The assembler portions of fp-ptrace are passed feature flags by the C code
indicating which architectural features are supported. Currently these use
an entire register for each flag which is wasteful and gets cumbersome as
new flags are added. Switch to using flag bits in a single register to make
things easier to maintain.
No functional change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241112-arm64-fp-ptrace-fpmr-v2-1-250b57c61254@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Currently we don't build the PAC selftests when building with LLVM=1 since
we attempt to test for PAC support in the toolchain before we've set up the
build system to point at LLVM in lib.mk, which has to be one of the last
things in the Makefile.
Since all versions of LLVM supported for use with the kernel have PAC
support we can just sidestep the issue by just assuming PAC is there when
doing a LLVM=1 build.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241111-arm64-selftest-pac-clang-v1-1-08599ceee418@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
We don't currently validate that we exit streaming mode and clear ZA when
we enter a signal handler. Add simple checks for this in the SSVE and ZA
tests.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241106-arm64-fpmr-signal-test-v1-1-31fa34ce58fe@kernel.org
[catalin.marinas@arm.com: Use %lx in fprintf() as uint64_t seems to be unsigned long in glibc]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Check number of paths by fib_info_num_path(),
and update_or_create_fnhe() for every path.
Problem is that pmtu is cached only for the oif
that has received icmp message "need to frag",
other oifs will still try to use "default" iface mtu.
An example topology showing the problem:
| host1
+---------+
| dummy0 | 10.179.20.18/32 mtu9000
+---------+
+-----------+----------------+
+---------+ +---------+
| ens17f0 | 10.179.2.141/31 | ens17f1 | 10.179.2.13/31
+---------+ +---------+
| (all here have mtu 9000) |
+------+ +------+
| ro1 | 10.179.2.140/31 | ro2 | 10.179.2.12/31
+------+ +------+
| |
---------+------------+-------------------+------
|
+-----+
| ro3 | 10.10.10.10 mtu1500
+-----+
|
========================================
some networks
========================================
|
+-----+
| eth0| 10.10.30.30 mtu9000
+-----+
| host2
host1 have enabled multipath and
sysctl net.ipv4.fib_multipath_hash_policy = 1:
default proto static src 10.179.20.18
nexthop via 10.179.2.12 dev ens17f1 weight 1
nexthop via 10.179.2.140 dev ens17f0 weight 1
When host1 tries to do pmtud from 10.179.20.18/32 to host2,
host1 receives at ens17f1 iface an icmp packet from ro3 that ro3 mtu=1500.
And host1 caches it in nexthop exceptions cache.
Problem is that it is cached only for the iface that has received icmp,
and there is no way that ro3 will send icmp msg to host1 via another path.
Host1 now have this routes to host2:
ip r g 10.10.30.30 sport 30000 dport 443
10.10.30.30 via 10.179.2.12 dev ens17f1 src 10.179.20.18 uid 0
cache expires 521sec mtu 1500
ip r g 10.10.30.30 sport 30033 dport 443
10.10.30.30 via 10.179.2.140 dev ens17f0 src 10.179.20.18 uid 0
cache
So when host1 tries again to reach host2 with mtu>1500,
if packet flow is lucky enough to be hashed with oif=ens17f1 its ok,
if oif=ens17f0 it blackholes and still gets icmp msgs from ro3 to ens17f1,
until lucky day when ro3 will send it through another flow to ens17f0.
Signed-off-by: Vladimir Vdovin <deliran@verdict.gg>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20241108093427.317942-1-deliran@verdict.gg
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The netconsole selftest relies on the availability of the netdevsim module.
To ensure the test can run correctly, we need to check if the netdevsim
module is either loaded or built-in before proceeding.
Update the netconsole selftest to check for the existence of
the /sys/bus/netdevsim/new_device file before running the test. If the
file is not found, the test is skipped with an explanation that the
CONFIG_NETDEVSIM kernel config option may not be enabled.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241108-netcon_selftest_deps-v1-1-1789cbf3adcd@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add an epoll busy poll test using netdevsim.
This test is comprised of:
- busy_poller (via busy_poller.c)
- busy_poll_test.sh which loads netdevsim, sets up network namespaces,
and runs busy_poller to receive data and socat to send data.
The selftest tests two different scenarios:
- busy poll (the pre-existing version in the kernel)
- busy poll with suspend enabled (what this series adds)
The data transmit is a 1MiB temporary file generated from /dev/urandom
and the test is considered passing if the md5sum of the input file to
socat matches the md5sum of the output file from busy_poller.
netdevsim was chosen instead of veth due to netdevsim's support for
netdev-genl.
For now, this test uses the functionality that netdevsim provides. In the
future, perhaps netdevsim can be extended to emulate device IRQs to more
thoroughly test all pre-existing kernel options (like defer_hard_irqs)
and suspend.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Co-developed-by: Martin Karsten <mkarsten@uwaterloo.ca>
Signed-off-by: Martin Karsten <mkarsten@uwaterloo.ca>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20241109050245.191288-6-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Only RX side for now and small message to test the setup.
In the future, we can extend it to TX side and to testing
both sides with a couple of megs of data.
make \
-C tools/testing/selftests \
TARGETS="drivers/hw/net" \
install INSTALL_PATH=~/tmp/ksft
scp ~/tmp/ksft ${HOST}:
scp ~/tmp/ksft ${PEER}:
cfg+="NETIF=${DEV}\n"
cfg+="LOCAL_V6=${HOST_IP}\n"
cfg+="REMOTE_V6=${PEER_IP}\n"
cfg+="REMOTE_TYPE=ssh\n"
cfg+="REMOTE_ARGS=root@${PEER}\n"
echo -e "$cfg" | ssh root@${HOST} "cat > ksft/drivers/net/net.config"
ssh root@${HOST} "cd ksft && ./run_kselftest.sh -t drivers/net:devmem.py"
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20241107181211.3934153-13-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the next patch the hard-coded queue numbers are gonna be removed.
So introduce some initial support for ethtool YNL and use
it to enable header split.
Also, tcp-data-split requires latest ethtool which is unlikely
to be present in the distros right now.
(ideally, we should not shell out to ethtool at all).
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20241107181211.3934153-9-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Soft lockups have been observed on a cluster of Linux-based edge routers
located in a highly dynamic environment. Using the `bird` service, these
routers continuously update BGP-advertised routes due to frequently
changing nexthop destinations, while also managing significant IPv6
traffic. The lockups occur during the traversal of the multipath
circular linked-list in the `fib6_select_path` function, particularly
while iterating through the siblings in the list. The issue typically
arises when the nodes of the linked list are unexpectedly deleted
concurrently on a different core—indicated by their 'next' and
'previous' elements pointing back to the node itself and their reference
count dropping to zero. This results in an infinite loop, leading to a
soft lockup that triggers a system panic via the watchdog timer.
Apply RCU primitives in the problematic code sections to resolve the
issue. Where necessary, update the references to fib6_siblings to
annotate or use the RCU APIs.
Include a test script that reproduces the issue. The script
periodically updates the routing table while generating a heavy load
of outgoing IPv6 traffic through multiple iperf3 clients. It
consistently induces infinite soft lockups within a couple of minutes.
Kernel log:
0 [ffffbd13003e8d30] machine_kexec at ffffffff8ceaf3eb
1 [ffffbd13003e8d90] __crash_kexec at ffffffff8d0120e3
2 [ffffbd13003e8e58] panic at ffffffff8cef65d4
3 [ffffbd13003e8ed8] watchdog_timer_fn at ffffffff8d05cb03
4 [ffffbd13003e8f08] __hrtimer_run_queues at ffffffff8cfec62f
5 [ffffbd13003e8f70] hrtimer_interrupt at ffffffff8cfed756
6 [ffffbd13003e8fd0] __sysvec_apic_timer_interrupt at ffffffff8cea01af
7 [ffffbd13003e8ff0] sysvec_apic_timer_interrupt at ffffffff8df1b83d
-- <IRQ stack> --
8 [ffffbd13003d3708] asm_sysvec_apic_timer_interrupt at ffffffff8e000ecb
[exception RIP: fib6_select_path+299]
RIP: ffffffff8ddafe7b RSP: ffffbd13003d37b8 RFLAGS: 00000287
RAX: ffff975850b43600 RBX: ffff975850b40200 RCX: 0000000000000000
RDX: 000000003fffffff RSI: 0000000051d383e4 RDI: ffff975850b43618
RBP: ffffbd13003d3800 R8: 0000000000000000 R9: ffff975850b40200
R10: 0000000000000000 R11: 0000000000000000 R12: ffffbd13003d3830
R13: ffff975850b436a8 R14: ffff975850b43600 R15: 0000000000000007
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
9 [ffffbd13003d3808] ip6_pol_route at ffffffff8ddb030c
10 [ffffbd13003d3888] ip6_pol_route_input at ffffffff8ddb068c
11 [ffffbd13003d3898] fib6_rule_lookup at ffffffff8ddf02b5
12 [ffffbd13003d3928] ip6_route_input at ffffffff8ddb0f47
13 [ffffbd13003d3a18] ip6_rcv_finish_core.constprop.0 at ffffffff8dd950d0
14 [ffffbd13003d3a30] ip6_list_rcv_finish.constprop.0 at ffffffff8dd96274
15 [ffffbd13003d3a98] ip6_sublist_rcv at ffffffff8dd96474
16 [ffffbd13003d3af8] ipv6_list_rcv at ffffffff8dd96615
17 [ffffbd13003d3b60] __netif_receive_skb_list_core at ffffffff8dc16fec
18 [ffffbd13003d3be0] netif_receive_skb_list_internal at ffffffff8dc176b3
19 [ffffbd13003d3c50] napi_gro_receive at ffffffff8dc565b9
20 [ffffbd13003d3c80] ice_receive_skb at ffffffffc087e4f5 [ice]
21 [ffffbd13003d3c90] ice_clean_rx_irq at ffffffffc0881b80 [ice]
22 [ffffbd13003d3d20] ice_napi_poll at ffffffffc088232f [ice]
23 [ffffbd13003d3d80] __napi_poll at ffffffff8dc18000
24 [ffffbd13003d3db8] net_rx_action at ffffffff8dc18581
25 [ffffbd13003d3e40] __do_softirq at ffffffff8df352e9
26 [ffffbd13003d3eb0] run_ksoftirqd at ffffffff8ceffe47
27 [ffffbd13003d3ec0] smpboot_thread_fn at ffffffff8cf36a30
28 [ffffbd13003d3ee8] kthread at ffffffff8cf2b39f
29 [ffffbd13003d3f28] ret_from_fork at ffffffff8ce5fa64
30 [ffffbd13003d3f50] ret_from_fork_asm at ffffffff8ce03cbb
Fixes: 66f5d6ce53 ("ipv6: replace rwlock with rcu and spinlock in fib6_table")
Reported-by: Adrian Oliver <kernel@aoliver.ca>
Signed-off-by: Omid Ehtemam-Haghighi <omid.ehtemamhaghighi@menlosecurity.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Ido Schimmel <idosch@idosch.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Simon Horman <horms@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20241106010236.1239299-1-omid.ehtemamhaghighi@menlosecurity.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 49f59573e9 ("selftests/mm: Enable pkey_sighandler_tests
on arm64"), pkey_sighandler_tests.c (which includes pkey-arm64.h via
pkey-helpers.h) ends up compiled for arm64. Since it doesn't use
aarch64_write_signal_pkey(), the compiler warns:
In file included from pkey-helpers.h:106,
from pkey_sighandler_tests.c:31:
pkey-arm64.h:130:13: warning: ‘aarch64_write_signal_pkey’ defined but not used [-Wunused-function]
130 | static void aarch64_write_signal_pkey(ucontext_t *uctxt, u64 pkey)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
Make the aarch64_write_signal_pkey() a 'static inline void' function to
avoid the compiler warning.
Fixes: f5b5ea51f7 ("selftests: mm: make protection_keys test work on arm64")
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Joey Gouly <joey.gouly@arm.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Link: https://lore.kernel.org/r/20241108110549.1185923-1-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
While some assemblers (including the LLVM assembler I mostly use) will
happily accept SMSTART as an instruction by default others, specifically
gas, require that any architecture extensions be explicitly enabled.
The assembler SME test programs use manually encoded helpers for the new
instructions but no SMSTART helper is defined, only SM and ZA specific
variants. Unfortunately the irritators that were just added use plain
SMSTART so on stricter assemblers these fail to build:
za-test.S:160: Error: selected processor does not support `smstart'
Switch to using SMSTART ZA via the manually encoded smstart_za macro we
already have defined.
Fixes: d65f27d240 ("kselftest/arm64: Implement irritators for ZA and ZT")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241108-arm64-selftest-asm-error-v1-1-7ce27b42a677@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Pull sched_ext fixes from Tejun Heo:
- The fair sched class currently has a bug where its balance() returns
true telling the sched core that it has tasks to run but then NULL
from pick_task(). This makes sched core call sched_ext's pick_task()
without preceding balance() which can lead to stalls in partial mode.
For now, work around by detecting the condition and forcing the CPU
to go through another scheduling cycle.
- Add a missing newline to an error message and fix drgn introspection
tool which went out of sync.
* tag 'sched_ext-for-6.12-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Handle cases where pick_task_scx() is called without preceding balance_scx()
sched_ext: Update scx_show_state.py to match scx_ops_bypass_depth's new type
sched_ext: Add a missing newline at the end of an error message
The number of slabs can easily exceed the hard coded MAX_SLABS in the
slabinfo tool, causing it to overwrite memory and crash.
Increase the value of MAX_SLABS, and check if that has been exceeded for
each new slab, instead of at the end when it's already too late. Also
move the check for MAX_ALIASES into the loop body.
Link: https://lkml.kernel.org/r/20241031105534.565533-1-marc.c.dionne@gmail.com
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
* kvm-arm64/mmio-sea:
: Fix for SEA injection in response to MMIO
:
: Fix + test coverage for SEA injection in response to an unhandled MMIO
: exit to userspace. Naturally, if userspace decides to abort an MMIO
: instruction KVM shouldn't continue with instruction emulation...
KVM: arm64: selftests: Add tests for MMIO external abort injection
KVM: arm64: selftests: Convert to kernel's ESR terminology
tools: arm64: Grab a copy of esr.h from kernel
KVM: arm64: Don't retire aborted MMIO instruction
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
* kvm-arm64/misc:
: Miscellaneous updates
:
: - Drop useless check against vgic state in ICC_CLTR_EL1.SEIS read
: emulation
:
: - Fix trap configuration for pKVM
:
: - Close the door on initialization bugs surrounding userspace irqchip
: static key by removing it.
KVM: selftests: Don't bother deleting memslots in KVM when freeing VMs
KVM: arm64: Get rid of userspace_irqchip_in_use
KVM: arm64: Initialize trap register values in hyp in pKVM
KVM: arm64: Initialize the hypervisor's VM state at EL2
KVM: arm64: Refactor kvm_vcpu_enable_ptrauth() for hyp use
KVM: arm64: Move pkvm_vcpu_init_traps() to init_pkvm_hyp_vcpu()
KVM: arm64: Don't map 'kvm_vgic_global_state' at EL2 with pKVM
KVM: arm64: Just advertise SEIS as 0 when emulating ICC_CTLR_EL1
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
When freeing a VM, don't call into KVM to manually remove each memslot,
simply cleanup and free any userspace assets associated with the memory
region. KVM is ultimately responsible for ensuring kernel resources are
freed when the VM is destroyed, deleting memslots one-by-one is
unnecessarily slow, and unless a test is already leaking the VM fd, the
VM will be destroyed when kvm_vm_release() is called.
Not deleting KVM's memslot also allows cleaning up dead VMs without having
to care whether or not the to-be-freed VM is dead or alive.
Reported-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/kvmarm/Zy0bcM0m-N18gAZz@google.com/
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Introduce logic in the code generators to emit maxsize (XDR
width) definitions. In C, these are pre-processor macros.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Not yet complete.
The tool doesn't do any math yet. Thus, even though the maximum XDR
width of a union is the width of the union enumerator plus the width
of its largest arm, we're using the sum of all the elements of the
union for the moment.
This means that buffer size requirements are overestimated, and that
the generated maxsize macro cannot yet be used for determining data
element alignment in the XDR buffer.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
The XDR width of a pointer type is the sum of the widths of each of
the struct's fields, except for the last field. The width of the
implicit boolean "value follows" field is added as well.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
