In preparation for adding support for MT8195's HDMI reserved
DPI, add calls to clk_prepare_enable() / clk_disable_unprepare()
for the TVD clock: in this particular case, the aforementioned
clock is not (and cannot be) parented to neither pixel or engine
clocks hence it won't get enabled automatically by the clock
framework.
Please note that on all of the currently supported MediaTek
platforms, the TVD clock is always a parent of either pixel or
engine clocks, and this means that the common clock framework
is already enabling this clock before the children.
On such platforms, this commit will only increase the refcount
of the TVD clock without any functional change.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250217154836.108895-10-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Pull gpio fix from Bartosz Golaszewski:
- fix a buggy get_direction() retval check
* tag 'gpio-fixes-for-v6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: Fix Oops in gpiod_direction_input_nonotify()
Pull MIPS fix from Thomas Bogendoerfer:
"Fix fallout of /scripts/sorttable cleanup"
* tag 'mips-fixes_6.14_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Ignore relocs against __ex_table for relocatable kernel
Fix RCU warnings in override_creds and revert_creds by turning
the RCU pointer into a normal pointer using rcu_replace_pointer.
These warnings were previously private to the cred code, but due
to the move into the header file they are now polluting unrelated
subsystems.
Fixes: 49dffdfde4 ("cred: Add a light version of override/revert_creds()")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://lore.kernel.org/r/Z8QGQGW0IaSklKG7@gondor.apana.org.au
Signed-off-by: Christian Brauner <brauner@kernel.org>
On some SoCs, like MT8195 and MT8188, the DPI instance that is
reserved to the HDMI Transmitter uses a different clock topology.
In this case, the DPI is clocked by the HDMI IP, and this outputs
its clock to the MM input of dpi_pixel_clk, which is essential to
enable register access to the DPI IP.
Add a `clocked_by_hdmi` member to struct mtk_dpi_conf, and check
it to avoid enabling the DPI clocks in the mediatek-drm internal
.start() callback (and avoid disabing in the .stop() component
callback): this will make sure that the clock configuration
sequence is respected during display pipeline setup by following
the bridge ops between DPI and HDMI, where the HDMI driver is
expected to enable the clocks in the bridge's pre_enable(), and
DPI in the enable() cb.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Setting the TVD PLL clock requires to multiply the target pixel
clock by a specific constant factor to achieve the target PLL
frequency, and this is done to reduce jitter to acceptable levels.
On all MediaTek SoCs, the factor is not retrieved by any real kind
of calculation but rather by checking if the target pixel clock
is less than a specified frequency, hence assigning a function
pointer for just a bunch of if branches does enlarge the code
size for little reason.
Remove all SoC-specific functions, add a structure `mtk_dpi_factor`
that holds a clock frequency and corresponding PLL factor, and
declare the constraints for each SoC in form of an array of said
structure.
Instead of function pointers, this structure (and its size) is then
assigned to each SoC's platform data.
The "calculation" is then performed with a new static function
mtk_dpi_calculate_factor(dpi, mode_clk) that iterates through all
of the entries of the aforementioned array and returns the right
factor.
If no factor is found, the lowest possible factor is returned,
mimicking the same flow as all of the old per-SoC calculation
functions.
This commit brings no functional change.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250217154836.108895-4-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
This IP includes a Pattern Generator which is useful for debugging
and testing purposes: add the relevant register and bits to the
mtk_dpi_regs.h header, and implement support for it in mtk_dpi.
Adding this required to introduce a .debugfs_init() callback for
the DPI bridge, which creates a "dpi_test_pattern" file in the
directory of the appropriate connector.
The pattern generator can generate various internal patterns and
this submission includes support for:
- 256 or 1024 shades of gray in a Vertical or Horizontal Pattern
- Vertical Color Bars
- Frame border
- Dot Moire
This generator also supports filling the entire screen with one
custom color, but support for that is not included in this commit.
Enabling and disabling this generator can be done by sending a
string to the dpi_test_pattern debugfs file; the pattern is
expected to be formatted as follows:
<enable (1) or disable (0)> <pattern number>
where the pattern number can be a number from 0 to 7, excluding 5.
Of course 5 is excluded because that activates custom color fill
which, again, is not supported in this commit.
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250217154836.108895-3-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
When KVM is in protected mode, host calls to PSCI are proxied via EL2,
and cold entries from CPU_ON, CPU_SUSPEND, and SYSTEM_SUSPEND bounce
through __kvm_hyp_init_cpu() at EL2 before entering the host kernel's
entry point at EL1. While __kvm_hyp_init_cpu() initializes SPSR_EL2 for
the exception return to EL1, it does not initialize SCTLR_EL1.
Due to this, it's possible to enter EL1 with SCTLR_EL1 in an UNKNOWN
state. In practice this has been seen to result in kernel crashes after
CPU_ON as a result of SCTLR_EL1.M being 1 in violation of the initial
core configuration specified by PSCI.
Fix this by initializing SCTLR_EL1 for cold entry to the host kernel.
As it's necessary to write to SCTLR_EL12 in VHE mode, this
initialization is moved into __kvm_host_psci_cpu_entry() where we can
use write_sysreg_el1().
The remnants of the '__init_el2_nvhe_prepare_eret' macro are folded into
its only caller, as this is clearer than having the macro.
Fixes: cdf3671927 ("KVM: arm64: Intercept host's CPU_ON SMCs")
Reported-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Ahmed Genidi <ahmed.genidi@arm.com>
[ Mark: clarify commit message, handle E2H, move to C, remove macro ]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ahmed Genidi <ahmed.genidi@arm.com>
Cc: Ben Horgan <ben.horgan@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Leo Yan <leo.yan@arm.com>
Link: https://lore.kernel.org/r/20250227180526.1204723-3-mark.rutland@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
On CPUs without FEAT_E2H0, HCR_EL2.E2H is RES1, but may reset to an
UNKNOWN value out of reset and consequently may not read as 1 unless it
has been explicitly initialized.
We handled this for the head.S boot code in commits:
3944382fa6 ("arm64: Treat HCR_EL2.E2H as RES1 when ID_AA64MMFR4_EL1.E2H0 is negative")
b3320142f3 ("arm64: Fix early handling of FEAT_E2H0 not being implemented")
Unfortunately, we forgot to apply a similar fix to the KVM PSCI entry
points used when relaying CPU_ON, CPU_SUSPEND, and SYSTEM SUSPEND. When
KVM is entered via these entry points, the value of HCR_EL2.E2H may be
consumed before it has been initialized (e.g. by the 'init_el2_state'
macro).
Initialize HCR_EL2.E2H early in these paths such that it can be consumed
reliably. The existing code in head.S is factored out into a new
'init_el2_hcr' macro, and this is used in the __kvm_hyp_init_cpu()
function common to all the relevant PSCI entry points.
For clarity, I've tweaked the assembly used to check whether
ID_AA64MMFR4_EL1.E2H0 is negative. The bitfield is extracted as a signed
value, and this is checked with a signed-greater-or-equal (GE) comparison.
As the hyp code will reconfigure HCR_EL2 later in ___kvm_hyp_init(), all
bits other than E2H are initialized to zero in __kvm_hyp_init_cpu().
Fixes: 3944382fa6 ("arm64: Treat HCR_EL2.E2H as RES1 when ID_AA64MMFR4_EL1.E2H0 is negative")
Fixes: b3320142f3 ("arm64: Fix early handling of FEAT_E2H0 not being implemented")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ahmed Genidi <ahmed.genidi@arm.com>
Cc: Ben Horgan <ben.horgan@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250227180526.1204723-2-mark.rutland@arm.com
[maz: fixed LT->GE thinko]
Signed-off-by: Marc Zyngier <maz@kernel.org>
snd_seq_client_use_ptr() is supposed to return the snd_seq_client
object for the given client ID, and it tries to handle the module
auto-loading when no matching object is found. Although the module
handling is performed only conditionally with "!in_interrupt()", this
condition may be fragile, e.g. when the code is called from the ALSA
timer callback where the spinlock is temporarily disabled while the
irq is disabled. Then his doesn't fit well and spews the error about
sleep from invalid context, as complained recently by syzbot.
Also, in general, handling the module-loading at each time if no
matching object is found is really an overkill. It can be still
useful when performed at the top-level ioctl or proc reads, but it
shouldn't be done at event delivery at all.
For addressing the issues above, this patch disables the module
handling in snd_seq_client_use_ptr() in normal cases like event
deliveries, but allow only in limited and safe situations.
A new function client_load_and_use_ptr() is used for the cases where
the module loading can be done safely, instead.
Reported-by: syzbot+4cb9fad083898f54c517@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/67c272e5.050a0220.dc10f.0159.GAE@google.com
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250301114530.8975-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull smb client fix from Steve French:
"Fix SMB1 netfs client regression"
* tag 'v6.14-rc4-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix the smb1 readv callback to correctly call netfs
Pull arm64 fixes from Will Deacon:
"Ryan's been hard at work finding and fixing mm bugs in the arm64 code,
so here's a small crop of fixes for -rc5.
The main changes are to fix our zapping of non-present PTEs for
hugetlb entries created using the contiguous bit in the page-table
rather than a block entry at the level above. Prior to these fixes, we
were pulling the contiguous bit back out of the PTE in order to
determine the size of the hugetlb page but this is clearly bogus if
the thing isn't present and consequently both the clearing of the
PTE(s) and the TLB invalidation were unreliable.
Although the problem was found by code inspection, we really don't
want this sitting around waiting to trigger and the changes are CC'd
to stable accordingly.
Note that the diffstat looks a lot worse than it really is;
huge_ptep_get_and_clear() now takes a size argument from the core code
and so all the arch implementations of that have been updated in a
pretty mechanical fashion.
- Fix a sporadic boot failure due to incorrect randomization of the
linear map on systems that support it
- Fix the zapping (both clearing the entries *and* invalidating the
TLB) of hugetlb PTEs constructed using the contiguous bit"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: hugetlb: Fix flush_hugetlb_tlb_range() invalidation level
arm64: hugetlb: Fix huge_ptep_get_and_clear() for non-present ptes
mm: hugetlb: Add huge page size param to huge_ptep_get_and_clear()
arm64/mm: Fix Boot panic on Ampere Altra
There is a fairly obvious race between perf_init_event() doing
idr_find() and perf_pmu_register() doing idr_alloc() with an
incompletely initialized PMU pointer.
Avoid by doing idr_alloc() on a NULL pointer to register the id, and
swizzling the real struct pmu pointer at the end using idr_replace().
Also making sure to not set struct pmu members after publishing
the struct pmu, duh.
[ introduce idr_cmpxchg() in order to better handle the idr_replace()
error case -- if it were to return an unexpected pointer, it will
already have replaced the value and there is no going back. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20241104135517.858805880@infradead.org
Commit a63fbed776 ("perf/tracing/cpuhotplug: Fix locking order")
placed pmus_lock inside pmus_srcu, this makes perf_pmu_unregister()
trip lockdep.
Move the locking about such that only pmu_idr and pmus (list) are
modified while holding pmus_lock. This avoids doing synchronize_srcu()
while holding pmus_lock and all is well again.
Fixes: a63fbed776 ("perf/tracing/cpuhotplug: Fix locking order")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20241104135517.679556858@infradead.org
Pull ata fixes from Niklas Cassel:
- Fix a regression where the enablement of the PHYs would be skipped
for device trees without any port child nodes (me)
- Revert ATA_QUIRK_NOLPM for Samsung SSD 870 QVO drives, as it stops
systems from entering lower package states. LPM works on newer
firmware versions. We will need a more refined quirk that only
targets the older firmware versions (me)
* tag 'ata-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
Revert "ata: libata-core: Add ATA_QUIRK_NOLPM for Samsung SSD 870 QVO drives"
ata: ahci: Make ahci_ignore_port() handle empty mask_port_map
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix TCR_EL2 configuration to not use the ASID in TTBR1_EL2 and not
mess-up T1SZ/PS by using the HCR_EL2.E2H==0 layout.
- Bring back the VMID allocation to the vcpu_load phase, ensuring
that we only setup VTTBR_EL2 once on VHE. This cures an ugly race
that would lead to running with an unallocated VMID.
RISC-V:
- Fix hart status check in SBI HSM extension
- Fix hart suspend_type usage in SBI HSM extension
- Fix error returned by SBI IPI and TIME extensions for unsupported
function IDs
- Fix suspend_type usage in SBI SUSP extension
- Remove unnecessary vcpu kick after injecting interrupt via IMSIC
guest file
x86:
- Fix an nVMX bug where KVM fails to detect that, after nested
VM-Exit, L1 has a pending IRQ (or NMI).
- To avoid freeing the PIC while vCPUs are still around, which would
cause a NULL pointer access with the previous patch, destroy vCPUs
before any VM-level destruction.
- Handle failures to create vhost_tasks"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: retry nx_huge_page_recovery_thread creation
vhost: return task creation error instead of NULL
KVM: nVMX: Process events on nested VM-Exit if injectable IRQ or NMI is pending
KVM: x86: Free vCPUs before freeing VM state
riscv: KVM: Remove unnecessary vcpu kick
KVM: arm64: Ensure a VMID is allocated before programming VTTBR_EL2
KVM: arm64: Fix tcr_el2 initialisation in hVHE mode
riscv: KVM: Fix SBI sleep_type use
riscv: KVM: Fix SBI TIME error generation
riscv: KVM: Fix SBI IPI error generation
riscv: KVM: Fix hart suspend_type use
riscv: KVM: Fix hart suspend status check
This reverts commit cc77e2ce18.
It was reported that adding ATA_QUIRK_NOLPM for Samsung SSD 870 QVO drives
breaks entering lower package states for certain systems.
It turns out that Samsung SSD 870 QVO actually has working LPM when using
a recent SSD firmware version.
The author of commit cc77e2ce18 ("ata: libata-core: Add ATA_QUIRK_NOLPM
for Samsung SSD 870 QVO drives") reported himself that only older SSD
firmware versions have broken LPM:
https://lore.kernel.org/stable/93c10d38-718c-459d-84a5-4d87680b4da7@debian.org/
Unfortunately, he did not specify which older firmware version he was using
which had broken LPM.
Let's revert this quirk, which has FW version field specified as NULL
(which means that it applies for all Samsung SSD 870 QVO firmware versions)
for now. Once the author reports which older firmware version(s) that are
broken, we can create a more fine grained quirk, which populates the FW
version field accordingly.
Fixes: cc77e2ce18 ("ata: libata-core: Add ATA_QUIRK_NOLPM for Samsung SSD 870 QVO drives")
Reported-by: Dieter Mummenschanz <dmummenschanz@web.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219747
Link: https://lore.kernel.org/r/20250228122603.91814-2-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
A VMM may send a non-fatal signal to its threads, including vCPU tasks,
at any time, and thus may signal vCPU tasks during KVM_RUN. If a vCPU
task receives the signal while its trying to spawn the huge page recovery
vhost task, then KVM_RUN will fail due to copy_process() returning
-ERESTARTNOINTR.
Rework call_once() to mark the call complete if and only if the called
function succeeds, and plumb the function's true error code back to the
call_once() invoker. This provides userspace with the correct, non-fatal
error code so that the VMM doesn't terminate the VM on -ENOMEM, and allows
subsequent KVM_RUN a succeed by virtue of retrying creation of the NX huge
page task.
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
[implemented the kvm user side]
Signed-off-by: Keith Busch <kbusch@kernel.org>
Message-ID: <20250227230631.303431-3-kbusch@meta.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
del_vqs() frees virtqueues, therefore cfv->vq_tx pointer should be checked
for NULL before calling it, not cfv->vdev. Also the current implementation
is redundant because the pointer cfv->vdev is dereferenced before it is
checked for NULL.
Fix this by checking cfv->vq_tx for NULL instead of cfv->vdev before
calling del_vqs().
Fixes: 0d2e1a2926 ("caif_virtio: Introduce caif over virtio")
Signed-off-by: Vitaliy Shevtsov <v.shevtsov@mt-integration.ru>
Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Link: https://patch.msgid.link/20250227184716.4715-1-v.shevtsov@mt-integration.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull thermal control fixes from Rafael Wysocki:
"These fix the processing of DT thermal properties and the Power
Allocator thermal governor:
- Fix parsing cooling-maps in DT for trip points with more than one
cooling device (Rafael Wysocki)
- Fix granted_power computation in the Power Allocator thermal
governor and make it update total_weight on configuration changes
after the thermal zone has been registered (Yu-Che Cheng)"
* tag 'thermal-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: gov_power_allocator: Update total_weight on bind and cdev updates
thermal/of: Fix cdev lookup in thermal_of_should_bind()
thermal: gov_power_allocator: Fix incorrect calculation in divvy_up_power()
Pull power management fix from Rafael Wysocki:
"Fix the handling of processors that stop the TSC in deeper C-states in
the intel_idle driver (Thomas Gleixner)"
* tag 'pm-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
intel_idle: Handle older CPUs, which stop the TSC in deeper C states, correctly
Pull x86 fixes from Ingo Molnar:
- Fix conflicts between devicetree and ACPI SMP discovery & setup
- Fix a warm-boot lockup on AMD SC1100 SoC systems
- Fix a W=1 build warning related to x86 IRQ trace event setup
- Fix a kernel-doc warning
* tag 'x86-urgent-2025-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry: Fix kernel-doc warning
x86/irq: Define trace events conditionally
x86/CPU: Fix warm boot hang regression on AMD SC1100 SoC systems
x86/of: Don't use DTB for SMP setup if ACPI is enabled
Pull scheduler fix from Ingo Molnar:
"Prevent cond_resched() based preemption when interrupts are disabled,
on PREEMPT_NONE and PREEMPT_VOLUNTARY kernels"
* tag 'sched-urgent-2025-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Prevent rescheduling when interrupts are disabled
Pull perf event fixes from Ingo Molnar:
"Miscellaneous perf events fixes and a minor HW enablement change:
- Fix missing RCU protection in perf_iterate_ctx()
- Fix pmu_ctx_list ordering bug
- Reject the zero page in uprobes
- Fix a family of bugs related to low frequency sampling
- Add Intel Arrow Lake U CPUs to the generic Arrow Lake RAPL support
table
- Fix a lockdep-assert false positive in uretprobes"
* tag 'perf-urgent-2025-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
uprobes: Remove too strict lockdep_assert() condition in hprobe_expire()
perf/x86/rapl: Add support for Intel Arrow Lake U
perf/x86/intel: Use better start period for frequency mode
perf/core: Fix low freq setting via IOC_PERIOD
perf/x86: Fix low freqency setting issue
uprobes: Reject the shared zeropage in uprobe_write_opcode()
perf/core: Order the PMU list to fix warning about unordered pmu_ctx_list
perf/core: Add RCU read lock protection to perf_iterate_ctx()
Pull objtool fixes from Ingo Molnar:
"Fix an objtool false positive, and objtool related build warnings that
happens on PIE-enabled architectures such as LoongArch"
* tag 'objtool-urgent-2025-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Add bch2_trans_unlocked_or_in_restart_error() to bcachefs noreturns
objtool: Fix C jump table annotations for Clang
vmlinux.lds: Ensure that const vars with relocations are mapped R/O
In __udp_gso_segment the skb destructor is removed before segmenting the
skb but the socket reference is kept as-is. This is an issue if the
original skb is later orphaned as we can hit the following bug:
kernel BUG at ./include/linux/skbuff.h:3312! (skb_orphan)
RIP: 0010:ip_rcv_core+0x8b2/0xca0
Call Trace:
ip_rcv+0xab/0x6e0
__netif_receive_skb_one_core+0x168/0x1b0
process_backlog+0x384/0x1100
__napi_poll.constprop.0+0xa1/0x370
net_rx_action+0x925/0xe50
The above can happen following a sequence of events when using
OpenVSwitch, when an OVS_ACTION_ATTR_USERSPACE action precedes an
OVS_ACTION_ATTR_OUTPUT action:
1. OVS_ACTION_ATTR_USERSPACE is handled (in do_execute_actions): the skb
goes through queue_gso_packets and then __udp_gso_segment, where its
destructor is removed.
2. The segments' data are copied and sent to userspace.
3. OVS_ACTION_ATTR_OUTPUT is handled (in do_execute_actions) and the
same original skb is sent to its path.
4. If it later hits skb_orphan, we hit the bug.
Fix this by also removing the reference to the socket in
__udp_gso_segment.
Fixes: ad405857b1 ("udp: better wmem accounting on gso")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Link: https://patch.msgid.link/20250226171352.258045-1-atenart@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We shouldn't be setting incompatible bits or the incompatible version
field unless explicitly request or allowed - otherwise we break mounting
with old kernels or userspace.
Reported-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Pull locking fix from Ingo Molnar:
"Fix an rcuref_put() slowpath race"
* tag 'locking-urgent-2025-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
rcuref: Plug slowpath race in rcuref_put()
Pull tracing fixes from Steven Rostedt:
- Fix crash from bad histogram entry
An error path in the histogram creation could leave an entry in a
link list that gets freed. Then when a new entry is added it can
cause a u-a-f bug. This is fixed by restructuring the code so that
the histogram is consistent on failure and everything is cleaned up
appropriately.
- Fix fprobe self test
The fprobe self test relies on no function being attached by ftrace.
BPF programs can attach to functions via ftrace and systemd now does
so. This causes those functions to appear in the enabled_functions
list which holds all functions attached by ftrace. The selftest also
uses that file to see if functions are being connected correctly. It
counts the functions in the file, but if there's already functions in
the file, it fails. Instead, add the number of functions in the file
at the start of the test to all the calculations during the test.
- Fix potential division by zero of the function profiler stddev
The calculated divisor that calculates the standard deviation of the
function times can overflow. If the overflow happens to land on zero,
that can cause a division by zero. Check for zero from the
calculation before doing the division.
TODO: Catch when it ever overflows and report it accordingly. For
now, just prevent the system from crashing.
* tag 'trace-v6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Avoid potential division by zero in function_stat_show()
selftests/ftrace: Let fprobe test consider already enabled functions
tracing: Fix bad hist from corrupting named_triggers list
