Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-02-11 (idpf, ixgbe, igc)
For idpf:
Sridhar fixes a couple issues in handling of RSC packets.
Josh adds a call to set_real_num_queues() to keep queue count in sync.
For ixgbe:
Piotr removes missed IS_ERR() removal when ERR_PTR usage was removed.
For igc:
Zdenek Bouska fixes reporting of Rx timestamp with AF_XDP.
Siang sets buffer type on empty frame to ensure proper handling.
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igc: Set buffer type for empty frames in igc_init_empty_frame
igc: Fix HW RX timestamp when passed by ZC XDP
ixgbe: Fix possible skb NULL pointer dereference
idpf: call set_real_num_queues in idpf_open
idpf: record rx queue in skb for RSC packets
idpf: fix handling rsc packet with a single segment
====================
Link: https://patch.msgid.link/20250211214343.4092496-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit 5d4cc87414 ("net: reorganize "struct sock" fields"),
the sk_tsflags field shares the same cacheline with sk_forward_alloc.
The UDP protocol does not acquire the sock lock in the RX path;
forward allocations are protected via the receive queue spinlock;
additionally udp_recvmsg() calls sock_recv_cmsgs() unconditionally
touching sk_tsflags on each packet reception.
Due to the above, under high packet rate traffic, when the BH and the
user-space process run on different CPUs, UDP packet reception
experiences a cache miss while accessing sk_tsflags.
The receive path doesn't strictly need to access the problematic field;
change sock_set_timestamping() to maintain the relevant information
in a newly allocated sk_flags bit, so that sock_recv_cmsgs() can
take decisions accessing the latter field only.
With this patch applied, on an AMD epic server with i40e NICs, I
measured a 10% performance improvement for small packets UDP flood
performance tests - possibly a larger delta could be observed with more
recent H/W.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/dbd18c8a1171549f8249ac5a8b30b1b5ec88a425.1739294057.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Donald Hunter says:
====================
netlink: specs: add a spec for nl80211 wiphy
Add a rudimentary YNL spec for nl80211 that includes get-wiphy and
get-interface, along with some required enhancements to YNL and the
netlink schemas.
Patch 1 is a minor cleanup to prepare for patch 2
Patches 2-4 are new features for YNL
Patches 5-7 are updates to ynl_gen_c
Patches 8-9 are schema updates for feature parity
Patch 10 is the new nl80211 spec
====================
Link: https://patch.msgid.link/20250211120127.84858-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: dsa: add support for phylink managed EEE
This series adds support for phylink managed EEE to DSA, and converts
mt753x to make use of this feature.
Patch 1 implements a helper to indicate whether the MAC LPI operations
are populated (suggested by Vladimir)
Patch 2 makes the necessary changes to the core code - we retain calling
set_mac_eee(), but this method now becomes a way to merely validate the
arguments when using phylink managed EEE rather than performing any
configuration.
Patch 3 converts the mt7530 driver to use phylink managed EEE.
====================
Link: https://patch.msgid.link/Z6nWujbjxlkzK_3P@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to allow DSA drivers to use phylink managed EEE, we need to
change the behaviour of the DSA's .set_eee() ethtool method.
Implementation of the DSA .set_mac_eee() method becomes optional with
phylink managed EEE as it is only used to validate the EEE parameters
supplied from userspace. The rest of the EEE state management should
be left to phylink.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1thR9l-003vXC-9F@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It is possible for some waves in a workgroup to finish their save
sequence before the group leader has had time to capture the workgroup
barrier state. When this happens, having those waves exit do impact the
barrier state. As a consequence, the state captured by the group leader
is invalid, and is eventually incorrectly restored.
This patch proposes to have all waves in a workgroup wait for each other
at the end of their save sequence (just before calling s_endpgm_saved).
Signed-off-by: Lancelot SIX <lancelot.six@amd.com>
Reviewed-by: Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.12.x
In function psp_init_cap_microcode(), it should bail out when failed to
load firmware, otherwise it may cause invalid memory access.
Fixes: 07dbfc6b10 ("drm/amd: Use `amdgpu_ucode_*` helpers for PSP")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jiang Liu <gerry@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The destructor of a gtt bo is declared as
void amdgpu_amdkfd_free_gtt_mem(struct amdgpu_device *adev, void **mem_obj);
Which takes void** as the second parameter.
GCC allows passing void* to the function because void* can be implicitly
casted to any other types, so it can pass compiling.
However, passing this void* parameter into the function's
execution process(which expects void** and dereferencing void**)
will result in errors.
Signed-off-by: Zhu Lingshan <lingshan.zhu@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Fixes: fb91065851 ("drm/amdkfd: Refactor queue wptr_bo GART mapping")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Jakub Kicinski says:
====================
eth: fbnic: report software queue stats
Fill in typical software queue stats.
# ./pyynl/cli.py --spec netlink/specs/netdev.yaml --dump qstats-get
[{'ifindex': 2,
'rx-alloc-fail': 0,
'rx-bytes': 398064076,
'rx-csum-complete': 271,
'rx-csum-none': 0,
'rx-packets': 276044,
'tx-bytes': 7223770,
'tx-needs-csum': 28148,
'tx-packets': 28449,
'tx-stop': 0,
'tx-wake': 0}]
Note that we don't collect csum-unnecessary, just the uncommon
cases (and unnecessary is all the rest of the packets). There
is no programatic use for these stats AFAIK, just manual debug.
====================
Link: https://patch.msgid.link/20250211181356.580800-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The queue stats struct is used for Rx and Tx queues. Wrap
the Tx stats in a struct and a union, so that we can reuse
the same space for Rx stats on Rx queues.
This also makes it easy to add an assert to the stat handling
code to catch new stats not being aggregated on shutdown.
Acked-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20250211181356.580800-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
_orig_restart_count is unused now, according to the logic, trans_was_restarted
should be using _orig_restart_count.
Signed-off-by: Alan Huang <mmpgouride@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Incorrectly handled transaction restarts can be a source of heisenbugs;
add a mode where we randomly inject them to shake them out.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This is the idiomatic way that opcodes should setup their async data,
so that it's always valid inside ->issue() without issue needing to
do that.
Fixes: f31ecf671d ("io_uring: add IORING_OP_WAITID support")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This code can be called deep in the IRQ handling, for
example, and then cannot normally use kmalloc(). Have
its own pre-allocated memory and use from there instead
so this doesn't occur. Only in the (very rare) case of
memcpy_toio() we'd still need to allocate memory.
Link: https://patch.msgid.link/20250110125550.32479-6-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
It was reported that qemu may not enable the XSTATE CPU extension, which
is a requirement after commit 3f17fed214 ("um: switch to regset API
and depend on XSTATE"). Add a fallback to use FXSAVE (FP registers on
x86_64 and XFP on i386) which is just a shorter version of the same
data. The only difference is that the XSTATE magic should not be set in
the signal frame.
Note that this still drops support for the older i386 FP register layout
as supporting this would require more backward compatibility to build a
correct signal frame.
Fixes: 3f17fed214 ("um: switch to regset API and depend on XSTATE")
Reported-by: SeongJae Park <sj@kernel.org>
Closes: https://lore.kernel.org/r/20241203070218.240797-1-sj@kernel.org
Tested-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://patch.msgid.link/20241204074827.1582917-1-benjamin@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Any uring_cmd always has async data allocated now, there's no reason to
check and clear a cached copy of the SQE.
Fixes: d10f19dff5 ("io_uring/uring_cmd: switch to always allocating async data")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Starting with Rust 1.86.0 (to be released 2025-04-03), Clippy will have
a new lint, `doc_overindented_list_items` [1], which catches cases of
overindented list items.
The lint has been added by Yutaro Ohno, based on feedback from the kernel
[2] on a patch that fixed a similar case -- commit 0c5928dead ("rust:
block: fix formatting in GenDisk doc").
Clippy reports a few cases in the kernel, apart from the one already
fixed in the commit above. One is this one:
error: doc list item overindented
--> rust/kernel/rbtree.rs:1152:5
|
1152 | /// null, it is a pointer to the root of the [`RBTree`].
| ^^^^ help: try using ` ` (2 spaces)
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#doc_overindented_list_items
= note: `-D clippy::doc-overindented-list-items` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::doc_overindented_list_items)]`
Thus clean it up.
Cc: Yutaro Ohno <yutaro.ono.418@gmail.com>
Cc: stable@vger.kernel.org # Needed in 6.12.y and 6.13.y only (Rust is pinned in older LTSs).
Fixes: a335e95914 ("rust: rbtree: add `RBTree::entry`")
Link: https://github.com/rust-lang/rust-clippy/pull/13711 [1]
Link: https://github.com/rust-lang/rust-clippy/issues/13601 [2]
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Yutaro Ohno <yutaro.ono.418@gmail.com>
Link: https://lore.kernel.org/r/20250206232022.599998-1-ojeda@kernel.org
[ There are a few other cases, so updated message. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Starting with Rust 1.85.0 (currently in beta, to be released 2025-02-20),
under some kernel configurations with `CONFIG_RUST_DEBUG_ASSERTIONS=y`,
one may trigger a new `objtool` warning:
rust/kernel.o: warning: objtool: _R...securityNtB2_11SecurityCtx8as_bytes()
falls through to next function _R...core3ops4drop4Drop4drop()
due to a call to the `noreturn` symbol:
core::panicking::assert_failed::<usize, usize>
Thus add it to the list so that `objtool` knows it is actually `noreturn`.
Do so matching with `strstr` since it is a generic.
See commit 56d680dd23 ("objtool/rust: list `noreturn` Rust functions")
for more details.
Cc: stable@vger.kernel.org # Needed in 6.12.y and 6.13.y only (Rust is pinned in older LTSs).
Fixes: 56d680dd23 ("objtool/rust: list `noreturn` Rust functions")
Reviewed-by: Gary Guo <gary@garyguo.net>
Link: https://lore.kernel.org/r/20250112143951.751139-1-ojeda@kernel.org
[ Updated Cc: stable@ to include 6.13.y. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Pull MFD fix from Lee Jones:
- Fix syscon users not specifying the "syscon" compatible
* tag 'mfd-fixes-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
mfd: syscon: Restore device_node_to_regmap() for non-syscon nodes
5eff57fa9f ("io_uring/uring_cmd: defer SQE copying until it's needed")
moved the unconditional memcpy() of the uring_cmd SQE to async_data
to 2 cases when the request goes async:
- If REQ_F_FORCE_ASYNC is set to force the initial issue to go async
- If ->uring_cmd() returns -EAGAIN in the initial non-blocking issue
Unlike the REQ_F_FORCE_ASYNC case, in the EAGAIN case, io_uring_cmd()
copies the SQE to async_data but neglects to update the io_uring_cmd's
sqe field to point to async_data. As a result, sqe still points to the
slot in the userspace-mapped SQ. At the end of io_submit_sqes(), the
kernel advances the SQ head index, allowing userspace to reuse the slot
for a new SQE. If userspace reuses the slot before the io_uring worker
reissues the original SQE, the io_uring_cmd's SQE will be corrupted.
Introduce a helper io_uring_cmd_cache_sqes() to copy the original SQE to
the io_uring_cmd's async_data and point sqe there. Use it for both the
REQ_F_FORCE_ASYNC and EAGAIN cases. This ensures the uring_cmd doesn't
read from the SQ slot after it has been returned to userspace.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Fixes: 5eff57fa9f ("io_uring/uring_cmd: defer SQE copying until it's needed")
Link: https://lore.kernel.org/r/20250212204546.3751645-3-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
eaf72f7b41 ("io_uring/uring_cmd: cleanup struct io_uring_cmd_data
layout") removed most of the places assuming struct io_uring_cmd_data
has sqes as its first field. However, the EAGAIN case in io_uring_cmd()
still compares ioucmd->sqe to the struct io_uring_cmd_data pointer using
a void * cast. Since fa3595523d ("io_uring: get rid of alloc cache
init_once handling"), sqes is no longer io_uring_cmd_data's first field.
As a result, the pointers will always compare unequal and memcpy() may
be called with the same source and destination.
Replace the incorrect void * cast with the address of the sqes field.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Fixes: eaf72f7b41 ("io_uring/uring_cmd: cleanup struct io_uring_cmd_data layout")
Link: https://lore.kernel.org/r/20250212204546.3751645-2-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
