Pull power management fixes from Rafael Wysocki:
"These fix an error path memory leak in the energy model management
code, fix a kerneldoc comment in it, and fix and revamp the energy
model YNL specification added recently along with the new energy model
management netlink interface (that received feedback after being
added):
- Fix a memory leak in em_create_pd() error path (Malaya Kumar Rout)
- Fix stale description of the cost field in struct em_perf_state to
reflect the current code (Yaxiong Tian)
- Fix and revamp the energy model YNL specification added recently
along with the energy model netlink interface (Changwoo Min)"
* tag 'pm-6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: EM: Add dump to get-perf-domains in the EM YNL spec
PM: EM: Change cpus' type from string to u64 array in the EM YNL spec
PM: EM: Rename em.yaml to dev-energymodel.yaml
PM: EM: Fix yamllint warnings in the EM YNL spec
PM: EM: Fix memory leak in em_create_pd() error path
PM: EM: Fix incorrect description of the cost field in struct em_perf_state
When creating containers the setup usually involves using CLONE_NEWNS
via clone3() or unshare(). This copies the caller's complete mount
namespace. The runtime will also assemble a new rootfs and then use
pivot_root() to switch the old mount tree with the new rootfs. Afterward
it will recursively umount the old mount tree thereby getting rid of all
mounts.
On a basic system here where the mount table isn't particularly large
this still copies about 30 mounts. Copying all of these mounts only to
get rid of them later is pretty wasteful.
This is exacerbated if intermediary mount namespaces are used that only
exist for a very short amount of time and are immediately destroyed
again causing a ton of mounts to be copied and destroyed needlessly.
With a large mount table and a system where thousands or ten-thousands
of containers are spawned in parallel this quickly becomes a bottleneck
increasing contention on the semaphore.
Extend open_tree() with a new OPEN_TREE_NAMESPACE flag. Similar to
OPEN_TREE_CLONE only the indicated mount tree is copied. Instead of
returning a file descriptor referring to that mount tree
OPEN_TREE_NAMESPACE will cause open_tree() to return a file descriptor
to a new mount namespace. In that new mount namespace the copied mount
tree has been mounted on top of a copy of the real rootfs.
The caller can setns() into that mount namespace and perform any
additionally required setup such as move_mount() detached mounts in
there.
This allows OPEN_TREE_NAMESPACE to function as a combined
unshare(CLONE_NEWNS) and pivot_root().
A caller may for example choose to create an extremely minimal rootfs:
fd_mntns = open_tree(-EBADF, "/var/lib/containers/wootwoot", OPEN_TREE_NAMESPACE);
This will create a mount namespace where "wootwoot" has become the
rootfs mounted on top of the real rootfs. The caller can now setns()
into this new mount namespace and assemble additional mounts.
This also works with user namespaces:
unshare(CLONE_NEWUSER);
fd_mntns = open_tree(-EBADF, "/var/lib/containers/wootwoot", OPEN_TREE_NAMESPACE);
which creates a new mount namespace owned by the earlier created user
namespace with "wootwoot" as the rootfs mounted on top of the real
rootfs.
Link: https://patch.msgid.link/20251229-work-empty-namespace-v1-1-bfb24c7b061f@kernel.org
Tested-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Aleksa Sarai <cyphar@cyphar.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Suggested-by: Christian Brauner <brauner@kernel.org>
Suggested-by: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The `COMEDI_RANGEINFO` ioctl does not work properly for subdevice
indices above 15. Currently, the only in-tree COMEDI drivers that
support more than 16 subdevices are the "8255" driver and the
"comedi_bond" driver. Making the ioctl work for subdevice indices up to
255 is achievable. It needs minor changes to the handling of the
`COMEDI_RANGEINFO` and `COMEDI_CHANINFO` ioctls that should be mostly
harmless to user-space, apart from making them less broken. Details
follow...
The `COMEDI_RANGEINFO` ioctl command gets the list of supported ranges
(usually with units of volts or milliamps) for a COMEDI subdevice or
channel. (Only some subdevices have per-channel range tables, indicated
by the `SDF_RANGETYPE` flag in the subdevice information.) It uses a
`range_type` value and a user-space pointer, both supplied by
user-space, but the `range_type` value should match what was obtained
using the `COMEDI_CHANINFO` ioctl (if the subdevice has per-channel
range tables) or `COMEDI_SUBDINFO` ioctl (if the subdevice uses a
single range table for all channels). Bits 15 to 0 of the `range_type`
value contain the length of the range table, which is the only part that
user-space should care about (so it can use a suitably sized buffer to
fetch the range table). Bits 23 to 16 store the channel index, which is
assumed to be no more than 255 if the subdevice has per-channel range
tables, and is set to 0 if the subdevice has a single range table. For
`range_type` values produced by the `COMEDI_SUBDINFO` ioctl, bits 31 to
24 contain the subdevice index, which is assumed to be no more than 255.
But for `range_type` values produced by the `COMEDI_CHANINFO` ioctl,
bits 27 to 24 contain the subdevice index, which is assumed to be no
more than 15, and bits 31 to 28 contain the COMEDI device's minor device
number for some unknown reason lost in the mists of time. The
`COMEDI_RANGEINFO` ioctl extract the length from bits 15 to 0 of the
user-supplied `range_type` value, extracts the channel index from bits
23 to 16 (only used if the subdevice has per-channel range tables),
extracts the subdevice index from bits 27 to 24, and ignores bits 31 to
28. So for subdevice indices 16 to 255, the `COMEDI_SUBDINFO` or
`COMEDI_CHANINFO` ioctl will report a `range_type` value that doesn't
work with the `COMEDI_RANGEINFO` ioctl. It will either get the range
table for the subdevice index modulo 16, or will fail with `-EINVAL`.
To fix this, always use bits 31 to 24 of the `range_type` value to hold
the subdevice index (assumed to be no more than 255). This affects the
`COMEDI_CHANINFO` and `COMEDI_RANGEINFO` ioctls. There should not be
anything in user-space that depends on the old, broken usage, although
it may now see different values in bits 31 to 28 of the `range_type`
values reported by the `COMEDI_CHANINFO` ioctl for subdevices that have
per-channel subdevices. User-space should not be trying to decode bits
31 to 16 of the `range_type` values anyway.
Fixes: ed9eccbe89 ("Staging: add comedi core")
Cc: stable@vger.kernel.org #5.17+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20251203162438.176841-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge fixes related to the energy model management for 6.19-rc6:
- Fix a memory leak in em_create_pd() error path (Malaya Kumar Rout)
- Fix stale description of the cost field in struct em_perf_state to
reflect the current code (Yaxiong Tian)
- Fix and revamp the energy model YNL specification added recently
along with the energy model netlink interface (Changwoo Min)
* pm-em:
PM: EM: Add dump to get-perf-domains in the EM YNL spec
PM: EM: Change cpus' type from string to u64 array in the EM YNL spec
PM: EM: Rename em.yaml to dev-energymodel.yaml
PM: EM: Fix yamllint warnings in the EM YNL spec
PM: EM: Fix memory leak in em_create_pd() error path
PM: EM: Fix incorrect description of the cost field in struct em_perf_state
Add a V4L2_CID_FLASH_DURATION control to set the duration of a
flash/strobe pulse. This controls the length of the flash/strobe pulse
output by device (typically a camera sensor) and connected to the flash
controller. This is different to the V4L2_CID_FLASH_TIMEOUT control,
which is implemented by the flash controller and defines a limit after
which the flash is "forcefully" turned off again.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Richard Leitner <richard.leitner@linux.dev>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
UAPI Changes:
- Remove unused KEEP_ACTIVE flag in the new multi queue uAPI (Niranjana)
- Expose new temperature attributes in HWMON (Karthik)
Driver Changes:
- Force i2c into polling mode when in survivability (Raag)
- Validate preferred system memory placement in xe_svm_range_validate (Brost)
- Adjust page count tracepoints in shrinker (Brost)
- Fix a couple drm_pagemap issues with multi-GPU (Brost)
- Define GuC firmware for NVL-S (Roper)
- Handle GT resume failure (Raag)
- Improve wedged mode handling (Lukasz)
- Add missing newlines to drm_warn messages (Osama)
- Fix WQ_MEM_RECLAIM passed as max_active to alloc_workqueue (Marco)
- Page-reclaim fixes and PRL stats addition (Brian)
- Fix struct guc_lfd_file_header kernel-doc (Jani)
- Allow compressible surfaces to be 1-way coherent (Xin)
- Fix DRM scheduler layering violations in Xe (Brost)
- Minor improvements to MERT code (Michal)
- Privatize struct xe_ggtt_node (Maarten)
- Convert wait for lmem init into an assert (Bala)
- Enable GSC loading and PXP for PTL (Daniele)
- Replace use of system_wq with tlb_inval->timeout_wq (Marco)
- VRAM addr range bit expansion (Fei)
- Cleanup unused header includes (Roper)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/aWkSxRQK7VhTlP32@intel.com
Document that the 'len' field in ethtool_gstrings and 'n_stats' field in
ethtool_stats optionally serve dual purposes: on entry they specify the
number of items requested, and on return they indicate the number
actually returned (which is not necessarily the same).
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Link: https://patch.msgid.link/20260115060544.481550-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With the introduction of the OMR feature, the PEBS memory auxiliary info
field for load and store latency events has been restructured for DMR.
The memory auxiliary info field's bit[8] indicates whether a L2 cache
miss occurred for a memory load or store instruction. If bit[8] is 0,
it signifies no L2 cache miss, and bits[7:0] specify the exact cache data
source (up to the L2 cache level). If bit[8] is 1, bits[7:0] represent
the OMR encoding, indicating the specific L3 cache or memory region
involved in the memory access. A significant enhancement is OMR encoding
provides up to 8 fine-grained memory regions besides the cache region.
A significant enhancement for OMR encoding is the ability to provide
up to 8 fine-grained memory regions in addition to the cache region,
offering more detailed insights into memory access regions.
For detailed information on the memory auxiliary info encoding, please
refer to section 16.2 "PEBS LOAD LATENCY AND STORE LATENCY FACILITY" in
the ISE documentation.
This patch ensures that the PEBS memory auxiliary info field is correctly
interpreted and utilized in DMR.
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260114011750.350569-3-dapeng1.mi@linux.intel.com
Cross-merge BPF and other fixes after downstream PR.
No conflicts.
Adjacent:
Auto-merging MAINTAINERS
Auto-merging Makefile
Auto-merging kernel/bpf/verifier.c
Auto-merging kernel/sched/ext.c
Auto-merging mm/memcontrol.c
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Merge series from Sascha Hauer <s.hauer@pengutronix.de>:
These are some patches for the tlv320adcx140 codec we are carrying
around for a while, time to upstream them.
Pull media fixes from Mauro Carvalho Chehab:
- ov02c10: some fixes related to preserving bayer pattern and
horizontal control
- ipu-bridge: Add quirks for some Dell XPS laptops with inverted
sensors
- mali-c55: Fix version identifier logic
- rzg2l-cru: csi-2: fix RZ/V2H input sizes on some variants
* tag 'media/v6.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: ov02c10: Remove unnecessary hflip and vflip pointers
media: ipu-bridge: Add DMI quirk for Dell XPS laptops with upside down sensors
media: ov02c10: Fix the horizontal flip control
media: ov02c10: Adjust x-win/y-win when changing flipping to preserve bayer-pattern
media: ov02c10: Fix bayer-pattern change after default vflip change
media: rzg2l-cru: csi-2: Support RZ/V2H input sizes
media: uapi: mali-c55-config: Remove version identifier
media: mali-c55: Remove duplicated version check
media: Documentation: mali-c55: Use v4l2-isp version identifier
Add an extended feature flag NL80211_EXT_FEATURE_EPPKE to allow a
driver to indicate support for the Enhanced Privacy Protection Key
Exchange (EPPKE) authentication protocol in non-AP STA mode, as
defined in "IEEE P802.11bi/D3.0, 12.16.9".
In case of SME in userspace, the Authentication frame body is prepared
in userspace while the driver finalizes the Authentication frame once
it receives the required fields and elements. The driver indicates
support for EPPKE using the extended feature flag so that userspace
can initiate EPPKE authentication.
When the feature flag is set, process EPPKE Authentication frames from
userspace in non-AP STA mode. If the flag is not set, reject EPPKE
Authentication frames.
Define a new authentication type NL80211_AUTHTYPE_EPPKE for EPPKE.
Signed-off-by: Ainy Kumari <ainy.kumari@oss.qualcomm.com>
Co-developed-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Signed-off-by: Kavita Kavita <kavita.kavita@oss.qualcomm.com>
Link: https://patch.msgid.link/20260114111900.2196941-2-kavita.kavita@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This commit adds shared shaper state across the cake instances beneath a
cake_mq qdisc. It works by periodically tracking the number of active
instances, and scaling the configured rate by the number of active
queues.
The scan is lockless and simply reads the qlen and the last_active state
variable of each of the instances configured beneath the parent cake_mq
instance. Locking is not required since the values are only updated by
the owning instance, and eventual consistency is sufficient for the
purpose of estimating the number of active queues.
The interval for scanning the number of active queues is set to 200 us.
We found this to be a good tradeoff between overhead and response time.
For a detailed analysis of this aspect see the Netdevconf talk:
https://netdevconf.info/0x19/docs/netdev-0x19-paper16-talk-paper.pdf
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jonas Köppeler <j.koeppeler@tu-berlin.de>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20260109-mq-cake-sub-qdisc-v8-5-8d613fece5d8@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce a new pixel format, V4L2_PIX_FMT_AV1, to the
Video4Linux2(V4L2) API. This format is intended for AV1
bitstreams in stateful decoding/encoding workflows.
The fourcc code 'AV10' is used to distinguish
this format from the existing V4L2_PIX_FMT_AV1_FRAME,
which is used for stateless AV1 decoder implementation.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Deepa Guthyappa Madivalara <deepa.madivalara@oss.qualcomm.com>
Tested-by: Val Packett <val@packett.cool>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Johannes Berg says:
====================
First set of changes for the current -next cycle, of note:
- ath12k gets an overhaul to support multi-wiphy device
wiphy and pave the way for future device support in
the same driver (rather than splitting to ath13k)
- mac80211 gets some better iteration macros
* tag 'wireless-next-2026-01-12' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (120 commits)
wifi: mac80211: remove width argument from ieee80211_parse_bitrates
wifi: mac80211_hwsim: remove NAN by default
wifi: mac80211: improve station iteration ergonomics
wifi: mac80211: improve interface iteration ergonomics
wifi: cfg80211: include S1G_NO_PRIMARY flag when sending channel
wifi: mac80211: unexport ieee80211_get_bssid()
wl1251: Replace strncpy with strscpy in wl1251_acx_fw_version
wifi: iwlegacy: 3945-rs: remove redundant pointer check in il3945_rs_tx_status() and il3945_rs_get_rate()
wifi: mac80211: don't send an unused argument to ieee80211_check_combinations
wifi: libertas: fix WARNING in usb_tx_block
wifi: mwifiex: Allocate dev name earlier for interface workqueue name
wifi: wlcore: sdio: Use pm_ptr instead of #ifdef CONFIG_PM
wifi: cfg80211: Fix use_for flag update on BSS refresh
wifi: brcmfmac: rename function that frees vif
wifi: brcmfmac: fix/add kernel-doc comments
wifi: mac80211: Update csa_finalize to use link_id
wifi: cfg80211: add cfg80211_stop_link() for per-link teardown
wifi: ath12k: Skip DP peer creation for scan vdev
wifi: ath12k: move firmware stats request outside of atomic context
wifi: ath12k: add the missing RCU lock in ath12k_dp_tx_free_txbuf()
...
====================
Link: https://patch.msgid.link/20260112185836.378736-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a best-effort stop command, UBLK_CMD_TRY_STOP_DEV, which only stops a
ublk device when it has no active openers.
Unlike UBLK_CMD_STOP_DEV, this command does not disrupt existing users.
New opens are blocked only after disk_openers has reached zero; if the
device is busy, the command returns -EBUSY and leaves it running.
The ub->block_open flag is used only to close a race with an in-progress
open and does not otherwise change open behavior.
Advertise support via the UBLK_F_SAFE_STOP_DEV feature flag.
Signed-off-by: Yoav Cohen <yoav@nvidia.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a function ublk_copy_user_integrity() to copy integrity information
between a request and a user iov_iter. This mirrors the existing
ublk_copy_user_pages() but operates on request integrity data instead of
regular data. Check UBLKSRV_IO_INTEGRITY_FLAG in iocb->ki_pos in
ublk_user_copy() to choose between copying data or integrity data.
[csander: change offset units from data bytes to integrity data bytes,
fix CONFIG_BLK_DEV_INTEGRITY=n build, rebase on user copy refactor]
Signed-off-by: Stanley Zhang <stazhang@purestorage.com>
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Indicate to the ublk server when an incoming request has integrity data
by setting UBLK_IO_F_INTEGRITY in the ublksrv_io_desc's op_flags field.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a feature flag UBLK_F_INTEGRITY for a ublk server to request
integrity/metadata support when creating a ublk device. The ublk server
can also check for the feature flag on the created device or the result
of UBLK_U_CMD_GET_FEATURES to tell if the ublk driver supports it.
UBLK_F_INTEGRITY requires UBLK_F_USER_COPY, as user copy is the only
data copy mode initially supported for integrity data.
Add UBLK_PARAM_TYPE_INTEGRITY and struct ublk_param_integrity to struct
ublk_params to specify the integrity params of a ublk device.
UBLK_PARAM_TYPE_INTEGRITY requires UBLK_F_INTEGRITY and a nonzero
metadata_size. The LBMD_PI_CAP_* and LBMD_PI_CSUM_* values from the
linux/fs.h UAPI header are used for the flags and csum_type fields.
If the UBLK_PARAM_TYPE_INTEGRITY flag is set, validate the integrity
parameters and apply them to the blk_integrity limits.
The struct ublk_param_integrity validations are based on the checks in
blk_validate_integrity_limits(). Any invalid parameters should be
rejected before being applied to struct blk_integrity.
[csander: drop redundant pi_tuple_size field, use block metadata UAPI
constants, add param validation]
Signed-off-by: Stanley Zhang <stazhang@purestorage.com>
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move the description of the LANDLOCK_ACCESS_FS_IOCTL_DEV access right
together with the file access rights.
This group of access rights applies to files (in this case device
files), and they can be added to file or directory inodes using
landlock_add_rule(2). The check for that works the same for all file
access rights, including LANDLOCK_ACCESS_FS_IOCTL_DEV.
Invoking ioctl(2) on directory FDs can not currently be restricted
with Landlock. Having it grouped separately in the documentation is a
remnant from earlier revisions of the LANDLOCK_ACCESS_FS_IOCTL_DEV
patch set.
Link: https://lore.kernel.org/all/20260108.Thaex5ruach2@digikod.net/
Signed-off-by: Günther Noack <gnoack3000@gmail.com>
Link: https://lore.kernel.org/r/20260111175203.6545-2-gnoack3000@gmail.com
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Currently pivot_root() doesn't work on the real rootfs because it
cannot be unmounted. Userspace has to do a recursive removal of the
initramfs contents manually before continuing the boot.
Really all we want from the real rootfs is to serve as the parent mount
for anything that is actually useful such as the tmpfs or ramfs for
initramfs unpacking or the rootfs itself. There's no need for the real
rootfs to actually be anything meaningful or useful. Add a immutable
rootfs called "nullfs" that can be selected via the "nullfs_rootfs"
kernel command line option.
The kernel will mount a tmpfs/ramfs on top of it, unpack the initramfs
and fire up userspace which mounts the rootfs and can then just do:
chdir(rootfs);
pivot_root(".", ".");
umount2(".", MNT_DETACH);
and be done with it. (Ofc, userspace can also choose to retain the
initramfs contents by using something like pivot_root(".", "/initramfs")
without unmounting it.)
Technically this also means that the rootfs mount in unprivileged
namespaces doesn't need to become MNT_LOCKED anymore as it's guaranteed
that the immutable rootfs remains permanently empty so there cannot be
anything revealed by unmounting the covering mount.
In the future this will also allow us to create completely empty mount
namespaces without risking to leak anything.
systemd already handles this all correctly as it tries to pivot_root()
first and falls back to MS_MOVE only when that fails.
This goes back to various discussion in previous years and a LPC 2024
presentation about this very topic.
Link: https://patch.msgid.link/20260112-work-immutable-rootfs-v2-3-88dd1c34a204@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
In source code comments, use terminology that comes from the JEDEC UFS
standard. This makes it easier to compare the UFS driver code with the
JEDEC UFS standard. Add static_assert() statements that verify the size
of data structures defined in the UFS standard.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260106190017.2527978-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In a vain attempt to consolidate the email zoo switch everything to the
kernel.org account.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
"AMDGPU_GEM_DOMAIN_MMIO_REMAP" - Never activated as UAPI and it turned
out that this was to inflexible.
Allocate the MMIO_REMAP buffer object as a regular GEM BO and explicitly
move it into the fixed AMDGPU_PL_MMIO_REMAP placement at the TTM level.
This avoids relying on GEM domain bits for MMIO_REMAP, keeps the
placement purely internal, and makes the lifetime and pinning of the
global MMIO_REMAP BO explicit. The BO is pinned in TTM so it cannot be
migrated or evicted.
The corresponding free path relies on normal DRM teardown ordering,
where no further user ioctls can access the global BO once TTM teardown
begins.
v2 (Srini):
- Updated patch title.
- Drop use of AMDGPU_GEM_DOMAIN_MMIO_REMAP in amdgpu_ttm.c. The
MMIO_REMAP domain bit is removed from UAPI, so keep the MMIO_REMAP BO
allocation domain-less (bp.domain = 0) and rely on the TTM placement
(AMDGPU_PL_MMIO_REMAP) for backing/pinning.
- Keep fdinfo/mem-stats visibility for MMIO_REMAP by classifying BOs
based on bo->tbo.resource->mem_type == AMDGPU_PL_MMIO_REMAP, since the
domain bit is removed.
v3: Squash patches #1 & #3
Fixes: 0561324837 ("drm/amdgpu/uapi: Introduce AMDGPU_GEM_DOMAIN_MMIO_REMAP")
Fixes: 2a7a794eb8 ("drm/amdgpu/ttm: Allocate/Free 4K MMIO_REMAP Singleton")
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Leo Liu <leo.liu@amd.com>
Cc: Ruijing Dong <ruijing.dong@amd.com>
Cc: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix all kernel-doc warnings in rocket_accel.h:
Warning: include/uapi/drm/rocket_accel.h:35 Incorrect use of kernel-doc
format: * Output: DMA address for the BO in the NPU address space.
This address
and 22 warnings like these:
Warning: include/uapi/drm/rocket_accel.h:43 struct member 'size'
not described in 'drm_rocket_create_bo'
Warning: include/uapi/drm/rocket_accel.h:60 struct member 'handle'
not described in 'drm_rocket_prep_bo'
Warning: include/uapi/drm/rocket_accel.h:73 struct member 'handle'
not described in 'drm_rocket_fini_bo'
Warning: include/uapi/drm/rocket_accel.h:86 struct member 'regcmd'
not described in 'drm_rocket_task'
Warning: include/uapi/drm/rocket_accel.h:116 struct member 'tasks'
not described in 'drm_rocket_job'
Warning: include/uapi/drm/rocket_accel.h:135 struct member 'jobs'
not described in 'drm_rocket_submit'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Link: https://patch.msgid.link/20251023062440.4093661-1-rdunlap@infradead.org
PCIe permits a device to ignore ATS invalidation TLPs while processing a
reset. This creates a problem visible to the OS where an ATS invalidation
command will time out. E.g. an SVA domain will have no coordination with a
reset event and can racily issue ATS invalidations to a resetting device.
The OS should do something to mitigate this as we do not want production
systems to be reporting critical ATS failures, especially in a hypervisor
environment. Broadly, OS could arrange to ignore the timeouts, block page
table mutations to prevent invalidations, or disable and block ATS.
The PCIe r6.0, sec 10.3.1 IMPLEMENTATION NOTE recommends SW to disable and
block ATS before initiating a Function Level Reset. It also mentions that
other reset methods could have the same vulnerability as well.
Provide a callback from the PCI subsystem that will enclose the reset and
have the iommu core temporarily change all the attached RID/PASID domains
group->blocking_domain so that the IOMMU hardware would fence any incoming
ATS queries. And IOMMU drivers should also synchronously stop issuing new
ATS invalidations and wait for all ATS invalidations to complete. This can
avoid any ATS invaliation timeouts.
However, if there is a domain attachment/replacement happening during an
ongoing reset, ATS routines may be re-activated between the two function
calls. So, introduce a new resetting_domain in the iommu_group structure
to reject any concurrent attach_dev/set_dev_pasid call during a reset for
a concern of compatibility failure. Since this changes the behavior of an
attach operation, update the uAPI accordingly.
Note that there are two corner cases:
1. Devices in the same iommu_group
Since an attachment is always per iommu_group, this means that any
sibling devices in the iommu_group cannot change domain, to prevent
race conditions.
2. An SR-IOV PF that is being reset while its VF is not
In such case, the VF itself is already broken. So, there is no point
in preventing PF from going through the iommu reset.
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Dheeraj Kumar Srivastava <dheerajkumar.srivastava@amd.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Add dump to get-perf-domains, so that a user can fetch either information
about a specific performance domain with do or information about all
performance domains with dump. Share the reply format of do and dump using
perf-domain-attrs, so remove perf-domains. The YNL spec, autogenerated
files, and the do implementation are updated, and the dump implementation
is added.
Suggested-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Link: https://patch.msgid.link/20260108053212.642478-5-changwoo@igalia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The EM YNL specification used many acronyms, including ‘em’, ‘pd’,
‘ps’, etc. While the acronyms are short and convenient, they could be
confusing. So, let’s spell them out to be more specific. The following
changes were made in the spec. Note that the protocol name cannot exceed
GENL_NAMSIZ (16).
em -> dev-energymodel
pds -> perf-domains
pd -> perf-domain
pd-id -> perf-domain-id
pd-table -> perf-table
ps -> perf-state
get-pds -> get-perf-domains
get-pd-table -> get-perf-table
pd-created -> perf-domain-created
pd-updated -> perf-domain-updated
pd-deleted -> perf-domain-deleted
In addition. doc strings were added to the spec. based on the comments in
energy_model.h. Two flag attributes (perf-state-flags and
perf-domain-flags) were added for easily interpreting the bit flags.
Finally, the autogenerated files and em_netlink.c were updated accordingly
to reflect the name changes.
Suggested-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Changwoo Min <changwoo@igalia.com>
Link: https://patch.msgid.link/20260108053212.642478-3-changwoo@igalia.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull vfs fixes from Christian Brauner:
- Remove incorrect __user annotation from struct xattr_args::value
- Documentation fix: Add missing kernel-doc description for the @isnew
parameter in ilookup5_nowait() to silence Sphinx warnings
- Documentation fix: Fix kernel-doc comment for __start_dirop() - the
function name in the comment was wrong and the @state parameter was
undocumented
- Replace dynamic folio_batch allocation with stack allocation in
iomap_zero_range(). The dynamic allocation was problematic for
ext4-on-iomap work (didn't handle allocation failure properly) and
triggered lockdep complaints. Uses a flag instead to control batch
usage
- Re-add #ifdef guards around PIDFD_GET_<ns-type>_NAMESPACE ioctls.
When a namespace type is disabled, ns->ops is NULL, causes crashes
during inode eviction when closing the fd. The ifdefs were removed in
a recent simplification but are still needed
- Fixe a race where a folio could be unlocked before the trailing zeros
(for EOF within the page) were written
- Split out a dedicated lease_dispose_list() helper since lease code
paths always know they're disposing of leases. Removes unnecessary
runtime flag checks and prepares for upcoming lease_manager
enhancements
- Fix userland delegation requests succeeding despite conflicting
opens. Previously, FL_LAYOUT and FL_DELEG leases bypassed conflict
checks (a hack for nfsd). Adds new ->lm_open_conflict() lease_manager
operation so userland delegations get proper conflict checking while
nfsd can continue its own conflict handling
- Fix LOOKUP_CACHED path lookups incorrectly falling through to the
slow path. After legitimize_links() calls were conditionally elided,
the routine would always fail with LOOKUP_CACHED regardless of
whether there were any links. Now the flag is checked at the two
callsites before calling legitimize_links()
- Fix bug in media fd allocation in media_request_alloc()
- Fix mismatched API calls in ecryptfs_mknod(): was calling
end_removing() instead of end_creating() after
ecryptfs_start_creating_dentry()
- Fix dentry reference count leak in ecryptfs_mkdir(): a dget() of the
lower parent dir was added but never dput()'d, causing BUG during
lower filesystem unmount due to the still-in-use dentry
* tag 'vfs-6.19-rc5.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
pidfs: protect PIDFD_GET_* ioctls() via ifdef
ecryptfs: Release lower parent dentry after creating dir
ecryptfs: Fix improper mknod pairing of start_creating()/end_removing()
get rid of bogus __user in struct xattr_args::value
VFS: fix __start_dirop() kernel-doc warnings
fs: Describe @isnew parameter in ilookup5_nowait()
fs: make sure to fail try_to_unlazy() and try_to_unlazy() for LOOKUP_CACHED
netfs: Fix early read unlock of page with EOF in middle
filelock: allow lease_managers to dictate what qualifies as a conflict
filelock: add lease_dispose_list() helper
iomap: replace folio_batch allocation with stack allocation
media: mc: fix potential use-after-free in media_request_alloc()
Pull nfsd fixes from Chuck Lever:
"A set of NFSD fixes for stable that arrived after the merge window:
- Remove an invalid NFS status code
- Fix an fstests failure when using pNFS
- Fix a UAF in v4_end_grace()
- Fix the administrative interface used to revoke NFSv4 state
- Fix a memory leak reported by syzbot"
* tag 'nfsd-6.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: net ref data still needs to be freed even if net hasn't startup
nfsd: check that server is running in unlock_filesystem
nfsd: use correct loop termination in nfsd4_revoke_states()
nfsd: provide locking for v4_end_grace
NFSD: Fix permission check for read access to executable-only files
NFSD: Remove NFSERR_EAGAIN
The Mali C55 driver uses the v4l2-isp framework, which defines its own
versioning number which does not need to be defined again in each
platform-specific header.
Remove the definition of mali_c55_param_buffer_version enumeration from
the Mali C55 uAPI header.
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add support for separate ring-buffer for metadata packets when using
compute queues. Userspace application allocate the metadata ring-buffer
and the queue ring-buffer with a single allocation. The metadata
ring-buffer starts after the queue ring-buffer.
Signed-off-by: David Yat Sin <David.YatSin@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
