Pull vfs workqueue updates from Christian Brauner:
"This contains various workqueue changes affecting the filesystem
layer.
Currently if a user enqueue a work item using schedule_delayed_work()
the used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies
to schedule_work() that is using system_wq and queue_work(), that
makes use again of WORK_CPU_UNBOUND.
This replaces the use of system_wq and system_unbound_wq. system_wq is
a per-CPU workqueue which isn't very obvious from the name and
system_unbound_wq is to be used when locality is not required.
So this renames system_wq to system_percpu_wq, and system_unbound_wq
to system_dfl_wq.
This also adds a new WQ_PERCPU flag to allow the fs subsystem users to
explicitly request the use of per-CPU behavior. Both WQ_UNBOUND and
WQ_PERCPU flags coexist for one release cycle to allow callers to
transition their calls. WQ_UNBOUND will be removed in a next release
cycle"
* tag 'vfs-6.18-rc1.workqueue' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: WQ_PERCPU added to alloc_workqueue users
fs: replace use of system_wq with system_percpu_wq
fs: replace use of system_unbound_wq with system_dfl_wq
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
system_wq is a per-CPU worqueue, yet nothing in its name tells about that
CPU affinity constraint, which is very often not required by users.
Make it clear by adding a system_percpu_wq to all the fs subsystem.
The old wq will be kept for a few release cylces.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://lore.kernel.org/20250916082906.77439-3-marco.crivellari@suse.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add support for folios larger than one page size for stores.
Also change variable naming from "this_num" to "nr_bytes".
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Currently, all folios associated with fuse are one page size. As part of
the work to enable large folios, this commit adds support for copying
to/from folios larger than one page size.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Currently, when checking whether a request has timed out, we check
fpq processing, but fuse-over-io-uring has one fpq per core and 256
entries in the processing table. For systems where there are a
large number of cores, this may be too much overhead.
Instead of checking the fpq processing list, check ent_w_req_queue
and ent_in_userspace.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Bernd Schubert <bernd@bsbernd.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Refactor struct fuse_copy_state to use boolean bit-fields to improve
clarity/readability and be consistent with other fuse structs that use
bit-fields for boolean state (eg fuse_fs_context, fuse_args).
No functional changes.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Currently userspace is able to notify the kernel to invalidate the cache
for an inode. This means that, if all the inodes in a filesystem need to
be invalidated, then userspace needs to iterate through all of them and do
this kernel notification separately.
This patch adds the concept of 'epoch': each fuse connection will have the
current epoch initialized and every new dentry will have it's d_time set to
the current epoch value. A new operation will then allow userspace to
increment the epoch value. Every time a dentry is d_revalidate()'ed, it's
epoch is compared with the current connection epoch and invalidated if it's
value is different.
Signed-off-by: Luis Henriques <luis@igalia.com>
Tested-by: Laura Promberger <laura.promberger@cern.ch>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Pull fuse updates from Miklos Szeredi:
- Allow connection to server to time out (Joanne Koong)
- If server doesn't support creating a hard link, return EPERM rather
than ENOSYS (Matt Johnston)
- Allow file names longer than 1024 chars (Bernd Schubert)
- Fix a possible race if request on io_uring queue is interrupted
(Bernd Schubert)
- Misc fixes and cleanups
* tag 'fuse-update-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: remove unneeded atomic set in uring creation
fuse: fix uring race condition for null dereference of fc
fuse: Increase FUSE_NAME_MAX to PATH_MAX
fuse: Allocate only namelen buf memory in fuse_notify_
fuse: add default_request_timeout and max_request_timeout sysctls
fuse: add kernel-enforced timeout option for requests
fuse: optmize missing FUSE_LINK support
fuse: Return EPERM rather than ENOSYS from link()
fuse: removed unused function fuse_uring_create() from header
fuse: {io-uring} Fix a possible req cancellation race
Our file system has a translation capability for S3-to-posix.
The current value of 1kiB is enough to cover S3 keys, but
does not allow encoding of %xx escape characters.
The limit is increased to (PATH_MAX - 1), as we need
3 x 1024 and that is close to PATH_MAX (4kB) already.
-1 is used as the terminating null is not included in the
length calculation.
Testing large file names was hard with libfuse/example file systems,
so I created a new memfs that does not have a 255 file name length
limitation.
https://github.com/libfuse/libfuse/pull/1077
The connection is initialized with FUSE_NAME_LOW_MAX, which
is set to the previous value of FUSE_NAME_MAX of 1024. With
FUSE_MIN_READ_BUFFER of 8192 that is enough for two file names
+ fuse headers.
When FUSE_INIT reply sets max_pages to a value > 1 we know
that fuse daemon supports request buffers of at least 2 pages
(+ header) and can therefore hold 2 x PATH_MAX file names - operations
like rename or link that need two file names are no issue then.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
fuse_notify_inval_entry and fuse_notify_delete were using fixed allocations
of FUSE_NAME_MAX to hold the file name. Often that large buffers are not
needed as file names might be smaller, so this uses the actual file name
size to do the allocation.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Introduce two new sysctls, "default_request_timeout" and
"max_request_timeout". These control how long (in seconds) a server can
take to reply to a request. If the server does not reply by the timeout,
then the connection will be aborted. The upper bound on these sysctl
values is 65535.
"default_request_timeout" sets the default timeout if no timeout is
specified by the fuse server on mount. 0 (default) indicates no default
timeout should be enforced. If the server did specify a timeout, then
default_request_timeout will be ignored.
"max_request_timeout" sets the max amount of time the server may take to
reply to a request. 0 (default) indicates no maximum timeout. If
max_request_timeout is set and the fuse server attempts to set a
timeout greater than max_request_timeout, the system will use
max_request_timeout as the timeout. Similarly, if default_request_timeout
is greater than max_request_timeout, the system will use
max_request_timeout as the timeout. If the server does not request a
timeout and default_request_timeout is set to 0 but max_request_timeout
is set, then the timeout will be max_request_timeout.
Please note that these timeouts are not 100% precise. The request may
take roughly an extra FUSE_TIMEOUT_TIMER_FREQ seconds beyond the set max
timeout due to how it's internally implemented.
$ sysctl -a | grep fuse.default_request_timeout
fs.fuse.default_request_timeout = 0
$ echo 65536 | sudo tee /proc/sys/fs/fuse/default_request_timeout
tee: /proc/sys/fs/fuse/default_request_timeout: Invalid argument
$ echo 65535 | sudo tee /proc/sys/fs/fuse/default_request_timeout
65535
$ sysctl -a | grep fuse.default_request_timeout
fs.fuse.default_request_timeout = 65535
$ echo 0 | sudo tee /proc/sys/fs/fuse/default_request_timeout
0
$ sysctl -a | grep fuse.default_request_timeout
fs.fuse.default_request_timeout = 0
[Luis Henriques: Limit the timeout to the range [FUSE_TIMEOUT_TIMER_FREQ,
fuse_max_req_timeout]]
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Luis Henriques <luis@igalia.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
There are situations where fuse servers can become unresponsive or
stuck, for example if the server is deadlocked. Currently, there's no
good way to detect if a server is stuck and needs to be killed manually.
This commit adds an option for enforcing a timeout (in seconds) for
requests where if the timeout elapses without the server responding to
the request, the connection will be automatically aborted.
Please note that these timeouts are not 100% precise. For example, the
request may take roughly an extra FUSE_TIMEOUT_TIMER_FREQ seconds beyond
the requested timeout due to internal implementation, in order to
mitigate overhead.
[SzM: Bump the API version number]
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
task-A (application) might be in request_wait_answer and
try to remove the request when it has FR_PENDING set.
task-B (a fuse-server io-uring task) might handle this
request with FUSE_IO_URING_CMD_COMMIT_AND_FETCH, when
fetching the next request and accessed the req from
the pending list in fuse_uring_ent_assign_req().
That code path was not protected by fiq->lock and so
might race with task-A.
For scaling reasons we better don't use fiq->lock, but
add a handler to remove canceled requests from the queue.
This also removes usage of fiq->lock from
fuse_uring_add_req_to_ring_ent() altogether, as it was
there just to protect against this race and incomplete.
Also added is a comment why FR_PENDING is not cleared.
Fixes: c090c8abae ("fuse: Add io-uring sqe commit and fetch support")
Cc: <stable@vger.kernel.org> # v6.14
Reported-by: Joanne Koong <joannelkoong@gmail.com>
Closes: https://lore.kernel.org/all/CAJnrk1ZgHNb78dz-yfNTpxmW7wtT88A=m-zF0ZoLXKLUHRjNTw@mail.gmail.com/
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When mounting a user-space filesystem using io_uring, the initialization
of the rings is done separately in the server side. If for some reason
(e.g. a server bug) this step is not performed it will be impossible to
unmount the filesystem if there are already requests waiting.
This issue is easily reproduced with the libfuse passthrough_ll example,
if the queue depth is set to '0' and a request is queued before trying to
unmount the filesystem. When trying to force the unmount, fuse_abort_conn()
will try to wake up all tasks waiting in fc->blocked_waitq, but because the
rings were never initialized, fuse_uring_ready() will never return 'true'.
Fixes: 3393ff964e ("fuse: block request allocation until io-uring init is complete")
Signed-off-by: Luis Henriques <luis@igalia.com>
Link: https://lore.kernel.org/r/20250306111218.13734-1-luis@igalia.com
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The fix to atomically read the pipe head and tail state when not holding
the pipe mutex has caused a number of headaches due to the size change
of the involved types.
It turns out that we don't have _that_ many places that access these
fields directly and were affected, but we have more than we strictly
should have, because our low-level helper functions have been designed
to have intimate knowledge of how the pipes work.
And as a result, that random noise of direct 'pipe->head' and
'pipe->tail' accesses makes it harder to pinpoint any actual potential
problem spots remaining.
For example, we didn't have a "is the pipe full" helper function, but
instead had a "given these pipe buffer indexes and this pipe size, is
the pipe full". That's because some low-level pipe code does actually
want that much more complicated interface.
But most other places literally just want a "is the pipe full" helper,
and not having it meant that those places ended up being unnecessarily
much too aware of this all.
It would have been much better if only the very core pipe code that
cared had been the one aware of this all.
So let's fix it - better late than never. This just introduces the
trivial wrappers for "is this pipe full or empty" and to get how many
pipe buffers are used, so that instead of writing
if (pipe_full(pipe->head, pipe->tail, pipe->max_usage))
the places that literally just want to know if a pipe is full can just
say
if (pipe_is_full(pipe))
instead. The existing trivial cases were converted with a 'sed' script.
This cuts down on the places that access pipe->head and pipe->tail
directly outside of the pipe code (and core splice code) quite a lot.
The splice code in particular still revels in doing the direct low-level
accesses, and the fuse fuse_dev_splice_write() code also seems a bit
unnecessarily eager to go very low-level, but it's at least a bit better
than it used to be.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was another case that Rasmus pointed out where the direct access to
the pipe head and tail pointers broke on 32-bit configurations due to
the type changes.
As with the pipe FIONREAD case, fix it by using the appropriate helper
functions that deal with the right pipe index sizing.
Reported-by: Rasmus Villemoes <ravi@prevas.dk>
Link: https://lore.kernel.org/all/878qpi5wz4.fsf@prevas.dk/
Fixes: 3d252160b8 ("fs/pipe: Read pipe->{head,tail} atomically outside pipe->mutex")Cc: Oleg >
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Swapnil Sapkal <swapnil.sapkal@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Avoid races and block request allocation until io-uring
queues are ready.
This is a especially important for background requests,
as bg request completion might cause lock order inversion
of the typical queue->lock and then fc->bg_lock
fuse_request_end
spin_lock(&fc->bg_lock);
flush_bg_queue
fuse_send_one
fuse_uring_queue_fuse_req
spin_lock(&queue->lock);
Signed-off-by: Bernd Schubert <bernd@bsbernd.com>
Reviewed-by: Luis Henriques <luis@igalia.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
On teardown struct file_operations::uring_cmd requests
need to be completed by calling io_uring_cmd_done().
Not completing all ring entries would result in busy io-uring
tasks giving warning messages in intervals and unreleased
struct file.
Additionally the fuse connection and with that the ring can
only get released when all io-uring commands are completed.
Completion is done with ring entries that are
a) in waiting state for new fuse requests - io_uring_cmd_done
is needed
b) already in userspace - io_uring_cmd_done through teardown
is not needed, the request can just get released. If fuse server
is still active and commits such a ring entry, fuse_uring_cmd()
already checks if the connection is active and then complete the
io-uring itself with -ENOTCONN. I.e. special handling is not
needed.
This scheme is basically represented by the ring entry state
FRRS_WAIT and FRRS_USERSPACE.
Entries in state:
- FRRS_INIT: No action needed, do not contribute to
ring->queue_refs yet
- All other states: Are currently processed by other tasks,
async teardown is needed and it has to wait for the two
states above. It could be also solved without an async
teardown task, but would require additional if conditions
in hot code paths. Also in my personal opinion the code
looks cleaner with async teardown.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> # io_uring
Reviewed-by: Luis Henriques <luis@igalia.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
fuse-over-io-uring uses existing functions to find requests based
on their unique id - make these functions non-static.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Luis Henriques <luis@igalia.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Move 'struct fuse_copy_state' and fuse_copy_* functions
to fuse_dev_i.h to make it available for fuse-io-uring.
'copy_out_args()' is renamed to 'fuse_copy_out_args'.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Luis Henriques <luis@igalia.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This change sets up FUSE operations to always have headers in
args.in_args[0], even for opcodes without an actual header.
This step prepares for a clean separation of payload from headers,
initially it is used by fuse-over-io-uring.
For opcodes without a header, we use a zero-sized struct as a
placeholder. This approach:
- Keeps things consistent across all FUSE operations
- Will help with payload alignment later
- Avoids future issues when header sizes change
Op codes that already have an op code specific header do not
need modification.
Op codes that have neither payload nor op code headers
are not modified either (FUSE_READLINK and FUSE_DESTROY).
FUSE_BATCH_FORGET already has the header in the right place,
but is not using fuse_copy_args - as -over-uring is currently
not handling forgets it does not matter for now, but header
separation will later need special attention for that op code.
Correct the struct fuse_args->in_args array max size.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Luis Henriques <luis@igalia.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This function is needed by fuse_uring.c to clean ring queues,
so make it non static. Especially in non-static mode the function
name 'end_requests' should be prefixed with fuse_
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Luis Henriques <luis@igalia.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Pull fuse updates from Miklos Szeredi:
- Add page -> folio conversions (Joanne Koong, Josef Bacik)
- Allow max size of fuse requests to be configurable with a sysctl
(Joanne Koong)
- Allow FOPEN_DIRECT_IO to take advantage of async code path (yangyun)
- Fix large kernel reads (like a module load) in virtio_fs (Hou Tao)
- Fix attribute inconsistency in case readdirplus (and plain lookup in
corner cases) is racing with inode eviction (Zhang Tianci)
- Fix a WARN_ON triggered by virtio_fs (Asahi Lina)
* tag 'fuse-update-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (30 commits)
virtiofs: dax: remove ->writepages() callback
fuse: check attributes staleness on fuse_iget()
fuse: remove pages for requests and exclusively use folios
fuse: convert direct io to use folios
mm/writeback: add folio_mark_dirty_lock()
fuse: convert writebacks to use folios
fuse: convert retrieves to use folios
fuse: convert ioctls to use folios
fuse: convert writes (non-writeback) to use folios
fuse: convert reads to use folios
fuse: convert readdir to use folios
fuse: convert readlink to use folios
fuse: convert cuse to use folios
fuse: add support in virtio for requests using folios
fuse: support folios in struct fuse_args_pages and fuse_copy_pages()
fuse: convert fuse_notify_store to use folios
fuse: convert fuse_retrieve to use folios
fuse: use the folio based vmstat helpers
fuse: convert fuse_writepage_need_send to take a folio
fuse: convert fuse_do_readpage to use folios
...
All fuse requests use folios instead of pages for transferring data.
Remove pages from the requests and exclusively use folios.
No functional changes.
[SzM: rename back folio_descs -> descs, etc.]
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This adds support in struct fuse_args_pages and fuse_copy_pages() for
using folios instead of pages for transferring data. Both folios and
pages must be supported right now in struct fuse_args_pages and
fuse_copy_pages() until all request types have been converted to use
folios. Once all have been converted, then
struct fuse_args_pages and fuse_copy_pages() will only support folios.
Right now in fuse, all folios are one page (large folios are not yet
supported). As such, copying folio->page is sufficient for copying
the entire folio in fuse_copy_pages().
No functional changes.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
all failure exits prior to fdget() leave the scope, all matching fdput()
are immediately followed by leaving the scope.
[xfs_ioc_commit_range() chunk moved here as well]
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This function creates pages in an inode and copies data into them,
update the function to use a folio instead of a page, and use the
appropriate folio helpers.
[SzM: use filemap_grab_folio()]
[Hau Tao: The third argument of folio_zero_range() should be the length to
be zeroed, not the total length. Fix it by using folio_zero_segment()
instead in fuse_notify_store()]
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We're just looking for pages in a mapping, use a folio and the folio
lookup function directly instead of using the page helper.
Reviewed-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
no_llseek had been defined to NULL two years ago, in commit 868941b144
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull fuse updates from Miklos Szeredi:
- Add support for idmapped fuse mounts (Alexander Mikhalitsyn)
- Add optimization when checking for writeback (yangyun)
- Add tracepoints (Josef Bacik)
- Clean up writeback code (Joanne Koong)
- Clean up request queuing (me)
- Misc fixes
* tag 'fuse-update-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (32 commits)
fuse: use exclusive lock when FUSE_I_CACHE_IO_MODE is set
fuse: clear FR_PENDING if abort is detected when sending request
fs/fuse: convert to use invalid_mnt_idmap
fs/mnt_idmapping: introduce an invalid_mnt_idmap
fs/fuse: introduce and use fuse_simple_idmap_request() helper
fs/fuse: fix null-ptr-deref when checking SB_I_NOIDMAP flag
fuse: allow O_PATH fd for FUSE_DEV_IOC_BACKING_OPEN
virtio_fs: allow idmapped mounts
fuse: allow idmapped mounts
fuse: warn if fuse_access is called when idmapped mounts are allowed
fuse: handle idmappings properly in ->write_iter()
fuse: support idmapped ->rename op
fuse: support idmapped ->set_acl
fuse: drop idmap argument from __fuse_get_acl
fuse: support idmapped ->setattr op
fuse: support idmapped ->permission inode op
fuse: support idmapped getattr inode op
fuse: support idmap for mkdir/mknod/symlink/create/tmpfile
fuse: support idmapped FUSE_EXT_GROUPS
fuse: add an idmap argument to fuse_simple_request
...
Pull 'struct fd' updates from Al Viro:
"Just the 'struct fd' layout change, with conversion to accessor
helpers"
* tag 'pull-stable-struct_fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
add struct fd constructors, get rid of __to_fd()
struct fd: representation change
introduce fd_file(), convert all accessors to it.
If idmap == NULL *and* filesystem daemon declared idmapped mounts
support, then uid/gid values in a fuse header will be -1.
No functional changes intended.
Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Pull fuse fixes from Miklos Szeredi:
- Fix EIO if splice and page stealing are enabled on the fuse device
- Disable problematic combination of passthrough and writeback-cache
- Other bug fixes found by code review
* tag 'fuse-fixes-6.11-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: disable the combination of passthrough and writeback cache
fuse: update stats for pages in dropped aux writeback list
fuse: clear PG_uptodate when using a stolen page
fuse: fix memory leak in fuse_create_open
fuse: check aborted connection before adding requests to pending list for resending
fuse: use unsigned type for getxattr/listxattr size truncation
I've been timing various fuse operations and it's quite annoying to do
with kprobes. Add two tracepoints for sending and ending fuse requests
to make it easier to debug and time various operations.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
