When a device is opened via input_open_device(), the driver's open()
callback is invoked. Some drivers, like cm109, submit URBs or perform
other hardware initialization in their open() callbacks.
However, the input core does not prevent dev->event() from being called
concurrently during the driver's open() execution. For instance, if a
console beep occurs, the kbd handler might inject an EV_SND event. This
can lead to double list_add BUGs if the driver submits the same URB in
both open() and event() paths without adequate synchronization.
To fix this, introduce a ready flag in the input_dev structure.
For complex devices (where dev->open is defined), this flag is set to true
only after the driver's open() method successfully completes. The core now
checks ready in input_event_dispose() and input_dev_toggle()
to prevent events from reaching the hardware before it is fully prepared.
For simple devices (no open callback), events are delivered immediately.
We also replay the logical state in input_open_device() by calling
input_dev_toggle() right after marking the device ready, ensuring no
events are permanently lost.
In the inhibit path, we ensure that physical feedback (LEDs/sounds) is
turned off before the device is closed, and we synchronize the inhibited
state transition under the event lock to prevent races with incoming events.
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/20260803005210.1251102-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Instead of hardcoding PA-RISC specific keycode tables into atkbd via
compile-time inclusion, have the gscps2 PS/2 port driver attach a
linux,keymap software node device property to the serio device when
a keyboard port is registered. This allows atkbd to dynamically fetch
and apply the custom keymap when probing the port using generic
firmware property helpers, removing architecture-specific hacks from
generic keyboard driver code.
Co-locate the keymap definitions with the serio port driver by moving
hpps2atkbd.h from drivers/input/keyboard/ to drivers/input/serio/.
To handle the five conflicting keys on RDI PrecisionBook laptops without
runtime model string checks or duplicate keymap tables in memory, add
CONFIG_SERIO_GSCPS2_RDI_KEYCODES to drivers/input/serio/Kconfig and
resolve the conflicting keycodes at compile time via preprocessor
macros.
Link: https://patch.msgid.link/am_9BvmZu9g4RlUM@google.com
Acked-by: Helge Deller <deller@gmx.de>
Tested-by: Helge Deller <deller@gmx.de>
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
focaltech_finger_state stores finger coordinates x and y as unsigned
int. When processing relative packets, negative deltas can cause
unsigned integer underflow if the finger moves past the left or bottom
boundary of the touchpad, wrapping the coordinates to values near
UINT_MAX.
When clamping the coordinates in focaltech_report_state(), these
underflowed values are clamped against priv->x_max / priv->y_max instead
of 0, causing the cursor to jump erratically to the opposite edge of the
touchpad.
Change the coordinate variables and limits to signed int so that
negative values resulting from relative movements clamp correctly to 0,
and write the clamped values back to state in focaltech_report_state()
to prevent coordinate wind-up accumulation at the touchpad boundaries.
Fixes: 05be1d079e ("Input: psmouse - support for the FocalTech PS/2 protocol extensions")
Reported-by: sashiko-bot@kernel.org
Link: https://patch.msgid.link/am_tH_F938rK6ask@google.com
Assisted-by: Antigravity:gemini-3.6-flash
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In the past, psmouse_disconnect() used cancel_work_sync(). Because
cancel_work_sync() must be called with the psmouse_mutex dropped, and we
needed to prevent psmouse_receive_byte() from re-queueing the work
behind our back, the code transitioned the device to PSMOUSE_CMD_MODE
while holding the mutex, then dropped the mutex and cancelled the work.
When cancel_work_sync() was replaced with disable_work_sync() in this
path, the mutex juggling remained. However, disable_work_sync()
inherently prevents the work from being executed or re-queued, making
the mutex juggling unnecessary.
Clean this up by moving disable_work_sync() to the very top of
psmouse_disconnect(), before we acquire psmouse_mutex.
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/20260727050803.1269941-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When a PS/2 mouse is disconnected or unbound, psmouse_disconnect() calls
the protocol disconnect handler (psmouse->disconnect()). During this time,
stray bytes arriving from the physical controller can still be passed to
psmouse_handle_byte(), which will invoke psmouse->protocol_handler().
This creates an asynchronous race condition with vendor disconnect handlers
(such as synaptics_disconnect()), which free vendor-specific private
structures (psmouse->private). If a byte arrives while the structures
are being freed, it leads to a use-after-free or NULL pointer
dereference in the protocol handler.
Fix this by explicitly setting psmouse->protocol_handler to NULL
safely wrapped in scoped_guard(serio_pause_rx, serio) immediately before
calling the vendor disconnect handler. We also add an unlikely check
in psmouse_handle_byte() to safely drop incoming bytes if the protocol
handler is NULL.
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/20260727050803.1269941-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver requests the interrupt during probe, which by default enables
it. If the bootloader left the keypad interrupts enabled, or if a
spurious interrupt fires early before the driver is fully initialized
and clocks are enabled, the interrupt handler will attempt to read
registers and may cause a synchronous external abort.
Fix this by requesting the interrupt with IRQF_NO_AUTOEN, keeping it
disabled during probe. Enable the interrupt in samsung_keypad_start()
when the device is opened and ready, and disable it in
samsung_keypad_stop() when the device is closed. Remove the redundant
re-enabling of the interrupt at the end of samsung_keypad_stop().
Additionally, manually clear the pending interrupt status during system
resume when the device is closed to avoid immediate resume.
Fixes: 0fffed27f9 ("Input: samsung-keypad - Add samsung keypad driver")
Assisted-by: Antigravity:gemini-3.1-pro
Link: https://patch.msgid.link/20260713-samsung-kp-irq-v2-2-acc84b6daf9a@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When checking if the device can wake the system, we should pull the
device_may_wakeup() check to the caller instead of repeating it inside
the toggle_wakeup() handler. Furthermore, when configuring the wakeup,
we should safely ensure we write to the registers in the correct order:
configure the interrupt receiver before enabling the peripheral's wake
functionality, and vice-versa.
Assisted-by: Antigravity:gemini-3.1-pro
Link: https://patch.msgid.link/20260713-samsung-kp-irq-v2-1-acc84b6daf9a@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
charlieplex_keypad_scan_line() currently ignores the return value of
gpiod_direction_output() when setting the active output line for scanning.
If setting the GPIO direction fails (e.g. on I2C/SPI GPIO expanders or
hardware errors), the function continues to sleep and read input values
from an improperly configured GPIO line.
Fix this by capturing the return value of gpiod_direction_output() and
returning the error code immediately if it fails.
Fixes: 2ca45e57ea ("Input: charlieplex_keypad - add GPIO charlieplex keypad")
Signed-off-by: Surendra Singh Chouhan <kr494167@gmail.com>
Link: https://patch.msgid.link/20260723022943.9337-1-kr494167@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The firmware record parser checks that the record address starts within
the programmable map, but does not check that the complete record data
fits in that map. A record near the end of the map can therefore make
the copy to pmap exceed its destination span.
Check the record length against the remaining programmable map range
before copying the record data.
Fixes: 7b5bb55d0d ("Input: add support for Azoteq IQS550/572/525")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260715083850.32155-1-pengpeng@iscas.ac.cn
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver implements debounce protection using a timer-based mechanism:
when a key interrupt occurs, a timer is scheduled to verify the key state
after DEBOUNCE_TIME before reporting the event. This works well during
normal operation.
However, key press events can be lost during system resume on platforms
like i.MX8MQ-EVK because:
1. During the no_irq resume phase, PCIe driver restoration can take up to
200ms with IRQs disabled.
2. The power key interrupt remains pending during the no_irq phase.
3. If the key is released before IRQs are re-enabled, the timer eventually
runs but sees the key as released and skips reporting the event.
To prevent event loss during system suspend, set a pending_press flag in
the interrupt handler and report the press event from the timer callback
when the flag is set. This avoids out-of-order event delivery and keeps
the existing timer-based debounce mechanism for normal operation.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260715-b4-pwrkey-v5-4-07e7353c319e@oss.nxp.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In preparation for removing the strlcat() API[1], replace its five
uses with a small append helper built on strnlen() and strscpy().
The five calls append device name fragments to a basename buffer
that grows in place across the setup functions. The helper takes
the same arguments as strlcat() and writes the same bytes, including
when a fragment is truncated.
Link: https://github.com/KSPP/linux/issues/370 [1]
Signed-off-by: Ian Bridges <icb@fastmail.org>
Link: https://patch.msgid.link/albg4Rv7QxvLJD05@dev
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver currently sets only the overflow interrupt enable bit
(OVR_FLOW_IEN) in the configuration register, leaving the overflow
mode bit (OVR_FLOW_M) at its default value of 0.
According to the TCA8418 datasheet (SCPS215G, Section 8.6.4.1
"Overflow Errata - Description"), both OVR_FLOW_M (Bit_5) and
OVR_FLOW_IEN (Bit_3) must be set high for the overflow interrupt
to be generated. If only OVR_FLOW_IEN is set, FIFO overflow events
are silently lost without notifying the host.
Fix this by setting OVR_FLOW_M alongside OVR_FLOW_IEN in the
configuration register.
Signed-off-by: Zhian Liang <liangzhan5dev@gmail.com>
Link: https://patch.msgid.link/20260529013900.43854-1-liangzhan5dev@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In mms114_setup_regs(), the driver mistakenly uses props->max_x instead
of props->max_y when configuring the low bits of the Y resolution
(MMS114_Y_RESOLUTION).
Fix this by using the correct property.
Fixes: 07b8481d4a ("Input: add MELFAS mms114 touchscreen driver")
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/20260704060115.353049-3-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver defines the I2C packet layout using C bitfields in struct
mms114_touch. This is not portable as the layout of bitfields within a
byte is compiler-dependent and varies with endianness. On Big Endian
systems, the fields will be parsed incorrectly.
Fix this by redefining struct mms114_touch with plain u8 fields and
introducing bitwise macros to extract the values portably.
Reported-by: sashiko-bot@kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/20260704060115.353049-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In preparation for removing the strlcat() API[1], replace its uses in
i8042-acpipnpio.h.
i8042_pnp_id_to_string() accumulates a variable number of PNP ids in
a loop, which is what seq_buf is for. The kbd and aux probe functions
build a name from at most three parts that are all known up front, so
the whole construction becomes a single scnprintf() there.
Link: https://github.com/KSPP/linux/issues/370 [1]
Signed-off-by: Ian Bridges <icb@fastmail.org>
Link: https://patch.msgid.link/akyW4xkvCCROM0SE@dev
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull input fixes from Dmitry Torokhov:
- fix MELFAS MMS114 touchscreen driver to reject invalid touch IDs and
avoid multi-touch slot corruption
- fix a crash in the Sega Dreamcast (Maple) mouse driver when opening
the device, caused by missing driver data
- fixes for Maple drivers (keyboard, mouse, joystick) to properly order
setting driver data and device registration to avoid races
* tag 'input-for-v7.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: mms114 - fix multi-touch slot corruption
Input: maple_keyb - set driver data before registering input device
Input: maplecontrol - set driver data before registering input device
Input: maplemouse - set driver data before registering input device
Input: maplemouse - fix NULL pointer dereference in open()
If the touchscreen controller reports a touch ID of 0, the driver
calculates the slot ID as touch->id - 1, which underflows to UINT_MAX.
This is passed to input_mt_slot() as -1.
Since the input core ignores negative slot values, the active slot remains
unchanged. The driver then reports the touch coordinates for the previously
active slot, corrupting its state.
Fix this by rejecting touch reports with ID 0.
Fixes: 07b8481d4a ("Input: add MELFAS mms114 touchscreen driver")
Cc: stable@vger.kernel.org
Reported-by: sashiko-bot@kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Link: https://patch.msgid.link/20260704060115.353049-1-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Set maple driver data before calling input_register_device() to
ensure that it is available if the device is opened immediately and
the callback is triggered.
Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Commit 555c765b0c ("Input: mouse - drop unnecessary calls to
input_set_drvdata") dropped the input_set_drvdata() call in probe
because the data appeared to be unused. However, dc_mouse_open() and
dc_mouse_close() were using maple_get_drvdata(to_maple_dev(&dev->dev)).
This appears to be accessing the data attached to an instance of
maple_device structure, while in reality this actually retrieves driver
data from the input device's embedded struct device (doing invalid
conversion of input device structure to maple device). After
input_set_drvdata() was removed, that lookup started returning NULL and
opening the input device dereferences mse->mdev.
Restore input_set_drvdata() and convert open() and close() to use
input_get_drvdata() so the dependency is no longer hidden.
Fixes: 6b3480855a ("maple: input: fix up maple mouse driver")
Fixes: 555c765b0c ("Input: mouse - drop unnecessary calls to input_set_drvdata")
Signed-off-by: Florian Fuchs <fuchsfl@gmail.com>
Link: https://patch.msgid.link/20260628230715.2982552-1-fuchsfl@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Commit 44f9200699 ("Input: gscps2 - use guard notation when
acquiring spinlock") moved the receive loop into gscps2_read_data()
and gscps2_report_data().
While moving the code, it preserved the writes to
buffer[ps2port->append], but omitted the following producer index
update from the original loop:
ps2port->append = (ps2port->append + 1) & BUFFER_SIZE;
As a result, append never advances. Since gscps2_report_data() only
reports bytes while act != append, the receive buffer always appears
empty and no keyboard or mouse data reaches the serio core.
Restore the omitted index update.
Fixes: 44f9200699 ("Input: gscps2 - use guard notation when acquiring spinlock")
Cc: stable@vger.kernel.org # 6.13+
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Link: https://patch.msgid.link/460B5655BA580C60+20260624094739.850306-1-raoxu@uniontech.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Some touchpads (e.g. ThinkPad T14 Gen 1) have buggy firmware that reports
a register descriptor structure size that is too small for the number of
registers it claims to have in the presence map. The remaining bytes in
the structure are 0, which with the new strict bounds checking causes the
parser to fail with -EIO, aborting the device probe.
Tolerate such short reads by dropping the remaining (unparseable or
0-size) registers from the list instead of failing the probe,
preventing the driver from trying to use them.
Fixes: 0adb483fbf ("Input: rmi4 - refactor register descriptor parsing")
Reported-by: Barry K. Nathan <barryn@pobox.com>
Tested-by: Barry K. Nathan <barryn@pobox.com>
Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The register descriptor presence register is a packet register, which
means its bytes share a single RMI address. It does not occupy
consecutive addresses, and the register structure that follows it
is located at the next RMI address (presence_address + 1), not
(presence_address + presence_size).
Revert the incorrect address calculation introduced in commit
a98518e724.
Reported-by: "Barry K. Nathan" <barryn@pobox.com>
Tested-by: "Barry K. Nathan" <barryn@pobox.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The ISA1200 is a haptic feedback unit from Imagis Technology using two
motors for haptic feedback in mobile phones. Used in many mobile devices
c. 2012 including Samsung Galxy S Advance GT-I9070 (Janice), Samsung Beam
GT-I8350 (Gavini), LG Optimus 4X P880 and LG Optimus Vu P895.
The exact datasheet for the ISA1200 is not available; all data was modeled
based on available downstream kernel sources for various devices and
fragments of information scattered across the internet.
Tested-by: Linus Walleij <linusw@kernel.org> # GT-I9070 Janice
Signed-off-by: Linus Walleij <linusw@kernel.org>
Co-developed-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://patch.msgid.link/20260617070528.35006-3-clamor95@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The Synaptics touchpad on Dell Inspiron 3521 (PNP ID DLL0597) advertises
InterTouch / SMBus support, but is not on the SMBus passlist, so the
driver falls back to PS/2 and logs a hint to try
psmouse.synaptics_intertouch=1.
Add DLL0597 to smbus_pnp_ids so InterTouch is enabled automatically on
this model (and other Dells that reuse the same PNP ID).
Hardware: Dell Inc. Inspiron 3521 (board 06RYX8, BIOS A07),
Synaptics fw 8.1 / board id 2382, firmware_id "PNP: DLL0597 PNP0f13".
Signed-off-by: Shashwat Agrawal <shashwatagrawal473@gmail.com>
Link: https://patch.msgid.link/20260626130051.2574-1-shashwatagrawal473@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
rmi_f30_map_gpios() allocates gpioled_key_map with
min(gpioled_count, TRACKSTICK_RANGE_END) == at most 6 entries, but
rmi_f30_attention() iterates the full f30->gpioled_count (device query
register, range 0..31) and dereferences gpioled_key_map[i], and
input->keycodemax is set to the full gpioled_count while input->keycode
points at the 6-entry allocation.
A device that reports gpioled_count > 6 with GPIO support enabled
therefore causes an out-of-bounds read on the attention interrupt and
out-of-bounds read/write through the EVIOCGKEYCODE/EVIOCSKEYCODE ioctls,
which bound the index only against keycodemax. This is the same defect
as the F3A handler, which was copied from F30.
Size the keymap for the full gpioled_count; the mapping loop still
assigns only the first min(gpioled_count, TRACKSTICK_RANGE_END) entries.
Fixes: 3e64fcbdbd ("Input: synaptics-rmi4 - limit the range of what GPIOs are buttons")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Link: https://patch.msgid.link/20260614-b4-disp-818d6bda-v1-2-cf39a3615085@proton.me
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
rmi_f3a_initialize() takes the GPIO count from the device query register
(f3a->gpio_count = buf & RMI_F3A_GPIO_COUNT, range 0..127).
rmi_f3a_map_gpios() then allocates gpio_key_map with
min(gpio_count, TRACKSTICK_RANGE_END) == at most 6 entries, but
rmi_f3a_attention() iterates the full gpio_count and dereferences
gpio_key_map[i], and input->keycodemax is set to the full gpio_count
while input->keycode points at the 6-entry allocation.
A device that reports gpio_count > 6 therefore causes an out-of-bounds
read of gpio_key_map[] on every attention interrupt, and out-of-bounds
accesses through the input core's default keymap ioctls: EVIOCGKEYCODE
reads past the buffer (leaking adjacent slab memory to user space) and
EVIOCSKEYCODE writes a caller-controlled value past it, for any process
able to open the evdev node, since input_default_getkeycode() and
input_default_setkeycode() only bound the index against keycodemax.
Size the keymap for the full gpio_count. The mapping loop is unchanged:
it still assigns only the first min(gpio_count, TRACKSTICK_RANGE_END)
entries; the remaining slots stay KEY_RESERVED (devm_kcalloc zero-fills)
and are skipped when reporting.
Fixes: 9e4c596bfd ("Input: synaptics-rmi4 - add support for F3A")
Cc: stable@vger.kernel.org
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Link: https://patch.msgid.link/20260614-b4-disp-818d6bda-v1-1-cf39a3615085@proton.me
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
CAP1114 is a 14-channel capacitive touch sensor with 11 LED outputs
and hardware reset support.
The CAP1114 uses two control registers for LED output management and
requires two button status registers for touch input state reporting.
By default, channels CS8~CS14 operate as a single grouped block.
Set the corresponding register enable bit to enable these channels as
independent touch inputs. Note these channels share the input threshold
of the eighth entry, causing num_sensor_thresholds to differ from
num_channels.
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Link: https://patch.msgid.link/20260617150318.753148-11-jerrysteve1101@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Check of_property_present() before parsing microchip,calib-sensitivity
and microchip,signal-guard, so that models which do not support these
properties (e.g. CAP1114) skip the parsing entirely.
This prevents a potential buffer overflow in calib_sensitivities[8] and
signal_guard_inputs_mask when a model with more than 8 channels
(CAP1114 has 14) would otherwise call of_property_read_u32_array()
with num_channels as the element count.
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Link: https://patch.msgid.link/20260617150318.753148-9-jerrysteve1101@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Extend cap11xx_hw_model structure to support CAP1114 with
different register offsets and hardware characteristics:
- led_output_control_reg_base: different address on CAP1114
- sensor_input_reg_base: different address on CAP1114
- num_sensor_thresholds: separate value from num_channels for CAP1114
- has_repeat_en: repeat enable support, disabled by default on CAP1114
Include linux/bits.h, update the register operations related to LEDs.
Signed-off-by: Jun Yan <jerrysteve1101@gmail.com>
Link: https://patch.msgid.link/20260617150318.753148-8-jerrysteve1101@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
