanded PCIe DPC support
- Expanded VCN reset support
- VPE per queue reset support
- give kernel jobs unique id for tracing
- pre-populate exported buffers
- cyan skillfish updates
- make vbios build number available in sysfs
- userq updates
- HDCP updates
- support MMIO remap page as ttm pool
- JPEG parser updates
- DCE6 DC updates
- use devm for i2c buses
- GPUVM locking updates
- Drop non-DC DCE11 code
- improve fallback handling for pixel encoding
amdkfd:
- SVM/page migration fixes
- debugfs fixes
- add CRIO support for gem objects
- SVM updates
radeon:
- use dev_warn_once in CS parsers
xe:
- add madvise interface
- add DRM_IOCTL_XE_VM_QUERY_MEMORY_RANGE_ATTRS to query VMA count
and memory attributes
- drop L# bank mask reporting from media GT3 on Xe3+.
- add SLPC power_profile sysfs interface
- add configs attribs to add post/mid context-switch commands
- handle firmware reported hardware errors notifying userspace with
device wedged uevent
- use same dir structure across sysfs/debugfs
- cleanup and future proof vram region init
- add G-states and PCI link states to debugfs
- Add SRIOV support for CCS surfaces on Xe2+
- Enable SRIOV PF mode by default on supported platforms
- move flush to common code
- extended core workarounds for Xe2/3
- use DRM scheduler for delayed GT TLB invalidations
- configs improvements and allow VF device enablement
- prep work to expose mmio regions to userspace
- VF migration support added
- prepare GPU SVM for THP migration
- start fixing XE_PAGE_SIZE vs PAGE_SIZE
- add PSMI support for hw validation
- resize VF bars to max possible size according to number of VFs
- Ensure GT is in C0 during resume
- pre-populate exported buffers
- replace xe_hmm with gpusvm
- add more SVM GT stats to debugfs
- improve fake pci and WA kunnit handle for new platform testing
- Test GuC to GuC comms to add debugging
- use attribute groups to simplify sysfs registration
- add Late Binding firmware code to interact with MEI
i915:
- apply multiple JSL/EHL/Gen7/Gen6 workarounds properly
- protect against overflow in active_engine()
- Use try_cmpxchg64() in __active_lookup()
- include GuC registers in error state
- get rid of dev->struct_mutex
- iopoll: generalize read_poll_timout
- lots more display refactoring
- Reject HBR3 in any eDP Panel
- Prune modes for YUV420
- Display Wa fix, additions, and updates
- DP: Fix 2.7 Gbps link training on g4x
- DP: Adjust the idle pattern handling
- DP: Shuffle the link training code a bit
- Don't set/read the DSI C clock divider on GLK
- Enable_psr kernel parameter changes
- Type-C enabled/disconnected dp-alt sink
- Wildcat Lake enabling
- DP HDR updates
- DRAM detection
- wait PSR idle on dsb commit
- Remove FBC modulo 4 restriction for ADL-P+
- panic: refactor framebuffer allocation
habanalabs:
- debug/visibility improvements
- vmalloc-backed coherent mmap support
- HLDIO infrastructure
nova-core:
- various register!() macro improvements
- minor vbios/firmware fixes/refactoring
- advance firmware boot stages; process Booter and patch signatures
- process GSP and GSP bootloader
- Add r570.144 firmware bindings and update to it
- Move GSP boot code to own module
- Use new pin-init features to store driver's private data in a
single allocation
- Update ARef import from sync::aref
nova-drm:
- Update ARef import from sync::aref
tyr:
- initial driver skeleton for a rust driver for ARM Mali GPUs
- capable of powering up, query metadata and provide it to userspace.
msm:
- GPU and Core:
- in DT bindings describe clocks per GPU type
- GMU bandwidth voting for x1-85
- a623/a663 speedbins
- cleanup some remaining no-iommu leftovers after VM_BIND conversion
- fix GEM obj 32b size truncation
- add missing VM_BIND param validation
- IFPC for x1-85 and a750
- register xml and gen_header.py sync from mesa
- Display:
- add missing bindings for display on SC8180X
- added DisplayPort MST bindings
- conversion from round_rate() to determine_rate()
amdxdna:
- add IOCTL_AMDXDNA_GET_ARRAY
- support user space allocated buffers
- streamline PM interfaces
- Refactoring wrt. hardware contexts
- improve error reporting
nouveau:
- use GSP firmware by default
- improve error reporting
- Pre-populate exported buffers
ast:
- Clean up detection of DRAM config
exynos:
- add DSIM bridge driver support for Exynos7870
- Document Exynos7870 DSIM compatible in dt-binding
panthor:
- Print task/pid on errors
- Add support for Mali G710, G510, G310, Gx15, Gx20, Gx25
- Improve cache flushing
- Fail VM bind if BO has offset
renesas:
- convert to RUNTIME_PM_OPS
rcar-du:
- Make number of lanes configurable
- Use RUNTIME_PM_OPS
- Add support for DSI commands
rocket:
- Add driver for Rockchip NPU plus DT bindings
- Use kfree() and sizeof() correctly
- Test DMA status
rockchip:
- dsi2: Add support for RK3576 plus DT bindings
- Add support for RK3588 DPTX output
tidss:
- Use crtc_ fields for programming display mode
- Remove other drivers from aperture
pixpaper:
- Add support for Mayqueen Pixpaper plus DT bindings
v3d:
- Support querying nubmer of GPU resets for KHR_robustness
stm:
- Clean up logging
- ltdc: Add support support for STM32MP257F-EV1 plus DT bindings
sitronix:
- st7571-i2c: Add support for inverted displays and 2-bit grayscale
tidss:
- Convert to kernel's FIELD_ macros
vesadrm:
- Support 8-bit palette mode
imagination:
- Improve power management
- Add support for TH1520 GPU
- Support Risc-V architectures
v3d:
- Improve job management and locking
vkms:
- Support variants of ARGB8888, ARGB16161616, RGB565, RGB888 and P01x
- Spport YUV with 16-bit components"
* tag 'drm-next-2025-10-01' of https://gitlab.freedesktop.org/drm/kernel: (1455 commits)
drm/amd: Add name to modes from amdgpu_connector_add_common_modes()
drm/amd: Drop some common modes from amdgpu_connector_add_common_modes()
drm/amdgpu: update MODULE_PARM_DESC for freesync_video
drm/amd: Use dynamic array size declaration for amdgpu_connector_add_common_modes()
drm/amd/display: Share dce100_validate_global with DCE6-8
drm/amd/display: Share dce100_validate_bandwidth with DCE6-8
drm/amdgpu: Fix fence signaling race condition in userqueue
amd/amdkfd: enhance kfd process check in switch partition
amd/amdkfd: resolve a race in amdgpu_amdkfd_device_fini_sw
drm/amd/display: Reject modes with too high pixel clock on DCE6-10
drm/amd: Drop unnecessary check in amdgpu_connector_add_common_modes()
drm/amd/display: Only enable common modes for eDP and LVDS
drm/amdgpu: remove the redeclaration of variable i
drm/amdgpu/userq: assign an error code for invalid userq va
drm/amdgpu: revert "rework reserved VMID handling" v2
drm/amdgpu: remove leftover from enforcing isolation by VMID
drm/amdgpu: Add fallback to pipe reset if KCQ ring reset fails
accel/habanalabs: add Infineon version check
accel/habanalabs/gaudi2: read preboot status after recovering from dirty state
accel/habanalabs: add HL_GET_P_STATE passthrough type
...
|
||
|
Linus Torvalds
|
05a54fa773 |
Merge tag 'sound-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It's been relatively calm in this cycle from the feature POV, but
there were lots of cleanup works in the wide-range of code for
converting with the auto-cleanup macros like guard().
The mostly user-visible changes are the support of a couple of new
compress-offload API extensions, and the support of new ASoC codec /
platform drivers as well as USB-audio quirks.
Here we go with some highlights:
Core:
- Compress-offload API extension for 64bit timestamp support
- Compress-offload API extension for OPUS codec support
- Workaround for PCM locking issue with PREEMPT_RT and softirq
- KCSAN warning fix for ALSA sequencer core
ASoC:
- Continued cleanup works for ASoC core APIs
- Lots of cleanups and conversions of DT bindings
- Substantial maintainance work on the Intel AVS drivers
- Support for Qualcomm Glymur and PM4125, Realtek RT1321, Shanghai
FourSemi FS2104/5S, Texas Instruments PCM1754 and TAS2783A
- Remove support for TI WL1273 for old Nokia systems
USB-audio:
- Support for Tascam US-144mkII, Presonus S1824c support
- More flexible quirk option handling
- Fix for USB MIDI timer bug triggered by fuzzer
Others:
- A large series of cleanups with guard() & co macros over (non-ASoC)
sound drivers (PCI, ISA, HD-audio, USB-audio, drivers, etc)
- TAS5825 HD-audio side-codec support"
* tag 'sound-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (454 commits)
ALSA: usb-audio: don't hardcode gain for output channel of Presonus Studio
ALSA: usb-audio: add the initial mix for Presonus Studio 1824c
ALSA: doc: improved docs about quirk_flags in snd-usb-audio
ALSA: usb-audio: make param quirk_flags change-able in runtime
ALSA: usb-audio: improve module param quirk_flags
ALSA: usb-audio: add two-way convert between name and bit for QUIRK_FLAG_*
ALSA: usb-audio: fix race condition to UAF in snd_usbmidi_free
ALSA: usb-audio: add mono main switch to Presonus S1824c
ALSA: compress: document 'chan_map' member in snd_dec_opus
ASoC: cs35l56: Add support for CS35L56 B2 silicon
ASoC: cs35l56: Set fw_regs table after getting REVID
ALSA: hda/realtek: Add quirk for HP Spectre 14t-ea100
ASoc: tas2783A: Fix an error code in probe()
ASoC: tlv320aic3x: Fix class-D initialization for tlv320aic3007
ASoC: qcom: sc8280xp: use sa8775p/ subdir for QCS9100 / QCS9075
ASoC: stm32: sai: manage context in set_sysclk callback
ASoC: renesas: msiof: ignore 1st FSERR
ASoC: renesas: msiof: Add note for The possibility of R/L opposite Capture
ASoC: renesas: msiof: setup both (Playback/Capture) in the same time
ASoC: renesas: msiof: tidyup DMAC stop timing
...
|
||
|
Linus Torvalds
|
5832d26433 |
Merge tag 'for-6.18/io_uring-20250929' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring updates from Jens Axboe:
- Store ring provided buffers locally for the users, rather than stuff
them into struct io_kiocb.
These types of buffers must always be fully consumed or recycled in
the current context, and leaving them in struct io_kiocb is hence not
a good ideas as that struct has a vastly different life time.
Basically just an architecture cleanup that can help prevent issues
with ring provided buffers in the future.
- Support for mixed CQE sizes in the same ring.
Before this change, a CQ ring either used the default 16b CQEs, or it
was setup with 32b CQE using IORING_SETUP_CQE32. For use cases where
a few 32b CQEs were needed, this caused everything else to use big
CQEs. This is wasteful both in terms of memory usage, but also memory
bandwidth for the posted CQEs.
With IORING_SETUP_CQE_MIXED, applications may use request types that
post both normal 16b and big 32b CQEs on the same ring.
- Add helpers for async data management, to make it harder for opcode
handlers to mess it up.
- Add support for multishot for uring_cmd, which ublk can use. This
helps improve efficiency, by providing a persistent request type that
can trigger multiple CQEs.
- Add initial support for ring feature querying.
We had basic support for probe operations, but the API isn't great.
Rather than expand that, add support for QUERY which is easily
expandable and can cover a lot more cases than the existing probe
support. This will help applications get a better idea of what
operations are supported on a given host.
- zcrx improvements from Pavel:
- Improve refill entry alignment for better caching
- Various cleanups, especially around deduplicating normal
memory vs dmabuf setup.
- Generalisation of the niov size (Patch 12). It's still hard
coded to PAGE_SIZE on init, but will let the user to specify
the rx buffer length on setup.
- Syscall / synchronous bufer return. It'll be used as a slow
fallback path for returning buffers when the refill queue is
full. Useful for tolerating slight queue size misconfiguration
or with inconsistent load.
- Accounting more memory to cgroups.
- Additional independent cleanups that will also be useful for
mutli-area support.
- Various fixes and cleanups
* tag 'for-6.18/io_uring-20250929' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (68 commits)
io_uring/cmd: drop unused res2 param from io_uring_cmd_done()
io_uring: fix nvme's 32b cqes on mixed cq
io_uring/query: cap number of queries
io_uring/query: prevent infinite loops
io_uring/zcrx: account niov arrays to cgroup
io_uring/zcrx: allow synchronous buffer return
io_uring/zcrx: introduce io_parse_rqe()
io_uring/zcrx: don't adjust free cache space
io_uring/zcrx: use guards for the refill lock
io_uring/zcrx: reduce netmem scope in refill
io_uring/zcrx: protect netdev with pp_lock
io_uring/zcrx: rename dma lock
io_uring/zcrx: make niov size variable
io_uring/zcrx: set sgt for umem area
io_uring/zcrx: remove dmabuf_offset
io_uring/zcrx: deduplicate area mapping
io_uring/zcrx: pass ifq to io_zcrx_alloc_fallback()
io_uring/zcrx: check all niovs filled with dma addresses
io_uring/zcrx: move area reg checks into io_import_area
io_uring/zcrx: don't pass slot to io_zcrx_create_area
...
|
||
|
Linus Torvalds
|
38057e3236 |
Merge tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann: "Lots of platform specific updates for Qualcomm SoCs, including a new TEE subsystem driver for the Qualcomm QTEE firmware interface. Added support for the Apple A11 SoC in drivers that are shared with the M1/M2 series, among more updates for those. Smaller platform specific driver updates for Renesas, ASpeed, Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale SoCs. Driver updates in the cache controller, memory controller and reset controller subsystems. SCMI firmware updates to add more features and improve robustness. This includes support for having multiple SCMI providers in a single system. TEE subsystem support for protected DMA-bufs, allowing hardware to access memory areas that managed by the kernel but remain inaccessible from the CPU in EL1/EL0" * tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits) soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu() soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver soc: fsl: qe: Change GPIO driver to a proper platform driver tee: fix register_shm_helper() pmdomain: apple: Add "apple,t8103-pmgr-pwrstate" dt-bindings: spmi: Add Apple A11 and T2 compatible serial: qcom-geni: Load UART qup Firmware from linux side spi: geni-qcom: Load spi qup Firmware from linux side i2c: qcom-geni: Load i2c qup Firmware from linux side soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem soc: qcom: geni-se: Cleanup register defines and update copyright dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus Documentation: tee: Add Qualcomm TEE driver tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl tee: qcom: add primordial object tee: add Qualcomm TEE driver tee: increase TEE_MAX_ARG_SIZE to 4096 tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF tee: add close_context to TEE driver operation ... |
||
|
Linus Torvalds
|
ea1c6c5925 |
Merge tag 'spi-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"There's one big core change in this release, Jonas Gorski has
addressed the issues with multiple chip selects which makes things
more robust and stable. Otherwise there's quite a bit of driver work,
as well as some new drivers several existing drivers have had quite a
bit of work done on them.
Possibly the most interesting thing is the VirtIO driver, this is
apparently useful for some automotive applications which want to keep
as small and robust a host system as they can, moving less critical
functionality into guests.
- James Clark has done some substantial updates on the Freescale DSPI
driver, porting in code from the BSP and building onm top of that
to fix some bugs and increase performance
- Jonas Gorski has fixed the issues with handling multple chip
selects, making things more robust and scalable
- Support for higher performance modes in the NXP FSPI driver from
Haibo Chen
- Removal of the obsolete S3C2443 driver, the underlying SoC support
has been removed from the kernel
- Support for Amlogic AL113L2, Atmel SAMA7D65 and SAM9x7 and for
VirtIO controllers"
* tag 'spi-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (74 commits)
spi: ljca: Remove Wentong's e-mail address
spi: rename SPI_CS_CNT_MAX => SPI_DEVICE_CS_CNT_MAX
spi: reduce device chip select limit again
spi: don't check spi_controller::num_chipselect when parsing a dt device
spi: drop check for validity of device chip selects
spi: move unused device CS initialization to __spi_add_device()
spi: keep track of number of chipselects in spi_device
spi: fix return code when spi device has too many chipselects
SPI: Add virtio SPI driver
virtio-spi: Add virtio-spi.h
virtio: Add ID for virtio SPI
spi: rpc-if: Add resume support for RZ/G3E
spi: rpc-if: Drop deprecated SIMPLE_DEV_PM_OPS
spi: spi-qpic-snand: simplify clock handling by using devm_clk_get_enabled()
spi: spi-nxp-fspi: Add OCT-DTR mode support
spi: spi-nxp-fspi: add the support for sample data from DQS pad
spi: spi-nxp-fspi: Add the DDR LUT command support
spi: spi-nxp-fspi: set back to dll override mode when clock rate < 100MHz
spi: spi-nxp-fspi: extract function nxp_fspi_dll_override()
spi: atmel-quadspi: Add support for sama7d65 QSPI
...
|
||
|
Linus Torvalds
|
989253cc46 |
Merge tag 'hwmon-for-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck: "New drivers: - Kontron SMARC-sAM67 - GPD device sensors - MP29502 - MP2869, MP29608, MP29612 and MP29816 series Added chip support to existing drivers: - asus-ec-sensors: Add B650E-I Add PRIME Z270-A Add Pro WS WRX90E-SAGE SE Add ROG STRIX X670E-E GAMING WIFI Add ROG STRIX X870-I GAMING WIFI Add ROG STRIX X870E-E GAMING WIFI Add ROG STRIX Z690-E GAMING WIFI Add ROG STRIX Z790E GAMING WIFI II Add STRIX B850-I GAMING WIFI Add TUF GAMING X670E PLUS WIFI Add X670E-I GAMING WIFI Add Z790-I GAMING WIFI - dell-smm: Add support for Dell OptiPlex 7040 - ina238: Major cleanup, and Add support for INA700 Add support for INA780 - k10temp: Add device ID for Strix Halo Add support for AMD Family 1Ah-based models - lenovo-ec-sensors: Update P8 supprt - lm75: Add NXP P3T1750 support - pmbus/adm1275: Add sq24905c support - pmbus/isl68137: Add support for Renesas RAA228244 and RAA228246 - pmbus/mp5990: Add support for MP5998 - sht21: Add support for SHT20, SHT25 - sl28cpld: Add sa67mcu compatible Other notable changes: - core: Handle locking internally Introduce 64-bit energy attribute support - cros_ec: Register into thermal framework, improve PWM control - lm75: allow interrupt for ti,tmp75 - mlxreg-fan: Add support for new flavour of capability register - sbtsi_temp: AMD CPU extended temperature range support - sht21: Add devicetree support Various other minor improvements and fixes" * tag 'hwmon-for-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (86 commits) dt-bindings: hwmon: (lm75) allow interrupt for ti,tmp75 hwmon: (mlxreg-fan) Add support for new flavour of capability register hwmon: (mlxreg-fan) Separate methods of fan setting coming from different subsystems hwmon: (cros_ec) register fans into thermal framework cooling devices hwmon: (cros_ec) add PWM control over fans platform/chrome: update pwm fan control host commands hwmon: add SMARC-sAM67 support dt-bindings: hwmon: sl28cpld: add sa67mcu compatible hwmon: (asus-ec-sensors) add TUF GAMING X670E PLUS WIFI hwmon: (dell-smm) Add support for Dell OptiPlex 7040 hwmon: (dell-smm) Add support for automatic fan mode hwmon: (gpd-fan) complete Kconfig dependencies hwmon: (asus-ec-sensors) increase timeout for locking ACPI mutex hwmon: (asus-ec-sensors) add ROG STRIX X870E-E GAMING WIFI hwmon: (dell-smm) Move clamping of fan speed out of i8k_set_fan() hwmon: (dell-smm) Remove Dell Precision 490 custom config data hwmon: (asus-ec-sensors) add ROG STRIX X670E-E GAMING WIFI hwmon: (gpd-fan) Fix range check for pwm input hwmon: (pmbus/mp5990) add support for MP5998 dt-bindings: trivial-devices: add mps,mp5998 ... |
||
|
Paolo Abeni
|
1a98f5699b |
Revert "Documentation: net: add flow control guide and document ethtool API"
This reverts commit
|
||
|
Linus Torvalds
|
ae28ed4578 |
Merge tag 'bpf-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov: - Support pulling non-linear xdp data with bpf_xdp_pull_data() kfunc (Amery Hung) Applied as a stable branch in bpf-next and net-next trees. - Support reading skb metadata via bpf_dynptr (Jakub Sitnicki) Also a stable branch in bpf-next and net-next trees. - Enforce expected_attach_type for tailcall compatibility (Daniel Borkmann) - Replace path-sensitive with path-insensitive live stack analysis in the verifier (Eduard Zingerman) This is a significant change in the verification logic. More details, motivation, long term plans are in the cover letter/merge commit. - Support signed BPF programs (KP Singh) This is another major feature that took years to materialize. Algorithm details are in the cover letter/marge commit - Add support for may_goto instruction to s390 JIT (Ilya Leoshkevich) - Add support for may_goto instruction to arm64 JIT (Puranjay Mohan) - Fix USDT SIB argument handling in libbpf (Jiawei Zhao) - Allow uprobe-bpf program to change context registers (Jiri Olsa) - Support signed loads from BPF arena (Kumar Kartikeya Dwivedi and Puranjay Mohan) - Allow access to union arguments in tracing programs (Leon Hwang) - Optimize rcu_read_lock() + migrate_disable() combination where it's used in BPF subsystem (Menglong Dong) - Introduce bpf_task_work_schedule*() kfuncs to schedule deferred execution of BPF callback in the context of a specific task using the kernel’s task_work infrastructure (Mykyta Yatsenko) - Enforce RCU protection for KF_RCU_PROTECTED kfuncs (Kumar Kartikeya Dwivedi) - Add stress test for rqspinlock in NMI (Kumar Kartikeya Dwivedi) - Improve the precision of tnum multiplier verifier operation (Nandakumar Edamana) - Use tnums to improve is_branch_taken() logic (Paul Chaignon) - Add support for atomic operations in arena in riscv JIT (Pu Lehui) - Report arena faults to BPF error stream (Puranjay Mohan) - Search for tracefs at /sys/kernel/tracing first in bpftool (Quentin Monnet) - Add bpf_strcasecmp() kfunc (Rong Tao) - Support lookup_and_delete_elem command in BPF_MAP_STACK_TRACE (Tao Chen) * tag 'bpf-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (197 commits) libbpf: Replace AF_ALG with open coded SHA-256 selftests/bpf: Add stress test for rqspinlock in NMI selftests/bpf: Add test case for different expected_attach_type bpf: Enforce expected_attach_type for tailcall compatibility bpftool: Remove duplicate string.h header bpf: Remove duplicate crypto/sha2.h header libbpf: Fix error when st-prefix_ops and ops from differ btf selftests/bpf: Test changing packet data from kfunc selftests/bpf: Add stacktrace map lookup_and_delete_elem test case selftests/bpf: Refactor stacktrace_map case with skeleton bpf: Add lookup_and_delete_elem for BPF_MAP_STACK_TRACE selftests/bpf: Fix flaky bpf_cookie selftest selftests/bpf: Test changing packet data from global functions with a kfunc bpf: Emit struct bpf_xdp_sock type in vmlinux BTF selftests/bpf: Task_work selftest cleanup fixes MAINTAINERS: Delete inactive maintainers from AF_XDP bpf: Mark kfuncs as __noclone selftests/bpf: Add kprobe multi write ctx attach test selftests/bpf: Add kprobe write ctx attach test selftests/bpf: Add uprobe context ip register change test ... |
||
|
Linus Torvalds
|
22bdd6e68b |
Merge tag 'x86_apic_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV and apic updates from Borislav Petkov: - Add functionality to provide runtime firmware updates for the non-x86 parts of an AMD platform like the security processor (ASP) firmware, modules etc, for example. The intent being that these updates are interim, live fixups before a proper BIOS update can be attempted - Add guest support for AMD's Secure AVIC feature which gives encrypted guests the needed protection against a malicious hypervisor generating unexpected interrupts and injecting them into such guest, thus interfering with its operation in an unexpected and negative manner. The advantage of this scheme is that the guest determines which interrupts and when to accept them vs leaving that to the benevolence (or not) of the hypervisor - Strictly separate the startup code from the rest of the kernel where former is executed from the initial 1:1 mapping of memory. The problem was that the toolchain-generated version of the code was being executed from a different mapping of memory than what was "assumed" during code generation, needing an ever-growing pile of fixups for absolute memory references which are invalid in the early, 1:1 memory mapping during boot. The major advantage of this is that there's no need to check the 1:1 mapping portion of the code for absolute relocations anymore and get rid of the RIP_REL_REF() macro sprinkling all over the place. For more info, see Ard's very detailed writeup on this [1] - The usual cleanups and fixes Link: https://lore.kernel.org/r/CAMj1kXEzKEuePEiHB%2BHxvfQbFz0sTiHdn4B%2B%2BzVBJ2mhkPkQ4Q@mail.gmail.com [1] * tag 'x86_apic_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (49 commits) x86/boot: Drop erroneous __init annotation from early_set_pages_state() crypto: ccp - Add AMD Seamless Firmware Servicing (SFS) driver crypto: ccp - Add new HV-Fixed page allocation/free API x86/sev: Add new dump_rmp parameter to snp_leak_pages() API x86/startup/sev: Document the CPUID flow in the boot #VC handler objtool: Ignore __pi___cfi_ prefixed symbols x86/sev: Zap snp_abort() x86/apic/savic: Do not use snp_abort() x86/boot: Get rid of the .head.text section x86/boot: Move startup code out of __head section efistub/x86: Remap inittext read-execute when needed x86/boot: Create a confined code area for startup code x86/kbuild: Incorporate boot/startup/ via Kbuild makefile x86/boot: Revert "Reject absolute references in .head.text" x86/boot: Check startup code for absence of absolute relocations objtool: Add action to check for absence of absolute relocations x86/sev: Export startup routines for later use x86/sev: Move __sev_[get|put]_ghcb() into separate noinstr object x86/sev: Provide PIC aliases for SEV related data objects x86/boot: Provide PIC aliases for 5-level paging related constants ... |
||
|
Linus Torvalds
|
56a0810d8c |
Merge tag 'audit-pr-20250926' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore: - Proper audit support for multiple LSMs As the audit subsystem predated the work to enable multiple LSMs, some additional work was needed to support logging the different LSM labels for the subjects/tasks and objects on the system. Casey's patches add new auxillary records for subjects and objects that convey the additional labels. - Ensure fanotify audit events are always generated Generally speaking security relevant subsystems always generate audit events, unless explicitly ignored. However, up to this point fanotify events had been ignored by default, but starting with this pull request fanotify follows convention and generates audit events by default. - Replace an instance of strcpy() with strscpy() - Minor indentation, style, and comment fixes * tag 'audit-pr-20250926' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: fix skb leak when audit rate limit is exceeded audit: init ab->skb_list earlier in audit_buffer_alloc() audit: add record for multiple object contexts audit: add record for multiple task security contexts lsm: security_lsmblob_to_secctx module selection audit: create audit_stamp structure audit: add a missing tab audit: record fanotify event regardless of presence of rules audit: fix typo in auditfilter.c comment audit: Replace deprecated strcpy() with strscpy() audit: fix indentation in audit_log_exit() |
||
|
Oleksij Rempel
|
7bd80ed89d |
Documentation: net: add flow control guide and document ethtool API
Introduce a new document, flow_control.rst, to provide a comprehensive guide on Ethernet Flow Control in Linux. The guide explains how flow control works, how autonegotiation resolves pause capabilities, and how to configure it using ethtool and Netlink. In parallel, document the pause and pause-stat attributes in the ethtool.yaml netlink spec. This enables the ynl tool to generate kernel-doc comments for the corresponding enums in the UAPI header, making the C interface self-documenting. Finally, replace the legacy flow control section in phy.rst with a reference to the new document and add pointers in the relevant C source files. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/20250924120241.724850-1-o.rempel@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Ivan Vecera
|
a680581f6a |
dpll: add phase-offset-avg-factor device attribute to netlink spec
Add dpll device level attribute DPLL_A_PHASE_OFFSET_AVG_FACTOR to allow control over a calculation of reported phase offset value. Attribute is present, if the driver provides such capability, otherwise attribute shall not be present. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://patch.msgid.link/20250927084912.2343597-2-ivecera@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Linus Torvalds
|
18b19abc37 |
Merge tag 'namespace-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull namespace updates from Christian Brauner: "This contains a larger set of changes around the generic namespace infrastructure of the kernel. Each specific namespace type (net, cgroup, mnt, ...) embedds a struct ns_common which carries the reference count of the namespace and so on. We open-coded and cargo-culted so many quirks for each namespace type that it just wasn't scalable anymore. So given there's a bunch of new changes coming in that area I've started cleaning all of this up. The core change is to make it possible to correctly initialize every namespace uniformly and derive the correct initialization settings from the type of the namespace such as namespace operations, namespace type and so on. This leaves the new ns_common_init() function with a single parameter which is the specific namespace type which derives the correct parameters statically. This also means the compiler will yell as soon as someone does something remotely fishy. The ns_common_init() addition also allows us to remove ns_alloc_inum() and drops any special-casing of the initial network namespace in the network namespace initialization code that Linus complained about. Another part is reworking the reference counting. The reference counting was open-coded and copy-pasted for each namespace type even though they all followed the same rules. This also removes all open accesses to the reference count and makes it private and only uses a very small set of dedicated helpers to manipulate them just like we do for e.g., files. In addition this generalizes the mount namespace iteration infrastructure introduced a few cycles ago. As reminder, the vfs makes it possible to iterate sequentially and bidirectionally through all mount namespaces on the system or all mount namespaces that the caller holds privilege over. This allow userspace to iterate over all mounts in all mount namespaces using the listmount() and statmount() system call. Each mount namespace has a unique identifier for the lifetime of the systems that is exposed to userspace. The network namespace also has a unique identifier working exactly the same way. This extends the concept to all other namespace types. The new nstree type makes it possible to lookup namespaces purely by their identifier and to walk the namespace list sequentially and bidirectionally for all namespace types, allowing userspace to iterate through all namespaces. Looking up namespaces in the namespace tree works completely locklessly. This also means we can move the mount namespace onto the generic infrastructure and remove a bunch of code and members from struct mnt_namespace itself. There's a bunch of stuff coming on top of this in the future but for now this uses the generic namespace tree to extend a concept introduced first for pidfs a few cycles ago. For a while now we have supported pidfs file handles for pidfds. This has proven to be very useful. This extends the concept to cover namespaces as well. It is possible to encode and decode namespace file handles using the common name_to_handle_at() and open_by_handle_at() apis. As with pidfs file handles, namespace file handles are exhaustive, meaning it is not required to actually hold a reference to nsfs in able to decode aka open_by_handle_at() a namespace file handle. Instead the FD_NSFS_ROOT constant can be passed which will let the kernel grab a reference to the root of nsfs internally and thus decode the file handle. Namespaces file descriptors can already be derived from pidfds which means they aren't subject to overmount protection bugs. IOW, it's irrelevant if the caller would not have access to an appropriate /proc/<pid>/ns/ directory as they could always just derive the namespace based on a pidfd already. It has the same advantage as pidfds. It's possible to reliably and for the lifetime of the system refer to a namespace without pinning any resources and to compare them trivially. Permission checking is kept simple. If the caller is located in the namespace the file handle refers to they are able to open it otherwise they must hold privilege over the owning namespace of the relevant namespace. The namespace file handle layout is exposed as uapi and has a stable and extensible format. For now it simply contains the namespace identifier, the namespace type, and the inode number. The stable format means that userspace may construct its own namespace file handles without going through name_to_handle_at() as they are already allowed for pidfs and cgroup file handles" * tag 'namespace-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (65 commits) ns: drop assert ns: move ns type into struct ns_common nstree: make struct ns_tree private ns: add ns_debug() ns: simplify ns_common_init() further cgroup: add missing ns_common include ns: use inode initializer for initial namespaces selftests/namespaces: verify initial namespace inode numbers ns: rename to __ns_ref nsfs: port to ns_ref_*() helpers net: port to ns_ref_*() helpers uts: port to ns_ref_*() helpers ipv4: use check_net() net: use check_net() net-sysfs: use check_net() user: port to ns_ref_*() helpers time: port to ns_ref_*() helpers pid: port to ns_ref_*() helpers ipc: port to ns_ref_*() helpers cgroup: port to ns_ref_*() helpers ... |
||
|
Linus Torvalds
|
b7ce6fa90f |
Merge tag 'vfs-6.18-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual selections of misc updates for this cycle.
Features:
- Add "initramfs_options" parameter to set initramfs mount options.
This allows to add specific mount options to the rootfs to e.g.,
limit the memory size
- Add RWF_NOSIGNAL flag for pwritev2()
Add RWF_NOSIGNAL flag for pwritev2. This flag prevents the SIGPIPE
signal from being raised when writing on disconnected pipes or
sockets. The flag is handled directly by the pipe filesystem and
converted to the existing MSG_NOSIGNAL flag for sockets
- Allow to pass pid namespace as procfs mount option
Ever since the introduction of pid namespaces, procfs has had very
implicit behaviour surrounding them (the pidns used by a procfs
mount is auto-selected based on the mounting process's active
pidns, and the pidns itself is basically hidden once the mount has
been constructed)
This implicit behaviour has historically meant that userspace was
required to do some special dances in order to configure the pidns
of a procfs mount as desired. Examples include:
* In order to bypass the mnt_too_revealing() check, Kubernetes
creates a procfs mount from an empty pidns so that user
namespaced containers can be nested (without this, the nested
containers would fail to mount procfs)
But this requires forking off a helper process because you cannot
just one-shot this using mount(2)
* Container runtimes in general need to fork into a container
before configuring its mounts, which can lead to security issues
in the case of shared-pidns containers (a privileged process in
the pidns can interact with your container runtime process)
While SUID_DUMP_DISABLE and user namespaces make this less of an
issue, the strict need for this due to a minor uAPI wart is kind
of unfortunate
Things would be much easier if there was a way for userspace to
just specify the pidns they want. So this pull request contains
changes to implement a new "pidns" argument which can be set
using fsconfig(2):
fsconfig(procfd, FSCONFIG_SET_FD, "pidns", NULL, nsfd);
fsconfig(procfd, FSCONFIG_SET_STRING, "pidns", "/proc/self/ns/pid", 0);
or classic mount(2) / mount(8):
// mount -t proc -o pidns=/proc/self/ns/pid proc /tmp/proc
mount("proc", "/tmp/proc", "proc", MS_..., "pidns=/proc/self/ns/pid");
Cleanups:
- Remove the last references to EXPORT_OP_ASYNC_LOCK
- Make file_remove_privs_flags() static
- Remove redundant __GFP_NOWARN when GFP_NOWAIT is used
- Use try_cmpxchg() in start_dir_add()
- Use try_cmpxchg() in sb_init_done_wq()
- Replace offsetof() with struct_size() in ioctl_file_dedupe_range()
- Remove vfs_ioctl() export
- Replace rwlock() with spinlock in epoll code as rwlock causes
priority inversion on preempt rt kernels
- Make ns_entries in fs/proc/namespaces const
- Use a switch() statement() in init_special_inode() just like we do
in may_open()
- Use struct_size() in dir_add() in the initramfs code
- Use str_plural() in rd_load_image()
- Replace strcpy() with strscpy() in find_link()
- Rename generic_delete_inode() to inode_just_drop() and
generic_drop_inode() to inode_generic_drop()
- Remove unused arguments from fcntl_{g,s}et_rw_hint()
Fixes:
- Document @name parameter for name_contains_dotdot() helper
- Fix spelling mistake
- Always return zero from replace_fd() instead of the file descriptor
number
- Limit the size for copy_file_range() in compat mode to prevent a
signed overflow
- Fix debugfs mount options not being applied
- Verify the inode mode when loading it from disk in minixfs
- Verify the inode mode when loading it from disk in cramfs
- Don't trigger automounts with RESOLVE_NO_XDEV
If openat2() was called with RESOLVE_NO_XDEV it didn't traverse
through automounts, but could still trigger them
- Add FL_RECLAIM flag to show_fl_flags() macro so it appears in
tracepoints
- Fix unused variable warning in rd_load_image() on s390
- Make INITRAMFS_PRESERVE_MTIME depend on BLK_DEV_INITRD
- Use ns_capable_noaudit() when determining net sysctl permissions
- Don't call path_put() under namespace semaphore in listmount() and
statmount()"
* tag 'vfs-6.18-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (38 commits)
fcntl: trim arguments
listmount: don't call path_put() under namespace semaphore
statmount: don't call path_put() under namespace semaphore
pid: use ns_capable_noaudit() when determining net sysctl permissions
fs: rename generic_delete_inode() and generic_drop_inode()
init: INITRAMFS_PRESERVE_MTIME should depend on BLK_DEV_INITRD
initramfs: Replace strcpy() with strscpy() in find_link()
initrd: Use str_plural() in rd_load_image()
initramfs: Use struct_size() helper to improve dir_add()
initrd: Fix unused variable warning in rd_load_image() on s390
fs: use the switch statement in init_special_inode()
fs/proc/namespaces: make ns_entries const
filelock: add FL_RECLAIM to show_fl_flags() macro
eventpoll: Replace rwlock with spinlock
selftests/proc: add tests for new pidns APIs
procfs: add "pidns" mount option
pidns: move is-ancestor logic to helper
openat2: don't trigger automounts with RESOLVE_NO_XDEV
namei: move cross-device check to __traverse_mounts
namei: remove LOOKUP_NO_XDEV check from handle_mounts
...
|
||
|
Takashi Iwai
|
6b9c4a05ae |
Merge tag 'asoc-v6.18-2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.18 round 2 Some more updates for v6.18, mostly fixes for the earlier pull request with some cleanups and more minor fixes for older code. We do have one new driver, the TI TAS2783A, and some quirks for new platforms. |
||
|
Kriish Sharma
|
fa7d16734f |
ALSA: compress: document 'chan_map' member in snd_dec_opus
When building kernel docs, the following warning appeared:
WARNING: ./include/uapi/sound/compress_params.h:364
struct member 'chan_map' not described in 'snd_dec_opus'
The inline struct 'snd_dec_opus_ch_map' inside 'snd_dec_opus' was not
properly documented. This patch documents the 'chan_map' member and its
fields (stream_count, coupled_count, channel_map), resolving the warning.
Fixes:
|
||
|
Matthieu Baerts (NGI0)
|
539f6b9de3 |
mptcp: pm: in-kernel: add laminar endpoints
Currently, upon the reception of an ADD_ADDR (and when the fullmesh flag is not used), the in-kernel PM will create new subflows using the local address the routing configuration will pick. It would be easier to pick local addresses from a selected list of endpoints, and use it only once, than relying on routing rules. Use case: both the client (C) and the server (S) have two addresses (a and b). The client establishes the connection between C(a) and S(a). Once established, the server announces its additional address S(b). Once received, the client connects to it using its second address C(b). Compared to a situation without the 'laminar' endpoint for C(b), the client didn't use this address C(b) to establish a subflow to the server's primary address S(a). So at the end, we have: C S C(a) --- S(a) C(b) --- S(b) In case of a 3rd address on each side (C(c) and S(c)), upon the reception of an ADD_ADDR with S(c), the client should not pick C(b) because it has already been used. C(c) should then be used. Note that this situation is currently possible if C doesn't add any endpoint, but configure the routing in order to pick C(b) for the route to S(b), and pick C(c) for the route to S(c). That doesn't sound very practical because it means knowing in advance the IP addresses that will be used and announced by the server. 'laminar', like the idea of laminar flows: the different subflows don't mix with each other on an endpoint, unlike the "turbulent" way traffic is mixed by 'fullmesh'. In the code, the new endpoint type is added. Similar to the other subflow types, an MPTCP_INFO counter is added. While at it, hole are now commented in struct mptcp_info, to remember next time that these holes can no longer be used. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/503 Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-15-ad126cc47c6b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Matthieu Baerts (NGI0)
|
e7757b6d3a |
mptcp: pm: in-kernel: rename 'local_addr_max' to 'endp_subflow_max'
A few variables linked to the in-kernel Path-Manager are confusing, and it would help current and future developers, to clarify them. One of them is 'local_addr_max', which in fact represents the maximum number of 'subflow' endpoints that can be used to create new subflows, and not the number of local addresses that have been used to create subflows. While at it, add an additional name for the corresponding variable in MPTCP INFO: mptcpi_endp_subflow_max. Not to break the current uAPI, the new name is added as a 'define' pointing to the former name. This will then also help userspace devs. Also move the variable and function next to the other 'endp_X_max' ones. No functional changes intended. Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-9-ad126cc47c6b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Matthieu Baerts (NGI0)
|
37712d84df |
mptcp: pm: in-kernel: rename 'add_addr_accept_max' to 'limit_add_addr_accepted'
A few variables linked to the in-kernel Path-Manager are confusing, and it would help current and future developers, to clarify them. One of them is 'add_addr_accept_max', which in fact represents the limit of ADD_ADDR that can be accepted: the limit set via 'ip mptcp limit add_addr_accepted X' for example. It is not linked to the maximum number of accepted ADD_ADDR. While at it, add an additional name for the corresponding variable in MPTCP INFO: mptcpi_limit_add_addr_accepted. Not to break the current uAPI, the new name is added as a 'define' pointing to the former name. This will then also help userspace devs. No functional changes intended. Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-8-ad126cc47c6b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Matthieu Baerts (NGI0)
|
45cae57066 |
mptcp: pm: in-kernel: rename 'add_addr_signal_max' to 'endp_signal_max'
A few variables linked to the in-kernel Path-Manager are confusing, and it would help current and future developers, to clarify them. One of them is 'add_addr_signal_max', which in fact represents the maximum number of 'signal' endpoints that can be used to announced addresses, and not the number of ADD_ADDR that can be signalled. While at it, add an additional name for the corresponding variable in MPTCP INFO: mptcpi_endp_signal_max. Not to break the current uAPI, the new name is added as a 'define' pointing to the former name. This will then also help userspace devs. No functional changes intended. Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-7-ad126cc47c6b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Matthieu Baerts (NGI0)
|
3eb3c9a959 |
mptcp: pm: in-kernel: rename 'subflows_max' to 'limit_extra_subflows'
A few variables linked to the in-kernel Path-Manager are confusing, and it would help current and future developers, to clarify them. One of them is 'subflows_max', which in fact represents the limit of extra subflows: the limit set via 'ip mptcp limit subflows X' for example. It is not linked to the maximum number of created / possible subflows. While at it, add an additional name for the corresponding variable in MPTCP INFO: mptcpi_limit_extra_subflows. Not to break the current uAPI, the new name is added as a 'define' pointing to the former name. This will then also help userspace devs. No functional changes intended. Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-6-ad126cc47c6b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Matthieu Baerts (NGI0)
|
c5273f6ca1 |
mptcp: pm: rename 'subflows' to 'extra_subflows'
A few variables linked to the Path-Managers are confusing, and it would help current and future developers, to clarify them. One of them is 'subflows', which in fact represents the number of extra subflows: all the additional subflows created after the initial one, and not the total number of subflows. While at it, add an additional name for the corresponding variable in MPTCP INFO: mptcpi_extra_subflows. Not to break the current uAPI, the new name is added as a 'define' pointing to the former name. This will then also help userspace devs. No functional changes intended. Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-5-ad126cc47c6b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Vadim Fedorenko
|
cc2f081299 |
ethtool: add FEC bins histogram report
IEEE 802.3ck-2022 defines counters for FEC bins and 802.3df-2024 clarifies it a bit further. Implement reporting interface through as addition to FEC stats available in ethtool. Drivers can leave bin counter uninitialized if per-lane values are provided. In this case the core will recalculate summ for the bin. Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Link: https://patch.msgid.link/20250924124037.1508846-2-vadim.fedorenko@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
bb9a242ce5 |
Merge tag 'linux-can-next-for-6.18-20250924' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2025-09-25
this is a pull request of 48 patches for net-next/main, which
supersedes tags/linux-can-next-for-6.18-20250923.
The 1st patch is by Xichao Zhao and converts ns_to_ktime() to
us_to_ktime() in the m_can driver.
Vincent Mailhol contributes 2 patches: Updating the MAINTAINERS and
mailmap files to Vincent's new email address and sorting the includes
in the CAN helper library alphabeticaly.
Stéphane Grosjean's patch modifies all peak CAN drivers and the
mailmap to reflect Stéphane's new email address.
4 patches by Biju Das update the CAN-FD handling in the rcar_canfd
driver.
Followed by 11 patches by Geert Uytterhoeven updating and improving
the rcar_can driver.
Stefan Mätje contributes 2 patches for the esd_usb driver updating the
error messages.
The next 3 patch series are all by Vincent Mailhol: 3 patches to
optimize the size of struct raw_sock and struct uniqframe. 4 patches
which rework the CAN MTU logic as preparation for CAN-XL interfaces.
And finally 20 patches that prepare and refactor the CAN netlink code
for the upcoming CAN-XL support.
* tag 'linux-can-next-for-6.18-20250924' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (48 commits)
can: netlink: add userland error messages
can: dev: add can_get_ctrlmode_str()
can: calc_bittiming: make can_calc_tdco() FD agnostic
can: netlink: make can_tdc_fill_info() FD agnostic
can: netlink: add can_bitrate_const_fill_info()
can: netlink: add can_bittiming_const_fill_info()
can: netlink: add can_bittiming_fill_info()
can: netlink: add can_data_bittiming_get_size()
can: netlink: make can_tdc_get_size() FD agnostic
can: netlink: add can_ctrlmode_changelink()
can: netlink: add can_dtb_changelink()
can: netlink: make can_tdc_changelink() FD agnostic
can: netlink: remove useless check in can_tdc_changelink()
can: netlink: refactor CAN_CTRLMODE_TDC_{AUTO,MANUAL} flag reset logic
can: netlink: add can_validate_databittiming()
can: netlink: add can_validate_tdc()
can: netlink: refactor can_validate_bittiming()
can: netlink: document which symbols are FD specific
can: dev: make can_get_relative_tdco() FD agnostic and move it to bittiming.h
can: dev: move struct data_bittiming_params to linux/can/bittiming.h
...
====================
Link: https://patch.msgid.link/20250925121332.848157-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
||
|
Jakub Kicinski
|
94aced6ed9 |
Merge tag 'wireless-next-2025-09-25' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says: ==================== Quite a bit more things, including pull requests from drivers: - mt76: MLO support, HW restart improvements - rtw88/89: small features, prep for RTL8922DE support - ath10k: GTK rekey fixes - cfg80211/mac80211: - additions for more NAN support - S1G channel representation cleanup * tag 'wireless-next-2025-09-25' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (167 commits) wifi: libertas: add WQ_UNBOUND to alloc_workqueue users Revert "wifi: libertas: WQ_PERCPU added to alloc_workqueue users" wifi: libertas: WQ_PERCPU added to alloc_workqueue users wifi: cfg80211: fix width unit in cfg80211_radio_chandef_valid() wifi: ath11k: HAL SRNG: don't deinitialize and re-initialize again wifi: ath12k: enforce CPU endian format for all QMI data wifi: ath12k: Use 1KB Cache Flush Command for QoS TID Descriptors wifi: ath12k: Fix flush cache failure during RX queue update wifi: ath12k: Add Retry Mechanism for REO RX Queue Update Failures wifi: ath12k: Refactor REO command to use ath12k_dp_rx_tid_rxq wifi: ath12k: Refactor RX TID buffer cleanup into helper function wifi: ath12k: Refactor RX TID deletion handling into helper function wifi: ath12k: Increase DP_REO_CMD_RING_SIZE to 256 wifi: cfg80211: remove IEEE80211_CHAN_{1,2,4,8,16}MHZ flags wifi: rtw89: avoid circular locking dependency in ser_state_run() wifi: rtw89: fix leak in rtw89_core_send_nullfunc() wifi: rtw89: avoid possible TX wait initialization race wifi: rtw89: fix use-after-free in rtw89_core_tx_kick_off_and_wait() wifi: ath12k: Fix peer lookup in ath12k_dp_mon_rx_deliver_msdu() wifi: mac80211: fix Rx packet handling when pubsta information is not available ... ==================== Link: https://patch.msgid.link/20250925232341.4544-3-johannes@sipsolutions.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
203e3beb73 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR (net-6.17-rc8). Conflicts: drivers/net/can/spi/hi311x.c |
||
|
Linus Torvalds
|
4ff71af020 |
Merge tag 'net-6.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from Bluetooth, IPsec and CAN.
No known regressions at this point.
Current release - regressions:
- xfrm: xfrm_alloc_spi shouldn't use 0 as SPI
Previous releases - regressions:
- xfrm: fix offloading of cross-family tunnels
- bluetooth: fix several races leading to UaFs
- dsa: lantiq_gswip: fix FDB entries creation for the CPU port
- eth:
- tun: update napi->skb after XDP process
- mlx: fix UAF in flow counter release
Previous releases - always broken:
- core: forbid FDB status change while nexthop is in a group
- smc: fix warning in smc_rx_splice() when calling get_page()
- can: provide missing ndo_change_mtu(), to prevent buffer overflow.
- eth:
- i40e: fix VF config validation
- broadcom: fix support for PTP_EXTTS_REQUEST2 ioctl"
* tag 'net-6.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (40 commits)
octeontx2-pf: Fix potential use after free in otx2_tc_add_flow()
net: dsa: lantiq_gswip: suppress -EINVAL errors for bridge FDB entries added to the CPU port
net: dsa: lantiq_gswip: move gswip_add_single_port_br() call to port_setup()
libie: fix string names for AQ error codes
net/mlx5e: Fix missing FEC RS stats for RS_544_514_INTERLEAVED_QUAD
net/mlx5: HWS, ignore flow level for multi-dest table
net/mlx5: fs, fix UAF in flow counter release
selftests: fib_nexthops: Add test cases for FDB status change
selftests: fib_nexthops: Fix creation of non-FDB nexthops
nexthop: Forbid FDB status change while nexthop is in a group
net: allow alloc_skb_with_frags() to use MAX_SKB_FRAGS
bnxt_en: correct offset handling for IPv6 destination address
ptp: document behavior of PTP_STRICT_FLAGS
broadcom: fix support for PTP_EXTTS_REQUEST2 ioctl
broadcom: fix support for PTP_PEROUT_DUTY_CYCLE
Bluetooth: MGMT: Fix possible UAFs
Bluetooth: hci_event: Fix UAF in hci_acl_create_conn_sync
Bluetooth: hci_event: Fix UAF in hci_conn_tx_dequeue
Bluetooth: hci_sync: Fix hci_resume_advertising_sync
Bluetooth: Fix build after header cleanup
...
|
||
|
Linus Torvalds
|
93a2744561 |
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin: "virtio,vhost: last minute fixes More small fixes. Most notably this fixes crashes and hangs in vhost-net" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: MAINTAINERS, mailmap: Update address for Peter Hilber virtio_config: clarify output parameters uapi: vduse: fix typo in comment vhost: Take a reference on the task in struct vhost_task. vhost-net: flush batched before enabling notifications Revert "vhost/net: Defer TX queue re-enable until after sendmsg" vhost-net: unbreak busy polling vhost-scsi: fix argument order in tport allocation error message |
||
|
Vincent Mailhol
|
94040a8f48 |
can: netlink: document which symbols are FD specific
The CAN XL netlink interface will also have data bitrate and TDC parameters. The current FD parameters do not have a prefix in their names to differentiate them. Because the netlink interface is part of the UAPI, it is unfortunately not feasible to rename the existing symbols to add an FD_ prefix. The best alternative is to add a comment for each of the symbols to notify the reader of which parts are CAN FD specific. While at it, fix a typo: transiver -> transceiver. Signed-off-by: Vincent Mailhol <mailhol@kernel.org> Link: https://patch.msgid.link/20250923-canxl-netlink-prep-v4-3-e720d28f66fe@kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> |
||
|
Armin Wolf
|
1c1658058c |
hwmon: (dell-smm) Add support for automatic fan mode
Many machines treat fan state 3 as some sort of automatic mode, which is superior to the separate SMM calls for switching to automatic fan mode for two reasons: - the fan control mode can be controlled for each fan separately - the current fan control mode can be retrieved from the BIOS On some machines however, this special fan state does not exist. Fan state 3 acts like a regular fan state on such machines or does not exist at all. Such machines usually use separate SMM calls for enabling/disabling automatic fan control. Add support for it. If the machine supports separate SMM calls for changing the fan control mode, then the other interface is ignored. Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20250917181036.10972-4-W_Armin@gmx.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> |
||
|
Arnd Bergmann
|
ff0bebab77 |
Merge tag 'tee-qcomtee-for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee into soc/drivers
Add Qualcomm TEE driver (QTEE) This introduces a Trusted Execution Environment (TEE) driver for Qualcomm TEE (QTEE). QTEE enables Trusted Applications (TAs) and services to run securely. It uses an object-based interface, where each service is an object with sets of operations. Kernel and userspace services are also available to QTEE through a similar approach. QTEE makes callback requests that are converted into object invocations. These objects can represent services within the kernel or userspace process. We extend the TEE subsystem to understand object parameters and an ioctl call so client can invoke objects in QTEE: - TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF_* - TEE_IOC_OBJECT_INVOKE The existing ioctl calls TEE_IOC_SUPPL_RECV and TEE_IOC_SUPPL_SEND are used for invoking services in the userspace process by QTEE. The TEE backend driver uses the QTEE Transport Message to communicate with QTEE. Interactions through the object INVOKE interface are translated into QTEE messages. Likewise, object invocations from QTEE for userspace objects are converted into SEND/RECV ioctl calls to supplicants. * tag 'tee-qcomtee-for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jenswi/linux-tee: Documentation: tee: Add Qualcomm TEE driver tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl tee: qcom: add primordial object tee: add Qualcomm TEE driver tee: increase TEE_MAX_ARG_SIZE to 4096 tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF tee: add close_context to TEE driver operation tee: allow a driver to allocate a tee_device without a pool Link: https://lore.kernel.org/r/20250915174957.GA2040478@rayden Signed-off-by: Arnd Bergmann <arnd@arndb.de> |
||
|
Mykyta Yatsenko
|
5c8fd7e2b5 |
bpf: bpf task work plumbing
This patch adds necessary plumbing in verifier, syscall and maps to support handling new kfunc bpf_task_work_schedule and kernel structure bpf_task_work. The idea is similar to how we already handle bpf_wq and bpf_timer. verifier changes validate calls to bpf_task_work_schedule to make sure it is safe and expected invariants hold. btf part is required to detect bpf_task_work structure inside map value and store its offset, which will be used in the next patch to calculate key and value addresses. arraymap and hashtab changes are needed to handle freeing of the bpf_task_work: run code needed to deinitialize it, for example cancel task_work callback if possible. The use of bpf_task_work and proper implementation for kfuncs are introduced in the next patch. Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/r/20250923112404.668720-6-mykyta.yatsenko5@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Mark Brown
|
2bfb20b65d |
spi: rpc-if: Add resume support for RZ/G3E
Merge series from Biju Das <biju.das.jz@bp.renesas.com>: On RZ/G3E using PSCI, s2ram powers down the SoC. After resume, reinitialize the hardware for SPI operations. Also Replace the macro SIMPLE_DEV_PM_OPS->DEFINE_SIMPLE_DEV_PM_OPS macro and use pm_sleep_ptr(). This lets us drop the check for CONFIG_PM_SLEEP and __maybe_unused attribute from PM functions. |
||
|
Mark Brown
|
fd98145543 |
Support reading Subsystem ID from Device Tree
Merge series from Stefan Binding <sbinding@opensource.cirrus.com>: In PC systems using ACPI, the driver is able to read back an SSID from the _SUB property. This SSID uniquely identifies the system, which enables the driver to read the correct firmware and tuning for that system from linux-firmware. Currently there is no way of reading this property from device tree. Add an equivalent property in device tree to perform the same role. |
||
|
KP Singh
|
3492715683 |
bpf: Implement signature verification for BPF programs
This patch extends the BPF_PROG_LOAD command by adding three new fields
to `union bpf_attr` in the user-space API:
- signature: A pointer to the signature blob.
- signature_size: The size of the signature blob.
- keyring_id: The serial number of a loaded kernel keyring (e.g.,
the user or session keyring) containing the trusted public keys.
When a BPF program is loaded with a signature, the kernel:
1. Retrieves the trusted keyring using the provided `keyring_id`.
2. Verifies the supplied signature against the BPF program's
instruction buffer.
3. If the signature is valid and was generated by a key in the trusted
keyring, the program load proceeds.
4. If no signature is provided, the load proceeds as before, allowing
for backward compatibility. LSMs can chose to restrict unsigned
programs and implement a security policy.
5. If signature verification fails for any reason,
the program is not loaded.
Tested-by: syzbot@syzkaller.appspotmail.com
Signed-off-by: KP Singh <kpsingh@kernel.org>
Link: https://lore.kernel.org/r/20250921160120.9711-2-kpsingh@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
||
|
Matthieu Baerts (NGI0)
|
5c967ebb55 |
mptcp: use _BITUL() instead of (1 << x)
Simply to use the proper way to declare bits, and to align with all other flags declared in this file. No functional changes intended. Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250919-net-next-mptcp-server-side-flag-v1-5-a97a5d561a8b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Matthieu Baerts (NGI0)
|
3d7ae91107 |
mptcp: pm: netlink: announce server-side flag
Now that the 'flags' attribute is used, it seems interesting to add one flag for 'server-side', a boolean value. This is duplicating the info from the dedicated 'server-side' attribute, but it will be deprecated in the next commit, and removed in a few versions. Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250919-net-next-mptcp-server-side-flag-v1-2-a97a5d561a8b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Matthieu Baerts (NGI0)
|
c9809f03c1 |
mptcp: pm: netlink: only add server-side attr when true
This attribute is a boolean. No need to add it to set it to 'false'. Indeed, the default value when this attribute is not set is naturally 'false'. A few bytes can then be saved by not adding this attribute if the connection is not on the server side. This prepares the future deprecation of its attribute, in favour of a new flag. Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250919-net-next-mptcp-server-side-flag-v1-1-a97a5d561a8b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jacob Keller
|
cd875625b4 |
ptp: document behavior of PTP_STRICT_FLAGS
Commit
|
||
|
Haixu Cui
|
6a1f3390fa |
virtio-spi: Add virtio-spi.h
Add virtio-spi.h header for virtio SPI. Signed-off-by: Haixu Cui <quic_haixcui@quicinc.com> Link: https://patch.msgid.link/20250908092348.1283552-3-quic_haixcui@quicinc.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Haixu Cui
|
d9a2211dd3 |
virtio: Add ID for virtio SPI
Add VIRTIO_ID_SPI definition for virtio SPI. Signed-off-by: Haixu Cui <quic_haixcui@quicinc.com> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Link: https://patch.msgid.link/20250908092348.1283552-2-quic_haixcui@quicinc.com Signed-off-by: Mark Brown <broonie@kernel.org> |
||
|
Dave Airlie
|
342f141ba9 |
Merge tag 'amd-drm-next-6.18-2025-09-19' of https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.18-2025-09-19: amdgpu: - Fence drv clean up fix - DPC fixes - Misc display fixes - Support the MMIO remap page as a ttm pool - JPEG parser updates - UserQ updates - VCN ctx handling fixes - Documentation updates - Misc cleanups - SMU 13.0.x updates - SI DPM updates - GC 11.x cleaner shader updates - DMCUB updates - DML fixes - Improve fallback handling for pixel encoding - VCN reset improvements - DCE6 DC updates - DSC fixes - Use devm for i2c buses - GPUVM locking updates - GPUVM documentation improvements - Drop non-DC DCE11 code - S0ix fixes - Backlight fix - SR-IOV fixes amdkfd: - SVM updates Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://lore.kernel.org/r/20250919193354.2989255-1-alexander.deucher@amd.com |
||
|
Ashwini Sahu
|
d6d673dd1e |
uapi: vduse: fix typo in comment
Fix a spelling mistake in vduse.h: "regsion" → "region" in the documentation for struct vduse_iova_info. No functional change. Signed-off-by: Ashwini Sahu <ashwini@wisig.com> Message-Id: <20250908095645.610336-1-ashwini@wisig.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> |
||
|
Takashi Iwai
|
b8d8265a0d |
Merge tag 'asoc-v6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.18 A relatively quiet release for ASoC, we've had a lot of maintainance work going on and several new drivers but really the most remarkable thing is that we removed a driver, the WL1273 driver used in some old Nokia systems that have had the underlying system support removed from the kernel. - Morimoto-san continues his work on cleanups of the core APIs and enforcement of abstraction layers. - Lots of cleanups and conversions of DT bindings. - Substantial maintainance work on the Intel AVS drivers. - Support for Qualcomm Glymur and PM4125, Realtek RT1321, Shanghai FourSemi FS2104/5S, Texas Instruments PCM1754. - Remove support for TI WL1273. |
||
|
Alasdair McWilliam
|
b73b8146d7 |
rtnetlink: add needed_{head,tail}room attributes
Various network interface types make use of needed_{head,tail}room values
to efficiently reserve buffer space for additional encapsulation headers,
such as VXLAN, Geneve, IPSec, etc. However, it is not currently possible
to query these values in a generic way.
Introduce ability to query the needed_{head,tail}room values of a network
device via rtnetlink, such that applications that may wish to use these
values can do so.
For example, Cilium agent iterates over present devices based on user config
(direct routing, vxlan, geneve, wireguard etc.) and in future will configure
netkit in order to expose the needed_{head,tail}room into K8s pods. See
|
||
|
Alexey Klimov
|
b07d2514b9 |
ALSA: compress_offload: increase SNDRV_COMPRESS_VERSION minor version by 1
Since addition of raw opus codec support we need to update compress API minor version by one. Bump the SNDRV_COMPRESS_VERSION to 0.4.1. Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> |
||
|
Alexey Klimov
|
5d36370f34 |
ALSA: compress: add raw opus codec define and opus decoder structs
Adds a raw opus codec define and raw opus decoder structs. This is for raw OPUS packets not packed in any type of container (for instance OGG container). The decoder struct fields are taken from corresponding RFC document: RFC 7845 Section 5. Cc: Srinivas Kandagatla <srini@kernel.org> Cc: Vinod Koul <vkoul@kernel.org> Co-developed-by: Annemarie Porter <annemari@quicinc.com> Signed-off-by: Annemarie Porter <annemari@quicinc.com> Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> |
||
|
Christian Brauner
|
cc47f43427 |
nsfs: add inode number for anon namespace
Add an inode number anonymous namespaces. Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Christian Brauner <brauner@kernel.org> |